From 3d63abe56be2147891b3438cb3bd37a9be72bda7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 24 Apr 2006 11:27:02 +0100 Subject: [MMC] pxamci: fix data timeout calculation The MMC layer gives us two parts for the timeout calculation - a fixed timeout in nanoseconds, and a card clock-speed dependent part. The PXA MMC hardware allows for a timeout based on the fixed host clock speed only. This resulted in some cards being given a short timeout, and therefore failing to work. Signed-off-by: Russell King --- drivers/mmc/pxamci.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/mmc') diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c index eb9a882..eb42cb3 100644 --- a/drivers/mmc/pxamci.c +++ b/drivers/mmc/pxamci.c @@ -65,11 +65,6 @@ struct pxamci_host { unsigned int dma_dir; }; -static inline unsigned int ns_to_clocks(unsigned int ns) -{ - return (ns * (CLOCKRATE / 1000000) + 999) / 1000; -} - static void pxamci_stop_clock(struct pxamci_host *host) { if (readl(host->base + MMC_STAT) & STAT_CLK_EN) { @@ -113,6 +108,7 @@ static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask) static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) { unsigned int nob = data->blocks; + unsigned long long clks; unsigned int timeout; u32 dcmd; int i; @@ -125,7 +121,9 @@ static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data) writel(nob, host->base + MMC_NOB); writel(1 << data->blksz_bits, host->base + MMC_BLKLEN); - timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks; + clks = (unsigned long long)data->timeout_ns * CLOCKRATE; + do_div(clks, 1000000000UL); + timeout = (unsigned int)clks + (data->timeout_clks << host->clkrt); writel((timeout + 255) / 256, host->base + MMC_RDTO); if (data->flags & MMC_DATA_READ) { -- cgit v1.1