From e33497aaaef5ec9998cf7b007b13d74bb41be74e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:32:38 +1000 Subject: drm/radeon/kms: don't refuse LUT because no framebuffer. The fb binding might be happening in a subsequent crtc setup call. gets rid of some lut issues. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 3655d91..b8f2344 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -137,9 +137,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, if (size != 256) { return; } - if (crtc->fb == NULL) { - return; - } /* userspace palettes are always correct as is */ for (i = 0; i < 256; i++) { @@ -147,7 +144,6 @@ static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, radeon_crtc->lut_g[i] = green[i] >> 6; radeon_crtc->lut_b[i] = blue[i] >> 6; } - radeon_crtc_load_lut(crtc); } -- cgit v1.1 From f30f37def4c72e5df8d949022b806e5a4e99bbcb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:09 +0200 Subject: drm/radeon/kms: Update memory bandwidth requirements in mode_set_base hook. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The hook may change the number of bytes per pixel being scanned out, which affects the CRTC memory bandwidth requirements. E.g. booting in 8bpp and then running X in 32bpp would result in the bandwidth requirements being underestimated for the latter and consequently in CRTC FIFO underruns causing visible artifacts with 3D intensive workloads. ATOM changes only compile-tested. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 5 ++++- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 7 ++++--- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 14fa970..38a87cc 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -563,6 +563,10 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -701,7 +705,6 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, } atombios_overscan_setup(crtc, mode, adjusted_mode); atombios_scaler_setup(crtc); - radeon_bandwidth_update(rdev); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 36410f8..ec2df73 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -532,6 +532,10 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y, radeon_fb = to_radeon_framebuffer(old_fb); radeon_gem_object_unpin(radeon_fb->obj); } + + /* Bytes per pixel may have changed */ + radeon_bandwidth_update(rdev); + return 0; } @@ -1015,14 +1019,11 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); - struct drm_device *dev = crtc->dev; - struct radeon_device *rdev = dev->dev_private; /* TODO TV */ radeon_crtc_set_base(crtc, x, y, old_fb); radeon_set_crtc_timing(crtc, adjusted_mode); radeon_set_pll(crtc, adjusted_mode); - radeon_bandwidth_update(rdev); if (radeon_crtc->crtc_id == 0) { radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode); } else { -- cgit v1.1 From b5fc901002db0519093ec723fd98969bc03cd629 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Thu, 8 Oct 2009 10:44:10 +0200 Subject: drm/radeon/kms: Fix apparent typo in legacy CRTC memory bandwidth calculation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While investigating the cause of CRTC FIFO underruns, I noticed that when converting the memory bandwidth calculation from the userspace X driver code, an instance of '8.0' was apparently accidentally converted to '80'. Signed-off-by: Michel Dänzer Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 374ecac..33198dd 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2350,7 +2350,7 @@ void r100_bandwidth_update(struct radeon_device *rdev) /* Find the total latency for the display data. */ - disp_latency_overhead.full = rfixed_const(80); + disp_latency_overhead.full = rfixed_const(8); disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff); mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full; mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full; -- cgit v1.1 From 2ffb842948ba64b03986f4064140a74c1780c44b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:02:19 -0400 Subject: drm/radeon/kms: make sure LVDS panel is valid in detect() If the panel data is bogus this can lead to problems later when the hardware trys to set the mode. If the data is invalid, report LVDS as disconnected. Should fix fdo bug 24247. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e376be4..466f601 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -415,8 +415,20 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_connected; + enum drm_connector_status ret = connector_status_disconnected; + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + + /* check if panel is valid */ + if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + ret = connector_status_connected; + + } /* check acpi lid status ??? */ + radeon_connector_update_scratch_regs(connector, ret); return ret; } -- cgit v1.1 From 5f9a0eb5af16906cd31fc3e02746aa3d61fd3aa9 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:08:29 -0400 Subject: drm/radeon/kms/atom: reorder crtc dpms Based on recommendation from bios docs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 38a87cc..0a5082a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -248,18 +248,18 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) switch (mode) { case DRM_MODE_DPMS_ON: + atombios_enable_crtc(crtc, 1); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 1); - atombios_enable_crtc(crtc, 1); atombios_blank_crtc(crtc, 0); break; case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: atombios_blank_crtc(crtc, 1); - atombios_enable_crtc(crtc, 0); if (ASIC_IS_DCE3(rdev)) atombios_enable_crtc_memreq(crtc, 0); + atombios_enable_crtc(crtc, 0); break; } -- cgit v1.1 From 2606c88608122339cbd5c6b5c149a2eb74ccfe9e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 13:36:21 -0400 Subject: drm/radeon/kms/atom: add support for AdjustDisplayPll DCE3+ has an AdjustDisplayPll that will adjust the pixel clock accordingly based on the encoder/transmitter to handle special hw requirements. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 36 ++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 0a5082a..d5e6f3d 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -333,12 +333,13 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) struct drm_encoder *encoder = NULL; struct radeon_encoder *radeon_encoder = NULL; uint8_t frev, crev; - int index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); + int index; SET_PIXEL_CLOCK_PS_ALLOCATION args; PIXEL_CLOCK_PARAMETERS *spc1_ptr; PIXEL_CLOCK_PARAMETERS_V2 *spc2_ptr; PIXEL_CLOCK_PARAMETERS_V3 *spc3_ptr; - uint32_t sclock = mode->clock; + uint32_t pll_clock = mode->clock; + uint32_t adjusted_clock; uint32_t ref_div = 0, fb_div = 0, frac_fb_div = 0, post_div = 0; struct radeon_pll *pll; int pll_flags = 0; @@ -393,12 +394,34 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } } + /* DCE3+ has an AdjustDisplayPll that will adjust the pixel clock + * accordingly based on the encoder/transmitter to work around + * special hw requirements. + */ + if (ASIC_IS_DCE3(rdev)) { + ADJUST_DISPLAY_PLL_PS_ALLOCATION adjust_pll_args; + + if (!encoder) + return; + + memset(&adjust_pll_args, 0, sizeof(adjust_pll_args)); + adjust_pll_args.usPixelClock = cpu_to_le16(mode->clock / 10); + adjust_pll_args.ucTransmitterID = radeon_encoder->encoder_id; + adjust_pll_args.ucEncodeMode = atombios_get_encoder_mode(encoder); + + index = GetIndexIntoMasterTable(COMMAND, AdjustDisplayPll); + atom_execute_table(rdev->mode_info.atom_context, + index, (uint32_t *)&adjust_pll_args); + adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; + } else + adjusted_clock = mode->clock; + if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; else pll = &rdev->clock.p2pll; - radeon_compute_pll(pll, mode->clock, &sclock, &fb_div, &frac_fb_div, + radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, @@ -409,7 +432,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) switch (crev) { case 1: spc1_ptr = (PIXEL_CLOCK_PARAMETERS *) & args.sPCLKInput; - spc1_ptr->usPixelClock = cpu_to_le16(sclock); + spc1_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc1_ptr->usRefDiv = cpu_to_le16(ref_div); spc1_ptr->usFbDiv = cpu_to_le16(fb_div); spc1_ptr->ucFracFbDiv = frac_fb_div; @@ -422,7 +445,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) case 2: spc2_ptr = (PIXEL_CLOCK_PARAMETERS_V2 *) & args.sPCLKInput; - spc2_ptr->usPixelClock = cpu_to_le16(sclock); + spc2_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc2_ptr->usRefDiv = cpu_to_le16(ref_div); spc2_ptr->usFbDiv = cpu_to_le16(fb_div); spc2_ptr->ucFracFbDiv = frac_fb_div; @@ -437,7 +460,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) return; spc3_ptr = (PIXEL_CLOCK_PARAMETERS_V3 *) & args.sPCLKInput; - spc3_ptr->usPixelClock = cpu_to_le16(sclock); + spc3_ptr->usPixelClock = cpu_to_le16(mode->clock / 10); spc3_ptr->usRefDiv = cpu_to_le16(ref_div); spc3_ptr->usFbDiv = cpu_to_le16(fb_div); spc3_ptr->ucFracFbDiv = frac_fb_div; @@ -460,6 +483,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -- cgit v1.1 From 5a9bcacc0a56f0d9577494e834519480018a6cc3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 8 Oct 2009 15:09:31 -0400 Subject: drm/radeon/kms/atom: rework crtc modeset - clean up tv timing handling - unify SetCRTC_Timing and SetCRTC_UsingDTDTiming Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 221 ++++++++++--------------------- drivers/gpu/drm/radeon/radeon_atombios.c | 93 ++++++++----- drivers/gpu/drm/radeon/radeon_encoders.c | 18 +++ 3 files changed, 148 insertions(+), 184 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index d5e6f3d..7522af1 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -270,59 +270,89 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) static void atombios_set_crtc_dtd_timing(struct drm_crtc *crtc, - SET_CRTC_USING_DTD_TIMING_PARAMETERS * crtc_param) + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_USING_DTD_TIMING_PARAMETERS conv_param; + SET_CRTC_USING_DTD_TIMING_PARAMETERS args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_UsingDTDTiming); + u16 misc = 0; - conv_param.usH_Size = cpu_to_le16(crtc_param->usH_Size); - conv_param.usH_Blanking_Time = - cpu_to_le16(crtc_param->usH_Blanking_Time); - conv_param.usV_Size = cpu_to_le16(crtc_param->usV_Size); - conv_param.usV_Blanking_Time = - cpu_to_le16(crtc_param->usV_Blanking_Time); - conv_param.usH_SyncOffset = cpu_to_le16(crtc_param->usH_SyncOffset); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_SyncOffset = cpu_to_le16(crtc_param->usV_SyncOffset); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; + memset(&args, 0, sizeof(args)); + args.usH_Size = cpu_to_le16(mode->crtc_hdisplay); + args.usH_Blanking_Time = + cpu_to_le16(mode->crtc_hblank_end - mode->crtc_hdisplay); + args.usV_Size = cpu_to_le16(mode->crtc_vdisplay); + args.usV_Blanking_Time = + cpu_to_le16(mode->crtc_vblank_end - mode->crtc_vdisplay); + args.usH_SyncOffset = + cpu_to_le16(mode->crtc_hsync_start - mode->crtc_hdisplay); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_SyncOffset = + cpu_to_le16(mode->crtc_vsync_start - mode->crtc_vdisplay); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + /*args.ucH_Border = mode->hborder;*/ + /*args.ucV_Border = mode->vborder;*/ + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc dtd timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -void atombios_crtc_set_timing(struct drm_crtc *crtc, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION * - crtc_param) +static void atombios_crtc_set_timing(struct drm_crtc *crtc, + struct drm_display_mode *mode) { + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION conv_param; + SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION args; int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_Timing); + u16 misc = 0; - conv_param.usH_Total = cpu_to_le16(crtc_param->usH_Total); - conv_param.usH_Disp = cpu_to_le16(crtc_param->usH_Disp); - conv_param.usH_SyncStart = cpu_to_le16(crtc_param->usH_SyncStart); - conv_param.usH_SyncWidth = cpu_to_le16(crtc_param->usH_SyncWidth); - conv_param.usV_Total = cpu_to_le16(crtc_param->usV_Total); - conv_param.usV_Disp = cpu_to_le16(crtc_param->usV_Disp); - conv_param.usV_SyncStart = cpu_to_le16(crtc_param->usV_SyncStart); - conv_param.usV_SyncWidth = cpu_to_le16(crtc_param->usV_SyncWidth); - conv_param.susModeMiscInfo.usAccess = - cpu_to_le16(crtc_param->susModeMiscInfo.usAccess); - conv_param.ucCRTC = crtc_param->ucCRTC; - conv_param.ucOverscanRight = crtc_param->ucOverscanRight; - conv_param.ucOverscanLeft = crtc_param->ucOverscanLeft; - conv_param.ucOverscanBottom = crtc_param->ucOverscanBottom; - conv_param.ucOverscanTop = crtc_param->ucOverscanTop; - conv_param.ucReserved = crtc_param->ucReserved; + memset(&args, 0, sizeof(args)); + args.usH_Total = cpu_to_le16(mode->crtc_htotal); + args.usH_Disp = cpu_to_le16(mode->crtc_hdisplay); + args.usH_SyncStart = cpu_to_le16(mode->crtc_hsync_start); + args.usH_SyncWidth = + cpu_to_le16(mode->crtc_hsync_end - mode->crtc_hsync_start); + args.usV_Total = cpu_to_le16(mode->crtc_vtotal); + args.usV_Disp = cpu_to_le16(mode->crtc_vdisplay); + args.usV_SyncStart = cpu_to_le16(mode->crtc_vsync_start); + args.usV_SyncWidth = + cpu_to_le16(mode->crtc_vsync_end - mode->crtc_vsync_start); + + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + misc |= ATOM_VSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + misc |= ATOM_HSYNC_POLARITY; + if (mode->flags & DRM_MODE_FLAG_CSYNC) + misc |= ATOM_COMPOSITESYNC; + if (mode->flags & DRM_MODE_FLAG_INTERLACE) + misc |= ATOM_INTERLACE; + if (mode->flags & DRM_MODE_FLAG_DBLSCAN) + misc |= ATOM_DOUBLE_CLOCK_MODE; + + args.susModeMiscInfo.usAccess = cpu_to_le16(misc); + args.ucCRTC = radeon_crtc->crtc_id; printk("executing set crtc timing\n"); - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&conv_param); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) @@ -602,128 +632,17 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; - struct drm_encoder *encoder; - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION crtc_timing; - int need_tv_timings = 0; - bool ret; /* TODO color tiling */ - memset(&crtc_timing, 0, sizeof(crtc_timing)); - - list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { - /* find tv std */ - if (encoder->crtc == crtc) { - struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { - struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; - if (tv_dac) { - if (tv_dac->tv_std == TV_STD_NTSC || - tv_dac->tv_std == TV_STD_NTSC_J || - tv_dac->tv_std == TV_STD_PAL_M) - need_tv_timings = 1; - else - need_tv_timings = 2; - break; - } - } - } - } - - crtc_timing.ucCRTC = radeon_crtc->crtc_id; - if (need_tv_timings) { - ret = radeon_atom_get_tv_timings(rdev, need_tv_timings - 1, - &crtc_timing, &adjusted_mode->clock); - if (ret == false) - need_tv_timings = 0; - } - - if (!need_tv_timings) { - crtc_timing.usH_Total = adjusted_mode->crtc_htotal; - crtc_timing.usH_Disp = adjusted_mode->crtc_hdisplay; - crtc_timing.usH_SyncStart = adjusted_mode->crtc_hsync_start; - crtc_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - adjusted_mode->crtc_hsync_start; - - crtc_timing.usV_Total = adjusted_mode->crtc_vtotal; - crtc_timing.usV_Disp = adjusted_mode->crtc_vdisplay; - crtc_timing.usV_SyncStart = adjusted_mode->crtc_vsync_start; - crtc_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - adjusted_mode->crtc_vsync_start; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_timing.susModeMiscInfo.usAccess |= ATOM_DOUBLE_CLOCK_MODE; - } atombios_crtc_set_pll(crtc, adjusted_mode); - atombios_crtc_set_timing(crtc, &crtc_timing); + atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) atombios_crtc_set_base(crtc, x, y, old_fb); else { - if (radeon_crtc->crtc_id == 0) { - SET_CRTC_USING_DTD_TIMING_PARAMETERS crtc_dtd_timing; - memset(&crtc_dtd_timing, 0, sizeof(crtc_dtd_timing)); - - /* setup FP shadow regs on R4xx */ - crtc_dtd_timing.ucCRTC = radeon_crtc->crtc_id; - crtc_dtd_timing.usH_Size = adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Size = adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_Blanking_Time = - adjusted_mode->crtc_hblank_end - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_Blanking_Time = - adjusted_mode->crtc_vblank_end - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncOffset = - adjusted_mode->crtc_hsync_start - - adjusted_mode->crtc_hdisplay; - crtc_dtd_timing.usV_SyncOffset = - adjusted_mode->crtc_vsync_start - - adjusted_mode->crtc_vdisplay; - crtc_dtd_timing.usH_SyncWidth = - adjusted_mode->crtc_hsync_end - - adjusted_mode->crtc_hsync_start; - crtc_dtd_timing.usV_SyncWidth = - adjusted_mode->crtc_vsync_end - - adjusted_mode->crtc_vsync_start; - /* crtc_dtd_timing.ucH_Border = adjusted_mode->crtc_hborder; */ - /* crtc_dtd_timing.ucV_Border = adjusted_mode->crtc_vborder; */ - - if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_VSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_HSYNC_POLARITY; - - if (adjusted_mode->flags & DRM_MODE_FLAG_CSYNC) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_COMPOSITESYNC; - - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_INTERLACE; - - if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN) - crtc_dtd_timing.susModeMiscInfo.usAccess |= - ATOM_DOUBLE_CLOCK_MODE; - - atombios_set_crtc_dtd_timing(crtc, &crtc_dtd_timing); - } + if (radeon_crtc->crtc_id == 0) + atombios_set_crtc_dtd_timing(crtc, adjusted_mode); radeon_crtc_set_base(crtc, x, y, old_fb); radeon_legacy_atom_set_surface(crtc); } diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 5b6c08c..979ddfd 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -857,8 +857,7 @@ radeon_atombios_get_primary_dac_info(struct radeon_encoder *encoder) } bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock) + struct drm_display_mode *mode) { struct radeon_mode_info *mode_info = &rdev->mode_info; ATOM_ANALOG_TV_INFO *tv_info; @@ -866,7 +865,7 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, ATOM_DTD_FORMAT *dtd_timings; int data_index = GetIndexIntoMasterTable(DATA, AnalogTV_Info); u8 frev, crev; - uint16_t data_offset; + u16 data_offset, misc; atom_parse_data_header(mode_info->atom_context, data_index, NULL, &frev, &crev, &data_offset); @@ -876,28 +875,37 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, if (index > MAX_SUPPORTED_TV_TIMING) return false; - crtc_timing->usH_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); - crtc_timing->usH_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); - crtc_timing->usH_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); - crtc_timing->usH_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); - - crtc_timing->usV_Total = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); - crtc_timing->usV_Disp = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); - crtc_timing->usV_SyncStart = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); - crtc_timing->usV_SyncWidth = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); - - crtc_timing->susModeMiscInfo = tv_info->aModeTimings[index].susModeMiscInfo; - - crtc_timing->ucOverscanRight = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanRight); - crtc_timing->ucOverscanLeft = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanLeft); - crtc_timing->ucOverscanBottom = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanBottom); - crtc_timing->ucOverscanTop = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_OverscanTop); - *pixel_clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; + mode->crtc_htotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Total); + mode->crtc_hdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_Disp); + mode->crtc_hsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart); + mode->crtc_hsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_H_SyncWidth); + + mode->crtc_vtotal = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Total); + mode->crtc_vdisplay = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_Disp); + mode->crtc_vsync_start = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart); + mode->crtc_vsync_end = le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncStart) + + le16_to_cpu(tv_info->aModeTimings[index].usCRTC_V_SyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(tv_info->aModeTimings[index].susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(tv_info->aModeTimings[index].usPixelClock) * 10; if (index == 1) { /* PAL timings appear to have wrong values for totals */ - crtc_timing->usH_Total -= 1; - crtc_timing->usV_Total -= 1; + mode->crtc_htotal -= 1; + mode->crtc_vtotal -= 1; } break; case 2: @@ -906,17 +914,36 @@ bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, return false; dtd_timings = &tv_info_v1_2->aModeTimings[index]; - crtc_timing->usH_Total = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHBlanking_Time); - crtc_timing->usH_Disp = le16_to_cpu(dtd_timings->usHActive); - crtc_timing->usH_SyncStart = le16_to_cpu(dtd_timings->usHActive) + le16_to_cpu(dtd_timings->usHSyncOffset); - crtc_timing->usH_SyncWidth = le16_to_cpu(dtd_timings->usHSyncWidth); - crtc_timing->usV_Total = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVBlanking_Time); - crtc_timing->usV_Disp = le16_to_cpu(dtd_timings->usVActive); - crtc_timing->usV_SyncStart = le16_to_cpu(dtd_timings->usVActive) + le16_to_cpu(dtd_timings->usVSyncOffset); - crtc_timing->usV_SyncWidth = le16_to_cpu(dtd_timings->usVSyncWidth); - - crtc_timing->susModeMiscInfo.usAccess = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); - *pixel_clock = le16_to_cpu(dtd_timings->usPixClk) * 10; + mode->crtc_htotal = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHBlanking_Time); + mode->crtc_hdisplay = le16_to_cpu(dtd_timings->usHActive); + mode->crtc_hsync_start = le16_to_cpu(dtd_timings->usHActive) + + le16_to_cpu(dtd_timings->usHSyncOffset); + mode->crtc_hsync_end = mode->crtc_hsync_start + + le16_to_cpu(dtd_timings->usHSyncWidth); + + mode->crtc_vtotal = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVBlanking_Time); + mode->crtc_vdisplay = le16_to_cpu(dtd_timings->usVActive); + mode->crtc_vsync_start = le16_to_cpu(dtd_timings->usVActive) + + le16_to_cpu(dtd_timings->usVSyncOffset); + mode->crtc_vsync_end = mode->crtc_vsync_start + + le16_to_cpu(dtd_timings->usVSyncWidth); + + mode->flags = 0; + misc = le16_to_cpu(dtd_timings->susModeMiscInfo.usAccess); + if (misc & ATOM_VSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NVSYNC; + if (misc & ATOM_HSYNC_POLARITY) + mode->flags |= DRM_MODE_FLAG_NHSYNC; + if (misc & ATOM_COMPOSITESYNC) + mode->flags |= DRM_MODE_FLAG_CSYNC; + if (misc & ATOM_INTERLACE) + mode->flags |= DRM_MODE_FLAG_INTERLACE; + if (misc & ATOM_DOUBLE_CLOCK_MODE) + mode->flags |= DRM_MODE_FLAG_DBLSCAN; + + mode->clock = le16_to_cpu(dtd_timings->usPixClk) * 10; break; } return true; diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a65ab1a..3e58c6e 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -31,6 +31,10 @@ extern int atom_debug; +/* evil but including atombios.h is much worse */ +bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, + struct drm_display_mode *mode); + uint32_t radeon_get_encoder_id(struct drm_device *dev, uint32_t supported_device, uint8_t dac) { @@ -219,6 +223,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *adjusted_mode) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_device *dev = encoder->dev; + struct radeon_device *rdev = dev->dev_private; drm_mode_set_crtcinfo(adjusted_mode, 0); @@ -230,6 +236,18 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; + if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; + if (tv_dac) { + if (tv_dac->tv_std == TV_STD_NTSC || + tv_dac->tv_std == TV_STD_NTSC_J || + tv_dac->tv_std == TV_STD_PAL_M) + radeon_atom_get_tv_timings(rdev, 0, adjusted_mode); + else + radeon_atom_get_tv_timings(rdev, 1, adjusted_mode); + } + } + return true; } -- cgit v1.1 From de2103e452ec7f2db5db7c44279735688608381d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 15:14:30 -0400 Subject: drm/radeon/kms: use drm_mode directly for panel modes This reduces the number of mode format conversions needed and makes native panel mode support cleaner. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 32 ++++++++------- drivers/gpu/drm/radeon/radeon_combios.c | 64 ++++++++++++++--------------- drivers/gpu/drm/radeon/radeon_connectors.c | 55 +++++++++---------------- drivers/gpu/drm/radeon/radeon_display.c | 6 +-- drivers/gpu/drm/radeon/radeon_encoders.c | 50 ++++------------------ drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 30 +++++++------- drivers/gpu/drm/radeon/radeon_mode.h | 19 ++------- 7 files changed, 97 insertions(+), 159 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 979ddfd..79d4b77 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -798,27 +798,29 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct if (!lvds) return NULL; - lvds->native_mode.dotclock = + lvds->native_mode.clock = le16_to_cpu(lvds_info->info.sLCDTiming.usPixClk) * 10; - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usHActive); - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = le16_to_cpu(lvds_info->info.sLCDTiming.usVActive); - lvds->native_mode.hblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); - lvds->native_mode.hoverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); - lvds->native_mode.hsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); - lvds->native_mode.vblank = - le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); - lvds->native_mode.voverplus = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncOffset); - lvds->native_mode.vsync_width = - le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.htotal = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHBlanking_Time); + lvds->native_mode.hsync_start = lvds->native_mode.hdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncOffset); + lvds->native_mode.hsync_end = lvds->native_mode.hsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usHSyncWidth); + lvds->native_mode.vtotal = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVBlanking_Time); + lvds->native_mode.vsync_start = lvds->native_mode.vdisplay + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); + lvds->native_mode.vsync_end = lvds->native_mode.vsync_start + + le16_to_cpu(lvds_info->info.sLCDTiming.usVSyncWidth); lvds->panel_pwr_delay = le16_to_cpu(lvds_info->info.usOffDelayInMs); lvds->lvds_misc = lvds_info->info.ucLVDS_Misc; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); encoder->native_mode = lvds->native_mode; } diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 748265a..e91aba8 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -808,25 +808,25 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_blon_delay = (lvds_ss_gen_cntl >> RADEON_LVDS_PWRSEQ_DELAY2_SHIFT) & 0xf; if (fp_vert_stretch & RADEON_VERT_STRETCH_ENABLE) - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = ((fp_vert_stretch & RADEON_VERT_PANEL_SIZE) >> RADEON_VERT_PANEL_SHIFT) + 1; else - lvds->native_mode.panel_yres = + lvds->native_mode.vdisplay = (RREG32(RADEON_CRTC_V_TOTAL_DISP) >> 16) + 1; if (fp_horz_stretch & RADEON_HORZ_STRETCH_ENABLE) - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = (((fp_horz_stretch & RADEON_HORZ_PANEL_SIZE) >> RADEON_HORZ_PANEL_SHIFT) + 1) * 8; else - lvds->native_mode.panel_xres = + lvds->native_mode.hdisplay = ((RREG32(RADEON_CRTC_H_TOTAL_DISP) >> 16) + 1) * 8; - if ((lvds->native_mode.panel_xres < 640) || - (lvds->native_mode.panel_yres < 480)) { - lvds->native_mode.panel_xres = 640; - lvds->native_mode.panel_yres = 480; + if ((lvds->native_mode.hdisplay < 640) || + (lvds->native_mode.vdisplay < 480)) { + lvds->native_mode.hdisplay = 640; + lvds->native_mode.vdisplay = 480; } ppll_div_sel = RREG8(RADEON_CLOCK_CNTL_INDEX + 1) & 0x3; @@ -846,8 +846,8 @@ static struct radeon_encoder_lvds *radeon_legacy_get_lvds_info_from_regs(struct lvds->panel_vcc_delay = 200; DRM_INFO("Panel info derived from registers\n"); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); return lvds; } @@ -882,11 +882,11 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder DRM_INFO("Panel ID String: %s\n", stmp); - lvds->native_mode.panel_xres = RBIOS16(lcd_info + 0x19); - lvds->native_mode.panel_yres = RBIOS16(lcd_info + 0x1b); + lvds->native_mode.hdisplay = RBIOS16(lcd_info + 0x19); + lvds->native_mode.vdisplay = RBIOS16(lcd_info + 0x1b); - DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.panel_xres, - lvds->native_mode.panel_yres); + DRM_INFO("Panel Size %dx%d\n", lvds->native_mode.hdisplay, + lvds->native_mode.vdisplay); lvds->panel_vcc_delay = RBIOS16(lcd_info + 0x2c); if (lvds->panel_vcc_delay > 2000 || lvds->panel_vcc_delay < 0) @@ -944,27 +944,25 @@ struct radeon_encoder_lvds *radeon_combios_get_lvds_info(struct radeon_encoder if (tmp == 0) break; - if ((RBIOS16(tmp) == lvds->native_mode.panel_xres) && + if ((RBIOS16(tmp) == lvds->native_mode.hdisplay) && (RBIOS16(tmp + 2) == - lvds->native_mode.panel_yres)) { - lvds->native_mode.hblank = - (RBIOS16(tmp + 17) - RBIOS16(tmp + 19)) * 8; - lvds->native_mode.hoverplus = - (RBIOS16(tmp + 21) - RBIOS16(tmp + 19) - - 1) * 8; - lvds->native_mode.hsync_width = - RBIOS8(tmp + 23) * 8; - - lvds->native_mode.vblank = (RBIOS16(tmp + 24) - - RBIOS16(tmp + 26)); - lvds->native_mode.voverplus = - ((RBIOS16(tmp + 28) & 0x7ff) - - RBIOS16(tmp + 26)); - lvds->native_mode.vsync_width = - ((RBIOS16(tmp + 28) & 0xf800) >> 11); - lvds->native_mode.dotclock = - RBIOS16(tmp + 9) * 10; + lvds->native_mode.vdisplay)) { + lvds->native_mode.htotal = RBIOS16(tmp + 17) * 8; + lvds->native_mode.hsync_start = RBIOS16(tmp + 21) * 8; + lvds->native_mode.hsync_end = (RBIOS8(tmp + 23) + + RBIOS16(tmp + 21)) * 8; + + lvds->native_mode.vtotal = RBIOS16(tmp + 24); + lvds->native_mode.vsync_start = RBIOS16(tmp + 28) & 0x7ff; + lvds->native_mode.vsync_end = + ((RBIOS16(tmp + 28) & 0xf800) >> 11) + + (RBIOS16(tmp + 28) & 0x7ff); + + lvds->native_mode.clock = RBIOS16(tmp + 9) * 10; lvds->native_mode.flags = 0; + /* set crtc values */ + drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + } } } else { diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 466f601..da3a049 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -178,25 +178,13 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; - if (native_mode->panel_xres != 0 && - native_mode->panel_yres != 0 && - native_mode->dotclock != 0) { + if (native_mode->hdisplay != 0 && + native_mode->vdisplay != 0 && + native_mode->clock != 0) { mode = drm_mode_create(dev); - - mode->hdisplay = native_mode->panel_xres; - mode->vdisplay = native_mode->panel_yres; - - mode->htotal = mode->hdisplay + native_mode->hblank; - mode->hsync_start = mode->hdisplay + native_mode->hoverplus; - mode->hsync_end = mode->hsync_start + native_mode->hsync_width; - mode->vtotal = mode->vdisplay + native_mode->vblank; - mode->vsync_start = mode->vdisplay + native_mode->voverplus; - mode->vsync_end = mode->vsync_start + native_mode->vsync_width; - mode->clock = native_mode->dotclock; - mode->flags = 0; - + *mode = *native_mode; mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); @@ -210,7 +198,7 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn struct drm_device *dev = encoder->dev; struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_display_mode *mode = NULL; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; int i; struct mode_size { int w; @@ -237,10 +225,10 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn for (i = 0; i < 17; i++) { if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { - if (common_modes[i].w > native_mode->panel_xres || - common_modes[i].h > native_mode->panel_yres || - (common_modes[i].w == native_mode->panel_xres && - common_modes[i].h == native_mode->panel_yres)) + if (common_modes[i].w > native_mode->hdisplay || + common_modes[i].h > native_mode->vdisplay || + (common_modes[i].w == native_mode->hdisplay && + common_modes[i].h == native_mode->vdisplay)) continue; } if (common_modes[i].w < 320 || common_modes[i].h < 200) @@ -344,28 +332,23 @@ static void radeon_fixup_lvds_native_mode(struct drm_encoder *encoder, struct drm_connector *connector) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* Try to get native mode details from EDID if necessary */ - if (!native_mode->dotclock) { + if (!native_mode->clock) { struct drm_display_mode *t, *mode; list_for_each_entry_safe(mode, t, &connector->probed_modes, head) { - if (mode->hdisplay == native_mode->panel_xres && - mode->vdisplay == native_mode->panel_yres) { - native_mode->hblank = mode->htotal - mode->hdisplay; - native_mode->hoverplus = mode->hsync_start - mode->hdisplay; - native_mode->hsync_width = mode->hsync_end - mode->hsync_start; - native_mode->vblank = mode->vtotal - mode->vdisplay; - native_mode->voverplus = mode->vsync_start - mode->vdisplay; - native_mode->vsync_width = mode->vsync_end - mode->vsync_start; - native_mode->dotclock = mode->clock; + if (mode->hdisplay == native_mode->hdisplay && + mode->vdisplay == native_mode->vdisplay) { + *native_mode = *mode; + drm_mode_set_crtcinfo(native_mode, CRTC_INTERLACE_HALVE_V); DRM_INFO("Determined LVDS native mode details from EDID\n"); break; } } } - if (!native_mode->dotclock) { + if (!native_mode->clock) { DRM_INFO("No LVDS native mode details, disabling RMX\n"); radeon_encoder->rmx_type = RMX_OFF; } @@ -420,10 +403,10 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; /* check if panel is valid */ - if (native_mode->panel_xres >= 320 && native_mode->panel_yres >= 240) + if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240) ret = connector_status_connected; } diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index b8f2344..a20bf43 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -761,7 +761,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, radeon_crtc->rmx_type = radeon_encoder->rmx_type; memcpy(&radeon_crtc->native_mode, &radeon_encoder->native_mode, - sizeof(struct radeon_native_mode)); + sizeof(struct drm_display_mode)); first = false; } else { if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) { @@ -779,10 +779,10 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc, if (radeon_crtc->rmx_type != RMX_OFF) { fixed20_12 a, b; a.full = rfixed_const(crtc->mode.vdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_xres); + b.full = rfixed_const(radeon_crtc->native_mode.hdisplay); radeon_crtc->vsc.full = rfixed_div(a, b); a.full = rfixed_const(crtc->mode.hdisplay); - b.full = rfixed_const(radeon_crtc->native_mode.panel_yres); + b.full = rfixed_const(radeon_crtc->native_mode.vdisplay); radeon_crtc->hsc.full = rfixed_div(a, b); } else { radeon_crtc->vsc.full = rfixed_const(1); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 3e58c6e..a9d4e0a 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -171,49 +171,15 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; - struct radeon_native_mode *native_mode = &radeon_encoder->native_mode; - - if (mode->hdisplay < native_mode->panel_xres || - mode->vdisplay < native_mode->panel_yres) { - if (ASIC_IS_AVIVO(rdev)) { - adjusted_mode->hdisplay = native_mode->panel_xres; - adjusted_mode->vdisplay = native_mode->panel_yres; - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_hdisplay = native_mode->panel_xres; - adjusted_mode->crtc_vdisplay = native_mode->panel_yres; - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; - } else { - adjusted_mode->htotal = native_mode->panel_xres + native_mode->hblank; - adjusted_mode->hsync_start = native_mode->panel_xres + native_mode->hoverplus; - adjusted_mode->hsync_end = adjusted_mode->hsync_start + native_mode->hsync_width; - adjusted_mode->vtotal = native_mode->panel_yres + native_mode->vblank; - adjusted_mode->vsync_start = native_mode->panel_yres + native_mode->voverplus; - adjusted_mode->vsync_end = adjusted_mode->vsync_start + native_mode->vsync_width; - /* update crtc values */ - drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); - /* adjust crtc values */ - adjusted_mode->crtc_htotal = adjusted_mode->crtc_hdisplay + native_mode->hblank; - adjusted_mode->crtc_hsync_start = adjusted_mode->crtc_hdisplay + native_mode->hoverplus; - adjusted_mode->crtc_hsync_end = adjusted_mode->crtc_hsync_start + native_mode->hsync_width; - adjusted_mode->crtc_vtotal = adjusted_mode->crtc_vdisplay + native_mode->vblank; - adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + native_mode->voverplus; - adjusted_mode->crtc_vsync_end = adjusted_mode->crtc_vsync_start + native_mode->vsync_width; + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + if (mode->hdisplay < native_mode->hdisplay || + mode->vdisplay < native_mode->vdisplay) { + *adjusted_mode = *native_mode; + if (!ASIC_IS_AVIVO(rdev)) { + adjusted_mode->hdisplay = mode->hdisplay; + adjusted_mode->vdisplay = mode->vdisplay; } - adjusted_mode->flags = native_mode->flags; - adjusted_mode->clock = native_mode->dotclock; } } diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index ec2df73..d22a195 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -48,7 +48,7 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active; u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp; u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp; - struct radeon_native_mode *native_mode = &radeon_crtc->native_mode; + struct drm_display_mode *native_mode = &radeon_crtc->native_mode; fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) & (RADEON_VERT_STRETCH_RESERVED | @@ -95,19 +95,19 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, fp_horz_vert_active = 0; - if (native_mode->panel_xres == 0 || - native_mode->panel_yres == 0) { + if (native_mode->hdisplay == 0 || + native_mode->vdisplay == 0) { hscale = false; vscale = false; } else { - if (xres > native_mode->panel_xres) - xres = native_mode->panel_xres; - if (yres > native_mode->panel_yres) - yres = native_mode->panel_yres; + if (xres > native_mode->hdisplay) + xres = native_mode->hdisplay; + if (yres > native_mode->vdisplay) + yres = native_mode->vdisplay; - if (xres == native_mode->panel_xres) + if (xres == native_mode->hdisplay) hscale = false; - if (yres == native_mode->panel_yres) + if (yres == native_mode->vdisplay) vscale = false; } @@ -119,11 +119,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0; scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX) - / native_mode->panel_xres + 1; + / native_mode->hdisplay + 1; fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) | RADEON_HORZ_STRETCH_BLEND | RADEON_HORZ_STRETCH_ENABLE | - ((native_mode->panel_xres/8-1) << 16)); + ((native_mode->hdisplay/8-1) << 16)); } if (!vscale) @@ -131,11 +131,11 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, else { inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0; scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX) - / native_mode->panel_yres + 1; + / native_mode->vdisplay + 1; fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) | RADEON_VERT_STRETCH_ENABLE | RADEON_VERT_STRETCH_BLEND | - ((native_mode->panel_yres-1) << 12)); + ((native_mode->vdisplay-1) << 12)); } break; case RMX_CENTER: @@ -175,8 +175,8 @@ static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc, ? RADEON_CRTC_V_SYNC_POL : 0))); - fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) | - (((native_mode->panel_xres / 8) & 0x1ff) << 16)); + fp_horz_vert_active = (((native_mode->vdisplay) & 0xfff) | + (((native_mode->hdisplay / 8) & 0x1ff) << 16)); break; case RMX_OFF: default: diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index e612268..3d2631b 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -186,17 +186,6 @@ struct radeon_mode_info { }; -struct radeon_native_mode { - /* preferred mode */ - uint32_t panel_xres, panel_yres; - uint32_t hoverplus, hsync_width; - uint32_t hblank; - uint32_t voverplus, vsync_width; - uint32_t vblank; - uint32_t dotclock; - uint32_t flags; -}; - #define MAX_H_CODE_TIMING_LEN 32 #define MAX_V_CODE_TIMING_LEN 32 @@ -228,7 +217,7 @@ struct radeon_crtc { enum radeon_rmx_type rmx_type; fixed20_12 vsc; fixed20_12 hsc; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_primary_dac { @@ -248,7 +237,7 @@ struct radeon_encoder_lvds { bool use_bios_dividers; uint32_t lvds_gen_cntl; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_tv_dac { @@ -279,7 +268,7 @@ struct radeon_encoder_atom_dig { uint32_t lvds_misc; uint16_t panel_pwr_delay; /* panel mode */ - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; }; struct radeon_encoder_atom_dac { @@ -294,7 +283,7 @@ struct radeon_encoder { uint32_t flags; uint32_t pixel_clock; enum radeon_rmx_type rmx_type; - struct radeon_native_mode native_mode; + struct drm_display_mode native_mode; void *enc_priv; }; -- cgit v1.1 From 0549a061b545d232d12836f98c7c4965dd83f837 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 9 Oct 2009 18:41:19 -0400 Subject: drm/radeon/kms: also check for edid in lvds detect In case the system has bad native mode info but valid edid. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index da3a049..17d5659 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -398,8 +398,10 @@ static int radeon_lvds_mode_valid(struct drm_connector *connector, static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connector) { - enum drm_connector_status ret = connector_status_disconnected; + struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); + enum drm_connector_status ret = connector_status_disconnected; + bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -410,6 +412,15 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec ret = connector_status_connected; } + + /* check for edid as well */ + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + dret = radeon_ddc_probe(radeon_connector); + radeon_i2c_do_lock(radeon_connector, 0); + if (dret) + ret = connector_status_connected; + } /* check acpi lid status ??? */ radeon_connector_update_scratch_regs(connector, ret); -- cgit v1.1 From ceeb50279b3d05eb7ea2b67e90acb2110d09325f Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 13:54:10 +1000 Subject: drm/radeon: Revert "drm/r600: avoid assigning vb twice in blit code" This reverts commit 49c458e544ae14514209ed80ea6829ca1b18ddf0. It seems to have some side effects in the non-kms cases. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 10 +++++++--- drivers/gpu/drm/radeon/r600_blit_kms.c | 3 +-- 2 files changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index dec5010..d988eec 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -582,6 +582,8 @@ r600_blit_copy(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -617,8 +619,8 @@ r600_blit_copy(struct drm_device *dev, if (!dev_priv->blit_vb) return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x); vb[1] = 0; @@ -706,8 +708,8 @@ r600_blit_copy(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); vb[0] = i2f(dst_x / 4); vb[1] = 0; @@ -775,6 +777,8 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; + vb = r600_nomm_get_vb_ptr(dev); + if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -783,8 +787,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); + vb = r600_nomm_get_vb_ptr(dev); } - vb = r600_nomm_get_vb_ptr(dev); if (cpp == 4) { cb_format = COLOR_8_8_8_8; diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index 93108bb..acae33e 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -610,6 +610,7 @@ void r600_kms_blit_copy(struct radeon_device *rdev, DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr, size_bytes, rdev->r600_blit.vb_used); + vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) { max_bytes = 8192; @@ -652,7 +653,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); #endif } - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x); vb[1] = 0; @@ -747,7 +747,6 @@ void r600_kms_blit_copy(struct radeon_device *rdev, vb = r600_nomm_get_vb_ptr(dev); } #endif - vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used); vb[0] = i2f(dst_x / 4); vb[1] = 0; -- cgit v1.1 From 39deb2d67515086f08a672e7574716ca0d3883a5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 12 Oct 2009 14:21:19 +1000 Subject: drm/radeon/kms: fix use of index before proper initialisation. With the adjust table introduction, we need to fill out index before getting the table version. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 7522af1..3409aa3 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -454,6 +454,7 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) radeon_compute_pll(pll, adjusted_clock, &pll_clock, &fb_div, &frac_fb_div, &ref_div, &post_div, pll_flags); + index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); @@ -513,7 +514,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) } printk("executing set pll\n"); - index = GetIndexIntoMasterTable(COMMAND, SetPixelClock); atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } -- cgit v1.1 From fb06ca8f8c61dfd7cbfa2092756577ff78a26dcd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 12 Oct 2009 11:25:05 -0400 Subject: drm/radeon/kms: properly handle mode id with native mode changes drm modes are objects with indentifiers. Make sure to preserve the mode id when copying mode params. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 3 +-- drivers/gpu/drm/radeon/radeon_encoders.c | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 17d5659..729207a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -183,8 +183,7 @@ static struct drm_display_mode *radeon_fp_native_mode(struct drm_encoder *encode if (native_mode->hdisplay != 0 && native_mode->vdisplay != 0 && native_mode->clock != 0) { - mode = drm_mode_create(dev); - *mode = *native_mode; + mode = drm_mode_duplicate(dev, native_mode); mode->type = DRM_MODE_TYPE_PREFERRED | DRM_MODE_TYPE_DRIVER; drm_mode_set_name(mode); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index a9d4e0a..10845f3 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -175,11 +175,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder, if (mode->hdisplay < native_mode->hdisplay || mode->vdisplay < native_mode->vdisplay) { + int mode_id = adjusted_mode->base.id; *adjusted_mode = *native_mode; if (!ASIC_IS_AVIVO(rdev)) { adjusted_mode->hdisplay = mode->hdisplay; adjusted_mode->vdisplay = mode->vdisplay; } + adjusted_mode->base.id = mode_id; } } -- cgit v1.1 From 8c2a6d730400e14bf28ccfa11b9bbf453db775ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 14 Oct 2009 02:00:42 -0400 Subject: drm/radeon/kms: move active_device setup into encoder fixup() radeon_encoder->active_device defines the active routing between the encoder and connector. The encoder fixup and dpms functions need to know the active_device to function properly. Setting active_device in the prepare hook was too late in some cases. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 19 ++++++------------- drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 17 ++++++++--------- 2 files changed, 14 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 10845f3..6cdef27 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -194,6 +194,8 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, struct drm_device *dev = encoder->dev; struct radeon_device *rdev = dev->dev_private; + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -860,16 +862,9 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) DISPLAY_DEVICE_OUTPUT_CONTROL_PS_ALLOCATION args; int index = 0; bool is_dig = false; - int devices; memset(&args, 0, sizeof(args)); - /* on DPMS off we have no idea if active device is meaningful */ - if (mode != DRM_MODE_DPMS_ON && !radeon_encoder->active_device) - devices = radeon_encoder->devices; - else - devices = radeon_encoder->active_device; - DRM_DEBUG("encoder dpms %d to mode %d, devices %08x, active_devices %08x\n", radeon_encoder->encoder_id, mode, radeon_encoder->devices, radeon_encoder->active_device); @@ -900,18 +895,18 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) break; case ENCODER_OBJECT_ID_INTERNAL_DAC1: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC1: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC1OutputControl); break; case ENCODER_OBJECT_ID_INTERNAL_DAC2: case ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DAC2: - if (devices & (ATOM_DEVICE_TV_SUPPORT)) + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, TV1OutputControl); - else if (devices & (ATOM_DEVICE_CV_SUPPORT)) + else if (radeon_encoder->active_device & (ATOM_DEVICE_CV_SUPPORT)) index = GetIndexIntoMasterTable(COMMAND, CV1OutputControl); else index = GetIndexIntoMasterTable(COMMAND, DAC2OutputControl); @@ -1254,8 +1249,6 @@ static void radeon_atom_encoder_prepare(struct drm_encoder *encoder) { radeon_atom_output_lock(encoder, true); radeon_atom_encoder_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_atom_encoder_commit(struct drm_encoder *encoder) diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 6ceb958..3a75b5b 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -107,8 +107,6 @@ static void radeon_legacy_lvds_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_lvds_dpms(encoder, DRM_MODE_DPMS_OFF); - - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_lvds_commit(struct drm_encoder *encoder) @@ -192,6 +190,8 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder, { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); if (radeon_encoder->rmx_type != RMX_OFF) @@ -218,7 +218,8 @@ static bool radeon_legacy_primary_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -272,7 +273,6 @@ static void radeon_legacy_primary_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_primary_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_primary_dac_commit(struct drm_encoder *encoder) @@ -468,7 +468,6 @@ static void radeon_legacy_tmds_int_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_int_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_int_commit(struct drm_encoder *encoder) @@ -593,7 +592,8 @@ static bool radeon_legacy_tmds_ext_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -636,7 +636,6 @@ static void radeon_legacy_tmds_ext_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tmds_ext_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tmds_ext_commit(struct drm_encoder *encoder) @@ -735,7 +734,8 @@ static bool radeon_legacy_tv_dac_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - + /* set the active encoder to connector routing */ + radeon_encoder_set_active_device(encoder); drm_mode_set_crtcinfo(adjusted_mode, 0); return true; @@ -839,7 +839,6 @@ static void radeon_legacy_tv_dac_prepare(struct drm_encoder *encoder) else radeon_combios_output_lock(encoder, true); radeon_legacy_tv_dac_dpms(encoder, DRM_MODE_DPMS_OFF); - radeon_encoder_set_active_device(encoder); } static void radeon_legacy_tv_dac_commit(struct drm_encoder *encoder) -- cgit v1.1 From 1b4d7d75ccff38008ccd40f8e2d74e33a087caaa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 01:33:35 -0400 Subject: drm/radeon/kms: fix internal tmds setup on legacy display engine - crtc 0 routing was wrong - need to clear various timing bits in FP_GEN_CNTL - need to set FP_H/V2_SYNC_STRT_WID regs for crtc 1 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 3 +++ drivers/gpu/drm/radeon/radeon_legacy_encoders.c | 10 +++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index d22a195..8d0b7aa 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -668,6 +668,9 @@ static bool radeon_set_crtc_timing(struct drm_crtc *crtc, struct drm_display_mod WREG32(RADEON_DISP2_MERGE_CNTL, disp2_merge_cntl); WREG32(RADEON_CRTC2_GEN_CNTL, crtc2_gen_cntl); + + WREG32(RADEON_FP_H2_SYNC_STRT_WID, crtc_h_sync_strt_wid); + WREG32(RADEON_FP_V2_SYNC_STRT_WID, crtc_v_sync_strt_wid); } else { uint32_t crtc_gen_cntl; uint32_t crtc_ext_cntl; diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c index 3a75b5b..0038212 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c @@ -542,6 +542,14 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, fp_gen_cntl &= ~(RADEON_FP_FPON | RADEON_FP_TMDS_EN); + fp_gen_cntl &= ~(RADEON_FP_RMX_HVSYNC_CONTROL_EN | + RADEON_FP_DFP_SYNC_SEL | + RADEON_FP_CRT_SYNC_SEL | + RADEON_FP_CRTC_LOCK_8DOT | + RADEON_FP_USE_SHADOW_EN | + RADEON_FP_CRTC_USE_SHADOW_VEND | + RADEON_FP_CRT_SYNC_ALT); + if (1) /* FIXME rgbBits == 8 */ fp_gen_cntl |= RADEON_FP_PANEL_FORMAT; /* 24 bit format */ else @@ -555,7 +563,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder, else fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1; } else - fp_gen_cntl |= RADEON_FP_SEL_CRTC1; + fp_gen_cntl &= ~RADEON_FP_SEL_CRTC2; } else { if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) { fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK; -- cgit v1.1 From 0294cf4f7f895ddcf284b1ce7cf27a2c9d7106f7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 16:16:35 -0400 Subject: drm/radeon/kms: fix connector edid handling Based partly on a patch from Christian Koenig - fix several memory leaks in radeon_connector->edid handling - store edid in radeon_connector->edid in detect() or get_modes() - switch hdmi detect code to use radeon_connector->edid - add support for oem boards multiple connectors that share a ddc line. - short circuit lvds_detect() if have a stored edid Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 75 ++++++++++++++++++++++++------ drivers/gpu/drm/radeon/radeon_display.c | 18 ++----- drivers/gpu/drm/radeon/radeon_encoders.c | 10 ++-- drivers/gpu/drm/radeon/radeon_mode.h | 2 + 4 files changed, 73 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 729207a..5b6067a 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -400,7 +400,6 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec struct radeon_connector *radeon_connector = to_radeon_connector(connector); struct drm_encoder *encoder = radeon_best_single_encoder(connector); enum drm_connector_status ret = connector_status_disconnected; - bool dret; if (encoder) { struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); @@ -413,12 +412,17 @@ static enum drm_connector_status radeon_lvds_detect(struct drm_connector *connec } /* check for edid as well */ - if (radeon_connector->ddc_bus) { - radeon_i2c_do_lock(radeon_connector, 1); - dret = radeon_ddc_probe(radeon_connector); - radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; + if (radeon_connector->edid) + ret = connector_status_connected; + else { + if (radeon_connector->ddc_bus) { + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, + &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + if (radeon_connector->edid) + ret = connector_status_connected; + } } /* check acpi lid status ??? */ @@ -432,6 +436,8 @@ static void radeon_connector_destroy(struct drm_connector *connector) if (radeon_connector->ddc_bus) radeon_i2c_destroy(radeon_connector->ddc_bus); + if (radeon_connector->edid) + kfree(radeon_connector->edid); kfree(radeon_connector->con_priv); drm_sysfs_connector_remove(connector); drm_connector_cleanup(connector); @@ -519,9 +525,32 @@ static enum drm_connector_status radeon_vga_detect(struct drm_connector *connect radeon_i2c_do_lock(radeon_connector, 1); dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); - if (dret) - ret = connector_status_connected; - else { + if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } + radeon_i2c_do_lock(radeon_connector, 1); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_i2c_do_lock(radeon_connector, 0); + + if (!radeon_connector->edid) { + DRM_ERROR("DDC responded but not EDID found for %s\n", + drm_get_connector_name(connector)); + } else { + radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); + + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if (radeon_connector->use_digital && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; + } + } else { if (radeon_connector->dac_load_detect) { encoder_funcs = encoder->helper_private; ret = encoder_funcs->detect(encoder, connector); @@ -649,6 +678,10 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect dret = radeon_ddc_probe(radeon_connector); radeon_i2c_do_lock(radeon_connector, 0); if (dret) { + if (radeon_connector->edid) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + } radeon_i2c_do_lock(radeon_connector, 1); radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); @@ -659,10 +692,15 @@ static enum drm_connector_status radeon_dvi_detect(struct drm_connector *connect } else { radeon_connector->use_digital = !!(radeon_connector->edid->input & DRM_EDID_INPUT_DIGITAL); - /* if this isn't a digital monitor - then we need to make sure we don't have any - TV conflicts */ - ret = connector_status_connected; + /* some oems have boards with separate digital and analog connectors + * with a shared ddc line (often vga + hdmi) + */ + if ((!radeon_connector->use_digital) && radeon_connector->shared_ddc) { + kfree(radeon_connector->edid); + radeon_connector->edid = NULL; + ret = connector_status_disconnected; + } else + ret = connector_status_connected; } } @@ -787,6 +825,7 @@ radeon_add_atom_connector(struct drm_device *dev, struct radeon_connector *radeon_connector; struct radeon_connector_atom_dig *radeon_dig_connector; uint32_t subpixel_order = SubPixelNone; + bool shared_ddc = false; int ret; /* fixme - tv/cv/din */ @@ -800,6 +839,13 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->devices |= supported_device; return; } + if (radeon_connector->ddc_bus && i2c_bus->valid) { + if (memcmp(&radeon_connector->ddc_bus->rec, i2c_bus, + sizeof(struct radeon_i2c_bus_rec)) == 0) { + radeon_connector->shared_ddc = true; + shared_ddc = true; + } + } } radeon_connector = kzalloc(sizeof(struct radeon_connector), GFP_KERNEL); @@ -810,6 +856,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->shared_ddc = shared_ddc; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index a20bf43..c85df4a 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -334,27 +334,19 @@ static bool radeon_setup_enc_conn(struct drm_device *dev) int radeon_ddc_get_modes(struct radeon_connector *radeon_connector) { - struct edid *edid; int ret = 0; if (!radeon_connector->ddc_bus) return -1; if (!radeon_connector->edid) { radeon_i2c_do_lock(radeon_connector, 1); - edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); + radeon_connector->edid = drm_get_edid(&radeon_connector->base, &radeon_connector->ddc_bus->adapter); radeon_i2c_do_lock(radeon_connector, 0); - } else - edid = radeon_connector->edid; + } - if (edid) { - /* update digital bits here */ - if (edid->input & DRM_EDID_INPUT_DIGITAL) - radeon_connector->use_digital = 1; - else - radeon_connector->use_digital = 0; - drm_mode_connector_update_edid_property(&radeon_connector->base, edid); - ret = drm_add_edid_modes(&radeon_connector->base, edid); - kfree(edid); + if (radeon_connector->edid) { + drm_mode_connector_update_edid_property(&radeon_connector->base, radeon_connector->edid); + ret = drm_add_edid_modes(&radeon_connector->base, radeon_connector->edid); return ret; } drm_mode_connector_update_edid_property(&radeon_connector->base, NULL); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 6cdef27..b70440e 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -449,7 +449,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) case 1: args.v1.ucMisc = 0; args.v1.ucAction = action; - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v1.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { @@ -474,7 +474,7 @@ atombios_digital_setup(struct drm_encoder *encoder, int action) if (dig->coherent_mode) args.v2.ucMisc |= PANEL_ENCODER_MISC_COHERENT; } - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) args.v2.ucMisc |= PANEL_ENCODER_MISC_HDMI_TYPE; args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); args.v2.ucTruncate = 0; @@ -532,7 +532,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) switch (connector->connector_type) { case DRM_MODE_CONNECTOR_DVII: case DRM_MODE_CONNECTOR_HDMIB: /* HDMI-B is basically DL-DVI; analog works fine */ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else if (radeon_connector->use_digital) return ATOM_ENCODER_MODE_DVI; @@ -542,7 +542,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) case DRM_MODE_CONNECTOR_DVID: case DRM_MODE_CONNECTOR_HDMIA: default: - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; @@ -554,7 +554,7 @@ atombios_get_encoder_mode(struct drm_encoder *encoder) /*if (radeon_output->MonType == MT_DP) return ATOM_ENCODER_MODE_DP; else*/ - if (drm_detect_hdmi_monitor((struct edid *)connector->edid_blob_ptr)) + if (drm_detect_hdmi_monitor(radeon_connector->edid)) return ATOM_ENCODER_MODE_HDMI; else return ATOM_ENCODER_MODE_DVI; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 3d2631b..b6868fb 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -297,6 +297,8 @@ struct radeon_connector { uint32_t connector_id; uint32_t devices; struct radeon_i2c_chan *ddc_bus; + /* some systems have a an hdmi and vga port with a shared ddc line */ + bool shared_ddc; bool use_digital; /* we need to mind the EDID between detect and get modes due to analog/digital/tvencoder */ -- cgit v1.1 From ceefedd8e8a80b743fa0b6d6b1992be7029a9efb Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 23:57:47 -0400 Subject: drm/radeon/kms/atom: fix tv-out D1MODE_INTERLEAVE_EN was getting set in some cases in the encoder quirks function due to the changes in 5a9bcacc0a56f0d9577494e834519480018a6cc3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ---- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++--- 2 files changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 3409aa3..f7dcb69 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -31,10 +31,6 @@ #include "atom.h" #include "atom-bits.h" -/* evil but including atombios.h is much worse */ -bool radeon_atom_get_tv_timings(struct radeon_device *rdev, int index, - SET_CRTC_TIMING_PARAMETERS_PS_ALLOCATION *crtc_timing, - int32_t *pixel_clock); static void atombios_overscan_setup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index b70440e..2aa5994 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -206,7 +206,7 @@ static bool radeon_atom_mode_fixup(struct drm_encoder *encoder, && (mode->crtc_vsync_start < (mode->crtc_vdisplay + 2))) adjusted_mode->crtc_vsync_start = adjusted_mode->crtc_vdisplay + 2; - if (radeon_encoder->active_device & ATOM_DEVICE_TV_SUPPORT) { + if (radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT)) { struct radeon_encoder_atom_dac *tv_dac = radeon_encoder->enc_priv; if (tv_dac) { if (tv_dac->tv_std == TV_STD_NTSC || @@ -1085,8 +1085,11 @@ atombios_apply_encoder_quirks(struct drm_encoder *encoder, } /* set scaler clears this on some chips */ - if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) - WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, AVIVO_D1MODE_INTERLEAVE_EN); + if (!(radeon_encoder->active_device & (ATOM_DEVICE_TV_SUPPORT))) { + if (ASIC_IS_AVIVO(rdev) && (mode->flags & DRM_MODE_FLAG_INTERLACE)) + WREG32(AVIVO_D1MODE_DATA_FORMAT + radeon_crtc->crtc_offset, + AVIVO_D1MODE_INTERLEAVE_EN); + } } static void -- cgit v1.1 From dfdd646773941bb6b22c3898a26a109e57c872a2 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 13 Oct 2009 12:48:44 -0400 Subject: drm/radeon/kms: limit default tv modes to <= 1024x768 fixes fdo bug 24496 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index 5b6067a..ce3a785 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -223,6 +223,11 @@ static void radeon_add_common_modes(struct drm_encoder *encoder, struct drm_conn }; for (i = 0; i < 17; i++) { + if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) { + if (common_modes[i].w > 1024 || + common_modes[i].h > 768) + continue; + } if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { if (common_modes[i].w > native_mode->hdisplay || common_modes[i].h > native_mode->vdisplay || -- cgit v1.1 From a77f171843d466d4af0d527bcb2d314fafa8afd7 Mon Sep 17 00:00:00 2001 From: Matt Turner Date: Wed, 14 Oct 2009 00:34:41 -0400 Subject: drm/radeon/kms: use RADEON_GPU_PAGE_SIZE instead of 4096 Signed-off-by: Matt Turner Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 2 +- drivers/gpu/drm/radeon/r300.c | 2 +- drivers/gpu/drm/radeon/r600.c | 10 +++++----- drivers/gpu/drm/radeon/radeon.h | 2 ++ drivers/gpu/drm/radeon/radeon_benchmark.c | 4 ++-- drivers/gpu/drm/radeon/radeon_gart.c | 20 ++++++++++---------- drivers/gpu/drm/radeon/radeon_test.c | 6 +++--- 7 files changed, 24 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 33198dd..c22adff 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -240,7 +240,7 @@ int r100_wb_init(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c index e08c4a8..2f43ee8 100644 --- a/drivers/gpu/drm/radeon/r300.c +++ b/drivers/gpu/drm/radeon/r300.c @@ -113,7 +113,7 @@ int rv370_pcie_gart_enable(struct radeon_device *rdev) tmp = RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD; WREG32_PCIE(RADEON_PCIE_TX_GART_CNTL, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_LO, rdev->mc.gtt_location); - tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 4096; + tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - RADEON_GPU_PAGE_SIZE; WREG32_PCIE(RADEON_PCIE_TX_GART_END_LO, tmp); WREG32_PCIE(RADEON_PCIE_TX_GART_START_HI, 0); WREG32_PCIE(RADEON_PCIE_TX_GART_END_HI, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 6b43a95..1b5aa1f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1269,9 +1269,9 @@ int r600_cp_resume(struct radeon_device *rdev) rb_bufsz = drm_order(rdev->cp.ring_size / 8); #ifdef __BIG_ENDIAN WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(4096/8) << 8) | rb_bufsz); + (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(4096/8) << 8) | rb_bufsz); + WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); #endif WREG32(CP_SEM_WAIT_TIMER, 0x4); @@ -1400,7 +1400,7 @@ int r600_wb_enable(struct radeon_device *rdev) int r; if (rdev->wb.wb_obj == NULL) { - r = radeon_object_create(rdev, NULL, 4096, true, + r = radeon_object_create(rdev, NULL, RADEON_GPU_PAGE_SIZE, true, RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj); if (r) { dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r); @@ -1450,8 +1450,8 @@ int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence) { - r600_blit_prepare_copy(rdev, num_pages * 4096); - r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * 4096); + r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); return 0; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 3598adc..8b60e36 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -276,6 +276,8 @@ union radeon_gart_table { struct radeon_gart_table_vram vram; }; +#define RADEON_GPU_PAGE_SIZE 4096 + struct radeon_gart { dma_addr_t table_addr; unsigned num_gpu_pages; diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c index 2e938f7..10bd50a 100644 --- a/drivers/gpu/drm/radeon/radeon_benchmark.c +++ b/drivers/gpu/drm/radeon/radeon_benchmark.c @@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_dma(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } @@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize, if (r) { goto out_cleanup; } - r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence); + r = radeon_copy_blit(rdev, saddr, daddr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { goto out_cleanup; } diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c index a931af0..a68d756 100644 --- a/drivers/gpu/drm/radeon/radeon_gart.c +++ b/drivers/gpu/drm/radeon/radeon_gart.c @@ -140,15 +140,15 @@ void radeon_gart_unbind(struct radeon_device *rdev, unsigned offset, WARN(1, "trying to unbind memory to unitialized GART !\n"); return; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { if (rdev->gart.pages[p]) { pci_unmap_page(rdev->pdev, rdev->gart.pages_addr[p], PAGE_SIZE, PCI_DMA_BIDIRECTIONAL); rdev->gart.pages[p] = NULL; rdev->gart.pages_addr[p] = 0; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, 0); } } @@ -169,8 +169,8 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, DRM_ERROR("trying to bind memory to unitialized GART !\n"); return -EINVAL; } - t = offset / 4096; - p = t / (PAGE_SIZE / 4096); + t = offset / RADEON_GPU_PAGE_SIZE; + p = t / (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); for (i = 0; i < pages; i++, p++) { /* we need to support large memory configurations */ @@ -185,9 +185,9 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset, } rdev->gart.pages[p] = pagelist[i]; page_base = rdev->gart.pages_addr[p]; - for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) { + for (j = 0; j < (PAGE_SIZE / RADEON_GPU_PAGE_SIZE); j++, t++) { radeon_gart_set_page(rdev, t, page_base); - page_base += 4096; + page_base += RADEON_GPU_PAGE_SIZE; } } mb(); @@ -200,14 +200,14 @@ int radeon_gart_init(struct radeon_device *rdev) if (rdev->gart.pages) { return 0; } - /* We need PAGE_SIZE >= 4096 */ - if (PAGE_SIZE < 4096) { + /* We need PAGE_SIZE >= RADEON_GPU_PAGE_SIZE */ + if (PAGE_SIZE < RADEON_GPU_PAGE_SIZE) { DRM_ERROR("Page size is smaller than GPU page size!\n"); return -EINVAL; } /* Compute table size */ rdev->gart.num_cpu_pages = rdev->mc.gtt_size / PAGE_SIZE; - rdev->gart.num_gpu_pages = rdev->mc.gtt_size / 4096; + rdev->gart.num_gpu_pages = rdev->mc.gtt_size / RADEON_GPU_PAGE_SIZE; DRM_INFO("GART: num cpu pages %u, num gpu pages %u\n", rdev->gart.num_cpu_pages, rdev->gart.num_gpu_pages); /* Allocate pages table */ diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index 03c33cf..f8a465d 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -42,7 +42,7 @@ void radeon_test_moves(struct radeon_device *rdev) /* Number of tests = * (Total GTT - IB pool - writeback page - ring buffer) / test size */ - n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 - + n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - RADEON_GPU_PAGE_SIZE - rdev->cp.ring_size) / size; gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL); @@ -102,7 +102,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence); + r = radeon_copy(rdev, gtt_addr, vram_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed GTT->VRAM copy %d\n", i); goto out_cleanup; @@ -145,7 +145,7 @@ void radeon_test_moves(struct radeon_device *rdev) goto out_cleanup; } - r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence); + r = radeon_copy(rdev, vram_addr, gtt_addr, size / RADEON_GPU_PAGE_SIZE, fence); if (r) { DRM_ERROR("Failed VRAM->GTT copy %d\n", i); goto out_cleanup; -- cgit v1.1 From f059d2ad69b056aeabad4460f706a3df2f77ce50 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 Oct 2009 09:11:25 +0800 Subject: drm: Add the basic check for the detailed timing in EDID Sometimes we will get the incorrect display modeline when parsing the detailed timing in EDID. For example: >hsync/vsync width is zero >sync is beyond the blank. So add the basic check for the detailed timing in EDID to avoid the incorrect display modeline. Signed-off-by: Zhao Yakui Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_edid.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 3c0d2b3..cea665d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -626,6 +626,12 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, return NULL; } + /* it is incorrect if hsync/vsync width is zero */ + if (!hsync_pulse_width || !vsync_pulse_width) { + DRM_DEBUG_KMS("Incorrect Detailed timing. " + "Wrong Hsync/Vsync pulse width\n"); + return NULL; + } mode = drm_mode_create(dev); if (!mode) return NULL; @@ -647,6 +653,15 @@ static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev, mode->vsync_end = mode->vsync_start + vsync_pulse_width; mode->vtotal = mode->vdisplay + vblank; + /* perform the basic check for the detailed timing */ + if (mode->hsync_end > mode->htotal || + mode->vsync_end > mode->vtotal) { + drm_mode_destroy(dev, mode); + DRM_DEBUG_KMS("Incorrect detailed timing. " + "Sync is beyond the blank.\n"); + return NULL; + } + drm_mode_set_name(mode); if (pt->misc & DRM_EDID_PT_INTERLACED) -- cgit v1.1 From 2d152c6ba81c8a7776103b517fa454b8da0419aa Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:08:05 -0400 Subject: drm/radeon/kms: fix legacy quirk handling Need to check the return type for the quirk function to decide whether we add the connectors and encoders. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index e91aba8..3c402b9 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1626,8 +1626,9 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) break; } - radeon_apply_legacy_quirks(dev, i, &connector, - &ddc_i2c); + if (!radeon_apply_legacy_quirks(dev, i, &connector, + &ddc_i2c)) + continue; switch (connector) { case CONNECTOR_PROPRIETARY_LEGACY: -- cgit v1.1 From d0c403e950d449c8c413a1fbf05dfec45ce03e55 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:38:32 -0400 Subject: drm/radeon/kms: fix support for original r100 Original radeon didn't have a connector table in the bios. Check for the CRT table and if we have one, add a VGA connector. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 3c402b9..8298c99 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1773,8 +1773,25 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) DRM_MODE_CONNECTOR_DVII, &ddc_i2c); } else { - DRM_DEBUG("No connector info found\n"); - return false; + uint16_t crt_info = + combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); + DRM_DEBUG("Found CRT table, assuming VGA connector\n"); + if (crt_info) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id(dev, + ATOM_DEVICE_CRT1_SUPPORT, + 1), + ATOM_DEVICE_CRT1_SUPPORT); + ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); + radeon_add_legacy_connector(dev, + 0, + ATOM_DEVICE_CRT1_SUPPORT, + DRM_MODE_CONNECTOR_VGA, + &ddc_i2c); + } else { + DRM_DEBUG("No connector info found\n"); + return false; + } } } -- cgit v1.1 From c850cb782626fda78e5e9e5baf18a5bd806a225c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 23 Oct 2009 18:49:03 +1000 Subject: drm/kms: fix kms/fbdev colormap support properly. This sets the fbcon to use TRUECOLOR by default, it then only modifies the pseudo palette for fbcon, and only touches the real palette when in 8-bit pseudo color mode. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 42 ++++++++++++++++++++++++++++------------- 1 file changed, 29 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 23dc9c1..9c92461 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -454,22 +454,39 @@ out_free: } EXPORT_SYMBOL(drm_fb_helper_init_crtc_count); -static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, +static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, u16 regno, struct fb_info *info) { struct drm_fb_helper *fb_helper = info->par; struct drm_framebuffer *fb = fb_helper->fb; int pindex; + if (info->fix.visual == FB_VISUAL_TRUECOLOR) { + u32 *palette; + u32 value; + /* place color in psuedopalette */ + if (regno > 16) + return -EINVAL; + palette = (u32 *)info->pseudo_palette; + red >>= (16 - info->var.red.length); + green >>= (16 - info->var.green.length); + blue >>= (16 - info->var.blue.length); + value = (red << info->var.red.offset) | + (green << info->var.green.offset) | + (blue << info->var.blue.offset); + palette[regno] = value; + return 0; + } + pindex = regno; if (fb->bits_per_pixel == 16) { pindex = regno << 3; if (fb->depth == 16 && regno > 63) - return; + return -EINVAL; if (fb->depth == 15 && regno > 31) - return; + return -EINVAL; if (fb->depth == 16) { u16 r, g, b; @@ -493,13 +510,7 @@ static void setcolreg(struct drm_crtc *crtc, u16 red, u16 green, if (fb->depth != 16) fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex); - - if (regno < 16 && info->fix.visual == FB_VISUAL_DIRECTCOLOR) { - ((u32 *) fb->pseudo_palette)[regno] = - (regno << info->var.red.offset) | - (regno << info->var.green.offset) | - (regno << info->var.blue.offset); - } + return 0; } int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) @@ -536,7 +547,9 @@ int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info) if (transp) htransp = *transp++; - setcolreg(crtc, hred, hgreen, hblue, start++, info); + rc = setcolreg(crtc, hred, hgreen, hblue, start++, info); + if (rc) + return rc; } crtc_funcs->load_lut(crtc); } @@ -555,6 +568,7 @@ int drm_fb_helper_setcolreg(unsigned regno, struct drm_device *dev = fb_helper->dev; struct drm_crtc *crtc; int i; + int ret; if (regno > 255) return 1; @@ -568,8 +582,10 @@ int drm_fb_helper_setcolreg(unsigned regno, if (i == fb_helper->crtc_count) continue; + ret = setcolreg(crtc, red, green, blue, regno, info); + if (ret) + return ret; - setcolreg(crtc, red, green, blue, regno, info); crtc_funcs->load_lut(crtc); } return 0; @@ -928,7 +944,7 @@ void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch, { info->fix.type = FB_TYPE_PACKED_PIXELS; info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR : - FB_VISUAL_DIRECTCOLOR; + FB_VISUAL_TRUECOLOR; info->fix.type_aux = 0; info->fix.xpanstep = 1; /* doing it in hw */ info->fix.ypanstep = 1; /* doing it in hw */ -- cgit v1.1 From ceb776bc87280eb8d13f38e4d7afae757e95af44 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 12:50:41 -0400 Subject: drm/radeon/kms: fix cs parser tex bit 11 check The problem boils down to the order when the bit11 of the texture size is or'ed to the original width. In the end each mipmap level has the same width or height because of that 11 bit is ored to the scaled down lod with and thus blows up the size again to the full size or more due to the power of two rounding afterwards. The attached patch changes this order so that the texture sizes are computed correct. Also the on error the yet missing inputs to the size computation are printed which helped me to find out where it really breaks. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index c22adff..ed5e983 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2548,8 +2548,11 @@ void r100_bandwidth_update(struct radeon_device *rdev) static inline void r100_cs_track_texture_print(struct r100_cs_track_texture *t) { DRM_ERROR("pitch %d\n", t->pitch); + DRM_ERROR("use_pitch %d\n", t->use_pitch); DRM_ERROR("width %d\n", t->width); + DRM_ERROR("width_11 %d\n", t->width_11); DRM_ERROR("height %d\n", t->height); + DRM_ERROR("height_11 %d\n", t->height_11); DRM_ERROR("num levels %d\n", t->num_levels); DRM_ERROR("depth %d\n", t->txdepth); DRM_ERROR("bpp %d\n", t->cpp); @@ -2609,15 +2612,17 @@ static int r100_cs_track_texture_check(struct radeon_device *rdev, else w = track->textures[u].pitch / (1 << i); } else { - w = track->textures[u].width / (1 << i); + w = track->textures[u].width; if (rdev->family >= CHIP_RV515) w |= track->textures[u].width_11; + w = w / (1 << i); if (track->textures[u].roundup_w) w = roundup_pow_of_two(w); } - h = track->textures[u].height / (1 << i); + h = track->textures[u].height; if (rdev->family >= CHIP_RV515) h |= track->textures[u].height_11; + h = h / (1 << i); if (track->textures[u].roundup_h) h = roundup_pow_of_two(h); size += w * h; -- cgit v1.1 From 5885b7a9f4d2a0405b7e42d44eab4ed2302a8239 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 19 Oct 2009 17:23:33 -0400 Subject: drm/radeon/kms: fix vram_width calculation on r6xx/r7xx Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 29 +++++++++++++++++------------ drivers/gpu/drm/radeon/r600d.h | 4 ++++ drivers/gpu/drm/radeon/rv770.c | 30 ++++++++++++++++++++++++++---- drivers/gpu/drm/radeon/rv770d.h | 5 +++++ 4 files changed, 52 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 1b5aa1f..e87475c 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -339,11 +339,10 @@ int r600_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; - int chansize; + int chansize, numchan; int r; /* Get VRAM informations */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; tmp = RREG32(RAMCFG); if (tmp & CHANSIZE_OVERRIDE) { @@ -353,17 +352,23 @@ int r600_mc_init(struct radeon_device *rdev) } else { chansize = 32; } - if (rdev->family == CHIP_R600) { - rdev->mc.vram_width = 8 * chansize; - } else if (rdev->family == CHIP_RV670) { - rdev->mc.vram_width = 4 * chansize; - } else if ((rdev->family == CHIP_RV610) || - (rdev->family == CHIP_RV620)) { - rdev->mc.vram_width = chansize; - } else if ((rdev->family == CHIP_RV630) || - (rdev->family == CHIP_RV635)) { - rdev->mc.vram_width = 2 * chansize; + tmp = RREG32(CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 5084595..cf238bf 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -270,6 +270,10 @@ #define PCIE_PORT_INDEX 0x0038 #define PCIE_PORT_DATA 0x003C +#define CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define RAMCFG 0x2408 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000001 diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 595ac63..4055391 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -774,14 +774,36 @@ int rv770_mc_init(struct radeon_device *rdev) { fixed20_12 a; u32 tmp; + int chansize, numchan; int r; /* Get VRAM informations */ - /* FIXME: Don't know how to determine vram width, need to check - * vram_width usage - */ - rdev->mc.vram_width = 128; rdev->mc.vram_is_ddr = true; + tmp = RREG32(MC_ARB_RAMCFG); + if (tmp & CHANSIZE_OVERRIDE) { + chansize = 16; + } else if (tmp & CHANSIZE_MASK) { + chansize = 64; + } else { + chansize = 32; + } + tmp = RREG32(MC_SHARED_CHMAP); + switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) { + case 0: + default: + numchan = 1; + break; + case 1: + numchan = 2; + break; + case 2: + numchan = 4; + break; + case 3: + numchan = 8; + break; + } + rdev->mc.vram_width = numchan * chansize; /* Could aper size report 0 ? */ rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0); rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0); diff --git a/drivers/gpu/drm/radeon/rv770d.h b/drivers/gpu/drm/radeon/rv770d.h index 4b9c3d6..a1367ab 100644 --- a/drivers/gpu/drm/radeon/rv770d.h +++ b/drivers/gpu/drm/radeon/rv770d.h @@ -129,6 +129,10 @@ #define HDP_REG_COHERENCY_FLUSH_CNTL 0x54A0 #define HDP_TILING_CONFIG 0x2F3C +#define MC_SHARED_CHMAP 0x2004 +#define NOOFCHAN_SHIFT 12 +#define NOOFCHAN_MASK 0x00003000 + #define MC_ARB_RAMCFG 0x2760 #define NOOFBANK_SHIFT 0 #define NOOFBANK_MASK 0x00000003 @@ -142,6 +146,7 @@ #define CHANSIZE_MASK 0x00000100 #define BURSTLENGTH_SHIFT 9 #define BURSTLENGTH_MASK 0x00000200 +#define CHANSIZE_OVERRIDE (1 << 11) #define MC_VM_AGP_TOP 0x2028 #define MC_VM_AGP_BOT 0x202C #define MC_VM_AGP_BASE 0x2030 -- cgit v1.1 From 790cfb34ad645be3bf69265cb05d824aeabcfa11 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 15 Oct 2009 23:26:09 -0400 Subject: drm/radeon/kms: add quirk for acer 5102 doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index 8298c99..fcb9371 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1579,6 +1579,17 @@ static bool radeon_apply_legacy_quirks(struct drm_device *dev, return true; } +static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) +{ + /* Acer 5102 has non-existent TV port */ + if (dev->pdev->device == 0x5975 && + dev->pdev->subsystem_vendor == 0x1025 && + dev->pdev->subsystem_device == 0x009f) + return false; + + return true; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; @@ -1896,16 +1907,18 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) combios_get_table_offset(dev, COMBIOS_TV_INFO_TABLE); if (tv_info) { if (RBIOS8(tv_info + 6) == 'T') { - radeon_add_legacy_encoder(dev, - radeon_get_encoder_id - (dev, - ATOM_DEVICE_TV1_SUPPORT, - 2), - ATOM_DEVICE_TV1_SUPPORT); - radeon_add_legacy_connector(dev, 6, - ATOM_DEVICE_TV1_SUPPORT, - DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + if (radeon_apply_legacy_tv_quirks(dev)) { + radeon_add_legacy_encoder(dev, + radeon_get_encoder_id + (dev, + ATOM_DEVICE_TV1_SUPPORT, + 2), + ATOM_DEVICE_TV1_SUPPORT); + radeon_add_legacy_connector(dev, 6, + ATOM_DEVICE_TV1_SUPPORT, + DRM_MODE_CONNECTOR_SVIDEO, + &ddc_i2c); + } } } } -- cgit v1.1 From bc293e58cb4095f2ad43fe672ae269e31d1a18e2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Mon, 19 Oct 2009 17:49:49 -0400 Subject: drm/radeon/kms/atom: get better min pixel clock info Where supported use ulMinPixelClockPLL_Output rather than usMinPixelClockPLL_Output for pll_out_min. This seems to improve pll selection on some boards. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 79d4b77..cec6791 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -641,8 +641,12 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) le16_to_cpu(firmware_info->info.usReferenceClock); p1pll->reference_div = 0; - p1pll->pll_out_min = - le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + if (crev < 2) + p1pll->pll_out_min = + le16_to_cpu(firmware_info->info.usMinPixelClockPLL_Output); + else + p1pll->pll_out_min = + le32_to_cpu(firmware_info->info_12.ulMinPixelClockPLL_Output); p1pll->pll_out_max = le32_to_cpu(firmware_info->info.ulMaxPixelClockPLL_Output); -- cgit v1.1 From c54b1820d69a1043acaf50d084852e628266e0e2 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 08:11:36 -0500 Subject: drm/radeon/r600: Replace repeated calculations with variable. - Reduce the chance of error and avoid a bit of overhead. - Use switch to assign color and format Signed-off-by: Robert Noland Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 52 +++++++++++++++++++++++--------------- 1 file changed, 31 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index d988eec..626a9ab 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -774,6 +774,7 @@ r600_blit_swap(struct drm_device *dev, { drm_radeon_private_t *dev_priv = dev->dev_private; int cb_format, tex_format; + int sx2, sy2, dx2, dy2; u64 vb_addr; u32 *vb; @@ -790,16 +791,10 @@ r600_blit_swap(struct drm_device *dev, vb = r600_nomm_get_vb_ptr(dev); } - if (cpp == 4) { - cb_format = COLOR_8_8_8_8; - tex_format = FMT_8_8_8_8; - } else if (cpp == 2) { - cb_format = COLOR_5_6_5; - tex_format = FMT_5_6_5; - } else { - cb_format = COLOR_8; - tex_format = FMT_8; - } + sx2 = sx + w; + sy2 = sy + h; + dx2 = dx + w; + dy2 = dy + h; vb[0] = i2f(dx); vb[1] = i2f(dy); @@ -807,31 +802,46 @@ r600_blit_swap(struct drm_device *dev, vb[3] = i2f(sy); vb[4] = i2f(dx); - vb[5] = i2f(dy + h); + vb[5] = i2f(dy2); vb[6] = i2f(sx); - vb[7] = i2f(sy + h); + vb[7] = i2f(sy2); - vb[8] = i2f(dx + w); - vb[9] = i2f(dy + h); - vb[10] = i2f(sx + w); - vb[11] = i2f(sy + h); + vb[8] = i2f(dx2); + vb[9] = i2f(dy2); + vb[10] = i2f(sx2); + vb[11] = i2f(sy2); + + switch(cpp) { + case 4: + cb_format = COLOR_8_8_8_8; + tex_format = FMT_8_8_8_8; + break; + case 2: + cb_format = COLOR_5_6_5; + tex_format = FMT_5_6_5; + break; + default: + cb_format = COLOR_8; + tex_format = FMT_8; + break; + } /* src */ set_tex_resource(dev_priv, tex_format, src_pitch / cpp, - sy + h, src_pitch / cpp, + sy2, src_pitch / cpp, src_gpu_addr); cp_set_surface_sync(dev_priv, - R600_TC_ACTION_ENA, (src_pitch * (sy + h)), src_gpu_addr); + R600_TC_ACTION_ENA, src_pitch * sy2, src_gpu_addr); /* dst */ set_render_target(dev_priv, cb_format, - dst_pitch / cpp, dy + h, + dst_pitch / cpp, dy2, dst_gpu_addr); /* scissors */ - set_scissors(dev_priv, dx, dy, dx + w, dy + h); + set_scissors(dev_priv, dx, dy, dx2, dy2); /* Vertex buffer setup */ vb_addr = dev_priv->gart_buffers_offset + @@ -844,7 +854,7 @@ r600_blit_swap(struct drm_device *dev, cp_set_surface_sync(dev_priv, R600_CB_ACTION_ENA | R600_CB0_DEST_BASE_ENA, - dst_pitch * (dy + h), dst_gpu_addr); + dst_pitch * dy2, dst_gpu_addr); dev_priv->blit_vb->used += 12 * 4; } -- cgit v1.1 From 33fdb15c99aac20d238af487fa363d3e5c7ed197 Mon Sep 17 00:00:00 2001 From: Robert Noland Date: Tue, 20 Oct 2009 13:07:38 -0500 Subject: drm/radeon/r600: only assign vb after we know space is available. This patch only changes this is the swap path, where it doesn't loop. Signed-off-by: Robert Noland Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_blit.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_blit.c b/drivers/gpu/drm/radeon/r600_blit.c index 626a9ab..5ea4323 100644 --- a/drivers/gpu/drm/radeon/r600_blit.c +++ b/drivers/gpu/drm/radeon/r600_blit.c @@ -778,8 +778,6 @@ r600_blit_swap(struct drm_device *dev, u64 vb_addr; u32 *vb; - vb = r600_nomm_get_vb_ptr(dev); - if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) { r600_nomm_put_vb(dev); @@ -788,8 +786,8 @@ r600_blit_swap(struct drm_device *dev, return; set_shaders(dev); - vb = r600_nomm_get_vb_ptr(dev); } + vb = r600_nomm_get_vb_ptr(dev); sx2 = sx + w; sy2 = sy + h; -- cgit v1.1 From c290dadf4cac25cc91529d84004795ab43fc0821 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 22 Oct 2009 16:12:34 -0400 Subject: drm/radeon/kms/r7xx: add regs for 40 bit CUR/GRPH addresses The *_HIGH regs are reversed. The secondary ones are in the primary block and vice versa. We currently only use a 32 bit internal address, so these are 0 for now. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 10 ++++++++++ drivers/gpu/drm/radeon/r500_reg.h | 9 +++++++++ drivers/gpu/drm/radeon/radeon_cursor.c | 10 ++++++++-- 3 files changed, 27 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index f7dcb69..9c26e53 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -577,6 +577,16 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y, WREG32(AVIVO_D1VGA_CONTROL, 0); else WREG32(AVIVO_D2VGA_CONTROL, 0); + + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) { + WREG32(R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } else { + WREG32(R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH, 0); + WREG32(R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH, 0); + } + } WREG32(AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS + radeon_crtc->crtc_offset, (u32) fb_location); WREG32(AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS + diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h index 868add6..7baa739 100644 --- a/drivers/gpu/drm/radeon/r500_reg.h +++ b/drivers/gpu/drm/radeon/r500_reg.h @@ -384,9 +384,16 @@ # define AVIVO_D1GRPH_TILED (1 << 20) # define AVIVO_D1GRPH_MACRO_ADDRESS_MODE (1 << 21) +/* The R7xx *_HIGH surface regs are backwards; the D1 regs are in the D2 + * block and vice versa. This applies to GRPH, CUR, etc. + */ #define AVIVO_D1GRPH_LUT_SEL 0x6108 #define AVIVO_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x6110 +#define R700_D1GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6914 +#define R700_D2GRPH_PRIMARY_SURFACE_ADDRESS_HIGH 0x6114 #define AVIVO_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x6118 +#define R700_D1GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x691c +#define R700_D2GRPH_SECONDARY_SURFACE_ADDRESS_HIGH 0x611c #define AVIVO_D1GRPH_PITCH 0x6120 #define AVIVO_D1GRPH_SURFACE_OFFSET_X 0x6124 #define AVIVO_D1GRPH_SURFACE_OFFSET_Y 0x6128 @@ -404,6 +411,8 @@ # define AVIVO_D1CURSOR_MODE_MASK (3 << 8) # define AVIVO_D1CURSOR_MODE_24BPP 2 #define AVIVO_D1CUR_SURFACE_ADDRESS 0x6408 +#define R700_D1CUR_SURFACE_ADDRESS_HIGH 0x6c0c +#define R700_D2CUR_SURFACE_ADDRESS_HIGH 0x640c #define AVIVO_D1CUR_SIZE 0x6410 #define AVIVO_D1CUR_POSITION 0x6414 #define AVIVO_D1CUR_HOT_SPOT 0x6418 diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c index b13c79e..28772a3 100644 --- a/drivers/gpu/drm/radeon/radeon_cursor.c +++ b/drivers/gpu/drm/radeon/radeon_cursor.c @@ -109,9 +109,15 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj, struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct radeon_device *rdev = crtc->dev->dev_private; - if (ASIC_IS_AVIVO(rdev)) + if (ASIC_IS_AVIVO(rdev)) { + if (rdev->family >= CHIP_RV770) { + if (radeon_crtc->crtc_id) + WREG32(R700_D2CUR_SURFACE_ADDRESS_HIGH, 0); + else + WREG32(R700_D1CUR_SURFACE_ADDRESS_HIGH, 0); + } WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr); - else { + } else { radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr; /* offset is from DISP(2)_BASE_ADDRESS */ WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset); -- cgit v1.1 From ebbe1cb936dfc96d809ccf4d64a9755f8ba0c0ff Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 11:15:25 -0400 Subject: drm/radeon/kms/atom: add support for spread spectrum (v2) Spread spectrum is a periodic disturbance added to the feedback divider to change the pixel clock periodically to reduce interference. Only enabled on LVDS. v2: add support for r4xx and fix DCE 3 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios.h | 2 +- drivers/gpu/drm/radeon/atombios_crtc.c | 68 ++++++++++++++++++++++++++------ drivers/gpu/drm/radeon/radeon_atombios.c | 42 ++++++++++++++++++++ drivers/gpu/drm/radeon/radeon_mode.h | 11 ++++++ 4 files changed, 111 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 5d40208..c11dddd 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -2314,7 +2314,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_ASSIGNMENT { UCHAR ucSS_Step; UCHAR ucSS_Delay; UCHAR ucSS_Id; - UCHAR ucRecommandedRef_Div; + UCHAR ucRecommendedRef_Div; UCHAR ucSS_Range; /* it was reserved for V11 */ } ATOM_SPREAD_SPECTRUM_ASSIGNMENT; diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 9c26e53..e5a3c30 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -351,6 +351,61 @@ static void atombios_crtc_set_timing(struct drm_crtc *crtc, atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +static void atombios_set_ss(struct drm_crtc *crtc, int enable) +{ + struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); + struct drm_device *dev = crtc->dev; + struct radeon_device *rdev = dev->dev_private; + struct drm_encoder *encoder = NULL; + struct radeon_encoder *radeon_encoder = NULL; + struct radeon_encoder_atom_dig *dig = NULL; + int index = GetIndexIntoMasterTable(COMMAND, EnableSpreadSpectrumOnPPLL); + ENABLE_SPREAD_SPECTRUM_ON_PPLL_PS_ALLOCATION args; + ENABLE_LVDS_SS_PARAMETERS legacy_args; + uint16_t percentage = 0; + uint8_t type = 0, step = 0, delay = 0, range = 0; + + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { + if (encoder->crtc == crtc) { + radeon_encoder = to_radeon_encoder(encoder); + dig = radeon_encoder->enc_priv; + /* only enable spread spectrum on LVDS */ + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; + break; + } + } + + if (!radeon_encoder) + return; + + if (ASIC_IS_AVIVO(rdev)) { + memset(&args, 0, sizeof(args)); + args.usSpreadSpectrumPercentage = percentage; + args.ucSpreadSpectrumType = type; + args.ucSpreadSpectrumStep = step; + args.ucSpreadSpectrumDelay = delay; + args.ucSpreadSpectrumRange = range; + args.ucPpll = radeon_crtc->crtc_id ? ATOM_PPLL2 : ATOM_PPLL1; + args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + } else { + memset(&legacy_args, 0, sizeof(legacy_args)); + legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.ucSpreadSpectrumType = type; + legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; + legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; + legacy_args.ucEnable = enable; + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&legacy_args); + } +} + void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); @@ -373,8 +428,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) memset(&args, 0, sizeof(args)); if (ASIC_IS_AVIVO(rdev)) { - uint32_t ss_cntl; - if ((rdev->family == CHIP_RS600) || (rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740)) @@ -385,15 +438,6 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV; else pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV; - - /* disable spread spectrum clocking for now -- thanks Hedy Lamarr */ - if (radeon_crtc->crtc_id == 0) { - ss_cntl = RREG32(AVIVO_P1PLL_INT_SS_CNTL); - WREG32(AVIVO_P1PLL_INT_SS_CNTL, ss_cntl & ~1); - } else { - ss_cntl = RREG32(AVIVO_P2PLL_INT_SS_CNTL); - WREG32(AVIVO_P2PLL_INT_SS_CNTL, ss_cntl & ~1); - } } else { pll_flags |= RADEON_PLL_LEGACY; @@ -641,7 +685,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc, /* TODO color tiling */ + atombios_set_ss(crtc, 0); atombios_crtc_set_pll(crtc, adjusted_mode); + atombios_set_ss(crtc, 1); atombios_crtc_set_timing(crtc, adjusted_mode); if (ASIC_IS_AVIVO(rdev)) diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index cec6791..1872925 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -771,6 +771,46 @@ bool radeon_atombios_get_tmds_info(struct radeon_encoder *encoder, return false; } +static struct radeon_atom_ss *radeon_atombios_get_ss_info(struct + radeon_encoder + *encoder, + int id) +{ + struct drm_device *dev = encoder->base.dev; + struct radeon_device *rdev = dev->dev_private; + struct radeon_mode_info *mode_info = &rdev->mode_info; + int index = GetIndexIntoMasterTable(DATA, PPLL_SS_Info); + uint16_t data_offset; + struct _ATOM_SPREAD_SPECTRUM_INFO *ss_info; + uint8_t frev, crev; + struct radeon_atom_ss *ss = NULL; + + if (id > ATOM_MAX_SS_ENTRY) + return NULL; + + atom_parse_data_header(mode_info->atom_context, index, NULL, &frev, + &crev, &data_offset); + + ss_info = + (struct _ATOM_SPREAD_SPECTRUM_INFO *)(mode_info->atom_context->bios + data_offset); + + if (ss_info) { + ss = + kzalloc(sizeof(struct radeon_atom_ss), GFP_KERNEL); + + if (!ss) + return NULL; + + ss->percentage = le16_to_cpu(ss_info->asSS_Info[id].usSpreadSpectrumPercentage); + ss->type = ss_info->asSS_Info[id].ucSpreadSpectrumType; + ss->step = ss_info->asSS_Info[id].ucSS_Step; + ss->delay = ss_info->asSS_Info[id].ucSS_Delay; + ss->range = ss_info->asSS_Info[id].ucSS_Range; + ss->refdiv = ss_info->asSS_Info[id].ucRecommendedRef_Div; + } + return ss; +} + union lvds_info { struct _ATOM_LVDS_INFO info; struct _ATOM_LVDS_INFO_V12 info_12; @@ -826,6 +866,8 @@ struct radeon_encoder_atom_dig *radeon_atombios_get_lvds_info(struct /* set crtc values */ drm_mode_set_crtcinfo(&lvds->native_mode, CRTC_INTERLACE_HALVE_V); + lvds->ss = radeon_atombios_get_ss_info(encoder, lvds_info->info.ucSS_Id); + encoder->native_mode = lvds->native_mode; } return lvds; diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index b6868fb..2ea5707 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -260,6 +260,16 @@ struct radeon_encoder_int_tmds { struct radeon_tmds_pll tmds_pll[4]; }; +/* spread spectrum */ +struct radeon_atom_ss { + uint16_t percentage; + uint8_t type; + uint8_t step; + uint8_t delay; + uint8_t range; + uint8_t refdiv; +}; + struct radeon_encoder_atom_dig { /* atom dig */ bool coherent_mode; @@ -267,6 +277,7 @@ struct radeon_encoder_atom_dig { /* atom lvds */ uint32_t lvds_misc; uint16_t panel_pwr_delay; + struct radeon_atom_ss *ss; /* panel mode */ struct drm_display_mode native_mode; }; -- cgit v1.1 From 3e5cb98dfe87cc61d0a1119dd8aa2b1e4cfab424 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 16 Oct 2009 12:21:24 -0400 Subject: drm/radeon/kms: add support for msi Try to enable msi on chips that support it. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 17 ++++++++++++++++- drivers/gpu/drm/radeon/radeon.h | 1 + drivers/gpu/drm/radeon/radeon_irq_kms.c | 9 +++++++++ drivers/gpu/drm/radeon/radeon_reg.h | 6 ++++++ drivers/gpu/drm/radeon/rs600.c | 18 +++++++++++++++++- 5 files changed, 49 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index ed5e983..b438b52 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -186,7 +186,7 @@ static inline uint32_t r100_irq_ack(struct radeon_device *rdev) int r100_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; status = r100_irq_ack(rdev); if (!status) { @@ -209,6 +209,21 @@ int r100_irq_process(struct radeon_device *rdev) } status = r100_irq_ack(rdev); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS400: + case CHIP_RS480: + msi_rearm = RREG32(RADEON_AIC_CNTL) & ~RS400_MSI_REARM; + WREG32(RADEON_AIC_CNTL, msi_rearm); + WREG32(RADEON_AIC_CNTL, msi_rearm | RS400_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 8b60e36..ea3efd7 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -784,6 +784,7 @@ struct radeon_device { const struct firmware *me_fw; /* all family ME firmware */ const struct firmware *pfp_fw; /* r6/700 PFP firmware */ struct r600_blit r600_blit; + int msi_enabled; /* msi enabled */ }; int radeon_device_init(struct radeon_device *rdev, diff --git a/drivers/gpu/drm/radeon/radeon_irq_kms.c b/drivers/gpu/drm/radeon/radeon_irq_kms.c index 8e0a875..a0fe623 100644 --- a/drivers/gpu/drm/radeon/radeon_irq_kms.c +++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c @@ -92,6 +92,13 @@ int radeon_irq_kms_init(struct radeon_device *rdev) if (r) { return r; } + /* enable msi */ + rdev->msi_enabled = 0; + if (rdev->family >= CHIP_RV380) { + int ret = pci_enable_msi(rdev->pdev); + if (!ret) + rdev->msi_enabled = 1; + } drm_irq_install(rdev->ddev); rdev->irq.installed = true; DRM_INFO("radeon: irq initialized.\n"); @@ -103,5 +110,7 @@ void radeon_irq_kms_fini(struct radeon_device *rdev) if (rdev->irq.installed) { rdev->irq.installed = false; drm_irq_uninstall(rdev->ddev); + if (rdev->msi_enabled) + pci_disable_msi(rdev->pdev); } } diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h index bfa1ab9..29ab759 100644 --- a/drivers/gpu/drm/radeon/radeon_reg.h +++ b/drivers/gpu/drm/radeon/radeon_reg.h @@ -290,6 +290,8 @@ #define RADEON_BUS_CNTL 0x0030 # define RADEON_BUS_MASTER_DIS (1 << 6) # define RADEON_BUS_BIOS_DIS_ROM (1 << 12) +# define RS600_BUS_MASTER_DIS (1 << 14) +# define RS600_MSI_REARM (1 << 20) /* rs600/rs690/rs740 */ # define RADEON_BUS_RD_DISCARD_EN (1 << 24) # define RADEON_BUS_RD_ABORT_EN (1 << 25) # define RADEON_BUS_MSTR_DISCONNECT_EN (1 << 28) @@ -297,6 +299,9 @@ # define RADEON_BUS_READ_BURST (1 << 30) #define RADEON_BUS_CNTL1 0x0034 # define RADEON_BUS_WAIT_ON_LOCK_EN (1 << 4) +/* rv370/rv380, rv410, r423/r430/r480, r5xx */ +#define RADEON_MSI_REARM_EN 0x0160 +# define RV370_MSI_REARM_EN (1 << 0) /* #define RADEON_PCIE_INDEX 0x0030 */ /* #define RADEON_PCIE_DATA 0x0034 */ @@ -3311,6 +3316,7 @@ #define RADEON_AIC_CNTL 0x01d0 # define RADEON_PCIGART_TRANSLATE_EN (1 << 0) # define RADEON_DIS_OUT_OF_PCI_GART_ACCESS (1 << 1) +# define RS400_MSI_REARM (1 << 3) /* rs400/rs480 */ #define RADEON_AIC_LO_ADDR 0x01dc #define RADEON_AIC_PT_BASE 0x01d8 #define RADEON_AIC_HI_ADDR 0x01e0 diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 10dfa78..942754c 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -242,7 +242,7 @@ void rs600_irq_disable(struct radeon_device *rdev) int rs600_irq_process(struct radeon_device *rdev) { - uint32_t status; + uint32_t status, msi_rearm; uint32_t r500_disp_int; status = rs600_irq_ack(rdev, &r500_disp_int); @@ -260,6 +260,22 @@ int rs600_irq_process(struct radeon_device *rdev) drm_handle_vblank(rdev->ddev, 1); status = rs600_irq_ack(rdev, &r500_disp_int); } + if (rdev->msi_enabled) { + switch (rdev->family) { + case CHIP_RS600: + case CHIP_RS690: + case CHIP_RS740: + msi_rearm = RREG32(RADEON_BUS_CNTL) & ~RS600_MSI_REARM; + WREG32(RADEON_BUS_CNTL, msi_rearm); + WREG32(RADEON_BUS_CNTL, msi_rearm | RS600_MSI_REARM); + break; + default: + msi_rearm = RREG32(RADEON_MSI_REARM_EN) & ~RV370_MSI_REARM_EN; + WREG32(RADEON_MSI_REARM_EN, msi_rearm); + WREG32(RADEON_MSI_REARM_EN, msi_rearm | RV370_MSI_REARM_EN); + break; + } + } return IRQ_HANDLED; } -- cgit v1.1 From 8f552a66a40bcc6e903e91310f42fe140e0342c4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 11:16:09 -0400 Subject: drm/radeon/kms/atom: loosen pll min output limits Limiting the pll output range is a good thing generally as it limits the number of possible pll combinations for a given frequency presumably to the ones that work best on each card. That's why the limits are in the bios tables. However, certain duallink DVI monitors seem to like pll combinations that would be limited by this at least on pre-DCE 3.0 r6xx hardware. This might need to be adjusted per family or per clock range in the future. See fdo bug 24727. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1872925..1c9a9c4 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -655,6 +655,16 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; + } else if (p1pll->pll_out_min > 64800) { + /* Limiting the pll output range is a good thing generally as + * it limits the number of possible pll combinations for a given + * frequency presumably to the ones that work best on each card. + * However, certain duallink DVI monitors seem to like + * pll combinations that would be limited by this at least on + * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per + * family. + */ + p1pll->pll_out_min = 64800; } p1pll->pll_in_min = -- cgit v1.1 From d56ef9c8fd34ed29ffae27598a864b4a9a82521b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 27 Oct 2009 12:11:09 -0400 Subject: drm/radeon/kms/atom: Fix DVO support DVO in 12 bit mode (which seems to be the most common config) requires 2x ppll. Fixes fdo bug 21857. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e5a3c30..8516e1b 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -483,8 +483,14 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&adjust_pll_args); adjusted_clock = le16_to_cpu(adjust_pll_args.usPixelClock) * 10; - } else - adjusted_clock = mode->clock; + } else { + /* DVO wants 2x pixel clock if the DVO chip is in 12 bit mode */ + if (ASIC_IS_AVIVO(rdev) && + (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_KLDSCP_DVO1)) + adjusted_clock = mode->clock * 2; + else + adjusted_clock = mode->clock; + } if (radeon_crtc->crtc_id == 0) pll = &rdev->clock.p1pll; -- cgit v1.1 From 61c4b24b3e3bb83bfe29f24fe566281b4f722237 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mathias=20Fr=C3=B6hlich?= Date: Tue, 27 Oct 2009 15:08:01 -0400 Subject: drm/radeon/kms/atom: Make card_info per device Make the struct card_info, which is a per struct radeon_device dataset, a struct member of the radeon device instead of a static per kernel module value. This should avoid potential problems with two radeon cards installed in one system. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_device.c | 29 +++++++++++++++++------------ drivers/gpu/drm/radeon/radeon_mode.h | 1 + 2 files changed, 18 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index d1cdda9..88c1907 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -443,20 +443,24 @@ static uint32_t cail_reg_read(struct card_info *info, uint32_t reg) return r; } -static struct card_info atom_card_info = { - .dev = NULL, - .reg_read = cail_reg_read, - .reg_write = cail_reg_write, - .mc_read = cail_mc_read, - .mc_write = cail_mc_write, - .pll_read = cail_pll_read, - .pll_write = cail_pll_write, -}; - int radeon_atombios_init(struct radeon_device *rdev) { - atom_card_info.dev = rdev->ddev; - rdev->mode_info.atom_context = atom_parse(&atom_card_info, rdev->bios); + struct card_info *atom_card_info = + kzalloc(sizeof(struct card_info), GFP_KERNEL); + + if (!atom_card_info) + return -ENOMEM; + + rdev->mode_info.atom_card_info = atom_card_info; + atom_card_info->dev = rdev->ddev; + atom_card_info->reg_read = cail_reg_read; + atom_card_info->reg_write = cail_reg_write; + atom_card_info->mc_read = cail_mc_read; + atom_card_info->mc_write = cail_mc_write; + atom_card_info->pll_read = cail_pll_read; + atom_card_info->pll_write = cail_pll_write; + + rdev->mode_info.atom_context = atom_parse(atom_card_info, rdev->bios); radeon_atom_initialize_bios_scratch_regs(rdev->ddev); return 0; } @@ -464,6 +468,7 @@ int radeon_atombios_init(struct radeon_device *rdev) void radeon_atombios_fini(struct radeon_device *rdev) { kfree(rdev->mode_info.atom_context); + kfree(rdev->mode_info.atom_card_info); } int radeon_combios_init(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index 2ea5707..ccb7838 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -172,6 +172,7 @@ enum radeon_connector_table { struct radeon_mode_info { struct atom_context *atom_context; + struct card_info *atom_card_info; enum radeon_connector_table connector_table; bool mode_config_initialized; struct radeon_crtc *crtcs[2]; -- cgit v1.1 From a2d49ae7df5b96fba3c63710df61412587fc6a24 Mon Sep 17 00:00:00 2001 From: James Simmons Date: Tue, 27 Oct 2009 21:09:24 +0000 Subject: drm/kms: typo fix I believe this is a typo. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 9c92461..dc8e374 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -707,7 +707,7 @@ int drm_fb_helper_set_par(struct fb_info *info) if (crtc->fb == fb_helper->crtc_info[i].mode_set.fb) { mutex_lock(&dev->mode_config.mutex); - ret = crtc->funcs->set_config(&fb_helper->crtc_info->mode_set); + ret = crtc->funcs->set_config(&fb_helper->crtc_info[i].mode_set); mutex_unlock(&dev->mode_config.mutex); if (ret) return ret; -- cgit v1.1 From d11aa88b33b071d55181a7a482b9e7494888c10e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 00:51:20 -0400 Subject: drm/radeon/kms/atom: fix potential oops in spread spectrum code Make sure we have an LVDS encoder before casting enc_priv. [airlied: also fix two missing cpu_to_le16 casts we noticed on irc] Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 8516e1b..c15287a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -368,14 +368,17 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { if (encoder->crtc == crtc) { radeon_encoder = to_radeon_encoder(encoder); - dig = radeon_encoder->enc_priv; /* only enable spread spectrum on LVDS */ - if (dig && dig->ss) { - percentage = dig->ss->percentage; - type = dig->ss->type; - step = dig->ss->step; - delay = dig->ss->delay; - range = dig->ss->range; + if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { + dig = radeon_encoder->enc_priv; + if (dig && dig->ss) { + percentage = dig->ss->percentage; + type = dig->ss->type; + step = dig->ss->step; + delay = dig->ss->delay; + range = dig->ss->range; + } else if (enable) + return; } else if (enable) return; break; @@ -387,7 +390,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) if (ASIC_IS_AVIVO(rdev)) { memset(&args, 0, sizeof(args)); - args.usSpreadSpectrumPercentage = percentage; + args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); args.ucSpreadSpectrumType = type; args.ucSpreadSpectrumStep = step; args.ucSpreadSpectrumDelay = delay; @@ -397,7 +400,7 @@ static void atombios_set_ss(struct drm_crtc *crtc, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } else { memset(&legacy_args, 0, sizeof(legacy_args)); - legacy_args.usSpreadSpectrumPercentage = percentage; + legacy_args.usSpreadSpectrumPercentage = cpu_to_le16(percentage); legacy_args.ucSpreadSpectrumType = type; legacy_args.ucSpreadSpectrumStepSize_Delay = (step & 3) << 2; legacy_args.ucSpreadSpectrumStepSize_Delay |= (delay & 7) << 4; -- cgit v1.1 From fc7f7119d2ed97fff1aaddad6bf7d61ed446cf37 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 Oct 2009 01:46:54 -0400 Subject: drm/radeon/kms: add quirk for hp dc5750 Doesn't have a tv-out port Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_combios.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index fcb9371..a36ede0 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -1587,6 +1587,12 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) dev->pdev->subsystem_device == 0x009f) return false; + /* HP dc5750 has non-existent TV port */ + if (dev->pdev->device == 0x5974 && + dev->pdev->subsystem_vendor == 0x103c && + dev->pdev->subsystem_device == 0x280a) + return false; + return true; } -- cgit v1.1 From ea1495a6274c9542a168337536f8ce74d1173f23 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 27 Oct 2009 11:57:53 +1100 Subject: drm/radeon/kms: fix rc410 suspend/resume. This fixes suspend/resume on my rc410 motherboard, it restores the memory controller setup before posting the GPU, since it seems to need the MC_FB_LOCATION setup correctly. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rs400.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c index a769c29..ca03716 100644 --- a/drivers/gpu/drm/radeon/rs400.c +++ b/drivers/gpu/drm/radeon/rs400.c @@ -418,6 +418,8 @@ int rs400_resume(struct radeon_device *rdev) rs400_gart_disable(rdev); /* Resume clock before doing reset */ r300_clock_startup(rdev); + /* setup MC before calling post tables */ + rs400_mc_program(rdev); /* Reset gpu before posting otherwise ATOM will enter infinite loop */ if (radeon_gpu_reset(rdev)) { dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n", -- cgit v1.1 From 52a2b11cafb1b14bacfc65a20966da5ba3a863e1 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 1 Oct 2009 15:48:40 -0700 Subject: ACPI: clean up video.c boundary checks and types proc.c and video.c are a bit sloppy around types and style, confusing gcc for a new feature that'll be in 2.6.33 and will cause a warning on the current code. This patch changes if (foo + 1 > sizeof bar) into if (foo >= sizeof(bar)) which is more kernel-style. it also changes a variable in proc.c to unsigned; it gets assigned a value from an unsigned type, and is then only compared for > not for negative, so using unsigned is just outright the right type Signed-off-by: Arjan van de Ven Signed-off-by: Len Brown --- drivers/acpi/proc.c | 2 +- drivers/acpi/video.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index f8b6f55..d0d25e2 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file, struct list_head *node, *next; char strbuf[5]; char str[5] = ""; - int len = count; + unsigned int len = count; struct acpi_device *found_dev = NULL; if (len > 4) diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 64e3c58..05dff63 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1223,7 +1223,7 @@ acpi_video_device_write_state(struct file *file, u32 state = 0; - if (!dev || count + 1 > sizeof str) + if (!dev || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1280,7 +1280,7 @@ acpi_video_device_write_brightness(struct file *file, int i; - if (!dev || !dev->brightness || count + 1 > sizeof str) + if (!dev || !dev->brightness || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) @@ -1562,7 +1562,7 @@ acpi_video_bus_write_POST(struct file *file, unsigned long long opt, options; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; status = acpi_video_bus_POST_options(video, &options); @@ -1602,7 +1602,7 @@ acpi_video_bus_write_DOS(struct file *file, unsigned long opt; - if (!video || count + 1 > sizeof str) + if (!video || count >= sizeof(str)) return -EINVAL; if (copy_from_user(str, buffer, count)) -- cgit v1.1 From 58ce48a9de1dd47acb5dc00e2837214d2be1d92a Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Fri, 16 Oct 2009 22:22:46 +0200 Subject: Revert "eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit rt2860sta is fine with the patch as is, but iwl3945 isn't (eeepc_rfkill_set() needs to call eeepc_rfkill_hotplug(true) – which means that we're back to causing the rt2860sta panic This reverts commit b56ab33d68638e6aafdbfc694025e8354a628f49. Signed-off-by: Corentin Chary Signed-off-by: Darren Salt Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 27 ++++++++------------------- 1 file changed, 8 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index d379e74..789d6ae 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -150,8 +150,6 @@ struct eeepc_hotk { /* The actual device the driver binds to */ static struct eeepc_hotk *ehotk; -static void eeepc_rfkill_hotplug(bool real); - /* Platform device/driver */ static int eeepc_hotk_thaw(struct device *device); static int eeepc_hotk_restore(struct device *device); @@ -345,16 +343,7 @@ static bool eeepc_wlan_rfkill_blocked(void) static int eeepc_rfkill_set(void *data, bool blocked) { unsigned long asl = (unsigned long)data; - int ret; - - if (asl != CM_ASL_WLAN) - return set_acpi(asl, !blocked); - - /* hack to avoid panic with rt2860sta */ - if (blocked) - eeepc_rfkill_hotplug(false); - ret = set_acpi(asl, !blocked); - return ret; + return set_acpi(asl, !blocked); } static const struct rfkill_ops eeepc_rfkill_ops = { @@ -654,13 +643,13 @@ static int eeepc_get_adapter_status(struct hotplug_slot *hotplug_slot, return 0; } -static void eeepc_rfkill_hotplug(bool real) +static void eeepc_rfkill_hotplug(void) { struct pci_dev *dev; struct pci_bus *bus; - bool blocked = real ? eeepc_wlan_rfkill_blocked() : true; + bool blocked = eeepc_wlan_rfkill_blocked(); - if (real && ehotk->wlan_rfkill) + if (ehotk->wlan_rfkill) rfkill_set_sw_state(ehotk->wlan_rfkill, blocked); mutex_lock(&ehotk->hotplug_lock); @@ -703,7 +692,7 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data) if (event != ACPI_NOTIFY_BUS_CHECK) return; - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); } static void eeepc_hotk_notify(struct acpi_device *device, u32 event) @@ -861,7 +850,7 @@ static int eeepc_hotk_restore(struct device *device) { /* Refresh both wlan rfkill state and pci hotplug */ if (ehotk->wlan_rfkill) - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->bluetooth_rfkill) rfkill_set_sw_state(ehotk->bluetooth_rfkill, @@ -1004,7 +993,7 @@ static void eeepc_rfkill_exit(void) * Refresh pci hotplug in case the rfkill state was changed after * eeepc_unregister_rfkill_notifier() */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); if (ehotk->hotplug_slot) pci_hp_deregister(ehotk->hotplug_slot); @@ -1120,7 +1109,7 @@ static int eeepc_rfkill_init(struct device *dev) * Refresh pci hotplug in case the rfkill state was changed during * setup. */ - eeepc_rfkill_hotplug(true); + eeepc_rfkill_hotplug(); exit: if (result && result != -ENODEV) -- cgit v1.1 From 80f0c895b57f0d936b420de6afea5167a49f62fa Mon Sep 17 00:00:00 2001 From: Luca Niccoli Date: Fri, 16 Oct 2009 22:22:47 +0200 Subject: eeepc-laptop: don't enable camera at startup if it's already on. Switching the camera takes 500ms, checking if it's on is almost free... The BIOS remembers the setting through reboots, so there's good chance the camera is already enabled. Signed-off-by: Luca Niccoli Cc: Corentin Chary Cc: Alan Jenkins Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Corentin Chary Signed-off-by: Len Brown --- drivers/platform/x86/eeepc-laptop.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 789d6ae..4226e53 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -356,7 +356,8 @@ static void __devinit eeepc_enable_camera(void) * If the following call to set_acpi() fails, it's because there's no * camera so we can ignore the error. */ - set_acpi(CM_ASL_CAMERA, 1); + if (get_acpi(CM_ASL_CAMERA) == 0) + set_acpi(CM_ASL_CAMERA, 1); } /* -- cgit v1.1 From df67bed92fa86ef926da8b62a6da68722388ff72 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 30 Oct 2009 13:31:26 +1000 Subject: drm/radeon/kms: fix coherency issues on AGP cards. When we are evicting from VRAM->RAM we allocate the ttm object, but we don't set the caching policy on it before blitting into it. This means on AGP we end up blitting into cached pages, and the CPU later flushes out on top of them. This was mostly seen as font corruption. The other question is why we don't evict VRAM->GTT in a lot of cases, this would save us some cache transitions since a lot of objects that are evicted from VRAM will probably end up being pulled back in a few operations later, and evicting them to system memory involves 2 unnecessary cache transitions. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_ttm.c | 6 ++++++ drivers/gpu/drm/ttm/ttm_tt.c | 1 + 2 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index c729cd1..f489c0d 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -295,6 +295,12 @@ static int radeon_move_vram_ram(struct ttm_buffer_object *bo, if (unlikely(r)) { return r; } + + r = ttm_tt_set_placement_caching(bo->ttm, tmp_mem.placement); + if (unlikely(r)) { + goto out_cleanup; + } + r = ttm_tt_bind(bo->ttm, &tmp_mem); if (unlikely(r)) { goto out_cleanup; diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c index a55ee1a..7bcb89f 100644 --- a/drivers/gpu/drm/ttm/ttm_tt.c +++ b/drivers/gpu/drm/ttm/ttm_tt.c @@ -279,6 +279,7 @@ int ttm_tt_set_placement_caching(struct ttm_tt *ttm, uint32_t placement) return ttm_tt_set_caching(ttm, state); } +EXPORT_SYMBOL(ttm_tt_set_placement_caching); static void ttm_tt_free_alloced_pages(struct ttm_tt *ttm) { -- cgit v1.1 From d6f28938d9426d12eea1578949f1d73d24ad37ec Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 2 Nov 2009 16:01:27 -0500 Subject: drm/radeon/kms: Don't RMW CP_RB_CNTL Immediate readback seems faulty on some chips. I suspect it takes a while to get through the fifo to the actual register backbone. There's no need to read it back, so, just write the driver's copy of the register's value directly. Should fix bug 24535 and possibly 24218 Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r100.c | 12 ++++++------ drivers/gpu/drm/radeon/r600.c | 8 +++----- 2 files changed, 9 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index b438b52..5e821a3 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -578,19 +578,19 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) indirect1_start = 16; /* cp setup */ WREG32(0x718, pre_write_timer | (pre_write_limit << 28)); - WREG32(RADEON_CP_RB_CNTL, -#ifdef __BIG_ENDIAN - RADEON_BUF_SWAP_32BIT | -#endif - REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | + tmp = (REG_SET(RADEON_RB_BUFSZ, rb_bufsz) | REG_SET(RADEON_RB_BLKSZ, rb_blksz) | REG_SET(RADEON_MAX_FETCH, max_fetch) | RADEON_RB_NO_UPDATE); +#ifdef __BIG_ENDIAN + tmp |= RADEON_BUF_SWAP_32BIT; +#endif + WREG32(RADEON_CP_RB_CNTL, tmp); + /* Set ring address */ DRM_INFO("radeon: ring at 0x%016lX\n", (unsigned long)rdev->cp.gpu_addr); WREG32(RADEON_CP_RB_BASE, rdev->cp.gpu_addr); /* Force read & write ptr to 0 */ - tmp = RREG32(RADEON_CP_RB_CNTL); WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA); WREG32(RADEON_CP_RB_RPTR_WR, 0); WREG32(RADEON_CP_RB_WPTR, 0); diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index e87475c..60fbb23 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1272,19 +1272,17 @@ int r600_cp_resume(struct radeon_device *rdev) /* Set ring buffer size */ rb_bufsz = drm_order(rdev->cp.ring_size / 8); + tmp = RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz; #ifdef __BIG_ENDIAN - WREG32(CP_RB_CNTL, BUF_SWAP_32BIT | RB_NO_UPDATE | - (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); -#else - WREG32(CP_RB_CNTL, RB_NO_UPDATE | (drm_order(RADEON_GPU_PAGE_SIZE/8) << 8) | rb_bufsz); + tmp |= BUF_SWAP_32BIT; #endif + WREG32(CP_RB_CNTL, tmp); WREG32(CP_SEM_WAIT_TIMER, 0x4); /* Set the write pointer delay */ WREG32(CP_RB_WPTR_DELAY, 0); /* Initialize the ring buffer's read and write pointers */ - tmp = RREG32(CP_RB_CNTL); WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); WREG32(CP_RB_WPTR, 0); -- cgit v1.1 From 8a9832e89ff1bc7a039c8f966f07101570be3d5e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 13:23:15 +1000 Subject: drm/radeon/kms: disable D1VGA and D2VGA if enabled Once kms is enabled we don't need these, and it causes a problem with the Lenovo W500 ACPI brightness implementation, it hangs in a loop inside an SMI. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv515.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 41a34c2..03c052d 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -137,6 +137,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev) void rv515_vga_render_disable(struct radeon_device *rdev) { + WREG32(R_000330_D1VGA_CONTROL, 0); + WREG32(R_000338_D2VGA_CONTROL, 0); WREG32(R_000300_VGA_RENDER_CONTROL, RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL); } -- cgit v1.1 From 4d357abb895ec51f1cbdebb1fbbf4d4576900a2e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 3 Nov 2009 14:54:36 +1000 Subject: drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s. The Lenovo W500 laptop hangs inside an SMI on brightness changes, I thought it just needed the VGA disable but it turned out to require slightly more work, setting the MC locations up just like the IGP chip requirements seems to make it all happy again and I can boot and play with brightness. We should probably just do this for all chips and give up the VRAM at 0x0 idea, it never seems to buy us anything but pain. Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 44 +++++++++++++++++++------------------------ 1 file changed, 19 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 60fbb23..3e5703f 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -409,35 +409,29 @@ int r600_mc_init(struct radeon_device *rdev) rdev->mc.gtt_location = rdev->mc.mc_vram_size; } } else { - if (rdev->family == CHIP_RS780 || rdev->family == CHIP_RS880) { - rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & - 0xFFFF) << 24; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; - tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; - if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { - /* Enough place after vram */ - rdev->mc.gtt_location = tmp; - } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { - /* Enough place before vram */ + rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; + rdev->mc.vram_location = (RREG32(MC_VM_FB_LOCATION) & + 0xFFFF) << 24; + tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size; + if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) { + /* Enough place after vram */ + rdev->mc.gtt_location = tmp; + } else if (rdev->mc.vram_location >= rdev->mc.gtt_size) { + /* Enough place before vram */ + rdev->mc.gtt_location = 0; + } else { + /* Not enough place after or before shrink + * gart size + */ + if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { rdev->mc.gtt_location = 0; + rdev->mc.gtt_size = rdev->mc.vram_location; } else { - /* Not enough place after or before shrink - * gart size - */ - if (rdev->mc.vram_location > (0xFFFFFFFFUL - tmp)) { - rdev->mc.gtt_location = 0; - rdev->mc.gtt_size = rdev->mc.vram_location; - } else { - rdev->mc.gtt_location = tmp; - rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; - } + rdev->mc.gtt_location = tmp; + rdev->mc.gtt_size = 0xFFFFFFFFUL - tmp; } - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - } else { - rdev->mc.vram_location = 0x00000000UL; - rdev->mc.gtt_location = rdev->mc.mc_vram_size; - rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024; } + rdev->mc.gtt_location = rdev->mc.mc_vram_size; } rdev->mc.vram_start = rdev->mc.vram_location; rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1; -- cgit v1.1 From 6fa8d66af83710b3610bd3b2581f051074f2b416 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 16:10:36 -0500 Subject: drm/radeon/kms: remove some misleading debugging output Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_bios.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_bios.c b/drivers/gpu/drm/radeon/radeon_bios.c index 34a9b91..9069217 100644 --- a/drivers/gpu/drm/radeon/radeon_bios.c +++ b/drivers/gpu/drm/radeon/radeon_bios.c @@ -50,19 +50,16 @@ static bool igp_read_bios_from_vram(struct radeon_device *rdev) vram_base = drm_get_resource_start(rdev->ddev, 0); bios = ioremap(vram_base, size); if (!bios) { - DRM_ERROR("Unable to mmap vram\n"); return false; } if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) { iounmap(bios); - DRM_ERROR("bad rom signature\n"); return false; } rdev->bios = kmalloc(size, GFP_KERNEL); if (rdev->bios == NULL) { iounmap(bios); - DRM_ERROR("kmalloc failed\n"); return false; } memcpy(rdev->bios, bios, size); -- cgit v1.1 From e29649db3bd5620499bf9bdcd63c5cf12edbd26e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 3 Nov 2009 10:04:01 -0500 Subject: drm/radeon/kms/r700: fix some typos in chip init Noticed by Andre on IRC. Also fix up some minor whitespace issues. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/rv770.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index 4055391..ae074fd 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -529,11 +529,11 @@ static void rv770_gpu_init(struct radeon_device *rdev) if (rdev->family == CHIP_RV770) gb_tiling_config |= BANK_TILING(1); else - gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_SHIFT) >> NOOFBANK_MASK); + gb_tiling_config |= BANK_TILING((mc_arb_ramcfg & NOOFBANK_MASK) >> NOOFBANK_SHIFT); gb_tiling_config |= GROUP_SIZE(0); - if (((mc_arb_ramcfg & NOOFROWS_MASK) & NOOFROWS_SHIFT) > 3) { + if (((mc_arb_ramcfg & NOOFROWS_MASK) >> NOOFROWS_SHIFT) > 3) { gb_tiling_config |= ROW_TILING(3); gb_tiling_config |= SAMPLE_SPLIT(3); } else { @@ -579,14 +579,14 @@ static void rv770_gpu_init(struct radeon_device *rdev) /* set HW defaults for 3D engine */ WREG32(CP_QUEUE_THRESHOLDS, (ROQ_IB1_START(0x16) | - ROQ_IB2_START(0x2b))); + ROQ_IB2_START(0x2b))); WREG32(CP_MEQ_THRESHOLDS, STQ_SPLIT(0x30)); WREG32(TA_CNTL_AUX, (DISABLE_CUBE_ANISO | - SYNC_GRADIENT | - SYNC_WALKER | - SYNC_ALIGNER)); + SYNC_GRADIENT | + SYNC_WALKER | + SYNC_ALIGNER)); sx_debug_1 = RREG32(SX_DEBUG_1); sx_debug_1 |= ENABLE_NEW_SMX_ADDRESS; @@ -598,9 +598,9 @@ static void rv770_gpu_init(struct radeon_device *rdev) WREG32(SMX_DC_CTL0, smx_dc_ctl0); WREG32(SMX_EVENT_CTL, (ES_FLUSH_CTL(4) | - GS_FLUSH_CTL(4) | - ACK_FLUSH_CTL(3) | - SYNC_FLUSH_CTL)); + GS_FLUSH_CTL(4) | + ACK_FLUSH_CTL(3) | + SYNC_FLUSH_CTL)); if (rdev->family == CHIP_RV770) WREG32(DB_DEBUG3, DB_CLK_OFF_DELAY(0x1f)); @@ -611,12 +611,12 @@ static void rv770_gpu_init(struct radeon_device *rdev) } WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.rv770.sx_max_export_size / 4) - 1) | - POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | - SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); + POSITION_BUFFER_SIZE((rdev->config.rv770.sx_max_export_pos_size / 4) - 1) | + SMX_BUFFER_SIZE((rdev->config.rv770.sx_max_export_smx_size / 4) - 1))); WREG32(PA_SC_FIFO_SIZE, (SC_PRIM_FIFO_SIZE(rdev->config.rv770.sc_prim_fifo_size) | - SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | - SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); + SC_HIZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_hiz_tile_fifo_size) | + SC_EARLYZ_TILE_FIFO_SIZE(rdev->config.rv770.sc_earlyz_tile_fifo_fize))); WREG32(PA_SC_MULTI_CHIP_CNTL, 0); -- cgit v1.1 From 3a19d56c71bd3a08412d609d219ac8eec0819166 Mon Sep 17 00:00:00 2001 From: Torgny Johansson Date: Wed, 4 Nov 2009 05:25:02 -0800 Subject: cdc_ether: additional Ericsson MBM PID's to the whitelist Signed-off-by: Torgny Johansson Signed-off-by: David S. Miller --- drivers/net/usb/Kconfig | 2 +- drivers/net/usb/cdc_ether.c | 42 +++++++++++++++++++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index c47237c..32d9356 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -174,7 +174,7 @@ config USB_NET_CDCETHER * Ericsson Mobile Broadband Module (all variants) * Motorola (DM100 and SB4100) * Broadcom Cable Modem (reference design) - * Toshiba (PCX1100U and F3507g) + * Toshiba (PCX1100U and F3507g/F3607gw) * ... This driver creates an interface named "ethX", where X depends on diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 4a6aff5..21e1ba1 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -544,20 +544,60 @@ static const struct usb_device_id products [] = { USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { - /* Ericsson F3307 */ + /* Ericsson F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3607gw ver 3 */ USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { + /* Ericsson F3307 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson F3307 ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Ericsson C3607w */ + USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { /* Toshiba F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, }, { + /* Toshiba F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Toshiba F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { /* Dell F3507g */ USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM, USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, +}, { + /* Dell F3607gw ver 2 */ + USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM, + USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE), + .driver_info = (unsigned long) &cdc_info, }, { }, // END }; -- cgit v1.1 From c8ee5538b091b8aca9ca738c6989c5ad6f9e67c0 Mon Sep 17 00:00:00 2001 From: Tonyliu Date: Wed, 4 Nov 2009 05:45:02 -0800 Subject: DaVinci EMAC: correct param for ISR emac_irq is declared as: static irqreturn_t emac_irq(int irq, void *dev_id) { struct net_device *ndev = (struct net_device *)dev_id; struct emac_priv *priv = netdev_priv(ndev); ... Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this. Signed-off-by: Tonyliu Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index f72c56d..3179521 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -2221,7 +2221,7 @@ void emac_poll_controller(struct net_device *ndev) struct emac_priv *priv = netdev_priv(ndev); emac_int_disable(priv); - emac_irq(ndev->irq, priv); + emac_irq(ndev->irq, ndev); emac_int_enable(priv); } #endif -- cgit v1.1 From 02303d2028aef19889415364fc5f7bb374887157 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:25:57 -0800 Subject: isdn: hisax: Fix lock imbalance. Add omittted unlocks to 2 functions. Signed-off-by: Jiri Slaby Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/amd7930_fn.c | 1 + drivers/isdn/hisax/icc.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/isdn/hisax/amd7930_fn.c b/drivers/isdn/hisax/amd7930_fn.c index bf526a7..d6fdf1f 100644 --- a/drivers/isdn/hisax/amd7930_fn.c +++ b/drivers/isdn/hisax/amd7930_fn.c @@ -594,6 +594,7 @@ Amd7930_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, "Amd7930: l1hw: l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) diff --git a/drivers/isdn/hisax/icc.c b/drivers/isdn/hisax/icc.c index 9aba646..c80cbb8 100644 --- a/drivers/isdn/hisax/icc.c +++ b/drivers/isdn/hisax/icc.c @@ -468,6 +468,7 @@ ICC_l1hw(struct PStack *st, int pr, void *arg) if (cs->debug & L1_DEB_WARN) debugl1(cs, " l2l1 tx_skb exist this shouldn't happen"); skb_queue_tail(&cs->sq, skb); + spin_unlock_irqrestore(&cs->lock, flags); break; } if (cs->debug & DEB_DLOG_HEX) -- cgit v1.1 From 08cb3f60b2f866c906a5a779444b30ba8f9a93c8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 4 Nov 2009 08:27:09 -0800 Subject: misdn: Fix reversed 'if' in st_own_ctrl The current code probably returns -EINVAL a lot. Otherwise it would oops. Compile tested only. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/mISDN/stack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/isdn/mISDN/stack.c b/drivers/isdn/mISDN/stack.c index 3e1532a..0d05ec4 100644 --- a/drivers/isdn/mISDN/stack.c +++ b/drivers/isdn/mISDN/stack.c @@ -364,7 +364,7 @@ add_layer2(struct mISDNchannel *ch, struct mISDNstack *st) static int st_own_ctrl(struct mISDNchannel *ch, u_int cmd, void *arg) { - if (!ch->st || ch->st->layer1) + if (!ch->st || !ch->st->layer1) return -EINVAL; return ch->st->layer1->ctrl(ch->st->layer1, cmd, arg); } -- cgit v1.1 From 1ea70841f07666af69e481d4ffdd6edb56db3c92 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:28:12 -0800 Subject: isdn: eicon: Use offsetof Use offsetof instead of explicit implementation. * fixes bug with omitted & like: len = (byte)(((T30_INFO *) 0)->station_id + 20) * avoids compiler warnings with wrong sizes (pointer-to-char cast): len = (byte)(&(((T30_INFO *) 0)->universal_6)); * cleans up the code Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/message.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c index 27d5dd6..ae89fb8 100644 --- a/drivers/isdn/hardware/eicon/message.c +++ b/drivers/isdn/hardware/eicon/message.c @@ -2692,7 +2692,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, if (!(fax_control_bits & T30_CONTROL_BIT_MORE_DOCUMENTS) || (fax_feature_bits & T30_FEATURE_BIT_MORE_DOCUMENTS)) { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); fax_info_change = false; if (ncpi->length >= 4) { @@ -2754,7 +2754,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, for (i = 0; i < w; i++) ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id[i] = fax_parms[4].info[1+i]; ((T30_INFO *)(plci->fax_connect_info_buffer))->head_line_len = 0; - len = (byte)(((T30_INFO *) 0)->station_id + 20); + len = offsetof(T30_INFO, station_id) + 20; w = fax_parms[5].length; if (w > 20) w = 20; @@ -2788,7 +2788,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a, } else { - len = (byte)(&(((T30_INFO *) 0)->universal_6)); + len = offsetof(T30_INFO, universal_6); } fax_info_change = true; @@ -2892,7 +2892,7 @@ static byte connect_b3_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_ENABLE_NSF) && (plci->nsf_control_bits & T30_NSF_CONTROL_BIT_NEGOTIATE_RESP)) { - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -3802,7 +3802,7 @@ static byte manufacturer_res(dword Id, word Number, DIVA_CAPI_ADAPTER *a, break; } ncpi = &m_parms[1]; - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; if (plci->fax_connect_info_length < len) { ((T30_INFO *)(plci->fax_connect_info_buffer))->station_id_len = 0; @@ -6844,7 +6844,7 @@ static void nl_ind(PLCI *plci) if ((plci->requested_options_conn | plci->requested_options | a->requested_options_table[plci->appl->Id-1]) & ((1L << PRIVATE_FAX_SUB_SEP_PWD) | (1L << PRIVATE_FAX_NONSTANDARD))) { - i = ((word)(((T30_INFO *) 0)->station_id + 20)) + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; + i = offsetof(T30_INFO, station_id) + 20 + ((T30_INFO *)plci->NL.RBuffer->P)->head_line_len; while (i < plci->NL.RBuffer->length) plci->ncpi_buffer[++len] = plci->NL.RBuffer->P[i++]; } @@ -7236,7 +7236,7 @@ static void nl_ind(PLCI *plci) { plci->RData[1].P = plci->RData[0].P; plci->RData[1].PLength = plci->RData[0].PLength; - plci->RData[0].P = v120_header_buffer + (-((int) v120_header_buffer) & 3); + plci->RData[0].P = v120_header_buffer + (-((unsigned long)v120_header_buffer) & 3); if ((plci->NL.RBuffer->P[0] & V120_HEADER_EXTEND_BIT) || (plci->NL.RLength == 1)) plci->RData[0].PLength = 1; else @@ -8473,7 +8473,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) fax_control_bits |= T30_CONTROL_BIT_ACCEPT_SEL_POLLING; } len = nlc[0]; - pos = ((byte)(((T30_INFO *) 0)->station_id + 20)); + pos = offsetof(T30_INFO, station_id) + 20; if (pos < plci->fax_connect_info_length) { for (i = 1 + plci->fax_connect_info_buffer[pos]; i != 0; i--) @@ -8525,7 +8525,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp) } PUT_WORD(&(((T30_INFO *)&nlc[1])->control_bits_low), fax_control_bits); - len = ((byte)(((T30_INFO *) 0)->station_id + 20)); + len = offsetof(T30_INFO, station_id) + 20; for (i = 0; i < len; i++) plci->fax_connect_info_buffer[i] = nlc[1+i]; ((T30_INFO *) plci->fax_connect_info_buffer)->head_line_len = 0; -- cgit v1.1 From b9db21f8b964e158f95bb581c887159b6cb98ffa Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 4 Nov 2009 08:30:08 -0800 Subject: isdn: eicon: Return on error When diva_strace_read_uint returns an error, return even from process_idi_event, because l2_state is uninitialized. Signed-off-by: Jiri Slaby Cc: Karsten Keil Acked-by: Armin Schindler Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hardware/eicon/maintidi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hardware/eicon/maintidi.c b/drivers/isdn/hardware/eicon/maintidi.c index 23960cb..41c26e7 100644 --- a/drivers/isdn/hardware/eicon/maintidi.c +++ b/drivers/isdn/hardware/eicon/maintidi.c @@ -959,8 +959,9 @@ static int process_idi_event (diva_strace_context_t* pLib, } if (!strncmp("State\\Layer2 No1", path, pVar->path_length)) { char* tmp = &pLib->lines[0].pInterface->Layer2[0]; - dword l2_state; - diva_strace_read_uint (pVar, &l2_state); + dword l2_state; + if (diva_strace_read_uint(pVar, &l2_state)) + return -1; switch (l2_state) { case 0: -- cgit v1.1 From a947c8f0313c0cf3691b8d8d2b9aaddf372afdcc Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:19 -0800 Subject: isdn: hisax: Fix test in waitforxfw The negation makes it a bool before the comparison and hence it will never be 0x40. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/diva.c | 2 +- drivers/isdn/hisax/hscx_irq.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hisax/diva.c b/drivers/isdn/hisax/diva.c index 018bd29..0b0c2e5 100644 --- a/drivers/isdn/hisax/diva.c +++ b/drivers/isdn/hisax/diva.c @@ -382,7 +382,7 @@ MemwaitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((MemReadHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } diff --git a/drivers/isdn/hisax/hscx_irq.c b/drivers/isdn/hisax/hscx_irq.c index 7b1ad5e..2387d76 100644 --- a/drivers/isdn/hisax/hscx_irq.c +++ b/drivers/isdn/hisax/hscx_irq.c @@ -32,7 +32,7 @@ waitforXFW(struct IsdnCardState *cs, int hscx) { int to = 50; - while ((!(READHSCX(cs, hscx, HSCX_STAR) & 0x44) == 0x40) && to) { + while (((READHSCX(cs, hscx, HSCX_STAR) & 0x44) != 0x40) && to) { udelay(1); to--; } -- cgit v1.1 From 286e633ef0ff5bb63c07b4516665da8004966fec Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Wed, 4 Nov 2009 08:31:59 -0800 Subject: isdn: hfc_usb: Fix read buffer overflow Check whether index is within bounds before testing the element. Signed-off-by: Roel Kluin Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller --- drivers/isdn/hisax/hfc_usb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hisax/hfc_usb.c b/drivers/isdn/hisax/hfc_usb.c index 9de5420..a420b64 100644 --- a/drivers/isdn/hisax/hfc_usb.c +++ b/drivers/isdn/hisax/hfc_usb.c @@ -817,8 +817,8 @@ collect_rx_frame(usb_fifo * fifo, __u8 * data, int len, int finish) } /* we have a complete hdlc packet */ if (finish) { - if ((!fifo->skbuff->data[fifo->skbuff->len - 1]) - && (fifo->skbuff->len > 3)) { + if (fifo->skbuff->len > 3 && + !fifo->skbuff->data[fifo->skbuff->len - 1]) { if (fifon == HFCUSB_D_RX) { DBG(HFCUSB_DBG_DCHANNEL, -- cgit v1.1 From 37b12dd2b07b4d7dc222a5f7f88b25cec532b2aa Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 4 Nov 2009 00:00:25 -0600 Subject: rtl8187: Fix kernel oops when device is removed when LEDS enabled As reported by Rick Farina (sidhayn@gmail.com), removing the RTL8187 USB stick, or unloading the driver rtl8187 using rmmod will cause a kernel oops. There are at least two forms of the failure, (1) BUG: Scheduling while atomic, and (2) a fatal kernel page fault. This problem is reported in Bugzilla #14539. This problem does not occur for kernel 2.6.31, but does for 2.6.32-rc2, thus it is technically a regression; however, bisection did not locate any faulty patch. The fix was found by comparing the faulty code in rtl8187 with p54usb. My interpretation is that the handling of work queues in mac80211 changed enough to the LEDs to be unregistered before tasks on the work queues are cancelled. Previously, these actions could be done in either order. (Herton Ronaldo Krzesinski reports that the code is the same in 2.6.31, so this may be a candidate for 2.6.31.x. -- JWL) Signed-off-by: Larry Finger Reported-by: Rick Farina Tested-by: Rick Farina Cc: stable@kernel.org Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8187_leds.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c index a1c670f..cf8a4a4 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_leds.c +++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c @@ -210,10 +210,10 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev) /* turn the LED off before exiting */ ieee80211_queue_delayed_work(dev, &priv->led_off, 0); - cancel_delayed_work_sync(&priv->led_off); - cancel_delayed_work_sync(&priv->led_on); rtl8187_unregister_led(&priv->led_rx); rtl8187_unregister_led(&priv->led_tx); + cancel_delayed_work_sync(&priv->led_off); + cancel_delayed_work_sync(&priv->led_on); } #endif /* def CONFIG_RTL8187_LED */ -- cgit v1.1 From 22402529df88ec39a59b08a46bced73dd5722b64 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 5 Nov 2009 01:32:44 -0800 Subject: virtio_net: rename driver struct to please modpost MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 3d1285b (move virtnet_remove to .devexit.text) introduced the first reference to __devexit in struct virtio_driver virtio_net which upset modpost ("Section mismatch in reference from the variable virtio_net to the function .devexit.text:virtnet_remove()"). Fix this by renaming virtio_net to virtio_net_driver. Signed-off-by: Uwe Kleine-König Reported-by: Michael S. Tsirkin Blame-taken-by: Rusty Russell Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d9ebac8..bb8b52d 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -999,7 +999,7 @@ static unsigned int features[] = { VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, }; -static struct virtio_driver virtio_net = { +static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), .driver.name = KBUILD_MODNAME, @@ -1012,12 +1012,12 @@ static struct virtio_driver virtio_net = { static int __init init(void) { - return register_virtio_driver(&virtio_net); + return register_virtio_driver(&virtio_net_driver); } static void __exit fini(void) { - unregister_virtio_driver(&virtio_net); + unregister_virtio_driver(&virtio_net_driver); } module_init(init); module_exit(fini); -- cgit v1.1 From 22aecebfd9498c4779e5c5bed1d2d054bd99f7a4 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Wed, 21 Oct 2009 18:01:37 -0700 Subject: acpi-power-meter: Don't leak ACPI error codes to userspace If the ACPI methods return an error code, we must return -EINVAL to userspace to flag the error. Right now we pass the (positive) number right through, which causes echo to keep writing bogus values. Signed-off-by: Darrick J. Wong Acked-by: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/power_meter.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/power_meter.c b/drivers/acpi/power_meter.c index e6bfd77..2ef7030 100644 --- a/drivers/acpi/power_meter.c +++ b/drivers/acpi/power_meter.c @@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource) return -EINVAL; } - return data; + /* _PTP returns 0 on success, nonzero otherwise */ + if (data) + return -EINVAL; + + return 0; } static ssize_t set_trip(struct device *dev, struct device_attribute *devattr, -- cgit v1.1 From 941b10fab2cbd90ac7ad6bc2338ffe30e1d3ce53 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 5 Nov 2009 16:51:40 -0500 Subject: ACPI: add __cpuinit to acpi_processor_add() Annote acpi_processor_add with cpuinit since it calls a cpuinit function acpi_processor_power_init and fixes a section mismatch warning. We were warned by the following warning: LD drivers/acpi/processor.o WARNING: drivers/acpi/processor.o(.text+0x1829): Section mismatch in reference from the function acpi_processor_add() to the function .cpuinit.text:acpi_processor_power_init() The function acpi_processor_add() references the function __cpuinit acpi_processor_power_init(). This is often because acpi_processor_add lacks a __cpuinit annotation or the annotation of acpi_processor_power_init is wrong. Signed-off-by: Rakib Mullick Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index c567b46..ec742a4 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier = .notifier_call = acpi_cpu_soft_notify, }; -static int acpi_processor_add(struct acpi_device *device) +static int __cpuinit acpi_processor_add(struct acpi_device *device) { struct acpi_processor *pr = NULL; int result = 0; -- cgit v1.1 From d410ee5109a1633a686a5663c6743a92e1181f9b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Thu, 22 Oct 2009 09:11:11 +0800 Subject: ACPICA: avoid "Info: mapping multiple BARs. Your kernel is fine." Ensure that memory mappings created for operation regions do not cross page boundaries. Crossing a page boundary while mapping regions can cause warnings if the pages have different attributes. Such regions are probably BIOS bugs, and this is the workaround. http://bugzilla.kernel.org/show_bug.cgi?id=14445 [Kernel summit hacking hour] Signed-off-by: Bob Moore Acked-by: Suresh Siddha Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acconfig.h | 4 ++-- drivers/acpi/acpica/exregion.c | 35 +++++++++++++++++++++++++---------- 2 files changed, 27 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 8e679ef..a4471e3 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -103,9 +103,9 @@ #define ACPI_MAX_REFERENCE_COUNT 0x1000 -/* Size of cached memory mapping for system memory operation region */ +/* Default page size for use in mapping memory for operation regions */ -#define ACPI_SYSMEM_REGION_WINDOW_SIZE 4096 +#define ACPI_DEFAULT_PAGE_SIZE 4096 /* Must be power of 2 */ /* owner_id tracking. 8 entries allows for 255 owner_ids */ diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c index 3a54b73..2bd83ac 100644 --- a/drivers/acpi/acpica/exregion.c +++ b/drivers/acpi/acpica/exregion.c @@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function, void *logical_addr_ptr = NULL; struct acpi_mem_space_context *mem_info = region_context; u32 length; - acpi_size window_size; + acpi_size map_length; + acpi_size page_boundary_map_length; #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED u32 remainder; #endif @@ -144,25 +145,39 @@ acpi_ex_system_memory_space_handler(u32 function, } /* - * Don't attempt to map memory beyond the end of the region, and - * constrain the maximum mapping size to something reasonable. + * Attempt to map from the requested address to the end of the region. + * However, we will never map more than one page, nor will we cross + * a page boundary. */ - window_size = (acpi_size) + map_length = (acpi_size) ((mem_info->address + mem_info->length) - address); - if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) { - window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE; + /* + * If mapping the entire remaining portion of the region will cross + * a page boundary, just map up to the page boundary, do not cross. + * On some systems, crossing a page boundary while mapping regions + * can cause warnings if the pages have different attributes + * due to resource management + */ + page_boundary_map_length = + ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address; + + if (!page_boundary_map_length) { + page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE; + } + + if (map_length > page_boundary_map_length) { + map_length = page_boundary_map_length; } /* Create a new mapping starting at the address given */ - mem_info->mapped_logical_address = - acpi_os_map_memory((acpi_physical_address) address, window_size); + mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length); if (!mem_info->mapped_logical_address) { ACPI_ERROR((AE_INFO, "Could not map memory at %8.8X%8.8X, size %X", ACPI_FORMAT_NATIVE_UINT(address), - (u32) window_size)); + (u32) map_length)); mem_info->mapped_length = 0; return_ACPI_STATUS(AE_NO_MEMORY); } @@ -170,7 +185,7 @@ acpi_ex_system_memory_space_handler(u32 function, /* Save the physical address and mapping size */ mem_info->mapped_physical_address = address; - mem_info->mapped_length = window_size; + mem_info->mapped_length = map_length; } /* -- cgit v1.1 From 5cfa245b0b63c3d79568e78a1ee3d00654d5517d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 17 Oct 2009 08:34:39 +0200 Subject: ACPI: Move dereference after NULL test If the NULL test on pr is needed, then the dereference should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // Signed-off-by: Julia Lawall Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/acpi/processor_throttling.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c index 4c6c14c..1c5d7a8 100644 --- a/drivers/acpi/processor_throttling.c +++ b/drivers/acpi/processor_throttling.c @@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr) int result = 0; struct acpi_processor_throttling *pthrottling; + if (!pr) + return -EINVAL; + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n", pr->throttling.address, pr->throttling.duty_offset, pr->throttling.duty_width)); - if (!pr) - return -EINVAL; - /* * Evaluate _PTC, _TSS and _TPC * They must all be present or none of them can be used. -- cgit v1.1 From 625120a42bd4371da98808a4ca3e7589083a06d8 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Fri, 16 Oct 2009 12:46:02 +0300 Subject: acpi: thermal: Add EOL to the trip_point_N_type strings Make the trip_point_N_type sysfs files return a string ending in EOL for consistency with other sysfs files. Signed-off-by: Amit Kucheria Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 4e83c29..6f8d8f9 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -180,15 +180,15 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr, switch (type) { case THERMAL_TRIP_CRITICAL: - return sprintf(buf, "critical"); + return sprintf(buf, "critical\n"); case THERMAL_TRIP_HOT: - return sprintf(buf, "hot"); + return sprintf(buf, "hot\n"); case THERMAL_TRIP_PASSIVE: - return sprintf(buf, "passive"); + return sprintf(buf, "passive\n"); case THERMAL_TRIP_ACTIVE: - return sprintf(buf, "active"); + return sprintf(buf, "active\n"); default: - return sprintf(buf, "unknown"); + return sprintf(buf, "unknown\n"); } } -- cgit v1.1 From ee59f2b462b0a7d2eb57ae59340d016589fa8e42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:11:46 -0500 Subject: drm/radeon/kms/r600: fix rs880 support v2 Lots of cases were wrong or missing. v2: rebased against drm-next Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600.c | 18 ++++++++++++------ drivers/gpu/drm/radeon/r600_blit_kms.c | 2 +- drivers/gpu/drm/radeon/radeon_atombios.c | 3 ++- 3 files changed, 15 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 3e5703f..35360b0 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -858,7 +858,8 @@ void r600_gpu_init(struct radeon_device *rdev) ((rdev->family) == CHIP_RV630) || ((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(DB_DEBUG, PREZ_MUST_WAIT_FOR_POSTZ_DONE); } else { WREG32(DB_DEBUG, 0); @@ -875,7 +876,8 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = RREG32(SQ_MS_FIFO_SIZES); if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { tmp = (CACHE_FIFO_SIZE(0xa) | FETCH_FIFO_HIWATER(0xa) | DONE_FIFO_HIWATER(0xe0) | @@ -918,7 +920,8 @@ void r600_gpu_init(struct radeon_device *rdev) NUM_ES_STACK_ENTRIES(0)); } else if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { /* no vertex cache */ sq_config &= ~VC_ENABLE; @@ -975,7 +978,8 @@ void r600_gpu_init(struct radeon_device *rdev) if (((rdev->family) == CHIP_RV610) || ((rdev->family) == CHIP_RV620) || - ((rdev->family) == CHIP_RS780)) { + ((rdev->family) == CHIP_RS780) || + ((rdev->family) == CHIP_RS880)) { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(TC_ONLY)); } else { WREG32(VGT_CACHE_INVALIDATION, CACHE_INVALIDATION(VC_AND_TC)); @@ -1001,8 +1005,9 @@ void r600_gpu_init(struct radeon_device *rdev) tmp = rdev->config.r600.max_pipes * 16; switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp += 32; break; case CHIP_RV670: @@ -1043,8 +1048,9 @@ void r600_gpu_init(struct radeon_device *rdev) switch (rdev->family) { case CHIP_RV610: - case CHIP_RS780: case CHIP_RV620: + case CHIP_RS780: + case CHIP_RS880: tmp = TC_L2_SIZE(8); break; case CHIP_RV630: diff --git a/drivers/gpu/drm/radeon/r600_blit_kms.c b/drivers/gpu/drm/radeon/r600_blit_kms.c index acae33e..dbf716e 100644 --- a/drivers/gpu/drm/radeon/r600_blit_kms.c +++ b/drivers/gpu/drm/radeon/r600_blit_kms.c @@ -368,7 +368,7 @@ set_default_state(struct radeon_device *rdev) if ((rdev->family == CHIP_RV610) || (rdev->family == CHIP_RV620) || (rdev->family == CHIP_RS780) || - (rdev->family == CHIP_RS780) || + (rdev->family == CHIP_RS880) || (rdev->family == CHIP_RV710)) sq_config = 0; else diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1c9a9c4..0507224 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -277,7 +277,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_DEVICE_CV_SUPPORT) continue; - if ((rdev->family == CHIP_RS780) && + /* IGP chips */ + if ((rdev->flags & RADEON_IS_IGP) && (con_obj_id == CONNECTOR_OBJECT_ID_PCIE_CONNECTOR)) { uint16_t igp_offset = 0; -- cgit v1.1 From 4170a6c1bc106d7fcf94f5842224ac4dac61006b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 01:16:23 -0500 Subject: drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 2aa5994..355b0fb 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -725,10 +725,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) if (ASIC_IS_DCE32(rdev)) { if (radeon_encoder->pixel_clock > 165000) { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 2) / 100); + args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); args.v2.acConfig.fDualLinkConnector = 1; } else { - args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock * 10 * 4) / 100); + args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,7 +754,10 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock) / 10); + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: -- cgit v1.1 From b75fad0682caacb16012582deecbd7d19bc2f68e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 13:16:01 -0500 Subject: drm/radeon/kms: store detailed connector info This will be useful for mode validation and certain atom tables. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_atombios.c | 76 +++++++++++++- drivers/gpu/drm/radeon/radeon_combios.c | 162 +++++++++++++++++++++-------- drivers/gpu/drm/radeon/radeon_connectors.c | 8 +- drivers/gpu/drm/radeon/radeon_mode.h | 1 + 4 files changed, 199 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 0507224..80aacde 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -46,7 +46,8 @@ radeon_add_atom_connector(struct drm_device *dev, uint32_t supported_device, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, - bool linkb, uint32_t igp_lane_info); + bool linkb, uint32_t igp_lane_info, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -193,6 +194,23 @@ const int supported_devices_connector_convert[] = { DRM_MODE_CONNECTOR_DisplayPort }; +const uint16_t supported_devices_connector_object_id_convert[] = { + CONNECTOR_OBJECT_ID_NONE, + CONNECTOR_OBJECT_ID_VGA, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D, /* not all boards support DL */ + CONNECTOR_OBJECT_ID_VGA, /* technically DVI-A */ + CONNECTOR_OBJECT_ID_COMPOSITE, + CONNECTOR_OBJECT_ID_SVIDEO, + CONNECTOR_OBJECT_ID_LVDS, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_9PIN_DIN, + CONNECTOR_OBJECT_ID_DISPLAYPORT, + CONNECTOR_OBJECT_ID_HDMI_TYPE_A, + CONNECTOR_OBJECT_ID_HDMI_TYPE_B, + CONNECTOR_OBJECT_ID_SVIDEO +}; + const int object_connector_convert[] = { DRM_MODE_CONNECTOR_Unknown, DRM_MODE_CONNECTOR_DVII, @@ -229,7 +247,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) ATOM_OBJECT_HEADER *obj_header; int i, j, path_size, device_support; int connector_type; - uint16_t igp_lane_info, conn_id; + uint16_t igp_lane_info, conn_id, connector_object_id; bool linkb; struct radeon_i2c_bus_rec ddc_bus; @@ -312,6 +330,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) connector_type = object_connector_convert [ct]; + connector_object_id = ct; igp_lane_info = slot_config & 0xffff; } else @@ -322,6 +341,7 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) igp_lane_info = 0; connector_type = object_connector_convert[con_obj_id]; + connector_object_id = con_obj_id; } if (connector_type == DRM_MODE_CONNECTOR_Unknown) @@ -426,7 +446,8 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) le16_to_cpu(path-> usDeviceTag), connector_type, &ddc_bus, - linkb, igp_lane_info); + linkb, igp_lane_info, + connector_object_id); } } @@ -436,6 +457,45 @@ bool radeon_get_atom_connector_info_from_object_table(struct drm_device *dev) return true; } +static uint16_t atombios_get_connector_object_id(struct drm_device *dev, + int connector_type, + uint16_t devices) +{ + struct radeon_device *rdev = dev->dev_private; + + if (rdev->flags & RADEON_IS_IGP) { + return supported_devices_connector_object_id_convert + [connector_type]; + } else if (((connector_type == DRM_MODE_CONNECTOR_DVII) || + (connector_type == DRM_MODE_CONNECTOR_DVID)) && + (devices & ATOM_DEVICE_DFP2_SUPPORT)) { + struct radeon_mode_info *mode_info = &rdev->mode_info; + struct atom_context *ctx = mode_info->atom_context; + int index = GetIndexIntoMasterTable(DATA, XTMDS_Info); + uint16_t size, data_offset; + uint8_t frev, crev; + ATOM_XTMDS_INFO *xtmds; + + atom_parse_data_header(ctx, index, &size, &frev, &crev, &data_offset); + xtmds = (ATOM_XTMDS_INFO *)(ctx->bios + data_offset); + + if (xtmds->ucSupportedLink & ATOM_XTMDS_SUPPORTED_DUALLINK) { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + } else { + if (connector_type == DRM_MODE_CONNECTOR_DVII) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + } + } else { + return supported_devices_connector_object_id_convert + [connector_type]; + } +} + struct bios_connector { bool valid; uint16_t line_mux; @@ -594,14 +654,20 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct /* add the connectors */ for (i = 0; i < ATOM_MAX_SUPPORTED_DEVICE; i++) { - if (bios_connectors[i].valid) + if (bios_connectors[i].valid) { + uint16_t connector_object_id = + atombios_get_connector_object_id(dev, + bios_connectors[i].connector_type, + bios_connectors[i].devices); radeon_add_atom_connector(dev, bios_connectors[i].line_mux, bios_connectors[i].devices, bios_connectors[i]. connector_type, &bios_connectors[i].ddc_bus, - false, 0); + false, 0, + connector_object_id); + } } radeon_link_encoder_connector(dev); diff --git a/drivers/gpu/drm/radeon/radeon_combios.c b/drivers/gpu/drm/radeon/radeon_combios.c index a36ede0..5253cbf 100644 --- a/drivers/gpu/drm/radeon/radeon_combios.c +++ b/drivers/gpu/drm/radeon/radeon_combios.c @@ -49,7 +49,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus); + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id); /* from radeon_legacy_encoder.c */ extern void @@ -1176,7 +1177,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else if (rdev->flags & RADEON_IS_MOBILITY) { /* LVDS */ ddc_i2c = combios_setup_i2c_bus(RADEON_LCD_GPIO_MASK); @@ -1188,7 +1190,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1200,7 +1203,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { /* DVI-I - tv dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); @@ -1218,7 +1222,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); @@ -1230,7 +1235,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } if (rdev->family != CHIP_R100 && rdev->family != CHIP_R200) { @@ -1243,7 +1249,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } break; case CT_IBOOK: @@ -1257,7 +1264,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - TV DAC */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1266,7 +1274,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1275,7 +1284,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_EXTERNAL: DRM_INFO("Connector Table: %d (powerbook external tmds)\n", @@ -1288,7 +1298,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, ext tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1301,10 +1312,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT, 1), ATOM_DEVICE_CRT1_SUPPORT); + /* XXX some are SL */ radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1313,7 +1326,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_INTERNAL: DRM_INFO("Connector Table: %d (powerbook internal tmds)\n", @@ -1326,7 +1340,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* DVI-I - primary dac, int tmds */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1342,7 +1357,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1351,7 +1367,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_POWERBOOK_VGA: DRM_INFO("Connector Table: %d (powerbook vga)\n", @@ -1364,7 +1381,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_LCD1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_LCD1_SUPPORT, - DRM_MODE_CONNECTOR_LVDS, &ddc_i2c); + DRM_MODE_CONNECTOR_LVDS, &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); /* VGA - primary dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_VGA_DDC); radeon_add_legacy_encoder(dev, @@ -1373,7 +1391,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1382,7 +1401,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_EXTERNAL: DRM_INFO("Connector Table: %d (mini external tmds)\n", @@ -1399,10 +1419,12 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_CRT2_SUPPORT, 2), ATOM_DEVICE_CRT2_SUPPORT); + /* XXX are any DL? */ radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP2_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1411,7 +1433,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_MINI_INTERNAL: DRM_INFO("Connector Table: %d (mini internal tmds)\n", @@ -1431,7 +1454,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT | ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_DVII, &ddc_i2c); + DRM_MODE_CONNECTOR_DVII, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1440,7 +1464,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_IMAC_G5_ISIGHT: DRM_INFO("Connector Table: %d (imac g5 isight)\n", @@ -1453,7 +1478,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 0), ATOM_DEVICE_DFP1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_DFP1_SUPPORT, - DRM_MODE_CONNECTOR_DVID, &ddc_i2c); + DRM_MODE_CONNECTOR_DVID, &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_DVI_DDC); radeon_add_legacy_encoder(dev, @@ -1462,7 +1488,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1471,7 +1498,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; case CT_EMAC: DRM_INFO("Connector Table: %d (emac)\n", @@ -1484,7 +1512,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 1), ATOM_DEVICE_CRT1_SUPPORT); radeon_add_legacy_connector(dev, 0, ATOM_DEVICE_CRT1_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* VGA - tv dac */ ddc_i2c = combios_setup_i2c_bus(RADEON_GPIO_CRT2_DDC); radeon_add_legacy_encoder(dev, @@ -1493,7 +1522,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) 2), ATOM_DEVICE_CRT2_SUPPORT); radeon_add_legacy_connector(dev, 1, ATOM_DEVICE_CRT2_SUPPORT, - DRM_MODE_CONNECTOR_VGA, &ddc_i2c); + DRM_MODE_CONNECTOR_VGA, &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); /* TV - TV DAC */ radeon_add_legacy_encoder(dev, radeon_get_encoder_id(dev, @@ -1502,7 +1532,8 @@ bool radeon_get_legacy_connector_info_from_table(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT); radeon_add_legacy_connector(dev, 2, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_INFO("Connector table: %d (invalid)\n", @@ -1596,11 +1627,46 @@ static bool radeon_apply_legacy_tv_quirks(struct drm_device *dev) return true; } +static uint16_t combios_check_dl_dvi(struct drm_device *dev, int is_dvi_d) +{ + struct radeon_device *rdev = dev->dev_private; + uint32_t ext_tmds_info; + + if (rdev->flags & RADEON_IS_IGP) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } + ext_tmds_info = combios_get_table_offset(dev, COMBIOS_EXT_TMDS_INFO_TABLE); + if (ext_tmds_info) { + uint8_t rev = RBIOS8(ext_tmds_info); + uint8_t flags = RBIOS8(ext_tmds_info + 4 + 5); + if (rev >= 3) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } else { + if (flags & 1) { + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I; + } + } + } + if (is_dvi_d) + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D; + else + return CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; +} + bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) { struct radeon_device *rdev = dev->dev_private; uint32_t conn_info, entry, devices; - uint16_t tmp; + uint16_t tmp, connector_object_id; enum radeon_combios_ddc ddc_type; enum radeon_combios_connector connector; int i = 0; @@ -1660,7 +1726,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_D); break; case CONNECTOR_CRT_LEGACY: if (tmp & 0x1) { @@ -1685,7 +1752,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); break; case CONNECTOR_DVI_I_LEGACY: devices = 0; @@ -1714,6 +1782,7 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP2_SUPPORT, 0), ATOM_DEVICE_DFP2_SUPPORT); + connector_object_id = combios_check_dl_dvi(dev, 0); } else { devices |= ATOM_DEVICE_DFP1_SUPPORT; radeon_add_legacy_encoder(dev, @@ -1722,19 +1791,24 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_DFP1_SUPPORT, 0), ATOM_DEVICE_DFP1_SUPPORT); + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; } radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_DVI_D_LEGACY: - if ((tmp >> 4) & 0x1) + if ((tmp >> 4) & 0x1) { devices = ATOM_DEVICE_DFP2_SUPPORT; - else + connector_object_id = combios_check_dl_dvi(dev, 1); + } else { devices = ATOM_DEVICE_DFP1_SUPPORT; + connector_object_id = CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I; + } radeon_add_legacy_encoder(dev, radeon_get_encoder_id (dev, devices, 0), @@ -1742,7 +1816,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, i, devices, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + connector_object_id); break; case CONNECTOR_CTV_LEGACY: case CONNECTOR_STV_LEGACY: @@ -1756,7 +1831,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_TV1_SUPPORT, legacy_connector_convert [connector], - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); break; default: DRM_ERROR("Unknown connector type: %d\n", @@ -1788,7 +1864,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) ATOM_DEVICE_CRT1_SUPPORT | ATOM_DEVICE_DFP1_SUPPORT, DRM_MODE_CONNECTOR_DVII, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SINGLE_LINK_DVI_I); } else { uint16_t crt_info = combios_get_table_offset(dev, COMBIOS_CRT_INFO_TABLE); @@ -1804,7 +1881,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 0, ATOM_DEVICE_CRT1_SUPPORT, DRM_MODE_CONNECTOR_VGA, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_VGA); } else { DRM_DEBUG("No connector info found\n"); return false; @@ -1903,7 +1981,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) 5, ATOM_DEVICE_LCD1_SUPPORT, DRM_MODE_CONNECTOR_LVDS, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_LVDS); } } @@ -1923,7 +2002,8 @@ bool radeon_get_legacy_connector_info_from_bios(struct drm_device *dev) radeon_add_legacy_connector(dev, 6, ATOM_DEVICE_TV1_SUPPORT, DRM_MODE_CONNECTOR_SVIDEO, - &ddc_i2c); + &ddc_i2c, + CONNECTOR_OBJECT_ID_SVIDEO); } } } diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index ce3a785..fb4d918 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -823,7 +823,8 @@ radeon_add_atom_connector(struct drm_device *dev, int connector_type, struct radeon_i2c_bus_rec *i2c_bus, bool linkb, - uint32_t igp_lane_info) + uint32_t igp_lane_info, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -862,6 +863,7 @@ radeon_add_atom_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; radeon_connector->shared_ddc = shared_ddc; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); @@ -1013,7 +1015,8 @@ radeon_add_legacy_connector(struct drm_device *dev, uint32_t connector_id, uint32_t supported_device, int connector_type, - struct radeon_i2c_bus_rec *i2c_bus) + struct radeon_i2c_bus_rec *i2c_bus, + uint16_t connector_object_id) { struct radeon_device *rdev = dev->dev_private; struct drm_connector *connector; @@ -1042,6 +1045,7 @@ radeon_add_legacy_connector(struct drm_device *dev, radeon_connector->connector_id = connector_id; radeon_connector->devices = supported_device; + radeon_connector->connector_object_id = connector_object_id; switch (connector_type) { case DRM_MODE_CONNECTOR_VGA: drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type); diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h index ccb7838..ace726a 100644 --- a/drivers/gpu/drm/radeon/radeon_mode.h +++ b/drivers/gpu/drm/radeon/radeon_mode.h @@ -317,6 +317,7 @@ struct radeon_connector { struct edid *edid; void *con_priv; bool dac_load_detect; + uint16_t connector_object_id; }; struct radeon_framebuffer { -- cgit v1.1 From f95a9f0b05d22cffc46fbd2d065b260f8405e43f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 02:21:06 -0500 Subject: drm/radeon/kms/atom/dce3: call transmitter init on mode set Generally this is done at post, but might not always be done with softboot or for connectors on docking stations. Could probably be done once when the driver loads/resumes rather than on each mode set. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 355b0fb..d42bc51 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -722,14 +722,17 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) atom_parse_cmd_header(rdev->mode_info.atom_context, index, &frev, &crev); args.v1.ucAction = action; - + if (action == ATOM_TRANSMITTER_ACTION_INIT) { + args.v1.usInitInfo = radeon_connector->connector_object_id; + } else { + if (radeon_encoder->pixel_clock > 165000) + args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); + else + args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); + } if (ASIC_IS_DCE32(rdev)) { - if (radeon_encoder->pixel_clock > 165000) { + if (radeon_encoder->pixel_clock > 165000) args.v2.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - args.v2.acConfig.fDualLinkConnector = 1; - } else { - args.v2.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); - } if (dig->dig_block) args.v2.acConfig.ucEncoderSel = 1; @@ -754,10 +757,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action) } } else { args.v1.ucConfig = ATOM_TRANSMITTER_CONFIG_CLKSRC_PPLL; - if (radeon_encoder->pixel_clock > 165000) - args.v1.usPixelClock = cpu_to_le16((radeon_encoder->pixel_clock / 2) / 10); - else - args.v1.usPixelClock = cpu_to_le16(radeon_encoder->pixel_clock / 10); switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_INTERNAL_UNIPHY: @@ -1140,6 +1139,7 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder, /* setup and enable the encoder and transmitter */ atombios_dig_encoder_setup(encoder, ATOM_ENABLE); + atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_INIT); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_SETUP); atombios_dig_transmitter_setup(encoder, ATOM_TRANSMITTER_ACTION_ENABLE); break; -- cgit v1.1 From a3fa6320ce964f799388b152a1b0f6e2c3b32a7f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 5 Nov 2009 11:57:07 -0500 Subject: drm/radeon/kms: initial mode validation support Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_connectors.c | 48 +++++++++++++++++++++++++++++- 1 file changed, 47 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index fb4d918..fce4c40 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -397,6 +397,30 @@ static int radeon_lvds_get_modes(struct drm_connector *connector) static int radeon_lvds_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + struct drm_encoder *encoder = radeon_best_single_encoder(connector); + + if ((mode->hdisplay < 320) || (mode->vdisplay < 240)) + return MODE_PANEL; + + if (encoder) { + struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder); + struct drm_display_mode *native_mode = &radeon_encoder->native_mode; + + /* AVIVO hardware supports downscaling modes larger than the panel + * to the panel size, but I'm not sure this is desirable. + */ + if ((mode->hdisplay > native_mode->hdisplay) || + (mode->vdisplay > native_mode->vdisplay)) + return MODE_PANEL; + + /* if scaling is disabled, block non-native modes */ + if (radeon_encoder->rmx_type == RMX_OFF) { + if ((mode->hdisplay != native_mode->hdisplay) || + (mode->vdisplay != native_mode->vdisplay)) + return MODE_PANEL; + } + } + return MODE_OK; } @@ -512,6 +536,8 @@ static int radeon_vga_get_modes(struct drm_connector *connector) static int radeon_vga_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + /* XXX check mode bandwidth */ + /* XXX verify against max DAC output frequency */ return MODE_OK; } @@ -609,6 +635,8 @@ static int radeon_tv_get_modes(struct drm_connector *connector) static int radeon_tv_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { + if ((mode->hdisplay > 1024) || (mode->vdisplay > 768)) + return MODE_CLOCK_RANGE; return MODE_OK; } @@ -801,9 +829,27 @@ static void radeon_dvi_force(struct drm_connector *connector) radeon_connector->use_digital = true; } +static int radeon_dvi_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct radeon_connector *radeon_connector = to_radeon_connector(connector); + + /* XXX check mode bandwidth */ + + if (radeon_connector->use_digital && (mode->clock > 165000)) { + if ((radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_I) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_DUAL_LINK_DVI_D) || + (radeon_connector->connector_object_id == CONNECTOR_OBJECT_ID_HDMI_TYPE_B)) + return MODE_OK; + else + return MODE_CLOCK_HIGH; + } + return MODE_OK; +} + struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = { .get_modes = radeon_dvi_get_modes, - .mode_valid = radeon_vga_mode_valid, + .mode_valid = radeon_dvi_mode_valid, .best_encoder = radeon_dvi_encoder, }; -- cgit v1.1 From 24395a85d8efe6eee477ea35c73d045a8dd7a3a1 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:27 +1100 Subject: md: don't clear endpoint for resync when resync is interrupted. If a 'sync_max' has been set (via sysfs), it is wrong to clear it until a resync (or reshape or recovery ...) actually reached that point. So if a resync is interrupted (e.g. by device failure), leave 'resync_max' unchanged. This is particularly important for 'reshape' operations that do not change the size of the array. For such operations mdadm needs to monitor the reshape taking rolling backups of the section being reshaped. If resync_max gets cleared, the reshape can get ahead of mdadm and then the backups that mdadm creates are useless. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/md.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/md.c b/drivers/md/md.c index 10eb1fc..e64c971 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6504,8 +6504,9 @@ void md_do_sync(mddev_t *mddev) skip: mddev->curr_resync = 0; mddev->curr_resync_completed = 0; - mddev->resync_min = 0; - mddev->resync_max = MaxSector; + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) + /* We completed so max setting can be forgotten. */ + mddev->resync_max = MaxSector; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); wake_up(&resync_wait); set_bit(MD_RECOVERY_DONE, &mddev->recovery); -- cgit v1.1 From 8dee7211467a56b7eb4e4359efb0aa4a72e1b6f3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 6 Nov 2009 14:59:29 +1100 Subject: md/raid5: make sure curr_sync_completes is uptodate when reshape starts This value is visible through sysfs and is used by mdadm when it manages a reshape (backing up data that is about to be rearranged). So it is important that it is always correct. Current it does not get updated properly when a reshape starts which can cause problems when assembling an array that is in the middle of being reshaped. This is suitable for 2.6.31.y stable kernels. Cc: stable@kernel.org Signed-off-by: NeilBrown --- drivers/md/raid5.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 81abefc..dcce204 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4049,6 +4049,8 @@ static sector_t reshape_request(mddev_t *mddev, sector_t sector_nr, int *skipped sector_nr = conf->reshape_progress; sector_div(sector_nr, new_data_disks); if (sector_nr) { + mddev->curr_resync_completed = sector_nr; + sysfs_notify(&mddev->kobj, NULL, "sync_completed"); *skipped = 1; return sector_nr; } -- cgit v1.1 From 8a1cbf64977f89e9e9bc1d80dd01503337424f96 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Mon, 19 Oct 2009 09:41:53 -0200 Subject: ACPI: add DMI entry for SCI_EN resume quirk on HP dv4 Fixes the missing battery on sleep problem for yet another HP laptop ("HP Pavilion dv4"). Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=13449 Signed-off-by: Gustavo Maciel Dias Vieira Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index a90afcc..ed9760a 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -413,6 +413,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- cgit v1.1 From 7433874e31f7f2e6e942b12012790565731d0f4a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Tue, 3 Nov 2009 00:53:02 +0100 Subject: drm/radeon/kms: add debugfs for power management for AtomBIOS devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/Makefile | 2 +- drivers/gpu/drm/radeon/r420.c | 2 + drivers/gpu/drm/radeon/r520.c | 2 + drivers/gpu/drm/radeon/r600.c | 3 ++ drivers/gpu/drm/radeon/radeon.h | 8 ++++ drivers/gpu/drm/radeon/radeon_asic.h | 23 +++++++++++ drivers/gpu/drm/radeon/radeon_atombios.c | 18 +++++++++ drivers/gpu/drm/radeon/radeon_clocks.c | 2 +- drivers/gpu/drm/radeon/radeon_pm.c | 65 ++++++++++++++++++++++++++++++++ drivers/gpu/drm/radeon/rs600.c | 2 + drivers/gpu/drm/radeon/rs690.c | 2 + drivers/gpu/drm/radeon/rv515.c | 2 + drivers/gpu/drm/radeon/rv770.c | 3 ++ 13 files changed, 132 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/radeon/radeon_pm.c (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile index 09a28923..b5713ee 100644 --- a/drivers/gpu/drm/radeon/Makefile +++ b/drivers/gpu/drm/radeon/Makefile @@ -49,7 +49,7 @@ radeon-y += radeon_device.o radeon_kms.o \ radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \ rs400.o rs600.o rs690.o rv515.o r520.o r600.o rv770.o radeon_test.o \ r200.o radeon_legacy_tv.o r600_cs.o r600_blit.o r600_blit_shaders.o \ - r600_blit_kms.o + r600_blit_kms.o radeon_pm.o radeon-$(CONFIG_COMPAT) += radeon_ioc32.o diff --git a/drivers/gpu/drm/radeon/r420.c b/drivers/gpu/drm/radeon/r420.c index 5c7fe52..1cefdbc 100644 --- a/drivers/gpu/drm/radeon/r420.c +++ b/drivers/gpu/drm/radeon/r420.c @@ -311,6 +311,8 @@ int r420_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r300_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c index a555b7b..f743518 100644 --- a/drivers/gpu/drm/radeon/r520.c +++ b/drivers/gpu/drm/radeon/r520.c @@ -260,6 +260,8 @@ int r520_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ r520_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index 35360b0..8d6bc12 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -1621,10 +1621,13 @@ int r600_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index ea3efd7..9f0bd98 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -139,6 +139,10 @@ struct radeon_clock { uint32_t default_sclk; }; +/* + * Power management + */ +int radeon_pm_init(struct radeon_device *rdev); /* * Fences. @@ -622,7 +626,9 @@ struct radeon_asic { uint64_t dst_offset, unsigned num_pages, struct radeon_fence *fence); + uint32_t (*get_engine_clock)(struct radeon_device *rdev); void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock); + uint32_t (*get_memory_clock)(struct radeon_device *rdev); void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock); void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes); void (*set_clock_gating)(struct radeon_device *rdev, int enable); @@ -953,7 +959,9 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v) #define radeon_copy_blit(rdev, s, d, np, f) (rdev)->asic->copy_blit((rdev), (s), (d), (np), (f)) #define radeon_copy_dma(rdev, s, d, np, f) (rdev)->asic->copy_dma((rdev), (s), (d), (np), (f)) #define radeon_copy(rdev, s, d, np, f) (rdev)->asic->copy((rdev), (s), (d), (np), (f)) +#define radeon_get_engine_clock(rdev) (rdev)->asic->get_engine_clock((rdev)) #define radeon_set_engine_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) +#define radeon_get_memory_clock(rdev) (rdev)->asic->get_memory_clock((rdev)) #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e)) #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l)) #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e)) diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index d38f996..94991ed 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -31,10 +31,13 @@ /* * common functions */ +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev); void radeon_legacy_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable); +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev); void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock); +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev); void radeon_atom_set_memory_clock(struct radeon_device *rdev, uint32_t mem_clock); void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable); @@ -93,7 +96,9 @@ static struct radeon_asic r100_asic = { .copy_blit = &r100_copy_blit, .copy_dma = NULL, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -145,7 +150,9 @@ static struct radeon_asic r300_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -181,7 +188,9 @@ static struct radeon_asic r420_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -222,7 +231,9 @@ static struct radeon_asic rs400_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_legacy_get_engine_clock, .set_engine_clock = &radeon_legacy_set_engine_clock, + .get_memory_clock = NULL, .set_memory_clock = NULL, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_legacy_set_clock_gating, @@ -267,7 +278,9 @@ static struct radeon_asic rs600_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -305,7 +318,9 @@ static struct radeon_asic rs690_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r300_copy_dma, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -349,7 +364,9 @@ static struct radeon_asic rv515_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -384,7 +401,9 @@ static struct radeon_asic r520_asic = { .copy_blit = &r100_copy_blit, .copy_dma = &r300_copy_dma, .copy = &r100_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = &rv370_set_pcie_lanes, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -445,7 +464,9 @@ static struct radeon_asic r600_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, @@ -481,7 +502,9 @@ static struct radeon_asic rv770_asic = { .copy_blit = &r600_copy_blit, .copy_dma = &r600_copy_blit, .copy = &r600_copy_blit, + .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, + .get_memory_clock = &radeon_atom_get_memory_clock, .set_memory_clock = &radeon_atom_set_memory_clock, .set_pcie_lanes = NULL, .set_clock_gating = &radeon_atom_set_clock_gating, diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 80aacde..2ed88a8 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -1133,6 +1133,24 @@ void radeon_atom_static_pwrmgt_setup(struct radeon_device *rdev, int enable) atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); } +uint32_t radeon_atom_get_engine_clock(struct radeon_device *rdev) +{ + GET_ENGINE_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetEngineClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnEngineClock; +} + +uint32_t radeon_atom_get_memory_clock(struct radeon_device *rdev) +{ + GET_MEMORY_CLOCK_PS_ALLOCATION args; + int index = GetIndexIntoMasterTable(COMMAND, GetMemoryClock); + + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + return args.ulReturnMemoryClock; +} + void radeon_atom_set_engine_clock(struct radeon_device *rdev, uint32_t eng_clock) { diff --git a/drivers/gpu/drm/radeon/radeon_clocks.c b/drivers/gpu/drm/radeon/radeon_clocks.c index f5c32a7..a813541 100644 --- a/drivers/gpu/drm/radeon/radeon_clocks.c +++ b/drivers/gpu/drm/radeon/radeon_clocks.c @@ -32,7 +32,7 @@ #include "atom.h" /* 10 khz */ -static uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) +uint32_t radeon_legacy_get_engine_clock(struct radeon_device *rdev) { struct radeon_pll *spll = &rdev->clock.spll; uint32_t fb_div, ref_div, post_div, sclk; diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c new file mode 100644 index 0000000..46146c6 --- /dev/null +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -0,0 +1,65 @@ +/* + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: Rafał Miłecki + */ +#include "drmP.h" +#include "radeon.h" + +int radeon_debugfs_pm_init(struct radeon_device *rdev); + +int radeon_pm_init(struct radeon_device *rdev) +{ + if (radeon_debugfs_pm_init(rdev)) { + DRM_ERROR("Failed to register debugfs file for CP !\n"); + } + + return 0; +} + +/* + * Debugfs info + */ +#if defined(CONFIG_DEBUG_FS) + +static int radeon_debugfs_pm_info(struct seq_file *m, void *data) +{ + struct drm_info_node *node = (struct drm_info_node *) m->private; + struct drm_device *dev = node->minor->dev; + struct radeon_device *rdev = dev->dev_private; + + seq_printf(m, "engine clock: %u0 Hz\n", radeon_get_engine_clock(rdev)); + seq_printf(m, "memory clock: %u0 Hz\n", radeon_get_memory_clock(rdev)); + + return 0; +} + +static struct drm_info_list radeon_pm_info_list[] = { + {"radeon_pm_info", radeon_debugfs_pm_info, 0, NULL}, +}; +#endif + +int radeon_debugfs_pm_init(struct radeon_device *rdev) +{ +#if defined(CONFIG_DEBUG_FS) + return radeon_debugfs_add_files(rdev, radeon_pm_info_list, ARRAY_SIZE(radeon_pm_info_list)); +#else + return 0; +#endif +} diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c index 942754c..5f117cd 100644 --- a/drivers/gpu/drm/radeon/rs600.c +++ b/drivers/gpu/drm/radeon/rs600.c @@ -488,6 +488,8 @@ int rs600_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs600_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c index 025e322..2754717 100644 --- a/drivers/gpu/drm/radeon/rs690.c +++ b/drivers/gpu/drm/radeon/rs690.c @@ -706,6 +706,8 @@ int rs690_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rs690_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c index 03c052d..7935f79 100644 --- a/drivers/gpu/drm/radeon/rv515.c +++ b/drivers/gpu/drm/radeon/rv515.c @@ -587,6 +587,8 @@ int rv515_init(struct radeon_device *rdev) } /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); + /* Initialize power management */ + radeon_pm_init(rdev); /* Get vram informations */ rv515_vram_info(rdev); /* Initialize memory controller (also test AGP) */ diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c index ae074fd..b0efd0d 100644 --- a/drivers/gpu/drm/radeon/rv770.c +++ b/drivers/gpu/drm/radeon/rv770.c @@ -983,10 +983,13 @@ int rv770_init(struct radeon_device *rdev) r600_scratch_init(rdev); /* Initialize surface registers */ radeon_surface_init(rdev); + /* Initialize clocks */ radeon_get_clock_info(rdev->ddev); r = radeon_clocks_init(rdev); if (r) return r; + /* Initialize power management */ + radeon_pm_init(rdev); /* Fence driver */ r = radeon_fence_driver_init(rdev); if (r) -- cgit v1.1 From 2839d396e3ae0891c1fdd87aa1cea218e6f5c4df Mon Sep 17 00:00:00 2001 From: Vaibhav Verma Date: Thu, 5 Nov 2009 23:13:36 -0500 Subject: ACPI: sleep: another HP/Compaq DMI entries for init_set_sci_en_on_resume http://bugzilla.kernel.org/show_bug.cgi?id=13745 Signed-off-by: Len Brown --- drivers/acpi/sleep.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index ed9760a..4cc1b81 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -421,6 +421,22 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { }, }, { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Pavilion dv7", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv7"), + }, + }, + { + .callback = init_set_sci_en_on_resume, + .ident = "Hewlett-Packard Compaq Presario CQ40 Notebook PC", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "Compaq Presario CQ40 Notebook PC"), + }, + }, + { .callback = init_old_suspend_ordering, .ident = "Panasonic CF51-2L", .matches = { -- cgit v1.1 From f5209b4446d185cc95f46363f8043a743530c15a Mon Sep 17 00:00:00 2001 From: Sathya Perla Date: Fri, 6 Nov 2009 00:31:01 -0800 Subject: be2net: Fix CQE_STATUS_EXTD_SHIFT define Signed-off-by: Sathya Perla Signed-off-by: David S. Miller --- drivers/net/benet/be_cmds.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h index 4995378..e5f9676 100644 --- a/drivers/net/benet/be_cmds.h +++ b/drivers/net/benet/be_cmds.h @@ -68,7 +68,7 @@ enum { #define CQE_STATUS_COMPL_MASK 0xFFFF #define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */ #define CQE_STATUS_EXTD_MASK 0xFFFF -#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */ +#define CQE_STATUS_EXTD_SHIFT 16 /* bits 16 - 31 */ struct be_mcc_compl { u32 status; /* dword 0 */ -- cgit v1.1 From 0fb18c4777ff424c1db694af98443a201fa4fc30 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 6 Nov 2009 04:52:50 -0800 Subject: Revert "ide: try to use PIO Mode 0 during probe if possible" This reverts commit 6029336426a2b43e4bc6f4a84be8789a047d139e. Ok, we really do need to revert this, even with Bart's sis5513.c fix in there. The problem is that several driver's ->set_pio_mode() method depends upon the drive->media type being set properly. Most of them use this to enable prefetching, which can only be done for disk media. But the commit being reverted here calls ->set_pio_mode() before it's setup. Actually it considers everything disk because that is the default media type set by ide_port_init_devices_data(). The set of drivers that depend upon the media type in their ->set_pio_method() are: drivers/ide/alim15x3.c drivers/ide/it8172.c drivers/ide/it8213.c drivers/ide/pdc202xx_old.c drivers/ide/piix.c drivers/ide/qd65xx.c drivers/ide/sis5513.c drivers/ide/slc90e66.c And it is possible that we could fix this by guarding the prefetching and other media dependent setting changes with a test on IDE_PFLAG_PROBING in hwif->port_flags, that's simply too risky for 2.6.32-rcX and -stable. Signed-off-by: David S. Miller --- drivers/ide/ide-probe.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 63c53d6..4d76ba4 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1046,15 +1046,6 @@ static void ide_port_init_devices(ide_hwif_t *hwif) if (port_ops && port_ops->init_dev) port_ops->init_dev(drive); } - - ide_port_for_each_dev(i, drive, hwif) { - /* - * default to PIO Mode 0 before we figure out - * the most suited mode for the attached device - */ - if (port_ops && port_ops->set_pio_mode) - port_ops->set_pio_mode(drive, 0); - } } static void ide_init_port(ide_hwif_t *hwif, unsigned int port, -- cgit v1.1 From 143d40f3ab8fbd8ca2fe712ec8e072d687142804 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 6 Nov 2009 12:58:20 -0500 Subject: Revert "ipw2200: fix oops on missing firmware" This reverts commit e6c5fc53d0f44a772398402ee8a1879818e42b4e. Based on this regression report: Date: Thu, 05 Nov 2009 15:59:16 +0100 From: Holger Schurig To: linux-wireless@vger.kernel.org Subject: BUG: oops when "rmmod ipw2200" This happened on wireless-testing v2.6.32-rc6-41575-g5e68bfb. I modprobed ipw2200, put it into monitor mode, used tshark a while to monitor, then I stopped tshark, "ifconfig eth2 down" and finally "rmmod ipw2200", and voila: [ 917.189620] ------------[ cut here ]------------ [ 917.189717] kernel BUG at net/wireless/core.c:543! [ 917.189805] invalid opcode: 0000 [#1] PREEMPT SMP [ 917.190002] last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:02:0d.0/firmware/0000:02:0d.0/loading [ 917.190136] Modules linked in: lib80211_crypt_wep ipw2200(-) libipw lib80211 ath5k mac80211 ath cfg80211 psmouse uhci_hcd [ 917.190680] [ 917.190759] Pid: 1763, comm: rmmod Not tainted (2.6.32-rc6-wl #26) Amilo M1425 [ 917.190886] EIP: 0060:[] EFLAGS: 00010202 CPU: 0 [ 917.190992] EIP is at wiphy_unregister+0xd3/0x175 [cfg80211] [ 917.191083] EAX: f601d4c4 EBX: 00000000 ECX: 00000000 EDX: f79e8600 [ 917.191176] ESI: f601d400 EDI: f95b4350 EBP: f6009eb4 ESP: f6009e8c [ 917.191269] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 917.191360] Process rmmod (pid: 1763, ti=f6008000 task=f79e8130 task.ti=f6008000) [ 917.191486] Stack: [ 917.191562] f601d5a0 f601d484 f6460e98 f6009ea0 c01407ee f6009eb8 00000246 f64604c0 [ 917.191916] <0> f6460e5c f95b4350 f6009ec0 f94fd030 f6460e98 f6009edc f95a9d4f f787bc00 [ 917.192100] <0> f787bc58 f787bc00 f95b4350 f95b4350 f6009ee8 c0207fca f787bc58 f6009ef8 [ 917.192100] Call Trace: [ 917.192100] [] ? trace_hardirqs_on+0xb/0xd [ 917.192100] [] ? unregister_ieee80211+0xe/0x27 [libipw] [ 917.192100] [] ? ipw_pci_remove+0x59/0x227 [ipw2200] [ 917.192100] [] ? pci_device_remove+0x19/0x39 [ 917.192100] [] ? __device_release_driver+0x59/0x9d [ 917.192100] [] ? driver_detach+0x67/0x85 [ 917.192100] [] ? bus_remove_driver+0x69/0x85 [ 917.192100] [] ? driver_unregister+0x4d/0x54 [ 917.192100] [] ? pci_unregister_driver+0x28/0x71 [ 917.192100] [] ? ipw_exit+0x1c/0x1e [ipw2200] [ 917.192100] [] ? sys_delete_module+0x192/0x1ef [ 917.192100] [] ? remove_vma+0x52/0x58 [ 917.192100] [] ? sysenter_exit+0xf/0x18 [ 917.192100] [] ? sysenter_do_call+0x12/0x36 [ 917.192100] Code: 74 07 e8 81 bc 8c c7 eb c8 8d 55 e0 89 f8 e8 d6 6d 66 c7 8b 45 dc 31 d2 e8 81 cc 8c c7 8d 86 c4 00 00 00 39 86 c4 00 00 00 74 04 <0f> 0b eb fe 8b 45 dc 8d 5e 0c e8 5a cc 8c c7 8b 86 94 03 00 00 [ 917.192100] EIP: [] wiphy_unregister+0xd3/0x175 [cfg80211] SS:ESP 0068:f6009e8c [ 917.203718] ---[ end trace bcaaf449945a5100 ]--- Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2100.c | 5 +---- drivers/net/wireless/ipw2x00/ipw2200.c | 2 -- drivers/net/wireless/ipw2x00/libipw.h | 1 - drivers/net/wireless/ipw2x00/libipw_module.c | 14 +++++--------- 4 files changed, 6 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index a741d37..240cff1 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -6325,10 +6325,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail: if (dev) { - if (registered) { - unregister_ieee80211(priv->ieee); + if (registered) unregister_netdev(dev); - } ipw2100_hw_stop_adapter(priv); @@ -6385,7 +6383,6 @@ static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev) /* Unregister the device first - this results in close() * being called if the device is open. If we free storage * first, then close() will crash. */ - unregister_ieee80211(priv->ieee); unregister_netdev(dev); /* ipw2100_down will ensure that there is no more pending work diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 04341a2..8d58e6e 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11821,7 +11821,6 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); goto out_remove_sysfs; } @@ -11872,7 +11871,6 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) mutex_unlock(&priv->mutex); - unregister_ieee80211(priv->ieee); unregister_netdev(priv->net_dev); if (priv->rxq) { diff --git a/drivers/net/wireless/ipw2x00/libipw.h b/drivers/net/wireless/ipw2x00/libipw.h index f42ade6..bf45391 100644 --- a/drivers/net/wireless/ipw2x00/libipw.h +++ b/drivers/net/wireless/ipw2x00/libipw.h @@ -1020,7 +1020,6 @@ static inline int libipw_is_cck_rate(u8 rate) /* ieee80211.c */ extern void free_ieee80211(struct net_device *dev, int monitor); extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor); -extern void unregister_ieee80211(struct libipw_device *ieee); extern int libipw_change_mtu(struct net_device *dev, int new_mtu); extern void libipw_networks_age(struct libipw_device *ieee, diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c index be5b809..a0e9f6a 100644 --- a/drivers/net/wireless/ipw2x00/libipw_module.c +++ b/drivers/net/wireless/ipw2x00/libipw_module.c @@ -235,19 +235,16 @@ void free_ieee80211(struct net_device *dev, int monitor) libipw_networks_free(ieee); /* free cfg80211 resources */ - if (!monitor) + if (!monitor) { + wiphy_unregister(ieee->wdev.wiphy); + kfree(ieee->a_band.channels); + kfree(ieee->bg_band.channels); wiphy_free(ieee->wdev.wiphy); + } free_netdev(dev); } -void unregister_ieee80211(struct libipw_device *ieee) -{ - wiphy_unregister(ieee->wdev.wiphy); - kfree(ieee->a_band.channels); - kfree(ieee->bg_band.channels); -} - #ifdef CONFIG_LIBIPW_DEBUG static int debug = 0; @@ -333,4 +330,3 @@ module_init(libipw_init); EXPORT_SYMBOL(alloc_ieee80211); EXPORT_SYMBOL(free_ieee80211); -EXPORT_SYMBOL(unregister_ieee80211); -- cgit v1.1 From 66f84d6594729c866c0c03fe97159a987dad7d84 Mon Sep 17 00:00:00 2001 From: Sean Cross Date: Thu, 5 Nov 2009 20:22:03 +0100 Subject: rt2x00: Don't queue ieee80211 work after USB removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This prevents the rt2x00 driver from queueing ieee80211 work after the   USB card has been removed, preventing a kernel panic. Signed-off-by: Sean Cross Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2x00dev.c | 4 ++-- drivers/net/wireless/rt2x00/rt2x00link.c | 11 +++++++---- drivers/net/wireless/rt2x00/rt2x00usb.c | 9 ++++++++- 3 files changed, 17 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 71761b3..73bbec5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -815,6 +815,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) mutex_init(&rt2x00dev->csr_mutex); + set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); + /* * Make room for rt2x00_intf inside the per-interface * structure ieee80211_vif. @@ -871,8 +873,6 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_register(rt2x00dev); rt2x00debug_register(rt2x00dev); - set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - return 0; exit: diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c index c64db0b..c708d0b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00link.c +++ b/drivers/net/wireless/rt2x00/rt2x00link.c @@ -362,8 +362,9 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev) rt2x00link_reset_tuner(rt2x00dev, false); - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_stop_tuner(struct rt2x00_dev *rt2x00dev) @@ -469,8 +470,10 @@ static void rt2x00link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ link->count++; - ieee80211_queue_delayed_work(rt2x00dev->hw, - &link->work, LINK_TUNE_INTERVAL); + + if (test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + ieee80211_queue_delayed_work(rt2x00dev->hw, + &link->work, LINK_TUNE_INTERVAL); } void rt2x00link_register(struct rt2x00_dev *rt2x00dev) diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5015448..f02b48a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -47,6 +47,8 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, (requesttype == USB_VENDOR_REQUEST_IN) ? usb_rcvctrlpipe(usb_dev, 0) : usb_sndctrlpipe(usb_dev, 0); + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; for (i = 0; i < REGISTER_BUSY_COUNT; i++) { status = usb_control_msg(usb_dev, pipe, request, requesttype, @@ -60,8 +62,10 @@ int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, * -ENODEV: Device has disappeared, no point continuing. * All other errors: Try again. */ - else if (status == -ENODEV) + else if (status == -ENODEV) { + clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); break; + } } ERROR(rt2x00dev, @@ -161,6 +165,9 @@ int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, { unsigned int i; + if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags)) + return -ENODEV; + for (i = 0; i < REGISTER_BUSY_COUNT; i++) { rt2x00usb_register_read_lock(rt2x00dev, offset, reg); if (!rt2x00_get_field32(*reg, field)) -- cgit v1.1 From 761434a318a64bf521f8abcc920e1d9837640fa2 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Fri, 6 Nov 2009 16:22:44 +0900 Subject: PCI ASPM: fix oops on root port removal Fix the following BUG_ON() problem reported by Alex Chiang. This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[] [] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [] pcie_aspm_exit_link_state+0xf5/0x11e [] pci_stop_bus_device+0x76/0x7e [] pci_stop_bus_device+0x2b/0x7e [] pci_remove_bus_device+0x15/0xb9 [] remove_callback+0x29/0x3a [] sysfs_schedule_callback_work+0x15/0x6d [] worker_thread+0x19d/0x298 [] ? worker_thread+0x148/0x298 [] ? sysfs_schedule_callback_work+0x0/0x6d [] ? autoremove_wake_function+0x0/0x38 [] ? worker_thread+0x0/0x298 [] kthread+0x7d/0x85 [] child_rip+0xa/0x20 [] ? restore_args+0x0/0x30 [] ? kthread+0x0/0x85 [] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [] pcie_update_aspm_capable+0x15/0xbe RSP ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang Signed-off-by: Kenji Kaneshige Tested-by: Alex Chiang Signed-off-by: Jesse Barnes --- drivers/pci/pcie/aspm.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 745402e..5b7056c 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -656,8 +656,10 @@ void pcie_aspm_exit_link_state(struct pci_dev *pdev) free_link_state(link); /* Recheck latencies and configure upstream links */ - pcie_update_aspm_capable(root); - pcie_config_aspm_path(parent_link); + if (parent_link) { + pcie_update_aspm_capable(root); + pcie_config_aspm_path(parent_link); + } out: mutex_unlock(&aspm_lock); up_read(&pci_bus_sem); -- cgit v1.1 From 9e90c961134929678022aee0c68b16c1ed520614 Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:06:59 +0000 Subject: be2net: fix to set proper flow control on resume If be2 goes into suspend after a user changes the flow control settings, we are not programming them back after resume. This patch takes care of it. We now get the flow control settings before going to suspend mode and then apply them during resume. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be.h | 2 ++ drivers/net/benet/be_ethtool.c | 8 +++++--- drivers/net/benet/be_main.c | 8 +++++++- 3 files changed, 14 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h index a80da0e..3b79a22 100644 --- a/drivers/net/benet/be.h +++ b/drivers/net/benet/be.h @@ -259,6 +259,8 @@ struct be_adapter { u32 port_num; bool promiscuous; u32 cap; + u32 rx_fc; /* Rx flow control */ + u32 tx_fc; /* Tx flow control */ }; extern const struct ethtool_ops be_ethtool_ops; diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c index cda5bf2..f0fd95b 100644 --- a/drivers/net/benet/be_ethtool.c +++ b/drivers/net/benet/be_ethtool.c @@ -323,10 +323,12 @@ be_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *ecmd) if (ecmd->autoneg != 0) return -EINVAL; + adapter->tx_fc = ecmd->tx_pause; + adapter->rx_fc = ecmd->rx_pause; - status = be_cmd_set_flow_control(adapter, ecmd->tx_pause, - ecmd->rx_pause); - if (!status) + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) dev_warn(&adapter->pdev->dev, "Pause param set failed.\n"); return status; diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 1f941f0..4a7a452 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1652,7 +1652,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto mccqs_destroy; - status = be_cmd_set_flow_control(adapter, true, true); + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); if (status != 0) goto mccqs_destroy; return 0; @@ -1909,6 +1910,10 @@ static void be_netdev_init(struct net_device *netdev) adapter->rx_csum = true; + /* Default settings for Rx and Tx flow control */ + adapter->rx_fc = true; + adapter->tx_fc = true; + netif_set_gso_max_size(netdev, 65535); BE_SET_NETDEV_OPS(netdev, &be_netdev_ops); @@ -2171,6 +2176,7 @@ static int be_suspend(struct pci_dev *pdev, pm_message_t state) be_close(netdev); rtnl_unlock(); } + be_cmd_get_flow_control(adapter, &adapter->tx_fc, &adapter->rx_fc); be_clear(adapter); pci_save_state(pdev); -- cgit v1.1 From 4f2aa89cd263932d61f286307771996df76bf63e Mon Sep 17 00:00:00 2001 From: Ajit Khaparde Date: Fri, 6 Nov 2009 02:07:32 +0000 Subject: be2net: Bug fix to send config commands to hardware after netdev_register Sending config commands to be2 hardware before netdev_register is completed, is sometimes causing the async link notification to arrive even before the driver is ready to handle it. The commands for vlan config and flow control settings can infact wait till be_open. This patch takes care of that. Signed-off-by: Ajit Khaparde Signed-off-by: David S. Miller --- drivers/net/benet/be_main.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c index 4a7a452..876b357 100644 --- a/drivers/net/benet/be_main.c +++ b/drivers/net/benet/be_main.c @@ -1610,11 +1610,21 @@ static int be_open(struct net_device *netdev) status = be_cmd_link_status_query(adapter, &link_up); if (status) - return status; + goto ret_sts; be_link_status_update(adapter, link_up); + status = be_vid_config(adapter); + if (status) + goto ret_sts; + + status = be_cmd_set_flow_control(adapter, + adapter->tx_fc, adapter->rx_fc); + if (status) + goto ret_sts; + schedule_delayed_work(&adapter->work, msecs_to_jiffies(100)); - return 0; +ret_sts: + return status; } static int be_setup(struct be_adapter *adapter) @@ -1648,18 +1658,8 @@ static int be_setup(struct be_adapter *adapter) if (status != 0) goto rx_qs_destroy; - status = be_vid_config(adapter); - if (status != 0) - goto mccqs_destroy; - - status = be_cmd_set_flow_control(adapter, - adapter->tx_fc, adapter->rx_fc); - if (status != 0) - goto mccqs_destroy; return 0; -mccqs_destroy: - be_mcc_queues_destroy(adapter); rx_qs_destroy: be_rx_queues_destroy(adapter); tx_qs_destroy: -- cgit v1.1 From 2b2072e902848a63168570f500a5726744b3873a Mon Sep 17 00:00:00 2001 From: Sebastian Haas Date: Wed, 4 Nov 2009 05:48:33 +0000 Subject: ems_usb: Fix byte order issues on big endian machines CPC-USB is using a ARM7 core with little endian byte order. The "id" field in can_msg needs byte order conversion from/to CPU byte order. Signed-off-by: Sebastian Haas Signed-off-by: David S. Miller --- drivers/net/can/usb/ems_usb.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c index 9012e0a..abdbd9c 100644 --- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -319,7 +319,7 @@ static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg) cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame)); - cf->can_id = msg->msg.can_msg.id; + cf->can_id = le32_to_cpu(msg->msg.can_msg.id); cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8); if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME @@ -813,6 +813,9 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc; } + /* Respect byte order */ + msg->msg.can_msg.id = cpu_to_le32(msg->msg.can_msg.id); + for (i = 0; i < MAX_TX_URBS; i++) { if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) { context = &dev->tx_contexts[i]; -- cgit v1.1 From 87d75b52414a22c54cf8382bcdd329376b1bce78 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 5 Nov 2009 23:14:29 +0000 Subject: NET: cassini, fix lock imbalance Stanse found that one error path in cas_open omits to unlock pm_mutex. Fix that. Signed-off-by: Jiri Slaby Signed-off-by: David S. Miller --- drivers/net/cassini.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c index 05916aa..f857afe 100644 --- a/drivers/net/cassini.c +++ b/drivers/net/cassini.c @@ -4342,11 +4342,11 @@ static int cas_open(struct net_device *dev) cas_unlock_all_restore(cp, flags); } + err = -ENOMEM; if (cas_tx_tiny_alloc(cp) < 0) - return -ENOMEM; + goto err_unlock; /* alloc rx descriptors */ - err = -ENOMEM; if (cas_alloc_rxds(cp) < 0) goto err_tx_tiny; @@ -4386,6 +4386,7 @@ err_spare: cas_free_rxds(cp); err_tx_tiny: cas_tx_tiny_free(cp); +err_unlock: mutex_unlock(&cp->pm_mutex); return err; } -- cgit v1.1 From dcaa6a9414cdc767c0afba4705c25ae9cf6096b5 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Tue, 3 Nov 2009 03:42:40 +0000 Subject: macsonic: fix crash on PowerBook 520 No-one seems to know where the PowerBook 500 series store their ethernet MAC addresses. So, rather than crash, use a MAC address from the SONIC CAM. Failing that, generate a random one. Signed-off-by: Finn Thain Signed-off-by: David S. Miller --- drivers/net/macsonic.c | 117 +++++++++++++++++++++++++------------------------ 1 file changed, 60 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c index 61eabca..b3d7d8d 100644 --- a/drivers/net/macsonic.c +++ b/drivers/net/macsonic.c @@ -223,69 +223,73 @@ static int __devinit macsonic_init(struct net_device *dev) return 0; } -static int __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) +#define INVALID_MAC(mac) (memcmp(mac, "\x08\x00\x07", 3) && \ + memcmp(mac, "\x00\xA0\x40", 3) && \ + memcmp(mac, "\x00\x80\x19", 3) && \ + memcmp(mac, "\x00\x05\x02", 3)) + +static void __devinit mac_onboard_sonic_ethernet_addr(struct net_device *dev) { struct sonic_local *lp = netdev_priv(dev); const int prom_addr = ONBOARD_SONIC_PROM_BASE; - int i; + unsigned short val; - /* On NuBus boards we can sometimes look in the ROM resources. - No such luck for comm-slot/onboard. */ - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SONIC_READ_PROM(i); + /* + * On NuBus boards we can sometimes look in the ROM resources. + * No such luck for comm-slot/onboard. + * On the PowerBook 520, the PROM base address is a mystery. + */ + if (hwreg_present((void *)prom_addr)) { + int i; + + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SONIC_READ_PROM(i); + if (!INVALID_MAC(dev->dev_addr)) + return; - /* Most of the time, the address is bit-reversed. The NetBSD - source has a rather long and detailed historical account of - why this is so. */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) + /* + * Most of the time, the address is bit-reversed. The NetBSD + * source has a rather long and detailed historical account of + * why this is so. + */ bit_reverse_addr(dev->dev_addr); - else - return 0; - - /* If we still have what seems to be a bogus address, we'll - look in the CAM. The top entry should be ours. */ - /* Danger! This only works if MacOS has already initialized - the card... */ - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { - unsigned short val; - - printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n"); - - SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); - SONIC_WRITE(SONIC_CEP, 15); - - val = SONIC_READ(SONIC_CAP2); - dev->dev_addr[5] = val >> 8; - dev->dev_addr[4] = val & 0xff; - val = SONIC_READ(SONIC_CAP1); - dev->dev_addr[3] = val >> 8; - dev->dev_addr[2] = val & 0xff; - val = SONIC_READ(SONIC_CAP0); - dev->dev_addr[1] = val >> 8; - dev->dev_addr[0] = val & 0xff; - - printk(KERN_INFO "HW Address from CAM 15: %pM\n", - dev->dev_addr); - } else return 0; - - if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) && - memcmp(dev->dev_addr, "\x00\xA0\x40", 3) && - memcmp(dev->dev_addr, "\x00\x80\x19", 3) && - memcmp(dev->dev_addr, "\x00\x05\x02", 3)) - { + if (!INVALID_MAC(dev->dev_addr)) + return; + /* - * Still nonsense ... messed up someplace! + * If we still have what seems to be a bogus address, we'll + * look in the CAM. The top entry should be ours. */ - printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n"); - return -EIO; - } else return 0; + printk(KERN_WARNING "macsonic: MAC address in PROM seems " + "to be invalid, trying CAM\n"); + } else { + printk(KERN_WARNING "macsonic: cannot read MAC address from " + "PROM, trying CAM\n"); + } + + /* This only works if MacOS has already initialized the card. */ + + SONIC_WRITE(SONIC_CMD, SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP, 15); + + val = SONIC_READ(SONIC_CAP2); + dev->dev_addr[5] = val >> 8; + dev->dev_addr[4] = val & 0xff; + val = SONIC_READ(SONIC_CAP1); + dev->dev_addr[3] = val >> 8; + dev->dev_addr[2] = val & 0xff; + val = SONIC_READ(SONIC_CAP0); + dev->dev_addr[1] = val >> 8; + dev->dev_addr[0] = val & 0xff; + + if (!INVALID_MAC(dev->dev_addr)) + return; + + /* Still nonsense ... messed up someplace! */ + + printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 " + "seems invalid, will use a random MAC\n"); + random_ether_addr(dev->dev_addr); } static int __devinit mac_onboard_sonic_probe(struct net_device *dev) @@ -402,8 +406,7 @@ static int __devinit mac_onboard_sonic_probe(struct net_device *dev) SONIC_WRITE(SONIC_ISR, 0x7fff); /* Now look for the MAC address. */ - if (mac_onboard_sonic_ethernet_addr(dev) != 0) - return -ENODEV; + mac_onboard_sonic_ethernet_addr(dev); /* Shared init code */ return macsonic_init(dev); -- cgit v1.1 From b352e40da8977253f49850a24f6448653a459ac0 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:55:38 +0000 Subject: ixgbe: Fix gso_max_size for 82599 when DCB is enabled The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index cbb143c..26fc1df 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -2471,7 +2471,10 @@ static void ixgbe_configure(struct ixgbe_adapter *adapter) ixgbe_restore_vlan(adapter); #ifdef CONFIG_IXGBE_DCB if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { - netif_set_gso_max_size(netdev, 32768); + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(netdev, 32768); + else + netif_set_gso_max_size(netdev, 65536); ixgbe_configure_dcb(adapter); } else { netif_set_gso_max_size(netdev, 65536); -- cgit v1.1 From 26f23d82dd8eae6dcc2ab99c04a9256089576a73 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 6 Nov 2009 12:56:00 +0000 Subject: ixgbe: Fix checking TFCS register for TXOFF status when DCB is enabled When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: Yi Zou Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 52 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 51 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 26fc1df..2d0f618 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -226,6 +226,56 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter, /* tx_buffer_info must be completely set up in the transmit path */ } +/** + * ixgbe_tx_is_paused - check if the tx ring is paused + * @adapter: the ixgbe adapter + * @tx_ring: the corresponding tx_ring + * + * If not in DCB mode, checks TFCS.TXOFF, otherwise, find out the + * corresponding TC of this tx_ring when checking TFCS. + * + * Returns : true if paused + */ +static inline bool ixgbe_tx_is_paused(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + int tc; + u32 txoff = IXGBE_TFCS_TXOFF; + +#ifdef CONFIG_IXGBE_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + int reg_idx = tx_ring->reg_idx; + int dcb_i = adapter->ring_feature[RING_F_DCB].indices; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + tc = reg_idx >> 2; + txoff = IXGBE_TFCS_TXOFF0; + } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + tc = 0; + txoff = IXGBE_TFCS_TXOFF; + if (dcb_i == 8) { + /* TC0, TC1 */ + tc = reg_idx >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 64) >> 4; + else if (tc == 3) /* TC4, TC5, TC6, TC7 */ + tc += 1 + ((reg_idx - 96) >> 3); + } else if (dcb_i == 4) { + /* TC0, TC1 */ + tc = reg_idx >> 6; + if (tc == 1) { + tc += (reg_idx - 64) >> 5; + if (tc == 2) /* TC2, TC3 */ + tc += (reg_idx - 96) >> 4; + } + } + } + txoff <<= tc; + } +#endif + return IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & txoff; +} + static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, struct ixgbe_ring *tx_ring, unsigned int eop) @@ -237,7 +287,7 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter, adapter->detect_tx_hung = false; if (tx_ring->tx_buffer_info[eop].time_stamp && time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) && - !(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) { + !ixgbe_tx_is_paused(adapter, tx_ring)) { /* detected Tx unit hang */ union ixgbe_adv_tx_desc *tx_desc; tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop); -- cgit v1.1 From ee5f784a2d48cdacf561e99b2d01b23364189474 Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Fri, 6 Nov 2009 12:56:20 +0000 Subject: ixgbe: fix traffic hangs on Tx with ioatdma loaded When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: Don Skidmore Acked-by: Peter P Waskiewicz Jr Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ixgbe/ixgbe_main.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2d0f618..5bd9e6b 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -44,6 +44,7 @@ #include "ixgbe.h" #include "ixgbe_common.h" +#include "ixgbe_dcb_82599.h" char ixgbe_driver_name[] = "ixgbe"; static const char ixgbe_driver_string[] = @@ -462,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, u32 txctrl; int cpu = get_cpu(); int q = tx_ring - adapter->tx_ring; + struct ixgbe_hw *hw = &adapter->hw; if (tx_ring->cpu != cpu) { - txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q)); if (adapter->hw.mac.type == ixgbe_mac_82598EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl); } else if (adapter->hw.mac.type == ixgbe_mac_82599EB) { + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q)); txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) << - IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl); } - txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; - IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl); tx_ring->cpu = cpu; } put_cpu(); @@ -1963,11 +1968,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) break; } } + if (hw->mac.type == ixgbe_mac_82599EB) { + u32 rttdcs; + + /* disable the arbiter while setting MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + /* We enable 8 traffic classes, DCB only */ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ)); + else + IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB); + + /* re-eable the arbiter */ + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); } } -- cgit v1.1 From 60fa6c374e7efcbed04bc6d11d3b35645c523b2f Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:57 +0000 Subject: qlge: Fix early exit from mbox cmd complete wait. This line was accidentally left out of the previous commit # da03945140a035a2962f7f93e359085596f20499 ("qlge: Fix firmware mailbox command timeout."). Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_mpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c index bcf13c9..aec05f2 100644 --- a/drivers/net/qlge/qlge_mpi.c +++ b/drivers/net/qlge/qlge_mpi.c @@ -499,7 +499,7 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp) /* Wait for the interrupt to come in. */ status = ql_wait_mbx_cmd_cmplt(qdev); if (status) - goto end; + continue; /* Process the event. If it's an AEN, it * will be handled in-line or a worker -- cgit v1.1 From 73475339005dc68eb0bd2f6b1e93a3a39b628410 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Fri, 6 Nov 2009 07:44:58 +0000 Subject: qlge: Set PCIe reset type for EEH to fundamental. This device requires a fundamental reset when recovering from EEH. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qlge/qlge_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c index cea7531..a2fc70a 100644 --- a/drivers/net/qlge/qlge_main.c +++ b/drivers/net/qlge/qlge_main.c @@ -3916,6 +3916,8 @@ static int __devinit ql_init_device(struct pci_dev *pdev, goto err_out; } + /* Set PCIe reset type for EEH to fundamental. */ + pdev->needs_freset = 1; pci_save_state(pdev); qdev->reg_base = ioremap_nocache(pci_resource_start(pdev, 1), -- cgit v1.1 From cc05368c52fed7d9efa0f56c5270e95bb569713e Mon Sep 17 00:00:00 2001 From: Martin Michlmayr Date: Fri, 6 Nov 2009 14:52:34 +0000 Subject: hisax: remove bad udelay call to fix build error on ARM The hisax ISDN driver fails to build on ARM with CONFIG_HISAX_ELSA: | drivers/built-in.o: In function `modem_set_dial': | drivers/isdn/hisax/elsa_ser.c:535: undefined reference to `__bad_udelay' | drivers/isdn/hisax/elsa_ser.c:544: undefined reference to `__bad_udelay' | drivers/built-in.o: In function `modem_set_init': | drivers/isdn/hisax/elsa_ser.c:486: undefined reference to `__bad_udelay' | [...] According to the comment in arch/arm/include/asm/delay.h, __bad_udelay is specifically designed on ARM to produce a build failure when udelay is called with a value > 2000. Signed-off-by: Martin Michlmayr Signed-off-by: David S. Miller --- drivers/isdn/hisax/elsa_ser.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/hisax/elsa_ser.c b/drivers/isdn/hisax/elsa_ser.c index f181db4..1657bba 100644 --- a/drivers/isdn/hisax/elsa_ser.c +++ b/drivers/isdn/hisax/elsa_ser.c @@ -477,62 +477,62 @@ static void modem_set_init(struct IsdnCardState *cs) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_1, strlen(MInit_1)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_2, strlen(MInit_2)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_3, strlen(MInit_3)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_4, strlen(MInit_4)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY ); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_5, strlen(MInit_5)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_6, strlen(MInit_6)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); modem_write_cmd(cs, MInit_7, strlen(MInit_7)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void modem_set_dial(struct IsdnCardState *cs, int outgoing) { int timeout; -#define RCV_DELAY 20000 +#define RCV_DELAY 20 modem_write_cmd(cs, MInit_speed28800, strlen(MInit_speed28800)); timeout = 1000; while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); if (outgoing) modem_write_cmd(cs, MInit_dialout, strlen(MInit_dialout)); else @@ -541,7 +541,7 @@ modem_set_dial(struct IsdnCardState *cs, int outgoing) { while(timeout-- && cs->hw.elsa.transcnt) udelay(1000); debugl1(cs, "msi tout=%d", timeout); - udelay(RCV_DELAY); + mdelay(RCV_DELAY); } static void -- cgit v1.1 From 3806e94b0148350c72f9a3214274026b6ca03f49 Mon Sep 17 00:00:00 2001 From: Crane Cai Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: i2c-piix4: Modify code name SB900 to Hudson-2 Change SB900 to its formal code name Hudson-2. Signed-off-by: Crane Cai Signed-off-by: Jean Delvare --- drivers/i2c/busses/Kconfig | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 737335f..e8fe7f1 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -128,7 +128,7 @@ config I2C_PIIX4 ATI SB600 ATI SB700 ATI SB800 - AMD SB900 + AMD Hudson-2 Serverworks OSB4 Serverworks CSB5 Serverworks CSB6 diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index d26a972..1e245e9 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -22,7 +22,7 @@ Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700, SB800 - AMD SB900 + AMD Hudson-2 SMSC Victory66 Note: we assume there can only be one device, with one SMBus interface. @@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, unsigned short smba_idx = 0xcd6; u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; - /* SB800 SMBus does not support forcing address */ + /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { - dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support " + dev_err(&PIIX4_dev->dev, "SMBus does not support " "forcing address!\n"); return -EINVAL; } @@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, - { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, -- cgit v1.1 From afa08974fe80c198b8650f73ed8ab59135ca10d0 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 7 Nov 2009 13:10:46 +0100 Subject: i2c: Add an interface to lock/unlock an I2C bus segment Some drivers need to be able to prevent access to an I2C bus segment for a specific period of time. Add an interface for them to do so without twiddling with i2c-core internals. Signed-off-by: Jean Delvare Acked-by: Ben Hutchings --- drivers/net/sfc/sfe4001.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index cee00ad..49eb91b 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx) efx_oword_t reg; /* GPIO 3 and the GPIO register are shared with I2C, so block that */ - mutex_lock(&efx->i2c_adap.bus_lock); + i2c_lock_adapter(&efx->i2c_adap); /* Pull RST_N (GPIO 2) low then let it up again, setting the * FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the @@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx) falcon_write(efx, ®, GPIO_CTL_REG_KER); msleep(1); - mutex_unlock(&efx->i2c_adap.bus_lock); + i2c_unlock_adapter(&efx->i2c_adap); ssleep(1); return 0; -- cgit v1.1 From 2b5d9946bc6bfdfa489f099eb59bcc15f8ae5afa Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 19:11:34 -0300 Subject: V4L/DVB (13048): dib0070: fix build dependency when driver is disabled Fix build dependency on function, dib0070_ctrl_agc_filter [mchehab@redhat.com: reverted the quick workaround 3f48258e50ef4] Signed-off-by: Michael Krufky Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/Kconfig | 2 +- drivers/media/dvb/frontends/dib0070.h | 7 ++++++- 2 files changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 9744b06..0e4b97f 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -75,7 +75,7 @@ config DVB_USB_DIB0700 select DVB_DIB3000MC if !DVB_FE_CUSTOMISE select DVB_S5H1411 if !DVB_FE_CUSTOMISE select DVB_LGDT3305 if !DVB_FE_CUSTOMISE - select DVB_TUNER_DIB0070 + select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 8a2e1e7..eec9e52 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -51,6 +51,7 @@ struct dib0070_config { #if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); extern u16 dib0070_wbd_offset(struct dvb_frontend *); +extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #else static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg) { @@ -63,7 +64,11 @@ static inline u16 dib0070_wbd_offset(struct dvb_frontend *fe) printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); return -ENODEV; } + +static inline void dib0070_ctrl_agc_filter(struct dvb_frontend *fe, u8 open) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} #endif -extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, u8 open); #endif -- cgit v1.1 From 1e13c8f0c97c883287b1940719d0040fd38fcd58 Mon Sep 17 00:00:00 2001 From: Patrick Boettcher Date: Sat, 19 Sep 2009 05:24:40 -0300 Subject: V4L/DVB (13050): DIB0700: fix-up USB device ID for Terratec/Leadtek git commit db48138f6bc4d2b613b08731ffc8b319432ebc25 changed by accident the assignment of certain USB IDs to their device-specific-handlers. Thanks to Edward Sheldrake for finding this regression Signed-off-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/dib0700_devices.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 0b2812a..6bd8951 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -1925,7 +1925,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", - { &dib0700_usb_id_table[8] }, + { &dib0700_usb_id_table[8], &dib0700_usb_id_table[34] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", @@ -2064,7 +2064,7 @@ struct dvb_usb_device_properties dib0700_devices[] = { }, }, - .num_device_descs = 12, + .num_device_descs = 11, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[15], NULL }, @@ -2098,11 +2098,6 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[30], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS/ T3", - { &dib0700_usb_id_table[33], - &dib0700_usb_id_table[52], NULL }, - { NULL }, - }, { "Elgato EyeTV DTT", { &dib0700_usb_id_table[49], NULL }, { NULL }, @@ -2343,8 +2338,10 @@ struct dvb_usb_device_properties dib0700_devices[] = { { &dib0700_usb_id_table[59], NULL }, { NULL }, }, - { "Terratec Cinergy T USB XXS (HD)", - { &dib0700_usb_id_table[34], &dib0700_usb_id_table[60] }, + { "Terratec Cinergy T USB XXS (HD)/ T3", + { &dib0700_usb_id_table[33], + &dib0700_usb_id_table[52], + &dib0700_usb_id_table[60], NULL}, { NULL }, }, }, -- cgit v1.1 From 7646b9de26c54cf4bc9c446d7ada9f91ece31e0a Mon Sep 17 00:00:00 2001 From: Martin Samek Date: Wed, 30 Sep 2009 22:59:09 -0300 Subject: V4L/DVB (13079): dib0700: fixed xc2028 firmware loading kernel oops Fixing kernel oops when driver attemps to load xc2028 firmware. Note by djh: the patch contribute by Martin is a port of a fix I made during the PCTV 340e development. It's a temporary workaround that fixes a regression (an OOPS condition) and the real fix should be in the code that manages the i2c master on the dib7000p. But this fix does address the immmediate regression and should be merged upstream until we do a cleaner fix. Signed-off-by: Martin Samek Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/dib7000p.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c index 55ef6ee..0781f94 100644 --- a/drivers/media/dvb/frontends/dib7000p.c +++ b/drivers/media/dvb/frontends/dib7000p.c @@ -1375,6 +1375,11 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, if (dib7000p_identify(st) != 0) goto error; + /* FIXME: make sure the dev.parent field is initialized, or else + request_firmware() will hit an OOPS (this should be moved somewhere + more common) */ + st->i2c_master.gated_tuner_i2c_adap.dev.parent = i2c_adap->dev.parent; + dibx000_init_i2c_master(&st->i2c_master, DIB7000P, st->i2c_adap, st->i2c_addr); dib7000p_demod_reset(st); -- cgit v1.1 From 4d8317876d5f53ef792e90f89d8f162d7bca5c81 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 27 Sep 2009 14:05:12 -0300 Subject: V4L/DVB (13107): tda18271: fix overflow in FM radio frequency calculation Multiplication by 62500 causes an overflow in the 32 bit freq variable, which is later divided by 1000 when using FM radio. This patch prevents the overflow by scaling the frequency value correctly upfront. Thanks to Henk Vergonet for spotting the problem and providing a preliminary patch, which this changeset was based upon. Cc: Henk Vergonet Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-fe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 6459511..cccaf16 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -1000,12 +1000,12 @@ static int tda18271_set_analog_params(struct dvb_frontend *fe, struct tda18271_std_map_item *map; char *mode; int ret; - u32 freq = params->frequency * 62500; + u32 freq = params->frequency * 125 * + ((params->mode == V4L2_TUNER_RADIO) ? 1 : 1000) / 2; priv->mode = TDA18271_ANALOG; if (params->mode == V4L2_TUNER_RADIO) { - freq = freq / 1000; map = &std_map->fm_radio; mode = "fm"; } else if (params->std & V4L2_STD_MN) { -- cgit v1.1 From a57c1dcb93e43357ed3f666e5a2b5d5071dd3930 Mon Sep 17 00:00:00 2001 From: Seth Barry Date: Sun, 27 Sep 2009 16:42:29 -0300 Subject: V4L/DVB (13109): tda18271: fix signedness issue in tda18271_rf_tracking_filters_init While having tda18271 module set with debug=17 (cal & info prints) and cal=0 (delay calibration process until first use) - I discovered that during the calibration process, if the frequency test for 69750000 returned a bcal of 0 (see tda18721-fe.c in tda18271_powerscan func) that the tuner wouldn't be able to pickup any of the frequencies in the range (all the other frequencies bands returned bcal=1). I spent some time going over the code and the NXP's tda18271 spec (ver.4 of it i think) and adding a lot of debug prints and walking/stepping through the calibration process. I found that when the powerscan fails to find a frequency, the rf calibration is not run and the default value is supposed to be used in its place (pulled from the RF_CAL_map table) - but something was getting goofed up there. Now, my c coding skills are very rusty, but i think root of the problem is a signedness issue with the math operation for calculating the rf_a1 and rf_a2 values in tda18271_rf_tracking_filters_init func, which results in values like 20648 for rf_a1 (when it should probably have a value like 0, or so slightly negative that it should be zero - this bad value for rf_a1 would in turn makes the approx calc within tda18271c2_rf_tracking_filters_correction go out of whack). The simplest solution i found was to explicitly convert the signedness of the denominator to avoid the implicit conversion. The values placed into the u32 rf_freq array should never exceed about 900mhz, so i think the s32 max value shouldn't be an issue in this case. I've tested it out a little, and even when i get a bcal=0 with the modified code, the default calibration value gets used, rf_a1 is zero, and the tuner seems to lock on the stream and mythtv seems to play it fine. Signed-off-by: Seth Barry Signed-off-by: Michael Krufky CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18271-fe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index cccaf16..3a50ce9 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -616,13 +616,13 @@ static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq) case RF2: map[i].rf_a1 = (prog_cal[RF2] - prog_tab[RF2] - prog_cal[RF1] + prog_tab[RF1]) / - ((rf_freq[RF2] - rf_freq[RF1]) / 1000); + (s32)((rf_freq[RF2] - rf_freq[RF1]) / 1000); map[i].rf2 = rf_freq[RF2] / 1000; break; case RF3: map[i].rf_a2 = (prog_cal[RF3] - prog_tab[RF3] - prog_cal[RF2] + prog_tab[RF2]) / - ((rf_freq[RF3] - rf_freq[RF2]) / 1000); + (s32)((rf_freq[RF3] - rf_freq[RF2]) / 1000); map[i].rf_b2 = prog_cal[RF2] - prog_tab[RF2]; map[i].rf3 = rf_freq[RF3] / 1000; break; -- cgit v1.1 From 1381dfd5150cfbdb5fa55ce7ab5ab56812111909 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 4 Oct 2009 14:04:47 -0300 Subject: V4L/DVB (13122): gscpa - stv06xx + ov518: dont discard every other frame When we call gspca_frame_add, it returns a pointer to the frame passed in, unless we call it with LAST_PACKET, when it will return a pointer to a new frame in which to store the frame data for the next frame. The frame pointer was not updated in stv06xx and ov518. Signed-off-by: Hans de Goede Signed-off-by: Jean-Francois Moine Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/ov519.c | 2 +- drivers/media/video/gspca/stv06xx/stv06xx.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c index 2f6e135..a5c190e 100644 --- a/drivers/media/video/gspca/ov519.c +++ b/drivers/media/video/gspca/ov519.c @@ -2919,7 +2919,7 @@ static void ov518_pkt_scan(struct gspca_dev *gspca_dev, /* A false positive here is likely, until OVT gives me * the definitive SOF/EOF format */ if ((!(data[0] | data[1] | data[2] | data[3] | data[5])) && data[6]) { - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); gspca_frame_add(gspca_dev, FIRST_PACKET, frame, data, 0); sd->packet_nr = 0; } diff --git a/drivers/media/video/gspca/stv06xx/stv06xx.c b/drivers/media/video/gspca/stv06xx/stv06xx.c index 65489d6..bfae63f 100644 --- a/drivers/media/video/gspca/stv06xx/stv06xx.c +++ b/drivers/media/video/gspca/stv06xx/stv06xx.c @@ -394,7 +394,8 @@ frame_data: PDEBUG(D_PACK, "End of frame detected"); /* Complete the last frame (if any) */ - gspca_frame_add(gspca_dev, LAST_PACKET, frame, data, 0); + frame = gspca_frame_add(gspca_dev, LAST_PACKET, + frame, data, 0); if (chunk_len) PDEBUG(D_ERR, "Chunk length is " -- cgit v1.1 From 8cf1fec877c102beeae1e13624b1f7d20abbf8f9 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:51:47 -0300 Subject: V4L/DVB (13129): sh_mobile_ceu_camera: fix cropping for scaling clients Fix a bug in cropping calculation, when the client is also scaling the image. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/sh_mobile_ceu_camera.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 65ac474..2f78b4f 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -1173,8 +1173,8 @@ static int get_scales(struct soc_camera_device *icd, width_in = scale_up(cam->ceu_rect.width, *scale_h); height_in = scale_up(cam->ceu_rect.height, *scale_v); - *scale_h = calc_generic_scale(cam->ceu_rect.width, icd->user_width); - *scale_v = calc_generic_scale(cam->ceu_rect.height, icd->user_height); + *scale_h = calc_generic_scale(width_in, icd->user_width); + *scale_v = calc_generic_scale(height_in, icd->user_height); return 0; } -- cgit v1.1 From 07bc46e6671b4533a5e56607ddec9de9079c1844 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:34 -0300 Subject: V4L/DVB (13131): pxa_camera: fix camera pixel format configuration A missed conversion prevents correct pixel format negotiation with client drivers. Reported-by: Antonio Ospite Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 6952e96..aa831d5 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1432,7 +1432,9 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, icd->sense = &sense; cam_f.fmt.pix.pixelformat = cam_fmt->fourcc; - ret = v4l2_subdev_call(sd, video, s_fmt, f); + ret = v4l2_subdev_call(sd, video, s_fmt, &cam_f); + cam_f.fmt.pix.pixelformat = pix->pixelformat; + *pix = cam_f.fmt.pix; icd->sense = NULL; -- cgit v1.1 From 76823b791d867c2ab563c237f188d0cbb4ced6e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Oct 2009 12:54:54 -0300 Subject: V4L/DVB (13132): fix use-after-free Oops, resulting from a driver-core API change Commit b4028437876866aba4747a655ede00f892089e14 has broken again re-use of device objects across device_register() / device_unregister() cycles. Fix soc-camera by nullifying the struct after device_unregister(). Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/soc_camera.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index 59aa7a3..36e617bd 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1160,13 +1160,15 @@ void soc_camera_host_unregister(struct soc_camera_host *ici) if (icd->iface == ici->nr) { /* The bus->remove will be called */ device_unregister(&icd->dev); - /* Not before device_unregister(), .remove - * needs parent to call ici->ops->remove() */ - icd->dev.parent = NULL; - - /* If the host module is loaded again, device_register() - * would complain "already initialised" */ - memset(&icd->dev.kobj, 0, sizeof(icd->dev.kobj)); + /* + * Not before device_unregister(), .remove + * needs parent to call ici->ops->remove(). + * If the host module is loaded again, device_register() + * would complain "already initialised," since 2.6.32 + * this is also needed to prevent use-after-free of the + * device private data. + */ + memset(&icd->dev, 0, sizeof(icd->dev)); } } -- cgit v1.1 From e0a7e8a621666f9ce1373270bae061f92a2a2b87 Mon Sep 17 00:00:00 2001 From: HIRANO Takahito Date: Sun, 20 Sep 2009 08:57:49 -0300 Subject: V4L/DVB (13167): pt1: Fix a compile error on arm The lack of #include caused a compile error on some architectures. Signed-off-by: HIRANO Takahito Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/pt1/pt1.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/dvb/pt1/pt1.c b/drivers/media/dvb/pt1/pt1.c index 81e623a..1fd8306 100644 --- a/drivers/media/dvb/pt1/pt1.c +++ b/drivers/media/dvb/pt1/pt1.c @@ -27,6 +27,7 @@ #include #include #include +#include #include "dvbdev.h" #include "dvb_demux.h" -- cgit v1.1 From 66349b4e7ab3825dbfc167a5f0309792a587adb7 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:09:08 -0300 Subject: V4L/DVB (13169): bttv: Fix potential out-of-order field processing There is a subtle interaction in the bttv driver which can result in fields being repeatedly processed out of order. This is a problem specifically when running in V4L2_FIELD_ALTERNATE mode (probably the most common case). 1. The determination of which fields are associated with which buffers happens in videobuf, before the bttv driver gets a chance to queue the corresponding DMA. Thus by the point when the DMA is queued for a given buffer, the algorithm has to do the queuing based on the buffer's already assigned field type - not based on which field is "next" in the video stream. 2. The driver normally tries to queue both the top and bottom fields at the same time (see bttv_irq_next_video()). It tries to sort out top vs bottom by looking at the field type for the next 2 available buffers and assigning them appropriately. 3. However the bttv driver *always* actually processes the top field first. There's even an interrupt set aside for specifically recognizing when the top field has been processed so that it can be marked done even while the bottom field is still being DMAed. Given all of the above, if one gets into a situation where bttv_irq_next_video() gets entered when the first available buffer has been pre-associated as a bottom field, then the function is going to process the buffers out of order. That first available buffer will be put into the bottom field slot and the buffer after that will be put into the top field slot. Problem is, since the top field is always processed first by the driver, then that second buffer (the one after the first available buffer) will be the first one to be finished. Because of the strict fifo handling of all video buffers, then that top field won't be seen by the app until after the bottom field is also processed. Worse still, the app will get back the chronologically later bottom field first, *before* the top field is received. The buffer's timestamps will even be backwards. While not fatal to most TV apps, this behavior can subtlely degrade userspace deinterlacing (probably will cause jitter). That's probably why it has gone unnoticed. But it will also cause serious problems if the app in question discards all but the latest received buffer (a latency minimizing tactic) - causing one field to only ever be displayed since the other is now always late. Unfortunately once you get into this state, you're stuck this way - because having consumed two buffers, now the next time around the "first" available buffer will again be a bottom field and the same thing happens. How can we get into this state? In a perfect world, where there's always a few free buffers queued to the driver, it should be impossible. However if something disrupts streaming, e.g. if the userspace app can't queue free buffers fast enough for a moment due perhaps to a CPU scheduling glitch, then the driver can get momentarily starved and some number of fields will be dropped. That's OK. But if an odd number of fields get dropped, then that "first" available buffer might be the bottom field and now we're stuck... This patch fixes that problem by deliberately only setting up a single field for one frame if we don't get a top field as the first available buffer. By purposely skipping the other field, then we only handle a single buffer thus bringing things back into proper sync (i.e. top field first) for the next frame. To do this we just drop the few lines in bttv_irq_next_video() that attempt to set up the second buffer when that second buffer isn't for the bottom field. This is definitely a problem in when in V4L2_FIELD_ALTERNATE mode. In the other modes this change either has no effect or doesn't harm things any further anyway. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 939d1e5..3ff84c8 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -3800,11 +3800,34 @@ bttv_irq_next_video(struct bttv *btv, struct bttv_buffer_set *set) if (!V4L2_FIELD_HAS_BOTH(item->vb.field) && (item->vb.queue.next != &btv->capture)) { item = list_entry(item->vb.queue.next, struct bttv_buffer, vb.queue); + /* Mike Isely - Only check + * and set up the bottom field in the logic + * below. Don't ever do the top field. This + * of course means that if we set up the + * bottom field in the above code that we'll + * actually skip a field. But that's OK. + * Having processed only a single buffer this + * time, then the next time around the first + * available buffer should be for a top field. + * That will then cause us here to set up a + * top then a bottom field in the normal way. + * The alternative to this understanding is + * that we set up the second available buffer + * as a top field, but that's out of order + * since this driver always processes the top + * field first - the effect will be the two + * buffers being returned in the wrong order, + * with the second buffer also being delayed + * by one field time (owing to the fifo nature + * of videobuf). Worse still, we'll be stuck + * doing fields out of order now every time + * until something else causes a field to be + * dropped. By effectively forcing a field to + * drop this way then we always get back into + * sync within a single frame time. (Out of + * order fields can screw up deinterlacing + * algorithms.) */ if (!V4L2_FIELD_HAS_BOTH(item->vb.field)) { - if (NULL == set->top && - V4L2_FIELD_TOP == item->vb.field) { - set->top = item; - } if (NULL == set->bottom && V4L2_FIELD_BOTTOM == item->vb.field) { set->bottom = item; -- cgit v1.1 From 2de26c0a4a218a351bb1970eeaddf2905b47ff13 Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Mon, 21 Sep 2009 12:42:22 -0300 Subject: V4L/DVB (13170): bttv: Fix reversed polarity error when switching video standard The bttv driver function which handles switching of the video standard (set_tvnorm() in bttv-driver.c) includes a check which can optionally also reset the cropping configuration to a default value. It is "optional" based on a comparison of the cropcap parameters of the previous vs the newly requested video standard. The comparison is being done with a memcmp(), a function which only returns a true value if the comparison actually fails. This if-statement appears to have been written to assume wrong memcmp() semantics. That is, it was re-initializing the cropping configuration only if the new video standard did NOT have different cropcap values. That doesn't make any sense. One definitely should reset things if the cropcap parameters are different - if there's any comparison to made at all. The effect of this problem was that a transition from, say, PAL to NTSC would leave in place old cropping setup that made sense for the PAL geometry but not for NTSC. If the application doesn't care about cropping it also won't try to reset the cropping configuration, resulting in an improperly cropped video frame. In the case I was testing this actually caused black video frames to be displayed. Another interesting effect of this bug is that if one does something which does NOT change the video standard and this function is run, then the cropping setup gets reset anyway - again because of the backwards comparison. It turns out that just running anything which merely opens and closes the video device node (e.g. v4l-info) will cause this to happen. One can argue that simply opening the device node and not doing anything to it should not mess with any of its state - but because of this behavior, any TV app which does such things (e.g. xawtv) probably therefore doesn't see the problem. The solution is to fix the sense of the if-statement. It's easy to see how this mistake could have been made given how memcmp() works. The patch is therefore removal of a single "!" character from the if-statement in set_tvnorm in bttv-driver.c. Signed-off-by: Mike Isely CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/bt8xx/bttv-driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 3ff84c8..a672401 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -1299,7 +1299,7 @@ set_tvnorm(struct bttv *btv, unsigned int norm) tvnorm = &bttv_tvnorms[norm]; - if (!memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, + if (memcmp(&bttv_tvnorms[btv->tvnorm].cropcap, &tvnorm->cropcap, sizeof (tvnorm->cropcap))) { bttv_crop_reset(&btv->crop[0], norm); btv->crop[1] = btv->crop[0]; /* current = default */ -- cgit v1.1 From 96fbf771d86a90ff006bc62ca4d4de6474b3de31 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Thu, 15 Oct 2009 01:14:34 -0300 Subject: V4L/DVB (13190): em28xx: fix panic that can occur when starting audio streaming Because the counters were not reset when starting up streaming, they would be reused from the previous run. This can result in cases such that when the second instance of streaming starts up, the "cnt" variable in em28xx_audio_isocirq() can end up being negative, resulting in attempting to write to memory before the start of runtime->dma_area (as well as having a negative number of bytes to copy). Signed-off-by: Devin Heitmueller CC: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/em28xx/em28xx-audio.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 7bd8a70..ac947ae 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -383,6 +383,11 @@ static int snd_em28xx_hw_capture_free(struct snd_pcm_substream *substream) static int snd_em28xx_prepare(struct snd_pcm_substream *substream) { + struct em28xx *dev = snd_pcm_substream_chip(substream); + + dev->adev.hwptr_done_capture = 0; + dev->adev.capture_transfer_done = 0; + return 0; } -- cgit v1.1 From 78c948ab0cc44f9c8ae397d7d9d217bb498bfa2f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 21 Oct 2009 18:27:29 -0300 Subject: V4L/DVB (13202): smsusb: add autodetection support for three additional Hauppauge USB IDs Add support for three new Hauppauge Device USB IDs: 2040:b900 2040:b910 2040:c000 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/siano/smsusb.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/media/dvb/siano/smsusb.c b/drivers/media/dvb/siano/smsusb.c index cb8a358..8f88a58 100644 --- a/drivers/media/dvb/siano/smsusb.c +++ b/drivers/media/dvb/siano/smsusb.c @@ -529,6 +529,12 @@ struct usb_device_id smsusb_id_table[] = { .driver_info = SMS1XXX_BOARD_SIANO_NICE }, { USB_DEVICE(0x187f, 0x0301), .driver_info = SMS1XXX_BOARD_SIANO_VENICE }, + { USB_DEVICE(0x2040, 0xb900), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xb910), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, + { USB_DEVICE(0x2040, 0xc000), + .driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM }, { } /* Terminating entry */ }; -- cgit v1.1 From 1f95725755ab67f3198df3b5bf7517f926f310ca Mon Sep 17 00:00:00 2001 From: Mike Isely Date: Wed, 23 Sep 2009 18:06:57 -0300 Subject: V4L/DVB (13230): s2255drv: Don't conditionalize video buffer completion on waiting processes The s2255 driver had logic which aborted processing of a video frame if there was no process waiting on the video buffer in question. That simply doesn't work when the application is doing things in an asynchronous manner. If the application went to the trouble to queue the buffer in the first place, then the driver should always attempt to complete it - even if the application at that moment has its attention turned elsewhere. Applications which always blocked waiting for I/O on the capture device would not have been affected by this. Applications which *mostly* blocked waiting for I/O on the capture device probably only would have been somewhat affected (frame lossage, at a rate which goes up as the application blocks less). Applications which never blocked on the capture device (e.g. polling only) however would never have been able to receive any video frames, since in that case this "is anyone waiting on this?" check on the buffer never would have evalutated true. This patch just deletes that harmful check against the buffer's wait queue. Signed-off-by: Mike Isely Signed-off-by: Mauro Carvalho Chehab CC: stable@kernel.org --- drivers/media/video/s2255drv.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/s2255drv.c b/drivers/media/video/s2255drv.c index 9e3262c..2c0bb06 100644 --- a/drivers/media/video/s2255drv.c +++ b/drivers/media/video/s2255drv.c @@ -598,11 +598,6 @@ static int s2255_got_frame(struct s2255_dev *dev, int chn, int jpgsize) buf = list_entry(dma_q->active.next, struct s2255_buffer, vb.queue); - if (!waitqueue_active(&buf->vb.done)) { - /* no one active */ - rc = -1; - goto unlock; - } list_del(&buf->vb.queue); do_gettimeofday(&buf->vb.ts); dprintk(100, "[%p/%d] wakeup\n", buf, buf->vb.i); -- cgit v1.1 From c94115ffc4d76089b26eee4d1cb56f1f6b631bd2 Mon Sep 17 00:00:00 2001 From: Henrik Kurelid Date: Sat, 3 Oct 2009 05:37:58 -0300 Subject: V4L/DVB (13237): firedtv: length field corrupt in ca2host if length>127 This solves a problem in firedtv that has become major for Swedish DVB-T users the last month or so. It will most likely solve issues seen by other users as well. If the length of an AVC message is greater than 127, the length field should be encoded in LV mode instead of V mode. V mode can only be used if the length is 127 or less. This patch ensures that the CA_PMT message is always encoded in LV mode so PMT message of greater lengths can be supported. Signed-off-by: Henrik Kurelid Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-avc.c | 38 +++++++++++++++++--------------- 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/firewire/firedtv-avc.c b/drivers/media/dvb/firewire/firedtv-avc.c index d1b67fe..485d061 100644 --- a/drivers/media/dvb/firewire/firedtv-avc.c +++ b/drivers/media/dvb/firewire/firedtv-avc.c @@ -1050,28 +1050,28 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[4] = 0; /* slot */ c->operand[5] = SFE_VENDOR_TAG_CA_PMT; /* ca tag */ c->operand[6] = 0; /* more/last */ - /* c->operand[7] = XXXprogram_info_length + 17; */ /* length */ - c->operand[8] = list_management; - c->operand[9] = 0x01; /* pmt_cmd=OK_descramble */ + /* Use three bytes for length field in case length > 127 */ + c->operand[10] = list_management; + c->operand[11] = 0x01; /* pmt_cmd=OK_descramble */ /* TS program map table */ - c->operand[10] = 0x02; /* Table id=2 */ - c->operand[11] = 0x80; /* Section syntax + length */ - /* c->operand[12] = XXXprogram_info_length + 12; */ - c->operand[13] = msg[1]; /* Program number */ - c->operand[14] = msg[2]; - c->operand[15] = 0x01; /* Version number=0 + current/next=1 */ - c->operand[16] = 0x00; /* Section number=0 */ - c->operand[17] = 0x00; /* Last section number=0 */ - c->operand[18] = 0x1f; /* PCR_PID=1FFF */ - c->operand[19] = 0xff; - c->operand[20] = (program_info_length >> 8); /* Program info length */ - c->operand[21] = (program_info_length & 0xff); + c->operand[12] = 0x02; /* Table id=2 */ + c->operand[13] = 0x80; /* Section syntax + length */ + /* c->operand[14] = XXXprogram_info_length + 12; */ + c->operand[15] = msg[1]; /* Program number */ + c->operand[16] = msg[2]; + c->operand[17] = 0x01; /* Version number=0 + current/next=1 */ + c->operand[18] = 0x00; /* Section number=0 */ + c->operand[19] = 0x00; /* Last section number=0 */ + c->operand[20] = 0x1f; /* PCR_PID=1FFF */ + c->operand[21] = 0xff; + c->operand[22] = (program_info_length >> 8); /* Program info length */ + c->operand[23] = (program_info_length & 0xff); /* CA descriptors at programme level */ read_pos = 6; - write_pos = 22; + write_pos = 24; if (program_info_length > 0) { pmt_cmd_id = msg[read_pos++]; if (pmt_cmd_id != 1 && pmt_cmd_id != 4) @@ -1113,8 +1113,10 @@ int avc_ca_pmt(struct firedtv *fdtv, char *msg, int length) c->operand[write_pos++] = 0x00; c->operand[write_pos++] = 0x00; - c->operand[7] = write_pos - 8; - c->operand[12] = write_pos - 13; + c->operand[7] = 0x82; + c->operand[8] = (write_pos - 10) >> 8; + c->operand[9] = (write_pos - 10) & 0xff; + c->operand[14] = write_pos - 15; crc32_csum = crc32_be(0, &c->operand[10], c->operand[12] - 1); c->operand[write_pos - 4] = (crc32_csum >> 24) & 0xff; -- cgit v1.1 From dcff9cfe432c74b382cea327509ede2e114b1615 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 17 Oct 2009 17:46:25 -0300 Subject: V4L/DVB (13240): firedtv: fix regression: tuning fails due to bogus error return Since 2.6.32(-rc1), DVB core checks the return value of dvb_frontend_ops.set_frontend. Now it becomes apparent that firedtv always returned a bogus value from its set_frontend method. CC: stable@kernel.org Signed-off-by: Stefan Richter Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/firewire/firedtv-fe.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/firewire/firedtv-fe.c b/drivers/media/dvb/firewire/firedtv-fe.c index 7ba4363..e49cdc8 100644 --- a/drivers/media/dvb/firewire/firedtv-fe.c +++ b/drivers/media/dvb/firewire/firedtv-fe.c @@ -141,18 +141,12 @@ static int fdtv_read_uncorrected_blocks(struct dvb_frontend *fe, u32 *ucblocks) return -EOPNOTSUPP; } -#define ACCEPTED 0x9 - static int fdtv_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *params) { struct firedtv *fdtv = fe->sec_priv; - /* FIXME: avc_tuner_dsd never returns ACCEPTED. Check status? */ - if (avc_tuner_dsd(fdtv, params) != ACCEPTED) - return -EINVAL; - else - return 0; /* not sure of this... */ + return avc_tuner_dsd(fdtv, params); } static int fdtv_get_frontend(struct dvb_frontend *fe, -- cgit v1.1 From b6ef8836c1ff5199abd40cfba162052bc7e8af00 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:11:43 -0300 Subject: V4L/DVB (13255): gspca - m5602-s5k4aa: Add vflip quirk for the Bruneinit laptop MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Bruneinit laptop. Thanks to Jörg for the report Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index 59400e8..f580b61 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -35,6 +35,13 @@ static const struct dmi_system_id s5k4aa_vflip_dmi_table[] = { { + .ident = "BRUNEINIT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "BRUNENIT"), + DMI_MATCH(DMI_PRODUCT_NAME, "BRUNENIT"), + DMI_MATCH(DMI_BOARD_VERSION, "00030D0000000001") + } + }, { .ident = "Fujitsu-Siemens Amilo Xa 2528", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), -- cgit v1.1 From 2339a1887dab469bb4bae56aa7eca3a5e05ecde7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sun, 27 Sep 2009 10:20:21 -0300 Subject: V4L/DVB (13256): gspca - m5602-s5k4aa: Add another MSI GX700 vflip quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds another vflip quirk for the MSI GX700. Thanks to John Katzmaier for reporting. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index f580b61..ef4ae68 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -64,6 +64,13 @@ static .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), + DMI_MATCH(DMI_BIOS_DATE, "12/02/2008") + } + }, { + .ident = "MSI GX700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"), + DMI_MATCH(DMI_PRODUCT_NAME, "GX700"), DMI_MATCH(DMI_BIOS_DATE, "07/26/2007") } }, { -- cgit v1.1 From 81191f694cb507c49d3c7aa6238dcc0a83ad4001 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Erik=20Andr=C3=A9n?= Date: Sat, 3 Oct 2009 10:01:41 -0300 Subject: V4L/DVB (13257): gspca - m5602-s5k4aa: Add vflip for Fujitsu Amilo Xi 2528 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adds a vflip quirk for the Fujitsu Amilo Xi 2528. Thanks to Evgeny for the report. Signed-off-by: Erik Andrén Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/m5602/m5602_s5k4aa.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c index ef4ae68..a27afeb 100644 --- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c +++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c @@ -48,6 +48,12 @@ static DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xa 2528") } }, { + .ident = "Fujitsu-Siemens Amilo Xi 2528", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 2528") + } + }, { .ident = "Fujitsu-Siemens Amilo Xi 2550", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), -- cgit v1.1 From 32345b059676169444d8d3c4a59009adcdf93885 Mon Sep 17 00:00:00 2001 From: Theodore Kilgore Date: Sun, 1 Nov 2009 12:59:42 -0300 Subject: V4L/DVB (13264): gspca_mr97310a: Change vstart for CIF sensor type 1 cams gspca_mr97310a: Change vstart for CIF sensor type 1 cams This fixes the distortion at the end of the frame, and avoids the bad frame dropping done because of this distortion, trippling the framerate! Signed-off-by: Theodore Kilgore Signed-off-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/mr97310a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c index 140c8f3..f8328b9 100644 --- a/drivers/media/video/gspca/mr97310a.c +++ b/drivers/media/video/gspca/mr97310a.c @@ -483,7 +483,7 @@ static int start_cif_cam(struct gspca_dev *gspca_dev) data[3] = 0x2c; /* reg 2, H size/8 */ data[4] = 0x48; /* reg 3, V size/4 */ data[6] = 0x06; /* reg 5, H start */ - data[8] = 0x06 + sd->sensor_type; /* reg 7, V start */ + data[8] = 0x06 - sd->sensor_type; /* reg 7, V start */ break; } err_code = mr_write(gspca_dev, 11); -- cgit v1.1 From d514edac5df2149207f1ae2f52de63882c692eec Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 4 Nov 2009 14:18:04 -0300 Subject: V4L/DVB (13286): pxa-camera: Fix missing sched.h Required for wakeup call. Signed-off-by: Jonathan Cameron Acked-by: Guennadi Liakhovetski Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/pxa_camera.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index aa831d5..51b683c 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include -- cgit v1.1 From 7157fbd0ed1a00024fb915cfa5ed93fb4ce9dfaf Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 4 Nov 2009 15:26:59 -0300 Subject: V4L/DVB (13287): ce6230 - saa7164-cmd: Fix wrong sizeof Which is why I have always preferred sizeof(struct foo) over sizeof(var). Cc: Antti Palosaari Acked-by: Steven Toth Signed-off-by: Jean Delvare Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/ce6230.c | 2 +- drivers/media/video/saa7164/saa7164-cmd.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/dvb/dvb-usb/ce6230.c b/drivers/media/dvb/dvb-usb/ce6230.c index 0737c63..3df2045 100644 --- a/drivers/media/dvb/dvb-usb/ce6230.c +++ b/drivers/media/dvb/dvb-usb/ce6230.c @@ -105,7 +105,7 @@ static int ce6230_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int i = 0; struct req_t req; int ret = 0; - memset(&req, 0, sizeof(&req)); + memset(&req, 0, sizeof(req)); if (num > 2) return -EINVAL; diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c index c45966e..9c1d3ac 100644 --- a/drivers/media/video/saa7164/saa7164-cmd.c +++ b/drivers/media/video/saa7164/saa7164-cmd.c @@ -347,7 +347,7 @@ int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, tmComResCmd_t command, /* Prepare some basic command/response structures */ memset(&command_t, 0, sizeof(command_t)); - memset(&response_t, 0, sizeof(&response_t)); + memset(&response_t, 0, sizeof(response_t)); pcommand_t = &command_t; presponse_t = &response_t; command_t.id = id; -- cgit v1.1 From a2e35af6c756b5fa827fec5e0431cf2ce449beef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 11:09:12 -0300 Subject: V4L/DVB (13309): uvcvideo: Ignore the FIX_BANDWIDTH for compressed video The FIX_BANDWIDTH quirk tries to work around cameras requesting the maximum bandwidth regardless of the image size by computing a bandwidth estimate. This works only for uncompressed frames. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_video.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c index f960e8e..a6e41d1 100644 --- a/drivers/media/video/uvc/uvc_video.c +++ b/drivers/media/video/uvc/uvc_video.c @@ -90,7 +90,8 @@ static void uvc_fixup_video_ctrl(struct uvc_streaming *stream, ctrl->dwMaxVideoFrameSize = frame->dwMaxVideoFrameBufferSize; - if (stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) && + stream->dev->quirks & UVC_QUIRK_FIX_BANDWIDTH && stream->intf->num_altsetting > 1) { u32 interval; u32 bandwidth; -- cgit v1.1 From 2e8961330ec4b558a0f4db18ab5fb566842f492b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 4 Nov 2009 13:11:10 -0300 Subject: V4L/DVB (13311): uvcvideo: Fix compilation warning with 2.6.32 due to type mismatch with abs() The abs() macro has changed in 2.6.32 and returns a long instead of an int. Fix the driver to avoid compilation warnings. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c index c3225a5..1b89735 100644 --- a/drivers/media/video/uvc/uvc_ctrl.c +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -348,7 +348,7 @@ static void uvc_ctrl_set_zoom(struct uvc_control_mapping *mapping, __s32 value, __u8 *data) { data[0] = value == 0 ? 0 : (value > 0) ? 1 : 0xff; - data[2] = min(abs(value), 0xff); + data[2] = min((int)abs(value), 0xff); } static struct uvc_control_mapping uvc_ctrl_mappings[] = { -- cgit v1.1 From 4007a672abd88091e3cced158ec491d41c0c454c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:19:35 -0300 Subject: V4L/DVB (13313): saa7134: add support for FORCE_TS_VALID mode for mpeg ts input When FORCE_TS_VALID mode is enabled, the saa713x will accept MPEG TS input without requiring TS_VALID set high. This is required for some new boards to function properly, due to the hardware design implementation. The configuration is toggled within the board setup configuration. Boards that do not have this bit set will function as before with no change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-ts.c | 6 ++++-- drivers/media/video/saa7134/saa7134.h | 1 + 2 files changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-ts.c b/drivers/media/video/saa7134/saa7134-ts.c index 3fa6522..03488ba 100644 --- a/drivers/media/video/saa7134/saa7134-ts.c +++ b/drivers/media/video/saa7134/saa7134-ts.c @@ -262,11 +262,13 @@ int saa7134_ts_start(struct saa7134_dev *dev) switch (saa7134_boards[dev->board].ts_type) { case SAA7134_MPEG_TS_PARALLEL: saa_writeb(SAA7134_TS_SERIAL0, 0x40); - saa_writeb(SAA7134_TS_PARALLEL, 0xec); + saa_writeb(SAA7134_TS_PARALLEL, 0xec | + (saa7134_boards[dev->board].ts_force_val << 4)); break; case SAA7134_MPEG_TS_SERIAL: saa_writeb(SAA7134_TS_SERIAL0, 0xd8); - saa_writeb(SAA7134_TS_PARALLEL, 0x6c); + saa_writeb(SAA7134_TS_PARALLEL, 0x6c | + (saa7134_boards[dev->board].ts_force_val << 4)); saa_writeb(SAA7134_TS_PARALLEL_SERIAL, 0xbc); saa_writeb(SAA7134_TS_SERIAL1, 0x02); break; diff --git a/drivers/media/video/saa7134/saa7134.h b/drivers/media/video/saa7134/saa7134.h index 6ee3e9b..f8697d4 100644 --- a/drivers/media/video/saa7134/saa7134.h +++ b/drivers/media/video/saa7134/saa7134.h @@ -360,6 +360,7 @@ struct saa7134_board { enum saa7134_mpeg_type mpeg; enum saa7134_mpeg_ts_type ts_type; unsigned int vid_port_opts; + unsigned int ts_force_val:1; }; #define card_has_radio(dev) (NULL != saa7134_boards[dev->board].radio.name) -- cgit v1.1 From 22370ef5035f206283505409c9a64a595c5c7320 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 4 Nov 2009 14:23:57 -0300 Subject: V4L/DVB (13314): saa7134: set ts_force_val for the Hauppauge WinTV HVR-1150 The Hauppauge WinTV HVR-1150 retail boards require the FORCE_TS_VALID bit to be set in order to function properly. This change will work on the early revisions on the board as well, but the final revision will not function without this change. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/saa7134/saa7134-cards.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 71145bf..0901322 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -3428,6 +3428,7 @@ struct saa7134_board saa7134_boards[] = { .tuner_config = 3, .mpeg = SAA7134_MPEG_DVB, .ts_type = SAA7134_MPEG_TS_SERIAL, + .ts_force_val = 1, .gpiomask = 0x0800100, /* GPIO 21 is an INPUT */ .inputs = {{ .name = name_tv, -- cgit v1.1 From 53a0ef866dc379e577794819d0b8ade5ba338e3a Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Fri, 6 Nov 2009 23:53:13 +0000 Subject: can: fix WARN_ON dump in net/core/rtnetlink.c:rtmsg_ifinfo() On older kernels, e.g. 2.6.27, a WARN_ON dump in rtmsg_ifinfo() is thrown when the CAN device is registered due to insufficient skb space, as reported by various users. This patch adds the rtnl_link_ops "get_size" to fix the problem. I think this patch is required for more recent kernels as well, even if no WARN_ON dumps are triggered. Maybe we also need "get_xstats_size" for the CAN xstats. Signed-off-by: Wolfgang Grandegger Signed-off-by: David S. Miller --- drivers/net/can/dev.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index f0b9a1e..564e31c 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -589,6 +589,22 @@ static int can_changelink(struct net_device *dev, return 0; } +static size_t can_get_size(const struct net_device *dev) +{ + struct can_priv *priv = netdev_priv(dev); + size_t size; + + size = nla_total_size(sizeof(u32)); /* IFLA_CAN_STATE */ + size += sizeof(struct can_ctrlmode); /* IFLA_CAN_CTRLMODE */ + size += nla_total_size(sizeof(u32)); /* IFLA_CAN_RESTART_MS */ + size += sizeof(struct can_bittiming); /* IFLA_CAN_BITTIMING */ + size += sizeof(struct can_clock); /* IFLA_CAN_CLOCK */ + if (priv->bittiming_const) /* IFLA_CAN_BITTIMING_CONST */ + size += sizeof(struct can_bittiming_const); + + return size; +} + static int can_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct can_priv *priv = netdev_priv(dev); @@ -639,6 +655,7 @@ static struct rtnl_link_ops can_link_ops __read_mostly = { .setup = can_setup, .newlink = can_newlink, .changelink = can_changelink, + .get_size = can_get_size, .fill_info = can_fill_info, .fill_xstats = can_fill_xstats, }; -- cgit v1.1 From 2606289779cb297320a185db5997729d29b6700b Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 6 Nov 2009 08:50:28 +0000 Subject: net/fsl_pq_mdio: add module license GPL or it will taint the kernel and fail to load becuase of_address_to_resource() is GPL only. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: David S. Miller --- drivers/net/fsl_pq_mdio.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c index 6ac4648..efbf676 100644 --- a/drivers/net/fsl_pq_mdio.c +++ b/drivers/net/fsl_pq_mdio.c @@ -427,3 +427,4 @@ void fsl_pq_mdio_exit(void) of_unregister_platform_driver(&fsl_pq_mdio_driver); } module_exit(fsl_pq_mdio_exit); +MODULE_LICENSE("GPL"); -- cgit v1.1 From 52cb0148ef2401dbffa4daf60588cad27e4f329d Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Mon, 9 Nov 2009 23:21:19 +0000 Subject: mtd/maps: Fix accidental removal in Makefile The commit d79c326 ("gpio-addr-flash: new driver for GPIO assisted flash addressing") removed two lines from the Makefile by accident. Though I'm not sure how this accident happened, this patch reverts the removal. Signed-off-by: Atsushi Nemoto Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds --- drivers/mtd/maps/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 1d5cf86..ae2f6db 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -58,4 +58,6 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o +obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o +obj-$(CONFIG_MTD_VMU) += vmu-flash.o obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o -- cgit v1.1 From a39533b4ddad388b64a20bcabd17ac125fd4ba65 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 9 Nov 2009 16:41:21 -0500 Subject: drm/radeon/r600: CS parser updates Add some additional regs that require relocs. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/r600_cs.c | 18 ++++++++++++++++++ drivers/gpu/drm/radeon/r600d.h | 10 ++++++++++ 2 files changed, 28 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 17e4219..0d82076 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -466,6 +466,23 @@ static int r600_packet3_check(struct radeon_cs_parser *p, for (i = 0; i < pkt->count; i++) { reg = start_reg + (4 * i); switch (reg) { + case SQ_ESGS_RING_BASE: + case SQ_GSVS_RING_BASE: + case SQ_ESTMP_RING_BASE: + case SQ_GSTMP_RING_BASE: + case SQ_VSTMP_RING_BASE: + case SQ_PSTMP_RING_BASE: + case SQ_FBUF_RING_BASE: + case SQ_REDUC_RING_BASE: + case SX_MEMORY_EXPORT_BASE: + r = r600_cs_packet_next_reloc(p, &reloc); + if (r) { + DRM_ERROR("bad SET_CONFIG_REG " + "0x%04X\n", reg); + return -EINVAL; + } + ib[idx+1+i] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff); + break; case CP_COHER_BASE: /* use PACKET3_SURFACE_SYNC */ return -EINVAL; @@ -487,6 +504,7 @@ static int r600_packet3_check(struct radeon_cs_parser *p, reg = start_reg + (4 * i); switch (reg) { case DB_DEPTH_BASE: + case DB_HTILE_DATA_BASE: case CB_COLOR0_BASE: case CB_COLOR1_BASE: case CB_COLOR2_BASE: diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index cf238bf..b99f45d 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -118,6 +118,7 @@ #define DB_DEBUG 0x9830 #define PREZ_MUST_WAIT_FOR_POSTZ_DONE (1 << 31) #define DB_DEPTH_BASE 0x2800C +#define DB_HTILE_DATA_BASE 0x28014 #define DB_WATERMARKS 0x9838 #define DEPTH_FREE(x) ((x) << 0) #define DEPTH_FLUSH(x) ((x) << 5) @@ -170,6 +171,14 @@ #define SQ_STACK_RESOURCE_MGMT_2 0x8c14 # define NUM_GS_STACK_ENTRIES(x) ((x) << 0) # define NUM_ES_STACK_ENTRIES(x) ((x) << 16) +#define SQ_ESGS_RING_BASE 0x8c40 +#define SQ_GSVS_RING_BASE 0x8c48 +#define SQ_ESTMP_RING_BASE 0x8c50 +#define SQ_GSTMP_RING_BASE 0x8c58 +#define SQ_VSTMP_RING_BASE 0x8c60 +#define SQ_PSTMP_RING_BASE 0x8c68 +#define SQ_FBUF_RING_BASE 0x8c70 +#define SQ_REDUC_RING_BASE 0x8c78 #define GRBM_CNTL 0x8000 # define GRBM_READ_TIMEOUT(x) ((x) << 0) @@ -355,6 +364,7 @@ #define SX_MISC 0x28350 +#define SX_MEMORY_EXPORT_BASE 0x9010 #define SX_DEBUG_1 0x9054 #define SMX_EVENT_RELEASE (1 << 0) #define ENABLE_NEW_SMX_ADDRESS (1 << 16) -- cgit v1.1 From eeba57518c01cf462d87bbfc59049139da47adcb Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Sat, 7 Nov 2009 16:27:32 +0100 Subject: drm/kms: Init the CRTC info fields for modes forced from the command line. Fixes fdo bug 24710. Signed-off-by: Francisco Jerez Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index 1fe4e1d..bbfd110 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -331,6 +331,7 @@ create_mode: cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60, cmdline_mode->rb, cmdline_mode->interlace, cmdline_mode->margins); + drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); list_add(&mode->head, &connector->modes); return mode; } -- cgit v1.1 From 1efd374d78834a793663414402911765bcdda6eb Mon Sep 17 00:00:00 2001 From: Denis Turischev Date: Thu, 5 Nov 2009 13:32:40 +0200 Subject: [WATCHDOG] SBC-FITPC2 watchdog driver registration fix This patch fixes device registration process. Signed-off-by: Denis Turischev Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sbc_fitpc2_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c index 852ca19..91430a8 100644 --- a/drivers/watchdog/sbc_fitpc2_wdt.c +++ b/drivers/watchdog/sbc_fitpc2_wdt.c @@ -227,7 +227,7 @@ static int __init fitpc2_wdt_init(void) } err = misc_register(&fitpc2_wdt_miscdev); - if (!err) { + if (err) { pr_err("cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, err); goto err_margin; -- cgit v1.1 From 404291ac9e72d118fcadeb939a69b2caa0a0e9ca Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 11 Nov 2009 13:32:29 -0800 Subject: btusb bluetooth driver: wait for 'waker' work too before closing Rafael debugged a resume-time hang (with oopses in workqueue handling) on his laptop that was due to the 'waker' workqueue entry being disconnected and then released without the workqueue entry having been synchronized. Several people were involved, with Oleg Nesterov doing a debugging patch showing what workqueue entry was corrupt etc. This was a regression introduced by commit 7bee549e19 ("Bluetooth: Add USB autosuspend support to btusb driver") as Rafael points out (not actually bisected, but it became clear once the bug was found). Tested-and-reported-by: Rafael J. Wysocki Acked-by: Oliver Neukum Cc: Oleg Nesterov Cc: Tejun Heo Cc: Marcel Holtmann Signed-off-by: Linus Torvalds --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 7ba91aa..2fb3802 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -591,6 +591,7 @@ static int btusb_close(struct hci_dev *hdev) return 0; cancel_work_sync(&data->work); + cancel_work_sync(&data->waker); clear_bit(BTUSB_ISOC_RUNNING, &data->flags); clear_bit(BTUSB_BULK_RUNNING, &data->flags); -- cgit v1.1 From f5c15d0b37ab1cd3969b8ce7828ab41c79f36f77 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:22 -0800 Subject: fb: remove fb_save_state() and fb_restore_state operations Remove fb_save_state() and fb_restore_state operations from frame buffer layer. They are used only in two drivers: 1. savagefb - and cause bug #11248 2. uvesafb Usage of these operations is misunderstood in both drivers so kill these operations, fix the bug #11248 and avoid confusion in the future. Tested on Savage 3D/MV card and the patch fixes the bug #11248. The frame buffer layer uses these funtions during switch between graphics and text mode of the console, but these drivers saves state before switching of the frame buffer (in the fb_open) and after releasing it (in the fb_release). This defeats the purpose of these operations. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=11248 Signed-off-by: Krzysztof Helt Reported-by: Jochen Hein Tested-by: Jochen Hein Cc: Geert Uytterhoeven Cc: Michal Januszewski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atafb.c | 6 ------ drivers/video/console/fbcon.c | 5 +---- drivers/video/savage/savagefb_driver.c | 18 ------------------ drivers/video/uvesafb.c | 28 ---------------------------- 4 files changed, 1 insertion(+), 56 deletions(-) (limited to 'drivers') diff --git a/drivers/video/atafb.c b/drivers/video/atafb.c index 8cd279b..37624f7 100644 --- a/drivers/video/atafb.c +++ b/drivers/video/atafb.c @@ -329,12 +329,6 @@ extern unsigned char fontdata_8x16[]; * * * perform fb specific mmap * * int (*fb_mmap)(struct fb_info *info, struct vm_area_struct *vma); - * - * * save current hardware state * - * void (*fb_save_state)(struct fb_info *info); - * - * * restore saved state * - * void (*fb_restore_state)(struct fb_info *info); * } ; */ diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5a686ce..3681c6a 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2311,14 +2311,11 @@ static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch) ops->graphics = 1; if (!blank) { - if (info->fbops->fb_save_state) - info->fbops->fb_save_state(info); var.activate = FB_ACTIVATE_NOW | FB_ACTIVATE_FORCE; fb_set_var(info, &var); ops->graphics = 0; ops->var = info->var; - } else if (info->fbops->fb_restore_state) - info->fbops->fb_restore_state(info); + } } if (!fbcon_is_inactive(vc, info)) { diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 37b135d..0857b3b 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1606,22 +1606,6 @@ static int savagefb_blank(int blank, struct fb_info *info) return (blank == FB_BLANK_NORMAL) ? 1 : 0; } -static void savagefb_save_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savage_get_default_par(par, &par->save); -} - -static void savagefb_restore_state(struct fb_info *info) -{ - struct savagefb_par *par = info->par; - - savagefb_blank(FB_BLANK_POWERDOWN, info); - savage_set_default_par(par, &par->save); - savagefb_blank(FB_BLANK_UNBLANK, info); -} - static int savagefb_open(struct fb_info *info, int user) { struct savagefb_par *par = info->par; @@ -1667,8 +1651,6 @@ static struct fb_ops savagefb_ops = { .fb_setcolreg = savagefb_setcolreg, .fb_pan_display = savagefb_pan_display, .fb_blank = savagefb_blank, - .fb_save_state = savagefb_save_state, - .fb_restore_state = savagefb_restore_state, #if defined(CONFIG_FB_SAVAGE_ACCEL) .fb_fillrect = savagefb_fillrect, .fb_copyarea = savagefb_copyarea, diff --git a/drivers/video/uvesafb.c b/drivers/video/uvesafb.c index e35232a..54fbb29 100644 --- a/drivers/video/uvesafb.c +++ b/drivers/video/uvesafb.c @@ -1411,23 +1411,6 @@ static int uvesafb_check_var(struct fb_var_screeninfo *var, return 0; } -static void uvesafb_save_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - if (par->vbe_state_saved) - kfree(par->vbe_state_saved); - - par->vbe_state_saved = uvesafb_vbe_state_save(par); -} - -static void uvesafb_restore_state(struct fb_info *info) -{ - struct uvesafb_par *par = info->par; - - uvesafb_vbe_state_restore(par, par->vbe_state_saved); -} - static struct fb_ops uvesafb_ops = { .owner = THIS_MODULE, .fb_open = uvesafb_open, @@ -1441,8 +1424,6 @@ static struct fb_ops uvesafb_ops = { .fb_imageblit = cfb_imageblit, .fb_check_var = uvesafb_check_var, .fb_set_par = uvesafb_set_par, - .fb_save_state = uvesafb_save_state, - .fb_restore_state = uvesafb_restore_state, }; static void __devinit uvesafb_init_info(struct fb_info *info, @@ -1459,15 +1440,6 @@ static void __devinit uvesafb_init_info(struct fb_info *info, info->fix.ypanstep = par->ypan ? 1 : 0; info->fix.ywrapstep = (par->ypan > 1) ? 1 : 0; - /* - * If we were unable to get the state buffer size, disable - * functions for saving and restoring the hardware state. - */ - if (par->vbe_state_size == 0) { - info->fbops->fb_save_state = NULL; - info->fbops->fb_restore_state = NULL; - } - /* Disable blanking if the user requested so. */ if (!blank) info->fbops->fb_blank = NULL; -- cgit v1.1 From b9f9d4706cb1b706f89f98ea6ead41ebecdefbc2 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 11 Nov 2009 14:26:25 -0800 Subject: savagefb: fix blanking mode on CRT display Fix wrong bit mask for blanking register. Due to the error a CRT monitor blanks off due to wrong frequency (out of range) instead of PM signal (vertical and horizontal frequencies cut off). Just compare the mask with bits set in the switch(blank) clause below the changed line. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/savage/savagefb_driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c index 0857b3b..842d157 100644 --- a/drivers/video/savage/savagefb_driver.c +++ b/drivers/video/savage/savagefb_driver.c @@ -1565,7 +1565,7 @@ static int savagefb_blank(int blank, struct fb_info *info) vga_out8(0x3c5, sr8, par); vga_out8(0x3c4, 0x0d, par); srd = vga_in8(0x3c5, par); - srd &= 0x03; + srd &= 0x50; switch (blank) { case FB_BLANK_UNBLANK: -- cgit v1.1 From 431861cfab0c8613f83bac0f41dae22ff74f9bc1 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 11 Nov 2009 14:26:35 -0800 Subject: atmel_lcdfb: new alternate pixel clock formula at91sam9g45 non ES lots have an alternate pixel clock calculation formula. Introduce this one with condition on the cpu_is_xxxxx() macros. Newer 9g45 SOC will not have good pixel clock calculation without this fix. Signed-off-by: Nicolas Ferre Cc: Krzysztof Helt Cc: Haavard Skinnemoen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/atmel_lcdfb.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index 2830ffd..d5e8010 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -484,6 +484,7 @@ static int atmel_lcdfb_set_par(struct fb_info *info) unsigned long value; unsigned long clk_value_khz; unsigned long bits_per_line; + unsigned long pix_factor = 2; might_sleep(); @@ -516,20 +517,24 @@ static int atmel_lcdfb_set_par(struct fb_info *info) /* Now, the LCDC core... */ /* Set pixel clock */ + if (cpu_is_at91sam9g45() && !cpu_is_at91sam9g45es()) + pix_factor = 1; + clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000; value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock)); - if (value < 2) { + if (value < pix_factor) { dev_notice(info->device, "Bypassing pixel clock divider\n"); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); } else { - value = (value / 2) - 1; + value = (value / pix_factor) - 1; dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value); lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); - info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1))); + info->var.pixclock = + KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1))); dev_dbg(info->device, " updated pixclk: %lu KHz\n", PICOS2KHZ(info->var.pixclock)); } -- cgit v1.1 From 265f2a057bf6b567a32bb16dc8b1765cf0555d9f Mon Sep 17 00:00:00 2001 From: Rask Ingemann Lambertsen Date: Wed, 11 Nov 2009 14:26:36 -0800 Subject: rtc: pcf50633: fix month off-by-one error The PCF50633 stores a month value of 1-12, but the kernel wants 0-11. Signed-off-by: Rask Ingemann Lambertsen Signed-off-by: Paul Fertser Cc: Paul Gortmaker Cc: Balaji Rao Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index f4dd87e..77b40dd 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -70,7 +70,7 @@ static void pcf2rtc_time(struct rtc_time *rtc, struct pcf50633_time *pcf) rtc->tm_hour = bcd2bin(pcf->time[PCF50633_TI_HOUR]); rtc->tm_wday = bcd2bin(pcf->time[PCF50633_TI_WKDAY]); rtc->tm_mday = bcd2bin(pcf->time[PCF50633_TI_DAY]); - rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]); + rtc->tm_mon = bcd2bin(pcf->time[PCF50633_TI_MONTH]) - 1; rtc->tm_year = bcd2bin(pcf->time[PCF50633_TI_YEAR]) + 100; } @@ -81,7 +81,7 @@ static void rtc2pcf_time(struct pcf50633_time *pcf, struct rtc_time *rtc) pcf->time[PCF50633_TI_HOUR] = bin2bcd(rtc->tm_hour); pcf->time[PCF50633_TI_WKDAY] = bin2bcd(rtc->tm_wday); pcf->time[PCF50633_TI_DAY] = bin2bcd(rtc->tm_mday); - pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon); + pcf->time[PCF50633_TI_MONTH] = bin2bcd(rtc->tm_mon + 1); pcf->time[PCF50633_TI_YEAR] = bin2bcd(rtc->tm_year % 100); } -- cgit v1.1 From 05f45d7d746d07c95588871abf933334856c1a3b Mon Sep 17 00:00:00 2001 From: Werner Almesberger Date: Wed, 11 Nov 2009 14:26:40 -0800 Subject: rtc: pcf50633: consider alrm->enable in pcf50633_rtc_set_alarm According to Documentation/rtc.txt, RTC_WKALM_SET sets the alarm time and enables/disables the alarm. We implement RTC_WKALM_SET through pcf50633_rtc_set_alarm. The enabling/disabling part was missing. Signed-off-by: Werner Almesberger Reported-by: Michael 'Mickey' Lauer Signed-off-by: Paul Fertser Cc: Paul Gortmaker Cc: Balaji Rao Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-pcf50633.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c index 77b40dd..33a10c4 100644 --- a/drivers/rtc/rtc-pcf50633.c +++ b/drivers/rtc/rtc-pcf50633.c @@ -245,8 +245,9 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA, PCF50633_TI_EXTENT, &pcf_tm.time[0]); - if (!alarm_masked) + if (!alarm_masked || alrm->enabled) pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM); + rtc->alarm_enabled = alrm->enabled; return ret; } -- cgit v1.1 From 80647b959f97fa20a4714dde3e07b7f69d896556 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:41 -0800 Subject: serial: fix printk format specifiers for struct uart_port::iobase struct uart_port::iobase is unsigned long, so use %lx as printk format specifier. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 2 +- drivers/serial/8250_pci.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index b1ae774..737b4c9 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1089,7 +1089,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) if (!up->port.iobase && !up->port.mapbase && !up->port.membase) return; - DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04x, 0x%p): ", + DEBUG_AUTOCONF("ttyS%d: autoconf (0x%04lx, 0x%p): ", serial_index(&up->port), up->port.iobase, up->port.membase); /* diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 42e8550..b2d65b2 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2383,7 +2383,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board) break; #ifdef SERIAL_DEBUG_PCI - printk(KERN_DEBUG "Setup PCI port: port %x, irq %d, type %d\n", + printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n", serial_port.iobase, serial_port.irq, serial_port.iotype); #endif -- cgit v1.1 From b87e5e2b8ed9336566100c8c796ab6dd52436881 Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Wed, 11 Nov 2009 14:26:42 -0800 Subject: serial: add support for the Lava Quattro PCI quad-port 16550A card This seems to be a different model (with a different PCI ID) than the "Quatro" card that is also in the list. Signed-off-by: Lennert Buytenhek Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/serial/8250_pci.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index b2d65b2..b28af13 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -3139,6 +3139,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, + { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, -- cgit v1.1 From 49c1d9da1c83b83e4ed65bb84326835cdb3e7327 Mon Sep 17 00:00:00 2001 From: Ladislav Michl Date: Wed, 11 Nov 2009 14:26:43 -0800 Subject: mmci-omap: free irq resource Free IRQ on remove. Signed-off-by: Ladislav Michl Acked-by: Tony Lindgren Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/mmc/host/omap.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index e7a331d..b8fd7af 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1529,6 +1529,7 @@ static int mmc_omap_remove(struct platform_device *pdev) host->pdata->cleanup(&pdev->dev); mmc_omap_fclk_enable(host, 0); + free_irq(host->irq, host); clk_put(host->fclk); clk_disable(host->iclk); clk_put(host->iclk); -- cgit v1.1 From 93f40e6f1493ae0c1e04760b221c125ef5e47205 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 11 Nov 2009 14:26:47 -0800 Subject: fb: put framebuffer drivers back under the "frame buffer devices" menu The config FB_PRE_INIT_FB entry in drivers/video/Kconfig pushes all entries below it out of the menuconfig selection. Fix this. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 9bbb285..188e1ba 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2121,7 +2121,7 @@ config FB_EP93XX config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" - depends on FB_MB862XX_LIME + depends on FB && FB_MB862XX_LIME ---help--- Select this option if display contents should be inherited as set by the bootloader. -- cgit v1.1 From 61df33370c52633b47d794f5e024eb15ca9a2efe Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 11 Nov 2009 14:26:48 -0800 Subject: rtc-vr41xx: fix do_div() warning drivers/rtc/rtc-vr41xx.c: In function 'vr41xx_rtc_irq_set_freq': drivers/rtc/rtc-vr41xx.c:217: warning: comparison of distinct pointer types lacks a cast drivers/rtc/rtc-vr41xx.c:217: warning: right shift count >= width of type drivers/rtc/rtc-vr41xx.c:217: warning: passing argument 1 of '__div64_32' from incompatible pointer type include/asm-generic/div64.h:35: note: expected 'uint64_t *' but argument is of type 'long unsigned int *' Signed-off-by: Yoichi Yuasa Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: Paul Mundt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-vr41xx.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-vr41xx.c b/drivers/rtc/rtc-vr41xx.c index 2c839d0..fadddac 100644 --- a/drivers/rtc/rtc-vr41xx.c +++ b/drivers/rtc/rtc-vr41xx.c @@ -209,19 +209,18 @@ static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm) static int vr41xx_rtc_irq_set_freq(struct device *dev, int freq) { - unsigned long count; + u64 count; if (!is_power_of_2(freq)) return -EINVAL; count = RTC_FREQUENCY; do_div(count, freq); - periodic_count = count; - spin_lock_irq(&rtc_lock); - rtc1_write(RTCL1LREG, count); - rtc1_write(RTCL1HREG, count >> 16); + periodic_count = count; + rtc1_write(RTCL1LREG, periodic_count); + rtc1_write(RTCL1HREG, periodic_count >> 16); spin_unlock_irq(&rtc_lock); -- cgit v1.1 From bcb3a1676b87effbdeffe8da5c44f63433d158d9 Mon Sep 17 00:00:00 2001 From: Scott Valentine Date: Wed, 11 Nov 2009 14:26:49 -0800 Subject: rtc: v3020: fix v3020_mmio_read_bit() v3020_mmio_read_bit() always returns 0 when left_shift > 7. v3020_mmio_read_bit()'s return type is (unsigned char). The code returns a value masked by (1 << left_shift) that is casted to the return type. If left_shift is larger than 7, the cast will always result in a 0 return value. The problem was discovered with left_shift = 16, and the included patch corrects the problem. The bug was introduced in the last (Apr 3 2009) commit of the file, kernel versions 2.6.30 and later. Cc: Alessandro Zummo Cc: Paul Gortmaker Cc: Raphael Assenat Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-v3020.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-v3020.c b/drivers/rtc/rtc-v3020.c index ad16405..423cd5a 100644 --- a/drivers/rtc/rtc-v3020.c +++ b/drivers/rtc/rtc-v3020.c @@ -96,7 +96,7 @@ static void v3020_mmio_write_bit(struct v3020 *chip, unsigned char bit) static unsigned char v3020_mmio_read_bit(struct v3020 *chip) { - return readl(chip->ioaddress) & (1 << chip->leftshift); + return !!(readl(chip->ioaddress) & (1 << chip->leftshift)); } static struct v3020_chip_ops v3020_mmio_ops = { -- cgit v1.1 From d62668e1dd830a81ef73ec73386b420cb2a9ca62 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 11 Nov 2009 14:26:50 -0800 Subject: gpiolib: fix device_create() result check In case of failure, device_create() returns not NULL but the error code. The current code checks for non-NULL though which causes kernel oops in sysfs_create_group() when device_create() fails. Check for error using IS_ERR() and propagate the error value using PTR_ERR() instead of fixed -ENODEV code returned now... Signed-off-by: Sergei Shtylyov Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/gpiolib.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 662ed92..50de0f5 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -661,7 +661,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), desc, ioname ? ioname : "gpio%d", gpio); - if (dev) { + if (!IS_ERR(dev)) { if (direction_may_change) status = sysfs_create_group(&dev->kobj, &gpio_attr_group); @@ -679,7 +679,7 @@ int gpio_export(unsigned gpio, bool direction_may_change) if (status != 0) device_unregister(dev); } else - status = -ENODEV; + status = PTR_ERR(dev); if (status == 0) set_bit(FLAG_EXPORT, &desc->flags); } @@ -800,11 +800,11 @@ static int gpiochip_export(struct gpio_chip *chip) mutex_lock(&sysfs_lock); dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip, "gpiochip%d", chip->base); - if (dev) { + if (!IS_ERR(dev)) { status = sysfs_create_group(&dev->kobj, &gpiochip_attr_group); } else - status = -ENODEV; + status = PTR_ERR(dev); chip->exported = (status == 0); mutex_unlock(&sysfs_lock); -- cgit v1.1 From 69fd8d24673a8f4f8be5db7f84b5dc9e4ff354c8 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Wed, 11 Nov 2009 14:26:51 -0800 Subject: drivers/video/msm: update to new kernel TASK_INTERRUPTIBLE and friends are now only available after including , so include it when needed. bus_id is no longer available/necessary, so remove that. Android pmem driver is not available in mainline, so remove its hooks from drivers/video. Signed-off-by: Pavel Machek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/msm/mddi.c | 1 + drivers/video/msm/mddi_client_nt35399.c | 1 + drivers/video/msm/mddi_client_toshiba.c | 1 + drivers/video/msm/mdp.c | 18 ------------------ drivers/video/msm/mdp_ppp.c | 20 -------------------- 5 files changed, 3 insertions(+), 38 deletions(-) (limited to 'drivers') diff --git a/drivers/video/msm/mddi.c b/drivers/video/msm/mddi.c index 5c5a1ad..474421f 100644 --- a/drivers/video/msm/mddi.c +++ b/drivers/video/msm/mddi.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/msm/mddi_client_nt35399.c index 9c78050..c9e9349 100644 --- a/drivers/video/msm/mddi_client_nt35399.c +++ b/drivers/video/msm/mddi_client_nt35399.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/msm/mddi_client_toshiba.c index 80d0f5f..71048e7 100644 --- a/drivers/video/msm/mddi_client_toshiba.c +++ b/drivers/video/msm/mddi_client_toshiba.c @@ -20,6 +20,7 @@ #include #include #include +#include #include diff --git a/drivers/video/msm/mdp.c b/drivers/video/msm/mdp.c index 99636a2..6c519e2 100644 --- a/drivers/video/msm/mdp.c +++ b/drivers/video/msm/mdp.c @@ -22,9 +22,6 @@ #include #include #include -#ifdef CONFIG_ANDROID_PMEM -#include -#endif #include #include @@ -262,11 +259,6 @@ int get_img(struct mdp_img *img, struct fb_info *info, struct file *file; unsigned long vstart; -#ifdef CONFIG_ANDROID_PMEM - if (!get_pmem_file(img->memory_id, start, &vstart, len, filep)) - return 0; -#endif - file = fget_light(img->memory_id, &put_needed); if (file == NULL) return -1; @@ -283,12 +275,6 @@ int get_img(struct mdp_img *img, struct fb_info *info, void put_img(struct file *src_file, struct file *dst_file) { -#ifdef CONFIG_ANDROID_PMEM - if (src_file) - put_pmem_file(src_file); - if (dst_file) - put_pmem_file(dst_file); -#endif } int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb, @@ -320,9 +306,6 @@ int mdp_blit(struct mdp_device *mdp_dev, struct fb_info *fb, if (unlikely(get_img(&req->dst, fb, &dst_start, &dst_len, &dst_file))) { printk(KERN_ERR "mpd_ppp: could not retrieve dst image from " "memory\n"); -#ifdef CONFIG_ANDROID_PMEM - put_pmem_file(src_file); -#endif return -EINVAL; } mutex_lock(&mdp_mutex); @@ -499,7 +482,6 @@ int mdp_probe(struct platform_device *pdev) /* register mdp device */ mdp->mdp_dev.dev.parent = &pdev->dev; mdp->mdp_dev.dev.class = mdp_class; - snprintf(mdp->mdp_dev.dev.bus_id, BUS_ID_SIZE, "mdp%d", pdev->id); /* if you can remove the platform device you'd have to implement * this: diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/msm/mdp_ppp.c index ba2c467..4ff001f 100644 --- a/drivers/video/msm/mdp_ppp.c +++ b/drivers/video/msm/mdp_ppp.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include "mdp_hw.h" @@ -579,25 +578,6 @@ static int valid_src_dst(unsigned long src_start, unsigned long src_len, static void flush_imgs(struct mdp_blit_req *req, struct mdp_regs *regs, struct file *src_file, struct file *dst_file) { -#ifdef CONFIG_ANDROID_PMEM - uint32_t src0_len, src1_len, dst0_len, dst1_len; - - /* flush src images to memory before dma to mdp */ - get_len(&req->src, &req->src_rect, regs->src_bpp, &src0_len, - &src1_len); - flush_pmem_file(src_file, req->src.offset, src0_len); - if (IS_PSEUDOPLNR(req->src.format)) - flush_pmem_file(src_file, req->src.offset + src0_len, - src1_len); - - /* flush dst images */ - get_len(&req->dst, &req->dst_rect, regs->dst_bpp, &dst0_len, - &dst1_len); - flush_pmem_file(dst_file, req->dst.offset, dst0_len); - if (IS_PSEUDOPLNR(req->dst.format)) - flush_pmem_file(dst_file, req->dst.offset + dst0_len, - dst1_len); -#endif } static void get_chroma_addr(struct mdp_img *img, struct mdp_rect *rect, -- cgit v1.1 From cbf83cc5a29dba480cf1ba1c5e3417a0d4a31410 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 11 Nov 2009 14:26:52 -0800 Subject: pps: locking scheme fix up for PPS_GETPARAMS Userland programs may read/write PPS parameters at same time and these operations may corrupt PPS data. Signed-off-by: Rodolfo Giometti Tested-by: Reg Clemens Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/pps.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index fea17e7..ca5183b 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -71,9 +71,14 @@ static long pps_cdev_ioctl(struct file *file, case PPS_GETPARAMS: pr_debug("PPS_GETPARAMS: source %d\n", pps->id); - /* Return current parameters */ - err = copy_to_user(uarg, &pps->params, - sizeof(struct pps_kparams)); + spin_lock_irq(&pps->lock); + + /* Get the current parameters */ + params = pps->params; + + spin_unlock_irq(&pps->lock); + + err = copy_to_user(uarg, ¶ms, sizeof(struct pps_kparams)); if (err) return -EFAULT; -- cgit v1.1 From 276b282e904f690dc930f9bc946110651f297669 Mon Sep 17 00:00:00 2001 From: Rodolfo Giometti Date: Wed, 11 Nov 2009 14:26:54 -0800 Subject: pps: events reporting fix up PPS events must be recorded according to PPS's mode settings. If a process asks for (i.e.) capture-assert events only, when the PPS client calls the pps_event() function to save the current PPS event, we should verify the event type and then discard unwanted ones. Also, without this patch userland processes waiting for a specific PPS event (assert or clear but not both) may be awakened at wrong time. Signed-off-by: Rodolfo Giometti Tested-by: William S. Brasher Tested-by: Reg Clemens Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/pps/kapi.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/pps/kapi.c b/drivers/pps/kapi.c index 35a0b19..2d414e2 100644 --- a/drivers/pps/kapi.c +++ b/drivers/pps/kapi.c @@ -271,6 +271,7 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) { struct pps_device *pps; unsigned long flags; + int captured = 0; if ((event & (PPS_CAPTUREASSERT | PPS_CAPTURECLEAR)) == 0) { printk(KERN_ERR "pps: unknown event (%x) for source %d\n", @@ -293,7 +294,8 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) /* Check the event */ pps->current_mode = pps->params.mode; - if (event & PPS_CAPTUREASSERT) { + if ((event & PPS_CAPTUREASSERT) & + (pps->params.mode & PPS_CAPTUREASSERT)) { /* We have to add an offset? */ if (pps->params.mode & PPS_OFFSETASSERT) pps_add_offset(ts, &pps->params.assert_off_tu); @@ -303,8 +305,11 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) pps->assert_sequence++; pr_debug("capture assert seq #%u for source %d\n", pps->assert_sequence, source); + + captured = ~0; } - if (event & PPS_CAPTURECLEAR) { + if ((event & PPS_CAPTURECLEAR) & + (pps->params.mode & PPS_CAPTURECLEAR)) { /* We have to add an offset? */ if (pps->params.mode & PPS_OFFSETCLEAR) pps_add_offset(ts, &pps->params.clear_off_tu); @@ -314,12 +319,17 @@ void pps_event(int source, struct pps_ktime *ts, int event, void *data) pps->clear_sequence++; pr_debug("capture clear seq #%u for source %d\n", pps->clear_sequence, source); + + captured = ~0; } - pps->go = ~0; - wake_up_interruptible(&pps->queue); + /* Wake up iif captured somthing */ + if (captured) { + pps->go = ~0; + wake_up_interruptible(&pps->queue); - kill_fasync(&pps->async_queue, SIGIO, POLL_IN); + kill_fasync(&pps->async_queue, SIGIO, POLL_IN); + } spin_unlock_irqrestore(&pps->lock, flags); -- cgit v1.1 From 68fb2e499b054bf8359965422fffac70eff56004 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 9 Nov 2009 02:42:47 +0000 Subject: uio: pm_runtime_disable is needed if failed Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/uio/uio_pdrv_genirq.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c index 02347c5..aa53db9 100644 --- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -178,6 +178,7 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev) return 0; bad1: kfree(priv); + pm_runtime_disable(&pdev->dev); bad0: return ret; } -- cgit v1.1