From 5a71c61b7724ad0acedff254e07dc1a7dd05ee76 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 13 Sep 2010 09:47:42 +0000 Subject: drivers/char/hvc_vio: Use static const char arrays Signed-off-by: Joe Perches Reviewed-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt --- drivers/char/hvc_vio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index 27370e9..5e2f52b 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -39,7 +39,7 @@ #include "hvc_console.h" -char hvc_driver_name[] = "hvc_console"; +static const char hvc_driver_name[] = "hvc_console"; static struct vio_device_id hvc_driver_table[] __devinitdata = { {"serial", "hvterm1"}, -- cgit v1.1 From 8cb7c71bda16e2d67a332642661e0b4219641a23 Mon Sep 17 00:00:00 2001 From: Srikanth Krishnakar Date: Thu, 14 Oct 2010 04:03:35 +0000 Subject: rtc-cmos.c : Fix warning on PowerPC The following warning is seen while compilation of PowerPC kernel: CC drivers/rtc/rtc-cmos.o drivers/rtc/rtc-cmos.c:697:2: warning: #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. Fix it by adding defined(__powerpc__). Signed-off-by: Srikanth Krishnakar Signed-off-by: Benjamin Herrenschmidt --- drivers/rtc/rtc-cmos.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 5856167..7e6ce62 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -687,7 +687,8 @@ cmos_do_probe(struct device *dev, struct resource *ports, int rtc_irq) #if defined(CONFIG_ATARI) address_space = 64; #elif defined(__i386__) || defined(__x86_64__) || defined(__arm__) \ - || defined(__sparc__) || defined(__mips__) + || defined(__sparc__) || defined(__mips__) \ + || defined(__powerpc__) address_space = 128; #else #warning Assuming 128 bytes of RTC+NVRAM address space, not 64 bytes. -- cgit v1.1 From 72b962d3bba19657abaa6cc8806661ecbde5ee92 Mon Sep 17 00:00:00 2001 From: Tracey Dent Date: Fri, 15 Oct 2010 17:30:48 +0000 Subject: powerpc/ps3: Replace the use of -objs with -y Changed -objs to -y in Makefile. Signed-off-by: Tracey Dent Signed-off-by: Benjamin Herrenschmidt --- drivers/ps3/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ps3/Makefile b/drivers/ps3/Makefile index ccea15c..50cb1e1 100644 --- a/drivers/ps3/Makefile +++ b/drivers/ps3/Makefile @@ -1,6 +1,6 @@ obj-$(CONFIG_PS3_VUART) += ps3-vuart.o obj-$(CONFIG_PS3_PS3AV) += ps3av_mod.o -ps3av_mod-objs += ps3av.o ps3av_cmd.o +ps3av_mod-y := ps3av.o ps3av_cmd.o obj-$(CONFIG_PPC_PS3) += sys-manager-core.o obj-$(CONFIG_PS3_SYS_MANAGER) += ps3-sys-manager.o obj-$(CONFIG_PS3_STORAGE) += ps3stor_lib.o -- cgit v1.1 From f6aedd8606ae673f8e1f4d972fc86c451fbc8ba7 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Tue, 26 Oct 2010 17:35:11 +0000 Subject: powerpc/macio: Ensure all dma routines get copied over Also add a comment to dev_archdata, indicating that changes there need to be verified against the driver code. Signed-off-by: Milton Miller Signed-off-by: Nishanth Aravamudan Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/macio_asic.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index b6e7ddc..4daf9e5 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -387,11 +387,10 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, /* Set the DMA ops to the ones from the PCI device, this could be * fishy if we didn't know that on PowerMac it's always direct ops * or iommu ops that will work fine + * + * To get all the fields, copy all archdata */ - dev->ofdev.dev.archdata.dma_ops = - chip->lbus.pdev->dev.archdata.dma_ops; - dev->ofdev.dev.archdata.dma_data = - chip->lbus.pdev->dev.archdata.dma_data; + dev->ofdev.dev.archdata = chip->lbus.pdev->dev.archdata; #endif /* CONFIG_PCI */ #ifdef DEBUG -- cgit v1.1 From 982cf00412a890ca738c2d78528b652ca431ad1a Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Tue, 30 Nov 2010 23:54:46 +0000 Subject: of/address: Use propper endianess in get_flags This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and such. Those variables are pointing to the device tree which containts intergers in big endian format. Most functions are doing it right because of_read_number() is doing the right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and of_bus_isa_map() were accessing the data directly and were doing it wrong. Signed-off-by: Sebastian Andrzej Siewior Acked-by: Benjamin Herrenschmidt Signed-off-by: Benjamin Herrenschmidt --- drivers/of/address.c | 54 +++++++++++++++++++++++++++------------------------- 1 file changed, 28 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/of/address.c b/drivers/of/address.c index 3a1c7e7..b4559c5 100644 --- a/drivers/of/address.c +++ b/drivers/of/address.c @@ -12,13 +12,13 @@ (ns) > 0) static struct of_bus *of_match_bus(struct device_node *np); -static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, - u64 size, unsigned int flags, +static int __of_address_to_resource(struct device_node *dev, + const __be32 *addrp, u64 size, unsigned int flags, struct resource *r); /* Debug utility */ #ifdef DEBUG -static void of_dump_addr(const char *s, const u32 *addr, int na) +static void of_dump_addr(const char *s, const __be32 *addr, int na) { printk(KERN_DEBUG "%s", s); while (na--) @@ -26,7 +26,7 @@ static void of_dump_addr(const char *s, const u32 *addr, int na) printk("\n"); } #else -static void of_dump_addr(const char *s, const u32 *addr, int na) { } +static void of_dump_addr(const char *s, const __be32 *addr, int na) { } #endif /* Callbacks for bus specific translators */ @@ -36,10 +36,10 @@ struct of_bus { int (*match)(struct device_node *parent); void (*count_cells)(struct device_node *child, int *addrc, int *sizec); - u64 (*map)(u32 *addr, const u32 *range, + u64 (*map)(u32 *addr, const __be32 *range, int na, int ns, int pna); int (*translate)(u32 *addr, u64 offset, int na); - unsigned int (*get_flags)(const u32 *addr); + unsigned int (*get_flags)(const __be32 *addr); }; /* @@ -55,7 +55,7 @@ static void of_bus_default_count_cells(struct device_node *dev, *sizec = of_n_size_cells(dev); } -static u64 of_bus_default_map(u32 *addr, const u32 *range, +static u64 of_bus_default_map(u32 *addr, const __be32 *range, int na, int ns, int pna) { u64 cp, s, da; @@ -85,7 +85,7 @@ static int of_bus_default_translate(u32 *addr, u64 offset, int na) return 0; } -static unsigned int of_bus_default_get_flags(const u32 *addr) +static unsigned int of_bus_default_get_flags(const __be32 *addr) { return IORESOURCE_MEM; } @@ -110,10 +110,10 @@ static void of_bus_pci_count_cells(struct device_node *np, *sizec = 2; } -static unsigned int of_bus_pci_get_flags(const u32 *addr) +static unsigned int of_bus_pci_get_flags(const __be32 *addr) { unsigned int flags = 0; - u32 w = addr[0]; + u32 w = be32_to_cpup(addr); switch((w >> 24) & 0x03) { case 0x01: @@ -129,7 +129,8 @@ static unsigned int of_bus_pci_get_flags(const u32 *addr) return flags; } -static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna) +static u64 of_bus_pci_map(u32 *addr, const __be32 *range, int na, int ns, + int pna) { u64 cp, s, da; unsigned int af, rf; @@ -160,7 +161,7 @@ static int of_bus_pci_translate(u32 *addr, u64 offset, int na) return of_bus_default_translate(addr + 1, offset, na - 1); } -const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, +const __be32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, unsigned int *flags) { const __be32 *prop; @@ -207,7 +208,7 @@ EXPORT_SYMBOL(of_get_pci_address); int of_pci_address_to_resource(struct device_node *dev, int bar, struct resource *r) { - const u32 *addrp; + const __be32 *addrp; u64 size; unsigned int flags; @@ -237,12 +238,13 @@ static void of_bus_isa_count_cells(struct device_node *child, *sizec = 1; } -static u64 of_bus_isa_map(u32 *addr, const u32 *range, int na, int ns, int pna) +static u64 of_bus_isa_map(u32 *addr, const __be32 *range, int na, int ns, + int pna) { u64 cp, s, da; /* Check address type match */ - if ((addr[0] ^ range[0]) & 0x00000001) + if ((addr[0] ^ range[0]) & cpu_to_be32(1)) return OF_BAD_ADDR; /* Read address values, skipping high cell */ @@ -264,10 +266,10 @@ static int of_bus_isa_translate(u32 *addr, u64 offset, int na) return of_bus_default_translate(addr + 1, offset, na - 1); } -static unsigned int of_bus_isa_get_flags(const u32 *addr) +static unsigned int of_bus_isa_get_flags(const __be32 *addr) { unsigned int flags = 0; - u32 w = addr[0]; + u32 w = be32_to_cpup(addr); if (w & 1) flags |= IORESOURCE_IO; @@ -330,7 +332,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, struct of_bus *pbus, u32 *addr, int na, int ns, int pna, const char *rprop) { - const u32 *ranges; + const __be32 *ranges; unsigned int rlen; int rone; u64 offset = OF_BAD_ADDR; @@ -398,7 +400,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, * that can be mapped to a cpu physical address). This is not really specified * that way, but this is traditionally the way IBM at least do things */ -u64 __of_translate_address(struct device_node *dev, const u32 *in_addr, +u64 __of_translate_address(struct device_node *dev, const __be32 *in_addr, const char *rprop) { struct device_node *parent = NULL; @@ -475,22 +477,22 @@ u64 __of_translate_address(struct device_node *dev, const u32 *in_addr, return result; } -u64 of_translate_address(struct device_node *dev, const u32 *in_addr) +u64 of_translate_address(struct device_node *dev, const __be32 *in_addr) { return __of_translate_address(dev, in_addr, "ranges"); } EXPORT_SYMBOL(of_translate_address); -u64 of_translate_dma_address(struct device_node *dev, const u32 *in_addr) +u64 of_translate_dma_address(struct device_node *dev, const __be32 *in_addr) { return __of_translate_address(dev, in_addr, "dma-ranges"); } EXPORT_SYMBOL(of_translate_dma_address); -const u32 *of_get_address(struct device_node *dev, int index, u64 *size, +const __be32 *of_get_address(struct device_node *dev, int index, u64 *size, unsigned int *flags) { - const u32 *prop; + const __be32 *prop; unsigned int psize; struct device_node *parent; struct of_bus *bus; @@ -525,8 +527,8 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size, } EXPORT_SYMBOL(of_get_address); -static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, - u64 size, unsigned int flags, +static int __of_address_to_resource(struct device_node *dev, + const __be32 *addrp, u64 size, unsigned int flags, struct resource *r) { u64 taddr; @@ -564,7 +566,7 @@ static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, int of_address_to_resource(struct device_node *dev, int index, struct resource *r) { - const u32 *addrp; + const __be32 *addrp; u64 size; unsigned int flags; -- cgit v1.1 From 98b14d6b290d96b24ae993ceaccc59b2aa4b130c Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 5 Dec 2010 05:05:37 +0000 Subject: powerpc/powermac: Make auto-loading of therm_pm72 possible The therm_pm72 driver, used on the PowerMac G5 range, cannot be auto-loaded, since the driver itself creates both the device node and the driver instance. Moving the device node creation to the platform setup code and adding the necessary MODULE_DEVICE_TABLE() information allows the driver to be automatically loaded by udev on any semi-modern distribution. It "fixes" a major source of problem on G5 machines where the driver wasn't explicitely loaded by default, and the system would automatically shutdown under load. Tested on an Xserve G5. Signed-off-by: Marc Zyngier Cc: Benjamin Herrenschmidt Signed-off-by: Benjamin Herrenschmidt --- drivers/macintosh/therm_pm72.c | 30 +++++------------------------- 1 file changed, 5 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 4454927..2e041fd 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -2213,6 +2213,9 @@ static void fcu_lookup_fans(struct device_node *fcu_node) static int fcu_of_probe(struct platform_device* dev, const struct of_device_id *match) { state = state_detached; + of_dev = dev; + + dev_info(&dev->dev, "PowerMac G5 Thermal control driver %s\n", VERSION); /* Lookup the fans in the device tree */ fcu_lookup_fans(dev->dev.of_node); @@ -2235,6 +2238,7 @@ static const struct of_device_id fcu_match[] = }, {}, }; +MODULE_DEVICE_TABLE(of, fcu_match); static struct of_platform_driver fcu_of_platform_driver = { @@ -2252,8 +2256,6 @@ static struct of_platform_driver fcu_of_platform_driver = */ static int __init therm_pm72_init(void) { - struct device_node *np; - rackmac = of_machine_is_compatible("RackMac3,1"); if (!of_machine_is_compatible("PowerMac7,2") && @@ -2261,34 +2263,12 @@ static int __init therm_pm72_init(void) !rackmac) return -ENODEV; - printk(KERN_INFO "PowerMac G5 Thermal control driver %s\n", VERSION); - - np = of_find_node_by_type(NULL, "fcu"); - if (np == NULL) { - /* Some machines have strangely broken device-tree */ - np = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/fan@15e"); - if (np == NULL) { - printk(KERN_ERR "Can't find FCU in device-tree !\n"); - return -ENODEV; - } - } - of_dev = of_platform_device_create(np, "temperature", NULL); - if (of_dev == NULL) { - printk(KERN_ERR "Can't register FCU platform device !\n"); - return -ENODEV; - } - - of_register_platform_driver(&fcu_of_platform_driver); - - return 0; + return of_register_platform_driver(&fcu_of_platform_driver); } static void __exit therm_pm72_exit(void) { of_unregister_platform_driver(&fcu_of_platform_driver); - - if (of_dev) - of_device_unregister(of_dev); } module_init(therm_pm72_init); -- cgit v1.1 From 6504cf3412373f42b53a675363c056901c1596cf Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 27 Oct 2010 01:52:55 +0200 Subject: powerpc/512x: scatter/gather dma fix While testing mpc512x-dma driver with dmatest module I've found that I can hang the mpc512x-dma issuing request from multiple threads to the single channel. insmod dmatest.ko max_channels=1 threads_per_chan=16 After investigating this case I've managed to find that this happens if and only if we have more than one queued requests. In this case the driver tries to make use of hardware scatter/gather functionality. I've found two problems with scatter/gather: 1. When TCD is copied form RAM to the TCD register space with memcpy_io() e_sg bit eventually gets cleared. This results in only first TCD being executed. I've added setting of e_sg bit explicitly in the TCD registers. BTW, what is the correct way to do this? (How can I use setbits with bitfield structure?) After that hardware loads consecutive TCDs and we hit the second issue. 2. Existing code clears int_maj bit in the last TCD so we never get an interrupt on transfer completion. With these fixes my tests with many threads of single channel succeed but tests that use many channels simultaneously still don't work reliable. Signed-off-by: Ilya Yanok Acked-by: Wolfgang Denk Signed-off-by: Grant Likely --- drivers/dma/mpc512x_dma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 4e9cbf3..1bc04aa 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -252,11 +252,13 @@ static void mpc_dma_execute(struct mpc_dma_chan *mchan) prev = mdesc; } - prev->tcd->start = 0; prev->tcd->int_maj = 1; /* Send first descriptor in chain into hardware */ memcpy_toio(&mdma->tcd[cid], first->tcd, sizeof(struct mpc_dma_tcd)); + + if (first != prev) + mdma->tcd[cid].e_sg = 1; out_8(&mdma->regs->dmassrt, cid); } -- cgit v1.1 From 2862559e8a1e7c47bb3003f0edbc9db9009dc32b Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 27 Oct 2010 01:52:56 +0200 Subject: powerpc/512x: fix the hanged dma transfer issue Current code clears interrupt active status _after_ submitting new transfers. This leaves a possibility of clearing the interrupt for this new transfer (if it is triggered fast enough) and thus lose this interrupt. We want to clear interrupt active status _before_ new transfers is submitted and for current channel only. Signed-off-by: Ilya Yanok Acked-by: Wolfgang Denk Signed-off-by: Grant Likely --- drivers/dma/mpc512x_dma.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 1bc04aa..0717527 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -276,6 +276,9 @@ static void mpc_dma_irq_process(struct mpc_dma *mdma, u32 is, u32 es, int off) spin_lock(&mchan->lock); + out_8(&mdma->regs->dmacint, ch + off); + out_8(&mdma->regs->dmacerr, ch + off); + /* Check error status */ if (es & (1 << ch)) list_for_each_entry(mdesc, &mchan->active, node) @@ -309,12 +312,6 @@ static irqreturn_t mpc_dma_irq(int irq, void *data) mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmaintl), in_be32(&mdma->regs->dmaerrl), 0); - /* Ack interrupt on all channels */ - out_be32(&mdma->regs->dmainth, 0xFFFFFFFF); - out_be32(&mdma->regs->dmaintl, 0xFFFFFFFF); - out_be32(&mdma->regs->dmaerrh, 0xFFFFFFFF); - out_be32(&mdma->regs->dmaerrl, 0xFFFFFFFF); - /* Schedule tasklet */ tasklet_schedule(&mdma->tasklet); -- cgit v1.1 From ba2eea251f815b3674cde13ecdba4772332bf56e Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 27 Oct 2010 01:52:57 +0200 Subject: powerpc/512x: add MPC8308 dma support MPC8308 has pretty much the same DMA controller as MPC5121 and this patch adds support for MPC8308 to the mpc512x_dma driver. Signed-off-by: Ilya Yanok Acked-by: Wolfgang Denk Signed-off-by: Grant Likely --- drivers/dma/Kconfig | 2 +- drivers/dma/mpc512x_dma.c | 95 +++++++++++++++++++++++++++++++++++------------ 2 files changed, 72 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 6ee2359..ef13873 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -109,7 +109,7 @@ config FSL_DMA config MPC512X_DMA tristate "Freescale MPC512x built-in DMA engine support" - depends on PPC_MPC512x + depends on PPC_MPC512x || PPC_MPC831x select DMA_ENGINE ---help--- Enable support for the Freescale MPC512x built-in DMA engine. diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 0717527..97b92ec 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -1,6 +1,7 @@ /* * Copyright (C) Freescale Semicondutor, Inc. 2007, 2008. * Copyright (C) Semihalf 2009 + * Copyright (C) Ilya Yanok, Emcraft Systems 2010 * * Written by Piotr Ziecik . Hardware description * (defines, structures and comments) was taken from MPC5121 DMA driver @@ -70,6 +71,8 @@ #define MPC_DMA_DMAES_SBE (1 << 1) #define MPC_DMA_DMAES_DBE (1 << 0) +#define MPC_DMA_DMAGPOR_SNOOP_ENABLE (1 << 6) + #define MPC_DMA_TSIZE_1 0x00 #define MPC_DMA_TSIZE_2 0x01 #define MPC_DMA_TSIZE_4 0x02 @@ -104,7 +107,10 @@ struct __attribute__ ((__packed__)) mpc_dma_regs { /* 0x30 */ u32 dmahrsh; /* DMA hw request status high(ch63~32) */ u32 dmahrsl; /* DMA hardware request status low(ch31~0) */ - u32 dmaihsa; /* DMA interrupt high select AXE(ch63~32) */ + union { + u32 dmaihsa; /* DMA interrupt high select AXE(ch63~32) */ + u32 dmagpor; /* (General purpose register on MPC8308) */ + }; u32 dmailsa; /* DMA interrupt low select AXE(ch31~0) */ /* 0x40 ~ 0xff */ u32 reserve0[48]; /* Reserved */ @@ -195,7 +201,9 @@ struct mpc_dma { struct mpc_dma_regs __iomem *regs; struct mpc_dma_tcd __iomem *tcd; int irq; + int irq2; uint error_status; + int is_mpc8308; /* Lock for error_status field in this structure */ spinlock_t error_status_lock; @@ -307,8 +315,10 @@ static irqreturn_t mpc_dma_irq(int irq, void *data) spin_unlock(&mdma->error_status_lock); /* Handle interrupt on each channel */ - mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmainth), + if (mdma->dma.chancnt > 32) { + mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmainth), in_be32(&mdma->regs->dmaerrh), 32); + } mpc_dma_irq_process(mdma, in_be32(&mdma->regs->dmaintl), in_be32(&mdma->regs->dmaerrl), 0); @@ -562,6 +572,7 @@ static struct dma_async_tx_descriptor * mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, size_t len, unsigned long flags) { + struct mpc_dma *mdma = dma_chan_to_mpc_dma(chan); struct mpc_dma_chan *mchan = dma_chan_to_mpc_dma_chan(chan); struct mpc_dma_desc *mdesc = NULL; struct mpc_dma_tcd *tcd; @@ -590,7 +601,8 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, tcd->dsize = MPC_DMA_TSIZE_32; tcd->soff = 32; tcd->doff = 32; - } else if (IS_ALIGNED(src | dst | len, 16)) { + } else if (!mdma->is_mpc8308 && IS_ALIGNED(src | dst | len, 16)) { + /* MPC8308 doesn't support 16 byte transfers */ tcd->ssize = MPC_DMA_TSIZE_16; tcd->dsize = MPC_DMA_TSIZE_16; tcd->soff = 16; @@ -650,6 +662,15 @@ static int __devinit mpc_dma_probe(struct platform_device *op, return -EINVAL; } + if (of_device_is_compatible(dn, "fsl,mpc8308-dma")) { + mdma->is_mpc8308 = 1; + mdma->irq2 = irq_of_parse_and_map(dn, 1); + if (mdma->irq2 == NO_IRQ) { + dev_err(dev, "Error mapping IRQ!\n"); + return -EINVAL; + } + } + retval = of_address_to_resource(dn, 0, &res); if (retval) { dev_err(dev, "Error parsing memory region!\n"); @@ -680,11 +701,23 @@ static int __devinit mpc_dma_probe(struct platform_device *op, return -EINVAL; } + if (mdma->is_mpc8308) { + retval = devm_request_irq(dev, mdma->irq2, &mpc_dma_irq, 0, + DRV_NAME, mdma); + if (retval) { + dev_err(dev, "Error requesting IRQ2!\n"); + return -EINVAL; + } + } + spin_lock_init(&mdma->error_status_lock); dma = &mdma->dma; dma->dev = dev; - dma->chancnt = MPC_DMA_CHANNELS; + if (!mdma->is_mpc8308) + dma->chancnt = MPC_DMA_CHANNELS; + else + dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */ dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources; dma->device_free_chan_resources = mpc_dma_free_chan_resources; dma->device_issue_pending = mpc_dma_issue_pending; @@ -720,26 +753,40 @@ static int __devinit mpc_dma_probe(struct platform_device *op, * - Round-robin group arbitration, * - Round-robin channel arbitration. */ - out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG | - MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA); - - /* Disable hardware DMA requests */ - out_be32(&mdma->regs->dmaerqh, 0); - out_be32(&mdma->regs->dmaerql, 0); - - /* Disable error interrupts */ - out_be32(&mdma->regs->dmaeeih, 0); - out_be32(&mdma->regs->dmaeeil, 0); - - /* Clear interrupts status */ - out_be32(&mdma->regs->dmainth, 0xFFFFFFFF); - out_be32(&mdma->regs->dmaintl, 0xFFFFFFFF); - out_be32(&mdma->regs->dmaerrh, 0xFFFFFFFF); - out_be32(&mdma->regs->dmaerrl, 0xFFFFFFFF); - - /* Route interrupts to IPIC */ - out_be32(&mdma->regs->dmaihsa, 0); - out_be32(&mdma->regs->dmailsa, 0); + if (!mdma->is_mpc8308) { + out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG | + MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA); + + /* Disable hardware DMA requests */ + out_be32(&mdma->regs->dmaerqh, 0); + out_be32(&mdma->regs->dmaerql, 0); + + /* Disable error interrupts */ + out_be32(&mdma->regs->dmaeeih, 0); + out_be32(&mdma->regs->dmaeeil, 0); + + /* Clear interrupts status */ + out_be32(&mdma->regs->dmainth, 0xFFFFFFFF); + out_be32(&mdma->regs->dmaintl, 0xFFFFFFFF); + out_be32(&mdma->regs->dmaerrh, 0xFFFFFFFF); + out_be32(&mdma->regs->dmaerrl, 0xFFFFFFFF); + + /* Route interrupts to IPIC */ + out_be32(&mdma->regs->dmaihsa, 0); + out_be32(&mdma->regs->dmailsa, 0); + } else { + /* MPC8308 has 16 channels and lacks some registers */ + out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA); + + /* enable snooping */ + out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE); + /* Disable error interrupts */ + out_be32(&mdma->regs->dmaeeil, 0); + + /* Clear interrupts status */ + out_be32(&mdma->regs->dmaintl, 0xFFFF); + out_be32(&mdma->regs->dmaerrl, 0xFFFF); + } /* Register DMA engine */ dev_set_drvdata(dev, mdma); -- cgit v1.1 From a276991357c63bfb8d3ffdf5800054dba4f8d558 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 27 Oct 2010 01:52:58 +0200 Subject: powerpc/512x: try to free dma descriptors in case of allocation failure Currently completed descriptors are processed in the tasklet. This can lead to dead lock in case of CONFIG_NET_DMA enabled (new requests are submitted from softirq context and dma_memcpy_to_iovec() busy loops until the requests is submitted). To prevent this we should process completed descriptors from the allocation failure path in prepare_memcpy too. Signed-off-by: Ilya Yanok Cc: Piotr Ziecik Signed-off-by: Grant Likely --- drivers/dma/mpc512x_dma.c | 79 +++++++++++++++++++++++++++-------------------- 1 file changed, 45 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c index 97b92ec..59c2701 100644 --- a/drivers/dma/mpc512x_dma.c +++ b/drivers/dma/mpc512x_dma.c @@ -328,19 +328,55 @@ static irqreturn_t mpc_dma_irq(int irq, void *data) return IRQ_HANDLED; } -/* DMA Tasklet */ -static void mpc_dma_tasklet(unsigned long data) +/* proccess completed descriptors */ +static void mpc_dma_process_completed(struct mpc_dma *mdma) { - struct mpc_dma *mdma = (void *)data; dma_cookie_t last_cookie = 0; struct mpc_dma_chan *mchan; struct mpc_dma_desc *mdesc; struct dma_async_tx_descriptor *desc; unsigned long flags; LIST_HEAD(list); - uint es; int i; + for (i = 0; i < mdma->dma.chancnt; i++) { + mchan = &mdma->channels[i]; + + /* Get all completed descriptors */ + spin_lock_irqsave(&mchan->lock, flags); + if (!list_empty(&mchan->completed)) + list_splice_tail_init(&mchan->completed, &list); + spin_unlock_irqrestore(&mchan->lock, flags); + + if (list_empty(&list)) + continue; + + /* Execute callbacks and run dependencies */ + list_for_each_entry(mdesc, &list, node) { + desc = &mdesc->desc; + + if (desc->callback) + desc->callback(desc->callback_param); + + last_cookie = desc->cookie; + dma_run_dependencies(desc); + } + + /* Free descriptors */ + spin_lock_irqsave(&mchan->lock, flags); + list_splice_tail_init(&list, &mchan->free); + mchan->completed_cookie = last_cookie; + spin_unlock_irqrestore(&mchan->lock, flags); + } +} + +/* DMA Tasklet */ +static void mpc_dma_tasklet(unsigned long data) +{ + struct mpc_dma *mdma = (void *)data; + unsigned long flags; + uint es; + spin_lock_irqsave(&mdma->error_status_lock, flags); es = mdma->error_status; mdma->error_status = 0; @@ -379,35 +415,7 @@ static void mpc_dma_tasklet(unsigned long data) dev_err(mdma->dma.dev, "- Destination Bus Error\n"); } - for (i = 0; i < mdma->dma.chancnt; i++) { - mchan = &mdma->channels[i]; - - /* Get all completed descriptors */ - spin_lock_irqsave(&mchan->lock, flags); - if (!list_empty(&mchan->completed)) - list_splice_tail_init(&mchan->completed, &list); - spin_unlock_irqrestore(&mchan->lock, flags); - - if (list_empty(&list)) - continue; - - /* Execute callbacks and run dependencies */ - list_for_each_entry(mdesc, &list, node) { - desc = &mdesc->desc; - - if (desc->callback) - desc->callback(desc->callback_param); - - last_cookie = desc->cookie; - dma_run_dependencies(desc); - } - - /* Free descriptors */ - spin_lock_irqsave(&mchan->lock, flags); - list_splice_tail_init(&list, &mchan->free); - mchan->completed_cookie = last_cookie; - spin_unlock_irqrestore(&mchan->lock, flags); - } + mpc_dma_process_completed(mdma); } /* Submit descriptor to hardware */ @@ -587,8 +595,11 @@ mpc_dma_prep_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, } spin_unlock_irqrestore(&mchan->lock, iflags); - if (!mdesc) + if (!mdesc) { + /* try to free completed descriptors */ + mpc_dma_process_completed(mdma); return NULL; + } mdesc->error = 0; tcd = mdesc->tcd; -- cgit v1.1