From f0e47c229b489e37ba7e4159ef7f9cf9ccd44e19 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 17 Jul 2007 04:03:03 -0700 Subject: mm: remove ptep_establish() The last user of ptep_establish in mm/ is long gone. Remove the architecture primitive as well. Signed-off-by: Martin Schwidefsky Cc: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/asm-arm/pgtable.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/asm-arm') diff --git a/include/asm-arm/pgtable.h b/include/asm-arm/pgtable.h index cb4c2c9..d2e8171 100644 --- a/include/asm-arm/pgtable.h +++ b/include/asm-arm/pgtable.h @@ -83,14 +83,14 @@ * means that a write to a clean page will cause a permission fault, and * the Linux MM layer will mark the page dirty via handle_pte_fault(). * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_establish() does that for us. + * be flushed, and ptep_set_access_flags() does that for us. * * The "accessed" or "young" bit is emulated by a similar method; we only * allow accesses to the page if the "young" bit is set. Accesses to the * page will cause a fault, and handle_pte_fault() will set the young bit * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_establish() will ensure that the TLB is up to - * date. + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. * * However, when the "young" bit is cleared, we deny access to the page * by clearing the hardware PTE. Currently Linux does not flush the TLB -- cgit v1.1