From 199f7978730a4bbd88038fd84212b30759579f1a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 9 Jan 2009 23:10:52 +0100 Subject: ALSA: wss-lib: move AD1845 frequency setting into wss-lib This is required to allow the sscape driver to autodetect installed codec. Also, do not create a timer if detected codec has no hardware timer (e.g. AD1848). Signed-off-by: Krzysztof Helt Cc: Rene Herman Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 113 ++++-------------------------------------------- sound/isa/wss/wss_lib.c | 40 +++++++++++++++++ 2 files changed, 48 insertions(+), 105 deletions(-) (limited to 'sound') diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 48a16d8..bc449166 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -129,9 +129,6 @@ enum GA_REG { #define DMA_8BIT 0x80 -#define AD1845_FREQ_SEL_MSB 0x16 -#define AD1845_FREQ_SEL_LSB 0x17 - enum card_type { SSCAPE, SSCAPE_PNP, @@ -955,82 +952,6 @@ static int __devinit create_mpu401(struct snd_card *card, int devnum, unsigned l /* - * Override for the CS4231 playback format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_playback_format(struct snd_wss *chip, - struct snd_pcm_hw_params *params, - unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the PLAYBACK_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (format & 0xf0)); - snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* - * Override for the CS4231 capture format function. - * The AD1845 has much simpler format and rate selection. - */ -static void ad1845_capture_format(struct snd_wss *chip, - struct snd_pcm_hw_params *params, - unsigned char format) -{ - unsigned long flags; - unsigned rate = params_rate(params); - - /* - * The AD1845 can't handle sample frequencies - * outside of 4 kHZ to 50 kHZ - */ - if (rate > 50000) - rate = 50000; - else if (rate < 4000) - rate = 4000; - - spin_lock_irqsave(&chip->reg_lock, flags); - - /* - * Program the AD1845 correctly for the playback stream. - * Note that we do NOT need to toggle the MCE bit because - * the CAPTURE_ENABLE bit of the Interface Configuration - * register is set. - * - * NOTE: We seem to need to write to the MSB before the LSB - * to get the correct sample frequency. - */ - snd_wss_out(chip, CS4231_REC_FORMAT, (format & 0xf0)); - snd_wss_out(chip, AD1845_FREQ_SEL_MSB, (unsigned char) (rate >> 8)); - snd_wss_out(chip, AD1845_FREQ_SEL_LSB, (unsigned char) rate); - - spin_unlock_irqrestore(&chip->reg_lock, flags); -} - -/* * Create an AD1845 PCM subdevice on the SoundScape. The AD1845 * is very much like a CS4231, with a few extra bits. We will * try to support at least some of the extra bits by overriding @@ -1055,11 +976,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, unsigned long flags; struct snd_pcm *pcm; -#define AD1845_FREQ_SEL_ENABLE 0x08 - -#define AD1845_PWR_DOWN_CTRL 0x1b -#define AD1845_CRYS_CLOCK_SEL 0x1d - /* * It turns out that the PLAYBACK_ENABLE bit is set * by the lowlevel driver ... @@ -1074,7 +990,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, */ if (sscape->type != SSCAPE_VIVO) { - int val; /* * The input clock frequency on the SoundScape must * be 14.31818 MHz, because we must set this register @@ -1082,22 +997,10 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, */ snd_wss_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, AD1845_CRYS_CLOCK_SEL, 0x20); + snd_wss_out(chip, AD1845_CLOCK, 0x20); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); - /* - * More custom configuration: - * a) select "mode 2" and provide a current drive of 8mA - * b) enable frequency selection (for capture/playback) - */ - spin_lock_irqsave(&chip->reg_lock, flags); - snd_wss_out(chip, CS4231_MISC_INFO, - CS4231_MODE2 | 0x10); - val = snd_wss_in(chip, AD1845_PWR_DOWN_CTRL); - snd_wss_out(chip, AD1845_PWR_DOWN_CTRL, - val | AD1845_FREQ_SEL_ENABLE); - spin_unlock_irqrestore(&chip->reg_lock, flags); } err = snd_wss_pcm(chip, 0, &pcm); @@ -1113,11 +1016,13 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, "for AD1845 chip\n"); goto _error; } - err = snd_wss_timer(chip, 0, NULL); - if (err < 0) { - snd_printk(KERN_ERR "sscape: No timer device " - "for AD1845 chip\n"); - goto _error; + if (chip->hardware != WSS_HW_AD1848) { + err = snd_wss_timer(chip, 0, NULL); + if (err < 0) { + snd_printk(KERN_ERR "sscape: No timer device " + "for AD1845 chip\n"); + goto _error; + } } if (sscape->type != SSCAPE_VIVO) { @@ -1128,8 +1033,6 @@ static int __devinit create_ad1845(struct snd_card *card, unsigned port, "MIDI mixer control\n"); goto _error; } - chip->set_playback_format = ad1845_playback_format; - chip->set_capture_format = ad1845_capture_format; } strcpy(card->driver, "SoundScape"); diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 3d6c5f2..13299ae 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -646,6 +646,24 @@ static void snd_wss_playback_format(struct snd_wss *chip, full_calib = 0; } spin_unlock_irqrestore(&chip->reg_lock, flags); + } else if (chip->hardware == WSS_HW_AD1845) { + unsigned rate = params_rate(params); + + /* + * Program the AD1845 correctly for the playback stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, CS4231_PLAYBK_FORMAT, (pdfr & 0xf0)); + snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff); + snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff); + full_calib = 0; + spin_unlock_irqrestore(&chip->reg_lock, flags); } if (full_calib) { snd_wss_mce_up(chip); @@ -690,6 +708,24 @@ static void snd_wss_capture_format(struct snd_wss *chip, full_calib = 0; } spin_unlock_irqrestore(&chip->reg_lock, flags); + } else if (chip->hardware == WSS_HW_AD1845) { + unsigned rate = params_rate(params); + + /* + * Program the AD1845 correctly for the capture stream. + * Note that we do NOT need to toggle the MCE bit because + * the PLAYBACK_ENABLE bit of the Interface Configuration + * register is set. + * + * NOTE: We seem to need to write to the MSB before the LSB + * to get the correct sample frequency. + */ + spin_lock_irqsave(&chip->reg_lock, flags); + snd_wss_out(chip, CS4231_REC_FORMAT, (cdfr & 0xf0)); + snd_wss_out(chip, AD1845_UPR_FREQ_SEL, (rate >> 8) & 0xff); + snd_wss_out(chip, AD1845_LWR_FREQ_SEL, rate & 0xff); + full_calib = 0; + spin_unlock_irqrestore(&chip->reg_lock, flags); } if (full_calib) { snd_wss_mce_up(chip); @@ -1314,6 +1350,10 @@ static int snd_wss_probe(struct snd_wss *chip) chip->image[CS4231_ALT_FEATURE_2] = chip->hardware == WSS_HW_INTERWAVE ? 0xc2 : 0x01; } + /* enable fine grained frequency selection */ + if (chip->hardware == WSS_HW_AD1845) + chip->image[AD1845_PWR_DOWN] = 8; + ptr = (unsigned char *) &chip->image; regnum = (chip->hardware & WSS_HW_AD1848_MASK) ? 16 : 32; snd_wss_mce_down(chip); -- cgit v1.1 From 554b91edec1c588b889a7357ff201c0a450e31ff Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Mon, 12 Jan 2009 21:25:04 +0100 Subject: ALSA: sscape: fix incorrect timeout after microcode upload A comment states that one should wait up to 5 secs while a waiting loop waits only 5 system ticks. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'sound') diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index bc449166..6a7f842 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -393,20 +393,20 @@ static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg, unsigned ti */ static int obp_startup_ack(struct soundscape *s, unsigned timeout) { - while (timeout != 0) { + unsigned long end_time = jiffies + msecs_to_jiffies(timeout); + + do { unsigned long flags; unsigned char x; - schedule_timeout_uninterruptible(1); - spin_lock_irqsave(&s->lock, flags); x = inb(HOST_DATA_IO(s->io_base)); spin_unlock_irqrestore(&s->lock, flags); if ((x & 0xfe) == 0xfe) return 1; - --timeout; - } /* while */ + msleep(10); + } while (time_before(jiffies, end_time)); return 0; } @@ -420,20 +420,20 @@ static int obp_startup_ack(struct soundscape *s, unsigned timeout) */ static int host_startup_ack(struct soundscape *s, unsigned timeout) { - while (timeout != 0) { + unsigned long end_time = jiffies + msecs_to_jiffies(timeout); + + do { unsigned long flags; unsigned char x; - schedule_timeout_uninterruptible(1); - spin_lock_irqsave(&s->lock, flags); x = inb(HOST_DATA_IO(s->io_base)); spin_unlock_irqrestore(&s->lock, flags); if (x == 0xfe) return 1; - --timeout; - } /* while */ + msleep(10); + } while (time_before(jiffies, end_time)); return 0; } @@ -529,10 +529,10 @@ static int upload_dma_data(struct soundscape *s, * give it 5 seconds (max) ... */ ret = 0; - if (!obp_startup_ack(s, 5)) { + if (!obp_startup_ack(s, 5000)) { snd_printk(KERN_ERR "sscape: No response from on-board processor after upload\n"); ret = -EAGAIN; - } else if (!host_startup_ack(s, 5)) { + } else if (!host_startup_ack(s, 5000)) { snd_printk(KERN_ERR "sscape: SoundScape failed to initialise\n"); ret = -EAGAIN; } -- cgit v1.1 From 9ef344f89ac41116d4ab138b0941c784a3ab8cf4 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Fri, 16 Jan 2009 22:47:30 +0100 Subject: ALSA: wss-lib: remove "pops" before each played sound A WSS codec is autocalibrated each time before playing sound. Do only one calibration during codec initialization. Complete snd_wss_calibrate_mute to mute loopback volume as well. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/wss/wss_lib.c | 41 +++++++++++++---------------------------- 1 file changed, 13 insertions(+), 28 deletions(-) (limited to 'sound') diff --git a/sound/isa/wss/wss_lib.c b/sound/isa/wss/wss_lib.c index 13299ae..f0c0be5 100644 --- a/sound/isa/wss/wss_lib.c +++ b/sound/isa/wss/wss_lib.c @@ -181,25 +181,6 @@ static void snd_wss_wait(struct snd_wss *chip) udelay(100); } -static void snd_wss_outm(struct snd_wss *chip, unsigned char reg, - unsigned char mask, unsigned char value) -{ - unsigned char tmp = (chip->image[reg] & mask) | value; - - snd_wss_wait(chip); -#ifdef CONFIG_SND_DEBUG - if (wss_inb(chip, CS4231P(REGSEL)) & CS4231_INIT) - snd_printk("outm: auto calibration time out - reg = 0x%x, value = 0x%x\n", reg, value); -#endif - chip->image[reg] = tmp; - if (!chip->calibrate_mute) { - wss_outb(chip, CS4231P(REGSEL), chip->mce_bit | reg); - wmb(); - wss_outb(chip, CS4231P(REG), tmp); - mb(); - } -} - static void snd_wss_dout(struct snd_wss *chip, unsigned char reg, unsigned char value) { @@ -587,7 +568,15 @@ static void snd_wss_calibrate_mute(struct snd_wss *chip, int mute) chip->image[CS4231_RIGHT_INPUT]); snd_wss_dout(chip, CS4231_LOOPBACK, chip->image[CS4231_LOOPBACK]); + } else { + snd_wss_dout(chip, CS4231_LEFT_INPUT, + 0); + snd_wss_dout(chip, CS4231_RIGHT_INPUT, + 0); + snd_wss_dout(chip, CS4231_LOOPBACK, + 0xfd); } + snd_wss_dout(chip, CS4231_AUX1_LEFT_INPUT, mute | chip->image[CS4231_AUX1_LEFT_INPUT]); snd_wss_dout(chip, CS4231_AUX1_RIGHT_INPUT, @@ -630,7 +619,6 @@ static void snd_wss_playback_format(struct snd_wss *chip, int full_calib = 1; mutex_lock(&chip->mce_mutex); - snd_wss_calibrate_mute(chip, 1); if (chip->hardware == WSS_HW_CS4231A || (chip->hardware & WSS_HW_CS4232_MASK)) { spin_lock_irqsave(&chip->reg_lock, flags); @@ -681,7 +669,6 @@ static void snd_wss_playback_format(struct snd_wss *chip, udelay(100); /* this seems to help */ snd_wss_mce_down(chip); } - snd_wss_calibrate_mute(chip, 0); mutex_unlock(&chip->mce_mutex); } @@ -693,7 +680,6 @@ static void snd_wss_capture_format(struct snd_wss *chip, int full_calib = 1; mutex_lock(&chip->mce_mutex); - snd_wss_calibrate_mute(chip, 1); if (chip->hardware == WSS_HW_CS4231A || (chip->hardware & WSS_HW_CS4232_MASK)) { spin_lock_irqsave(&chip->reg_lock, flags); @@ -750,7 +736,6 @@ static void snd_wss_capture_format(struct snd_wss *chip, spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); } - snd_wss_calibrate_mute(chip, 0); mutex_unlock(&chip->mce_mutex); } @@ -807,6 +792,7 @@ static void snd_wss_init(struct snd_wss *chip) { unsigned long flags; + snd_wss_calibrate_mute(chip, 1); snd_wss_mce_down(chip); #ifdef SNDRV_DEBUG_MCE @@ -830,6 +816,8 @@ static void snd_wss_init(struct snd_wss *chip) snd_wss_mce_up(chip); spin_lock_irqsave(&chip->reg_lock, flags); + chip->image[CS4231_IFACE_CTRL] &= ~CS4231_AUTOCALIB; + snd_wss_out(chip, CS4231_IFACE_CTRL, chip->image[CS4231_IFACE_CTRL]); snd_wss_out(chip, CS4231_ALT_FEATURE_1, chip->image[CS4231_ALT_FEATURE_1]); spin_unlock_irqrestore(&chip->reg_lock, flags); @@ -863,6 +851,7 @@ static void snd_wss_init(struct snd_wss *chip) chip->image[CS4231_REC_FORMAT]); spin_unlock_irqrestore(&chip->reg_lock, flags); snd_wss_mce_down(chip); + snd_wss_calibrate_mute(chip, 0); #ifdef SNDRV_DEBUG_MCE snd_printk("init: (5)\n"); @@ -921,8 +910,6 @@ static void snd_wss_close(struct snd_wss *chip, unsigned int mode) mutex_unlock(&chip->open_mutex); return; } - snd_wss_calibrate_mute(chip, 1); - /* disable IRQ */ spin_lock_irqsave(&chip->reg_lock, flags); if (!(chip->hardware & WSS_HW_AD1848_MASK)) @@ -955,8 +942,6 @@ static void snd_wss_close(struct snd_wss *chip, unsigned int mode) wss_outb(chip, CS4231P(STATUS), 0); /* clear IRQ */ spin_unlock_irqrestore(&chip->reg_lock, flags); - snd_wss_calibrate_mute(chip, 0); - chip->mode = 0; mutex_unlock(&chip->open_mutex); } @@ -1149,7 +1134,7 @@ irqreturn_t snd_wss_interrupt(int irq, void *dev_id) if (chip->hardware & WSS_HW_AD1848_MASK) wss_outb(chip, CS4231P(STATUS), 0); else - snd_wss_outm(chip, CS4231_IRQ_STATUS, status, 0); + snd_wss_out(chip, CS4231_IRQ_STATUS, status); spin_unlock(&chip->reg_lock); return IRQ_HANDLED; } -- cgit v1.1 From c9864fd30a28aceef5293f28559c4a2f5a20d7d5 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 21 Jan 2009 08:19:27 +0100 Subject: ALSA: sscape: use common MPU401 macros Remove local macros which redefines the common ones. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) (limited to 'sound') diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 6a7f842..681e223 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -89,9 +89,6 @@ MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids); #endif -#define MPU401_IO(i) ((i) + 0) -#define MIDI_DATA_IO(i) ((i) + 0) -#define MIDI_CTRL_IO(i) ((i) + 1) #define HOST_CTRL_IO(i) ((i) + 2) #define HOST_DATA_IO(i) ((i) + 3) #define ODIE_ADDR_IO(i) ((i) + 4) @@ -327,7 +324,7 @@ static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data, */ static inline int verify_mpu401(const struct snd_mpu401 * mpu) { - return ((inb(MIDI_CTRL_IO(mpu->port)) & 0xc0) == 0x80); + return ((inb(MPU401C(mpu)) & 0xc0) == 0x80); } /* @@ -335,7 +332,7 @@ static inline int verify_mpu401(const struct snd_mpu401 * mpu) */ static inline void initialise_mpu401(const struct snd_mpu401 * mpu) { - outb(0, MIDI_DATA_IO(mpu->port)); + outb(0, MPU401D(mpu)); } /* @@ -1191,12 +1188,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, - MPU401_IO(xport), mpu_irq[dev]); + err = create_mpu401(card, MIDI_DEVNUM, xport, mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " "MPU-401 device at 0x%x\n", - MPU401_IO(xport)); + xport); goto _release_dma; } -- cgit v1.1 From 56305757f0b64b7d5dd02fd54c6dfc0989868f31 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 29 Jan 2009 11:44:24 +0100 Subject: ALSA: sscape: update Kconfig description about SoundScape cards The SoundScape driver handles more cards then described. Signed-off-by: Takashi Iwai --- sound/isa/Kconfig | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'sound') diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index ce0aa04..542c1ea 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -377,14 +377,17 @@ config SND_SGALAXY will be called snd-sgalaxy. config SND_SSCAPE - tristate "Ensoniq SoundScape PnP driver" + tristate "Ensoniq SoundScape driver" select SND_HWDEP select SND_MPU401_UART select SND_WSS_LIB help - Say Y here to include support for Ensoniq SoundScape PnP + Say Y here to include support for Ensoniq SoundScape soundcards. + The PCM audio is supported on SoundScape Classic, Elite, PnP + and VIVO cards. The MIDI support is very experimental. + To compile this driver as a module, choose M here: the module will be called snd-sscape. -- cgit v1.1 From 453e37b37521b613f0927fcf53ccd93ad3a8b3ae Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Wed, 4 Feb 2009 17:41:32 +0100 Subject: ALSA: sscape: drop redundant fields from soundscape struct The wss_base is disuised parameter for one function. It is converted to function parameter. The code_type is only set but never read. It is removed. The midi_vol is set only to 0 so it does not work as detection of change in midi volume. It is fixed. The xport variable is alias to the port[dev]. Use the port[dev] directly to increase readability. Signed-off-by: Krzysztof Helt Signed-off-by: Takashi Iwai --- sound/isa/sscape.c | 44 ++++++++++++++++---------------------------- 1 file changed, 16 insertions(+), 28 deletions(-) (limited to 'sound') diff --git a/sound/isa/sscape.c b/sound/isa/sscape.c index 681e223..33c1258 100644 --- a/sound/isa/sscape.c +++ b/sound/isa/sscape.c @@ -135,8 +135,6 @@ enum card_type { struct soundscape { spinlock_t lock; unsigned io_base; - unsigned wss_base; - int codec_type; int ic_type; enum card_type type; struct resource *io_res; @@ -726,13 +724,7 @@ static int sscape_midi_get(struct snd_kcontrol *kctl, unsigned long flags; spin_lock_irqsave(&s->lock, flags); - set_host_mode_unsafe(s->io_base); - - if (host_write_ctrl_unsafe(s->io_base, CMD_GET_MIDI_VOL, 100)) { - uctl->value.integer.value[0] = host_read_ctrl_unsafe(s->io_base, 100); - } - - set_midi_mode_unsafe(s->io_base); + uctl->value.integer.value[0] = s->midi_vol; spin_unlock_irqrestore(&s->lock, flags); return 0; } @@ -767,6 +759,7 @@ static int sscape_midi_put(struct snd_kcontrol *kctl, change = (host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100) && host_write_ctrl_unsafe(s->io_base, ((unsigned char) uctl->value.integer. value[0]) & 127, 100) && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)); + s->midi_vol = (unsigned char) uctl->value.integer.value[0] & 127; __skip_change: /* @@ -809,12 +802,11 @@ static unsigned __devinit get_irq_config(int irq) * Perform certain arcane port-checks to see whether there * is a SoundScape board lurking behind the given ports. */ -static int __devinit detect_sscape(struct soundscape *s) +static int __devinit detect_sscape(struct soundscape *s, long wss_io) { unsigned long flags; unsigned d; int retval = 0; - int codec = s->wss_base; spin_lock_irqsave(&s->lock, flags); @@ -830,13 +822,11 @@ static int __devinit detect_sscape(struct soundscape *s) if ((d & 0x80) != 0) goto _done; - if (d == 0) { - s->codec_type = 1; + if (d == 0) s->ic_type = IC_ODIE; - } else if ((d & 0x60) != 0) { - s->codec_type = 2; + else if ((d & 0x60) != 0) s->ic_type = IC_OPUS; - } else + else goto _done; outb(0xfa, ODIE_ADDR_IO(s->io_base)); @@ -856,10 +846,10 @@ static int __devinit detect_sscape(struct soundscape *s) sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0); if (s->type == SSCAPE_VIVO) - codec += 4; + wss_io += 4; /* wait for WSS codec */ for (d = 0; d < 500; d++) { - if ((inb(codec) & 0x80) == 0) + if ((inb(wss_io) & 0x80) == 0) break; spin_unlock_irqrestore(&s->lock, flags); msleep(1); @@ -1057,7 +1047,6 @@ static int __devinit create_sscape(int dev, struct snd_card *card) unsigned dma_cfg; unsigned irq_cfg; unsigned mpu_irq_cfg; - unsigned xport; struct resource *io_res; struct resource *wss_res; unsigned long flags; @@ -1077,15 +1066,15 @@ static int __devinit create_sscape(int dev, struct snd_card *card) printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]); return -ENXIO; } - xport = port[dev]; /* * Grab IO ports that we will need to probe so that we * can detect and control this hardware ... */ - io_res = request_region(xport, 8, "SoundScape"); + io_res = request_region(port[dev], 8, "SoundScape"); if (!io_res) { - snd_printk(KERN_ERR "sscape: can't grab port 0x%x\n", xport); + snd_printk(KERN_ERR + "sscape: can't grab port 0x%lx\n", port[dev]); return -EBUSY; } wss_res = NULL; @@ -1112,10 +1101,9 @@ static int __devinit create_sscape(int dev, struct snd_card *card) spin_lock_init(&sscape->fwlock); sscape->io_res = io_res; sscape->wss_res = wss_res; - sscape->io_base = xport; - sscape->wss_base = wss_port[dev]; + sscape->io_base = port[dev]; - if (!detect_sscape(sscape)) { + if (!detect_sscape(sscape, wss_port[dev])) { printk(KERN_ERR "sscape: hardware not detected at 0x%x\n", sscape->io_base); err = -ENODEV; goto _release_dma; @@ -1188,11 +1176,11 @@ static int __devinit create_sscape(int dev, struct snd_card *card) } #define MIDI_DEVNUM 0 if (sscape->type != SSCAPE_VIVO) { - err = create_mpu401(card, MIDI_DEVNUM, xport, mpu_irq[dev]); + err = create_mpu401(card, MIDI_DEVNUM, port[dev], mpu_irq[dev]); if (err < 0) { printk(KERN_ERR "sscape: Failed to create " - "MPU-401 device at 0x%x\n", - xport); + "MPU-401 device at 0x%lx\n", + port[dev]); goto _release_dma; } -- cgit v1.1