/* * soc-jack.c -- ALSA SoC jack handling * * Copyright 2008 Wolfson Microelectronics PLC. * * Author: Mark Brown * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #ifdef CONFIG_JACK_MON #include #endif #include #include /* Android jack detection */ static struct switch_dev android_switch = { .name = "h2w", }; /** * snd_soc_jack_new - Create a new jack * @card: ASoC card * @id: an identifying string for this jack * @type: a bitmask of enum snd_jack_type values that can be detected by * this jack * @jack: structure to use for the jack * * Creates a new jack object. * * Returns zero if successful, or a negative error code on failure. * On success jack will be initialised. */ int snd_soc_jack_new(struct snd_soc_codec *codec, const char *id, int type, struct snd_soc_jack *jack) { jack->codec = codec; INIT_LIST_HEAD(&jack->pins); INIT_LIST_HEAD(&jack->jack_zones); BLOCKING_INIT_NOTIFIER_HEAD(&jack->notifier); switch_dev_register(&android_switch); return snd_jack_new(codec->card->snd_card, id, type, &jack->jack); } EXPORT_SYMBOL_GPL(snd_soc_jack_new); /** * snd_soc_jack_report - Report the current status for a jack * * @jack: the jack * @status: a bitmask of enum snd_jack_type values that are currently detected. * @mask: a bitmask of enum snd_jack_type values that being reported. * * If configured using snd_soc_jack_add_pins() then the associated * DAPM pins will be enabled or disabled as appropriate and DAPM * synchronised. * * Note: This function uses mutexes and should be called from a * context which can sleep (such as a workqueue). */ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) { struct snd_soc_codec *codec; struct snd_soc_dapm_context *dapm; struct snd_soc_jack_pin *pin; int enable; int oldstatus; if (mask & SND_JACK_HEADSET) { if (status & SND_JACK_MICROPHONE) switch_set_state(&android_switch, SEC_HEADSET_4POLE); else if (status & SND_JACK_HEADPHONE) switch_set_state(&android_switch, SEC_HEADSET_3POLE); else switch_set_state(&android_switch, SEC_JACK_NO_DEVICE); } #ifdef CONFIG_JACK_MON if (mask & SND_JACK_HEADSET) { if (status & SND_JACK_MICROPHONE) jack_event_handler("earjack", SND_JACK_HEADSET); else if (status & SND_JACK_HEADPHONE) jack_event_handler("earjack", SND_JACK_HEADPHONE); else jack_event_handler("earjack", 0); } #endif trace_snd_soc_jack_report(jack, mask, status); if (!jack) return; codec = jack->codec; dapm = &codec->dapm; mutex_lock(&codec->mutex); oldstatus = jack->status; jack->status &= ~mask; jack->status |= status & mask; /* The DAPM sync is expensive enough to be worth skipping. * However, empty mask means pin synchronization is desired. */ if (mask && (jack->status == oldstatus)) goto out; trace_snd_soc_jack_notify(jack, status); list_for_each_entry(pin, &jack->pins, list) { enable = pin->mask & jack->status; if (pin->invert) enable = !enable; if (enable) snd_soc_dapm_enable_pin(dapm, pin->pin); else snd_soc_dapm_disable_pin(dapm, pin->pin); } /* Report before the DAPM sync to help users updating micbias status */ blocking_notifier_call_chain(&jack->notifier, status, jack); snd_soc_dapm_sync(dapm); snd_jack_report(jack->jack, jack->status); out: mutex_unlock(&codec->mutex); } EXPORT_SYMBOL_GPL(snd_soc_jack_report); /** * snd_soc_jack_add_zones - Associate voltage zones with jack * * @jack: ASoC jack * @count: Number of zones * @zone: Array of zones * * After this function has been called the zones specified in the * array will be associated with the jack. */ int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count, struct snd_soc_jack_zone *zones) { int i; for (i = 0; i < count; i++) { INIT_LIST_HEAD(&zones[i].list); list_add(&(zones[i].list), &jack->jack_zones); } return 0; } EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones); /** * snd_soc_jack_get_type - Based on the mic bias value, this function returns * the type of jack from the zones delcared in the jack type * * @micbias_voltage: mic bias voltage at adc channel when jack is plugged in * * Based on the mic bias value passed, this function helps identify * the type of jack from the already delcared jack zones */ int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage) { struct snd_soc_jack_zone *zone; list_for_each_entry(zone, &jack->jack_zones, list) { if (micbias_voltage >= zone->min_mv && micbias_voltage < zone->max_mv) return zone->jack_type; } return 0; } EXPORT_SYMBOL_GPL(snd_soc_jack_get_type); /** * snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack * * @jack: ASoC jack * @count: Number of pins * @pins: Array of pins * * After this function has been called the DAPM pins specified in the * pins array will have their status updated to reflect the current * state of the jack whenever the jack status is updated. */ int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count, struct snd_soc_jack_pin *pins) { int i; for (i = 0; i < count; i++) { if (!pins[i].pin) { printk(KERN_ERR "No name for pin %d\n", i); return -EINVAL; } if (!pins[i].mask) { printk(KERN_ERR "No mask for pin %d (%s)\n", i, pins[i].pin); return -EINVAL; } INIT_LIST_HEAD(&pins[i].list); list_add(&(pins[i].list), &jack->pins); } /* Update to reflect the last reported status; canned jack * implementations are likely to set their state before the * card has an opportunity to associate pins. */ snd_soc_jack_report(jack, 0, 0); return 0; } EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins); /** * snd_soc_jack_notifier_register - Register a notifier for jack status * * @jack: ASoC jack * @nb: Notifier block to register * * Register for notification of the current status of the jack. Note * that it is not possible to report additional jack events in the * callback from the notifier, this is intended to support * applications such as enabling electrical detection only when a * mechanical detection event has occurred. */ void snd_soc_jack_notifier_register(struct snd_soc_jack *jack, struct notifier_block *nb) { blocking_notifier_chain_register(&jack->notifier, nb); } EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_register); /** * snd_soc_jack_notifier_unregister - Unregister a notifier for jack status * * @jack: ASoC jack * @nb: Notifier block to unregister * * Stop notifying for status changes. */ void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack, struct notifier_block *nb) { blocking_notifier_chain_unregister(&jack->notifier, nb); } EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_unregister); #ifdef CONFIG_GPIOLIB /* gpio detect */ static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio) { struct snd_soc_jack *jack = gpio->jack; int enable; int report; enable = gpio_get_value_cansleep(gpio->gpio); if (gpio->invert) enable = !enable; if (enable) report = gpio->report; else report = 0; if (gpio->jack_status_check) report = gpio->jack_status_check(); snd_soc_jack_report(jack, report, gpio->report); } /* irq handler for gpio pin */ static irqreturn_t gpio_handler(int irq, void *data) { struct snd_soc_jack_gpio *gpio = data; struct device *dev = gpio->jack->codec->card->dev; trace_snd_soc_jack_irq(gpio->name); if (device_may_wakeup(dev)) pm_wakeup_event(dev, gpio->debounce_time + 50); schedule_delayed_work(&gpio->work, msecs_to_jiffies(gpio->debounce_time)); return IRQ_HANDLED; } /* gpio work */ static void gpio_work(struct work_struct *work) { struct snd_soc_jack_gpio *gpio; gpio = container_of(work, struct snd_soc_jack_gpio, work.work); snd_soc_jack_gpio_detect(gpio); } /** * snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack * * @jack: ASoC jack * @count: number of pins * @gpios: array of gpio pins * * This function will request gpio, set data direction and request irq * for each gpio in the array. */ int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count, struct snd_soc_jack_gpio *gpios) { int i, ret; for (i = 0; i < count; i++) { if (!gpio_is_valid(gpios[i].gpio)) { printk(KERN_ERR "Invalid gpio %d\n", gpios[i].gpio); ret = -EINVAL; goto undo; } if (!gpios[i].name) { printk(KERN_ERR "No name for gpio %d\n", gpios[i].gpio); ret = -EINVAL; goto undo; } ret = gpio_request(gpios[i].gpio, gpios[i].name); if (ret) goto undo; ret = gpio_direction_input(gpios[i].gpio); if (ret) goto err; INIT_DELAYED_WORK(&gpios[i].work, gpio_work); gpios[i].jack = jack; ret = request_any_context_irq(gpio_to_irq(gpios[i].gpio), gpio_handler, IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, gpios[i].name, &gpios[i]); if (ret < 0) goto err; if (gpios[i].wake) { ret = irq_set_irq_wake(gpio_to_irq(gpios[i].gpio), 1); if (ret != 0) printk(KERN_ERR "Failed to mark GPIO %d as wake source: %d\n", gpios[i].gpio, ret); } #ifdef CONFIG_GPIO_SYSFS /* Expose GPIO value over sysfs for diagnostic purposes */ gpio_export(gpios[i].gpio, false); #endif /* Update initial jack status */ snd_soc_jack_gpio_detect(&gpios[i]); } return 0; err: gpio_free(gpios[i].gpio); undo: snd_soc_jack_free_gpios(jack, i, gpios); return ret; } EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios); /** * snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack * * @jack: ASoC jack * @count: number of pins * @gpios: array of gpio pins * * Release gpio and irq resources for gpio pins associated with an ASoC jack. */ void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count, struct snd_soc_jack_gpio *gpios) { int i; for (i = 0; i < count; i++) { #ifdef CONFIG_GPIO_SYSFS gpio_unexport(gpios[i].gpio); #endif free_irq(gpio_to_irq(gpios[i].gpio), &gpios[i]); cancel_delayed_work_sync(&gpios[i].work); gpio_free(gpios[i].gpio); gpios[i].jack = NULL; } } EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios); #endif /* CONFIG_GPIOLIB */