aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/gpio-omap.c1812
1 files changed, 642 insertions, 1170 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 35bebde..5aa0e19 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -28,19 +28,32 @@
#include <mach/gpio.h>
#include <asm/mach/irq.h>
+static LIST_HEAD(omap_gpio_list);
+
+struct gpio_regs {
+ u32 irqenable1;
+ u32 irqenable2;
+ u32 wake_en;
+ u32 ctrl;
+ u32 oe;
+ u32 leveldetect0;
+ u32 leveldetect1;
+ u32 risingdetect;
+ u32 fallingdetect;
+ u32 dataout;
+};
+
struct gpio_bank {
+ struct list_head node;
unsigned long pbase;
void __iomem *base;
u16 irq;
u16 virtual_irq_start;
- int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
u32 suspend_wakeup;
u32 saved_wakeup;
-#endif
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
-
+ struct gpio_regs context;
u32 saved_datain;
u32 saved_fallingdetect;
u32 saved_risingdetect;
@@ -52,148 +65,34 @@ struct gpio_bank {
u32 mod_usage;
u32 dbck_enable_mask;
struct device *dev;
+ bool is_mpuio;
bool dbck_flag;
+ bool loses_context;
+ bool suspend_support;
+ bool saved_context;
int stride;
-};
-
-#ifdef CONFIG_ARCH_OMAP3
-struct omap3_gpio_regs {
- u32 irqenable1;
- u32 irqenable2;
- u32 wake_en;
- u32 ctrl;
- u32 oe;
- u32 leveldetect0;
- u32 leveldetect1;
- u32 risingdetect;
- u32 fallingdetect;
- u32 dataout;
-};
-
-static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
-#endif
-
-/*
- * TODO: Cleanup gpio_bank usage as it is having information
- * related to all instances of the device
- */
-static struct gpio_bank *gpio_bank;
+ u32 width;
+ u32 ctx_loss_count;
+ u16 id;
-static int bank_width;
+ void (*set_dataout)(struct gpio_bank *bank, int gpio, int enable);
+ int (*get_context_loss_count)(struct device *dev);
-/* TODO: Analyze removing gpio_bank_count usage from driver code */
-int gpio_bank_count;
-
-static inline struct gpio_bank *get_gpio_bank(int gpio)
-{
- if (cpu_is_omap15xx()) {
- if (OMAP_GPIO_IS_MPUIO(gpio))
- return &gpio_bank[0];
- return &gpio_bank[1];
- }
- if (cpu_is_omap16xx()) {
- if (OMAP_GPIO_IS_MPUIO(gpio))
- return &gpio_bank[0];
- return &gpio_bank[1 + (gpio >> 4)];
- }
- if (cpu_is_omap7xx()) {
- if (OMAP_GPIO_IS_MPUIO(gpio))
- return &gpio_bank[0];
- return &gpio_bank[1 + (gpio >> 5)];
- }
- if (cpu_is_omap24xx())
- return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx() || cpu_is_omap44xx())
- return &gpio_bank[gpio >> 5];
- BUG();
- return NULL;
-}
-
-static inline int get_gpio_index(int gpio)
-{
- if (cpu_is_omap7xx())
- return gpio & 0x1f;
- if (cpu_is_omap24xx())
- return gpio & 0x1f;
- if (cpu_is_omap34xx() || cpu_is_omap44xx())
- return gpio & 0x1f;
- return gpio & 0x0f;
-}
+ struct omap_gpio_reg_offs *regs;
+};
-static inline int gpio_valid(int gpio)
-{
- if (gpio < 0)
- return -1;
- if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
- if (gpio >= OMAP_MAX_GPIO_LINES + 16)
- return -1;
- return 0;
- }
- if (cpu_is_omap15xx() && gpio < 16)
- return 0;
- if ((cpu_is_omap16xx()) && gpio < 64)
- return 0;
- if (cpu_is_omap7xx() && gpio < 192)
- return 0;
- if (cpu_is_omap2420() && gpio < 128)
- return 0;
- if (cpu_is_omap2430() && gpio < 160)
- return 0;
- if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
- return 0;
- return -1;
-}
+static void omap_gpio_mod_init(struct gpio_bank *bank);
-static int check_gpio(int gpio)
-{
- if (unlikely(gpio_valid(gpio) < 0)) {
- printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
- dump_stack();
- return -1;
- }
- return 0;
-}
+#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
+#define GPIO_BIT(bank, gpio) (1 << GPIO_INDEX(bank, gpio))
+#define GPIO_MOD_CTRL_BIT BIT(0)
static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
{
void __iomem *reg = bank->base;
u32 l;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DIR_CONTROL;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_OE;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
+ reg += bank->regs->direction;
l = __raw_readl(reg);
if (is_input)
l |= 1 << gpio;
@@ -202,165 +101,48 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
__raw_writel(l, reg);
}
-static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
+
+/* set data out value using dedicate set/clear register */
+static void _set_gpio_dataout_reg(struct gpio_bank *bank, int gpio, int enable)
{
void __iomem *reg = bank->base;
- u32 l = 0;
+ u32 l = GPIO_BIT(bank, gpio);
+
+ if (enable)
+ reg += bank->regs->set_dataout;
+ else
+ reg += bank->regs->clr_dataout;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_OUTPUT / bank->stride;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (enable)
- reg += OMAP1610_GPIO_SET_DATAOUT;
- else
- reg += OMAP1610_GPIO_CLEAR_DATAOUT;
- l = 1 << gpio;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_OUTPUT;
- l = __raw_readl(reg);
- if (enable)
- l |= 1 << gpio;
- else
- l &= ~(1 << gpio);
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- if (enable)
- reg += OMAP24XX_GPIO_SETDATAOUT;
- else
- reg += OMAP24XX_GPIO_CLEARDATAOUT;
- l = 1 << gpio;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- if (enable)
- reg += OMAP4_GPIO_SETDATAOUT;
- else
- reg += OMAP4_GPIO_CLEARDATAOUT;
- l = 1 << gpio;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
__raw_writel(l, reg);
}
-static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
+/* set data out value using mask register */
+static void _set_gpio_dataout_mask(struct gpio_bank *bank, int gpio, int enable)
{
- void __iomem *reg;
+ void __iomem *reg = bank->base + bank->regs->dataout;
+ u32 gpio_bit = GPIO_BIT(bank, gpio);
+ u32 l;
- if (check_gpio(gpio) < 0)
- return -EINVAL;
- reg = bank->base;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_INPUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DATAIN;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_INPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAIN;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_DATAIN;
- break;
-#endif
- default:
- return -EINVAL;
- }
- return (__raw_readl(reg)
- & (1 << get_gpio_index(gpio))) != 0;
+ l = __raw_readl(reg);
+ if (enable)
+ l |= gpio_bit;
+ else
+ l &= ~gpio_bit;
+ __raw_writel(l, reg);
}
-static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
{
- void __iomem *reg;
+ void __iomem *reg = bank->base + bank->regs->datain;
- if (check_gpio(gpio) < 0)
- return -EINVAL;
- reg = bank->base;
+ return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
+}
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_OUTPUT / bank->stride;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DATA_OUTPUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DATAOUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DATA_OUTPUT;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_DATAOUT;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_DATAOUT;
- break;
-#endif
- default:
- return -EINVAL;
- }
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+ void __iomem *reg = bank->base + bank->regs->dataout;
- return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+ return (__raw_readl(reg) & GPIO_BIT(bank, gpio)) != 0;
}
#define MOD_REG_BIT(reg, bit_mask, set) \
@@ -383,7 +165,7 @@ do { \
static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
unsigned debounce)
{
- void __iomem *reg = bank->base;
+ void __iomem *reg;
u32 val;
u32 l;
@@ -397,21 +179,12 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
else
debounce = (debounce / 0x1f) - 1;
- l = 1 << get_gpio_index(gpio);
-
- if (bank->method == METHOD_GPIO_44XX)
- reg += OMAP4_GPIO_DEBOUNCINGTIME;
- else
- reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+ l = GPIO_BIT(bank, gpio);
+ reg = bank->base + bank->regs->debounce;
__raw_writel(debounce, reg);
- reg = bank->base;
- if (bank->method == METHOD_GPIO_44XX)
- reg += OMAP4_GPIO_DEBOUNCENABLE;
- else
- reg += OMAP24XX_GPIO_DEBOUNCE_EN;
-
+ reg = bank->base + bank->regs->debounce_en;
val = __raw_readl(reg);
if (debounce) {
@@ -426,35 +199,24 @@ static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
__raw_writel(val, reg);
}
-#ifdef CONFIG_ARCH_OMAP2PLUS
-static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
+static inline void set_gpio_trigger(struct gpio_bank *bank, int gpio,
int trigger)
{
void __iomem *base = bank->base;
u32 gpio_bit = 1 << gpio;
- if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
+ MOD_REG_BIT(bank->regs->leveldetect0, gpio_bit,
trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
+ MOD_REG_BIT(bank->regs->leveldetect1, gpio_bit,
trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
+ MOD_REG_BIT(bank->regs->risingdetect, gpio_bit,
trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
+ MOD_REG_BIT(bank->regs->fallingdetect, gpio_bit,
trigger & IRQ_TYPE_EDGE_FALLING);
- } else {
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_LOW);
- MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
- trigger & IRQ_TYPE_LEVEL_HIGH);
- MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_RISING);
- MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
- trigger & IRQ_TYPE_EDGE_FALLING);
- }
+
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
if (cpu_is_omap44xx()) {
- MOD_REG_BIT(OMAP4_GPIO_IRQWAKEN0, gpio_bit,
+ MOD_REG_BIT(bank->regs->wkup_status, gpio_bit,
trigger != 0);
} else {
/*
@@ -463,10 +225,10 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
*/
if (trigger & IRQ_TYPE_EDGE_BOTH)
__raw_writel(1 << gpio, bank->base
- + OMAP24XX_GPIO_SETWKUENA);
+ + bank->regs->wkup_set);
else
__raw_writel(1 << gpio, bank->base
- + OMAP24XX_GPIO_CLEARWKUENA);
+ + bank->regs->wkup_clear);
}
}
/* This part needs to be executed always for OMAP{34xx, 44xx} */
@@ -484,17 +246,10 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
- if (cpu_is_omap44xx()) {
- bank->level_mask =
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
- } else {
- bank->level_mask =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- }
+ bank->level_mask =
+ __raw_readl(bank->base + bank->regs->leveldetect0) |
+ __raw_readl(bank->base + bank->regs->leveldetect1);
}
-#endif
#ifdef CONFIG_ARCH_OMAP1
/*
@@ -506,23 +261,10 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
void __iomem *reg = bank->base;
u32 l = 0;
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
- break;
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_CONTROL;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_CONTROL;
- break;
-#endif
- default:
+ if (!bank->regs->irqctrl)
return;
- }
+
+ reg += bank->regs->irqctrl;
l = __raw_readl(reg);
if ((l >> gpio) & 1)
@@ -539,24 +281,11 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
void __iomem *reg = bank->base;
u32 l = 0;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
- else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_CONTROL;
+ if (bank->regs->leveldetect0 && bank->regs->wkup_status) {
+ set_gpio_trigger(bank, gpio, trigger);
+ } else if (bank->regs->irqctrl) {
+ reg += bank->regs->irqctrl;
+
l = __raw_readl(reg);
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
@@ -565,15 +294,16 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
else if (trigger & IRQ_TYPE_EDGE_FALLING)
l &= ~(1 << gpio);
else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
+ return -EINVAL;
+
+ __raw_writel(l, reg);
+
+ } else if (bank->regs->edgectrl1) {
if (gpio & 0x08)
- reg += OMAP1610_GPIO_EDGE_CTRL2;
+ reg += bank->regs->edgectrl2;
else
- reg += OMAP1610_GPIO_EDGE_CTRL1;
+ reg += bank->regs->edgectrl1;
+
gpio &= 0x07;
l = __raw_readl(reg);
l &= ~(3 << (gpio << 1));
@@ -581,40 +311,19 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
l |= 2 << (gpio << 1);
if (trigger & IRQ_TYPE_EDGE_FALLING)
l |= 1 << (gpio << 1);
+
if (trigger)
/* Enable wake-up during idle for dynamic tick */
- __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
- else
- __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_CONTROL;
- l = __raw_readl(reg);
- if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
- bank->toggle_mask |= 1 << gpio;
- if (trigger & IRQ_TYPE_EDGE_RISING)
- l |= 1 << gpio;
- else if (trigger & IRQ_TYPE_EDGE_FALLING)
- l &= ~(1 << gpio);
+ __raw_writel(1 << gpio, bank->base
+ + bank->regs->wkup_set);
else
- goto bad;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
- set_24xx_gpio_triggering(bank, gpio, trigger);
- return 0;
-#endif
- default:
- goto bad;
+ __raw_writel(1 << gpio, bank->base
+ + bank->regs->wkup_clear);
+
+ __raw_writel(l, reg);
}
- __raw_writel(l, reg);
+
return 0;
-bad:
- return -EINVAL;
}
static int gpio_irq_type(struct irq_data *d, unsigned type)
@@ -629,20 +338,18 @@ static int gpio_irq_type(struct irq_data *d, unsigned type)
else
gpio = d->irq - IH_GPIO_BASE;
- if (check_gpio(gpio) < 0)
- return -EINVAL;
-
if (type & ~IRQ_TYPE_SENSE_MASK)
return -EINVAL;
- /* OMAP1 allows only only edge triggering */
- if (!cpu_class_is_omap2()
- && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
+ bank = irq_data_get_irq_chip_data(d);
+
+ /* OMAP1 allows only edge triggering */
+ if (!bank->regs->leveldetect0 && (type &
+ (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
return -EINVAL;
- bank = irq_data_get_irq_chip_data(d);
spin_lock_irqsave(&bank->lock, flags);
- retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
+ retval = _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), type);
spin_unlock_irqrestore(&bank->lock, flags);
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
@@ -657,195 +364,81 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
{
void __iomem *reg = bank->base;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- /* MPUIO irqstatus is reset by reading the status register,
- * so do nothing here */
- return;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_STATUS;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_IRQSTATUS1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_STATUS;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_IRQSTATUS1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_IRQSTATUS0;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
- }
+ reg += bank->regs->irqstatus;
__raw_writel(gpio_mask, reg);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
- else if (cpu_is_omap44xx())
- reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
+ if (bank->regs->irqstatus2) {
+ reg = bank->base + bank->regs->irqstatus2;
__raw_writel(gpio_mask, reg);
+ }
/* Flush posted write for the irq status to avoid spurious interrupts */
__raw_readl(reg);
- }
}
static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
{
- _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
+ _clear_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
}
static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
{
void __iomem *reg = bank->base;
- int inv = 0;
u32 l;
- u32 mask;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- mask = 0xffff;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_MASK;
- mask = 0xffff;
- inv = 1;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_IRQENABLE1;
- mask = 0xffff;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_MASK;
- mask = 0xffffffff;
- inv = 1;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_IRQENABLE1;
- mask = 0xffffffff;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_IRQSTATUSSET0;
- mask = 0xffffffff;
- break;
-#endif
- default:
- WARN_ON(1);
- return 0;
- }
+ u32 mask = (1 << bank->width) - 1;
+ reg += bank->regs->irqenable;
l = __raw_readl(reg);
- if (inv)
+ if (bank->regs->irqenable_inv)
l = ~l;
l &= mask;
return l;
}
-static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
+static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
{
void __iomem *reg = bank->base;
u32 l;
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
- l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
- l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_INT_MASK;
+ if (bank->regs->set_irqenable) {
+ reg += bank->regs->set_irqenable;
+ l = gpio_mask;
+ } else {
+ reg += bank->regs->irqenable;
l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
+ if (bank->regs->irqenable_inv)
+ l &= ~gpio_mask;
else
l |= gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- if (enable)
- reg += OMAP1610_GPIO_SET_IRQENABLE1;
- else
- reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
+ }
+
+ __raw_writel(l, reg);
+}
+
+static void _disable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
+{
+ void __iomem *reg = bank->base;
+ u32 l;
+
+ if (bank->regs->clr_irqenable) {
+ reg += bank->regs->clr_irqenable;
l = gpio_mask;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_INT_MASK;
+ } else {
+ reg += bank->regs->irqenable;
l = __raw_readl(reg);
- if (enable)
- l &= ~(gpio_mask);
- else
+ if (bank->regs->irqenable_inv)
l |= gpio_mask;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- if (enable)
- reg += OMAP24XX_GPIO_SETIRQENABLE1;
- else
- reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
- l = gpio_mask;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- if (enable)
- reg += OMAP4_GPIO_IRQSTATUSSET0;
else
- reg += OMAP4_GPIO_IRQSTATUSCLR0;
- l = gpio_mask;
- break;
-#endif
- default:
- WARN_ON(1);
- return;
+ l &= ~gpio_mask;
}
+
__raw_writel(l, reg);
}
static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
{
- _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
+ _enable_gpio_irqbank(bank, GPIO_BIT(bank, gpio));
}
/*
@@ -858,50 +451,32 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
*/
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
{
- unsigned long uninitialized_var(flags);
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_MPUIO:
- case METHOD_GPIO_1610:
- spin_lock_irqsave(&bank->lock, flags);
- if (enable)
- bank->suspend_wakeup |= (1 << gpio);
- else
- bank->suspend_wakeup &= ~(1 << gpio);
- spin_unlock_irqrestore(&bank->lock, flags);
- return 0;
-#endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
- case METHOD_GPIO_24XX:
- case METHOD_GPIO_44XX:
- if (bank->non_wakeup_gpios & (1 << gpio)) {
- printk(KERN_ERR "Unable to modify wakeup on "
- "non-wakeup GPIO%d\n",
- (bank - gpio_bank) * 32 + gpio);
- return -EINVAL;
- }
- spin_lock_irqsave(&bank->lock, flags);
- if (enable)
- bank->suspend_wakeup |= (1 << gpio);
- else
- bank->suspend_wakeup &= ~(1 << gpio);
- spin_unlock_irqrestore(&bank->lock, flags);
- return 0;
-#endif
- default:
- printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
- bank->method);
+ u32 gpio_bit = GPIO_BIT(bank, gpio);
+ unsigned long flags;
+
+ if (bank->non_wakeup_gpios & gpio_bit) {
+ dev_err(bank->dev,
+ "Unable to modify wakeup on non-wakeup GPIO%d\n", gpio);
return -EINVAL;
}
+
+ spin_lock_irqsave(&bank->lock, flags);
+ if (enable)
+ bank->suspend_wakeup |= gpio_bit;
+ else
+ bank->suspend_wakeup &= ~gpio_bit;
+
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ return 0;
}
static void _reset_gpio(struct gpio_bank *bank, int gpio)
{
- _set_gpio_direction(bank, get_gpio_index(gpio), 1);
+ _set_gpio_direction(bank, GPIO_INDEX(bank, gpio), 1);
_set_gpio_irqenable(bank, gpio, 0);
_clear_gpio_irqstatus(bank, gpio);
- _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+ _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
}
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -911,10 +486,8 @@ static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
struct gpio_bank *bank;
int retval;
- if (check_gpio(gpio) < 0)
- return -ENODEV;
bank = irq_data_get_irq_chip_data(d);
- retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
+ retval = _set_gpio_wakeup(bank, gpio, enable);
return retval;
}
@@ -925,37 +498,47 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
+ /*
+ * If this is the first gpio_request for the bank,
+ * enable the bank module.
+ */
+ if (!bank->mod_usage) {
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_get_sync failed\n",
+ __func__, bank->id);
+ spin_unlock_irqrestore(&bank->lock, flags);
+ return -EINVAL;
+ }
+
+ /* Initialize the gpio bank registers to init time value */
+ omap_gpio_mod_init(bank);
+ }
/* Set trigger to none. You need to enable the desired trigger with
* request_irq() or set_irq_type().
*/
_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
-#ifdef CONFIG_ARCH_OMAP15XX
- if (bank->method == METHOD_GPIO_1510) {
- void __iomem *reg;
+ if (bank->regs->pinctrl) {
+ void __iomem *reg = bank->base + bank->regs->pinctrl;
/* Claim the pin for MPU */
- reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
}
-#endif
- if (!cpu_class_is_omap1()) {
- if (!bank->mod_usage) {
- void __iomem *reg = bank->base;
- u32 ctrl;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg += OMAP24XX_GPIO_CTRL;
- else if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_CTRL;
- ctrl = __raw_readl(reg);
- /* Module is enabled, clocks are not gated */
- ctrl &= 0xFFFFFFFE;
- __raw_writel(ctrl, reg);
- }
- bank->mod_usage |= 1 << offset;
+
+ if (bank->regs->ctrl && !bank->mod_usage) {
+ void __iomem *reg = bank->base + bank->regs->ctrl;
+ u32 ctrl;
+
+ ctrl = __raw_readl(reg);
+ /* Module is enabled, clocks are not gated */
+ ctrl &= ~GPIO_MOD_CTRL_BIT;
+ __raw_writel(ctrl, reg);
}
+
+ bank->mod_usage |= 1 << offset;
+
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@@ -967,44 +550,36 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
-#ifdef CONFIG_ARCH_OMAP16XX
- if (bank->method == METHOD_GPIO_1610) {
- /* Disable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- __raw_writel(1 << offset, reg);
- }
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (bank->method == METHOD_GPIO_24XX) {
- /* Disable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
- __raw_writel(1 << offset, reg);
- }
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- if (bank->method == METHOD_GPIO_44XX) {
+
+ if (bank->regs->wkup_clear)
/* Disable wake-up during idle for dynamic tick */
- void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
- __raw_writel(1 << offset, reg);
+ __raw_writel(1 << offset, bank->base + bank->regs->wkup_clear);
+
+ bank->mod_usage &= ~(1 << offset);
+
+ if (bank->regs->ctrl && !bank->mod_usage) {
+ void __iomem *reg = bank->base + bank->regs->ctrl;
+ u32 ctrl;
+
+ ctrl = __raw_readl(reg);
+ /* Module is disabled, clocks are gated */
+ ctrl |= GPIO_MOD_CTRL_BIT;
+ __raw_writel(ctrl, reg);
}
-#endif
- if (!cpu_class_is_omap1()) {
- bank->mod_usage &= ~(1 << offset);
- if (!bank->mod_usage) {
- void __iomem *reg = bank->base;
- u32 ctrl;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx())
- reg += OMAP24XX_GPIO_CTRL;
- else if (cpu_is_omap44xx())
- reg += OMAP4_GPIO_CTRL;
- ctrl = __raw_readl(reg);
- /* Module is disabled, clocks are gated */
- ctrl |= 1;
- __raw_writel(ctrl, reg);
+
+ _reset_gpio(bank, bank->chip.base + offset);
+
+ /*
+ * If this is the last gpio to be freed in the bank,
+ * disable the bank module.
+ */
+ if (!bank->mod_usage) {
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_put_sync failed\n",
+ __func__, bank->id);
}
}
- _reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -1030,31 +605,10 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
chained_irq_enter(chip, desc);
bank = irq_get_handler_data(irq);
-#ifdef CONFIG_ARCH_OMAP1
- if (bank->method == METHOD_MPUIO)
- isr_reg = bank->base +
- OMAP_MPUIO_GPIO_INT / bank->stride;
-#endif
-#ifdef CONFIG_ARCH_OMAP15XX
- if (bank->method == METHOD_GPIO_1510)
- isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP16XX)
- if (bank->method == METHOD_GPIO_1610)
- isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
- if (bank->method == METHOD_GPIO_7XX)
- isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- if (bank->method == METHOD_GPIO_24XX)
- isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
- if (bank->method == METHOD_GPIO_44XX)
- isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
-#endif
+
+ pm_runtime_get_sync(bank->dev);
+
+ isr_reg = bank->base + bank->regs->irqstatus;
if (WARN_ON(!isr_reg))
goto exit;
@@ -1064,21 +618,22 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
u32 enabled;
enabled = _get_gpio_irqbank_mask(bank);
- isr_saved = isr = __raw_readl(isr_reg) & enabled;
- if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
- isr &= 0x0000ffff;
+ if (bank->width == 32)
+ isr = __raw_readl(isr_reg) & enabled;
+ else if (bank->width == 16)
+ isr = (__raw_readw(isr_reg) & enabled) & 0x0000ffff;
+ isr_saved = isr;
- if (cpu_class_is_omap2()) {
+ if (bank->regs->leveldetect0)
level_mask = bank->level_mask & enabled;
- }
/* clear edge sensitive interrupts before handler(s) are
called so that we don't miss any interrupt occurred while
executing them */
- _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
+ _disable_gpio_irqbank(bank, isr_saved & ~level_mask);
_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
- _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
+ _enable_gpio_irqbank(bank, isr_saved & ~level_mask);
/* if there is only edge sensitive GPIO pin interrupts
configured, we could unmask GPIO bank interrupt immediately */
@@ -1094,7 +649,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
gpio_irq = bank->virtual_irq_start;
for (; isr != 0; isr >>= 1, gpio_irq++) {
- gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+ gpio_index = GPIO_INDEX(bank, irq_to_gpio(gpio_irq));
if (!(isr & 1))
continue;
@@ -1121,6 +676,8 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
exit:
if (!unmasked)
chained_irq_exit(chip, desc);
+
+ pm_runtime_put_sync_suspend(bank->dev);
}
static void gpio_irq_shutdown(struct irq_data *d)
@@ -1150,7 +707,7 @@ static void gpio_mask_irq(struct irq_data *d)
spin_lock_irqsave(&bank->lock, flags);
_set_gpio_irqenable(bank, gpio, 0);
- _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
+ _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), IRQ_TYPE_NONE);
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -1158,13 +715,13 @@ static void gpio_unmask_irq(struct irq_data *d)
{
unsigned int gpio = d->irq - IH_GPIO_BASE;
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
- unsigned int irq_mask = 1 << get_gpio_index(gpio);
+ unsigned int irq_mask = GPIO_BIT(bank, gpio);
u32 trigger = irqd_get_trigger_type(d);
unsigned long flags;
spin_lock_irqsave(&bank->lock, flags);
if (trigger)
- _set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
+ _set_gpio_triggering(bank, GPIO_INDEX(bank, gpio), trigger);
/* For level-triggered GPIOs, the clearing must be done after
* the HW source is cleared, thus after the handler has run */
@@ -1188,52 +745,6 @@ static struct irq_chip gpio_irq_chip = {
};
/*---------------------------------------------------------------------*/
-
-#ifdef CONFIG_ARCH_OMAP1
-
-/* MPUIO uses the always-on 32k clock */
-
-static void mpuio_ack_irq(struct irq_data *d)
-{
- /* The ISR is reset automatically, so do nothing here. */
-}
-
-static void mpuio_mask_irq(struct irq_data *d)
-{
- unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _set_gpio_irqenable(bank, gpio, 0);
-}
-
-static void mpuio_unmask_irq(struct irq_data *d)
-{
- unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
- struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
-
- _set_gpio_irqenable(bank, gpio, 1);
-}
-
-static struct irq_chip mpuio_irq_chip = {
- .name = "MPUIO",
- .irq_ack = mpuio_ack_irq,
- .irq_mask = mpuio_mask_irq,
- .irq_unmask = mpuio_unmask_irq,
- .irq_set_type = gpio_irq_type,
-#ifdef CONFIG_ARCH_OMAP16XX
- /* REVISIT: assuming only 16xx supports MPUIO wake events */
- .irq_set_wake = gpio_wake_enable,
-#endif
-};
-
-
-#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
-
-
-#ifdef CONFIG_ARCH_OMAP16XX
-
-#include <linux/platform_device.h>
-
static int omap_mpuio_suspend_noirq(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1287,34 +798,16 @@ static struct platform_device omap_mpuio_device = {
/* could list the /proc/iomem resources */
};
-static inline void mpuio_init(void)
+static inline void mpuio_init(struct gpio_bank *bank)
{
- struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
platform_set_drvdata(&omap_mpuio_device, bank);
if (platform_driver_register(&omap_mpuio_driver) == 0)
(void) platform_device_register(&omap_mpuio_device);
}
-#else
-static inline void mpuio_init(void) {}
-#endif /* 16xx */
-
-#else
-
-extern struct irq_chip mpuio_irq_chip;
-
-#define bank_is_mpuio(bank) 0
-static inline void mpuio_init(void) {}
-
-#endif
-
/*---------------------------------------------------------------------*/
-/* REVISIT these are stupid implementations! replace by ones that
- * don't switch on METHOD_* and which mostly avoid spinlocks
- */
-
static int gpio_input(struct gpio_chip *chip, unsigned offset)
{
struct gpio_bank *bank;
@@ -1329,31 +822,8 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
static int gpio_is_input(struct gpio_bank *bank, int mask)
{
- void __iomem *reg = bank->base;
+ void __iomem *reg = bank->base + bank->regs->direction;
- switch (bank->method) {
- case METHOD_MPUIO:
- reg += OMAP_MPUIO_IO_CNTL / bank->stride;
- break;
- case METHOD_GPIO_1510:
- reg += OMAP1510_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_1610:
- reg += OMAP1610_GPIO_DIRECTION;
- break;
- case METHOD_GPIO_7XX:
- reg += OMAP7XX_GPIO_DIR_CONTROL;
- break;
- case METHOD_GPIO_24XX:
- reg += OMAP24XX_GPIO_OE;
- break;
- case METHOD_GPIO_44XX:
- reg += OMAP4_GPIO_OE;
- break;
- default:
- WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
- return -EINVAL;
- }
return __raw_readl(reg) & mask;
}
@@ -1365,9 +835,9 @@ static int gpio_get(struct gpio_chip *chip, unsigned offset)
u32 mask;
gpio = chip->base + offset;
- bank = get_gpio_bank(gpio);
+ bank = container_of(chip, struct gpio_bank, chip);
reg = bank->base;
- mask = 1 << get_gpio_index(gpio);
+ mask = GPIO_BIT(bank, gpio);
if (gpio_is_input(bank, mask))
return _get_gpio_datain(bank, gpio);
@@ -1382,7 +852,7 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
bank = container_of(chip, struct gpio_bank, chip);
spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_dataout(bank, offset, value);
+ bank->set_dataout(bank, offset, value);
_set_gpio_direction(bank, offset, 0);
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@@ -1416,7 +886,7 @@ static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
bank = container_of(chip, struct gpio_bank, chip);
spin_lock_irqsave(&bank->lock, flags);
- _set_gpio_dataout(bank, offset, value);
+ bank->set_dataout(bank, offset, value);
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -1432,19 +902,17 @@ static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
static void __init omap_gpio_show_rev(struct gpio_bank *bank)
{
+ static bool called;
u32 rev;
- if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
- rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
- else if (cpu_is_omap24xx() || cpu_is_omap34xx())
- rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
- else if (cpu_is_omap44xx())
- rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
- else
+ if (called || bank->regs->revision == USHRT_MAX)
return;
- printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+ rev = __raw_readw(bank->base + bank->regs->revision);
+ pr_info("OMAP GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
+
+ called = true;
}
/* This lock class tells lockdep that GPIO irqs are in a different
@@ -1452,63 +920,94 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank)
*/
static struct lock_class_key gpio_lock_class;
-static inline int init_gpio_info(struct platform_device *pdev)
+static void omap_gpio_mod_init(struct gpio_bank *bank)
{
- /* TODO: Analyze removing gpio_bank_count usage from driver code */
- gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
- GFP_KERNEL);
- if (!gpio_bank) {
- dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
- return -ENOMEM;
- }
- return 0;
-}
+ if (bank->width == 32) {
+ u32 clr_all = 0; /* clear all the bits */
+ u32 set_all = 0xFFFFFFFF; /* set all the bits */
-/* TODO: Cleanup cpu_is_* checks */
-static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
-{
- if (cpu_class_is_omap2()) {
- if (cpu_is_omap44xx()) {
- __raw_writel(0xffffffff, bank->base +
- OMAP4_GPIO_IRQSTATUSCLR0);
- __raw_writel(0x00000000, bank->base +
- OMAP4_GPIO_DEBOUNCENABLE);
- /* Initialize interface clk ungated, module enabled */
- __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
- } else if (cpu_is_omap34xx()) {
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(0xffffffff, bank->base +
- OMAP24XX_GPIO_IRQSTATUS1);
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_DEBOUNCE_EN);
+ if (bank->is_mpuio) {
+ __raw_writel(set_all, bank->base +
+ bank->regs->irqenable);
+
+ if (bank->suspend_support)
+ mpuio_init(bank);
+
+ return;
+ }
+ if (bank->regs->ctrl)
/* Initialize interface clk ungated, module enabled */
- __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
- } else if (cpu_is_omap24xx()) {
- static const u32 non_wakeup_gpios[] = {
- 0xe203ffc0, 0x08700040
- };
- if (id < ARRAY_SIZE(non_wakeup_gpios))
- bank->non_wakeup_gpios = non_wakeup_gpios[id];
+ __raw_writel(clr_all, bank->base + bank->regs->ctrl);
+
+ if (bank->regs->clr_irqenable) {
+ __raw_writel(set_all, bank->base +
+ bank->regs->clr_irqenable);
+ } else if (bank->regs->irqenable) {
+ u32 i;
+
+ if (bank->regs->irqenable_inv)
+ i = set_all;
+ else
+ i = clr_all;
+
+ __raw_writel(i, bank->base + bank->regs->irqenable);
}
- } else if (cpu_class_is_omap1()) {
- if (bank_is_mpuio(bank))
- __raw_writew(0xffff, bank->base +
- OMAP_MPUIO_GPIO_MASKIT / bank->stride);
- if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
- __raw_writew(0xffff, bank->base
- + OMAP1510_GPIO_INT_MASK);
- __raw_writew(0x0000, bank->base
- + OMAP1510_GPIO_INT_STATUS);
+
+ if (bank->regs->irqstatus) {
+ u32 i;
+
+ if (bank->regs->irqenable_inv)
+ i = clr_all;
+ else
+ i = set_all;
+
+ __raw_writel(i, bank->base + bank->regs->irqstatus);
+ }
+
+ if (bank->regs->debounce_en)
+ __raw_writel(clr_all, bank->base +
+ bank->regs->debounce_en);
+
+ } else if (bank->width == 16) {
+ u16 clr_all = 0; /* clear all the bits */
+ u16 set_all = 0xFFFF; /* set all the bits */
+
+ if (bank->is_mpuio) {
+ __raw_writew(set_all, bank->base +
+ bank->regs->irqenable);
+
+ if (bank->suspend_support)
+ mpuio_init(bank);
+
+ return;
+ }
+
+ if (bank->regs->irqenable) {
+ u16 i;
+
+ if (bank->regs->irqenable_inv)
+ i = set_all;
+ else
+ i = clr_all;
+
+ __raw_writew(i, bank->base + bank->regs->irqenable);
+ }
+
+ if (bank->regs->irqstatus) {
+ u32 i;
+
+ if (bank->regs->irqenable_inv)
+ i = clr_all;
+ else
+ i = set_all;
+
+ __raw_writew(i, bank->base + bank->regs->irqstatus);
}
- if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
- __raw_writew(0x0000, bank->base
- + OMAP1610_GPIO_IRQENABLE1);
- __raw_writew(0xffff, bank->base
- + OMAP1610_GPIO_IRQSTATUS1);
- __raw_writew(0x0014, bank->base
- + OMAP1610_GPIO_SYSCONFIG);
+
+ if (bank->regs->sysconfig) {
+ /* set wakeup-enable and smart-idle */
+ __raw_writew(0x14, bank->base + bank->regs->sysconfig);
/*
* Enable system clock for GPIO module.
@@ -1517,15 +1016,38 @@ static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
ULPD_CAM_CLK_CTRL);
}
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
- __raw_writel(0xffffffff, bank->base
- + OMAP7XX_GPIO_INT_MASK);
- __raw_writel(0x00000000, bank->base
- + OMAP7XX_GPIO_INT_STATUS);
- }
}
}
+static __init void
+omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
+ unsigned int num)
+{
+ struct irq_chip_generic *gc;
+ struct irq_chip_type *ct;
+
+ gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
+ handle_simple_irq);
+ if (!gc) {
+ dev_err(bank->dev, "Memory alloc failed for gc\n");
+ return;
+ }
+
+ ct = gc->chip_types;
+
+ /* NOTE: No ack required, reading IRQ status clears it. */
+ ct->chip.irq_mask = irq_gc_mask_set_bit;
+ ct->chip.irq_unmask = irq_gc_mask_clr_bit;
+ ct->chip.irq_set_type = gpio_irq_type;
+
+ if (bank->suspend_support)
+ ct->chip.irq_set_wake = gpio_wake_enable,
+
+ ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
+ irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
+ IRQ_NOREQUEST | IRQ_NOPROBE, 0);
+}
+
static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
{
int j;
@@ -1544,31 +1066,31 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
bank->chip.set_debounce = gpio_debounce;
bank->chip.set = gpio_set;
bank->chip.to_irq = gpio_2irq;
- if (bank_is_mpuio(bank)) {
+ if (bank->is_mpuio) {
bank->chip.label = "mpuio";
-#ifdef CONFIG_ARCH_OMAP16XX
- bank->chip.dev = &omap_mpuio_device.dev;
-#endif
+ if (bank->suspend_support)
+ bank->chip.dev = &omap_mpuio_device.dev;
bank->chip.base = OMAP_MPUIO(0);
} else {
bank->chip.label = "gpio";
bank->chip.base = gpio;
- gpio += bank_width;
+ gpio += bank->width;
}
- bank->chip.ngpio = bank_width;
+ bank->chip.ngpio = bank->width;
gpiochip_add(&bank->chip);
for (j = bank->virtual_irq_start;
- j < bank->virtual_irq_start + bank_width; j++) {
+ j < bank->virtual_irq_start + bank->width; j++) {
irq_set_lockdep_class(j, &gpio_lock_class);
irq_set_chip_data(j, bank);
- if (bank_is_mpuio(bank))
- irq_set_chip(j, &mpuio_irq_chip);
- else
+ if (bank->is_mpuio) {
+ omap_mpuio_alloc_gc(bank, j, bank->width);
+ } else {
irq_set_chip(j, &gpio_irq_chip);
- irq_set_handler(j, handle_simple_irq);
- set_irq_flags(j, IRQF_VALID);
+ irq_set_handler(j, handle_simple_irq);
+ set_irq_flags(j, IRQF_VALID);
+ }
}
irq_set_chained_handler(bank->irq, gpio_irq_handler);
irq_set_handler_data(bank->irq, bank);
@@ -1576,410 +1098,373 @@ static void __devinit omap_gpio_chip_init(struct gpio_bank *bank)
static int __devinit omap_gpio_probe(struct platform_device *pdev)
{
- static int gpio_init_done;
struct omap_gpio_platform_data *pdata;
struct resource *res;
- int id;
struct gpio_bank *bank;
+ int ret = 0;
- if (!pdev->dev.platform_data)
- return -EINVAL;
-
- pdata = pdev->dev.platform_data;
-
- if (!gpio_init_done) {
- int ret;
-
- ret = init_gpio_info(pdev);
- if (ret)
- return ret;
+ if (!pdev->dev.platform_data) {
+ ret = -EINVAL;
+ goto err_exit;
}
- id = pdev->id;
- bank = &gpio_bank[id];
+ bank = kzalloc(sizeof(struct gpio_bank), GFP_KERNEL);
+ if (!bank) {
+ dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
+ ret = -ENOMEM;
+ goto err_exit;
+ }
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (unlikely(!res)) {
- dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
- return -ENODEV;
+ dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n",
+ pdev->id);
+ ret = -ENODEV;
+ goto err_free;
}
bank->irq = res->start;
+ bank->id = pdev->id;
+
+ pdata = pdev->dev.platform_data;
bank->virtual_irq_start = pdata->virtual_irq_start;
- bank->method = pdata->bank_type;
bank->dev = &pdev->dev;
bank->dbck_flag = pdata->dbck_flag;
bank->stride = pdata->bank_stride;
- bank_width = pdata->bank_width;
+ bank->width = pdata->bank_width;
+ bank->is_mpuio = pdata->is_mpuio;
+ bank->suspend_support = pdata->suspend_support;
+ bank->non_wakeup_gpios = pdata->non_wakeup_gpios;
+ bank->loses_context = pdata->loses_context;
+ bank->regs = pdata->regs;
+ bank->get_context_loss_count = pdata->get_context_loss_count;
+ bank->saved_context = 0;
+ if (bank->regs->set_dataout && bank->regs->clr_dataout)
+ bank->set_dataout = _set_gpio_dataout_reg;
+ else
+ bank->set_dataout = _set_gpio_dataout_mask;
spin_lock_init(&bank->lock);
/* Static mapping, never released */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (unlikely(!res)) {
- dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
- return -ENODEV;
+ dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n",
+ pdev->id);
+ ret = -ENODEV;
+ goto err_free;
}
bank->base = ioremap(res->start, resource_size(res));
if (!bank->base) {
- dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
- return -ENOMEM;
+ dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n",
+ pdev->id);
+ ret = -ENOMEM;
+ goto err_free;
}
+ platform_set_drvdata(pdev, bank);
+
pm_runtime_enable(bank->dev);
- pm_runtime_get_sync(bank->dev);
+ pm_runtime_irq_safe(bank->dev);
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_get_sync "
+ "failed\n", __func__, bank->id);
+ iounmap(bank->base);
+ return -EINVAL;
+ }
- omap_gpio_mod_init(bank, id);
+ omap_gpio_mod_init(bank);
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
- if (!gpio_init_done)
- gpio_init_done = 1;
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_put_sync "
+ "failed\n", __func__, bank->id);
+ iounmap(bank->base);
+ return -EINVAL;
+ }
- return 0;
+ list_add_tail(&bank->node, &omap_gpio_list);
+
+ return ret;
+
+err_free:
+ kfree(bank);
+err_exit:
+ return ret;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
-static int omap_gpio_suspend(void)
+static int omap_gpio_suspend(struct device *dev)
{
- int i;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ void __iomem *wake_status;
+ void __iomem *wake_clear;
+ void __iomem *wake_set;
+ unsigned long flags;
- if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
+ if (!bank->suspend_support)
return 0;
- for (i = 0; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- void __iomem *wake_status;
- void __iomem *wake_clear;
- void __iomem *wake_set;
- unsigned long flags;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
- wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
- wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
- wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
- wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
- wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
- break;
-#endif
- default:
- continue;
- }
+ wake_status = bank->base + bank->regs->wkup_status;
+ wake_clear = bank->base + bank->regs->wkup_clear;
+ wake_set = bank->base + bank->regs->wkup_set;
- spin_lock_irqsave(&bank->lock, flags);
- bank->saved_wakeup = __raw_readl(wake_status);
- __raw_writel(0xffffffff, wake_clear);
- __raw_writel(bank->suspend_wakeup, wake_set);
- spin_unlock_irqrestore(&bank->lock, flags);
- }
+ pm_runtime_get_sync(dev);
+
+ spin_lock_irqsave(&bank->lock, flags);
+ bank->saved_wakeup = __raw_readl(wake_status);
+ __raw_writel(0xffffffff, wake_clear);
+ __raw_writel(bank->suspend_wakeup, wake_set);
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ pm_runtime_put_sync(dev);
return 0;
}
-static void omap_gpio_resume(void)
+static int omap_gpio_resume(struct device *dev)
{
- int i;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ void __iomem *wake_clear;
+ void __iomem *wake_set;
+ unsigned long flags;
- if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
- return;
+ if (!bank->suspend_support)
+ return 0;
- for (i = 0; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- void __iomem *wake_clear;
- void __iomem *wake_set;
- unsigned long flags;
-
- switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP16XX
- case METHOD_GPIO_1610:
- wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
- wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
- break;
-#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- case METHOD_GPIO_24XX:
- wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
- wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
- break;
-#endif
-#ifdef CONFIG_ARCH_OMAP4
- case METHOD_GPIO_44XX:
- wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
- wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
- break;
-#endif
- default:
- continue;
- }
+ wake_clear = bank->base + bank->regs->wkup_clear;
+ wake_set = bank->base + bank->regs->wkup_set;
- spin_lock_irqsave(&bank->lock, flags);
- __raw_writel(0xffffffff, wake_clear);
- __raw_writel(bank->saved_wakeup, wake_set);
- spin_unlock_irqrestore(&bank->lock, flags);
- }
-}
+ pm_runtime_get_sync(dev);
-static struct syscore_ops omap_gpio_syscore_ops = {
- .suspend = omap_gpio_suspend,
- .resume = omap_gpio_resume,
-};
+ spin_lock_irqsave(&bank->lock, flags);
+ __raw_writel(0xffffffff, wake_clear);
+ __raw_writel(bank->saved_wakeup, wake_set);
+ spin_unlock_irqrestore(&bank->lock, flags);
+
+ pm_runtime_put_sync(dev);
+
+ return 0;
+}
+#ifdef CONFIG_ARCH_OMAP2PLUS
+static void omap_gpio_save_context(struct gpio_bank *bank);
+static void omap_gpio_restore_context(struct gpio_bank *bank);
#endif
+static int omap_gpio_pm_runtime_suspend(struct device *dev)
+{
#ifdef CONFIG_ARCH_OMAP2PLUS
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ u32 l1 = 0, l2 = 0;
+ int j;
-static int workaround_enabled;
+ for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+ clk_disable(bank->dbck);
-void omap2_gpio_prepare_for_idle(int off_mode)
-{
- int i, c = 0;
- int min = 0;
+ /* If going to OFF, remove triggering for all
+ * non-wakeup GPIOs. Otherwise spurious IRQs will be
+ * generated. See OMAP2420 Errata item 1.101. */
+ if (!(bank->enabled_non_wakeup_gpios))
+ goto save_gpio_ctx;
- if (cpu_is_omap34xx())
- min = 1;
+ bank->saved_datain = __raw_readl(bank->base +
+ bank->regs->datain);
+ l1 = __raw_readl(bank->base + bank->regs->fallingdetect);
+ l2 = __raw_readl(bank->base + bank->regs->risingdetect);
- for (i = min; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- u32 l1 = 0, l2 = 0;
- int j;
+ bank->saved_fallingdetect = l1;
+ bank->saved_risingdetect = l2;
+ l1 &= ~bank->enabled_non_wakeup_gpios;
+ l2 &= ~bank->enabled_non_wakeup_gpios;
- for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
- clk_disable(bank->dbck);
+ __raw_writel(l1, bank->base + bank->regs->fallingdetect);
+ __raw_writel(l2, bank->base + bank->regs->risingdetect);
- if (!off_mode)
- continue;
+save_gpio_ctx:
+ if (bank->get_context_loss_count)
+ bank->ctx_loss_count = bank->get_context_loss_count(bank->dev);
+ omap_gpio_save_context(bank);
+#endif
+ return 0;
+}
- /* If going to OFF, remove triggering for all
- * non-wakeup GPIOs. Otherwise spurious IRQs will be
- * generated. See OMAP2420 Errata item 1.101. */
- if (!(bank->enabled_non_wakeup_gpios))
- continue;
+static int omap_gpio_pm_runtime_resume(struct device *dev)
+{
+#ifdef CONFIG_ARCH_OMAP2PLUS
+ struct platform_device *pdev = to_platform_device(dev);
+ struct gpio_bank *bank = platform_get_drvdata(pdev);
+ u32 ctx_lost_cnt_after;
+ u32 l = 0, gen, gen0, gen1;
+ int j;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP24XX_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
- }
+ for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
+ clk_enable(bank->dbck);
- if (cpu_is_omap44xx()) {
- bank->saved_datain = __raw_readl(bank->base +
- OMAP4_GPIO_DATAIN);
- l1 = __raw_readl(bank->base +
- OMAP4_GPIO_FALLINGDETECT);
- l2 = __raw_readl(bank->base +
- OMAP4_GPIO_RISINGDETECT);
- }
+ if (bank->get_context_loss_count) {
+ ctx_lost_cnt_after =
+ bank->get_context_loss_count(bank->dev);
+ if (ctx_lost_cnt_after != bank->ctx_loss_count)
+ omap_gpio_restore_context(bank);
+ }
- bank->saved_fallingdetect = l1;
- bank->saved_risingdetect = l2;
- l1 &= ~bank->enabled_non_wakeup_gpios;
- l2 &= ~bank->enabled_non_wakeup_gpios;
+ if (!(bank->enabled_non_wakeup_gpios))
+ return 0;
+
+ __raw_writel(bank->saved_fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ __raw_writel(bank->saved_risingdetect,
+ bank->base + bank->regs->risingdetect);
+ l = __raw_readl(bank->base + bank->regs->datain);
+ /* Check if any of the non-wakeup interrupt GPIOs have changed
+ * state. If so, generate an IRQ by software. This is
+ * horribly racy, but it's the best we can do to work around
+ * this silicon bug. */
+ l ^= bank->saved_datain;
+ l &= bank->enabled_non_wakeup_gpios;
+
+ /*
+ * No need to generate IRQs for the rising edge for gpio IRQs
+ * configured with falling edge only; and vice versa.
+ */
+ gen0 = l & bank->saved_fallingdetect;
+ gen0 &= bank->saved_datain;
+ gen1 = l & bank->saved_risingdetect;
+ gen1 &= ~(bank->saved_datain);
+
+ /* FIXME: Consider GPIO IRQs with level detections properly! */
+ gen = l & (~(bank->saved_fallingdetect) &
+ ~(bank->saved_risingdetect));
+ /* Consider all GPIO IRQs needed to be updated */
+ gen |= gen0 | gen1;
+
+ if (gen) {
+ u32 old0, old1;
+
+ old0 = __raw_readl(bank->base +
+ bank->regs->leveldetect0);
+ old1 = __raw_readl(bank->base +
+ bank->regs->leveldetect1);
+
+ __raw_writel(old0, bank->base +
+ bank->regs->leveldetect0);
+ __raw_writel(old1, bank->base +
+ bank->regs->leveldetect1);
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(l1, bank->base +
- OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base +
- OMAP24XX_GPIO_RISINGDETECT);
+ old0 |= gen;
+ old1 |= gen;
}
if (cpu_is_omap44xx()) {
- __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
+ old0 |= l;
+ old1 |= l;
}
-
- c++;
- }
- if (!c) {
- workaround_enabled = 0;
- return;
+ __raw_writel(old0, bank->base +
+ bank->regs->leveldetect0);
+ __raw_writel(old1, bank->base +
+ bank->regs->leveldetect1);
}
- workaround_enabled = 1;
+#endif
+ return 0;
}
-void omap2_gpio_resume_after_idle(void)
-{
- int i;
- int min = 0;
-
- if (cpu_is_omap34xx())
- min = 1;
- for (i = min; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- u32 l = 0, gen, gen0, gen1;
- int j;
+#ifdef CONFIG_ARCH_OMAP2PLUS
- for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
- clk_enable(bank->dbck);
+void omap2_gpio_prepare_for_idle(int off_mode)
+{
+ struct gpio_bank *bank;
- if (!workaround_enabled)
- continue;
+ if (!off_mode)
+ return;
- if (!(bank->enabled_non_wakeup_gpios))
+ list_for_each_entry(bank, &omap_gpio_list, node) {
+ if (!bank->mod_usage || !bank->loses_context)
continue;
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
- }
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev) < 0))
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_put_sync failed\n",
+ __func__, bank->id);
+ }
+}
- if (cpu_is_omap44xx()) {
- __raw_writel(bank->saved_fallingdetect,
- bank->base + OMAP4_GPIO_FALLINGDETECT);
- __raw_writel(bank->saved_risingdetect,
- bank->base + OMAP4_GPIO_RISINGDETECT);
- l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
- }
+void omap2_gpio_resume_after_idle(void)
+{
+ struct gpio_bank *bank;
- /* Check if any of the non-wakeup interrupt GPIOs have changed
- * state. If so, generate an IRQ by software. This is
- * horribly racy, but it's the best we can do to work around
- * this silicon bug. */
- l ^= bank->saved_datain;
- l &= bank->enabled_non_wakeup_gpios;
+ list_for_each_entry(bank, &omap_gpio_list, node) {
+ if (!bank->mod_usage || !bank->loses_context)
+ continue;
- /*
- * No need to generate IRQs for the rising edge for gpio IRQs
- * configured with falling edge only; and vice versa.
- */
- gen0 = l & bank->saved_fallingdetect;
- gen0 &= bank->saved_datain;
-
- gen1 = l & bank->saved_risingdetect;
- gen1 &= ~(bank->saved_datain);
-
- /* FIXME: Consider GPIO IRQs with level detections properly! */
- gen = l & (~(bank->saved_fallingdetect) &
- ~(bank->saved_risingdetect));
- /* Consider all GPIO IRQs needed to be updated */
- gen |= gen0 | gen1;
-
- if (gen) {
- u32 old0, old1;
-
- if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
- old0 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1 | gen, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP24XX_GPIO_LEVELDETECT1);
- }
-
- if (cpu_is_omap44xx()) {
- old0 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- old1 = __raw_readl(bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1 | l, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- __raw_writel(old0, bank->base +
- OMAP4_GPIO_LEVELDETECT0);
- __raw_writel(old1, bank->base +
- OMAP4_GPIO_LEVELDETECT1);
- }
- }
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev) < 0))
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_get_sync failed\n",
+ __func__, bank->id);
}
-
}
-
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-/* save the registers of bank 2-6 */
-void omap_gpio_save_context(void)
+void omap_gpio_save_context(struct gpio_bank *bank)
{
- int i;
-
- /* saving banks from 2-6 only since GPIO1 is in WKUP */
- for (i = 1; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- gpio_context[i].irqenable1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
- gpio_context[i].irqenable2 =
- __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
- gpio_context[i].wake_en =
- __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
- gpio_context[i].ctrl =
- __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
- gpio_context[i].oe =
- __raw_readl(bank->base + OMAP24XX_GPIO_OE);
- gpio_context[i].leveldetect0 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- gpio_context[i].leveldetect1 =
- __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- gpio_context[i].risingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
- gpio_context[i].fallingdetect =
- __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- gpio_context[i].dataout =
- __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
- }
+ bank->context.irqenable1 =
+ __raw_readl(bank->base + bank->regs->irqenable);
+ bank->context.irqenable2 =
+ __raw_readl(bank->base + bank->regs->irqenable2);
+ bank->context.wake_en =
+ __raw_readl(bank->base + bank->regs->wkup_status);
+ bank->context.ctrl = __raw_readl(bank->base + bank->regs->ctrl);
+ bank->context.oe = __raw_readl(bank->base + bank->regs->direction);
+ bank->context.leveldetect0 =
+ __raw_readl(bank->base + bank->regs->leveldetect0);
+ bank->context.leveldetect1 =
+ __raw_readl(bank->base + bank->regs->leveldetect1);
+ bank->context.risingdetect =
+ __raw_readl(bank->base + bank->regs->risingdetect);
+ bank->context.fallingdetect =
+ __raw_readl(bank->base + bank->regs->fallingdetect);
+ bank->context.dataout = __raw_readl(bank->base + bank->regs->dataout);
+ bank->saved_context = 1;
}
-/* restore the required registers of bank 2-6 */
-void omap_gpio_restore_context(void)
+void omap_gpio_restore_context(struct gpio_bank *bank)
{
- int i;
-
- for (i = 1; i < gpio_bank_count; i++) {
- struct gpio_bank *bank = &gpio_bank[i];
- __raw_writel(gpio_context[i].irqenable1,
- bank->base + OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(gpio_context[i].irqenable2,
- bank->base + OMAP24XX_GPIO_IRQENABLE2);
- __raw_writel(gpio_context[i].wake_en,
- bank->base + OMAP24XX_GPIO_WAKE_EN);
- __raw_writel(gpio_context[i].ctrl,
- bank->base + OMAP24XX_GPIO_CTRL);
- __raw_writel(gpio_context[i].oe,
- bank->base + OMAP24XX_GPIO_OE);
- __raw_writel(gpio_context[i].leveldetect0,
- bank->base + OMAP24XX_GPIO_LEVELDETECT0);
- __raw_writel(gpio_context[i].leveldetect1,
- bank->base + OMAP24XX_GPIO_LEVELDETECT1);
- __raw_writel(gpio_context[i].risingdetect,
- bank->base + OMAP24XX_GPIO_RISINGDETECT);
- __raw_writel(gpio_context[i].fallingdetect,
- bank->base + OMAP24XX_GPIO_FALLINGDETECT);
- __raw_writel(gpio_context[i].dataout,
- bank->base + OMAP24XX_GPIO_DATAOUT);
- }
+ if(!bank->saved_context)
+ return;
+ __raw_writel(bank->context.irqenable1,
+ bank->base + bank->regs->irqenable);
+ __raw_writel(bank->context.irqenable2,
+ bank->base + bank->regs->irqenable2);
+ __raw_writel(bank->context.wake_en,
+ bank->base + bank->regs->wkup_status);
+ __raw_writel(bank->context.ctrl, bank->base + bank->regs->ctrl);
+ __raw_writel(bank->context.oe, bank->base + bank->regs->direction);
+ __raw_writel(bank->context.leveldetect0,
+ bank->base + bank->regs->leveldetect0);
+ __raw_writel(bank->context.leveldetect1,
+ bank->base + bank->regs->leveldetect1);
+ __raw_writel(bank->context.risingdetect,
+ bank->base + bank->regs->risingdetect);
+ __raw_writel(bank->context.fallingdetect,
+ bank->base + bank->regs->fallingdetect);
+ __raw_writel(bank->context.dataout, bank->base + bank->regs->dataout);
}
#endif
+static const struct dev_pm_ops gpio_pm_ops = {
+ .runtime_suspend = omap_gpio_pm_runtime_suspend,
+ .runtime_resume = omap_gpio_pm_runtime_resume,
+ .suspend = omap_gpio_suspend,
+ .resume = omap_gpio_resume,
+};
+
static struct platform_driver omap_gpio_driver = {
.probe = omap_gpio_probe,
.driver = {
.name = "omap_gpio",
+ .pm = &gpio_pm_ops,
},
};
@@ -1994,16 +1479,3 @@ static int __init omap_gpio_drv_reg(void)
}
postcore_initcall(omap_gpio_drv_reg);
-static int __init omap_gpio_sysinit(void)
-{
- mpuio_init();
-
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
- if (cpu_is_omap16xx() || cpu_class_is_omap2())
- register_syscore_ops(&omap_gpio_syscore_ops);
-#endif
-
- return 0;
-}
-
-arch_initcall(omap_gpio_sysinit);
generated by cgit v1.1 at 2025-01-08 02:28:48 +0000