diff options
Diffstat (limited to 'drivers/gpu')
-rw-r--r-- | drivers/gpu/drm/nouveau/nouveau_bios.c | 165 |
1 files changed, 88 insertions, 77 deletions
diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index d8dcb36..b0b98d7 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -715,6 +715,83 @@ static int dcb_entry_idx_from_crtchead(struct drm_device *dev) return dcb_entry; } +static int +read_dcb_i2c_entry(struct drm_device *dev, int dcb_version, uint8_t *i2ctable, int index, struct dcb_i2c_entry *i2c) +{ + uint8_t dcb_i2c_ver = dcb_version, headerlen = 0, entry_len = 4; + int i2c_entries = DCB_MAX_NUM_I2C_ENTRIES; + int recordoffset = 0, rdofs = 1, wrofs = 0; + uint8_t port_type = 0; + + if (!i2ctable) + return -EINVAL; + + if (dcb_version >= 0x30) { + if (i2ctable[0] != dcb_version) /* necessary? */ + NV_WARN(dev, + "DCB I2C table version mismatch (%02X vs %02X)\n", + i2ctable[0], dcb_version); + dcb_i2c_ver = i2ctable[0]; + headerlen = i2ctable[1]; + if (i2ctable[2] <= DCB_MAX_NUM_I2C_ENTRIES) + i2c_entries = i2ctable[2]; + else + NV_WARN(dev, + "DCB I2C table has more entries than indexable " + "(%d entries, max %d)\n", i2ctable[2], + DCB_MAX_NUM_I2C_ENTRIES); + entry_len = i2ctable[3]; + /* [4] is i2c_default_indices, read in parse_dcb_table() */ + } + /* + * It's your own fault if you call this function on a DCB 1.1 BIOS -- + * the test below is for DCB 1.2 + */ + if (dcb_version < 0x14) { + recordoffset = 2; + rdofs = 0; + wrofs = 1; + } + + if (index == 0xf) + return 0; + if (index >= i2c_entries) { + NV_ERROR(dev, "DCB I2C index too big (%d >= %d)\n", + index, i2ctable[2]); + return -ENOENT; + } + if (i2ctable[headerlen + entry_len * index + 3] == 0xff) { + NV_ERROR(dev, "DCB I2C entry invalid\n"); + return -EINVAL; + } + + if (dcb_i2c_ver >= 0x30) { + port_type = i2ctable[headerlen + recordoffset + 3 + entry_len * index]; + + /* + * Fixup for chips using same address offset for read and + * write. + */ + if (port_type == 4) /* seen on C51 */ + rdofs = wrofs = 1; + if (port_type >= 5) /* G80+ */ + rdofs = wrofs = 0; + } + + if (dcb_i2c_ver >= 0x40) { + if (port_type != 5 && port_type != 6) + NV_WARN(dev, "DCB I2C table has port type %d\n", port_type); + + i2c->entry = ROM32(i2ctable[headerlen + recordoffset + entry_len * index]); + } + + i2c->port_type = port_type; + i2c->read = i2ctable[headerlen + recordoffset + rdofs + entry_len * index]; + i2c->write = i2ctable[headerlen + recordoffset + wrofs + entry_len * index]; + + return 0; +} + static struct nouveau_i2c_chan * init_i2c_device_find(struct drm_device *dev, int i2c_index) { @@ -734,6 +811,17 @@ init_i2c_device_find(struct drm_device *dev, int i2c_index) if (i2c_index == 0x80) /* g80+ */ i2c_index = dcb->i2c_default_indices & 0xf; + if (i2c_index > DCB_MAX_NUM_I2C_ENTRIES) { + NV_ERROR(dev, "invalid i2c_index 0x%x\n", i2c_index); + return NULL; + } + + /* Make sure i2c table entry has been parsed, it may not + * have been if this is a bus not referenced by a DCB encoder + */ + read_dcb_i2c_entry(dev, dcb->version, dcb->i2c_table, + i2c_index, &dcb->i2c[i2c_index]); + return nouveau_i2c_find(dev, i2c_index); } @@ -5090,83 +5178,6 @@ static uint16_t findstr(uint8_t *data, int n, const uint8_t *str, int len) return 0; } -static int -read_dcb_i2c_entry(struct drm_device *dev, int dcb_version, uint8_t *i2ctable, int index, struct dcb_i2c_entry *i2c) -{ - uint8_t dcb_i2c_ver = dcb_version, headerlen = 0, entry_len = 4; - int i2c_entries = DCB_MAX_NUM_I2C_ENTRIES; - int recordoffset = 0, rdofs = 1, wrofs = 0; - uint8_t port_type = 0; - - if (!i2ctable) - return -EINVAL; - - if (dcb_version >= 0x30) { - if (i2ctable[0] != dcb_version) /* necessary? */ - NV_WARN(dev, - "DCB I2C table version mismatch (%02X vs %02X)\n", - i2ctable[0], dcb_version); - dcb_i2c_ver = i2ctable[0]; - headerlen = i2ctable[1]; - if (i2ctable[2] <= DCB_MAX_NUM_I2C_ENTRIES) - i2c_entries = i2ctable[2]; - else - NV_WARN(dev, - "DCB I2C table has more entries than indexable " - "(%d entries, max %d)\n", i2ctable[2], - DCB_MAX_NUM_I2C_ENTRIES); - entry_len = i2ctable[3]; - /* [4] is i2c_default_indices, read in parse_dcb_table() */ - } - /* - * It's your own fault if you call this function on a DCB 1.1 BIOS -- - * the test below is for DCB 1.2 - */ - if (dcb_version < 0x14) { - recordoffset = 2; - rdofs = 0; - wrofs = 1; - } - - if (index == 0xf) - return 0; - if (index >= i2c_entries) { - NV_ERROR(dev, "DCB I2C index too big (%d >= %d)\n", - index, i2ctable[2]); - return -ENOENT; - } - if (i2ctable[headerlen + entry_len * index + 3] == 0xff) { - NV_ERROR(dev, "DCB I2C entry invalid\n"); - return -EINVAL; - } - - if (dcb_i2c_ver >= 0x30) { - port_type = i2ctable[headerlen + recordoffset + 3 + entry_len * index]; - - /* - * Fixup for chips using same address offset for read and - * write. - */ - if (port_type == 4) /* seen on C51 */ - rdofs = wrofs = 1; - if (port_type >= 5) /* G80+ */ - rdofs = wrofs = 0; - } - - if (dcb_i2c_ver >= 0x40) { - if (port_type != 5 && port_type != 6) - NV_WARN(dev, "DCB I2C table has port type %d\n", port_type); - - i2c->entry = ROM32(i2ctable[headerlen + recordoffset + entry_len * index]); - } - - i2c->port_type = port_type; - i2c->read = i2ctable[headerlen + recordoffset + rdofs + entry_len * index]; - i2c->write = i2ctable[headerlen + recordoffset + wrofs + entry_len * index]; - - return 0; -} - static struct dcb_gpio_entry * new_gpio_entry(struct nvbios *bios) { |