diff options
Diffstat (limited to 'drivers/net')
-rw-r--r-- | drivers/net/pcmcia/3c574_cs.c | 11 | ||||
-rw-r--r-- | drivers/net/pcmcia/3c589_cs.c | 11 | ||||
-rw-r--r-- | drivers/net/pcmcia/axnet_cs.c | 40 | ||||
-rw-r--r-- | drivers/net/pcmcia/com20020_cs.c | 19 | ||||
-rw-r--r-- | drivers/net/pcmcia/fmvj18x_cs.c | 31 | ||||
-rw-r--r-- | drivers/net/pcmcia/ibmtr_cs.c | 14 | ||||
-rw-r--r-- | drivers/net/pcmcia/nmclan_cs.c | 8 | ||||
-rw-r--r-- | drivers/net/pcmcia/pcnet_cs.c | 40 | ||||
-rw-r--r-- | drivers/net/pcmcia/smc91c92_cs.c | 43 | ||||
-rw-r--r-- | drivers/net/pcmcia/xirc2ps_cs.c | 34 | ||||
-rw-r--r-- | drivers/net/wireless/airo_cs.c | 22 | ||||
-rw-r--r-- | drivers/net/wireless/atmel_cs.c | 22 | ||||
-rw-r--r-- | drivers/net/wireless/b43/pcmcia.c | 4 | ||||
-rw-r--r-- | drivers/net/wireless/hostap/hostap_cs.c | 28 | ||||
-rw-r--r-- | drivers/net/wireless/libertas/if_cs.c | 8 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/orinoco_cs.c | 24 | ||||
-rw-r--r-- | drivers/net/wireless/orinoco/spectrum_cs.c | 24 | ||||
-rw-r--r-- | drivers/net/wireless/ray_cs.c | 5 | ||||
-rw-r--r-- | drivers/net/wireless/wl3501_cs.c | 12 |
19 files changed, 195 insertions, 205 deletions
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index b5ea9b8..c683f77 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -278,8 +278,8 @@ static int tc574_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->window_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -337,10 +337,11 @@ static int tc574_config(struct pcmcia_device *link) dev_dbg(&link->dev, "3c574_config()\n"); - link->io.IOAddrLines = 16; + link->io_lines = 16; + for (i = j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 122ef4a..61f9cf2 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -213,8 +213,8 @@ static int tc589_probe(struct pcmcia_device *link) lp->p_dev = link; spin_lock_init(&lp->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -277,12 +277,13 @@ static int tc589_config(struct pcmcia_device *link) "3Com card??\n"); multi = (link->card_id == PRODID_3COM_3C562); + link->io_lines = 16; + /* For the 3c562, the base address must be xx00-xx7f */ - link->io.IOAddrLines = 16; for (i = j = 0; j < 0x400; j += 0x10) { if (multi && (j & 0x80)) continue; - link->io.BasePort1 = j ^ 0x300; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + i = pcmcia_request_io(link); if (i == 0) break; } diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index c52fdf3..5f05ffb 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -259,28 +259,30 @@ static int get_prom(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* for master/slave multifunction cards */ - if (link->io.NumPorts2 > 0) - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->end > 0) + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -301,15 +303,15 @@ static int axnet_configcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return -ENODEV; diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3b53818..3c400cf 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -158,9 +158,8 @@ static int com20020_probe(struct pcmcia_device *p_dev) /* fill in our module parameters as defaults */ dev->dev_addr[0] = node; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.NumPorts1 = 16; - p_dev->io.IOAddrLines = 16; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; p_dev->conf.Attributes = CONF_ENABLE_IRQ; p_dev->conf.IntType = INT_MEMORY_AND_IO; @@ -245,20 +244,24 @@ static int com20020_config(struct pcmcia_device *link) dev_dbg(&link->dev, "com20020_config\n"); - dev_dbg(&link->dev, "baseport1 is %Xh\n", link->io.BasePort1); + dev_dbg(&link->dev, "baseport1 is %Xh\n", + (unsigned int) link->resource[0]->start); + i = -ENODEV; - if (!link->io.BasePort1) + link->io_lines = 16; + + if (!link->resource[0]->start) { for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + i = pcmcia_request_io(link); if (i == 0) break; } } else - i = pcmcia_request_io(link, &link->io); + i = pcmcia_request_io(link); if (i != 0) { diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index bba6369..6993044 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -248,9 +248,8 @@ static int fmvj18x_probe(struct pcmcia_device *link) lp->base = NULL; /* The io structure describes IO port mapping */ - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ link->conf.Attributes = CONF_ENABLE_IRQ; @@ -288,13 +287,13 @@ static int mfc_try_io_port(struct pcmcia_device *link) { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; for (i = 0; i < 5; i++) { - link->io.BasePort2 = serial_base[i]; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - if (link->io.BasePort2 == 0) { - link->io.NumPorts2 = 0; + link->resource[1]->start = serial_base[i]; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + if (link->resource[1]->start == 0) { + link->resource[1]->end = 0; printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n"); } - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret == 0) return ret; } @@ -310,8 +309,8 @@ static int ungermann_try_io_port(struct pcmcia_device *link) 0x380,0x3c0 only for ioport. */ for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) { - link->io.BasePort1 = ioaddr; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = ioaddr; + ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ link->conf.ConfigIndex = @@ -345,6 +344,8 @@ static int fmvj18x_config(struct pcmcia_device *link) dev_dbg(&link->dev, "fmvj18x_config\n"); + link->io_lines = 5; + len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); kfree(buf); @@ -363,20 +364,20 @@ static int fmvj18x_config(struct pcmcia_device *link) /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ link->conf.ConfigBase = 0x800; link->conf.ConfigIndex = 0x47; - link->io.NumPorts2 = 8; + link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; @@ -417,14 +418,14 @@ static int fmvj18x_config(struct pcmcia_device *link) } } - if (link->io.NumPorts2 != 0) { + if (link->resource[1]->end != 0) { ret = mfc_try_io_port(link); if (ret != 0) goto failed; } else if (cardtype == UNGERMANN) { ret = ungermann_try_io_port(link); if (ret != 0) goto failed; } else { - ret = pcmcia_request_io(link, &link->io); + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index e99abaa..3fd8595 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -151,9 +151,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->priv = info; info->ti = netdev_priv(dev); - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts1 = 4; - link->io.IOAddrLines = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[0]->end = 4; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.Present = PRESENT_OPTION; @@ -218,16 +217,17 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_config\n"); link->conf.ConfigIndex = 0x61; + link->io_lines = 16; /* Determine if this is PRIMARY or ALTERNATE. */ /* Try PRIMARY card at 0xA20-0xA23 */ - link->io.BasePort1 = 0xA20; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA20; + i = pcmcia_request_io(link); if (i != 0) { /* Couldn't get 0xA20-0xA23. Try ALTERNATE at 0xA24-0xA27. */ - link->io.BasePort1 = 0xA24; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = 0xA24; + ret = pcmcia_request_io(link); if (ret) goto failed; } diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 9980cbb..68f2dee 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -458,9 +458,8 @@ static int nmclan_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&lp->bank_lock); - link->io.NumPorts1 = 32; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 5; + link->resource[0]->end = 32; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 1; @@ -644,7 +643,8 @@ static int nmclan_config(struct pcmcia_device *link) dev_dbg(&link->dev, "nmclan_config\n"); - ret = pcmcia_request_io(link, &link->io); + link->io_lines = 5; + ret = pcmcia_request_io(link); if (ret) goto failed; ret = pcmcia_request_exclusive_irq(link, mace_interrupt); diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index c9cd237..9c5fc9d 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -477,29 +477,31 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) static int try_io_port(struct pcmcia_device *link) { int j, ret; - if (link->io.NumPorts1 == 32) { - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (link->io.NumPorts2 > 0) { + link->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + link->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + if (link->resource[0]->end == 32) { + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + if (link->resource[1]->end > 0) { /* for master/slave multifunction cards */ - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; } } else { /* This should be two 16-port windows */ - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; } - if (link->io.BasePort1 == 0) { - link->io.IOAddrLines = 16; + if (link->resource[0]->start == 0) { for (j = 0; j < 0x400; j += 0x20) { - link->io.BasePort1 = j ^ 0x300; - link->io.BasePort2 = (j ^ 0x300) + 0x10; - ret = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j ^ 0x300; + link->resource[1]->start = (j ^ 0x300) + 0x10; + link->io_lines = 16; + ret = pcmcia_request_io(link); if (ret == 0) return ret; } return ret; } else { - return pcmcia_request_io(link, &link->io); + return pcmcia_request_io(link); } } @@ -520,18 +522,18 @@ static int pcnet_confcheck(struct pcmcia_device *p_dev, network function with window 0, and serial with window 1 */ if (io->nwin > 1) { i = (io->win[1].len > io->win[0].len); - p_dev->io.BasePort2 = io->win[1-i].base; - p_dev->io.NumPorts2 = io->win[1-i].len; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; } else { - i = p_dev->io.NumPorts2 = 0; + i = p_dev->resource[1]->end = 0; } *has_shmem = ((cfg->mem.nwin == 1) && (cfg->mem.win[0].len >= 0x4000)); - p_dev->io.BasePort1 = io->win[i].base; - p_dev->io.NumPorts1 = io->win[i].len; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->io.NumPorts1 + p_dev->io.NumPorts2 >= 32) + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) return try_io_port(p_dev); return 0; diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 1b0b3230..a5e4779 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -324,9 +324,8 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->io.NumPorts1 = 16; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.IOAddrLines = 4; + link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; @@ -427,12 +426,13 @@ static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->io.BasePort2 = cf->io.win[0].base; + p_dev->resource[1]->start = cf->io.win[0].base; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; - p_dev->io.BasePort1 = k ^ 0x300; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[0]->start = k ^ 0x300; + p_dev->io_lines = 16; + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -448,9 +448,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.IOAddrLines = 16; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -601,9 +600,9 @@ static int smc_configcheck(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.BasePort1 = cf->io.win[0].base; - p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev, &p_dev->io); + p_dev->resource[0]->start = cf->io.win[0].base; + p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + return pcmcia_request_io(p_dev); } static int smc_config(struct pcmcia_device *link) @@ -611,7 +610,7 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->io.NumPorts1 = 16; + link->resource[0]->end = 16; i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -646,25 +645,25 @@ static int osi_config(struct pcmcia_device *link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; - link->io.NumPorts1 = 64; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; - link->io.NumPorts2 = 8; - link->io.IOAddrLines = 16; + link->resource[0]->end = 64; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ link->conf.ConfigIndex = 0x23; + link->io_lines = 16; for (i = j = 0; j < 4; j++) { - link->io.BasePort2 = com[j]; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->start = com[j]; + i = pcmcia_request_io(link); if (i == 0) break; } if (i != 0) { /* Fallback: turn off hard decode */ link->conf.ConfigIndex = 0x03; - link->io.NumPorts2 = 0; - i = pcmcia_request_io(link, &link->io); + link->resource[1]->end = 0; + i = pcmcia_request_io(link); } dev->base_addr = link->resource[0]->start + 0x10; return i; @@ -803,7 +802,7 @@ static int check_sig(struct pcmcia_device *link) } /* Try setting bus width */ - width = (link->io.Attributes1 == IO_DATA_PATH_WIDTH_AUTO); + width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); s = inb(ioaddr + CONFIG); if (width) s |= CFG_16BIT; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 034920b..8fb0eb1 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -677,9 +677,9 @@ xirc2ps_config_modem(struct pcmcia_device *p_dev, if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = ioaddr; - if (!pcmcia_request_io(p_dev, &p_dev->io)) + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) return 0; } } @@ -696,11 +696,11 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, int *pass = priv_data; if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->io.BasePort2 = cf->io.win[0].base; - p_dev->io.BasePort1 = p_dev->io.BasePort2 + p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->resource[0]->start = p_dev->resource[1]->start + (*pass ? (cf->index & 0x20 ? -24:8) : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev, &p_dev->io)) + if (!pcmcia_request_io(p_dev)) return 0; } return -ENODEV; @@ -807,8 +807,7 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->io.IOAddrLines =10; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; if (local->modem) { int pass; @@ -816,16 +815,16 @@ xirc2ps_config(struct pcmcia_device * link) link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status |= CCSR_AUDIO_ENA; } - link->io.NumPorts2 = 8; - link->io.Attributes2 = IO_DATA_PATH_WIDTH_8; + link->resource[1]->end = 8; + link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->io.NumPorts1 = 16; /* no Mako stuff anymore */ + link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->io.NumPorts1 = 18; + link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for @@ -840,14 +839,15 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { - link->io.NumPorts1 = 16; + link->io_lines = 10; + link->resource[0]->end = 16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - link->io.BasePort1 = ioaddr; - if (!(err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = ioaddr; + if (!(err = pcmcia_request_io(link))) goto port_found; } - link->io.BasePort1 = 0; /* let CS decide */ - if ((err=pcmcia_request_io(link, &link->io))) + link->resource[0]->start = 0; /* let CS decide */ + if ((err = pcmcia_request_io(link))) goto config_error; } port_found: diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index b7e7f50..d241b4a 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -175,25 +175,23 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) return -ENODEV; /* diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 65b3aed..3b63216 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -190,25 +190,23 @@ static int atmel_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int atmel_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index f71bc78..7c9af82 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -77,10 +77,6 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) dev->conf.Attributes = CONF_ENABLE_IRQ; dev->conf.IntType = INT_MEMORY_AND_IO; - dev->io.BasePort2 = 0; - dev->io.NumPorts2 = 0; - dev->io.Attributes2 = 0; - win.Attributes = WIN_ADDR_SPACE_MEM | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index 4e13ced..ba54d1b 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -519,30 +519,24 @@ static int prism2_config_check(struct pcmcia_device *p_dev, PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " "dflt->io.nwin=%d\n", cfg->io.nwin, dflt->io.nwin); - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, " - "io.base=0x%04x, len=%d\n", io->flags, - io->win[0].base, io->win[0].len); - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & - CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int prism2_config(struct pcmcia_device *link) diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index be4c475..9c29839 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -801,9 +801,9 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, unsigned int vcc, void *priv_data) { - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = cfg->io.win[0].base; - p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = cfg->io.win[0].len; /* Do we need to allocate an interrupt? */ p_dev->conf.Attributes |= CONF_ENABLE_IRQ; @@ -815,7 +815,7 @@ static int if_cs_ioprobe(struct pcmcia_device *p_dev, } /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev, &p_dev->io); + return pcmcia_request_io(p_dev); } static int if_cs_probe(struct pcmcia_device *p_dev) diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 6d514b5..ef46a2d 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -191,25 +191,23 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 4f8f55e..873877e 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -253,25 +253,23 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev, p_dev->conf.Attributes |= CONF_ENABLE_IRQ; /* IO window settings */ - p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0; + p_dev->resource[0]->end = p_dev->resource[1]->end = 0; if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + p_dev->resource[0]->start = io->win[0].base; + p_dev->resource[0]->end = io->win[0].len; if (io->nwin > 1) { - p_dev->io.Attributes2 = p_dev->io.Attributes1; - p_dev->io.BasePort2 = io->win[1].base; - p_dev->io.NumPorts2 = io->win[1].len; + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1].base; + p_dev->resource[1]->end = io->win[1].len; } /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev, &p_dev->io) != 0) + if (pcmcia_request_io(p_dev) != 0) goto next_entry; } return 0; diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 165beb6..b83d5ef 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -315,9 +315,8 @@ static int ray_probe(struct pcmcia_device *p_dev) local->finder = p_dev; /* The io structure describes IO port mapping. None used here */ - p_dev->io.NumPorts1 = 0; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 0; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a32f220..a1cc2d4 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -1884,9 +1884,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) struct wl3501_card *this; /* The io structure describes IO port mapping */ - p_dev->io.NumPorts1 = 16; - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - p_dev->io.IOAddrLines = 5; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ p_dev->conf.Attributes = CONF_ENABLE_IRQ; @@ -1932,13 +1931,14 @@ static int wl3501_config(struct pcmcia_device *link) /* Try allocating IO ports. This tries a few fixed addresses. If you * want, you can also read the card's config table to pick addresses -- * see the serial driver for an example. */ + link->io_lines = 5; for (j = 0x280; j < 0x400; j += 0x20) { /* The '^0x300' is so that we probe 0x300-0x3ff first, then * 0x200-0x2ff, and so on, because this seems safer */ - link->io.BasePort1 = j; - link->io.BasePort2 = link->io.BasePort1 + 0x10; - i = pcmcia_request_io(link, &link->io); + link->resource[0]->start = j; + link->resource[1]->start = link->resource[0]->start + 0x10; + i = pcmcia_request_io(link); if (i == 0) break; } |