diff options
Diffstat (limited to 'drivers')
112 files changed, 676 insertions, 412 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 988f8bb..234197e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -334,6 +334,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 29234c8..5c47a9e 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -677,6 +677,8 @@ static const struct pci_device_id amd[] = { { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 8 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 8 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 8 }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 8 }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 9 }, { }, diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index f4455a1..1c7f19a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -230,7 +230,7 @@ static int vt6420_prereset(struct ata_port *ap) int online; /* don't do any SCR stuff if we're not loading */ - if (!ATA_PFLAG_LOADING) + if (!(ap->pflags & ATA_PFLAG_LOADING)) goto skip_scr; /* Resume phy. This is the old resume sequence from diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 39a9f8c..2af12fc 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -409,14 +409,6 @@ config SGI_MBCS If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. -config MSPEC - tristate "Memory special operations driver" - depends on IA64 - help - If you have an ia64 and you want to enable memory special - operations support (formerly known as fetchop), say Y here, - otherwise say N. - source "drivers/serial/Kconfig" config UNIX98_PTYS diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 34a4fd1..a41b8df 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -376,13 +376,23 @@ static void free_recv_msg_list(struct list_head *q) } } +static void free_smi_msg_list(struct list_head *q) +{ + struct ipmi_smi_msg *msg, *msg2; + + list_for_each_entry_safe(msg, msg2, q, link) { + list_del(&msg->link); + ipmi_free_smi_msg(msg); + } +} + static void clean_up_interface_data(ipmi_smi_t intf) { int i; struct cmd_rcvr *rcvr, *rcvr2; struct list_head list; - free_recv_msg_list(&intf->waiting_msgs); + free_smi_msg_list(&intf->waiting_msgs); free_recv_msg_list(&intf->waiting_events); /* Wholesale remove all the entries from the list in the @@ -1844,7 +1854,7 @@ static ssize_t provides_dev_sdrs_show(struct device *dev, struct bmc_device *bmc = dev_get_drvdata(dev); return snprintf(buf, 10, "%u\n", - bmc->id.device_revision && 0x80 >> 7); + (bmc->id.device_revision & 0x80) >> 7); } static ssize_t revision_show(struct device *dev, struct device_attribute *attr, @@ -1853,7 +1863,7 @@ static ssize_t revision_show(struct device *dev, struct device_attribute *attr, struct bmc_device *bmc = dev_get_drvdata(dev); return snprintf(buf, 20, "%u\n", - bmc->id.device_revision && 0x0F); + bmc->id.device_revision & 0x0F); } static ssize_t firmware_rev_show(struct device *dev, @@ -3232,7 +3242,9 @@ void ipmi_smi_msg_received(ipmi_smi_t intf, report the error immediately. */ if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) - && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)) + && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) + && (msg->rsp[2] != IPMI_BUS_ERR) + && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) { int chan = msg->rsp[3] & 0xf; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index e5cfb1f..abc5149 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1211,7 +1211,7 @@ static void intf_mem_outb(struct si_sm_io *io, unsigned int offset, static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset) { return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, @@ -1223,7 +1223,7 @@ static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset) { return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, @@ -1236,7 +1236,7 @@ static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset) { return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void mem_outq(struct si_sm_io *io, unsigned int offset, @@ -1867,7 +1867,7 @@ static int ipmi_pci_resume(struct pci_dev *pdev) static struct pci_device_id ipmi_pci_devices[] = { { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, - { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) } + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) } }; MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 5c0dec3..235e892 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -72,7 +72,11 @@ enum { MSPEC_UNCACHED }; +#ifdef CONFIG_SGI_SN static int is_sn2; +#else +#define is_sn2 0 +#endif /* * One of these structures is allocated when an mspec region is mmaped. The @@ -211,7 +215,7 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address) if (vdata->type == MSPEC_FETCHOP) paddr = TO_AMO(maddr); else - paddr = __pa(TO_CAC(maddr)); + paddr = maddr & ~__IA64_UNCACHED_OFFSET; pfn = paddr >> PAGE_SHIFT; @@ -335,6 +339,7 @@ mspec_init(void) * The fetchop device only works on SN2 hardware, uncached and cached * memory drivers should both be valid on all ia64 hardware */ +#ifdef CONFIG_SGI_SN if (ia64_platform_is("sn2")) { is_sn2 = 1; if (is_shub2()) { @@ -363,6 +368,7 @@ mspec_init(void) goto free_scratch_pages; } } +#endif ret = misc_register(&cached_miscdev); if (ret) { printk(KERN_ERR "%s: failed to register device %i\n", diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 4bde30b..75e9e38 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -230,34 +230,43 @@ static struct kobj_type ktype_memctrl = { */ static int edac_sysfs_memctrl_setup(void) { - int err=0; + int err = 0; debugf1("%s()\n", __func__); /* create the /sys/devices/system/edac directory */ err = sysdev_class_register(&edac_class); - if (!err) { - /* Init the MC's kobject */ - memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj)); - edac_memctrl_kobj.parent = &edac_class.kset.kobj; - edac_memctrl_kobj.ktype = &ktype_memctrl; + if (err) { + debugf1("%s() error=%d\n", __func__, err); + return err; + } - /* generate sysfs "..../edac/mc" */ - err = kobject_set_name(&edac_memctrl_kobj,"mc"); + /* Init the MC's kobject */ + memset(&edac_memctrl_kobj, 0, sizeof (edac_memctrl_kobj)); + edac_memctrl_kobj.parent = &edac_class.kset.kobj; + edac_memctrl_kobj.ktype = &ktype_memctrl; - if (!err) { - /* FIXME: maybe new sysdev_create_subdir() */ - err = kobject_register(&edac_memctrl_kobj); + /* generate sysfs "..../edac/mc" */ + err = kobject_set_name(&edac_memctrl_kobj,"mc"); - if (err) - debugf1("Failed to register '.../edac/mc'\n"); - else - debugf1("Registered '.../edac/mc' kobject\n"); - } - } else - debugf1("%s() error=%d\n", __func__, err); + if (err) + goto fail; + + /* FIXME: maybe new sysdev_create_subdir() */ + err = kobject_register(&edac_memctrl_kobj); + + if (err) { + debugf1("Failed to register '.../edac/mc'\n"); + goto fail; + } + debugf1("Registered '.../edac/mc' kobject\n"); + + return 0; + +fail: + sysdev_class_unregister(&edac_class); return err; } diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index bddfebd..8821494 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -724,7 +724,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) * if we have an error, pass back CHECK_CONDITION as the * scsi status byte */ - if (!rq->errors) + if (blk_pc_request(rq) && !rq->errors) rq->errors = SAM_STAT_CHECK_CONDITION; /* Check for tray open. */ diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c index 2b0ea8b..753fe0e 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/pci/amd74xx.c @@ -75,6 +75,7 @@ static struct amd_ide_chip { { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, 0x50, AMD_UDMA_133 }, + { PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, 0x50, AMD_UDMA_133 }, { PCI_DEVICE_ID_AMD_CS5536_IDE, 0x40, AMD_UDMA_100 }, { 0 } }; @@ -491,7 +492,8 @@ static ide_pci_device_t amd74xx_chipsets[] __devinitdata = { /* 16 */ DECLARE_NV_DEV("NFORCE-MCP55"), /* 17 */ DECLARE_NV_DEV("NFORCE-MCP61"), /* 18 */ DECLARE_NV_DEV("NFORCE-MCP65"), - /* 19 */ DECLARE_AMD_DEV("AMD5536"), + /* 19 */ DECLARE_NV_DEV("NFORCE-MCP67"), + /* 20 */ DECLARE_AMD_DEV("AMD5536"), }; static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id) @@ -530,7 +532,8 @@ static struct pci_device_id amd74xx_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18 }, - { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 }, + { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 19 }, + { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 20 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl); diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c index b4ffaa7..09a13c1 100644 --- a/drivers/infiniband/hw/ipath/ipath_driver.c +++ b/drivers/infiniband/hw/ipath/ipath_driver.c @@ -304,7 +304,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, } addr = pci_resource_start(pdev, 0); len = pci_resource_len(pdev, 0); - ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x " + ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x " "driver_data %lx\n", addr, len, pdev->irq, ent->vendor, ent->device, ent->driver_data); @@ -467,15 +467,15 @@ static int __devinit ipath_init_one(struct pci_dev *pdev, * check 0 irq after we return from chip-specific bus setup, since * that can affect this due to setup */ - if (!pdev->irq) + if (!dd->ipath_irq) ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't " "work\n"); else { - ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED, + ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED, IPATH_DRV_NAME, dd); if (ret) { ipath_dev_err(dd, "Couldn't setup irq handler, " - "irq=%u: %d\n", pdev->irq, ret); + "irq=%d: %d\n", dd->ipath_irq, ret); goto bail_iounmap; } } @@ -637,11 +637,10 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev) * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs * for all versions of the driver, if they were allocated */ - if (pdev->irq) { - ipath_cdbg(VERBOSE, - "unit %u free_irq of irq %x\n", - dd->ipath_unit, pdev->irq); - free_irq(pdev->irq, dd); + if (dd->ipath_irq) { + ipath_cdbg(VERBOSE, "unit %u free irq %d\n", + dd->ipath_unit, dd->ipath_irq); + dd->ipath_f_free_irq(dd); } else ipath_dbg("irq is 0, not doing free_irq " "for unit %u\n", dd->ipath_unit); diff --git a/drivers/infiniband/hw/ipath/ipath_iba6110.c b/drivers/infiniband/hw/ipath/ipath_iba6110.c index 9e4e8d4..e57c7a3 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6110.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6110.c @@ -38,6 +38,7 @@ #include <linux/pci.h> #include <linux/delay.h> +#include <linux/htirq.h> #include "ipath_kernel.h" #include "ipath_registers.h" @@ -913,49 +914,40 @@ static void slave_or_pri_blk(struct ipath_devdata *dd, struct pci_dev *pdev, } } -static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev, - int pos) +static int ipath_ht_intconfig(struct ipath_devdata *dd) { - u32 int_handler_addr_lower; - u32 int_handler_addr_upper; - u64 ihandler; - u32 intvec; + int ret; - /* use indirection register to get the intr handler */ - pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x10); - pci_read_config_dword(pdev, pos + 4, &int_handler_addr_lower); - pci_write_config_byte(pdev, pos + HT_INTR_REG_INDEX, 0x11); - pci_read_config_dword(pdev, pos + 4, &int_handler_addr_upper); + if (dd->ipath_intconfig) { + ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig, + dd->ipath_intconfig); /* interrupt address */ + ret = 0; + } else { + ipath_dev_err(dd, "No interrupts enabled, couldn't setup " + "interrupt address\n"); + ret = -EINVAL; + } - ihandler = (u64) int_handler_addr_lower | - ((u64) int_handler_addr_upper << 32); + return ret; +} + +static void ipath_ht_irq_update(struct pci_dev *dev, int irq, + struct ht_irq_msg *msg) +{ + struct ipath_devdata *dd = pci_get_drvdata(dev); + u64 prev_intconfig = dd->ipath_intconfig; + + dd->ipath_intconfig = msg->address_lo; + dd->ipath_intconfig |= ((u64) msg->address_hi) << 32; /* - * kernels with CONFIG_PCI_MSI set the vector in the irq field of - * struct pci_device, so we use that to program the internal - * interrupt register (not config space) with that value. The BIOS - * must still have done the basic MSI setup. - */ - intvec = pdev->irq; - /* - * clear any vector bits there; normally not set but we'll overload - * this for some debug purposes (setting the HTC debug register - * value from software, rather than GPIOs), so it might be set on a - * driver reload. + * If the previous value of dd->ipath_intconfig is zero, we're + * getting configured for the first time, and must not program the + * intconfig register here (it will be programmed later, when the + * hardware is ready). Otherwise, we should. */ - ihandler &= ~0xff0000; - /* x86 vector goes in intrinfo[23:16] */ - ihandler |= intvec << 16; - ipath_cdbg(VERBOSE, "ihandler lower %x, upper %x, intvec %x, " - "interruptconfig %llx\n", int_handler_addr_lower, - int_handler_addr_upper, intvec, - (unsigned long long) ihandler); - - /* can't program yet, so save for interrupt setup */ - dd->ipath_intconfig = ihandler; - /* keep going, so we find link control stuff also */ - - return ihandler != 0; + if (prev_intconfig) + ipath_ht_intconfig(dd); } /** @@ -971,12 +963,19 @@ static int set_int_handler(struct ipath_devdata *dd, struct pci_dev *pdev, static int ipath_setup_ht_config(struct ipath_devdata *dd, struct pci_dev *pdev) { - int pos, ret = 0; - int ihandler = 0; + int pos, ret; + + ret = __ht_create_irq(pdev, 0, ipath_ht_irq_update); + if (ret < 0) { + ipath_dev_err(dd, "Couldn't create interrupt handler: " + "err %d\n", ret); + goto bail; + } + dd->ipath_irq = ret; + ret = 0; /* - * Read the capability info to find the interrupt info, and also - * handle clearing CRC errors in linkctrl register if necessary. We + * Handle clearing CRC errors in linkctrl register if necessary. We * do this early, before we ever enable errors or hardware errors, * mostly to avoid causing the chip to enter freeze mode. */ @@ -1000,17 +999,9 @@ static int ipath_setup_ht_config(struct ipath_devdata *dd, } if (!(cap_type & 0xE0)) slave_or_pri_blk(dd, pdev, pos, cap_type); - else if (cap_type == HT_INTR_DISC_CONFIG) - ihandler = set_int_handler(dd, pdev, pos); } while ((pos = pci_find_next_capability(pdev, pos, PCI_CAP_ID_HT))); - if (!ihandler) { - ipath_dev_err(dd, "Couldn't find interrupt handler in " - "config space\n"); - ret = -ENODEV; - } - bail: return ret; } @@ -1360,25 +1351,6 @@ static void ipath_ht_quiet_serdes(struct ipath_devdata *dd) ipath_write_kreg(dd, dd->ipath_kregs->kr_serdesconfig0, val); } -static int ipath_ht_intconfig(struct ipath_devdata *dd) -{ - int ret; - - if (!dd->ipath_intconfig) { - ipath_dev_err(dd, "No interrupts enabled, couldn't setup " - "interrupt address\n"); - ret = 1; - goto bail; - } - - ipath_write_kreg(dd, dd->ipath_kregs->kr_interruptconfig, - dd->ipath_intconfig); /* interrupt address */ - ret = 0; - -bail: - return ret; -} - /** * ipath_pe_put_tid - write a TID in chip * @dd: the infinipath device @@ -1575,6 +1547,14 @@ static int ipath_ht_get_base_info(struct ipath_portdata *pd, void *kbase) return 0; } +static void ipath_ht_free_irq(struct ipath_devdata *dd) +{ + free_irq(dd->ipath_irq, dd); + ht_destroy_irq(dd->ipath_irq); + dd->ipath_irq = 0; + dd->ipath_intconfig = 0; +} + /** * ipath_init_iba6110_funcs - set up the chip-specific function pointers * @dd: the infinipath device @@ -1598,6 +1578,7 @@ void ipath_init_iba6110_funcs(struct ipath_devdata *dd) dd->ipath_f_cleanup = ipath_setup_ht_cleanup; dd->ipath_f_setextled = ipath_setup_ht_setextled; dd->ipath_f_get_base_info = ipath_ht_get_base_info; + dd->ipath_f_free_irq = ipath_ht_free_irq; /* * initialize chip-specific variables diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c index a72ab9d..6af8968 100644 --- a/drivers/infiniband/hw/ipath/ipath_iba6120.c +++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c @@ -851,6 +851,7 @@ static int ipath_setup_pe_config(struct ipath_devdata *dd, int pos, ret; dd->ipath_msi_lo = 0; /* used as a flag during reset processing */ + dd->ipath_irq = pdev->irq; ret = pci_enable_msi(dd->pcidev); if (ret) ipath_dev_err(dd, "pci_enable_msi failed: %d, " @@ -1323,6 +1324,12 @@ done: return 0; } +static void ipath_pe_free_irq(struct ipath_devdata *dd) +{ + free_irq(dd->ipath_irq, dd); + dd->ipath_irq = 0; +} + /** * ipath_init_iba6120_funcs - set up the chip-specific function pointers * @dd: the infinipath device @@ -1349,6 +1356,7 @@ void ipath_init_iba6120_funcs(struct ipath_devdata *dd) dd->ipath_f_cleanup = ipath_setup_pe_cleanup; dd->ipath_f_setextled = ipath_setup_pe_setextled; dd->ipath_f_get_base_info = ipath_pe_get_base_info; + dd->ipath_f_free_irq = ipath_pe_free_irq; /* initialize chip-specific variables */ dd->ipath_f_tidtemplate = ipath_pe_tidtemplate; diff --git a/drivers/infiniband/hw/ipath/ipath_intr.c b/drivers/infiniband/hw/ipath/ipath_intr.c index d9079ee..5652a55 100644 --- a/drivers/infiniband/hw/ipath/ipath_intr.c +++ b/drivers/infiniband/hw/ipath/ipath_intr.c @@ -710,14 +710,14 @@ static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp) * linuxbios development work, and it may happen in * the future again. */ - if (dd->pcidev && dd->pcidev->irq) { + if (dd->pcidev && dd->ipath_irq) { ipath_dev_err(dd, "Now %u unexpected " "interrupts, unregistering " "interrupt handler\n", *unexpectp); - ipath_dbg("free_irq of irq %x\n", - dd->pcidev->irq); - free_irq(dd->pcidev->irq, dd); + ipath_dbg("free_irq of irq %d\n", + dd->ipath_irq); + dd->ipath_f_free_irq(dd); } } if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) { @@ -753,7 +753,7 @@ static void ipath_bad_regread(struct ipath_devdata *dd) if (allbits == 2) { ipath_dev_err(dd, "Still bad interrupt status, " "unregistering interrupt\n"); - free_irq(dd->pcidev->irq, dd); + dd->ipath_f_free_irq(dd); } else if (allbits > 2) { if ((allbits % 10000) == 0) printk("."); diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 06d5020..986b212 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -213,6 +213,8 @@ struct ipath_devdata { void (*ipath_f_setextled)(struct ipath_devdata *, u64, u64); /* fill out chip-specific fields */ int (*ipath_f_get_base_info)(struct ipath_portdata *, void *); + /* free irq */ + void (*ipath_f_free_irq)(struct ipath_devdata *); struct ipath_ibdev *verbs_dev; struct timer_list verbs_timer; /* total dwords sent (summed from counter) */ @@ -328,6 +330,8 @@ struct ipath_devdata { /* so we can rewrite it after a chip reset */ u32 ipath_pcibar1; + /* interrupt number */ + int ipath_irq; /* HT/PCI Vendor ID (here for NodeInfo) */ u16 ipath_vendorid; /* HT/PCI Device ID (here for NodeInfo) */ diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c index d8d256d..5800bee 100644 --- a/drivers/isdn/gigaset/common.c +++ b/drivers/isdn/gigaset/common.c @@ -616,7 +616,7 @@ static struct bc_state *gigaset_initbcs(struct bc_state *bcs, } else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL) skb_reserve(bcs->skb, HW_HDR_LEN); else { - gig_dbg(DEBUG_INIT, "could not allocate skb\n"); + warn("could not allocate skb\n"); bcs->inputstate |= INS_skip_frame; } diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c index 1fadf01..1875877 100644 --- a/drivers/isdn/hysdn/hysdn_sched.c +++ b/drivers/isdn/hysdn/hysdn_sched.c @@ -155,21 +155,17 @@ hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan) if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg chan=%d len=%d", chan, strlen(line) + 1); - spin_lock_irqsave(&card->hysdn_lock, flags); while (card->async_busy) { - sti(); if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg delayed"); msleep_interruptible(20); /* Timeout 20ms */ - if (!--cnt) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); + if (!--cnt) return (-ERR_ASYNC_TIME); /* timed out */ - } - cli(); } /* wait for buffer to become free */ + spin_lock_irqsave(&card->hysdn_lock, flags); strcpy(card->async_data, line); card->async_len = strlen(line) + 1; card->async_channel = chan; @@ -177,30 +173,23 @@ hysdn_tx_cfgline(hysdn_card *card, unsigned char *line, unsigned short chan) /* now queue the task */ schedule_work(&card->irq_queue); - sti(); + spin_unlock_irqrestore(&card->hysdn_lock, flags); if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg data queued"); cnt++; /* short delay */ - cli(); while (card->async_busy) { - sti(); if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg waiting for tx-ready"); msleep_interruptible(20); /* Timeout 20ms */ - if (!--cnt) { - spin_unlock_irqrestore(&card->hysdn_lock, flags); + if (!--cnt) return (-ERR_ASYNC_TIME); /* timed out */ - } - cli(); } /* wait for buffer to become free again */ - spin_unlock_irqrestore(&card->hysdn_lock, flags); - if (card->debug_flags & LOG_SCHED_ASYN) hysdn_addlog(card, "async tx-cfg data send"); diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index d13bb15..4510ad8 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -606,9 +606,14 @@ static struct hash_cell *__find_device_hash_cell(struct dm_ioctl *param) return __get_name_cell(param->name); md = dm_get_md(huge_decode_dev(param->dev)); - if (md) - mdptr = dm_get_mdptr(md); + if (!md) + goto out; + mdptr = dm_get_mdptr(md); + if (!mdptr) + dm_put(md); + +out: return mdptr; } diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 659224c..48a653b 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -24,6 +24,7 @@ static struct workqueue_struct *_kmirrord_wq; static struct work_struct _kmirrord_work; +static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped); static inline void wake(void) { @@ -83,6 +84,7 @@ struct region_hash { struct list_head *buckets; spinlock_t region_lock; + atomic_t recovery_in_flight; struct semaphore recovery_count; struct list_head clean_regions; struct list_head quiesced_regions; @@ -191,6 +193,7 @@ static int rh_init(struct region_hash *rh, struct mirror_set *ms, spin_lock_init(&rh->region_lock); sema_init(&rh->recovery_count, 0); + atomic_set(&rh->recovery_in_flight, 0); INIT_LIST_HEAD(&rh->clean_regions); INIT_LIST_HEAD(&rh->quiesced_regions); INIT_LIST_HEAD(&rh->recovered_regions); @@ -382,6 +385,8 @@ static void rh_update_states(struct region_hash *rh) rh->log->type->clear_region(rh->log, reg->key); rh->log->type->complete_resync_work(rh->log, reg->key, 1); dispatch_bios(rh->ms, ®->delayed_bios); + if (atomic_dec_and_test(&rh->recovery_in_flight)) + wake_up_all(&_kmirrord_recovery_stopped); up(&rh->recovery_count); mempool_free(reg, rh->region_pool); } @@ -502,11 +507,21 @@ static int __rh_recovery_prepare(struct region_hash *rh) static void rh_recovery_prepare(struct region_hash *rh) { - while (!down_trylock(&rh->recovery_count)) + /* Extra reference to avoid race with rh_stop_recovery */ + atomic_inc(&rh->recovery_in_flight); + + while (!down_trylock(&rh->recovery_count)) { + atomic_inc(&rh->recovery_in_flight); if (__rh_recovery_prepare(rh) <= 0) { + atomic_dec(&rh->recovery_in_flight); up(&rh->recovery_count); break; } + } + + /* Drop the extra reference */ + if (atomic_dec_and_test(&rh->recovery_in_flight)) + wake_up_all(&_kmirrord_recovery_stopped); } /* @@ -1177,6 +1192,11 @@ static void mirror_postsuspend(struct dm_target *ti) struct dirty_log *log = ms->rh.log; rh_stop_recovery(&ms->rh); + + /* Wait for all I/O we generated to complete */ + wait_event(_kmirrord_recovery_stopped, + !atomic_read(&ms->rh.recovery_in_flight)); + if (log->type->suspend && log->type->suspend(log)) /* FIXME: need better error handling */ DMWARN("log suspend failed"); diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c index c5a16c5..6f9fcd4 100644 --- a/drivers/md/dm-round-robin.c +++ b/drivers/md/dm-round-robin.c @@ -136,7 +136,7 @@ static int rr_add_path(struct path_selector *ps, struct path *path, path->pscontext = pi; - list_add(&pi->list, &s->valid_paths); + list_add_tail(&pi->list, &s->valid_paths); return 0; } diff --git a/drivers/md/dm.c b/drivers/md/dm.c index b5764a8..fc4f743 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1285,7 +1285,7 @@ int dm_suspend(struct mapped_device *md, int do_lockfs) down(&md->suspend_lock); if (dm_suspended(md)) - goto out; + goto out_unlock; map = dm_get_table(md); @@ -1361,6 +1361,8 @@ out: } dm_table_put(map); + +out_unlock: up(&md->suspend_lock); return r; } diff --git a/drivers/md/md.c b/drivers/md/md.c index 50ab4a9..8cbf9c9 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3200,6 +3200,7 @@ static int do_md_run(mddev_t * mddev) mddev->changed = 1; md_new_event(mddev); + kobject_uevent(&mddev->gendisk->kobj, KOBJ_CHANGE); return 0; } @@ -4485,6 +4486,7 @@ static int md_thread(void * arg) * many dirty RAID5 blocks. */ + current->flags |= PF_NOFREEZE; allow_signal(SIGKILL); while (!kthread_should_stop()) { @@ -4501,7 +4503,6 @@ static int md_thread(void * arg) test_bit(THREAD_WAKEUP, &thread->flags) || kthread_should_stop(), thread->timeout); - try_to_freeze(); clear_bit(THREAD_WAKEUP, &thread->flags); diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index e14f457..69c3e20 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3659,7 +3659,7 @@ static void end_reshape(raid5_conf_t *conf) bdev = bdget_disk(conf->mddev->gendisk, 0); if (bdev) { mutex_lock(&bdev->bd_inode->i_mutex); - i_size_write(bdev->bd_inode, conf->mddev->array_size << 10); + i_size_write(bdev->bd_inode, (loff_t)conf->mddev->array_size << 10); mutex_unlock(&bdev->bd_inode->i_mutex); bdput(bdev); } diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c index d9953f7..5297a36 100644 --- a/drivers/media/common/saa7146_i2c.c +++ b/drivers/media/common/saa7146_i2c.c @@ -217,11 +217,9 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d } /* wait until we get a transfer done or error */ timeout = jiffies + HZ/100 + 1; /* 10ms */ + /* first read usually delivers bogus results... */ + saa7146_i2c_status(dev); while(1) { - /** - * first read usually delivers bogus results... - */ - saa7146_i2c_status(dev); status = saa7146_i2c_status(dev); if ((status & 0x3) != 1) break; @@ -232,10 +230,10 @@ static int saa7146_i2c_writeout(struct saa7146_dev *dev, u32* dword, int short_d DEB_I2C(("saa7146_i2c_writeout: timed out waiting for end of xfer\n")); return -EIO; } - if ((++trial < 20) && short_delay) + if (++trial < 50 && short_delay) udelay(10); else - msleep(1); + msleep(1); } } diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 2853ea1..87fb75f 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -246,7 +246,7 @@ static int flexcop_usb_i2c_req(struct flexcop_usb *fc_usb, wIndex = (chipaddr << 8 ) | addr; deb_i2c("i2c %2d: %02x %02x %02x %02x %02x %02x\n",func,request_type,req, - ((wValue && 0xff) << 8),wValue >> 8,((wIndex && 0xff) << 8),wIndex >> 8); + wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8); len = usb_control_msg(fc_usb->udev,pipe, req, diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 2cc5caa..a263b3f 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -26,7 +26,7 @@ config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 + select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. @@ -34,7 +34,7 @@ config DVB_USB_DIBUSB_MB tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" depends on DVB_USB select DVB_DIB3000MB - select DVB_TUNER_MT2060 + select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -55,7 +55,7 @@ config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 + select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -70,7 +70,7 @@ config DVB_USB_DIB0700 tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 + select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The USB bridge is also present in devices having the DiB7700 DVB-T-USB @@ -87,7 +87,7 @@ config DVB_USB_UMT_010 tristate "HanfTek UMT-010 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 + select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. @@ -153,7 +153,7 @@ config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB select DVB_DIB3000MC - select DVB_TUNER_MT2060 + select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 080fa25..aebb8d6 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -276,6 +276,8 @@ config DVB_TDA826X config DVB_TUNER_MT2060 tristate "Microtune MT2060 silicon IF tuner" + depends on I2C + default m if DVB_FE_CUSTOMISE help A driver for the silicon IF tuner MT2060 from Microtune. diff --git a/drivers/media/dvb/frontends/bcm3510.h b/drivers/media/dvb/frontends/bcm3510.h index 6dfa839..7e4f95e 100644 --- a/drivers/media/dvb/frontends/bcm3510.h +++ b/drivers/media/dvb/frontends/bcm3510.h @@ -34,7 +34,7 @@ struct bcm3510_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_BCM3510) || defined(CONFIG_DVB_BCM3510_MODULE) +#if defined(CONFIG_DVB_BCM3510) || (defined(CONFIG_DVB_BCM3510_MODULE) && defined(MODULE)) extern struct dvb_frontend* bcm3510_attach(const struct bcm3510_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/cx22700.h b/drivers/media/dvb/frontends/cx22700.h index 10286cc..7ac3369 100644 --- a/drivers/media/dvb/frontends/cx22700.h +++ b/drivers/media/dvb/frontends/cx22700.h @@ -31,7 +31,7 @@ struct cx22700_config u8 demod_address; }; -#if defined(CONFIG_DVB_CX22700) || defined(CONFIG_DVB_CX22700_MODULE) +#if defined(CONFIG_DVB_CX22700) || (defined(CONFIG_DVB_CX22700_MODULE) && defined(MODULE)) extern struct dvb_frontend* cx22700_attach(const struct cx22700_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index bc217dd..9cd64da 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -41,7 +41,7 @@ struct cx22702_config u8 output_mode; }; -#if defined(CONFIG_DVB_CX22702) || defined(CONFIG_DVB_CX22702_MODULE) +#if defined(CONFIG_DVB_CX22702) || (defined(CONFIG_DVB_CX22702_MODULE) && defined(MODULE)) extern struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/cx24110.h b/drivers/media/dvb/frontends/cx24110.h index c9d5ae2..0ca3af4 100644 --- a/drivers/media/dvb/frontends/cx24110.h +++ b/drivers/media/dvb/frontends/cx24110.h @@ -41,7 +41,7 @@ static inline int cx24110_pll_write(struct dvb_frontend *fe, u32 val) { return r; } -#if defined(CONFIG_DVB_CX24110) || defined(CONFIG_DVB_CX24110_MODULE) +#if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) extern struct dvb_frontend* cx24110_attach(const struct cx24110_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/cx24123.h b/drivers/media/dvb/frontends/cx24123.h index 57a1dae..84f9e4f 100644 --- a/drivers/media/dvb/frontends/cx24123.h +++ b/drivers/media/dvb/frontends/cx24123.h @@ -35,7 +35,7 @@ struct cx24123_config int lnb_polarity; }; -#if defined(CONFIG_DVB_CX24123) || defined(CONFIG_DVB_CX24123_MODULE) +#if defined(CONFIG_DVB_CX24123) || (defined(CONFIG_DVB_CX24123_MODULE) && defined(MODULE)) extern struct dvb_frontend* cx24123_attach(const struct cx24123_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/dib3000.h b/drivers/media/dvb/frontends/dib3000.h index 0caac3f..a6d3854 100644 --- a/drivers/media/dvb/frontends/dib3000.h +++ b/drivers/media/dvb/frontends/dib3000.h @@ -41,7 +41,7 @@ struct dib_fe_xfer_ops int (*tuner_pass_ctrl)(struct dvb_frontend *fe, int onoff, u8 pll_ctrl); }; -#if defined(CONFIG_DVB_DIB3000MB) || defined(CONFIG_DVB_DIB3000MB_MODULE) +#if defined(CONFIG_DVB_DIB3000MB) || (defined(CONFIG_DVB_DIB3000MB_MODULE) && defined(MODULE)) extern struct dvb_frontend* dib3000mb_attach(const struct dib3000_config* config, struct i2c_adapter* i2c, struct dib_fe_xfer_ops *xfer_ops); #else diff --git a/drivers/media/dvb/frontends/dib3000mc.h b/drivers/media/dvb/frontends/dib3000mc.h index 0d6fdef..72d4757 100644 --- a/drivers/media/dvb/frontends/dib3000mc.h +++ b/drivers/media/dvb/frontends/dib3000mc.h @@ -39,7 +39,7 @@ struct dib3000mc_config { #define DEFAULT_DIB3000MC_I2C_ADDRESS 16 #define DEFAULT_DIB3000P_I2C_ADDRESS 24 -#if defined(CONFIG_DVB_DIB3000MC) || defined(CONFIG_DVB_DIB3000MC_MODULE) +#if defined(CONFIG_DVB_DIB3000MC) || (defined(CONFIG_DVB_DIB3000MC_MODULE) && defined(MODULE)) extern struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg); #else static inline struct dvb_frontend * dib3000mc_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib3000mc_config *cfg) diff --git a/drivers/media/dvb/frontends/isl6421.h b/drivers/media/dvb/frontends/isl6421.h index 1916e3e..ea7f78a 100644 --- a/drivers/media/dvb/frontends/isl6421.h +++ b/drivers/media/dvb/frontends/isl6421.h @@ -39,7 +39,7 @@ #define ISL6421_ISEL1 0x20 #define ISL6421_DCL 0x40 -#if defined(CONFIG_DVB_ISL6421) || defined(CONFIG_DVB_ISL6421_MODULE) +#if defined(CONFIG_DVB_ISL6421) || (defined(CONFIG_DVB_ISL6421_MODULE) && defined(MODULE)) /* override_set and override_clear control which system register bits (above) to always set & clear */ extern struct dvb_frontend *isl6421_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 i2c_addr, u8 override_set, u8 override_clear); diff --git a/drivers/media/dvb/frontends/l64781.h b/drivers/media/dvb/frontends/l64781.h index 21ba4a2..cd15f76 100644 --- a/drivers/media/dvb/frontends/l64781.h +++ b/drivers/media/dvb/frontends/l64781.h @@ -31,7 +31,7 @@ struct l64781_config u8 demod_address; }; -#if defined(CONFIG_DVB_L64781) || defined(CONFIG_DVB_L64781_MODULE) +#if defined(CONFIG_DVB_L64781) || (defined(CONFIG_DVB_L64781_MODULE) && defined(MODULE)) extern struct dvb_frontend* l64781_attach(const struct l64781_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/lgdt330x.h b/drivers/media/dvb/frontends/lgdt330x.h index 3f96b48..9950590 100644 --- a/drivers/media/dvb/frontends/lgdt330x.h +++ b/drivers/media/dvb/frontends/lgdt330x.h @@ -52,7 +52,7 @@ struct lgdt330x_config int clock_polarity_flip; }; -#if defined(CONFIG_DVB_LGDT330X) || defined(CONFIG_DVB_LGDT330X_MODULE) +#if defined(CONFIG_DVB_LGDT330X) || (defined(CONFIG_DVB_LGDT330X_MODULE) && defined(MODULE)) extern struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/lnbp21.h b/drivers/media/dvb/frontends/lnbp21.h index 1fe1dd1..68906ac 100644 --- a/drivers/media/dvb/frontends/lnbp21.h +++ b/drivers/media/dvb/frontends/lnbp21.h @@ -39,7 +39,7 @@ #include <linux/dvb/frontend.h> -#if defined(CONFIG_DVB_LNBP21) || defined(CONFIG_DVB_LNBP21_MODULE) +#if defined(CONFIG_DVB_LNBP21) || (defined(CONFIG_DVB_LNBP21_MODULE) && defined(MODULE)) /* override_set and override_clear control which system register bits (above) to always set & clear */ extern struct dvb_frontend *lnbp21_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 override_set, u8 override_clear); #else diff --git a/drivers/media/dvb/frontends/mt2060.h b/drivers/media/dvb/frontends/mt2060.h index 34a37c2..0a86eab 100644 --- a/drivers/media/dvb/frontends/mt2060.h +++ b/drivers/media/dvb/frontends/mt2060.h @@ -30,6 +30,14 @@ struct mt2060_config { u8 clock_out; /* 0 = off, 1 = CLK/4, 2 = CLK/2, 3 = CLK/1 */ }; +#if defined(CONFIG_DVB_TUNER_MT2060) || (defined(CONFIG_DVB_TUNER_MT2060_MODULE) && defined(MODULE)) extern struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1); +#else +static inline struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct mt2060_config *cfg, u16 if1) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__); + return NULL; +} +#endif // CONFIG_DVB_TUNER_MT2060 #endif diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h index 7112fb4..cf9a150 100644 --- a/drivers/media/dvb/frontends/mt312.h +++ b/drivers/media/dvb/frontends/mt312.h @@ -34,7 +34,7 @@ struct mt312_config u8 demod_address; }; -#if defined(CONFIG_DVB_MT312) || defined(CONFIG_DVB_MT312_MODULE) +#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE)) struct dvb_frontend* vp310_mt312_attach(const struct mt312_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/mt352.h b/drivers/media/dvb/frontends/mt352.h index 0035c2e..e996408 100644 --- a/drivers/media/dvb/frontends/mt352.h +++ b/drivers/media/dvb/frontends/mt352.h @@ -51,7 +51,7 @@ struct mt352_config int (*demod_init)(struct dvb_frontend* fe); }; -#if defined(CONFIG_DVB_MT352) || defined(CONFIG_DVB_MT352_MODULE) +#if defined(CONFIG_DVB_MT352) || (defined(CONFIG_DVB_MT352_MODULE) && defined(MODULE)) extern struct dvb_frontend* mt352_attach(const struct mt352_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/nxt200x.h b/drivers/media/dvb/frontends/nxt200x.h index 2eb220e..28bc559 100644 --- a/drivers/media/dvb/frontends/nxt200x.h +++ b/drivers/media/dvb/frontends/nxt200x.h @@ -45,7 +45,7 @@ struct nxt200x_config int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); }; -#if defined(CONFIG_DVB_NXT200X) || defined(CONFIG_DVB_NXT200X_MODULE) +#if defined(CONFIG_DVB_NXT200X) || (defined(CONFIG_DVB_NXT200X_MODULE) && defined(MODULE)) extern struct dvb_frontend* nxt200x_attach(const struct nxt200x_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/nxt6000.h b/drivers/media/dvb/frontends/nxt6000.h index 9397393..13d2251 100644 --- a/drivers/media/dvb/frontends/nxt6000.h +++ b/drivers/media/dvb/frontends/nxt6000.h @@ -33,7 +33,7 @@ struct nxt6000_config u8 clock_inversion:1; }; -#if defined(CONFIG_DVB_NXT6000) || defined(CONFIG_DVB_NXT6000_MODULE) +#if defined(CONFIG_DVB_NXT6000) || (defined(CONFIG_DVB_NXT6000_MODULE) && defined(MODULE)) extern struct dvb_frontend* nxt6000_attach(const struct nxt6000_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/or51132.h b/drivers/media/dvb/frontends/or51132.h index 9718be4..add24f0 100644 --- a/drivers/media/dvb/frontends/or51132.h +++ b/drivers/media/dvb/frontends/or51132.h @@ -34,7 +34,7 @@ struct or51132_config int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); }; -#if defined(CONFIG_DVB_OR51132) || defined(CONFIG_DVB_OR51132_MODULE) +#if defined(CONFIG_DVB_OR51132) || (defined(CONFIG_DVB_OR51132_MODULE) && defined(MODULE)) extern struct dvb_frontend* or51132_attach(const struct or51132_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/or51211.h b/drivers/media/dvb/frontends/or51211.h index 10a5419..8aad840 100644 --- a/drivers/media/dvb/frontends/or51211.h +++ b/drivers/media/dvb/frontends/or51211.h @@ -37,7 +37,7 @@ struct or51211_config void (*sleep)(struct dvb_frontend * fe); }; -#if defined(CONFIG_DVB_OR51211) || defined(CONFIG_DVB_OR51211_MODULE) +#if defined(CONFIG_DVB_OR51211) || (defined(CONFIG_DVB_OR51211_MODULE) && defined(MODULE)) extern struct dvb_frontend* or51211_attach(const struct or51211_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h index efc54d7..1555870 100644 --- a/drivers/media/dvb/frontends/s5h1420.h +++ b/drivers/media/dvb/frontends/s5h1420.h @@ -34,7 +34,7 @@ struct s5h1420_config u8 invert:1; }; -#if defined(CONFIG_DVB_S5H1420) || defined(CONFIG_DVB_S5H1420_MODULE) +#if defined(CONFIG_DVB_S5H1420) || (defined(CONFIG_DVB_S5H1420_MODULE) && defined(MODULE)) extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/sp8870.h b/drivers/media/dvb/frontends/sp8870.h index 4cf27d3..909cefe 100644 --- a/drivers/media/dvb/frontends/sp8870.h +++ b/drivers/media/dvb/frontends/sp8870.h @@ -35,7 +35,7 @@ struct sp8870_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_SP8870) || defined(CONFIG_DVB_SP8870_MODULE) +#if defined(CONFIG_DVB_SP8870) || (defined(CONFIG_DVB_SP8870_MODULE) && defined(MODULE)) extern struct dvb_frontend* sp8870_attach(const struct sp8870_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/sp887x.h b/drivers/media/dvb/frontends/sp887x.h index cab7ea6..7ee78d7 100644 --- a/drivers/media/dvb/frontends/sp887x.h +++ b/drivers/media/dvb/frontends/sp887x.h @@ -17,7 +17,7 @@ struct sp887x_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_SP887X) || defined(CONFIG_DVB_SP887X_MODULE) +#if defined(CONFIG_DVB_SP887X) || (defined(CONFIG_DVB_SP887X_MODULE) && defined(MODULE)) extern struct dvb_frontend* sp887x_attach(const struct sp887x_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/stv0297.h b/drivers/media/dvb/frontends/stv0297.h index 760b80d..69f4515 100644 --- a/drivers/media/dvb/frontends/stv0297.h +++ b/drivers/media/dvb/frontends/stv0297.h @@ -42,7 +42,7 @@ struct stv0297_config u8 stop_during_read:1; }; -#if defined(CONFIG_DVB_STV0297) || defined(CONFIG_DVB_STV0297_MODULE) +#if defined(CONFIG_DVB_STV0297) || (defined(CONFIG_DVB_STV0297_MODULE) && defined(MODULE)) extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/stv0299.h b/drivers/media/dvb/frontends/stv0299.h index 7ef2520..33df949 100644 --- a/drivers/media/dvb/frontends/stv0299.h +++ b/drivers/media/dvb/frontends/stv0299.h @@ -89,7 +89,7 @@ struct stv0299_config int (*set_symbol_rate)(struct dvb_frontend* fe, u32 srate, u32 ratio); }; -#if defined(CONFIG_DVB_STV0299) || defined(CONFIG_DVB_STV0299_MODULE) +#if defined(CONFIG_DVB_STV0299) || (defined(CONFIG_DVB_STV0299_MODULE) && defined(MODULE)) extern struct dvb_frontend* stv0299_attach(const struct stv0299_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/tda10021.h b/drivers/media/dvb/frontends/tda10021.h index d68ae20..e3da780 100644 --- a/drivers/media/dvb/frontends/tda10021.h +++ b/drivers/media/dvb/frontends/tda10021.h @@ -32,7 +32,7 @@ struct tda10021_config u8 demod_address; }; -#if defined(CONFIG_DVB_TDA10021) || defined(CONFIG_DVB_TDA10021_MODULE) +#if defined(CONFIG_DVB_TDA10021) || (defined(CONFIG_DVB_TDA10021_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda10021_attach(const struct tda10021_config* config, struct i2c_adapter* i2c, u8 pwm); #else diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h index e28fca0..605ad2d 100644 --- a/drivers/media/dvb/frontends/tda1004x.h +++ b/drivers/media/dvb/frontends/tda1004x.h @@ -71,7 +71,7 @@ struct tda1004x_config int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; -#if defined(CONFIG_DVB_TDA1004X) || defined(CONFIG_DVB_TDA1004X_MODULE) +#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c); diff --git a/drivers/media/dvb/frontends/tda10086.h b/drivers/media/dvb/frontends/tda10086.h index 18457ad..ed584a8 100644 --- a/drivers/media/dvb/frontends/tda10086.h +++ b/drivers/media/dvb/frontends/tda10086.h @@ -35,7 +35,7 @@ struct tda10086_config u8 invert; }; -#if defined(CONFIG_DVB_TDA10086) || defined(CONFIG_DVB_TDA10086_MODULE) +#if defined(CONFIG_DVB_TDA10086) || (defined(CONFIG_DVB_TDA10086_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda10086_attach(const struct tda10086_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/tda8083.h b/drivers/media/dvb/frontends/tda8083.h index aae15bd..2d33079 100644 --- a/drivers/media/dvb/frontends/tda8083.h +++ b/drivers/media/dvb/frontends/tda8083.h @@ -35,7 +35,7 @@ struct tda8083_config u8 demod_address; }; -#if defined(CONFIG_DVB_TDA8083) || defined(CONFIG_DVB_TDA8083_MODULE) +#if defined(CONFIG_DVB_TDA8083) || (defined(CONFIG_DVB_TDA8083_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda8083_attach(const struct tda8083_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/tda826x.c b/drivers/media/dvb/frontends/tda826x.c index eeab26b..34815b0 100644 --- a/drivers/media/dvb/frontends/tda826x.c +++ b/drivers/media/dvb/frontends/tda826x.c @@ -121,7 +121,7 @@ static struct dvb_tuner_ops tda826x_tuner_ops = { .info = { .name = "Philips TDA826X", .frequency_min = 950000, - .frequency_min = 2175000 + .frequency_max = 2175000 }, .release = tda826x_release, .sleep = tda826x_sleep, diff --git a/drivers/media/dvb/frontends/tda826x.h b/drivers/media/dvb/frontends/tda826x.h index 83998c0..ad99811 100644 --- a/drivers/media/dvb/frontends/tda826x.h +++ b/drivers/media/dvb/frontends/tda826x.h @@ -35,7 +35,7 @@ * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector. * @return FE pointer on success, NULL on failure. */ -#if defined(CONFIG_DVB_TDA826X) || defined(CONFIG_DVB_TDA826X_MODULE) +#if defined(CONFIG_DVB_TDA826X) || (defined(CONFIG_DVB_TDA826X_MODULE) && defined(MODULE)) extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c, int has_loopthrough); diff --git a/drivers/media/dvb/frontends/tua6100.h b/drivers/media/dvb/frontends/tua6100.h index 8f98033..03a665e 100644 --- a/drivers/media/dvb/frontends/tua6100.h +++ b/drivers/media/dvb/frontends/tua6100.h @@ -34,7 +34,7 @@ #include <linux/i2c.h> #include "dvb_frontend.h" -#if defined(CONFIG_DVB_TUA6100) || defined(CONFIG_DVB_TUA6100_MODULE) +#if defined(CONFIG_DVB_TUA6100) || (defined(CONFIG_DVB_TUA6100_MODULE) && defined(MODULE)) extern struct dvb_frontend *tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c); #else static inline struct dvb_frontend* tua6100_attach(struct dvb_frontend *fe, int addr, struct i2c_adapter *i2c) diff --git a/drivers/media/dvb/frontends/ves1820.h b/drivers/media/dvb/frontends/ves1820.h index f0c9dde..e4a2a32 100644 --- a/drivers/media/dvb/frontends/ves1820.h +++ b/drivers/media/dvb/frontends/ves1820.h @@ -41,7 +41,7 @@ struct ves1820_config u8 selagc:1; }; -#if defined(CONFIG_DVB_VES1820) || defined(CONFIG_DVB_VES1820_MODULE) +#if defined(CONFIG_DVB_VES1820) || (defined(CONFIG_DVB_VES1820_MODULE) && defined(MODULE)) extern struct dvb_frontend* ves1820_attach(const struct ves1820_config* config, struct i2c_adapter* i2c, u8 pwm); #else diff --git a/drivers/media/dvb/frontends/ves1x93.h b/drivers/media/dvb/frontends/ves1x93.h index 395fed3..d507f89 100644 --- a/drivers/media/dvb/frontends/ves1x93.h +++ b/drivers/media/dvb/frontends/ves1x93.h @@ -40,7 +40,7 @@ struct ves1x93_config u8 invert_pwm:1; }; -#if defined(CONFIG_DVB_VES1X93) || defined(CONFIG_DVB_VES1X93_MODULE) +#if defined(CONFIG_DVB_VES1X93) || (defined(CONFIG_DVB_VES1X93_MODULE) && defined(MODULE)) extern struct dvb_frontend* ves1x93_attach(const struct ves1x93_config* config, struct i2c_adapter* i2c); #else diff --git a/drivers/media/dvb/frontends/zl10353.h b/drivers/media/dvb/frontends/zl10353.h index 79a9472..0bc0109 100644 --- a/drivers/media/dvb/frontends/zl10353.h +++ b/drivers/media/dvb/frontends/zl10353.h @@ -36,7 +36,7 @@ struct zl10353_config int parallel_ts; }; -#if defined(CONFIG_DVB_ZL10353) || defined(CONFIG_DVB_ZL10353_MODULE) +#if defined(CONFIG_DVB_ZL10353) || (defined(CONFIG_DVB_ZL10353_MODULE) && defined(MODULE)) extern struct dvb_frontend* zl10353_attach(const struct zl10353_config *config, struct i2c_adapter *i2c); #else diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 2a2e9b4..cd5ec48 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -46,7 +46,14 @@ #include "bsbe1.h" #include "bsru6.h" -#define DEBIADDR_IR 0x1234 +/* + * Regarding DEBIADDR_IR: + * Some CI modules hang if random addresses are read. + * Using address 0x4000 for the IR read means that we + * use the same address as for CI version, which should + * be a safe default. + */ +#define DEBIADDR_IR 0x4000 #define DEBIADDR_CICONTROL 0x0000 #define DEBIADDR_CIVERSION 0x4000 #define DEBIADDR_IO 0x1000 @@ -1028,6 +1035,7 @@ static void frontend_init(struct budget_ci *budget_ci) case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) budget_ci->tuner_pll_address = 0x60; + philips_tdm1316l_config.invert = 1; budget_ci->budget.dvb_frontend = dvb_attach(tda10046_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index fbe5b61..bf26755 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -186,7 +186,7 @@ config VIDEO_KS0127 config VIDEO_SAA7110 tristate "Philips SAA7110 video decoder" - depends on VIDEO_V4L1 + depends on VIDEO_V4L1 && I2C ---help--- Support for the Philips SAA7110 video decoders. diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index a84903e..21ebe8f 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -4001,7 +4001,7 @@ static void __devinit init_PXC200(struct bttv *btv) * - sleep 1ms * - write 0x0E * read from GPIO_DATA into buf (uint_32) - * - if ( buf>>18 & 0x01 ) || ( buf>>19 && 0x01 != 0 ) + * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) * error. ERROR_CPLD_Check_Failed. */ /* ----------------------------------------------------------------------- */ diff --git a/drivers/media/video/cx88/cx88-input.c b/drivers/media/video/cx88/cx88-input.c index ee48995..57e1c02 100644 --- a/drivers/media/video/cx88/cx88-input.c +++ b/drivers/media/video/cx88/cx88-input.c @@ -202,13 +202,19 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->sampling = 1; break; case CX88_BOARD_WINFAST_DTV2000H: - case CX88_BOARD_WINFAST2000XP_EXPERT: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; ir->mask_keyup = 0x100; ir->polling = 50; /* ms */ break; + case CX88_BOARD_WINFAST2000XP_EXPERT: + ir_codes = ir_codes_winfast; + ir->gpio_addr = MO_GP0_IO; + ir->mask_keycode = 0x8f8; + ir->mask_keyup = 0x100; + ir->polling = 1; /* ms */ + break; case CX88_BOARD_IODATA_GVBCTV7E: ir_codes = ir_codes_iodata_bctv7e; ir->gpio_addr = MO_GP0_IO; @@ -216,7 +222,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci) ir->mask_keydown = 0x02; ir->polling = 5; /* ms */ break; - case CX88_BOARD_PROLINK_PLAYTVPVR: + case CX88_BOARD_PROLINK_PLAYTVPVR: case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO: ir_codes = ir_codes_pixelview; ir->gpio_addr = MO_GP1_IO; diff --git a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c index df8feac..c80c26b 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c +++ b/drivers/media/video/pvrusb2/pvrusb2-cx2584x-v4l.c @@ -221,7 +221,7 @@ static unsigned int decoder_describe(struct pvr2_v4l_cx2584x *ctxt, static void decoder_reset(struct pvr2_v4l_cx2584x *ctxt) { int ret; - ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,0); + ret = pvr2_i2c_client_cmd(ctxt->client,VIDIOC_INT_RESET,NULL); pvr2_trace(PVR2_TRACE_CHIPS,"i2c cx25840 decoder_reset (ret=%d)",ret); } diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index 97e974d..bb40e90 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -711,8 +711,8 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip) dip->devbase.minor,pvr2_config_get_name(dip->config)); /* Paranoia */ - dip->v4lp = 0; - dip->stream = 0; + dip->v4lp = NULL; + dip->stream = NULL; /* Actual deallocation happens later when all internal references are gone. */ @@ -1076,7 +1076,7 @@ struct pvr2_v4l2 *pvr2_v4l2_create(struct pvr2_context *mnp) vp->vdev = kmalloc(sizeof(*vp->vdev),GFP_KERNEL); if (!vp->vdev) { kfree(vp); - return 0; + return NULL; } memset(vp->vdev,0,sizeof(*vp->vdev)); pvr2_channel_init(&vp->channel,mnp); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index c9d8e3b..51f0cfd 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -2969,7 +2969,7 @@ struct saa7134_board saa7134_boards[] = { /* Petr Baudis <pasky@ucw.cz> */ .name = "AVerMedia TV Hybrid A16AR", .audio_clock = 0x187de7, - .tuner_type = TUNER_PHILIPS_TDA8290, /* untested */ + .tuner_type = TUNER_PHILIPS_TD1316, /* untested */ .radio_type = TUNER_TEA5767, /* untested */ .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, @@ -3718,6 +3718,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_307: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: + case SAA7134_BOARD_AVERMEDIA_777: /* case SAA7134_BOARD_SABRENT_SBTTVFM: */ /* not finished yet */ case SAA7134_BOARD_VIDEOMATE_TV_PVR: case SAA7134_BOARD_VIDEOMATE_GOLD_PLUS: @@ -3734,6 +3735,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) case SAA7134_BOARD_FLYDVBT_LR301: case SAA7134_BOARD_FLYDVBTDUO: case SAA7134_BOARD_PROTEUS_2309: + case SAA7134_BOARD_AVERMEDIA_A16AR: dev->has_remote = SAA7134_REMOTE_GPIO; break; case SAA7134_BOARD_FLYDVBS_LR300: @@ -3772,7 +3774,6 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_writeb(SAA7134_GPIO_GPMODE3, 0x08); saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00); break; - case SAA7134_BOARD_AVERMEDIA_A16AR: case SAA7134_BOARD_AVERMEDIA_CARDBUS: /* power-up tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0xffffffff); diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 1ba53b5..6b61d9b 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1147,6 +1147,8 @@ static int dvb_init(struct saa7134_dev *dev) &philips_europa_config, &dev->i2c_adap); if (dev->dvb.frontend) { + dev->original_demod_sleep = dev->dvb.frontend->ops.sleep; + dev->dvb.frontend->ops.sleep = philips_europa_demod_sleep; dev->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; dev->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; dev->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index ff59911..dee8355 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -185,7 +185,6 @@ int saa7134_input_init1(struct saa7134_dev *dev) case SAA7134_BOARD_AVERMEDIA_STUDIO_305: case SAA7134_BOARD_AVERMEDIA_STUDIO_307: case SAA7134_BOARD_AVERMEDIA_GO_007_FM: - case SAA7134_BOARD_AVERMEDIA_A16AR: ir_codes = ir_codes_avermedia; mask_keycode = 0x0007C8; mask_keydown = 0x000010; @@ -194,6 +193,16 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE0, 0x4); saa_setb(SAA7134_GPIO_GPSTATUS0, 0x4); break; + case SAA7134_BOARD_AVERMEDIA_777: + case SAA7134_BOARD_AVERMEDIA_A16AR: + ir_codes = ir_codes_avermedia; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; // ms + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; case SAA7134_BOARD_KWORLD_TERMINATOR: ir_codes = ir_codes_pixelview; mask_keycode = 0x00001f; diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c index e6baaee..6b9ef73 100644 --- a/drivers/media/video/tveeprom.c +++ b/drivers/media/video/tveeprom.c @@ -468,7 +468,7 @@ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, (eeprom_data[i+6] << 8) + (eeprom_data[i+7] << 16); - if ( (eeprom_data[i + 8] && 0xf0) && + if ( (eeprom_data[i + 8] & 0xf0) && (tvee->serial_number < 0xffffff) ) { tvee->MAC_address[0] = 0x00; tvee->MAC_address[1] = 0x0D; diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index bbdba7b..db9d7df 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -44,12 +44,14 @@ */ #include <linux/kernel.h> +#include <linux/fs.h> #include <linux/module.h> +#include <linux/buffer_head.h> #include <linux/kprobes.h> -#include <linux/kallsyms.h> +#include <linux/list.h> #include <linux/init.h> -#include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/hrtimer.h> #include <scsi/scsi_cmnd.h> #ifdef CONFIG_IDE @@ -116,16 +118,16 @@ static enum ctype cptype = NONE; static int count = DEFAULT_COUNT; module_param(recur_count, int, 0644); -MODULE_PARM_DESC(recur_count, "Recurcion level for the stack overflow test,\ - default is 10"); +MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test, "\ + "default is 10"); module_param(cpoint_name, charp, 0644); -MODULE_PARM_DESC(cpoint_name, "Crash Point, where kernel is to be crashed"); -module_param(cpoint_type, charp, 06444); -MODULE_PARM_DESC(cpoint_type, "Crash Point Type, action to be taken on\ - hitting the crash point"); -module_param(cpoint_count, int, 06444); -MODULE_PARM_DESC(cpoint_count, "Crash Point Count, number of times the \ - crash point is to be hit to trigger action"); +MODULE_PARM_DESC(cpoint_name, " Crash Point, where kernel is to be crashed"); +module_param(cpoint_type, charp, 0644); +MODULE_PARM_DESC(cpoint_type, " Crash Point Type, action to be taken on "\ + "hitting the crash point"); +module_param(cpoint_count, int, 0644); +MODULE_PARM_DESC(cpoint_count, " Crash Point Count, number of times the "\ + "crash point is to be hit to trigger action"); unsigned int jp_do_irq(unsigned int irq) { @@ -155,8 +157,8 @@ void jp_ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) struct scan_control; -unsigned long jp_shrink_page_list(struct list_head *page_list, - struct scan_control *sc) +unsigned long jp_shrink_inactive_list(unsigned long max_scan, + struct zone *zone, struct scan_control *sc) { lkdtm_handler(); jprobe_return(); @@ -295,8 +297,8 @@ int lkdtm_module_init(void) lkdtm.entry = (kprobe_opcode_t*) jp_ll_rw_block; break; case MEM_SWAPOUT: - lkdtm.kp.symbol_name = "shrink_page_list"; - lkdtm.entry = (kprobe_opcode_t*) jp_shrink_page_list; + lkdtm.kp.symbol_name = "shrink_inactive_list"; + lkdtm.entry = (kprobe_opcode_t*) jp_shrink_inactive_list; break; case TIMERADD: lkdtm.kp.symbol_name = "hrtimer_start"; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 28c17d1..6e863aa 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -486,7 +486,7 @@ config SGI_IOC3_ETH_HW_TX_CSUM config MIPS_SIM_NET tristate "MIPS simulator Network device (EXPERIMENTAL)" - depends on NETDEVICES && MIPS_SIM && EXPERIMENTAL + depends on MIPS_SIM && EXPERIMENTAL help The MIPSNET device is a simple Ethernet network device which is emulated by the MIPS Simulator. @@ -2467,7 +2467,7 @@ config ISERIES_VETH config RIONET tristate "RapidIO Ethernet over messaging driver support" - depends on NETDEVICES && RAPIDIO + depends on RAPIDIO config RIONET_TX_SIZE int "Number of outbound queue entries" @@ -2833,7 +2833,7 @@ config NET_FC "SCSI generic support". config SHAPER - tristate "Traffic Shaper (EXPERIMENTAL)" + tristate "Traffic Shaper (OBSOLETE)" depends on EXPERIMENTAL ---help--- The traffic shaper is a virtual network device that allows you to @@ -2842,9 +2842,9 @@ config SHAPER these virtual devices. See <file:Documentation/networking/shaper.txt> for more information. - An alternative to this traffic shaper is the experimental - Class-Based Queuing (CBQ) scheduling support which you get if you - say Y to "QoS and/or fair queuing" above. + An alternative to this traffic shaper are traffic schedulers which + you'll get if you say Y to "QoS and/or fair queuing" in + "Networking options". To compile this driver as a module, choose M here: the module will be called shaper. If unsure, say N. diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c index 0dc70c7..aa9dd8f 100644 --- a/drivers/net/arcnet/com20020.c +++ b/drivers/net/arcnet/com20020.c @@ -337,13 +337,16 @@ static void com20020_set_mc_list(struct net_device *dev) } } -#ifdef MODULE - +#if defined(CONFIG_ARCNET_COM20020_PCI_MODULE) || \ + defined(CONFIG_ARCNET_COM20020_ISA_MODULE) EXPORT_SYMBOL(com20020_check); EXPORT_SYMBOL(com20020_found); +#endif MODULE_LICENSE("GPL"); +#ifdef MODULE + int init_module(void) { BUGLVL(D_NORMAL) printk(VERSION); diff --git a/drivers/net/b44.c b/drivers/net/b44.c index 1ec2174..474a4e3 100644 --- a/drivers/net/b44.c +++ b/drivers/net/b44.c @@ -908,8 +908,9 @@ static irqreturn_t b44_interrupt(int irq, void *dev_id) istat = br32(bp, B44_ISTAT); imask = br32(bp, B44_IMASK); - /* ??? What the fuck is the purpose of the interrupt mask - * ??? register if we have to mask it out by hand anyways? + /* The interrupt mask register controls which interrupt bits + * will actually raise an interrupt to the CPU when set by hw/firmware, + * but doesn't mask off the bits. */ istat &= imask; if (istat) { diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index c0bbdda..17a4611 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4692,6 +4692,8 @@ static int bond_check_params(struct bond_params *params) return 0; } +static struct lock_class_key bonding_netdev_xmit_lock_key; + /* Create a new bond based on the specified name and bonding parameters. * Caller must NOT hold rtnl_lock; we need to release it here before we * set up our sysfs entries. @@ -4727,6 +4729,9 @@ int bond_create(char *name, struct bond_params *params, struct bonding **newbond if (res < 0) { goto out_bond; } + + lockdep_set_class(&bond_dev->_xmit_lock, &bonding_netdev_xmit_lock_key); + if (newbond) *newbond = bond_dev->priv; diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c index 966b563..a03d781 100644 --- a/drivers/net/cris/eth_v10.c +++ b/drivers/net/cris/eth_v10.c @@ -509,6 +509,8 @@ etrax_ethernet_init(void) * does not share cacheline with any other data (to avoid cache bug) */ RxDescList[i].skb = dev_alloc_skb(MAX_MEDIA_DATA_SIZE + 2 * L1_CACHE_BYTES); + if (!RxDescList[i].skb) + return -ENOMEM; RxDescList[i].descr.ctrl = 0; RxDescList[i].descr.sw_len = MAX_MEDIA_DATA_SIZE; RxDescList[i].descr.next = virt_to_phys(&RxDescList[i + 1]); diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 8d04752..726ec5e 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -4800,6 +4800,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) if (adapter->hw.phy_type == e1000_phy_igp_3) e1000_phy_powerdown_workaround(&adapter->hw); + if (netif_running(netdev)) + e1000_free_irq(adapter); + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); @@ -4830,6 +4833,10 @@ e1000_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); + if (netif_running(netdev) && (err = e1000_request_irq(adapter))) + return err; + + e1000_power_up_phy(adapter); e1000_reset(adapter); E1000_WRITE_REG(&adapter->hw, WUS, ~0); diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index b40724f..39ad9f7 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -39,7 +39,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0034" +#define DRV_VERSION "EHEA_0043" #define EHEA_MSG_DEFAULT (NETIF_MSG_LINK | NETIF_MSG_TIMER \ | NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) @@ -105,9 +105,6 @@ #define EHEA_BCMC_VLANID_ALL 0x01 #define EHEA_BCMC_VLANID_SINGLE 0x00 -/* Use this define to kmallocate pHYP control blocks */ -#define H_CB_ALIGNMENT 4096 - #define EHEA_CACHE_LINE 128 /* Memory Regions */ diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c index 82eb2fb..9f57c2e 100644 --- a/drivers/net/ehea/ehea_ethtool.c +++ b/drivers/net/ehea/ehea_ethtool.c @@ -238,7 +238,7 @@ static void ehea_get_ethtool_stats(struct net_device *dev, data[i++] = port->port_res[0].swqe_refill_th; data[i++] = port->resets; - cb6 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb6 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb6) { ehea_error("no mem for cb6"); return; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 4538c99..6ad6961 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -92,7 +92,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev) memset(stats, 0, sizeof(*stats)); - cb2 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb2) { ehea_error("no mem for cb2"); goto out; @@ -586,8 +586,8 @@ int ehea_sense_port_attr(struct ehea_port *port) u64 hret; struct hcp_ehea_port_cb0 *cb0; - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); /* May be called via */ - if (!cb0) { /* ehea_neq_tasklet() */ + cb0 = kzalloc(PAGE_SIZE, GFP_ATOMIC); /* May be called via */ + if (!cb0) { /* ehea_neq_tasklet() */ ehea_error("no mem for cb0"); ret = -ENOMEM; goto out; @@ -670,7 +670,7 @@ int ehea_set_portspeed(struct ehea_port *port, u32 port_speed) u64 hret; int ret = 0; - cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb4) { ehea_error("no mem for cb4"); ret = -ENOMEM; @@ -985,7 +985,7 @@ static int ehea_configure_port(struct ehea_port *port) struct hcp_ehea_port_cb0 *cb0; ret = -ENOMEM; - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb0) goto out; @@ -1443,7 +1443,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) goto out; } - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb0) { ehea_error("no mem for cb0"); ret = -ENOMEM; @@ -1501,7 +1501,7 @@ static void ehea_promiscuous(struct net_device *dev, int enable) if ((enable && port->promisc) || (!enable && !port->promisc)) return; - cb7 = kzalloc(H_CB_ALIGNMENT, GFP_ATOMIC); + cb7 = kzalloc(PAGE_SIZE, GFP_ATOMIC); if (!cb7) { ehea_error("no mem for cb7"); goto out; @@ -1870,7 +1870,7 @@ static void ehea_vlan_rx_register(struct net_device *dev, port->vgrp = grp; - cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb1) { ehea_error("no mem for cb1"); goto out; @@ -1899,7 +1899,7 @@ static void ehea_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) int index; u64 hret; - cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb1) { ehea_error("no mem for cb1"); goto out; @@ -1935,7 +1935,7 @@ static void ehea_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) if (port->vgrp) port->vgrp->vlan_devices[vid] = NULL; - cb1 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb1 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb1) { ehea_error("no mem for cb1"); goto out; @@ -1968,7 +1968,7 @@ int ehea_activate_qp(struct ehea_adapter *adapter, struct ehea_qp *qp) u64 dummy64 = 0; struct hcp_modify_qp_cb0* cb0; - cb0 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb0 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb0) { ret = -ENOMEM; goto out; @@ -2269,7 +2269,7 @@ int ehea_sense_adapter_attr(struct ehea_adapter *adapter) u64 hret; int ret; - cb = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb) { ret = -ENOMEM; goto out; @@ -2340,7 +2340,7 @@ static int ehea_setup_single_port(struct ehea_port *port, goto out; /* Enable Jumbo frames */ - cb4 = kzalloc(H_CB_ALIGNMENT, GFP_KERNEL); + cb4 = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!cb4) { ehea_error("no mem for cb4"); } else { diff --git a/drivers/net/ehea/ehea_phyp.c b/drivers/net/ehea/ehea_phyp.c index 0b51a8c..0cfc2bc 100644 --- a/drivers/net/ehea/ehea_phyp.c +++ b/drivers/net/ehea/ehea_phyp.c @@ -506,7 +506,7 @@ u64 ehea_h_register_rpage_mr(const u64 adapter_handle, const u64 mr_handle, const u8 pagesize, const u8 queue_type, const u64 log_pageaddr, const u64 count) { - if ((count > 1) && (log_pageaddr & 0xfff)) { + if ((count > 1) && (log_pageaddr & ~PAGE_MASK)) { ehea_error("not on pageboundary"); return H_PARAMETER; } diff --git a/drivers/net/ehea/ehea_phyp.h b/drivers/net/ehea/ehea_phyp.h index fa51e3b..919f94b 100644 --- a/drivers/net/ehea/ehea_phyp.h +++ b/drivers/net/ehea/ehea_phyp.h @@ -81,14 +81,16 @@ static inline u32 get_longbusy_msecs(int long_busy_ret_code) static inline void hcp_epas_ctor(struct h_epas *epas, u64 paddr_kernel, u64 paddr_user) { - epas->kernel.addr = ioremap(paddr_kernel, PAGE_SIZE); + /* To support 64k pages we must round to 64k page boundary */ + epas->kernel.addr = ioremap((paddr_kernel & PAGE_MASK), PAGE_SIZE) + + (paddr_kernel & ~PAGE_MASK); epas->user.addr = paddr_user; } static inline void hcp_epas_dtor(struct h_epas *epas) { if (epas->kernel.addr) - iounmap(epas->kernel.addr); + iounmap((void __iomem*)((u64)epas->kernel.addr & PAGE_MASK)); epas->user.addr = 0; epas->kernel.addr = 0; diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c index 3e18623..72ef7bd 100644 --- a/drivers/net/ehea/ehea_qmr.c +++ b/drivers/net/ehea/ehea_qmr.c @@ -209,11 +209,11 @@ int ehea_destroy_cq(struct ehea_cq *cq) { u64 adapter_handle, hret; - adapter_handle = cq->adapter->handle; - if (!cq) return 0; + adapter_handle = cq->adapter->handle; + /* deregister all previous registered pages */ hret = ehea_h_free_resource(adapter_handle, cq->fw_handle); if (hret != H_SUCCESS) { @@ -512,7 +512,7 @@ int ehea_reg_mr_adapter(struct ehea_adapter *adapter) start = KERNELBASE; end = (u64)high_memory; - nr_pages = (end - start) / PAGE_SIZE; + nr_pages = (end - start) / EHEA_PAGESIZE; pt = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!pt) { @@ -538,9 +538,9 @@ int ehea_reg_mr_adapter(struct ehea_adapter *adapter) if (nr_pages > 1) { u64 num_pages = min(nr_pages, (u64)512); for (i = 0; i < num_pages; i++) - pt[i] = virt_to_abs((void*)(((u64)start) - + ((k++) * - PAGE_SIZE))); + pt[i] = virt_to_abs((void*)(((u64)start) + + ((k++) * + EHEA_PAGESIZE))); hret = ehea_h_register_rpage_mr(adapter->handle, adapter->mr.handle, 0, @@ -548,8 +548,9 @@ int ehea_reg_mr_adapter(struct ehea_adapter *adapter) num_pages); nr_pages -= num_pages; } else { - u64 abs_adr = virt_to_abs((void*)(((u64)start) - + (k * PAGE_SIZE))); + u64 abs_adr = virt_to_abs((void*)(((u64)start) + + (k * EHEA_PAGESIZE))); + hret = ehea_h_register_rpage_mr(adapter->handle, adapter->mr.handle, 0, 0, abs_adr,1); diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 8e39849..06e4f77 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -68,8 +68,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.67" -#define DRV_MODULE_RELDATE "October 18, 2006" +#define DRV_MODULE_VERSION "3.68" +#define DRV_MODULE_RELDATE "November 02, 2006" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -6014,7 +6014,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tg3_abort_hw(tp, 1); } - if ((tp->tg3_flags2 & TG3_FLG2_MII_SERDES) && reset_phy) + if (reset_phy) tg3_phy_reset(tp); err = tg3_chip_reset(tp); @@ -6574,7 +6574,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32(GRC_LOCAL_CTRL, tp->grc_local_ctrl); } - err = tg3_setup_phy(tp, reset_phy); + err = tg3_setup_phy(tp, 0); if (err) return err; @@ -10212,7 +10212,7 @@ skip_phy_reset: static void __devinit tg3_read_partno(struct tg3 *tp) { unsigned char vpd_data[256]; - int i; + unsigned int i; u32 magic; if (tg3_nvram_read_swab(tp, 0x0, &magic)) @@ -10258,9 +10258,9 @@ static void __devinit tg3_read_partno(struct tg3 *tp) } /* Now parse and find the part number. */ - for (i = 0; i < 256; ) { + for (i = 0; i < 254; ) { unsigned char val = vpd_data[i]; - int block_end; + unsigned int block_end; if (val == 0x82 || val == 0x91) { i = (i + 3 + @@ -10276,21 +10276,26 @@ static void __devinit tg3_read_partno(struct tg3 *tp) (vpd_data[i + 1] + (vpd_data[i + 2] << 8))); i += 3; - while (i < block_end) { + + if (block_end > 256) + goto out_not_found; + + while (i < (block_end - 2)) { if (vpd_data[i + 0] == 'P' && vpd_data[i + 1] == 'N') { int partno_len = vpd_data[i + 2]; - if (partno_len > 24) + i += 3; + if (partno_len > 24 || (partno_len + i) > 256) goto out_not_found; memcpy(tp->board_part_number, - &vpd_data[i + 3], - partno_len); + &vpd_data[i], partno_len); /* Success. */ return; } + i += 3 + vpd_data[i + 2]; } /* Part number not found. */ diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c index 2ddbec6..7d383a2 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.c @@ -189,20 +189,24 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) case BCM43xx_LED_INACTIVE: continue; case BCM43xx_LED_OFF: + case BCM43xx_LED_BCM4303_3: break; case BCM43xx_LED_ON: turn_on = 1; break; case BCM43xx_LED_ACTIVITY: + case BCM43xx_LED_BCM4303_0: turn_on = activity; break; case BCM43xx_LED_RADIO_ALL: turn_on = radio->enabled; break; case BCM43xx_LED_RADIO_A: + case BCM43xx_LED_BCM4303_2: turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A); break; case BCM43xx_LED_RADIO_B: + case BCM43xx_LED_BCM4303_1: turn_on = (radio->enabled && (phy->type == BCM43xx_PHYTYPE_B || phy->type == BCM43xx_PHYTYPE_G)); @@ -257,7 +261,8 @@ void bcm43xx_leds_update(struct bcm43xx_private *bcm, int activity) continue; #endif /* CONFIG_BCM43XX_DEBUG */ default: - assert(0); + dprintkl(KERN_INFO PFX "Bad value in leds_update," + " led->behaviour: 0x%x\n", led->behaviour); }; if (led->activelow) diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h index d3716cf..811e14a 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_leds.h +++ b/drivers/net/wireless/bcm43xx/bcm43xx_leds.h @@ -46,6 +46,12 @@ enum { /* LED behaviour values */ BCM43xx_LED_TEST_BLINKSLOW, BCM43xx_LED_TEST_BLINKMEDIUM, BCM43xx_LED_TEST_BLINKFAST, + + /* Misc values for BCM4303 */ + BCM43xx_LED_BCM4303_0 = 0x2B, + BCM43xx_LED_BCM4303_1 = 0x78, + BCM43xx_LED_BCM4303_2 = 0x2E, + BCM43xx_LED_BCM4303_3 = 0x19, }; int bcm43xx_leds_init(struct bcm43xx_private *bcm); diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c index a94c6d8..a1b7838 100644 --- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c +++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c @@ -746,7 +746,7 @@ int bcm43xx_sprom_write(struct bcm43xx_private *bcm, const u16 *sprom) if (err) goto err_ctlreg; spromctl |= 0x10; /* SPROM WRITE enable. */ - bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl); + err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl); if (err) goto err_ctlreg; /* We must burn lots of CPU cycles here, but that does not @@ -768,7 +768,7 @@ int bcm43xx_sprom_write(struct bcm43xx_private *bcm, const u16 *sprom) mdelay(20); } spromctl &= ~0x10; /* SPROM WRITE enable. */ - bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl); + err = bcm43xx_pci_write_config32(bcm, BCM43xx_PCICFG_SPROMCTL, spromctl); if (err) goto err_ctlreg; mdelay(500); @@ -1463,6 +1463,23 @@ static void handle_irq_transmit_status(struct bcm43xx_private *bcm) } } +static void drain_txstatus_queue(struct bcm43xx_private *bcm) +{ + u32 dummy; + + if (bcm->current_core->rev < 5) + return; + /* Read all entries from the microcode TXstatus FIFO + * and throw them away. + */ + while (1) { + dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_0); + if (!dummy) + break; + dummy = bcm43xx_read32(bcm, BCM43xx_MMIO_XMITSTAT_1); + } +} + static void bcm43xx_generate_noise_sample(struct bcm43xx_private *bcm) { bcm43xx_shm_write16(bcm, BCM43xx_SHM_SHARED, 0x408, 0x7F7F); @@ -3163,9 +3180,11 @@ static int estimate_periodic_work_badness(unsigned int state) static void bcm43xx_periodic_work_handler(void *d) { struct bcm43xx_private *bcm = d; + struct net_device *net_dev = bcm->net_dev; unsigned long flags; u32 savedirqs = 0; int badness; + unsigned long orig_trans_start = 0; mutex_lock(&bcm->mutex); badness = estimate_periodic_work_badness(bcm->periodic_state); @@ -3173,7 +3192,18 @@ static void bcm43xx_periodic_work_handler(void *d) /* Periodic work will take a long time, so we want it to * be preemtible. */ - netif_tx_disable(bcm->net_dev); + + netif_tx_lock_bh(net_dev); + /* We must fake a started transmission here, as we are going to + * disable TX. If we wouldn't fake a TX, it would be possible to + * trigger the netdev watchdog, if the last real TX is already + * some time on the past (slightly less than 5secs) + */ + orig_trans_start = net_dev->trans_start; + net_dev->trans_start = jiffies; + netif_stop_queue(net_dev); + netif_tx_unlock_bh(net_dev); + spin_lock_irqsave(&bcm->irq_lock, flags); bcm43xx_mac_suspend(bcm); if (bcm43xx_using_pio(bcm)) @@ -3198,6 +3228,7 @@ static void bcm43xx_periodic_work_handler(void *d) bcm43xx_pio_thaw_txqueues(bcm); bcm43xx_mac_enable(bcm); netif_wake_queue(bcm->net_dev); + net_dev->trans_start = orig_trans_start; } mmiowb(); spin_unlock_irqrestore(&bcm->irq_lock, flags); @@ -3518,6 +3549,7 @@ int bcm43xx_select_wireless_core(struct bcm43xx_private *bcm, bcm43xx_macfilter_clear(bcm, BCM43xx_MACFILTER_ASSOC); bcm43xx_macfilter_set(bcm, BCM43xx_MACFILTER_SELF, (u8 *)(bcm->net_dev->dev_addr)); bcm43xx_security_init(bcm); + drain_txstatus_queue(bcm); ieee80211softmac_start(bcm->net_dev); /* Let's go! Be careful after enabling the IRQs. diff --git a/drivers/net/wireless/hostap/hostap_plx.c b/drivers/net/wireless/hostap/hostap_plx.c index 6dfa041..bc81b13 100644 --- a/drivers/net/wireless/hostap/hostap_plx.c +++ b/drivers/net/wireless/hostap/hostap_plx.c @@ -364,7 +364,7 @@ static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, pos = 0; while (pos < CIS_MAX_LEN - 1 && cis[pos] != CISTPL_END) { - if (pos + cis[pos + 1] >= CIS_MAX_LEN) + if (pos + 2 + cis[pos + 1] > CIS_MAX_LEN) goto cis_error; switch (cis[pos]) { @@ -391,7 +391,7 @@ static int prism2_plx_check_cis(void __iomem *attr_mem, int attr_len, break; case CISTPL_MANFID: - if (cis[pos + 1] < 5) + if (cis[pos + 1] < 4) goto cis_error; manfid1 = cis[pos + 2] + (cis[pos + 3] << 8); manfid2 = cis[pos + 4] + (cis[pos + 5] << 8); diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index ecc50db..5f1b9f5 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -19,7 +19,7 @@ config PCI_MSI config PCI_MULTITHREAD_PROBE bool "PCI Multi-threaded probe (EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + depends on PCI && EXPERIMENTAL && BROKEN help Say Y here if you want the PCI core to spawn a new thread for every PCI device that is probed. This can cause a huge diff --git a/drivers/pci/htirq.c b/drivers/pci/htirq.c index 0e27f24..0a8d1cc 100644 --- a/drivers/pci/htirq.c +++ b/drivers/pci/htirq.c @@ -25,97 +25,72 @@ static DEFINE_SPINLOCK(ht_irq_lock); struct ht_irq_cfg { struct pci_dev *dev; + /* Update callback used to cope with buggy hardware */ + ht_irq_update_t *update; unsigned pos; unsigned idx; + struct ht_irq_msg msg; }; -void write_ht_irq_low(unsigned int irq, u32 data) -{ - struct ht_irq_cfg *cfg = get_irq_data(irq); - unsigned long flags; - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); -} -void write_ht_irq_high(unsigned int irq, u32 data) +void write_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg) { struct ht_irq_cfg *cfg = get_irq_data(irq); unsigned long flags; spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); -} - -u32 read_ht_irq_low(unsigned int irq) -{ - struct ht_irq_cfg *cfg = get_irq_data(irq); - unsigned long flags; - u32 data; - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); + if (cfg->msg.address_lo != msg->address_lo) { + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); + pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_lo); + } + if (cfg->msg.address_hi != msg->address_hi) { + pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); + pci_write_config_dword(cfg->dev, cfg->pos + 4, msg->address_hi); + } + if (cfg->update) + cfg->update(cfg->dev, irq, msg); spin_unlock_irqrestore(&ht_irq_lock, flags); - return data; + cfg->msg = *msg; } -u32 read_ht_irq_high(unsigned int irq) +void fetch_ht_irq_msg(unsigned int irq, struct ht_irq_msg *msg) { struct ht_irq_cfg *cfg = get_irq_data(irq); - unsigned long flags; - u32 data; - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx + 1); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); - spin_unlock_irqrestore(&ht_irq_lock, flags); - return data; + *msg = cfg->msg; } void mask_ht_irq(unsigned int irq) { struct ht_irq_cfg *cfg; - unsigned long flags; - u32 data; + struct ht_irq_msg msg; cfg = get_irq_data(irq); - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); - data |= 1; - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); + msg = cfg->msg; + msg.address_lo |= 1; + write_ht_irq_msg(irq, &msg); } void unmask_ht_irq(unsigned int irq) { struct ht_irq_cfg *cfg; - unsigned long flags; - u32 data; + struct ht_irq_msg msg; cfg = get_irq_data(irq); - spin_lock_irqsave(&ht_irq_lock, flags); - pci_write_config_byte(cfg->dev, cfg->pos + 2, cfg->idx); - pci_read_config_dword(cfg->dev, cfg->pos + 4, &data); - data &= ~1; - pci_write_config_dword(cfg->dev, cfg->pos + 4, data); - spin_unlock_irqrestore(&ht_irq_lock, flags); + msg = cfg->msg; + msg.address_lo &= ~1; + write_ht_irq_msg(irq, &msg); } /** - * ht_create_irq - create an irq and attach it to a device. + * __ht_create_irq - create an irq and attach it to a device. * @dev: The hypertransport device to find the irq capability on. * @idx: Which of the possible irqs to attach to. - * - * ht_create_irq is needs to be called for all hypertransport devices - * that generate irqs. + * @update: Function to be called when changing the htirq message * * The irq number of the new irq or a negative error value is returned. */ -int ht_create_irq(struct pci_dev *dev, int idx) +int __ht_create_irq(struct pci_dev *dev, int idx, ht_irq_update_t *update) { struct ht_irq_cfg *cfg; unsigned long flags; @@ -150,8 +125,12 @@ int ht_create_irq(struct pci_dev *dev, int idx) return -ENOMEM; cfg->dev = dev; + cfg->update = update; cfg->pos = pos; cfg->idx = 0x10 + (idx * 2); + /* Initialize msg to a value that will never match the first write. */ + cfg->msg.address_lo = 0xffffffff; + cfg->msg.address_hi = 0xffffffff; irq = create_irq(); if (irq < 0) { @@ -169,6 +148,21 @@ int ht_create_irq(struct pci_dev *dev, int idx) } /** + * ht_create_irq - create an irq and attach it to a device. + * @dev: The hypertransport device to find the irq capability on. + * @idx: Which of the possible irqs to attach to. + * + * ht_create_irq needs to be called for all hypertransport devices + * that generate irqs. + * + * The irq number of the new irq or a negative error value is returned. + */ +int ht_create_irq(struct pci_dev *dev, int idx) +{ + return __ht_create_irq(dev, idx, NULL); +} + +/** * ht_destroy_irq - destroy an irq created with ht_create_irq * * This reverses ht_create_irq removing the specified irq from @@ -186,5 +180,6 @@ void ht_destroy_irq(unsigned int irq) kfree(cfg); } +EXPORT_SYMBOL(__ht_create_irq); EXPORT_SYMBOL(ht_create_irq); EXPORT_SYMBOL(ht_destroy_irq); diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index a1d2e97..f952bfe 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -642,6 +642,9 @@ err: */ void pci_remove_sysfs_dev_files(struct pci_dev *pdev) { + if (!sysfs_initialized) + return; + if (pdev->cfg_size < 4096) sysfs_remove_bin_file(&pdev->dev.kobj, &pci_config_attr); else diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index fd9e281..94a2746 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -631,12 +631,22 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, * scanning run at their own risk, or supply a user level program * that can correctly scan. */ - sdev->inquiry = kmalloc(sdev->inquiry_len, GFP_ATOMIC); - if (sdev->inquiry == NULL) { + + /* + * Copy at least 36 bytes of INQUIRY data, so that we don't + * dereference unallocated memory when accessing the Vendor, + * Product, and Revision strings. Badly behaved devices may set + * the INQUIRY Additional Length byte to a small value, indicating + * these strings are invalid, but often they contain plausible data + * nonetheless. It doesn't matter if the device sent < 36 bytes + * total, since scsi_probe_lun() initializes inq_result with 0s. + */ + sdev->inquiry = kmemdup(inq_result, + max_t(size_t, sdev->inquiry_len, 36), + GFP_ATOMIC); + if (sdev->inquiry == NULL) return SCSI_SCAN_NO_RESPONSE; - } - memcpy(sdev->inquiry, inq_result, sdev->inquiry_len); sdev->vendor = (char *) (sdev->inquiry + 8); sdev->model = (char *) (sdev->inquiry + 16); sdev->rev = (char *) (sdev->inquiry + 32); diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h index a8f894c..69715e5 100644 --- a/drivers/serial/cpm_uart/cpm_uart.h +++ b/drivers/serial/cpm_uart/cpm_uart.h @@ -88,7 +88,7 @@ extern struct uart_cpm_port cpm_uart_ports[UART_NR]; /* these are located in their respective files */ void cpm_line_cr_cmd(int line, int cmd); -int cpm_uart_init_portdesc(void); +int __init cpm_uart_init_portdesc(void); int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); void cpm_uart_freebuf(struct uart_cpm_port *pinfo); diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c index 0abb544..7a3b97f 100644 --- a/drivers/serial/cpm_uart/cpm_uart_core.c +++ b/drivers/serial/cpm_uart/cpm_uart_core.c @@ -195,10 +195,8 @@ static void cpm_uart_start_tx(struct uart_port *port) if (cpm_uart_tx_pump(port) != 0) { if (IS_SMC(pinfo)) { smcp->smc_smcm |= SMCM_TX; - smcp->smc_smcmr |= SMCMR_TEN; } else { sccp->scc_sccm |= UART_SCCM_TX; - pinfo->sccp->scc_gsmrl |= SCC_GSMRL_ENT; } } } @@ -421,9 +419,10 @@ static int cpm_uart_startup(struct uart_port *port) /* Startup rx-int */ if (IS_SMC(pinfo)) { pinfo->smcp->smc_smcm |= SMCM_RX; - pinfo->smcp->smc_smcmr |= SMCMR_REN; + pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN); } else { pinfo->sccp->scc_sccm |= UART_SCCM_RX; + pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT); } if (!(pinfo->flags & FLAG_CONSOLE)) @@ -1350,11 +1349,10 @@ static int cpm_uart_init(void) { pr_info("cpm_uart: WARNING: no UART devices found on platform bus!\n"); pr_info( "cpm_uart: the driver will guess configuration, but this mode is no longer supported.\n"); -#ifndef CONFIG_SERIAL_CPM_CONSOLE - ret = cpm_uart_init_portdesc(); - if (ret) - return ret; -#endif + + /* Don't run this again, if the console driver did it already */ + if (cpm_uart_nr == 0) + cpm_uart_init_portdesc(); cpm_reg.nr = cpm_uart_nr; ret = uart_register_driver(&cpm_reg); @@ -1366,6 +1364,8 @@ static int cpm_uart_init(void) { int con = cpm_uart_port_map[i]; cpm_uart_ports[con].port.line = i; cpm_uart_ports[con].port.flags = UPF_BOOT_AUTOCONF; + if (cpm_uart_ports[con].set_lineif) + cpm_uart_ports[con].set_lineif(&cpm_uart_ports[con]); uart_add_one_port(&cpm_reg, &cpm_uart_ports[con].port); } diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c index 95afc37..08e55fd 100644 --- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c +++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c @@ -184,7 +184,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo) } /* Setup any dynamic params in the uart desc */ -int cpm_uart_init_portdesc(void) +int __init cpm_uart_init_portdesc(void) { pr_debug("CPM uart[-]:init portdesc\n"); diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 146298a..c3c0626 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -281,7 +281,6 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n) up(&board_lock); return 0; } -EXPORT_SYMBOL_GPL(spi_register_board_info); /* FIXME someone should add support for a __setup("spi", ...) that * creates board info from kernel command lines diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h index fbea454..8d69bcd 100644 --- a/drivers/telephony/ixj.h +++ b/drivers/telephony/ixj.h @@ -1295,7 +1295,7 @@ typedef struct { Proc_Info_Type Info_write; unsigned short frame_count; unsigned int filter_hist[4]; - unsigned char filter_en[4]; + unsigned char filter_en[6]; unsigned short proc_load; unsigned long framesread; unsigned long frameswritten; diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 809d465..6303970 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -722,6 +722,7 @@ static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t usblp->wcomplete = 0; err = usb_submit_urb(usblp->writeurb, GFP_KERNEL); if (err) { + usblp->wcomplete = 1; if (err != -ENOMEM) count = -EIO; else @@ -1202,8 +1203,6 @@ static int usblp_suspend (struct usb_interface *intf, pm_message_t message) down (&usblp->sem); /* we take no more IO */ usblp->sleeping = 1; - /* we wait for anything printing */ - wait_event (usblp->wait, usblp->wcomplete || !usblp->present); usblp_unlink_urbs(usblp); up (&usblp->sem); mutex_unlock (&usblp_mutex); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 66bff18..ba165af 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1188,6 +1188,7 @@ static inline void show_string(struct usb_device *udev, char *id, char *string) #ifdef CONFIG_USB_OTG #include "otg_whitelist.h" +static int __usb_port_suspend(struct usb_device *, int port1); #endif /** @@ -1289,8 +1290,6 @@ int usb_new_device(struct usb_device *udev) * (Includes HNP test device.) */ if (udev->bus->b_hnp_enable || udev->bus->is_b_host) { - static int __usb_port_suspend(struct usb_device *, - int port1); err = __usb_port_suspend(udev, udev->bus->otg_port); if (err < 0) dev_dbg(&udev->dev, "HNP fail, %d\n", err); diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index 45f44fe..6daf85c 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -270,7 +270,7 @@ static int hid_add_field(struct hid_parser *parser, unsigned report_type, unsign * Read data value from item. */ -static __inline__ __u32 item_udata(struct hid_item *item) +static u32 item_udata(struct hid_item *item) { switch (item->size) { case 1: return item->data.u8; @@ -280,7 +280,7 @@ static __inline__ __u32 item_udata(struct hid_item *item) return 0; } -static __inline__ __s32 item_sdata(struct hid_item *item) +static s32 item_sdata(struct hid_item *item) { switch (item->size) { case 1: return item->data.s8; @@ -727,7 +727,7 @@ static struct hid_device *hid_parse_report(__u8 *start, unsigned size) * done by hand. */ -static __inline__ __s32 snto32(__u32 value, unsigned n) +static s32 snto32(__u32 value, unsigned n) { switch (n) { case 8: return ((__s8)value); @@ -741,9 +741,9 @@ static __inline__ __s32 snto32(__u32 value, unsigned n) * Convert a signed 32-bit integer to a signed n-bit integer. */ -static __inline__ __u32 s32ton(__s32 value, unsigned n) +static u32 s32ton(__s32 value, unsigned n) { - __s32 a = value >> (n - 1); + s32 a = value >> (n - 1); if (a && a != -1) return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1; return value & ((1 << n) - 1); @@ -751,30 +751,55 @@ static __inline__ __u32 s32ton(__s32 value, unsigned n) /* * Extract/implement a data field from/to a little endian report (bit array). + * + * Code sort-of follows HID spec: + * http://www.usb.org/developers/devclass_docs/HID1_11.pdf + * + * While the USB HID spec allows unlimited length bit fields in "report + * descriptors", most devices never use more than 16 bits. + * One model of UPS is claimed to report "LINEV" as a 32-bit field. + * Search linux-kernel and linux-usb-devel archives for "hid-core extract". */ static __inline__ __u32 extract(__u8 *report, unsigned offset, unsigned n) { - u32 x; + u64 x; + + WARN_ON(n > 32); report += offset >> 3; /* adjust byte index */ - offset &= 8 - 1; - x = get_unaligned((u32 *) report); - x = le32_to_cpu(x); - x = (x >> offset) & ((1 << n) - 1); - return x; + offset &= 7; /* now only need bit offset into one byte */ + x = get_unaligned((u64 *) report); + x = le64_to_cpu(x); + x = (x >> offset) & ((1ULL << n) - 1); /* extract bit field */ + return (u32) x; } +/* + * "implement" : set bits in a little endian bit stream. + * Same concepts as "extract" (see comments above). + * The data mangled in the bit stream remains in little endian + * order the whole time. It make more sense to talk about + * endianness of register values by considering a register + * a "cached" copy of the little endiad bit stream. + */ static __inline__ void implement(__u8 *report, unsigned offset, unsigned n, __u32 value) { - u32 x; + u64 x; + u64 m = (1ULL << n) - 1; + + WARN_ON(n > 32); + + WARN_ON(value > m); + value &= m; report += offset >> 3; - offset &= 8 - 1; - x = get_unaligned((u32 *)report); - x &= cpu_to_le32(~((((__u32) 1 << n) - 1) << offset)); - x |= cpu_to_le32(value << offset); - put_unaligned(x,(u32 *)report); + offset &= 7; + + x = get_unaligned((u64 *)report); + x &= cpu_to_le64(~(m << offset)); + x |= cpu_to_le64(((u64) value) << offset); + put_unaligned(x, (u64 *) report); } /* @@ -1615,6 +1640,9 @@ void hid_init_reports(struct hid_device *hid) #define USB_VENDOR_ID_SUN 0x0430 #define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab +#define USB_VENDOR_ID_AIRCABLE 0x16CA +#define USB_DEVICE_ID_AIRCABLE1 0x1502 + /* * Alphabetically sorted blacklist by quirk type. */ @@ -1632,6 +1660,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_22, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_23, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_AIPTEK, USB_DEVICE_ID_AIPTEK_24, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_AIRCABLE, USB_DEVICE_ID_AIRCABLE1, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_ALCOR, USB_DEVICE_ID_ALCOR_USBRS232, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW40, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 2902742..933cedd 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -640,7 +640,7 @@ static int usbtouch_probe(struct usb_interface *intf, type->max_press, 0, 0); usb_fill_int_urb(usbtouch->irq, usbtouch->udev, - usb_rcvintpipe(usbtouch->udev, 0x81), + usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress), usbtouch->data, type->rept_size, usbtouch_irq, usbtouch, endpoint->bInterval); diff --git a/drivers/usb/input/xpad.c b/drivers/usb/input/xpad.c index 6a12a94..df97e5c 100644 --- a/drivers/usb/input/xpad.c +++ b/drivers/usb/input/xpad.c @@ -2,6 +2,10 @@ * X-Box gamepad - v0.0.6 * * Copyright (c) 2002 Marko Friedemann <mfr@bmx-chemnitz.de> + * 2004 Oliver Schwartz <Oliver.Schwartz@gmx.de>, + * Steven Toth <steve@toth.demon.co.uk>, + * Franz Lehner <franz@caos.at>, + * Ivan Hawkes <blackhawk@ivanhawkes.com> * 2005 Dominic Cerquetti <binary1230@yahoo.com> * 2006 Adam Buchbinder <adam.buchbinder@gmail.com> * @@ -29,6 +33,7 @@ * - ITO Takayuki for providing essential xpad information on his website * - Vojtech Pavlik - iforce driver / input subsystem * - Greg Kroah-Hartman - usb-skeleton driver + * - XBOX Linux project - extra USB id's * * TODO: * - fine tune axes (especially trigger axes) @@ -54,6 +59,13 @@ * - fixed d-pad to axes mapping * * 2002-07-17 - 0.0.5 : simplified d-pad handling + * + * 2004-10-02 - 0.0.6 : DDR pad support + * - borrowed from the XBOX linux kernel + * - USB id's for commonly used dance pads are present + * - dance pads will map D-PAD to buttons, not axes + * - pass the module paramater 'dpad_to_buttons' to force + * the D-PAD to map to buttons if your pad is not detected */ #include <linux/kernel.h> @@ -90,8 +102,35 @@ static const struct xpad_device { { 0x045e, 0x0202, "Microsoft X-Box pad v1 (US)", MAP_DPAD_TO_AXES }, { 0x045e, 0x0289, "Microsoft X-Box pad v2 (US)", MAP_DPAD_TO_AXES }, { 0x045e, 0x0285, "Microsoft X-Box pad (Japan)", MAP_DPAD_TO_AXES }, - { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, + { 0x045e, 0x0287, "Microsoft Xbox Controller S", MAP_DPAD_TO_AXES }, { 0x0c12, 0x8809, "RedOctane Xbox Dance Pad", MAP_DPAD_TO_BUTTONS }, + { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", MAP_DPAD_TO_AXES }, + { 0x046d, 0xca84, "Logitech Xbox Cordless Controller", MAP_DPAD_TO_AXES }, + { 0x046d, 0xca88, "Logitech Compact Controller for Xbox", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x1007, "Mad Catz Controller (unverified)", MAP_DPAD_TO_AXES }, + { 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4516, "Mad Catz Control Pad", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4522, "Mad Catz LumiCON", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4526, "Mad Catz Control Pad Pro", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4536, "Mad Catz MicroCON", MAP_DPAD_TO_AXES }, + { 0x0738, 0x4540, "Mad Catz Beat Pad", MAP_DPAD_TO_BUTTONS }, + { 0x0738, 0x4556, "Mad Catz Lynx Wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS }, + { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES }, + { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES }, + { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES }, + { 0x0e4c, 0x2390, "Radica Games Jtech Controller", MAP_DPAD_TO_AXES}, + { 0x0e6f, 0x0003, "Logic3 Freebird wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e6f, 0x0005, "Eclipse wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e6f, 0x0006, "Edge wireless Controller", MAP_DPAD_TO_AXES }, + { 0x0e8f, 0x0201, "SmartJoy Frag Xpad/PS2 adaptor", MAP_DPAD_TO_AXES }, + { 0x0f30, 0x0202, "Joytech Advanced Controller", MAP_DPAD_TO_AXES }, + { 0x0f30, 0x8888, "BigBen XBMiniPad Controller", MAP_DPAD_TO_AXES }, + { 0x102c, 0xff0c, "Joytech Wireless Advanced Controller", MAP_DPAD_TO_AXES }, + { 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS }, + { 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS }, + { 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES }, { 0x0000, 0x0000, "Generic X-Box pad", MAP_DPAD_UNKNOWN } }; diff --git a/drivers/usb/net/Kconfig b/drivers/usb/net/Kconfig index 454a186..e081836 100644 --- a/drivers/usb/net/Kconfig +++ b/drivers/usb/net/Kconfig @@ -92,8 +92,13 @@ config USB_RTL8150 To compile this driver as a module, choose M here: the module will be called rtl8150. +config USB_USBNET_MII + tristate + default n + config USB_USBNET tristate "Multi-purpose USB Networking Framework" + select MII if USBNET_MII != n ---help--- This driver supports several kinds of network links over USB, with "minidrivers" built around a common network driver core @@ -129,7 +134,7 @@ config USB_NET_AX8817X tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters" depends on USB_USBNET && NET_ETHERNET select CRC32 - select MII + select USB_USBNET_MII default y help This option adds support for ASIX AX88xxx based USB 2.0 @@ -210,6 +215,7 @@ config USB_NET_PLUSB config USB_NET_MCS7830 tristate "MosChip MCS7830 based Ethernet adapters" depends on USB_USBNET + select USB_USBNET_MII help Choose this option if you're using a 10/100 Ethernet USB2 adapter based on the MosChip 7830 controller. This includes diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c index 4087363..760b532 100644 --- a/drivers/usb/net/usbnet.c +++ b/drivers/usb/net/usbnet.c @@ -669,6 +669,9 @@ done: * they'll probably want to use this base set. */ +#if defined(CONFIG_MII) || defined(CONFIG_MII_MODULE) +#define HAVE_MII + int usbnet_get_settings (struct net_device *net, struct ethtool_cmd *cmd) { struct usbnet *dev = netdev_priv(net); @@ -699,20 +702,6 @@ int usbnet_set_settings (struct net_device *net, struct ethtool_cmd *cmd) } EXPORT_SYMBOL_GPL(usbnet_set_settings); - -void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) -{ - struct usbnet *dev = netdev_priv(net); - - /* REVISIT don't always return "usbnet" */ - strncpy (info->driver, driver_name, sizeof info->driver); - strncpy (info->version, DRIVER_VERSION, sizeof info->version); - strncpy (info->fw_version, dev->driver_info->description, - sizeof info->fw_version); - usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); -} -EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); - u32 usbnet_get_link (struct net_device *net) { struct usbnet *dev = netdev_priv(net); @@ -730,40 +719,57 @@ u32 usbnet_get_link (struct net_device *net) } EXPORT_SYMBOL_GPL(usbnet_get_link); -u32 usbnet_get_msglevel (struct net_device *net) +int usbnet_nway_reset(struct net_device *net) { struct usbnet *dev = netdev_priv(net); - return dev->msg_enable; + if (!dev->mii.mdio_write) + return -EOPNOTSUPP; + + return mii_nway_restart(&dev->mii); } -EXPORT_SYMBOL_GPL(usbnet_get_msglevel); +EXPORT_SYMBOL_GPL(usbnet_nway_reset); -void usbnet_set_msglevel (struct net_device *net, u32 level) +#endif /* HAVE_MII */ + +void usbnet_get_drvinfo (struct net_device *net, struct ethtool_drvinfo *info) { struct usbnet *dev = netdev_priv(net); - dev->msg_enable = level; + /* REVISIT don't always return "usbnet" */ + strncpy (info->driver, driver_name, sizeof info->driver); + strncpy (info->version, DRIVER_VERSION, sizeof info->version); + strncpy (info->fw_version, dev->driver_info->description, + sizeof info->fw_version); + usb_make_path (dev->udev, info->bus_info, sizeof info->bus_info); } -EXPORT_SYMBOL_GPL(usbnet_set_msglevel); +EXPORT_SYMBOL_GPL(usbnet_get_drvinfo); -int usbnet_nway_reset(struct net_device *net) +u32 usbnet_get_msglevel (struct net_device *net) { struct usbnet *dev = netdev_priv(net); - if (!dev->mii.mdio_write) - return -EOPNOTSUPP; + return dev->msg_enable; +} +EXPORT_SYMBOL_GPL(usbnet_get_msglevel); - return mii_nway_restart(&dev->mii); +void usbnet_set_msglevel (struct net_device *net, u32 level) +{ + struct usbnet *dev = netdev_priv(net); + + dev->msg_enable = level; } -EXPORT_SYMBOL_GPL(usbnet_nway_reset); +EXPORT_SYMBOL_GPL(usbnet_set_msglevel); /* drivers may override default ethtool_ops in their bind() routine */ static struct ethtool_ops usbnet_ethtool_ops = { +#ifdef HAVE_MII .get_settings = usbnet_get_settings, .set_settings = usbnet_set_settings, - .get_drvinfo = usbnet_get_drvinfo, .get_link = usbnet_get_link, .nway_reset = usbnet_nway_reset, +#endif + .get_drvinfo = usbnet_get_drvinfo, .get_msglevel = usbnet_get_msglevel, .set_msglevel = usbnet_set_msglevel, }; diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 9a6ec1b..2a8dd4c 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -54,10 +54,10 @@ config USB_SERIAL_GENERIC properly. config USB_SERIAL_AIRCABLE - tristate "AIRcable USB Bluetooth Dongle Driver (EXPERIMENTAL)" + tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)" depends on USB_SERIAL && EXPERIMENTAL help - Say Y here if you want to use AIRcable USB Bluetoot Dongle. + Say Y here if you want to use USB AIRcable Bluetooth Dongle. To compile this driver as a module, choose M here: the module will be called aircable. diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index bbf6532..f95d42c 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -64,6 +64,9 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ea16572..4b5097f 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -35,6 +35,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */ @@ -58,8 +59,10 @@ static struct usb_device_id id_table_3port [] = { { USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */ { USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */ + { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */ { USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */ { USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */ + { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */ { USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */ { USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */ { } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 37ed8e0..bc1ac07 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1236,7 +1236,7 @@ UNUSUAL_DEV( 0x0e21, 0x0520, 0x0100, 0x0100, "Cowon Systems", "iAUDIO M5", US_SC_DEVICE, US_PR_BULK, NULL, - 0 ), + US_FL_NEED_OVERRIDE ), /* Submitted by Antoine Mairesse <antoine.mairesse@free.fr> */ UNUSUAL_DEV( 0x0ed1, 0x6660, 0x0100, 0x0300, @@ -1313,6 +1313,13 @@ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Jan Mate <mate@fiit.stuba.sk> */ +UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, + "Sony Ericsson", + "P990i", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY ), + /* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu> * Tested on hardware version 1.10. * Entry is needed only for the initializer function override. diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c index 9ed640d..ea42611 100644 --- a/drivers/video/nvidia/nv_hw.c +++ b/drivers/video/nvidia/nv_hw.c @@ -145,12 +145,18 @@ static void nvGetClocks(struct nvidia_par *par, unsigned int *MClk, if (par->Architecture >= NV_ARCH_40) { pll = NV_RD32(par->PMC, 0x4020); - P = (pll >> 16) & 0x03; + P = (pll >> 16) & 0x07; pll = NV_RD32(par->PMC, 0x4024); M = pll & 0xFF; N = (pll >> 8) & 0xFF; - MB = (pll >> 16) & 0xFF; - NB = (pll >> 24) & 0xFF; + if (((par->Chipset & 0xfff0) == 0x0290) || + ((par->Chipset & 0xfff0) == 0x0390)) { + MB = 1; + NB = 1; + } else { + MB = (pll >> 16) & 0xFF; + NB = (pll >> 24) & 0xFF; + } *MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P; pll = NV_RD32(par->PMC, 0x4000); diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/nvidia/nv_setup.c index a18a9ae..61dc46f 100644 --- a/drivers/video/nvidia/nv_setup.c +++ b/drivers/video/nvidia/nv_setup.c @@ -359,6 +359,7 @@ int NVCommonSetup(struct fb_info *info) case 0x0186: case 0x0187: case 0x018D: + case 0x0228: case 0x0286: case 0x028C: case 0x0316: @@ -382,6 +383,10 @@ int NVCommonSetup(struct fb_info *info) case 0x034C: case 0x0160: case 0x0166: + case 0x0169: + case 0x016B: + case 0x016C: + case 0x016D: case 0x00C8: case 0x00CC: case 0x0144: @@ -639,12 +644,23 @@ int NVCommonSetup(struct fb_info *info) par->fpHeight = NV_RD32(par->PRAMDAC, 0x0800) + 1; par->fpSyncs = NV_RD32(par->PRAMDAC, 0x0848) & 0x30000033; - printk("Panel size is %i x %i\n", par->fpWidth, par->fpHeight); + printk("nvidiafb: Panel size is %i x %i\n", par->fpWidth, par->fpHeight); } if (monA) info->monspecs = *monA; + if (!par->FlatPanel || !par->twoHeads) + par->FPDither = 0; + + par->LVDS = 0; + if (par->FlatPanel && par->twoHeads) { + NV_WR32(par->PRAMDAC0, 0x08B0, 0x00010004); + if (par->PRAMDAC0[0x08b4] & 1) + par->LVDS = 1; + printk("nvidiafb: Panel is %s\n", par->LVDS ? "LVDS" : "TMDS"); + } + kfree(edidA); kfree(edidB); done: diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/nvidia/nv_type.h index acdc266..86e65de 100644 --- a/drivers/video/nvidia/nv_type.h +++ b/drivers/video/nvidia/nv_type.h @@ -129,6 +129,7 @@ struct nvidia_par { int fpHeight; int PanelTweak; int paneltweak; + int LVDS; int pm_state; u32 crtcSync_read; u32 fpSyncs; diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/nvidia/nvidia.c index eb24107..538e947 100644 --- a/drivers/video/nvidia/nvidia.c +++ b/drivers/video/nvidia/nvidia.c @@ -1160,20 +1160,20 @@ static u32 __devinit nvidia_get_arch(struct fb_info *info) case 0x0340: /* GeForceFX 5700 */ arch = NV_ARCH_30; break; - case 0x0040: - case 0x00C0: - case 0x0120: + case 0x0040: /* GeForce 6800 */ + case 0x00C0: /* GeForce 6800 */ + case 0x0120: /* GeForce 6800 */ case 0x0130: - case 0x0140: - case 0x0160: - case 0x01D0: - case 0x0090: - case 0x0210: - case 0x0220: + case 0x0140: /* GeForce 6600 */ + case 0x0160: /* GeForce 6200 */ + case 0x01D0: /* GeForce 7200, 7300, 7400 */ + case 0x0090: /* GeForce 7800 */ + case 0x0210: /* GeForce 6800 */ + case 0x0220: /* GeForce 6200 */ case 0x0230: - case 0x0240: - case 0x0290: - case 0x0390: + case 0x0240: /* GeForce 6100 */ + case 0x0290: /* GeForce 7900 */ + case 0x0390: /* GeForce 7600 */ arch = NV_ARCH_40; break; case 0x0020: /* TNT, TNT2 */ |