diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/scsi/libata-scsi.c | 644 | ||||
-rw-r--r-- | drivers/scsi/libata.h | 3 |
2 files changed, 556 insertions, 91 deletions
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 5885888..b761bd1 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -40,10 +40,13 @@ #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> +#include <linux/hdreg.h> #include <asm/uaccess.h> #include "libata.h" +#define SECTOR_SIZE 512 + typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev); @@ -86,6 +89,150 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, return 0; } +/** + * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl + * @dev: Device to whom we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ + +int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[4], *argbuf = NULL; + int argsize = 0; + struct scsi_request *sreq; + + if (NULL == (void *)arg) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + sreq = scsi_allocate_request(scsidev, GFP_KERNEL); + if (!sreq) + return -EINTR; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + + if (args[3]) { + argsize = SECTOR_SIZE * args[3]; + argbuf = kmalloc(argsize, GFP_KERNEL); + if (argbuf == NULL) { + rc = -ENOMEM; + goto error; + } + + scsi_cmd[1] = (4 << 1); /* PIO Data-in */ + scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, + block count in sector count field */ + sreq->sr_data_direction = DMA_FROM_DEVICE; + } else { + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + sreq->sr_data_direction = DMA_NONE; + } + + scsi_cmd[0] = ATA_16; + + scsi_cmd[4] = args[2]; + if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ + scsi_cmd[6] = args[3]; + scsi_cmd[8] = args[1]; + scsi_cmd[10] = 0x4f; + scsi_cmd[12] = 0xc2; + } else { + scsi_cmd[6] = args[1]; + } + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + scsi_wait_req(sreq, scsi_cmd, argbuf, argsize, (10*HZ), 5); + + if (sreq->sr_result) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + + if ((argbuf) + && copy_to_user((void *)(arg + sizeof(args)), argbuf, argsize)) + rc = -EFAULT; +error: + scsi_release_request(sreq); + + if (argbuf) + kfree(argbuf); + + return rc; +} + +/** + * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl + * @dev: Device to whom we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[7]; + struct scsi_request *sreq; + + if (NULL == (void *)arg) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + scsi_cmd[0] = ATA_16; + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + scsi_cmd[4] = args[1]; + scsi_cmd[6] = args[2]; + scsi_cmd[8] = args[3]; + scsi_cmd[10] = args[4]; + scsi_cmd[12] = args[5]; + scsi_cmd[14] = args[0]; + + sreq = scsi_allocate_request(scsidev, GFP_KERNEL); + if (!sreq) { + rc = -EINTR; + goto error; + } + + sreq->sr_data_direction = DMA_NONE; + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + scsi_wait_req(sreq, scsi_cmd, NULL, 0, (10*HZ), 5); + + if (sreq->sr_result) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + +error: + scsi_release_request(sreq); + return rc; +} + int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) { struct ata_port *ap; @@ -115,6 +262,16 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) return -EINVAL; return 0; + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_cmd_ioctl(scsidev, arg); + + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_task_ioctl(scsidev, arg); + default: rc = -ENOTTY; break; @@ -173,23 +330,70 @@ struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, } /** + * ata_dump_status - user friendly display of error info + * @id: id of the port in question + * @tf: ptr to filled out taskfile + * + * Decode and dump the ATA error/status registers for the user so + * that they have some idea what really happened at the non + * make-believe layer. + * + * LOCKING: + * inherited from caller + */ +void ata_dump_status(unsigned id, struct ata_taskfile *tf) +{ + u8 stat = tf->command, err = tf->feature; + + printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); + if (stat & ATA_BUSY) { + printk("Busy }\n"); /* Data is not valid in this case */ + } else { + if (stat & 0x40) printk("DriveReady "); + if (stat & 0x20) printk("DeviceFault "); + if (stat & 0x10) printk("SeekComplete "); + if (stat & 0x08) printk("DataRequest "); + if (stat & 0x04) printk("CorrectedError "); + if (stat & 0x02) printk("Index "); + if (stat & 0x01) printk("Error "); + printk("}\n"); + + if (err) { + printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); + if (err & 0x04) printk("DriveStatusError "); + if (err & 0x80) { + if (err & 0x04) printk("BadCRC "); + else printk("Sector "); + } + if (err & 0x40) printk("UncorrectableError "); + if (err & 0x10) printk("SectorIdNotFound "); + if (err & 0x02) printk("TrackZeroNotFound "); + if (err & 0x01) printk("AddrMarkNotFound "); + printk("}\n"); + } + } +} + +/** * ata_to_sense_error - convert ATA error to SCSI error - * @qc: Command that we are erroring out * @drv_stat: value contained in ATA status register + * @drv_err: value contained in ATA error register + * @sk: the sense key we'll fill out + * @asc: the additional sense code we'll fill out + * @ascq: the additional sense code qualifier we'll fill out * - * Converts an ATA error into a SCSI error. While we are at it - * we decode and dump the ATA error for the user so that they - * have some idea what really happened at the non make-believe - * layer. + * Converts an ATA error into a SCSI error. Fill out pointers to + * SK, ASC, and ASCQ bytes for later use in fixed or descriptor + * format sense blocks. * * LOCKING: * spin_lock_irqsave(host_set lock) */ - -void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) +void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, + u8 *ascq) { - struct scsi_cmnd *cmd = qc->scsicmd; - u8 err = 0; + int i; + /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -230,96 +434,184 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; - int i = 0; /* * Is this an error we can process/parse */ - - if(drv_stat & ATA_ERR) - /* Read the err bits */ - err = ata_chk_err(qc->ap); - - /* Display the ATA level error info */ - - printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat); - if(drv_stat & 0x80) - { - printk("Busy "); - err = 0; /* Data is not valid in this case */ + if (drv_stat & ATA_BUSY) { + drv_err = 0; /* Ignore the err bits, they're invalid */ } - else { - if(drv_stat & 0x40) printk("DriveReady "); - if(drv_stat & 0x20) printk("DeviceFault "); - if(drv_stat & 0x10) printk("SeekComplete "); - if(drv_stat & 0x08) printk("DataRequest "); - if(drv_stat & 0x04) printk("CorrectedError "); - if(drv_stat & 0x02) printk("Index "); - if(drv_stat & 0x01) printk("Error "); + + if (drv_err) { + /* Look for drv_err */ + for (i = 0; sense_table[i][0] != 0xFF; i++) { + /* Look for best matches first */ + if ((sense_table[i][0] & drv_err) == + sense_table[i][0]) { + *sk = sense_table[i][1]; + *asc = sense_table[i][2]; + *ascq = sense_table[i][3]; + goto translate_done; + } + } + /* No immediate match */ + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); } - printk("}\n"); - - if(err) - { - printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err); - if(err & 0x04) printk("DriveStatusError "); - if(err & 0x80) - { - if(err & 0x04) - printk("BadCRC "); - else - printk("Sector "); + + /* Fall back to interpreting status bits */ + for (i = 0; stat_table[i][0] != 0xFF; i++) { + if (stat_table[i][0] & drv_stat) { + *sk = stat_table[i][1]; + *asc = stat_table[i][2]; + *ascq = stat_table[i][3]; + goto translate_done; } - if(err & 0x40) printk("UncorrectableError "); - if(err & 0x10) printk("SectorIdNotFound "); - if(err & 0x02) printk("TrackZeroNotFound "); - if(err & 0x01) printk("AddrMarkNotFound "); - printk("}\n"); + } + /* No error? Undecoded? */ + printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n", + id, drv_stat); + + /* For our last chance pick, use medium read error because + * it's much more common than an ATA drive telling you a write + * has failed. + */ + *sk = MEDIUM_ERROR; + *asc = 0x11; /* "unrecovered read error" */ + *ascq = 0x04; /* "auto-reallocation failed" */ + + translate_done: + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to " + "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err, + *sk, *asc, *ascq); + return; +} + +/* + * ata_gen_ata_desc_sense - Generate check condition sense block. + * @qc: Command that completed. + * + * This function is specific to the ATA descriptor format sense + * block specified for the ATA pass through commands. Regardless + * of whether the command errored or not, return a sense + * block. Copy all controller registers into the sense + * block. Clear sense key, ASC & ASCQ if there is no error. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); - /* Should we dump sector info here too ?? */ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Read the controller registers. + */ + assert(NULL != qc->ap->ops->tf_read); + qc->ap->ops->tf_read(qc->ap, tf); + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3]); + sb[1] &= 0x0f; } + /* + * Sense data is current and format is descriptor. + */ + sb[0] = 0x72; - /* Look for err */ - while(sense_table[i][0] != 0xFF) - { - /* Look for best matches first */ - if((sense_table[i][0] & err) == sense_table[i][0]) - { - ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, - sense_table[i][2] /* asc */, - sense_table[i][3] /* ascq */ ); - return; - } - i++; + desc[0] = 0x09; + + /* + * Set length of additional sense data. + * Since we only populate descriptor 0, the total + * length is the same (fixed) length as descriptor 0. + */ + desc[1] = sb[7] = 14; + + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->feature; /* == error reg */ + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->command; /* == status reg */ + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; } - /* No immediate match */ - if(err) - printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err); +} - i = 0; - /* Fall back to interpreting status bits */ - while(stat_table[i][0] != 0xFF) - { - if(stat_table[i][0] & drv_stat) - { - ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, - sense_table[i][2] /* asc */, - sense_table[i][3] /* ascq */ ); - return; - } - i++; +/** + * ata_gen_fixed_sense - generate a SCSI fixed sense block + * @qc: Command that we are erroring out + * + * Leverage ata_to_sense_error() to give us the codes. Fit our + * LBA in here if there's room. + * + * LOCKING: + * inherited from caller + */ +void ata_gen_fixed_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->tf; + unsigned char *sb = cmd->sense_buffer; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Read the controller registers. + */ + assert(NULL != qc->ap->ops->tf_read); + qc->ap->ops->tf_read(qc->ap, tf); + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (unlikely(tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ))) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[2], &sb[12], &sb[13]); + sb[2] &= 0x0f; } - /* No error ?? */ - printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); - /* additional-sense-code[-qualifier] */ - if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4); - /* "unrecovered read error" */ - } else { - ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2); - /* "write error - auto-reallocation failed" */ + sb[0] = 0x70; + sb[7] = 0x0a; + + if (tf->flags & ATA_TFLAG_LBA && !(tf->flags & ATA_TFLAG_LBA48)) { + /* A small (28b) LBA will fit in the 32b info field */ + sb[0] |= 0x80; /* set valid bit */ + sb[3] = tf->device & 0x0f; + sb[4] = tf->lbah; + sb[5] = tf->lbam; + sb[6] = tf->lbal; } } @@ -871,11 +1163,36 @@ nothing_to_do: static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; + int need_sense = drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ); + + /* For ATA pass thru (SAT) commands, generate a sense block if + * user mandated it or if there's an error. Note that if we + * generate because the user forced us to, a check condition + * is generated and the ATA register values are returned + * whether the command completed successfully or not. If there + * was no error, SK, ASC and ASCQ will all be zero. + */ + if (((cmd->cmnd[0] == ATA_16) || (cmd->cmnd[0] == ATA_12)) && + ((cmd->cmnd[2] & 0x20) || need_sense)) { + ata_gen_ata_desc_sense(qc); + } else { + if (!need_sense) { + cmd->result = SAM_STAT_GOOD; + } else { + /* TODO: decide which descriptor format to use + * for 48b LBA devices and call that here + * instead of the fixed desc, which is only + * good for smaller LBA (and maybe CHS?) + * devices. + */ + ata_gen_fixed_sense(qc); + } + } - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) - ata_to_sense_error(qc, drv_stat); - else - cmd->result = SAM_STAT_GOOD; + if (need_sense) { + /* The ata_gen_..._sense routines fill in tf */ + ata_dump_status(qc->ap->id, &qc->tf); + } qc->scsidone(cmd); @@ -1623,7 +1940,12 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) - ata_to_sense_error(qc, drv_stat); + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); @@ -1782,6 +2104,143 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) return dev; } +/* + * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. + * @byte1: Byte 1 from pass-thru CDB. + * + * RETURNS: + * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. + */ +static u8 +ata_scsi_map_proto(u8 byte1) +{ + switch((byte1 & 0x1e) >> 1) { + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + if (byte1 & 0xe0) { + return ATA_PROT_PIO_MULT; + } + return ATA_PROT_PIO; + + case 10: /* Device Reset */ + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 2: /* Bus Idle */ + case 7: /* Packet */ + case 8: /* DMA Queued */ + case 9: /* Device Diagnostic */ + case 11: /* UDMA Data-in */ + case 12: /* UDMA Data-Out */ + case 13: /* FPDMA */ + default: /* Reserved */ + break; + } + + return ATA_PROT_UNKNOWN; +} + +/** + * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile + * @qc: command structure to be initialized + * @cmd: SCSI command to convert + * + * Handles either 12 or 16-byte versions of the CDB. + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int +ata_scsi_pass_thru(struct ata_queued_cmd *qc, u8 *scsicmd) +{ + struct ata_taskfile *tf = &(qc->tf); + struct scsi_cmnd *cmd = qc->scsicmd; + + if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + return 1; + + /* + * 12 and 16 byte CDBs use different offsets to + * provide the various register values. + */ + if (scsicmd[0] == ATA_16) { + /* + * 16-byte CDB - may contain extended commands. + * + * If that is the case, copy the upper byte register values. + */ + if (scsicmd[1] & 0x01) { + tf->hob_feature = scsicmd[3]; + tf->hob_nsect = scsicmd[5]; + tf->hob_lbal = scsicmd[7]; + tf->hob_lbam = scsicmd[9]; + tf->hob_lbah = scsicmd[11]; + tf->flags |= ATA_TFLAG_LBA48; + } else + tf->flags &= ~ATA_TFLAG_LBA48; + + /* + * Always copy low byte, device and command registers. + */ + tf->feature = scsicmd[4]; + tf->nsect = scsicmd[6]; + tf->lbal = scsicmd[8]; + tf->lbam = scsicmd[10]; + tf->lbah = scsicmd[12]; + tf->device = scsicmd[13]; + tf->command = scsicmd[14]; + } else { + /* + * 12-byte CDB - incapable of extended commands. + */ + tf->flags &= ~ATA_TFLAG_LBA48; + + tf->feature = scsicmd[3]; + tf->nsect = scsicmd[4]; + tf->lbal = scsicmd[5]; + tf->lbam = scsicmd[6]; + tf->lbah = scsicmd[7]; + tf->device = scsicmd[8]; + tf->command = scsicmd[9]; + } + + /* + * Filter SET_FEATURES - XFER MODE command -- otherwise, + * SET_FEATURES - XFER MODE must be preceded/succeeded + * by an update to hardware-specific registers for each + * controller (i.e. the reason for ->set_piomode(), + * ->set_dmamode(), and ->post_set_mode() hooks). + */ + if ((tf->command == ATA_CMD_SET_FEATURES) + && (tf->feature == SETFEATURES_XFER)) + return 1; + + /* + * Set flags so that all registers will be written, + * and pass on write indication (used for PIO/DMA + * setup.) + */ + tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + tf->flags |= ATA_TFLAG_WRITE; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + qc->nsect = cmd->bufflen / ATA_SECT_SIZE; + + return 0; +} + /** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device @@ -1814,6 +2273,11 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) case VERIFY: case VERIFY_16: return ata_scsi_verify_xlat; + + case ATA_12: + case ATA_16: + return ata_scsi_pass_thru; + case START_STOP: return ata_scsi_start_stop_xlat; } @@ -1972,7 +2436,7 @@ void ata_scsi_simulate(u16 *id, ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); break; - /* mandantory commands we haven't implemented yet */ + /* mandatory commands we haven't implemented yet */ case REQUEST_SENSE: /* all other commands */ diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 3d60190..65c264b 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -50,13 +50,14 @@ extern void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep); extern void ata_tf_to_host_nolock(struct ata_port *ap, const struct ata_taskfile *tf); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); +extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg); +extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg); /* libata-scsi.c */ extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, struct scsi_cmnd *cmd); extern void ata_scsi_scan_host(struct ata_port *ap); -extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen); |