diff options
Diffstat (limited to 'include/asm-avr32/bitops.h')
| -rw-r--r-- | include/asm-avr32/bitops.h | 301 |
1 files changed, 0 insertions, 301 deletions
diff --git a/include/asm-avr32/bitops.h b/include/asm-avr32/bitops.h deleted file mode 100644 index 1a50b69..0000000 --- a/include/asm-avr32/bitops.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_AVR32_BITOPS_H -#define __ASM_AVR32_BITOPS_H - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#include <asm/byteorder.h> -#include <asm/system.h> - -/* - * clear_bit() doesn't provide any barrier for the compiler - */ -#define smp_mb__before_clear_bit() barrier() -#define smp_mb__after_clear_bit() barrier() - -/* - * set_bit - Atomically set a bit in memory - * @nr: the bit to set - * @addr: the address to start counting from - * - * This function is atomic and may not be reordered. See __set_bit() - * if you do not require the atomic guarantees. - * - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void set_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long tmp; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " sbr %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "i"(nr) - : "cc"); - } else { - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " or %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "r"(mask) - : "cc"); - } -} - -/* - * clear_bit - Clears a bit in memory - * @nr: Bit to clear - * @addr: Address to start counting from - * - * clear_bit() is atomic and may not be reordered. However, it does - * not contain a memory barrier, so if it is used for locking purposes, - * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() - * in order to ensure changes are visible on other processors. - */ -static inline void clear_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long tmp; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " cbr %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "i"(nr) - : "cc"); - } else { - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " andn %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "r"(mask) - : "cc"); - } -} - -/* - * change_bit - Toggle a bit in memory - * @nr: Bit to change - * @addr: Address to start counting from - * - * change_bit() is atomic and may not be reordered. - * Note that @nr may be almost arbitrarily large; this function is not - * restricted to acting on a single-word quantity. - */ -static inline void change_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp; - - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %2\n" - " eor %0, %3\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p) - : "m"(*p), "r"(mask) - : "cc"); -} - -/* - * test_and_set_bit - Set a bit and return its old value - * @nr: Bit to set - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_set_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp, old; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %3\n" - " mov %2, %0\n" - " sbr %0, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "i"(nr) - : "memory", "cc"); - } else { - asm volatile( - "1: ssrf 5\n" - " ld.w %2, %3\n" - " or %0, %2, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "r"(mask) - : "memory", "cc"); - } - - return (old & mask) != 0; -} - -/* - * test_and_clear_bit - Clear a bit and return its old value - * @nr: Bit to clear - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_clear_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp, old; - - if (__builtin_constant_p(nr)) { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %3\n" - " mov %2, %0\n" - " cbr %0, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "i"(nr) - : "memory", "cc"); - } else { - asm volatile( - "1: ssrf 5\n" - " ld.w %0, %3\n" - " mov %2, %0\n" - " andn %0, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "r"(mask) - : "memory", "cc"); - } - - return (old & mask) != 0; -} - -/* - * test_and_change_bit - Change a bit and return its old value - * @nr: Bit to change - * @addr: Address to count from - * - * This operation is atomic and cannot be reordered. - * It also implies a memory barrier. - */ -static inline int test_and_change_bit(int nr, volatile void * addr) -{ - unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG; - unsigned long mask = 1UL << (nr % BITS_PER_LONG); - unsigned long tmp, old; - - asm volatile( - "1: ssrf 5\n" - " ld.w %2, %3\n" - " eor %0, %2, %4\n" - " stcond %1, %0\n" - " brne 1b" - : "=&r"(tmp), "=o"(*p), "=&r"(old) - : "m"(*p), "r"(mask) - : "memory", "cc"); - - return (old & mask) != 0; -} - -#include <asm-generic/bitops/non-atomic.h> - -/* Find First bit Set */ -static inline unsigned long __ffs(unsigned long word) -{ - unsigned long result; - - asm("brev %1\n\t" - "clz %0,%1" - : "=r"(result), "=&r"(word) - : "1"(word)); - return result; -} - -/* Find First Zero */ -static inline unsigned long ffz(unsigned long word) -{ - return __ffs(~word); -} - -/* Find Last bit Set */ -static inline int fls(unsigned long word) -{ - unsigned long result; - - asm("clz %0,%1" : "=r"(result) : "r"(word)); - return 32 - result; -} - -unsigned long find_first_zero_bit(const unsigned long *addr, - unsigned long size); -unsigned long find_next_zero_bit(const unsigned long *addr, - unsigned long size, - unsigned long offset); -unsigned long find_first_bit(const unsigned long *addr, - unsigned long size); -unsigned long find_next_bit(const unsigned long *addr, - unsigned long size, - unsigned long offset); - -/* - * ffs: find first bit set. This is defined the same way as - * the libc and compiler builtin ffs routines, therefore - * differs in spirit from the above ffz (man ffs). - * - * The difference is that bit numbering starts at 1, and if no bit is set, - * the function returns 0. - */ -static inline int ffs(unsigned long word) -{ - if(word == 0) - return 0; - return __ffs(word) + 1; -} - -#include <asm-generic/bitops/fls64.h> -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> - -#include <asm-generic/bitops/ext2-non-atomic.h> -#include <asm-generic/bitops/ext2-atomic.h> -#include <asm-generic/bitops/minix-le.h> - -#endif /* __ASM_AVR32_BITOPS_H */ |