aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
Commit message (Collapse)AuthorAgeFilesLines
* arm: omap4: panda: remove usb_nop_xceiv_register(v1)Ming Lei2011-02-021-2/+0
| | | | | | | | | | | | Panda uses both twl6030 otg phy(vbus, id) and internal phy(data lines, DP/DM), so removes usb_nop_xceiv_register to make twl6030 otg driver working since current otg code only supports one global transceiver. Otherwise, musb doesn't work without the remove. Reviewd-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* OMAP3: Devkit8000: Change lcd power pinThomas Weber2011-02-011-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a wrongly used lcd enable pin. The Devkit8000 uses twl4030_ledA configured as output gpio only for the lcd enable line. twl4030_gpio.1 is used through the generic gpio functions while ledA is used via low level twl4030 calls. This patch removes the low level calls and use the generic gpio functions for initialization and use of ledA. This patch also fixes a bug where the lcd would not power down when blanking. Further this patch fixes an indentation issue. The comment line uses eight whitespace and is replaced with a hard tab. gpio_request + gpio_direction_output are replaced with gpio_request_one. The return value of gpio_request_one is used to set the value of the gpio to -EINVAL when unsuccessful, so that gpio_is_valid can detect the unsuccessful request. But already successful requested gpios are not freed. Reported-by: Daniel Morsing <daniel.morsing@gmail.com> Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: mach-omap2: mux: free allocated memory on error exitAaro Koskinen2011-02-011-0/+1
| | | | | | | Free allocated memory on error exit. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraintsAaro Koskinen2011-02-011-3/+0
| | | | | | | | | | | | | With the commit 757902513019e6ee469791ff76f954b19ca8d036 (regulator: Factor out voltage set operation into a separate function) fixed voltage regulator setup will fail if there are voltage constraints defined. This made MMC unusable on this board. Fix by just deleting those redundant constraints. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Reviewed-by: Jarkko Nikula <jhnikula@gmail.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'for_2.6.38/pm-fixes' of ↵Tony Lindgren2011-01-313-9/+10
|\ | | | | | | ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-fixes
| * OMAP: PM: SmartReflex: Fix possible null pointer read accessStefan Weil2011-01-311-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These errors were found by cppcheck: arch/arm/mach-omap2/smartreflex.c:784: error: Possible null pointer dereference: sr_info arch/arm/mach-omap2/smartreflex.c:799: error: Possible null pointer dereference: sr_info Both conditional statements are executed when sr_info == NULL, so accessing sr_info->voltdm would fail. Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP: PM: SmartReflex: Fix possible memory leakStefan Weil2011-01-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sr_info was allocated and needs a kfree before returning. This error was reported by cppcheck: arch/arm/mach-omap2/smartreflex.c:837: error: Memory leak: sr_info To: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Acked-by: Shweta Gulati <shweta.gulati@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * arm: mach-omap2: voltage: debugfs: fix memory leakAaro Koskinen2011-01-311-0/+1
| | | | | | | | | | | | | | | | The temporary string holding the directory name to be created should be released. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP3: PM: fix save secure RAM to restore MPU power stateKevin Hilman2011-01-261-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, on HS/EMU devices, MPU power state forced to on during PM init by the save secure RAM code. Rather than forcing the state of MPU powerdomain to on, simply read the current value and restore it after the ROM code has run. This only affects the !CPUidle case since when CPUidle is enabled, the MPU power state is dynamically changed by CPUidle. In the !CPUidle case, MPU power state is initialized once at init and never touched. Acked-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * OMAP: PM: SmartReflex: Add missing IS_ERR testJulia Lawall2011-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function _sr_lookup, defined in the same file, returns ERR_PTR not NULL in an error case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERRJulia Lawall2011-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This code elsewhere returns a negative constant to an indicate an error, while IS_ERR returns the result of a >= operation. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ if (...) { ... - return IS_ERR(x); + return PTR_ERR(x); } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: omap2: mux: fix compile warningFelipe Balbi2011-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8419fdbaf2118a0a169441be82f09f7be93a5ca1 (omap2+: Add omap_mux_get_by_name) introduced the following compile warning: arch/arm/mach-omap2/mux.c: In function '_omap_mux_get_by_name': arch/arm/mach-omap2/mux.c:163:17: warning: 'found_mode' may be used uninitialized in this function Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | omap2+: Fix unused variable warning for omap_irq_baseRussell King2011-01-272-18/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 5d190c40100793a6dfc37bf325677c10f3c80edf (omap2+: Initialize omap_irq_base for entry-macro.S from platform code) simplified the handling of omap_irq_base for multi-omap builds. However, this patch also introduced a build warning for !MULTI_OMAP2 builds: arch/arm/mach-omap2/io.c: In function 'omap_irq_base_init': arch/arm/mach-omap2/io.c:322: warning: unused variable 'omap_irq_base' Fix this by removing the ifdef. Also simplify things further by moving omap_irq_base out of entry-macro.S. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
* | console: rename acquire/release_console_sem() to console_lock/unlock()Torben Hohn2011-01-263-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configurationDaniel Morsing2011-01-191-2/+1
| | | | | | | | | | | | | | | | gpio7 on the tps65930 is used as an output on the devkit8000 and gpio1 is not connected. Remove gpio7 and change gpio1 to pulldown Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: omap3: cm-t3517: minor comment fixIgor Grinberg2011-01-191-2/+2
| | | | | | | | | | | | | | offsets in the comment were wrong - fix this. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | arm: omap3: cm-t3517: rtc fixIgor Grinberg2011-01-191-3/+22
| | | | | | | | | | | | | | Fix rtc gpios and mux Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | OMAP: PRCM: remove duplicated headersFelipe Balbi2011-01-183-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few headers are included twice, remove them. Found the following errors using make includecheck: arch/arm/mach-omap2/clock44xx_data.c: prm44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm1_44xx.h is included more than once. arch/arm/mach-omap2/clockdomains44xx_data.c: cm2_44xx.h is included more than once. arch/arm/mach-omap2/powerdomain2xxx_3xxx.c: prm-regbits-34xx.h is included more than once. Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Felipe Balbi <balbi@ti.com> [paul@pwsan.com: dropped lists from patch cc:s; tweaked subject line] Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4Paul Walmsley2011-01-181-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 56a6a19dffda6b75cef8d4183c7c6ff650025cbd ("omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg'") generates a lot of warnings on boot since clockdomain functions that manipulate wake-up dependencies are not implemented yet on OMAP4 for 2.6.38. This patch bypasses the OMAP2/3 functions on OMAP4, which in turn avoids the warnings when the functions would attempt to call the underlying OMAP2/3 PRCM functions. A one-line warning is still logged from the clockdomain code that the OMAP4 wake-up dependency code is not yet implemented. A clockdomain wake-up and sleep dependency implementation for OMAP4 from Rajendra should be possible to merge during the 2.6.39 merge window: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg41748.html http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42222.html Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* | OMAP: counter_32k: init clocksource as part of machine timer initPaul Walmsley2011-01-181-2/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit dc548fbbd2ecd0fc3b02301d551e5f8e19ae58fd ("ARM: omap: convert sched_clock() to use new infrastructure"), OMAPs that use the 32KiHz "synchronization timer" as their clocksource crash during boot: [ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz [ 0.000000] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 0.000000] pgd = c0004000 [ 0.000000] [00000000] *pgd=00000000 [ 0.000000] Internal error: Oops: 80000005 [#1] SMP [ 0.000000] last sysfs file: [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Tainted: G W (2.6.37-07734-g2467802 #7) [ 0.000000] PC is at 0x0 [ 0.000000] LR is at sched_clock_poll+0x2c/0x3c [ 0.000000] pc : [<00000000>] lr : [<c0060b74>] psr: 600001d3 [ 0.000000] sp : c058bfd0 ip : c058a000 fp : 00000000 [ 0.000000] r10: 00000000 r9 : 411fc092 r8 : 800330c8 [ 0.000000] r7 : c05a08e0 r6 : c0034c48 r5 : c05ffc40 r4 : c0034c4c [ 0.000000] r3 : c05ffe6c r2 : c05a0bc0 r1 : c059f098 r0 : 00000000 [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7f Table: 8000404a DAC: 00000017 This is due to the recent ARM init_sched_clock() changes and the late initialization of the counter_32k clock source. More information here: http://marc.info/?l=linux-omap&m=129513468605208&w=2 Fix by initializing the counter_32k clocksource during the machine timer initialization. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Thomas Weber <weber@corscience.de> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2011-01-151-10/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
| * ARM: omap2: irq_data conversion.Lennert Buytenhek2011-01-131-10/+12
| | | | | | | | Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
* | Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds2011-01-1417-42/+258
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (27 commits) omap4: Fix ULPI PHY init for ES1.0 SDP omap3: beaglexm: fix power on of DVI omap3: igep3: Add omap_reserve functionality omap3: beaglexm: fix DVI reset GPIO omap3: beaglexm: fix EHCI power up GPIO dir omap3: igep2: Add keypad support omap3: igep3: Fix IGEP module second MMC channel power supply omap3: igep3: Add USB EHCI support for IGEP module omap3: clocks: Fix build error 'CK_3430ES2' undeclared here arm: omap4: pandaboard: turn on PHY reference clock at init omap2plus: prm: Trvial build break fix for undefined reference to 'omap2_prm_read_mod_reg' omap2plus: voltage: Trivial linking fix for 'EINVAL' undeclared omap2plus: voltage: Trivial linking fix 'undefined reference' omap2plus: voltage: Trivial warning fix 'no return statement' omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_mask arm: omap: gpio: don't access irq_desc array directly omap2+: pm_bus: make functions used as pointers as static OMAP: GPIO: fix _set_gpio_triggering() for OMAP2+ OMAP2+: TWL: include pm header for init protos OMAP2+: TWL: make conversion routines static ... Fix up conflicts in arch/arm/mach-omap2/board-omap3beagle.c ("DVI reset GPIO" vs "use generic DPI panel driver")
| * | omap4: Fix ULPI PHY init for ES1.0 SDPTony Lindgren2011-01-131-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6aa85a5ae610106d89e50c7e1f760c56d12f9bc4 (omap4: 4430sdp: enable the ehci port on 4430SDP) added code to enable EHCI support on 4430sdp board. Looks like the ULPI pin does not seem to be muxed properly on ES1.0 SDP and this causes the system to reboot when the ULPI PHY is enabled. Fix this by muxing the pin, this is the same setting for both ES1.0 and ES2.0. Also add checking for gpio_request. Cc: Keshava Munegowda <keshava_mgowda@ti.com Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: beaglexm: fix power on of DVIKoen Kooi2011-01-111-3/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TFP410 DVI chip is used to provide display out. This chip is controlled by 2 lines: LDO which supplies the power is controlled over gpio + 2 and the enable of the chip itself is done over gpio + 1 NOTE: the LDO is necessary for LED, serial blocks as well. gpio + 1 was used to sense USB overcurrent in vanilla beagle. Without this fix, the display would not function as the LDO remains shut down. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: igep3: Add omap_reserve functionalityEnric Balletbo i Serra2011-01-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds omap_reserve functionality to board-igep0030.c. This patch is in similar lines to commit id 71ee7dad9b6991, from Russell king Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: beaglexm: fix DVI reset GPIOKoen Kooi2011-01-111-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIO reset line for Beagle XM is different from vanilla beagle so we populate it as part of gpio update routine. This in part fixes the issue of display not functioning on beagle XM platform. [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: beaglexm: fix EHCI power up GPIO dirKoen Kooi2011-01-111-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EHCI enable power pin is inverted (active high) in comparison to vanilla beagle which is active low. Handle this case conditionally. Without this fix, Beagle XM 4 port EHCI will not function and no networking will be available [nm@ti.com: split up, added descriptive changelogs] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Koen Kooi <koen@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: igep2: Add keypad supportEnric Balletbo i Serra2011-01-101-0/+33
| | | | | | | | | | | | | | | | | | | | | Support twl4030 keypad and gpio keys on IGEP v2. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: igep3: Fix IGEP module second MMC channel power supplyEnric Balletbo i Serra2011-01-101-10/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The second MMC channel (used by the WLAN/BT module) is not linked to power regulator. This causes the WLAN/BT module to fail being detected if CONFIG_REGULATOR_DUMMY is not set. This patch adds the two regulators that actually feed the WLAN/BT module (1v8 from the TWL4030 VIO LDO, and a fixed 3v3). With that patch, the second channel is properly detected. Also change vmmc1 to use symbolic names instead of direct device reference. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Marc Zyngier <maz@misterjones.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: igep3: Add USB EHCI support for IGEP moduleEnric Balletbo i Serra2011-01-101-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | The OMAP3 IGEP module has one EHCI interface on board using USB2HS port. GPIO183 is used as PHY reset. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | Merge branch 'ehci-omap-clock' into omap-fixesTony Lindgren2011-01-1013-33/+451
| |\ \
| | * | omap3: clocks: Fix build error 'CK_3430ES2' undeclared hereSantosh Shilimkar2011-01-101-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At latest mainline commit 0c21e3aaf6a, omap2plus build is broken. This patch is trivial fix for the missed usb clock node for CK_3430ES2PLUS flag update. CHK include/generated/compile.h CC arch/arm/mach-omap2/clock3xxx_data.o arch/arm/mach-omap2/clock3xxx_data.c:3289: error: 'CK_3430ES2' undeclared here (not in a function) make[1]: *** [arch/arm/mach-omap2/clock3xxx_data.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated mask to include CK_36XX] Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | arm: omap4: pandaboard: turn on PHY reference clock at initAnand Gadiyar2011-01-101-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SMSC 3320 USB PHY on the OMAP4 Pandaboard needs a 19.2 MHz reference clock. This clock is provided from the OMAP4's fref_clk3 pad. Recent changes to clock44xx_data.c made the clock framework aware of the existence of these fref_clk[i] lines. If the option CONFIG_OMAP_RESET_CLOCKS is enabled in the kernel, then the clock framework will turn these clocks off during bootup. Explicitly request and keep this clock enabled at init for the Pandaboard, so that the PHY receives this clock at all times. Reported-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Reviewed-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap2plus: prm: Trvial build break fix for undefined reference to ↵Santosh Shilimkar2011-01-071-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'omap2_prm_read_mod_reg' omap2plus_defocnfig build breaks when customised with only ARCH_OMAP4 selected. This is because common files make references to the functions which are defined only for omap2xxx and omap3xxx. LD .tmp_vmlinux1 arch/arm/mach-omap2/built-in.o: In function `pm_dbg_regset_store': arch/arm/mach-omap2/pm-debug.c:335: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/built-in.o: In function `omap2_pm_dump': arch/arm/mach-omap2/pm-debug.c:121: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/pm-debug.c:123: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/pm-debug.c:124: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/pm-debug.c:125: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/built-in.o: In function `omap_prcm_arch_reset': arch/arm/mach-omap2/prcm.c:106: undefined reference to `omap2_prm_set_mod_reg_bits' arch/arm/mach-omap2/prcm.c:108: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/built-in.o: In function `omap_prcm_get_reset_sources': arch/arm/mach-omap2/prcm.c:53: undefined reference to `omap2_prm_read_mod_reg' arch/arm/mach-omap2/built-in.o: In function `clkdm_clear_all_wkdeps': arch/arm/mach-omap2/clockdomain.c:545: undefined reference to `omap2_prm_clear_mod_reg_bits' arch/arm/mach-omap2/built-in.o: In function `clkdm_del_wkdep': arch/arm/mach-omap2/clockdomain.c:475: undefined reference to `omap2_prm_clear_mod_reg_bits' arch/arm/mach-omap2/built-in.o: In function `clkdm_read_wkdep': arch/arm/mach-omap2/clockdomain.c:511: undefined reference to `omap2_prm_read_mod_bits_shift' arch/arm/mach-omap2/built-in.o: In function `clkdm_add_wkdep': arch/arm/mach-omap2/clockdomain.c:440: undefined reference to `omap2_prm_set_mod_reg_bits' make: *** [.tmp_vmlinux1] Error 1 This patch adds stubs for these functions so that build continues to work. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | omap2plus: clockdomain: Trivial fix for build break because of clktrctrl_maskSantosh Shilimkar2011-01-071-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | struct clockdomain member clktrctrl_mask is available for only for OMAP2 and OMAP3 architectures. Technially it is also used only for these archs but this breaks the build with custom OMAP4 configuration. CC arch/arm/mach-omap2/clockdomain.o arch/arm/mach-omap2/clockdomain.c: In function '_enable_hwsup': arch/arm/mach-omap2/clockdomain.c:251: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:254: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function '_disable_hwsup': arch/arm/mach-omap2/clockdomain.c:277: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:280: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_sleep': arch/arm/mach-omap2/clockdomain.c:744: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_wakeup': arch/arm/mach-omap2/clockdomain.c:789: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_clk_enable': arch/arm/mach-omap2/clockdomain.c:922: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:926: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c: In function 'omap2_clkdm_clk_disable': arch/arm/mach-omap2/clockdomain.c:994: error: 'struct clockdomain' has no member named 'clktrctrl_mask' arch/arm/mach-omap2/clockdomain.c:998: error: 'struct clockdomain' has no member named 'clktrctrl_mask' make[1]: *** [arch/arm/mach-omap2/clockdomain.o] Error 1 make: *** [arch/arm/mach-omap2] Error 2 Fix the build break by dropping the #ifdef as suggested by Paul Walmsley Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | omap2+: pm_bus: make functions used as pointers as staticNishanth Menon2011-01-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap_pm_runtime_suspend and omap_pm_runtime_resume are used as function pointers and does not really need to be exposed to the world. Fixes sparse warnings: arch/arm/mach-omap2/pm_bus.c:23:5: warning: symbol 'omap_pm_runtime_suspend' was not declared. Should it be static? arch/arm/mach-omap2/pm_bus.c:40:5: warning: symbol 'omap_pm_runtime_resume' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | OMAP2+: TWL: include pm header for init protosNishanth Menon2011-01-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | twl_init functions are declared in pm.h and used in pm.c pm.h header defining the protos need to be included to ensure that omap_twl.c has consistent function definition. This fixes sparse warning: arch/arm/mach-omap2/omap_twl.c:237:12: warning: symbol 'omap4_twl_init' was not declared. Should it be static? arch/arm/mach-omap2/omap_twl.c:256:12: warning: symbol 'omap3_twl_init' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | OMAP2+: TWL: make conversion routines staticNishanth Menon2011-01-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uv_to_vsel, vsel_to_uv functions don't need to be exposed to the world as they are used as function pointers. make them static. Fixes sparse warnings: arch/arm/mach-omap2/omap_twl.c:63:15: warning: symbol 'twl4030_vsel_to_uv' was not declared. Should it be static? arch/arm/mach-omap2/omap_twl.c:68:4: warning: symbol 'twl4030_uv_to_vsel' was not declared. Should it be static? arch/arm/mach-omap2/omap_twl.c:73:15: warning: symbol 'twl6030_vsel_to_uv' was not declared. Should it be static? arch/arm/mach-omap2/omap_twl.c:105:4: warning: symbol 'twl6030_uv_to_vsel' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | OMAP3+: sr_device: include pm headerNishanth Menon2011-01-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap_enable_smartreflex_on_init is meant to be used by boards which would like to have SR enabled by default on the platform, while omap_devinit_smartreflex is used by pm code, the protos are defined in pm.h. This header should be included to ensure that sr_device function definitions match the prototypes. including pm.h fixes the sparse warnings (with CONFIG_OMAP_SMARTREFLEX=y): arch/arm/mach-omap2/sr_device.c:138:13: warning: symbol 'omap_enable_smartreflex_on_init' was not declared. Should it be static? arch/arm/mach-omap2/sr_device.c:143:12: warning: symbol 'omap_devinit_smartreflex' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
| * | omap2+: wdt: trivial sparse fixesNishanth Menon2011-01-062-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap2_wd_timer_disable is declared in wdtimer.h and used by hwmod function pointers for usage, the header inclusion is necessary to ensure that the prototype and function remains consistent. omap_wdt_latency is passed as a pointer and does not need global scope Fixes sparse warnings: arch/arm/mach-omap2/devices.c:981:31: warning: symbol 'omap_wdt_latency' was not declared. Should it be static? arch/arm/mach-omap2/wd_timer.c:27:5: warning: symbol 'omap2_wd_timer_disable' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: igep3: make igep3_flash_init staticNishanth Menon2011-01-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | igep3_flash_init is not used beyond the scope of the file, make it static instead. Fixes sparse warning: arch/arm/mach-omap2/board-igep0030.c:106:13: warning: symbol 'igep3_flash_init' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3: zoom: use static for pointer passingNishanth Menon2011-01-061-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | omap_zoom_wlan_data and zoom2_set_hs_extmute are not used beyond the scope of zoom-peripherals directly, instead pointers are used. make them static instead. Fixes sparse warnings: arch/arm/mach-omap2/board-zoom-peripherals.c:193:29: warning: symbol 'omap_zoom_wlan_data' was not declared. Should it be static? arch/arm/mach-omap2/board-zoom-peripherals.c:245:6: warning: symbol 'zoom2_set_hs_extmute' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | omap3|4: mux: make local structures staticNishanth Menon2011-01-062-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mux data is passed by pointers to mux.c from the SoC specific mux file, these variables dont really need to be global scope. This fixes the following sparse warnings: arch/arm/mach-omap2/mux44xx.c:547:29: warning: symbol 'omap4_core_cbl_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux44xx.c:1265:29: warning: symbol 'omap4_core_cbs_ball' was not declared. Should it be static? arch/arm/mach-omap2/mux44xx.c:1549:29: warning: symbol 'omap4_wkup_cbl_cbs_ball' was not declared. Should it be static? Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
| * | arm: mach-omap2: mux: fix buffer overrunAaro Koskinen2011-01-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | memcpy() copies 8 bytes too much (omap_mux_entry vs. omap_mux). Correct by replacing memcpy() with struct assignment, which is safer. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | | Merge branch 'idle-release' of ↵Linus Torvalds2011-01-131-0/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer intel_idle: open broadcast clock event cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specific cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idle cpuidle: delete unused CPUIDLE_FLAG_SHALLOW, BALANCED, DEEP definitions SH, cpuidle: delete use of NOP CPUIDLE_FLAGS_SHALLOW cpuidle: delete NOP CPUIDLE_FLAG_POLL ACPI: processor_idle: delete use of NOP CPUIDLE_FLAGs cpuidle: Rename X86 specific idle poll state[0] from C0 to POLL ACPI, intel_idle: Cleanup idle= internal variables cpuidle: Make cpuidle_enable_device() call poll_idle_init() intel_idle: update Sandy Bridge core C-state residency targets
| * \ \ Merge branch 'linus' into idle-testLen Brown2011-01-12157-5324/+18025
| |\ \ \ | | | |/ | | |/|
| * | | cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specificLen Brown2011-01-121-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Len Brown <len.brown@intel.com>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds2011-01-1314-40/+328
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (29 commits) video: move SH_MIPI_DSI/SH_LCD_MIPI_DSI to the top of menu fbdev: Implement simple blanking in pseudocolor modes for vt8500lcdfb video: imx: Update the manufacturer's name nuc900fb: don't treat NULL clk as an error s3c2410fb: don't treat NULL clk as an error video: tidy up modedb formatting. video: matroxfb: Correct video option in comments and kernel config help. fbdev: sh_mobile_hdmi: simplify pointer handling fbdev: sh_mobile_hdmi: framebuffer notifiers have to be registered fbdev: sh_mobile_hdmi: add command line option to use the preferred EDID mode OMAP: DSS2: Introduce omap_channel as an omap_dss_device parameter, add new overlay manager. OMAP: DSS2: Use dss_features to handle DISPC bits removed on OMAP4 OMAP: DSS2: LCD2 Channel Changes for DISPC OMAP: DSS2: Change remaining DISPC functions for new omap_channel argument OMAP: DSS2: Introduce omap_channel argument to DISPC functions used by interface drivers OMAP: DSS2: Represent DISPC register defines with channel as parameter OMAP: DSS2: Add dss_features for omap4 and overlay manager related features OMAP: DSS2: Clean up DISPC color mode validation checks OMAP: DSS2: Add back authors of panel-generic.c based drivers OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers ...
| * \ \ \ Merge branch 'for-paul-38-rebased' of git://gitorious.org/linux-omap-dss2/linuxPaul Mundt2011-01-1114-40/+328
| |\ \ \ \ | | |_|/ / | |/| | |
generated by cgit v1.1 at 2025-02-10 04:50:50 +0000