aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-orion5x
Commit message (Collapse)AuthorAgeFilesLines
* ARM: Fix gen_nand probe structures contentsMarek Vasut2010-08-121-0/+1
| | | | | | | | | | These three platforms didn't properly fill nr_chips in gen_nand registration and therefore depended on gen_nand bug fixed by commit 81cbb0b17796d81cbd92defe113cf2a7c7a21fbb ("mtd: gen_nand: fix support for multiple chips") Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* [ARM] Orion: DNS-323 C1 requires phylibMartin Michlmayr2010-07-161-0/+1
| | | | | | | | | The code to support the DNS-323 rev C1 added a call to phy_register_fixup_for_uid() and therefore phylib has to be built in. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] orion5x: Fix soft-reset for some platformsBenjamin Herrenschmidt2010-07-161-0/+2
| | | | | | | | | | | | Some platforms, such as the DNS-323 rev C requires the soft reset line to be toggled on and back off for the reset to work. Note: The choice of 200ms delay comes from the 2.6.12 based vendor kernel. It seems to be a -lot- though and I had my device working fine with much smaller delays but better safe... Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] orion5x: Base support for DNS-323 rev C1Benjamin Herrenschmidt2010-07-161-62/+305
| | | | | | | | | | This patch adds the base support for this new HW revision to the existing dns323-setup.c file. The SoC seems to be the same as rev B1, the GPIOs are all wired differently though and the fan control isn't i2c based anymore. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* [ARM] orion5x: Set links to solid on D-Link DNS-323Martin Michlmayr2010-07-161-2/+1
| | | | | | | | | | | | | | | Among other changes, commit b2a731aa ("D-link DNS-323 revision A1 power LED") changed the default behaviour of the power LED from solid to blinking. This was done to match the original DNS-323 firmware which blinks during the boot process and sets the LED to solid when booting has completed. However, the downside of this behaviour is that it requires userland code to change the LED, even for those who don't care about the behaviour of the original firmware. Therefore, change it to solid again and let those who care about the original behaviour change the behaviour from userland. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
* leds: leds-gpio: Change blink_set callback to be able to turn off blinkingBenjamin Herrenschmidt2010-05-261-10/+12
| | | | | | | | | | | | | | | | | | | The leds-gpio blink_set() callback follows the same prototype as the main leds subsystem blink_set() one. The problem is that to stop blink, normally, a leds driver does it in the brightness_set() callback when asked to set a new fixed value. However, with leds-gpio, the platform has no hook to do so, as this later callback results in a standard GPIO manipulation. This changes the leds-gpio specific callback to take a new argument that indicates whether the LED should be blinking or not and in what state it should be set if not. We also update the dns323 platform which seems to be the only user of this so far. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
* [ARM] dns323-setup.c: fix WARN() when bootingArnaud Patard2010-05-031-0/+1
| | | | | | | | | | | | | Since commit b2a731aa5cbca7e0252da75e16de7ae5feb1313a, dns323_init() is setting the power led gpio direction with gpio_direction_output() but doesn't request the gpio before (which is not permitted by the gpio layer afaik). This behaviour is triggering a WARN() at boot time. Tested-by: Christian Samsel <csamsel@gmxpro.de> Cc: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Nicolas Pitre <nico@marvell.com> [ Part 2: "Attached Text" ]
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [ARM] Orion5x: replace KEY_WLAN with KEY_WPS_BUTTONChristian Lamparter2010-03-231-1/+1
| | | | | | | | "Input: add KEY_WPS_BUTTON definition" introduced a generic keycode for WPS input events. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* Merge branch 'origin' into devel-stableRussell King2010-03-082-2/+2
|\ | | | | | | | | | | | | Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
| * Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2010-03-012-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (100 commits) ARM: Eliminate decompressor -Dstatic= PIC hack ARM: 5958/1: ARM: U300: fix inverted clk round rate ARM: 5956/1: misplaced parentheses ARM: 5955/1: ep93xx: move timer defines into core.c and document ARM: 5954/1: ep93xx: move gpio interrupt support to gpio.c ARM: 5953/1: ep93xx: fix broken build of clock.c ARM: 5952/1: ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig ARM: 5949/1: NUC900 add gpio virtual memory map ARM: 5948/1: Enable timer0 to time4 clock support for nuc910 ARM: 5940/2: ARM: MMCI: remove custom DBG macro and printk ARM: make_coherent(): fix problems with highpte, part 2 MM: Pass a PTE pointer to update_mmu_cache() rather than the PTE itself ARM: 5945/1: ep93xx: include correct irq.h in core.c ARM: 5933/1: amba-pl011: support hardware flow control ARM: 5930/1: Add PKMAP area description to memory.txt. ARM: 5929/1: Add checks to detect overlap of memory regions. ARM: 5928/1: Change type of VMALLOC_END to unsigned long. ARM: 5927/1: Make delimiters of DMA area globally visibly. ARM: 5926/1: Add "Virtual kernel memory..." printout. ARM: 5920/1: OMAP4: Enable L2 Cache ... Fix up trivial conflict in arch/arm/mach-mx25/clock.c
| | * Merge branch 'misc2' into develRussell King2010-02-251-1/+1
| | |\
| | | * ARM: 5928/1: Change type of VMALLOC_END to unsigned long.Fenkart/Bostandzhyan2010-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Makes it consistent with VMALLOC_START Tested-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| | * | ARM: 5910/1: ARM: Add tmp register for addruart and loadspTony Lindgren2010-02-121-1/+1
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise more complicated uart configuration won't be possible. We can use r1 for tmp register for both head.S and debug.S. NOTE: This patch depends on another patch to add the the tmp register into all debug-macro.S files. That can be done with: $ sed -i -e "s/addruart,rx|addruart, rx/addruart, rx, tmp/" arch/arm/*/include/*/debug-macro.S Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | [ARM] orion5x: D-link DNS-323 revision A1 power LEDLaurie Bradshaw2010-02-101-3/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the power LED on DNS-323 revision A1, and adds timer support for (hopefully) both A1 and B1 revisions. Power LED on revision A1 is active low and also requires GPIO 4 to be low to work. Tested on my DNS-323 revision A1. I have set the default trigger to timer as that replicates the behaviour of the original firmware, userspace can change the trigger at the end of the boot process providing a useful indication that booting has completed. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | | [ARM] Orion5x: enable SATA LED blinking for d2netSimon Guinot2010-02-091-24/+17
| | | | | | | | | | | | | | | Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | | [ARM] Orion5x: set valid GPIO inhibit power-off for d2netSimon Guinot2010-02-091-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | This patch allow user-space to configure the switch power-off behaviour via the gpiolib sysfs interface. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | | [ARM] orion5x: fix some improper includes in Linkstation filesNicolas Pitre2010-02-052-8/+8
| | | | | | | | | | | | | | | | | | ... and replace misuse of arch_reset() with arm_machine_restart(). Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | | [ARM] Orion: Add Buffalo Linkstation LS-HGL supportZhu Qingsen2010-02-053-0/+284
| | | | | | | | | | | | | | | Signed-off-by: Zhu Qingsen <zhuqs@cn.fujitsu.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | | mach-orion5x/common.c: remove unnecessary (void *) castsH Hartley Sweeten2010-02-041-2/+2
|/ / | | | | | | | | | | | | | | | | The (void *) cast is not needed when setting dev.platform_data to the address of the data. Remove the casts. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | [ARM] orion5x: D-link DNS-323 rev. B1 power-offErik Benada2010-01-241-6/+27
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes power LED blinking and power-off on DNS-323 rev. B1. GPIO pin 3 has to be set to 1 to stop power LED blinking and to allow the LED to be controlled via leds-gpio. This pin has to be also set to 1 for power-off to work. To power-off the rev. B1 machine, pin 8 has to be set to 1 and then set to 0 to do actual power-off. Tested on my DNS-323 rev. B1 Signed-off-by: Erik Benada <erikbenada@yahoo.ca> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | [ARM] Orion5x: add GPIO LED and buttons for wrt350n v2Dirk Teurlings2010-01-131-0/+79
|/ | | | | | Signed-off-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* tree-wide: fix assorted typos all over the placeAndré Goddard Rosa2009-12-041-1/+1
| | | | | | | | | | That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [ARM] orion5x: Add LaCie NAS 2Big Network supportSimon Guinot2009-09-083-0/+439
| | | | | | | This patch add support for the 2Big Network LaCie boards. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* ¶ARM] Orion5x: fix cpu window mapping for 88f6183Lennert Buytenhek2009-08-101-1/+2
| | | | | | | | | | | On the 88f6183, orion5x's setup_cpu_win() fails to ever program any mbus bridge remap registers, which causes transactions for PCI/PCIe IO/MEM space to get sent to random mbus targets. Adding a check for the 6183 in orion5x_cpu_win_can_remap() is necessary and sufficient to make PCIe wlan cards work on the 6183 reference design. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion5x: Add LaCie NAS d2Network supportSimon Guinot2009-08-103-0/+381
| | | | | | | | | This patch add support for the d2 Network and the Big Disk Network LaCie boards. Signed-off-by: Simon Guinot <sguinot@lacie.com> Acked-by: Christopher Moore <moore@free.fr> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion5x: register the crypto device on SOCs that support itNicolas Pitre2009-06-152-2/+9
| | | | | | Not all Orion variants do implement the crypto unit. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion5x: increment window counter after adding sram mappingSebastian Andrzej Siewior2009-06-151-1/+1
| | | | | | | | Without incrementing the counter the next window setup will overwrite the SRAM mapping. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion5x: add sram support for cryptoSebastian Andrzej Siewior2009-06-084-2/+56
| | | | | | | | | | | | The security accelerator which can act as a puppet player for the crypto engine requires its commands in the sram. This patch adds support for the phys mapping and creates a platform device for the actual driver. [ nico: renamed device name from "mv,orion5x-crypto" to "mv_crypto" so to match the module name and be more generic for Kirkwood use ] Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion5x: WNR854T switch supportImre Kaloz2009-06-081-0/+16
| | | | | | | | This patch adds support for the switch found on the Netgear WNR854T router. Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion/Kirkwood: rename orion5x_wdt to orion_wdtNicolas Pitre2009-06-081-3/+3
| | | | | | | | | The Orion watchdog driver is also used on Kirkwood. Convention is to use orion5x for stuff specific to 88F5xxx Orion chips and simply "orion" for shared stuff across SoCs including Kirkwood. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion5x: Change names of defines for Reset-Out-Mask registerThomas Reitmayr2009-06-083-5/+5
| | | | | | | | | | | | | The name of the define for the Reset-Out-Mask register as well as its bit for the watchdog reset are changed to match the names used for Kirkwood (which in turn match the processor specification more closely). There is no functional change. This patch prepares for adding orion5x_wdt as a platform device to Kirkwood. Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion: convert gpio to use gpiolibErik Benada2009-06-081-0/+3
| | | | | | | | Signed-off-by: Erik Benada <erikbenada@yahoo.ca> [ nico: fix locking, additional cleanups ] Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] orion: add hwrng timeriomem hook to TS-78xxAlexander Clouter2009-06-032-0/+59
| | | | | | | Add hook so that the HW RNG source on the TS-78xx is available. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] add coherent DMA mask for mv643xx_ethNicolas Pitre2009-05-221-0/+3
| | | | | | | | Since commit eb0519b5a1cf, mv643xx_eth is non functional on ARM because the platform device declaration does not include any coherent DMA mask and coherent memory allocations fail. Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] Orion: Remove explicit name for platform device resourcesMartin Michlmayr2009-05-211-2/+0
| | | | | | | | | | Remove explicit names from platform device resources since they will automatically be named after the platform device they're associated with. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* [ARM] 5460/1: Orion: reduce namespace pollutionNicolas Pitre2009-04-238-52/+68
| | | | | | | | | | | | | | | | | Symbols like SOFT_RESET are way too generic to be exported at large. To avoid this, let's move the mbus bridge register defines into a separate file and include it where needed. This affects mach-kirkwood, mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all share code in plat-orion which relies on those defines. Some other defines have been moved to narrower scopes, or simply deleted when they had no user. This fixes compilation problem with mpt2sas on the above listed platforms. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-071-1/+1
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'origin' into develRussell King2009-03-285-9/+63
|\ | | | | | | | | Conflicts: sound/soc/pxa/pxa2xx-i2s.c
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds2009-03-265-9/+34
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1750 commits) ixgbe: Allow Priority Flow Control settings to survive a device reset net: core: remove unneeded include in net/core/utils.c. e1000e: update version number e1000e: fix close interrupt race e1000e: fix loss of multicast packets e1000e: commonize tx cleanup routine to match e1000 & igb netfilter: fix nf_logger name in ebt_ulog. netfilter: fix warning in ebt_ulog init function. netfilter: fix warning about invalid const usage e1000: fix close race with interrupt e1000: cleanup clean_tx_irq routine so that it completely cleans ring e1000: fix tx hang detect logic and address dma mapping issues bridge: bad error handling when adding invalid ether address bonding: select current active slave when enslaving device for mode tlb and alb gianfar: reallocate skb when headroom is not enough for fcb Bump release date to 25Mar2009 and version to 0.22 r6040: Fix second PHY address qeth: fix wait_event_timeout handling qeth: check for completion of a running recovery qeth: unregister MAC addresses during recovery. ... Manually fixed up conflicts in: drivers/infiniband/hw/cxgb3/cxio_hal.h drivers/infiniband/hw/nes/nes_nic.c
| | * Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller2009-03-261-0/+7
| | |\ | | | | | | | | | | | | | | | | Conflicts: drivers/net/wimax/i2400m/usb-notif.c
| | * | dsa: add switch chip cascading supportLennert Buytenhek2009-03-215-9/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The initial version of the DSA driver only supported a single switch chip per network interface, while DSA-capable switch chips can be interconnected to form a tree of switch chips. This patch adds support for multiple switch chips on a network interface. An example topology for a 16-port device with an embedded CPU is as follows: +-----+ +--------+ +--------+ | |eth0 10| switch |9 10| switch | | CPU +----------+ +-------+ | | | | chip 0 | | chip 1 | +-----+ +---++---+ +---++---+ || || || || ||1000baseT ||1000baseT ||ports 1-8 ||ports 9-16 This requires a couple of interdependent changes in the DSA layer: - The dsa platform driver data needs to be extended: there is still only one netdevice per DSA driver instance (eth0 in the example above), but each of the switch chips in the tree needs its own mii_bus device pointer, MII management bus address, and port name array. (include/net/dsa.h) The existing in-tree dsa users need some small changes to deal with this. (arch/arm) - The DSA and Ethertype DSA tagging modules need to be extended to use the DSA device ID field on receive and demultiplex the packet accordingly, and fill in the DSA device ID field on transmit according to which switch chip the packet is heading to. (net/dsa/tag_{dsa,edsa}.c) - The concept of "CPU port", which is the switch chip port that the CPU is connected to (port 10 on switch chip 0 in the example), needs to be extended with the concept of "upstream port", which is the port on the switch chip that will bring us one hop closer to the CPU (port 10 for both switch chips in the example above). - The dsa platform data needs to specify which ports on which switch chips are links to other switch chips, so that we can enable DSA tagging mode on them. (For inter-switch links, we always use non-EtherType DSA tagging, since it has lower overhead. The CPU link uses dsa or edsa tagging depending on what the 'root' switch chip supports.) This is done by specifying "dsa" for the given port in the port array. - The dsa platform data needs to be extended with information on via which port to reach any given switch chip from any given switch chip. This info is specified via the per-switch chip data struct ->rtable[] array, which gives the nexthop ports for each of the other switches in the tree. For the example topology above, the dsa platform data would look something like this: static struct dsa_chip_data sw[2] = { { .mii_bus = &foo, .sw_addr = 1, .port_names[0] = "p1", .port_names[1] = "p2", .port_names[2] = "p3", .port_names[3] = "p4", .port_names[4] = "p5", .port_names[5] = "p6", .port_names[6] = "p7", .port_names[7] = "p8", .port_names[9] = "dsa", .port_names[10] = "cpu", .rtable = (s8 []){ -1, 9, }, }, { .mii_bus = &foo, .sw_addr = 2, .port_names[0] = "p9", .port_names[1] = "p10", .port_names[2] = "p11", .port_names[3] = "p12", .port_names[4] = "p13", .port_names[5] = "p14", .port_names[6] = "p15", .port_names[7] = "p16", .port_names[10] = "dsa", .rtable = (s8 []){ 10, -1, }, }, }, static struct dsa_platform_data pd = { .netdev = &foo, .nr_switches = 2, .sw = sw, }; Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | [WATCHDOG] orion5x_wdt: fix compile issue by providing tclk as platform dataThomas Reitmayr2009-03-251-0/+29
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The orion5x-wdt driver is now registered as a platform device and receives the tclk value as platform data. This fixes a compile issue cause by a previously removed define "ORION5X_TCLK". Signed-off-by: Thomas Reitmayr <treitmayr@devbase.at> Acked-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Kristof Provost <kristof@sigsegv.be> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Martin Michlmayr <tbm@cyrius.com> Cc: Sylver Bruneau <sylver.bruneau@googlemail.com> Cc: Kunihiko IMAI <bak@d2.dion.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* | | Merge git://git.marvell.com/orion into develRussell King2009-03-252-4/+13
|\ \ \
| * | | [ARM] orion5x: update of FPGA ID's for the TS-78xxAlexander Clouter2009-03-232-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Received official word finally from Technological Systems on which FPGA ID's they have released unto the world. Also an additional of a dummy entry matching the FPGA ID of the Verilog template on our wiki. Signed-off-by: Alexander Clouter <alex@digriz.org.uk> Signed-off-by: Nicolas Pitre <nico@marvell.com>
* | | | Merge branch 'master' of git://git.marvell.com/orion into develRussell King2009-03-195-112/+370
|\ \ \ \ | |/ / / | | | | | | | | | | | | | | | | Conflicts: arch/arm/mach-mx1/devices.c
| * | | Merge commit '305b07680f' into orion/masterNicolas Pitre2009-03-151-0/+7
| |\ \ \ | | |/ /
| | * | [ARM] orion5x: pass dram mbus data to xor driverSaeed Bishara2009-03-031-0/+7
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | This data should be passed to the xor driver in order to initialize the address decoding windows of the xor unit. without this patch, the self tests of the xor will fail unless the address decoding windows were initialized by the boot loader. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
| * | [ARM] Orion: Fix some typos in the DNS-323 support codeMartin Michlmayr2009-03-101-2/+2
| | | | | | | | | | | | | | | | | | | | | Fix some typos in the DNS-323 support code. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
generated by cgit v1.1 at 2024-12-26 18:02:01 +0000