aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc/boot
Commit message (Collapse)AuthorAgeFilesLines
* powerpc/install: Bail with error code on error in install scriptGrant Likely2009-06-151-0/+3
| | | | | | | | | If anything goes wrong when copying images into the install path, then the install script should exit with an error code so that 'make' knows about it and tells the user. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* Merge commit 'jwb/next' into nextBenjamin Herrenschmidt2009-06-121-0/+22
|\
| * powerpc/4xx: Sequoia: Enable NAND supportStefan Roese2009-06-041-0/+22
| | | | | | | | | | | | | | | | | | Now that the 4xx NAND driver is available again in arch/powerpc, let's enable it on Sequoia. This patch also disables the early debug messages (CONFIG_PPC_EARLY_DEBUG) in the Sequoia defconfig. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/virtex: Add ml510 reference design device treeRoderick Colenbrander2009-06-061-0/+465
|/ | | | | | | | As subject says, add dts files for Xilinx ML510 reference design with the PCI host bridge device. Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* powerpc: Update Warp to use leds-gpio driverSean MacLennan2009-05-211-14/+13
| | | | | | | | | | | | Now that leds-gpio is a proper OF platform driver, the Warp can use the leds-gpio driver rather than the old out-of-kernel driver. One side-effect is the leds-gpio driver always turns the leds off while the old driver left them alone. So we have to set them back to the correct settings. Signed-off-by: Sean MacLennan <smaclennan@pikatech.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* powerpc/85xx: Add P2020DS board supportKumar Gala2009-05-191-0/+704
| | | | | | | | | | | | | | | | | | | The P2020 is a dual e500v2 core based SOC with: * 3 PCIe controllers * 2 General purpose DMA controllers * 2 sRIO controllers * 3 eTSECS * USB 2.0 * SDHC * SPI, I2C, DUART * enhanced localbus * and optional Security (P2020E) security w/XOR acceleration The p2020 DS reference board is pretty similar to the existing MPC85xx DS boards and has a ULI 1575 connected on one of the PCIe controllers. Signed-off-by: Ted Peters <Ted.Peters@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/8xxx: Update PCI outbound window addresses for 36-bit configsKumar Gala2009-05-192-19/+19
| | | | | | | | | | | | | In these configuration we expect to have large amounts of memory (> 4G) and thus will bounce via swiotlb some region of PCI address space. The outbound windows were wasting 512M of address space by leaving a gap between the top of the outbound window and the 4G boundary. By moving the top of the outbound window up to the 4G boundary we can reclaim the vast majority of the 512M (minus space needed for PEXCSRBAR) and thus reduces the amount of memory we have to bounce. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add MSI nodes for MPC8568/9 MDS systemsKumar Gala2009-05-192-0/+32
| | | | | | The MPC8568/9 chips support MSIs on PCIe so no reason not to enable them. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add STMicro M25P40 serial flash support for MPC8569E-MDSAnton Vorontsov2009-05-191-3/+23
| | | | | | | | | | | | For serial flash support we need to: - Add QE Par IO Bank E device tree node, a GPIO from this bank is used for SPI chip-select line; - Add serial-flash node; - Add proper module alias into of/base.c. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Enable Serial RapidIO for MPC85xx MDS boardsAnton Vorontsov2009-05-192-0/+34
| | | | | | | | Select HAS_RAPIDIO symbol and add rio nodes for MPC8568E-MDS and MPC8569E-MDS boards. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add eSDHC support for MPC8569E-MDS boardsAnton Vorontsov2009-05-191-0/+10
| | | | | | | | | | Note that eSDHC and DUART0 are mutually exclusive on MPC8569E-MDS boards. Default option is DUART0, so eSDHC is disabled by default. U-Boot will fixup device tree if eSDHC should be used instead of DUART0. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Fix reg & interrupts for mpc8569emds localbus added NANDAnton Vorontsov2009-05-191-2/+9
| | | | | | | | | | This patch fixes bogus reg = <> property in the localbus node, and fixes interrupt property (should be "interrupts"). Also add node for NAND support. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Fix mpc8569emds crypto node to include SNOW unitAnton Vorontsov2009-05-191-1/+1
| | | | | | | | fsl,exec-units-mask should be 0xbfe to include SNOW unit in MPC8569E's security engine. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Removed reg property from 85xx/86xx soc nodeKumar Gala2009-05-1930-30/+0
| | | | | | | | | | | Between the addition of the ecm/mcm law nodes and the fact that the get_immrbase() has been using the range property of the SoC to determine the base address of CCSR space we no longer need the reg property at the soc node level. It has been ill specified and varied between device trees to cover either the {e,m}cm-law node, some odd subset of CCSR space or all of CCSR space. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/qe: add new qe properties for QE based chipsHaiying Wang2009-05-195-0/+10
| | | | | | | | Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which have qe node. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add MPC8569MDS board supportHaiying Wang2009-05-191-0/+514
| | | | | | | | | The MPC8569 is similiar to the MPC8568. It doubles the number of QUICC Engine RISC cores from 2 to 4. Removes eTSECs, TLU and adds the eSDHC controller. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/86xx: Add new LAW & MCM device tree nodes for all 86xx systemsKumar Gala2009-05-197-0/+91
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systemsKumar Gala2009-05-1922-0/+286
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/86xx: Add 36-bit device tree for mpc8641hpcnBecky Bruce2009-05-191-0/+597
| | | | | | | | The new dts places most of the devices in physical address space above 32-bits, which allows us to have more than 4GB of RAM present. Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/fsl: Remove cell-index from PCI nodesKumar Gala2009-05-1935-59/+0
| | | | | | | | The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'merge' of ↵Linus Torvalds2009-05-152-6/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Fix PCI ROM access powerpc/pseries: Really fix the oprofile CPU type on pseries serial/nwpserial: Fix wrong register read address and add interrupt acknowledge. powerpc/cell: Make ptcal more reliable powerpc: Allow mem=x cmdline to work with 4G+ powerpc/mpic: Fix incorrect allocation of interrupt rev-map powerpc: Fix oprofile sampling of marked events on POWER7 powerpc/iseries: Fix pci breakage due to bad dma_data initialization powerpc: Fix mktree build error on Mac OS X host powerpc/virtex: Fix duplicate level irq events. powerpc/virtex: Add uImage to the default images list powerpc/boot: add simpleImage.* to clean-files list powerpc/8xx: Update defconfigs powerpc/embedded6xx: Update defconfigs powerpc/86xx: Update defconfigs powerpc/85xx: Update defconfigs powerpc/83xx: Update defconfigs powerpc/fsl_soc: Remove mpc83xx_wdt_init, again
| * powerpc: Fix mktree build error on Mac OS X hostTimur Tabi2009-05-151-5/+5
| | | | | | | | | | | | | | | | | | | | The mktree utility defines some variables as "uint", although this is not a standard C type, and so cross-compiling on Mac OS X fails. Change this to "unsigned int". Signed-off-by: Timur Tabi <timur@freescale.com> Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/boot: add simpleImage.* to clean-files listGrant Likely2009-05-141-1/+1
| | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | Move dtc and libfdt sources from arch/powerpc/boot to scripts/dtcDavid Gibson2009-05-0230-11152/+24
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | The powerpc kernel always requires an Open Firmware like device tree to supply device information. On systems without OF, this comes from a flattened device tree blob. This blob is usually generated by dtc, a tool which compiles a text description of the device tree into the flattened format used by the kernel. Sometimes, the bootwrapper makes small changes to the pre-compiled device tree blob (e.g. filling in the size of RAM). To do this it uses the libfdt library. Because these are only used on powerpc, the code for both these tools is included under arch/powerpc/boot (these were imported and are periodically updated from the upstream dtc tree). However, the microblaze architecture, currently being prepared for merging to mainline also uses dtc to produce device tree blobs. A few other archs have also mentioned some interest in using dtc. Therefore, this patch moves dtc and libfdt from arch/powerpc into scripts, where it can be used by any architecture. The vast bulk of this patch is a literal move, the rest is adjusting the various Makefiles to use dtc and libfdt correctly from their new locations. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'merge' of ↵Paul Mackerras2009-04-281-13/+43
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx into merge
| * powerpc/44x: Correct memory size calculation for denali-based boardsValentine Barshak2009-04-241-13/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some U-Boot versions incorrectly set the number of chipselects to two for Sequoia/Rainier boards while they only have one chipselect hardwired. This patch adds a workaround for this, hardcoding the number of chipselects to one for sequioa/rainer board models and reading the actual value from the memory controller register DDR0_10 otherwise. It also fixes another error in the way ibm4xx_denali_fixup_memsize calculates memory size. When testing the DDR_REDUC bit, the polarity is backwards. A "1" implies 32-bit wide memory while a "0" implies 64-bit wide memory. Signed-off-by: Mikhail Zolotaryov <lebon@lebon.org.ua> Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Steven A. Falco <sfalco@harris.com> Acked-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
* | powerpc/86xx: Add device_type entry to soc for ppc9aMartyn Welch2009-04-271-0/+1
|/ | | | | | | | The 'device_type = "soc";' line *is* needed in the DTS for get_immrbase() to return the correct address. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6 into mergePaul Mackerras2009-04-224-8/+53
|\
| * powerpc/5200: Add FLASH nodes to lite5200 device treeGrant Likely2009-04-161-0/+39
| | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * Merge branch 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds2009-04-071-4/+4
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'i2c-for-2630-v2' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c: imx: Make disable_delay a per-device variable i2c: xtensa s6000 i2c driver powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates board i2c: i2c-mpc: make I2C bus speed configurable i2c: i2c-mpc: use dev based printout function i2c: i2c-mpc: various coding style fixes i2c: imx: Add missing request_mem_region in probe() i2c: i2c-s3c2410: Initialise Samsung I2C controller early i2c-s3c2410: Simplify bus frequency calculation i2c-s3c2410: sda_delay should be in ns, not clock ticks i2c: iMX/MXC support
| | * powerpc/85xx: i2c-mpc: use new I2C bindings for the Socates boardWolfgang Grandegger2009-04-071-4/+4
| | | | | | | | | | | | | | | | | | | | | Preserve I2C clock settings for the Socrates MPC8544 board. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
| * | Merge branch 'merge' of ↵Linus Torvalds2009-04-0710-22/+31
| |\ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (28 commits) powerpc: Fix oops when loading modules powerpc: Wire up preadv and pwritev powerpc/ftrace: Fix printf format warning powerpc/ftrace: Fix #if that should be #ifdef powerpc: Fix ptrace compat wrapper for FPU register access powerpc: Print information about mapping hw irqs to virtual irqs powerpc: Correct dependency of KEXEC powerpc: Disable VSX or current process in giveup_fpu/altivec powerpc/pseries: Enable relay in pseries_defconfig powerpc/pseries: Fix ibm,client-architecture comment powerpc/pseries: Scan for all events in rtasd powerpc/pseries: Add dispatch dispersion statistics powerpc: Clean up some prom printouts powerpc: Print progress of ibm,client-architecture method powerpc: Remove duplicated #include's powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook powerpc/wdrtas: Update wdrtas_get_interval to use rtas_data_buf fsl-diu-fb: Pass the proper device for dma mapping routines powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot. cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console. ...
| * | Merge git://git.infradead.org/mtd-2.6Linus Torvalds2009-04-062-4/+10
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.infradead.org/mtd-2.6: (53 commits) [MTD] struct device - replace bus_id with dev_name(), dev_set_name() [MTD] [NOR] Fixup for Numonyx M29W128 chips [MTD] mtdpart: Make ecc_stats more realistic. powerpc/85xx: TQM8548: Update DTS file for multi-chip support powerpc: NAND: FSL UPM: document new bindings [MTD] [NAND] FSL-UPM: Add wait flags to support board/chip specific delays [MTD] [NAND] FSL-UPM: add multi chip support [MTD] [NOR] Add device parent info to physmap_of [MTD] [NAND] Add support for NAND on the Socrates board [MTD] [NAND] Add support for 4KiB pages. [MTD] sysfs support should not depend on CONFIG_PROC_FS [MTD] [NAND] Add parent info for CAFÉ controller [MTD] support driver model updates [MTD] driver model updates (part 2) [MTD] driver model updates [MTD] [NAND] move gen_nand's probe function to .devinit.text [MTD] [MAPS] move sa1100 flash's probe function to .devinit.text [MTD] fix use after free in register_mtd_blktrans [MTD] [MAPS] Drop now unused sharpsl-flash map [MTD] ofpart: Check name property to determine partition nodes. ... Manually fix trivial conflict in drivers/mtd/maps/Makefile
| | * | powerpc/85xx: TQM8548: Update DTS file for multi-chip supportWolfgang Grandegger2009-04-062-4/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds multi-chip support for the Micron MT29F8G08FAB NAND flash memory on the TQM8548 modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | | | powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3Wolfgang Grandegger2009-04-072-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For enet2 and enet3 the wrong phy-handles have been used in DTS files of the TQM8548 modules. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodesWolfgang Grandegger2009-04-076-12/+12
| |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | Commit 0f73a449a649acfca91404a98a35353a618b9555 added I2C device nodes for the LM75 thermal sensor on the TQM85xx modules, unfortunately with the wrong I2C address. The LM75s are located at address 0x48. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | Merge branch 'next' of ↵Paul Mackerras2009-04-0710-22/+31
|\ \ \ | |/ / |/| | | | | master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge
| * | powerpc/pq2fads: Update device tree for use with device-tree-aware u-boot.Scott Wood2009-04-061-6/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add aliases, and correct CS0 offset to match how u-boot programs it (this was not a problem with cuImage because the wrapper would reprogram the localbus to match the device tree). Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Re-add the device_type soc to socrates.dtsWolfgang Grandegger2009-04-021-0/+1
| | | | | | | | | | | | | | | | | | | | | The device_type "soc" is still required for MPC85xx boards. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: Use fsl,mpc85.. as prefix for memory ctrl & l2-cache nodesKumar Gala2009-03-318-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | Older devices tree's used "fsl,85.." instead of the preferred "fsl,mpc85.." for the memory controller & l2 cache controller nodes. The EDAC code is the only use of these and has been updated for some time to support both "fsl,85.." and "fsl,mpc85.." Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | powerpc/83xx: add mmc-spi support via the device tree for MPC8323E-RDBAnton Vorontsov2009-04-011-0/+24
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add gpio-controller node to manage QE GPIO Bank D; - Add mmc-spi node; - Modify board file so that it won't use legacy SPI support with the new device trees. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge commit 'origin/master' into nextBenjamin Herrenschmidt2009-03-302-0/+14
|\ \ | | | | | | | | | | | | | | | Manual merge of: arch/powerpc/include/asm/elf.h drivers/i2c/busses/i2c-mpc.c
| * | crypto: amcc - Add crypt4xx driverJames Hsiao2009-02-182-0/+14
| |/ | | | | | | | | | | | | | | | | | | | | This patch adds support for AMCC ppc4xx security device driver. This is the initial release that includes the driver framework with AES and SHA1 algorithms support. The remaining algorithms will be released in the near future. Signed-off-by: James Hsiao <jhsiao@amcc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
* | powerpc/85xx: Add support for the "socrates" board (MPC8544).Wolfgang Grandegger2009-03-271-0/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supported are Ethernet, serial console, I2C, I2C-based RTC and temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime display controller. The multiplexing of FPGA interrupts onto PowerPC interrupt lines is supported through our own fpga_pic interrupt controller driver. For example the SJA1000 controller is level low sensitive connected to fpga_pic line 2 and is routed to the second (of three) irq lines to the CPU: can@3,100 { compatible = "philips,sja1000"; reg = <3 0x100 0x80>; interrupts = <2 2>; interrupts = <2 8 1>; // number, type, routing interrupt-parent = <&fpga_pic>; }; Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: Yuri Tikhonov <yur@emcraft.com> Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Dmitry Rakhchev <rda@emcraft.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/83xx: Update ranges in gianfar node to match other dtsKumar Gala2009-03-241-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The gianfar@25000 node was missing its ranges prop for the mdio bus and provided an explicit ranges property on gianfar@24000 to match change from commit: commit 70b3adbba056f5d9081f1ec9b4a629e3c7502072 Author: Anton Vorontsov <avorontsov@ru.mvista.com> Date: Thu Mar 19 21:01:45 2009 +0300 powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/86xx: Move gianfar mdio nodes under the ethernet nodesAnton Vorontsov2009-03-245-199/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/85xx: Move gianfar mdio nodes under the ethernet nodesAnton Vorontsov2009-03-2421-1016/+1173
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/83xx: Move gianfar mdio nodes under the ethernet nodesAnton Vorontsov2009-03-2412-393/+482
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | powerpc/83xx: Add power management support for MPC837x boardsAnton Vorontsov2009-03-246-171/+323
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds pmc nodes to the device tree files so that the boards will able to use standby capability of MPC837x processors. The MPC837x PMC controllers are compatible with MPC8349 ones (i.e. no deep sleep). sleep = <> properties are used to specify SCCR masks as described in "Specifying Device Power Management Information (sleep property)" chapter in Documentation/powerpc/booting-without-of.txt. Since I2C1 and eSDHC controllers share the same clock source, they are now placed under sleep-nexus nodes. A processor is able to wakeup the boards on LAN events (Wake-On-Lan), console events (with no_console_suspend kernel command line), GPIO events and external IRQs (IRQ1 and IRQ2). The processor can also wakeup the boards by the fourth general purpose timer in GTM1 block, but the GTM wakeup support isn't yet implemented (it's tested to work, but it's unclear how can we use the quite short GTM timers, and how do we want to expose the GTM to userspace). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Merge commit 'gcl/next' into nextBenjamin Herrenschmidt2009-03-202-2/+394
|\ \