aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* of/device: Replace of_device with platform_device in includes and core codeGrant Likely2010-07-241-1/+1
| | | | | | | | | of_device is currently just an #define alias to platform_device until it gets removed entirely. This patch removes references to it from the include directories and the core drivers/of code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
* of: remove asm/of_device.hGrant Likely2010-07-241-3/+0
| | | | | | | | | | It is mostly unused now. Sparc has a few defines left in it, but they can be moved to other headers. Removing this header means that new architectures adding CONFIG_OF support don't need to also add this header file. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
* of: remove asm/of_platform.hGrant Likely2010-07-242-16/+2
| | | | | | | | Only thing left in it is of_instantiate_rtc() which can be moved to asm/prom.h on PowerPC and is unused in microblaze. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
* of/platform: remove all of_bus_type and of_platform_bus_type referencesGrant Likely2010-07-241-2/+1
| | | | | | | | | | | | | | | Both of_bus_type and of_platform_bus_type are just #define aliases for the platform bus. This patch removes all references to them and switches to the of_register_platform_driver()/of_unregister_platform_driver() API for registering. Subsequent patches will convert each user of of_register_platform_driver() into plain platform_drivers without the of_platform_driver shim. At which point the of_register_platform_driver()/of_unregister_platform_driver() functions can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
* of: Merge of_platform_bus_type with platform_bus_typeGrant Likely2010-07-246-35/+3
| | | | | | | | | | | | | | | | | | | | of_platform_bus was being used in the same manner as the platform_bus. The only difference being that of_platform_bus devices are generated from data in the device tree, and platform_bus devices are usually statically allocated in platform code. Having them separate causes the problem of device drivers having to be registered twice if it was possible for the same device to appear on either bus. This patch removes of_platform_bus_type and registers all of_platform bus devices and drivers on the platform bus instead. A previous patch made the of_device structure an alias for the platform_device structure, and a shim is used to adapt of_platform_drivers to the platform bus. After all of of_platform_bus drivers are converted to be normal platform drivers, the shim code can be removed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net>
* Merge commit 'v2.6.35-rc6' into devicetree/nextGrant Likely2010-07-24131-831/+581
|\ | | | | | | | | Conflicts: arch/sparc/kernel/prom_64.c
| * Merge branch 'lmb-to-memblock' of ↵Linus Torvalds2010-07-1446-264/+264
| |\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'lmb-to-memblock' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: lmb: rename to memblock
| | * lmb: rename to memblockYinghai Lu2010-07-1446-264/+264
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | via following scripts FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/lmb/memblock/g' \ -e 's/LMB/MEMBLOCK/g' \ $FILES for N in $(find . -name lmb.[ch]); do M=$(echo $N | sed 's/lmb/memblock/g') mv $N $M done and remove some wrong change like lmbench and dlmb etc. also move memblock.c from lib/ to mm/ Suggested-by: Ingo Molnar <mingo@elte.hu> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/fsl-booke: Fix address issue when using relocatable kernelsMatthew McClintock2010-07-111-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When booting a relocatable kernel it needs to jump to the correct start address, which for BookE parts is usually unchanged regardless of the physical memory offset. Recent changes cause problems with how we calculate the start address, it was always adding the RMO into the start address which is incorrect. This patch only adds in the RMO offset if we are in the kexec code path, as it needs the RMO to work correctly. Instead of adding the RMO offset in in the common code path, we can just set r6 to the RMO offset in the kexec code path instead of to zero, and finally perform the masking in the common code path Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/cpm1: Mark micropatch code/data static and __initAnton Vorontsov2010-07-112-10/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This saves runtime memory and fixes lots of sparse warnings like this: CHECK arch/powerpc/sysdev/micropatch.c arch/powerpc/sysdev/micropatch.c:27:6: warning: symbol 'patch_2000' was not declared. Should it be static? arch/powerpc/sysdev/micropatch.c:146:6: warning: symbol 'patch_2f00' was not declared. Should it be static? ... Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/cpm1: Fix build with various CONFIG_*_UCODE_PATCH combinationsAnton Vorontsov2010-07-111-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Warnings are treated as errors for arch/powerpc code, so build fails with CONFIG_I2C_SPI_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:630: warning: unused variable 'smp' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 And with CONFIG_USB_SOF_UCODE_PATCH=y: CC arch/powerpc/sysdev/micropatch.o cc1: warnings being treated as errors arch/powerpc/sysdev/micropatch.c: In function 'cpm_load_patch': arch/powerpc/sysdev/micropatch.c:629: warning: unused variable 'spp' arch/powerpc/sysdev/micropatch.c:628: warning: unused variable 'iip' make[1]: *** [arch/powerpc/sysdev/micropatch.o] Error 1 This patch fixes these issues by introducing proper #ifdefs. Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/cpm: Reintroduce global spi_pram struct (fixes build issue)Anton Vorontsov2010-07-112-3/+28
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | spi_t was removed in commit 644b2a680ccc51a9ec4d6beb12e9d47d2dee98e2 ("powerpc/cpm: Remove SPI defines and spi structs"), the commit assumed that spi_t isn't used anywhere outside of the spi_mpc8xxx driver. But it appears that the struct is needed for micropatch code. So, let's reintroduce the struct. Fixes the following build issue: CC arch/powerpc/sysdev/micropatch.o micropatch.c: In function 'cpm_load_patch': micropatch.c:629: error: expected '=', ',', ';', 'asm' or '__attribute__' before '*' token micropatch.c:629: error: 'spp' undeclared (first use in this function) micropatch.c:629: error: (Each undeclared identifier is reported only once micropatch.c:629: error: for each function it appears in.) Reported-by: LEROY Christophe <christophe.leroy@c-s.fr> Reported-by: Tony Breeds <tony@bakeyournoodle.com> Cc: <stable@kernel.org> [ .33, .34 ] Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc: Fix userspace build of ptrace.hSam Ravnborg2010-07-081-18/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Build of ptrace.h failed for assembly because it pulls in stdint.h. Use exportable types (__u32, __u64) to avoid the dependency on stdint.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Andrey Volkov <avolkov@varma-el.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Fix default_machine_crash_shutdown #ifdef botchPaul E. McKenney2010-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | crash_kexec_wait_realmode() is defined only if CONFIG_PPC_STD_MMU_64 and CONFIG_SMP, but is called if CONFIG_PPC_STD_MMU_64 even if !CONFIG_SMP. Fix the conditional compilation around the invocation. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Fix logic error in fixup_irqsJohannes Berg2010-07-081-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When SPARSE_IRQ is set, irq_to_desc() can return NULL. While the code here has a check for NULL, it's not really correct. Fix it by separating the check for it. This fixes CPU hot unplug for me. Reported-by: Alastair Bridgewater <alastair.bridgewater@gmail.com> Cc: stable@kernel.org [2.6.32+] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/iseries: Fix possible null pointer dereference in ↵Denis Kirjanov2010-07-081-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | iSeries_pcibios_fixup_resources I don't know if this is a right fix for the problem since of_get_property can return NULL. Since iseries_device_information is used only for informational purpose, we can skip this function without valid HvSubBusNumber number. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Linux cannot run with 0 coresAnton Blanchard2010-07-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | If we configure with CONFIG_SMP=n or set NR_CPUS less than the number of SMT threads we will set the max cores property to 0 in the ibm,client-architecture-support structure. On new versions of firmware that understand this property it obliges and terminates our partition. Use DIV_ROUND_UP so we handle not only the CONFIG_SMP=n case but also the case where NR_CPUS isn't a multiple of the number of SMT threads. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Fix feature-fixup tests for gcc 4.5Stephen Rothwell2010-07-081-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The feature-fixup test declare some extern void variables and then take their addresses. Fix this by declaring them as extern u8 instead. Fixes these warnings (treated as errors): CC arch/powerpc/lib/feature-fixups.o cc1: warnings being treated as errors arch/powerpc/lib/feature-fixups.c: In function 'test_cpu_macros': arch/powerpc/lib/feature-fixups.c:293:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:294:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:297:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:297:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c: In function 'test_fw_macros': arch/powerpc/lib/feature-fixups.c:306:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:307:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:310:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:310:2: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c: In function 'test_lwsync_macros': arch/powerpc/lib/feature-fixups.c:321:23: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:322:9: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:326:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:326:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:329:3: error: taking address of expression of type 'void' arch/powerpc/lib/feature-fixups.c:329:3: error: taking address of expression of type 'void' Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Disable SPARSE_IRQ by defaultYang Li2010-07-081-2/+2
| | | | | | | | | | | | | | | | | | The SPARSE_IRQ considerably adds overhead to critical path of IRQ handling. However it doesn't benefit much in space for most systems with limited IRQ_NR. Should be disabled unless really necessary. Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Fix compile errors in prom_init_check for gcc 4.5Stephen Rothwell2010-07-081-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just whitelist these extra compiler generated symbols. Fixes these errors: Error: External symbol '_restgpr0_14' referenced from prom_init.c Error: External symbol '_restgpr0_20' referenced from prom_init.c Error: External symbol '_restgpr0_22' referenced from prom_init.c Error: External symbol '_restgpr0_24' referenced from prom_init.c Error: External symbol '_restgpr0_25' referenced from prom_init.c Error: External symbol '_restgpr0_26' referenced from prom_init.c Error: External symbol '_restgpr0_27' referenced from prom_init.c Error: External symbol '_restgpr0_28' referenced from prom_init.c Error: External symbol '_restgpr0_29' referenced from prom_init.c Error: External symbol '_restgpr0_31' referenced from prom_init.c Error: External symbol '_savegpr0_14' referenced from prom_init.c Error: External symbol '_savegpr0_20' referenced from prom_init.c Error: External symbol '_savegpr0_22' referenced from prom_init.c Error: External symbol '_savegpr0_24' referenced from prom_init.c Error: External symbol '_savegpr0_25' referenced from prom_init.c Error: External symbol '_savegpr0_26' referenced from prom_init.c Error: External symbol '_savegpr0_27' referenced from prom_init.c Error: External symbol '_savegpr0_28' referenced from prom_init.c Error: External symbol '_savegpr0_29' referenced from prom_init.c Error: External symbol '_savegpr0_31' referenced from prom_init.c Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc: Fix module building for gcc 4.5 and 64 bitStephen Rothwell2010-07-083-4/+133
| | | | | | | | | | | | | | | | Gcc 4.5 is now generating out of line register save and restore in the function prefix and postfix when we use -Os. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * powerpc/perf_event: Fix for power_pmu_disable()Matt Evans2010-07-081-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When power_pmu_disable() removes the given event from a particular index into cpuhw->event[], it shuffles down higher event[] entries. But, this array is paired with cpuhw->events[] and cpuhw->flags[] so should shuffle them similarly. If these arrays get out of sync, code such as power_check_constraints() will fail. This caused a bug where events were temporarily disabled and then failed to be re-enabled; subsequent code tried to write_pmc() with its (disabled) idx of 0, causing a message "oops trying to write PMC0". This triggers this bug on POWER7, running a miss-heavy test: perf record -e L1-dcache-load-misses -e L1-dcache-store-misses ./misstest Signed-off-by: Matt Evans <matt@ozlabs.org> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2010-06-273-3/+41
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: fix lite5200 ethernet phy address powerpc/5200: Fix build error in sound code. powerpc/5200: fix oops during going to standby powerpc/5200: add lite5200 onboard I2C eeprom and flash maintainers: Add git trees for SPI and device tree of: Drop properties with "/" in their name
| * | powerpc: Fix mpic_resume on early G5 macsAlastair Bridgewater2010-06-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mpic_resume() on G5 macs blindly dereferences mpic->fixups, but it may legitimately be NULL (as on PowerMac7,2). Add an explicit check. This fixes suspend-to-disk with one processor (maxcpus=1) for me. Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: rtas_flash needs to use rtas_data_bufMilton Miller2010-06-151-18/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to flash a machine via the update_flash command, Anton received the following error: Restarting system. FLASH: kernel bug...flash list header addr above 4GB The code in question has a comment that the flash list should be in the kernel data and therefore under 4GB: /* NOTE: the "first" block list is a global var with no data * blocks in the kernel data segment. We do this because * we want to ensure this block_list addr is under 4GB. */ Unfortunately the Kconfig option is marked tristate which means the variable may not be in the kernel data and could be above 4GB. Instead of relying on the data segment being below 4GB, use the static data buffer allocated by the kernel for use by rtas. Since we don't use the header struct directly anymore, convert it to a simple pointer. Reported-By: Anton Blanchard <anton@samba.org> Signed-Off-By: Milton Miller <miltonm@bga.com Tested-By: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Unconditionally enabled irq stacksChristoph Hellwig2010-06-158-42/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Irq stacks provide an essential protection from stack overflows through external interrupts, at the cost of two additionals stacks per CPU. Enable them unconditionally to simplify the kernel build and prevent people from accidentally disabling them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/kexec: Wait for online/possible CPUs only.Matt Evans2010-06-151-17/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | kexec_perpare_cpus_wait() iterates i through NR_CPUS to check paca[i].kexec_state of each to make sure they have quiesced. However now we have dynamic PACA allocation, paca[NR_CPUS] is not necessarily valid and we overrun the array; spurious "cpu is not possible, ignoring" errors result. This patch iterates for_each_online_cpu so stays within the bounds of paca[] -- and every CPU is now 'possible'. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Disable CONFIG_SYSFS_DEPRECATEDGrant Likely2010-06-1560-119/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Acked-by: Grant Likely <grant.likely@secretlab.ca> On 5 May 2010 21:33, "Anton Blanchard" <anton@samba.org> wrote: CONFIG_SYSFS_DEPRECATED can cause issues with newer distros and should not be required for any distro in the last 3 or 4 years, so disable it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc/boot: Remove addRamdisk.c since it is now unusedPaul Mackerras2010-06-152-312/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | It was used in the dim distant past for adding initrds to images for legacy iSeries, but it's not even used for that now that we have initramfs. So remove it. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Move kdump default base address to 64MB on 64bitAnton Blanchard2010-06-151-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are seeing boot fails on some System p machines when using the kdump crashkernel= boot option. The default kdump base address is 32MB, so if we reserve 256MB for kdump then we reserve all of the RMO except the first 32MB. We really want kdump to reserve some memory in the RMO and most of it elsewhere but that will require more significant changes. For now we can shift the default base address to 64MB when CONFIG_PPC64 and CONFIG_RELOCATABLE are set. This isn't quite correct since what we really care about is the kdump kernel is relocatable, but we already make the assumption that base kernel and kdump kernel have the same CONFIG_RELOCATABLE setting, eg: #ifndef CONFIG_RELOCATABLE if (crashk_res.start != KDUMP_KERNELBASE) printk("Crash kernel location must be 0x%x\n", KDUMP_KERNELBASE); ... RTAS is instantiated towards the top of our RMO, so if we were to go any higher we risk not having enough RMO memory for the kdump kernel on boxes with a 128MB RMO. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | powerpc: Remove dead CONFIG_HIGHPTEChristoph Egger2010-06-151-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_HIGHPTE doesn't exist in Kconfig, therefore removing all references for it from the source code. Signed-off-by: Christoph Egger <siccegge@cs.fau.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | of: Remove unused of_find_device_by_phandle()Grant Likely2010-07-182-21/+0
| | | | | | | | | | | | | | | Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | proc: unify PROC_DEVICETREE configAndres Salomon2010-07-051-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Microblaze and PPC both use PROC_DEVICETREE, and OLPC will as well.. put the Kconfig option into fs/ rather than in arch/*/Kconfig. Signed-off-by: Andres Salomon <dilinger@queued.net> [grant.likely@secretlab.ca: changed depends to PROC_FS && !SPARC] [grant.likely@secretlab.ca: moved to drivers/of/Kconfig] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | of: Put all CONFIG_OF dependencies into a Kconfig menu blockGrant Likely2010-07-051-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All of the options in drivers/of/Kconfig depend on CONFIG_OF. Putting all of them inside a menu block simplifies the dependency statements. It also creates a logical group for adding user selectable OF options. This patch also changes (PPC_OF || MICROBLAZE) statements to (!SPARC) so that those options are available to other architectures (and in fact the !SPARC conditions should probably be re-evalutated since the code is more generic now) This patch also moves the definition of CONFIG_DTC from arch/* to drivers/of/Kconfig Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | of: remove architecture CONFIG_OF definitionsStephen Rothwell2010-07-051-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | now that CONFIG_OF is defined globally Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | powerpc: turn CONFIG_OF into a selectStephen Rothwell2010-07-051-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | so that we can make CONFIG_OF global and remove it from the architecture Kconfig files later. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | of: refactor of_modalias_node() and remove explicit match table.Grant Likely2010-07-051-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch tightens up the behaviour of of_modalias_node() to be more predicatable and to eliminate the explicit of_modalias_tablep[] that is currently used to override the first entry in the compatible list of a device. The override table was needed originally because spi and i2c drivers had no way to do of-style matching. Now that all devices can have an of_node pointer, and all drivers can have an of_match_table, the explicit override table is no longer needed because each driver can specify its own OF-style match data. The mpc8349emitx-mcu driver is modified to explicitly specify the correct device to bind against. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | of/gpio: add default of_xlate function if device has a node pointerAnton Vorontsov2010-07-059-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement generic OF gpio hooks and thus make device-enabled GPIO chips (i.e. the ones that have gpio_chip->dev specified) automatically attach to the OpenFirmware subsystem. Which means that now we can handle I2C and SPI GPIO chips almost* transparently. * "Almost" because some chips still require platform data, and for these chips OF-glue is still needed, though with this change the glue will be much smaller. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@linux-foundation.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
* | | of/gpio: stop using device_node data pointer to find gpio_chipGrant Likely2010-07-053-21/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the kernel uses the struct device_node.data pointer to resolve a struct gpio_chip pointer from a device tree node. However, the .data member doesn't provide any type checking and there aren't any rules enforced on what it should be used for. There's no guarantee that the data stored in it actually points to an gpio_chip pointer. Instead of relying on the .data pointer, this patch modifies the code to add a lookup function which scans through the registered gpio_chips and returns the gpio_chip that has a pointer to the specified device_node. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Andrew Morton <akpm@linux-foundation.org> CC: Anton Vorontsov <avorontsov@ru.mvista.com> CC: Grant Likely <grant.likely@secretlab.ca> CC: David Brownell <dbrownell@users.sourceforge.net> CC: Bill Gatliff <bgat@billgatliff.com> CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Jean Delvare <khali@linux-fr.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
* | | of/gpio: Kill of_gpio_chip and add members directly to gpio_chipAnton Vorontsov2010-07-0510-93/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OF gpio infrastructure is great for describing GPIO connections within the device tree. However, using a GPIO binding still requires changes to the gpio controller just to add an of_gpio structure. In most cases, the gpio controller doesn't actually need any special support and the simple OF gpio mapping function is more than sufficient. Additional, the current scheme of using of_gpio_chip requires a convoluted scheme to maintain 1:1 mappings between of_gpio_chip and gpio_chip instances. If the struct of_gpio_chip data members were moved into struct gpio_chip, then it would simplify the processing of OF gpio bindings, and it would make it trivial to use device tree OF connections on existing gpiolib controller drivers. This patch eliminates the of_gpio_chip structure and moves the relevant fields into struct gpio_chip (conditional on CONFIG_OF_GPIO). This move simplifies the existing code and prepares for adding automatic device tree support to existing drivers. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org>
* | | of: Merge of_device_alloc() and of_device_make_bus_id()Grant Likely2010-07-053-95/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch merges the common routines of_device_alloc() and of_device_make_bus_id() from powerpc and microblaze. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Grant Likely <grant.likely@secretlab.ca> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org CC: devicetree-discuss@lists.ozlabs.org
* | | of/device: Merge of_platform_bus_probe()Grant Likely2010-07-052-141/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge common code between PowerPC and microblaze. This patch merges the code that scans the tree and registers devices. The functions merged are of_platform_bus_probe(), of_platform_bus_create(), and of_platform_device_create(). This patch also move the of_default_bus_ids[] table out of a Microblaze header file and makes it non-static. The device ids table isn't merged because powerpc and microblaze use different default data. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Grant Likely <grant.likely@secretlab.ca> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org
* | | of/device: merge of_device_ueventGrant Likely2010-07-052-52/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge common code between powerpc and microblaze Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org
* | | of/address: Merge all of the bus translation codeGrant Likely2010-07-052-519/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>
* | | of/address: merge of_address_to_resource()Grant Likely2010-07-053-59/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
* | | of/address: merge of_iomap()Grant Likely2010-07-052-20/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
* | | of/irq: merge irq mapping codeGrant Likely2010-07-052-313/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge common irq mapping code between PowerPC and Microblaze. This patch merges of_irq_find_parent(), of_irq_map_raw() and of_irq_map_one(). The functions are dependent on one another, so all three are merged in a single patch. Other than cosmetic difference (ie. DBG() vs. pr_debug()), the implementations are identical. of_irq_to_resource() is also merged, but in this case the implementations are different. This patch drops the microblaze version and uses the powerpc implementation unchanged. The microblaze version essentially open-coded irq_of_parse_and_map() which it does not need to do. Therefore the powerpc version is safe to adopt. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au>
* | | of/powerpc: Move Powermac irq quirk code into powermac pic driver codeGrant Likely2010-07-053-100/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code that figures out what is wrong with the powermac irq device tree data belongs with the rest of the powermac irq code. This patch moves it out of prom_parse.c and into powermac/pic.c so that it is only compiled in when actually needed. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
* | | of/irq: Move irq_of_parse_and_map() to common codeGrant Likely2010-06-283-66/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
* | | of: kill struct of_deviceGrant Likely2010-06-282-13/+2
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the device tree node pointer has been moved out of struct of_device and into the common struct device, there isn't anything unique about of_device anymore. In fact, there isn't much need for a separate of_bus when all busses have access to OF style probing. arch/powerpc and arch/microblaze are moving away from using the of_bus and using the regular platform bus instead for mmio devices. This patch makes of_device the same as platform_device as a stepping stone in migrating of_platform_drivers over to the platform bus. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: David S. Miller <davem@davemloft.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
generated by cgit v1.1 at 2025-07-02 18:31:40 +0000