aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel
Commit message (Collapse)AuthorAgeFilesLines
* x86, amd: Disable way access filter on Piledriver CPUsAndre Przywara2013-01-111-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2bbf0a1427c377350f001fbc6260995334739ad7 upstream. The Way Access Filter in recent AMD CPUs may hurt the performance of some workloads, caused by aliasing issues in the L1 cache. This patch disables it on the affected CPUs. The issue is similar to that one of last year: http://lkml.indiana.edu/hypermail/linux/kernel/1107.3/00041.html This new patch does not replace the old one, we just need another quirk for newer CPUs. The performance penalty without the patch depends on the circumstances, but is a bit less than the last year's 3%. The workloads affected would be those that access code from the same physical page under different virtual addresses, so different processes using the same libraries with ASLR or multiple instances of PIE-binaries. The code needs to be accessed simultaneously from both cores of the same compute unit. More details can be found here: http://developer.amd.com/Assets/SharedL1InstructionCacheonAMD15hCPU.pdf CPUs affected are anything with the core known as Piledriver. That includes the new parts of the AMD A-Series (aka Trinity) and the just released new CPUs of the FX-Series (aka Vishera). The model numbering is a bit odd here: FX CPUs have model 2, A-Series has model 10h, with possible extensions to 1Fh. Hence the range of model ids. Signed-off-by: Andre Przywara <osp@andrep.de> Link: http://lkml.kernel.org/r/1351700450-9277-1-git-send-email-osp@andrep.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: CAI Qian <caiqian@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86: hpet: Fix masking of MSI interruptsJan Beulich2012-12-171-2/+2
| | | | | | | | | | | | | | commit 6acf5a8c931da9d26c8dd77d784daaf07fa2bff0 upstream. HPET_TN_FSB is not a proper mask bit; it merely toggles between MSI and legacy interrupt delivery. The proper mask bit is HPET_TN_ENABLE, so use both bits when (un)masking the interrupt. Signed-off-by: Jan Beulich <jbeulich@suse.com> Link: http://lkml.kernel.org/r/5093E09002000078000A60E6@nat28.tlf.novell.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86-32: Export kernel_stack_pointer() for modulesH. Peter Anvin2012-12-051-0/+2
| | | | | | | | | | | | | | | | | | commit cb57a2b4cff7edf2a4e32c0163200e9434807e0a upstream. Modules, in particular oprofile (and possibly other similar tools) need kernel_stack_pointer(), so export it using EXPORT_SYMBOL_GPL(). Cc: Yang Wei <wei.yang@windriver.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Jun Zhang <jun.zhang@intel.com> Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Robert Richter <rric@kernel.org> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Philip Müller <philm@manjaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, mce, therm_throt: Don't report power limit and package level thermal ↵Fenghua Yu2012-12-031-22/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | throttle events in mcelog commit 29e9bf1841e4f9df13b4992a716fece7087dd237 upstream. Thermal throttle and power limit events are not defined as MCE errors in x86 architecture and should not generate MCE errors in mcelog. Current kernel generates fake software defined MCE errors for these events. This may confuse users because they may think the machine has real MCE errors while actually only thermal throttle or power limit events happen. To make it worse, buggy firmware on some platforms may falsely generate the events. Therefore, kernel reports MCE errors which users think as real hardware errors. Although the firmware bugs should be fixed, on the other hand, kernel should not report MCE errors either. So mcelog is not a good mechanism to report these events. To report the events, we count them in respective counters (core_power_limit_count, package_power_limit_count, core_throttle_count, and package_throttle_count) in /sys/devices/system/cpu/cpu#/thermal_throttle/. Users can check the counters for each event on each CPU. Please note that all CPU's on one package report duplicate counters. It's user application's responsibity to retrieve a package level counter for one package. This patch doesn't report package level power limit, core level power limit, and package level thermal throttle events in mcelog. When the events happen, only report them in respective counters in sysfs. Since core level thermal throttle has been legacy code in kernel for a while and users accepted it as MCE error in mcelog, core level thermal throttle is still reported in mcelog. In the mean time, the event is counted in a counter in sysfs as well. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Borislav Petkov <bp@amd64.org> Acked-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20111215001945.GA21009@linux-os.sc.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: maximilian attems <max@stro.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, microcode, AMD: Add support for family 16h processorsBoris Ostrovsky2012-12-031-0/+4
| | | | | | | | | | | | | | | commit 36c46ca4f322a7bf89aad5462a3a1f61713edce7 upstream. Add valid patch size for family 16h processors. [ hpa: promoting to urgent/stable since it is hw enabling and trivial ] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> Acked-by: Andreas Herrmann <herrmann.der.user@googlemail.com> Link: http://lkml.kernel.org/r/1353004910-2204-1-git-send-email-boris.ostrovsky@amd.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86-32: Fix invalid stack address while in softirqRobert Richter2012-12-031-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1022623842cb72ee4d0dbf02f6937f38c92c3f41 upstream. In 32 bit the stack address provided by kernel_stack_pointer() may point to an invalid range causing NULL pointer access or page faults while in NMI (see trace below). This happens if called in softirq context and if the stack is empty. The address at &regs->sp is then out of range. Fixing this by checking if regs and &regs->sp are in the same stack context. Otherwise return the previous stack pointer stored in struct thread_info. If that address is invalid too, return address of regs. BUG: unable to handle kernel NULL pointer dereference at 0000000a IP: [<c1004237>] print_context_stack+0x6e/0x8d *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 4434, comm: perl Not tainted 3.6.0-rc3-oprofile-i386-standard-g4411a05 #4 Hewlett-Packard HP xw9400 Workstation/0A1Ch EIP: 0060:[<c1004237>] EFLAGS: 00010093 CPU: 0 EIP is at print_context_stack+0x6e/0x8d EAX: ffffe000 EBX: 0000000a ECX: f4435f94 EDX: 0000000a ESI: f4435f94 EDI: f4435f94 EBP: f5409ec0 ESP: f5409ea0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000000a CR3: 34ac9000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process perl (pid: 4434, ti=f5408000 task=f5637850 task.ti=f4434000) Stack: 000003e8 ffffe000 00001ffc f4e39b00 00000000 0000000a f4435f94 c155198c f5409ef0 c1003723 c155198c f5409f04 00000000 f5409edc 00000000 00000000 f5409ee8 f4435f94 f5409fc4 00000001 f5409f1c c12dce1c 00000000 c155198c Call Trace: [<c1003723>] dump_trace+0x7b/0xa1 [<c12dce1c>] x86_backtrace+0x40/0x88 [<c12db712>] ? oprofile_add_sample+0x56/0x84 [<c12db731>] oprofile_add_sample+0x75/0x84 [<c12ddb5b>] op_amd_check_ctrs+0x46/0x260 [<c12dd40d>] profile_exceptions_notify+0x23/0x4c [<c1395034>] nmi_handle+0x31/0x4a [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c13950ed>] do_nmi+0xa0/0x2ff [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c13949e5>] nmi_stack_correct+0x28/0x2d [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c1003603>] ? do_softirq+0x4b/0x7f <IRQ> [<c102a06f>] irq_exit+0x35/0x5b [<c1018f56>] smp_apic_timer_interrupt+0x6c/0x7a [<c1394746>] apic_timer_interrupt+0x2a/0x30 Code: 89 fe eb 08 31 c9 8b 45 0c ff 55 ec 83 c3 04 83 7d 10 00 74 0c 3b 5d 10 73 26 3b 5d e4 73 0c eb 1f 3b 5d f0 76 1a 3b 5d e8 73 15 <8b> 13 89 d0 89 55 e0 e8 ad 42 03 00 85 c0 8b 55 e0 75 a6 eb cc EIP: [<c1004237>] print_context_stack+0x6e/0x8d SS:ESP 0068:f5409ea0 CR2: 000000000000000a ---[ end trace 62afee3481b00012 ]--- Kernel panic - not syncing: Fatal exception in interrupt V2: * add comments to kernel_stack_pointer() * always return a valid stack address by falling back to the address of regs Reported-by: Yang Wei <wei.yang@windriver.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Jun Zhang <jun.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facilityLen Brown2012-11-051-24/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f6365201d8a21fb347260f89d6e9b3e718d63c70 upstream. The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside default_idle() with cpu_relax() - essentially it turned off the use of HLT. This workaround was commented in the code as: "disable hlt during certain critical i/o operations" "This halt magic was a workaround for ancient floppy DMA wreckage. It should be safe to remove." H. Peter Anvin additionally adds: "To the best of my knowledge, no-hlt only existed because of flaky power distributions on 386/486 systems which were sold to run DOS. Since DOS did no power management of any kind, including HLT, the power draw was fairly uniform; when exposed to the much hhigher noise levels you got when Linux used HLT caused some of these systems to fail. They were by far in the minority even back then." Alan Cox further says: "Also for the Cyrix 5510 which tended to go castors up if a HLT occurred during a DMA cycle and on a few other boxes HLT during DMA tended to go astray. Do we care ? I doubt it. The 5510 was pretty obscure, the 5520 fixed it, the 5530 is probably the oldest still in any kind of use." So, let's finally drop this. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephen Hemminger <shemminger@vyatta.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org [ If anyone cares then alternative instruction patching could be used to replace HLT with a one-byte NOP instruction. Much simpler. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen/x86: don't corrupt %eip when returning from a signal handlerDavid Vrabel2012-10-282-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit a349e23d1cf746f8bdc603dcc61fae9ee4a695f6 upstream. In 32 bit guests, if a userspace process has %eax == -ERESTARTSYS (-512) or -ERESTARTNOINTR (-513) when it is interrupted by an event /and/ the process has a pending signal then %eip (and %eax) are corrupted when returning to the main process after handling the signal. The application may then crash with SIGSEGV or a SIGILL or it may have subtly incorrect behaviour (depending on what instruction it returned to). The occurs because handle_signal() is incorrectly thinking that there is a system call that needs to restarted so it adjusts %eip and %eax to re-execute the system call instruction (even though user space had not done a system call). If %eax == -514 (-ERESTARTNOHAND (-514) or -ERESTART_RESTARTBLOCK (-516) then handle_signal() only corrupted %eax (by setting it to -EINTR). This may cause the application to crash or have incorrect behaviour. handle_signal() assumes that regs->orig_ax >= 0 means a system call so any kernel entry point that is not for a system call must push a negative value for orig_ax. For example, for physical interrupts on bare metal the inverse of the vector is pushed and page_fault() sets regs->orig_ax to -1, overwriting the hardware provided error code. xen_hypervisor_callback() was incorrectly pushing 0 for orig_ax instead of -1. Classic Xen kernels pushed %eax which works as %eax cannot be both non-negative and -RESTARTSYS (etc.), but using -1 is consistent with other non-system call entry points and avoids some of the tests in handle_signal(). There were similar bugs in xen_failsafe_callback() of both 32 and 64-bit guests. If the fault was corrected and the normal return path was used then 0 was incorrectly pushed as the value for orig_ax. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Jan Beulich <JBeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct ↵Jacob Shin2012-10-281-2/+15
| | | | | | | | | | | | | | | | | | | | mapping. commit 1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a upstream. On systems with very large memory (1 TB in our case), BIOS may report a reserved region or a hole in the E820 map, even above the 4 GB range. Exclude these from the direct mapping. [ hpa: this should be done not just for > 4 GB but for everything above the legacy region (1 MB), at the very least. That, however, turns out to require significant restructuring. That work is well underway, but is not suitable for rc/stable. ] Signed-off-by: Jacob Shin <jacob.shin@amd.com> Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, random: Verify RDRAND functionality and allow it to be disabledH. Peter Anvin2012-10-213-0/+76
| | | | | | | | | | | | | | | | | | | commit 49d859d78c5aeb998b6936fcb5f288f78d713489 upstream. If the CPU declares that RDRAND is available, go through a guranteed reseed sequence, and make sure that it is actually working (producing data.) If it does not, disable the CPU feature flag. Allow RDRAND to be disabled on the command line (as opposed to at compile time) for a user who has special requirements with regards to random numbers. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/alternatives: Fix p6 nops on non-modular kernelsAvi Kivity2012-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | commit cb09cad44f07044d9810f18f6f9a6a6f3771f979 upstream. Probably a leftover from the early days of self-patching, p6nops are marked __initconst_or_module, which causes them to be discarded in a non-modular kernel. If something later triggers patching, it will overwrite kernel code with garbage. Reported-by: Tomas Racek <tracek@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: qemu-devel@nongnu.org Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Ben Jencks <ben@bjencks.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* MCE: Fix vm86 handling for 32bit mce handlerAndi Kleen2012-10-021-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit a129a7c84582629741e5fa6f40026efcd7a65bd4 upstream. When running on 32bit the mce handler could misinterpret vm86 mode as ring 0. This can affect whether it does recovery or not; it was possible to panic when recovery was actually possible. Fix this by always forcing vm86 to look like ring 3. [ Backport to 3.0 notes: Things changed there slightly: - move mce_get_rip() up. It fills up m->cs and m->ip values which are evaluated in mce_severity(). Therefore move it up right before the mce_severity call. This seem to be another bug in 3.0? - Place the backport (fix m->cs in V86 case) to where m->cs gets filled which is mce_get_rip() in 3.0 ] Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, microcode: Sanitize per-cpu microcode reloading interfaceBorislav Petkov2012-08-151-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c9fc3f778a6a215ace14ee556067c73982b6d40f upstream. Microcode reloading in a per-core manner is a very bad idea for both major x86 vendors. And the thing is, we have such interface with which we can end up with different microcode versions applied on different cores of an otherwise homogeneous wrt (family,model,stepping) system. So turn off the possibility of doing that per core and allow it only system-wide. This is a minimal fix which we'd like to see in stable too thus the more-or-less arbitrary decision to allow system-wide reloading only on the BSP: $ echo 1 > /sys/devices/system/cpu/cpu0/microcode/reload ... and disable the interface on the other cores: $ echo 1 > /sys/devices/system/cpu/cpu23/microcode/reload -bash: echo: write error: Invalid argument Also, allowing the reload only from one CPU (the BSP in that case) doesn't allow the reload procedure to degenerate into an O(n^2) deal when triggering reloads from all /sys/devices/system/cpu/cpuX/microcode/reload sysfs nodes simultaneously. A more generic fix will follow. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1340280437-7718-2-git-send-email-bp@amd64.org Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, microcode: microcode_core.c simple_strtoul cleanupShuah Khan2012-08-151-5/+4
| | | | | | | | | | | | | | | commit e826abd523913f63eb03b59746ffb16153c53dc4 upstream. Change reload_for_cpu() in kernel/microcode_core.c to call kstrtoul() instead of calling obsoleted simple_strtoul(). Signed-off-by: Shuah Khan <shuahkhan@gmail.com> Reviewed-by: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/1336324264.2897.9.camel@lorien2 Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, nops: Missing break resulting in incorrect selection on IntelAlan Cox2012-08-151-1/+1
| | | | | | | | | | | | | | commit d6250a3f12edb3a86db9598ffeca3de8b4a219e9 upstream. The Intel case falls through into the generic case which then changes the values. For cases like the P6 it doesn't do the right thing so this seems to be a screwup. Signed-off-by: Alan Cox <alan@linux.intel.com> Link: http://lkml.kernel.org/n/tip-lww2uirad4skzjlmrm0vru8o@git.kernel.org Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'Kevin Winchester2012-08-157-24/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 141168c36cdee3ff23d9c7700b0edc47cb65479f and commit 3f806e50981825fa56a7f1938f24c0680816be45 upstream. Several fields in struct cpuinfo_x86 were not defined for the !SMP case, likely to save space. However, those fields still have some meaning for UP, and keeping them allows some #ifdef removal from other files. The additional size of the UP kernel from this change is not significant enough to worry about keeping up the distinction: text data bss dec hex filename 4737168 506459 972040 6215667 5ed7f3 vmlinux.o.before 4737444 506459 972040 6215943 5ed907 vmlinux.o.after for a difference of 276 bytes for an example UP config. If someone wants those 276 bytes back badly then it should be implemented in a cleaner way. Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Cc: Steffen Persvold <sp@numascale.com> Link: http://lkml.kernel.org/r/1324428742-12498-1-git-send-email-kjwinchester@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI: Remove one board specific WARN when ignoring timer overridingFeng Tang2012-07-161-5/+0
| | | | | | | | | | | | | commit 7f68b4c2e158019c2ec494b5cfbd9c83b4e5b253 upstream. Current WARN msg is only for the ati_ixp4x0 board, while this function is used by mulitple platforms. So this one board specific warning is not appropriate any more. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI: Make acpi_skip_timer_override cover all source_irq==0 casesFeng Tang2012-07-161-6/+8
| | | | | | | | | | | | | | | | | | | | commit ae10ccdc3093486f8c2369d227583f9d79f628e5 upstream. Currently when acpi_skip_timer_override is set, it only cover the (source_irq == 0 && global_irq == 2) cases. While there is also platform which need use this option and its global_irq is not 2. This patch will extend acpi_skip_timer_override to cover all timer overriding cases as long as the source irq is 0. This is the first part of a fix to kernel bug bugzilla 40002: "IRQ 0 assigned to VGA" https://bugzilla.kernel.org/show_bug.cgi?id=40002 Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@o2.pl> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERMH. Peter Anvin2012-07-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | commit 4ad33411308596f2f918603509729922a1ec4411 upstream. It makes sense to label "Digital Thermal Sensor" as "DTS", but unfortunately the string "dts" was already used for "Debug Store", and /proc/cpuinfo is a user space ABI. Therefore, rename this to "dtherm". This conflict went into mainline via the hwmon tree without any x86 maintainer ack, and without any kind of hint in the subject. a4659053 x86/hwmon: fix initialization of coretemp Reported-by: Jean Delvare <khali@linux-fr.org> Link: http://lkml.kernel.org/r/4FE34BCB.5050305@linux.intel.com Cc: Jan Beulich <JBeulich@suse.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> [bwh: Backported to 3.2: drop the coretemp device table change] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI, x86: fix Dell M6600 ACPI reboot regression via DMIZhang Rui2012-07-161-0/+8
| | | | | | | | | | | | | | | commit 76eb9a30db4bc8fd172f9155247264b5f2686d7b upstream. Dell Precision M6600 is known to require PCI reboot, so add it to the reboot blacklist in pci_reboot_dmi_table[]. https://bugzilla.kernel.org/show_bug.cgi?id=42749 cc: x86@kernel.org Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overridingFeng Tang2012-07-161-0/+8
| | | | | | | | | | | | | | | | | | | commit f6b54f083cc66cf9b11d2120d8df3c2ad4e0836d upstream. This is the 2nd part of fix for kernel bugzilla 40002: "IRQ 0 assigned to VGA" https://bugzilla.kernel.org/show_bug.cgi?id=40002 The root cause is the buggy FW, whose ACPI tables assign the GSI 16 to 2 irqs 0 and 16(VGA), and the VGA is the right owner of GSI 16. So add a quirk to ignore the irq0 overriding GSI 16 for the FUJITSU SIEMENS AMILO PRO V2030 platform will solve this issue. Reported-and-tested-by: Szymon Kowalczyk <fazerxlo@o2.pl> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, MCE, AMD: Make APIC LVT thresholding interrupt optionalBorislav Petkov2012-06-171-11/+44
| | | | | | | | | | | | | | | | | | commit f227d4306cf30e1d5b6f231e8ef9006c34f3d186 upstream. Currently, the APIC LVT interrupt for error thresholding is implicitly enabled. However, there are models in the F15h range which do not enable it. Make the code machinery which sets up the APIC interrupt support an optional setting and add an ->interrupt_capable member to the bank representation mirroring that capability and enable the interrupt offset programming only if it is true. Simplify code and fixup comment style while at it. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
* x86/mce: Fix check for processor context when machine check was taken.Tony Luck2012-06-011-6/+10
| | | | | | | | | | | | | | commit 875e26648cf9b6db9d8dc07b7959d7c61fb3f49c upstream. Linus pointed out that there was no value is checking whether m->ip was zero - because zero is a legimate value. If we have a reliable (or faked in the VM86 case) "m->cs" we can use it to tell whether we were in user mode or kernelwhen the machine check hit. Reported-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* perf/x86: Update event scheduling constraints for AMD family 15h modelsRobert Richter2012-06-011-1/+10
| | | | | | | | | | | | | | commit 5bcdf5e4fee3c45e1281c25e4941f2163cb28c65 upstream. This update is for newer family 15h cpu models from 0x02 to 0x1f. Signed-off-by: Robert Richter <robert.richter@amd.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1337337642-1621-1-git-send-email-robert.richter@amd.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* percpu, x86: don't use PMD_SIZE as embedded atom_size on 32bitTejun Heo2012-05-211-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit d5e28005a1d2e67833852f4c9ea8ec206ea3ff85 upstream. With the embed percpu first chunk allocator, x86 uses either PAGE_SIZE or PMD_SIZE for atom_size. PMD_SIZE is used when CPU supports PSE so that percpu areas are aligned to PMD mappings and possibly allow using PMD mappings in vmalloc areas in the future. Using larger atom_size doesn't waste actual memory; however, it does require larger vmalloc space allocation later on for !first chunks. With reasonably sized vmalloc area, PMD_SIZE shouldn't be a problem but x86_32 at this point is anything but reasonable in terms of address space and using larger atom_size reportedly leads to frequent percpu allocation failures on certain setups. As there is no reason to not use PMD_SIZE on x86_64 as vmalloc space is aplenty and most x86_64 configurations support PSE, fix the issue by always using PMD_SIZE on x86_64 and PAGE_SIZE on x86_32. v2: drop cpu_has_pse test and make x86_64 always use PMD_SIZE and x86_32 PAGE_SIZE as suggested by hpa. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Yanmin Zhang <yanmin.zhang@intel.com> Reported-by: ShuoX Liu <shuox.liu@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <4F97BA98.6010001@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, apic: APIC code touches invalid MSR on P5 class machinesBryan O'Donoghue2012-05-071-14/+20
| | | | | | | | | | | | | | | | | | | | | | | commit cbf2829b61c136edcba302a5e1b6b40e97d32c00 upstream. Current APIC code assumes MSR_IA32_APICBASE is present for all systems. Pentium Classic P5 and friends didn't have this MSR. MSR_IA32_APICBASE was introduced as an architectural MSR by Intel @ P6. Code paths that can touch this MSR invalidly are when vendor == Intel && cpu-family == 5 and APIC bit is set in CPUID - or when you simply pass lapic on the kernel command line, on a P5. The below patch stops Linux incorrectly interfering with the MSR_IA32_APICBASE for P5 class machines. Other code paths exist that touch the MSR - however those paths are not currently reachable for a conformant P5. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linux.intel.com> Link: http://lkml.kernel.org/r/4F8EEDD3.1080404@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* iommu/amd: Make sure IOMMU interrupts are re-enabled on resumeJoerg Roedel2012-04-131-7/+17
| | | | | | | | | | | | | | | | commit 9ddd592a191b32f2ee6c4b6ed2bd52665c3a49f5 upstream. Unfortunatly the interrupts for the event log and the peripheral page-faults are only enabled at boot but not re-enabled at resume. Fix that. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> [bwh: Backport to 3.0: - Drop change to PPR log which was added in 3.3 - Source is under arch/x86/kernel] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* sched/x86: Fix overflow in cyc2ns_offsetSalman Qazi2012-04-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9993bc635d01a6ee7f6b833b4ee65ce7c06350b1 upstream. When a machine boots up, the TSC generally gets reset. However, when kexec is used to boot into a kernel, the TSC value would be carried over from the previous kernel. The computation of cycns_offset in set_cyc2ns_scale is prone to an overflow, if the machine has been up more than 208 days prior to the kexec. The overflow happens when we multiply *scale, even though there is enough room to store the final answer. We fix this issue by decomposing tsc_now into the quotient and remainder of division by CYC2NS_SCALE_FACTOR and then performing the multiplication separately on the two components. Refactor code to share the calculation with the previous fix in __cycles_2_ns(). Signed-off-by: Salman Qazi <sqazi@google.com> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Turner <pjt@google.com> Cc: john stultz <johnstul@us.ibm.com> Link: http://lkml.kernel.org/r/20120310004027.19291.88460.stgit@dungbeetle.mtv.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "x86/ioapic: Add register level checks to detect bogus io-apic entries"Greg Kroah-Hartman2012-04-131-32/+8
| | | | | | | | | | | | | | | | | | This reverts commit c2ec63edaf48c90c3495eeb0b75bb05102fbf71a [73d63d038ee9f769f5e5b46792d227fe20e442c5 upstream] It causes problems, so needs to be reverted from 3.2-stable for now. Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jon Dufresne <jon@jondufresne.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: <yinghai@kernel.org> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Teck Choon Giam <giamteckchoon@gmail.com> Cc: Ben Guthro <ben@guthro.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86,kgdb: Fix DEBUG_RODATA limitation using text_poke()Jason Wessel2012-04-131-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 3751d3e85cf693e10e2c47c03c8caa65e171099b upstream. There has long been a limitation using software breakpoints with a kernel compiled with CONFIG_DEBUG_RODATA going back to 2.6.26. For this particular patch, it will apply cleanly and has been tested all the way back to 2.6.36. The kprobes code uses the text_poke() function which accommodates writing a breakpoint into a read-only page. The x86 kgdb code can solve the problem similarly by overriding the default breakpoint set/remove routines and using text_poke() directly. The x86 kgdb code will first attempt to use the traditional probe_kernel_write(), and next try using a the text_poke() function. The break point install method is tracked such that the correct break point removal routine will get called later on. Cc: x86@kernel.org Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Inspried-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, tls: Off by one limit checkDan Carpenter2012-04-021-2/+2
| | | | | | | | | | | | | commit 8f0750f19789cf352d7e24a6cc50f2ab1b4f1372 upstream. These are used as offsets into an array of GDT_ENTRY_TLS_ENTRIES members so GDT_ENTRY_TLS_ENTRIES is one past the end of the array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: http://lkml.kernel.org/r/20120324075250.GA28258@elgon.mountain Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, tsc: Skip refined tsc calibration on systems with reliable TSCAlok Kataria2012-04-021-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 57779dc2b3b75bee05ef5d1ada47f615f7a13932 upstream. While running the latest Linux as guest under VMware in highly over-committed situations, we have seen cases when the refined TSC algorithm fails to get a valid tsc_start value in tsc_refine_calibration_work from multiple attempts. As a result the kernel keeps on scheduling the tsc_irqwork task for later. Subsequently after several attempts when it gets a valid start value it goes through the refined calibration and either bails out or uses the new results. Given that the kernel originally read the TSC frequency from the platform, which is the best it can get, I don't think there is much value in refining it. So for systems which get the TSC frequency from the platform we should skip the refined tsc algorithm. We can use the TSC_RELIABLE cpu cap flag to detect this, right now it is set only on VMware and for Moorestown Penwell both of which have there own TSC calibration methods. Signed-off-by: Alok N Kataria <akataria@vmware.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Dirk Brandewie <dirk.brandewie@gmail.com> Cc: Alan Cox <alan@linux.intel.com> [jstultz: Reworked to simply not schedule the refining work, rather then scheduling the work and bombing out later] Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86-32: Fix endless loop when processing signals for kernel tasksDmitry Adamushko2012-04-021-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 29a2e2836ff9ea65a603c89df217f4198973a74f upstream. The problem occurs on !CONFIG_VM86 kernels [1] when a kernel-mode task returns from a system call with a pending signal. A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot). The loop is as follows: * syscall_exit_work: - work_pending: // start_of_the_loop - work_notify_sig: - do_notify_resume() - do_signal() - if (!user_mode(regs)) return; - resume_userspace // TIF_SIGPENDING is still set - work_pending // so we call work_pending => goto // start_of_the_loop More information can be found in another LKML thread: http://www.serverphorums.com/read.php?12,457826 [1] the problem was also seen on MIPS. Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com> Link: http://lkml.kernel.org/r/1332448765.2299.68.camel@dimm Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mm: thp: fix pmd_bad() triggering in code paths holding mmap_sem read modeAndrea Arcangeli2012-04-021-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 1a5a9906d4e8d1976b701f889d8f35d54b928f25 upstream. In some cases it may happen that pmd_none_or_clear_bad() is called with the mmap_sem hold in read mode. In those cases the huge page faults can allocate hugepmds under pmd_none_or_clear_bad() and that can trigger a false positive from pmd_bad() that will not like to see a pmd materializing as trans huge. It's not khugepaged causing the problem, khugepaged holds the mmap_sem in write mode (and all those sites must hold the mmap_sem in read mode to prevent pagetables to go away from under them, during code review it seems vm86 mode on 32bit kernels requires that too unless it's restricted to 1 thread per process or UP builds). The race is only with the huge pagefaults that can convert a pmd_none() into a pmd_trans_huge(). Effectively all these pmd_none_or_clear_bad() sites running with mmap_sem in read mode are somewhat speculative with the page faults, and the result is always undefined when they run simultaneously. This is probably why it wasn't common to run into this. For example if the madvise(MADV_DONTNEED) runs zap_page_range() shortly before the page fault, the hugepage will not be zapped, if the page fault runs first it will be zapped. Altering pmd_bad() not to error out if it finds hugepmds won't be enough to fix this, because zap_pmd_range would then proceed to call zap_pte_range (which would be incorrect if the pmd become a pmd_trans_huge()). The simplest way to fix this is to read the pmd in the local stack (regardless of what we read, no need of actual CPU barriers, only compiler barrier needed), and be sure it is not changing under the code that computes its value. Even if the real pmd is changing under the value we hold on the stack, we don't care. If we actually end up in zap_pte_range it means the pmd was not none already and it was not huge, and it can't become huge from under us (khugepaged locking explained above). All we need is to enforce that there is no way anymore that in a code path like below, pmd_trans_huge can be false, but pmd_none_or_clear_bad can run into a hugepmd. The overhead of a barrier() is just a compiler tweak and should not be measurable (I only added it for THP builds). I don't exclude different compiler versions may have prevented the race too by caching the value of *pmd on the stack (that hasn't been verified, but it wouldn't be impossible considering pmd_none_or_clear_bad, pmd_bad, pmd_trans_huge, pmd_none are all inlines and there's no external function called in between pmd_trans_huge and pmd_none_or_clear_bad). if (pmd_trans_huge(*pmd)) { if (next-addr != HPAGE_PMD_SIZE) { VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem)); split_huge_page_pmd(vma->vm_mm, pmd); } else if (zap_huge_pmd(tlb, vma, pmd, addr)) continue; /* fall through */ } if (pmd_none_or_clear_bad(pmd)) Because this race condition could be exercised without special privileges this was reported in CVE-2012-1179. The race was identified and fully explained by Ulrich who debugged it. I'm quoting his accurate explanation below, for reference. ====== start quote ======= mapcount 0 page_mapcount 1 kernel BUG at mm/huge_memory.c:1384! At some point prior to the panic, a "bad pmd ..." message similar to the following is logged on the console: mm/memory.c:145: bad pmd ffff8800376e1f98(80000000314000e7). The "bad pmd ..." message is logged by pmd_clear_bad() before it clears the page's PMD table entry. 143 void pmd_clear_bad(pmd_t *pmd) 144 { -> 145 pmd_ERROR(*pmd); 146 pmd_clear(pmd); 147 } After the PMD table entry has been cleared, there is an inconsistency between the actual number of PMD table entries that are mapping the page and the page's map count (_mapcount field in struct page). When the page is subsequently reclaimed, __split_huge_page() detects this inconsistency. 1381 if (mapcount != page_mapcount(page)) 1382 printk(KERN_ERR "mapcount %d page_mapcount %d\n", 1383 mapcount, page_mapcount(page)); -> 1384 BUG_ON(mapcount != page_mapcount(page)); The root cause of the problem is a race of two threads in a multithreaded process. Thread B incurs a page fault on a virtual address that has never been accessed (PMD entry is zero) while Thread A is executing an madvise() system call on a virtual address within the same 2 MB (huge page) range. virtual address space .---------------------. | | | | .-|---------------------| | | | | | |<-- B(fault) | | | 2 MB | |/////////////////////|-. huge < |/////////////////////| > A(range) page | |/////////////////////|-' | | | | | | '-|---------------------| | | | | '---------------------' - Thread A is executing an madvise(..., MADV_DONTNEED) system call on the virtual address range "A(range)" shown in the picture. sys_madvise // Acquire the semaphore in shared mode. down_read(&current->mm->mmap_sem) ... madvise_vma switch (behavior) case MADV_DONTNEED: madvise_dontneed zap_page_range unmap_vmas unmap_page_range zap_pud_range zap_pmd_range // // Assume that this huge page has never been accessed. // I.e. content of the PMD entry is zero (not mapped). // if (pmd_trans_huge(*pmd)) { // We don't get here due to the above assumption. } // // Assume that Thread B incurred a page fault and .---------> // sneaks in here as shown below. | // | if (pmd_none_or_clear_bad(pmd)) | { | if (unlikely(pmd_bad(*pmd))) | pmd_clear_bad | { | pmd_ERROR | // Log "bad pmd ..." message here. | pmd_clear | // Clear the page's PMD entry. | // Thread B incremented the map count | // in page_add_new_anon_rmap(), but | // now the page is no longer mapped | // by a PMD entry (-> inconsistency). | } | } | v - Thread B is handling a page fault on virtual address "B(fault)" shown in the picture. ... do_page_fault __do_page_fault // Acquire the semaphore in shared mode. down_read_trylock(&mm->mmap_sem) ... handle_mm_fault if (pmd_none(*pmd) && transparent_hugepage_enabled(vma)) // We get here due to the above assumption (PMD entry is zero). do_huge_pmd_anonymous_page alloc_hugepage_vma // Allocate a new transparent huge page here. ... __do_huge_pmd_anonymous_page ... spin_lock(&mm->page_table_lock) ... page_add_new_anon_rmap // Here we increment the page's map count (starts at -1). atomic_set(&page->_mapcount, 0) set_pmd_at // Here we set the page's PMD entry which will be cleared // when Thread A calls pmd_clear_bad(). ... spin_unlock(&mm->page_table_lock) The mmap_sem does not prevent the race because both threads are acquiring it in shared mode (down_read). Thread B holds the page_table_lock while the page's map count and PMD table entry are updated. However, Thread A does not synchronize on that lock. ====== end quote ======= [akpm@linux-foundation.org: checkpatch fixes] Reported-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Jones <davej@redhat.com> Acked-by: Larry Woodman <lwoodman@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/ioapic: Add register level checks to detect bogus io-apic entriesSuresh Siddha2012-04-021-8/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 73d63d038ee9f769f5e5b46792d227fe20e442c5 upstream. With the recent changes to clear_IO_APIC_pin() which tries to clear remoteIRR bit explicitly, some of the users started to see "Unable to reset IRR for apic .." messages. Close look shows that these are related to bogus IO-APIC entries which return's all 1's for their io-apic registers. And the above mentioned error messages are benign. But kernel should have ignored such io-apic's in the first place. Check if register 0, 1, 2 of the listed io-apic are all 1's and ignore such io-apic. Reported-by: Álvaro Castillo <midgoon@gmail.com> Tested-by: Jon Dufresne <jon@jondufresne.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: kernel-team@fedoraproject.org Cc: Josh Boyer <jwboyer@redhat.com> Link: http://lkml.kernel.org/r/1331577393.31585.94.camel@sbsiddha-desk.sc.intel.com [ Performed minor cleanup of affected code. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/amd: Fix L1i and L2 cache sharing information for AMD family 15h processorsAndreas Herrmann2012-02-291-8/+36
| | | | | | | | | | | | | | | | | | commit 32c3233885eb10ac9cb9410f2f8cd64b8df2b2a1 upstream. For L1 instruction cache and L2 cache the shared CPU information is wrong. On current AMD family 15h CPUs those caches are shared between both cores of a compute unit. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=42607 Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Petkov Borislav <Borislav.Petkov@amd.com> Cc: Dave Jones <davej@redhat.com> Link: http://lkml.kernel.org/r/20120208195229.GA17523@alberich.amd.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: re-introduce FPU state preloading at context switch timeLinus Torvalds2012-02-293-25/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 34ddc81a230b15c0e345b6b253049db731499f7e upstream. After all the FPU state cleanups and finally finding the problem that caused all our FPU save/restore problems, this re-introduces the preloading of FPU state that was removed in commit b3b0870ef3ff ("i387: do not preload FPU state at task switch time"). However, instead of simply reverting the removal, this reimplements preloading with several fixes, most notably - properly abstracted as a true FPU state switch, rather than as open-coded save and restore with various hacks. In particular, implementing it as a proper FPU state switch allows us to optimize the CR0.TS flag accesses: there is no reason to set the TS bit only to then almost immediately clear it again. CR0 accesses are quite slow and expensive, don't flip the bit back and forth for no good reason. - Make sure that the same model works for both x86-32 and x86-64, so that there are no gratuitous differences between the two due to the way they save and restore segment state differently due to architectural differences that really don't matter to the FPU state. - Avoid exposing the "preload" state to the context switch routines, and in particular allow the concept of lazy state restore: if nothing else has used the FPU in the meantime, and the process is still on the same CPU, we can avoid restoring state from memory entirely, just re-expose the state that is still in the FPU unit. That optimized lazy restore isn't actually implemented here, but the infrastructure is set up for it. Of course, older CPU's that use 'fnsave' to save the state cannot take advantage of this, since the state saving also trashes the state. In other words, there is now an actual _design_ to the FPU state saving, rather than just random historical baggage. Hopefully it's easier to follow as a result. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: move TS_USEDFPU flag from thread_info to task_structLinus Torvalds2012-02-292-7/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f94edacf998516ac9d849f7bc6949a703977a7f3 upstream. This moves the bit that indicates whether a thread has ownership of the FPU from the TS_USEDFPU bit in thread_info->status to a word of its own (called 'has_fpu') in task_struct->thread.has_fpu. This fixes two independent bugs at the same time: - changing 'thread_info->status' from the scheduler causes nasty problems for the other users of that variable, since it is defined to be thread-synchronous (that's what the "TS_" part of the naming was supposed to indicate). So perfectly valid code could (and did) do ti->status |= TS_RESTORE_SIGMASK; and the compiler was free to do that as separate load, or and store instructions. Which can cause problems with preemption, since a task switch could happen in between, and change the TS_USEDFPU bit. The change to TS_USEDFPU would be overwritten by the final store. In practice, this seldom happened, though, because the 'status' field was seldom used more than once, so gcc would generally tend to generate code that used a read-modify-write instruction and thus happened to avoid this problem - RMW instructions are naturally low fat and preemption-safe. - On x86-32, the current_thread_info() pointer would, during interrupts and softirqs, point to a *copy* of the real thread_info, because x86-32 uses %esp to calculate the thread_info address, and thus the separate irq (and softirq) stacks would cause these kinds of odd thread_info copy aliases. This is normally not a problem, since interrupts aren't supposed to look at thread information anyway (what thread is running at interrupt time really isn't very well-defined), but it confused the heck out of irq_fpu_usable() and the code that tried to squirrel away the FPU state. (It also caused untold confusion for us poor kernel developers). It also turns out that using 'task_struct' is actually much more natural for most of the call sites that care about the FPU state, since they tend to work with the task struct for other reasons anyway (ie scheduling). And the FPU data that we are going to save/restore is found there too. Thanks to Arjan Van De Ven <arjan@linux.intel.com> for pointing us to the %esp issue. Cc: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: Raphael Prevost <raphael@buro.asia> Acked-and-tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: move AMD K7/K8 fpu fxsave/fxrstor workaround from save to restoreLinus Torvalds2012-02-292-3/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4903062b5485f0e2c286a23b44c9b59d9b017d53 upstream. The AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception is pending. In order to not leak FIP state from one process to another, we need to do a floating point load after the fxsave of the old process, and before the fxrstor of the new FPU state. That resets the state to the (uninteresting) kernel load, rather than some potentially sensitive user information. We used to do this directly after the FPU state save, but that is actually very inconvenient, since it (a) corrupts what is potentially perfectly good FPU state that we might want to lazy avoid restoring later and (b) on x86-64 it resulted in a very annoying ordering constraint, where "__unlazy_fpu()" in the task switch needs to be delayed until after the DS segment has been reloaded just to get the new DS value. Coupling it to the fxrstor instead of the fxsave automatically avoids both of these issues, and also ensures that we only do it when actually necessary (the FP state after a save may never actually get used). It's simply a much more natural place for the leaked state cleanup. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: do not preload FPU state at task switch timeLinus Torvalds2012-02-293-67/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit b3b0870ef3ffed72b92415423da864f440f57ad6 upstream. Yes, taking the trap to re-load the FPU/MMX state is expensive, but so is spending several days looking for a bug in the state save/restore code. And the preload code has some rather subtle interactions with both paravirtualization support and segment state restore, so it's not nearly as simple as it should be. Also, now that we no longer necessarily depend on a single bit (ie TS_USEDFPU) for keeping track of the state of the FPU, we migth be able to do better. If we are really switching between two processes that keep touching the FP state, save/restore is inevitable, but in the case of having one process that does most of the FPU usage, we may actually be able to do much better than the preloading. In particular, we may be able to keep track of which CPU the process ran on last, and also per CPU keep track of which process' FP state that CPU has. For modern CPU's that don't destroy the FPU contents on save time, that would allow us to do a lazy restore by just re-enabling the existing FPU state - with no restore cost at all! Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: don't ever touch TS_USEDFPU directly, use helper functionsLinus Torvalds2012-02-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | commit 6d59d7a9f5b723a7ac1925c136e93ec83c0c3043 upstream. This creates three helper functions that do the TS_USEDFPU accesses, and makes everybody that used to do it by hand use those helpers instead. In addition, there's a couple of helper functions for the "change both CR0.TS and TS_USEDFPU at the same time" case, and the places that do that together have been changed to use those. That means that we have fewer random places that open-code this situation. The intent is partly to clarify the code without actually changing any semantics yet (since we clearly still have some hard to reproduce bug in this area), but also to make it much easier to use another approach entirely to caching the CR0.TS bit for software accesses. Right now we use a bit in the thread-info 'status' variable (this patch does not change that), but we might want to make it a full field of its own or even make it a per-cpu variable. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: fix x86-64 preemption-unsafe user stack save/restoreLinus Torvalds2012-02-292-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 15d8791cae75dca27bfda8ecfe87dca9379d6bb0 upstream. Commit 5b1cbac37798 ("i387: make irq_fpu_usable() tests more robust") added a sanity check to the #NM handler to verify that we never cause the "Device Not Available" exception in kernel mode. However, that check actually pinpointed a (fundamental) race where we do cause that exception as part of the signal stack FPU state save/restore code. Because we use the floating point instructions themselves to save and restore state directly from user mode, we cannot do that atomically with testing the TS_USEDFPU bit: the user mode access itself may cause a page fault, which causes a task switch, which saves and restores the FP/MMX state from the kernel buffers. This kind of "recursive" FP state save is fine per se, but it means that when the signal stack save/restore gets restarted, it will now take the '#NM' exception we originally tried to avoid. With preemption this can happen even without the page fault - but because of the user access, we cannot just disable preemption around the save/restore instruction. There are various ways to solve this, including using the "enable/disable_page_fault()" helpers to not allow page faults at all during the sequence, and fall back to copying things by hand without the use of the native FP state save/restore instructions. However, the simplest thing to do is to just allow the #NM from kernel space, but fix the race in setting and clearing CR0.TS that this all exposed: the TS bit changes and the TS_USEDFPU bit absolutely have to be atomic wrt scheduling, so while the actual state save/restore can be interrupted and restarted, the act of actually clearing/setting CR0.TS and the TS_USEDFPU bit together must not. Instead of just adding random "preempt_disable/enable()" calls to what is already excessively ugly code, this introduces some helper functions that mostly mirror the "kernel_fpu_begin/end()" functionality, just for the user state instead. Those helper functions should probably eventually replace the other ad-hoc CR0.TS and TS_USEDFPU tests too, but I'll need to think about it some more: the task switching functionality in particular needs to expose the difference between the 'prev' and 'next' threads, while the new helper functions intentionally were written to only work with 'current'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: make irq_fpu_usable() tests more robustLinus Torvalds2012-02-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 5b1cbac37798805c1fee18c8cebe5c0a13975b17 upstream. Some code - especially the crypto layer - wants to use the x86 FP/MMX/AVX register set in what may be interrupt (typically softirq) context. That *can* be ok, but the tests for when it was ok were somewhat suspect. We cannot touch the thread-specific status bits either, so we'd better check that we're not going to try to save FP state or anything like that. Now, it may be that the TS bit is always cleared *before* we set the USEDFPU bit (and only set when we had already cleared the USEDFP before), so the TS bit test may actually have been sufficient, but it certainly was not obviously so. So this explicitly verifies that we will not touch the TS_USEDFPU bit, and adds a few related sanity-checks. Because it seems that somehow AES-NI is corrupting user FP state. The cause is not clear, and this patch doesn't fix it, but while debugging it I really wanted the code to be more obviously correct and robust. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* i387: math_state_restore() isn't called from asmLinus Torvalds2012-02-291-3/+3
| | | | | | | | | | | | | commit be98c2cdb15ba26148cd2bd58a857d4f7759ed38 upstream. It was marked asmlinkage for some really old and stale legacy reasons. Fix that and the equally stale comment. Noticed when debugging the irq_fpu_usable() bugs. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86/microcode_amd: Add support for CPU family specific container filesAndreas Herrmann2012-02-031-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | commit 5b68edc91cdc972c46f76f85eded7ffddc3ff5c2 upstream. We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* x86, UV: Update Boot messages for SGI UV2 platformJack Steiner2012-01-251-1/+6
| | | | | | | | | | | | | | | | | | commit da517a08ac5913cd80ce3507cddd00f2a091b13c upstream. SGI UV systems print a message during boot: UV: Found <num> blades Due to packaging changes, the blade count is not accurate for on the next generation of the platform. This patch corrects the count. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20120106191900.GA19772@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* x86/PCI: amd: factor out MMCONFIG discoveryBjorn Helgaas2012-01-251-0/+31
| | | | | | | | | | | | | | | | | | commit 24d25dbfa63c376323096660bfa9ad45a08870ce upstream. This factors out the AMD native MMCONFIG discovery so we can use it outside amd_bus.c. amd_bus.c reads AMD MSRs so it can remove the MMCONFIG area from the PCI resources. We may also need the MMCONFIG information to work around BIOS defects in the ACPI MCFG table. Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* x86, hpet: Immediately disable HPET timer 1 if rtc irq is maskedMark Langsdorf2011-12-211-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 upstream. When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* perf/x86: Fix PEBS instruction unwindPeter Zijlstra2011-12-091-1/+5
| | | | | | | | | | | | | | | | | commit 57d1c0c03c6b48b2b96870d831b9ce6b917f53ac upstream. Masami spotted that we always try to decode the instruction stream as 64bit instructions when running a 64bit kernel, this doesn't work for ia32-compat proglets. Use TIF_IA32 to detect if we need to use the 32bit instruction decoder. Reported-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* x86: Fix "Acer Aspire 1" reboot hangPeter Chubb2011-12-091-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | commit 1ef03890969932e9359b9a4c658f7f87771910ac upstream. Looks like on some Acer Aspire 1s with older bioses, reboot via bios fails. It works on my machine, (with BIOS version 0.3310) but not on some others (BIOS version 0.3309). There's a log of problems at: https://bbs.archlinux.org/viewtopic.php?id=124136 This patch adds a different callback to the reboot quirk table, to allow rebooting via keybaord controller. Reported-by: Uroš Vampl <mobile.leecher@gmail.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1323093233-9481-1-git-send-email-anarsoul@gmail.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.1 at 2025-02-15 18:14:42 +0000