aboutsummaryrefslogtreecommitdiffstats
path: root/sound/isa
Commit message (Collapse)AuthorAgeFilesLines
* Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day2007-10-191-2/+2
| | | | | | | | Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
* [ALSA] Fix thinko in cs4231 mce down checkTakashi Iwai2007-10-161-6/+7
| | | | | | | The last patches to replace with schedule_timeout() don't work as expected. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] This patch adds support for a wavetable chip onKrzysztof Helt2007-10-161-0/+10
| | | | | | | | | | the BTC 1817DW board. The QS1000 is connected through the digital input to the Opti931 chip. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] This patch removes open_mutex from the ad1848-lib asKrzysztof Helt2007-10-161-11/+3
| | | | | | | | | open and close operations are called only from pcm layer and mutexed there with pcm->open_mutex. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] fix bootup crash in snd_gus_interrupt()Ingo Molnar2007-10-162-14/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when simulating a storm of fake GUS interrupts (without actually owning this venerable piece of ISA hardware) the driver falls over (crashes) in two ways: 1) spinlocks being initialized too late: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<401064b2>] show_trace+0x12/0x20 [<401064d6>] dump_stack+0x16/0x20 [<4014a72b>] __lock_acquire+0xcfb/0x1030 [<4014aac0>] lock_acquire+0x60/0x80 [<40721a68>] _spin_lock_irqsave+0x38/0x50 [<4058fc12>] snd_gf1_i_look8+0x22/0x60 [<405906fe>] snd_gus_interrupt+0x13e/0x270 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<40156822>] register_handler_proc+0x92/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= 2) callback functions not being filled in yet: BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: 00000000 *pde = 00000000 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU: 0 EIP: 0060:[<00000000>] Not tainted VLI EFLAGS: 00010002 (2.6.23 #37) EIP is at 0x0 eax: 7fe94000 ebx: 7fe94000 ecx: 00000000 edx: 00000226 esi: 00000000 edi: 00000005 ebp: 7ff87c28 esp: 7ff87bf4 ds: 007b es: 007b fs: 00d8 gs: 0000 ss: 0068 Process swapper (pid: 1, ti=7ff86000 task=7ff84000 task.ti=7ff86000) Stack: 40590683 408424a9 408db87c 00000029 40787406 00000064 00000046 ff000000 000000ff 00000001 7faefaf0 00000000 00000005 7ff87c40 401548e8 00000000 40a52000 7faefaf0 00000005 7ff87c58 40155cc1 40a52030 00000005 00000000 Call Trace: [<401058ca>] show_trace_log_lvl+0x1a/0x30 [<4010598b>] show_stack_log_lvl+0xab/0xd0 [<40105b7c>] show_registers+0x1cc/0x2d0 [<40105d96>] die+0x116/0x240 [<4011d7bb>] do_page_fault+0x18b/0x670 [<40721d22>] error_code+0x72/0x80 [<401548e8>] handle_IRQ_event+0x28/0x60 [<40155cc1>] handle_fasteoi_irq+0x71/0xe0 [<40107238>] do_IRQ+0x48/0xa0 [<401051fe>] common_interrupt+0x2e/0x40 [<401a344e>] proc_create+0x3e/0x120 [<401a3733>] proc_mkdir_mode+0x23/0x50 [<401a376f>] proc_mkdir+0xf/0x20 [<40156864>] register_handler_proc+0xd4/0xf0 [<401550c2>] setup_irq+0xe2/0x190 [<40155224>] request_irq+0xb4/0xd0 [<4058f524>] snd_gus_create+0x124/0x3c0 [<40aa4087>] snd_gusclassic_probe+0x2a7/0x4b0 [<403f5eff>] isa_bus_probe+0x1f/0x30 [<403f1944>] driver_probe_device+0x84/0x190 [<403f1a58>] __device_attach+0x8/0x10 [<403f0e63>] bus_for_each_drv+0x53/0x80 [<403f1b1b>] device_attach+0x8b/0x90 [<403f0dd8>] bus_attach_device+0x48/0x80 [<403efdbd>] device_add+0x45d/0x5a0 [<403eff12>] device_register+0x12/0x20 [<403f60c3>] isa_register_driver+0xb3/0x140 [<40aa3dd2>] alsa_card_gusclassic_init+0x12/0x20 [<40a665c3>] kernel_init+0x133/0x310 [<401054a7>] kernel_thread_helper+0x7/0x10 ======================= Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:7ff87bf4 Kernel panic - not syncing: Fatal exception in interrupt with these things fixed, i get the expected 'no such hardware' result from the driver initialization: Calling initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() ALSA sound/isa/gus/gusclassic.c:136: [0x220] check 1 failed - 0xff initcall 0x40aa3dc0: alsa_card_gusclassic_init+0x0/0x20() returned 0. initcall 0x40aa3dc0 ran for 133 msecs: alsa_card_gusclassic_init+0x0/0x20() Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.czJaroslav Kysela2007-10-1649-71/+71
| | | | Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] ad1848: simplify MCE down codeTrent Piepho2007-10-161-36/+21
| | | | | | | | | | | | | | | | The polling loop to check for ACI to go down was more convoluted than it needed to be. New loop should be more efficient and it is a lot simpler. The old loop checked for a timeout before checking for ACI down, which could result in an erroneous timeout. It's only a failure if the timeout expires _and_ ACI is still high. There is nothing wrong with the timeout expiring while the task is sleeping if ACI went low. A polling loop to check for the device to leaving INIT mode is removed. The device must have already left init for the previous ACI loop to have finished. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848: Fix msleep while atomicTrent Piepho2007-10-161-0/+2
| | | | | | | | | Simplest fix. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] alsa-kernel: schedule_timeout() fixesRene Herman2007-10-162-8/+6
| | | | | | | | | | | | | Fix schedule_timeout() use in alsa-kernel. Mostly just schedule_timeout(1) --> schedule_timeout_uninterruptible(1) The wavefront_synth one fixes the surrounding loop as well. In ymfpci_main, delete a superfluous set_current_state() and in soc/soc-dapm.c replace an _interruptible with _uninterruptible in some debug code; it's not waiting for signals. Signed-off-by: Rene Herman <rene.herman> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] sscape: support for audio part of VIVO cardsKrzysztof Helt2007-10-161-75/+145
| | | | | | | | | This patch adds support for audio part of the Ensoniq SoundScape VIVO cards. The MIDI part is not supported. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] opti9xx: adjust OPL3 FM resource valueTakashi Iwai2007-10-161-2/+2
| | | | | | | | | | | | | | | The OPTi ISA-PnP chips advertise their OPL4 base at 0x380 (to 0x3f0) through pnp and put their on-chip OPL3 at +8. The driver assumes the provided value is the ALBase (OPL3 address) though and checks for an OPL4 at -8, which means that simply adding 8 to the pnp provides value works to fix detection of both OPL3 and OPL4. Problem spotted on 931 and 933 by Krzysztof Helt and confirmed on 924 and 925 (together all OPTi ISA-PnP chips) by me. Signed-off-by; Rene Herman <rene.herman@gmail.com> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] sscape: driver extension to 2nd DMA and WSS portKrzysztof Helt2007-10-161-50/+100
| | | | | | | | | | | This patch adds second DMA channel and WSS port settings to the sscape driver. Also, it adds internal card type setting. The Ensoniq SoundScape VIVO PnP id is added but not handled yet. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] sc6000: 2 minor fixesKrzysztof Helt2007-10-161-1/+2
| | | | | | | | | This patch zeroes buffer for the card name and fixes incorrect jump in the probe function. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848_lib: waiting loops done after cs4231_libKrzysztof Helt2007-10-161-7/+7
| | | | | | | | | This patch fixes ad1848_lib waiting loops to be the same as in the cs4231_lib. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] sc6000 build fixAndrew Morton2007-10-161-0/+1
| | | | | | | | | | | sound/isa/sc6000.c: In function 'sc6000_dsp_reset': sound/isa/sc6000.c:270: error: implicit declaration of function 'udelay' sound/isa/sc6000.c: In function 'sc6000_init_mss': sound/isa/sc6000.c:327: error: implicit declaration of function 'msleep' {standard input}: Assembler messages: Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] SC6000 driver - add HAS_IOPORT dependencyJaroslav Kysela2007-10-161-1/+1
| | | | Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Gallant SC-6000 driverKrzysztof Helt2007-10-163-0/+669
| | | | | | | | | | This is port of the Gallant SC-6000 driver from the OSS aedsp16 driver. This card was also sold as AudioExcel DSP 16 and Zoltrix AV302 (Audio Plus True 16). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] cs4231-lib: improved waiting after mce_downKrzysztof Helt2007-10-161-10/+13
| | | | | | | | | This patch replaces long msleeps in waiting loops with schedule_timeout() calls. Signed-off-by: Krzysztof Helt <krzysztof.h1 at wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848/cs4231: replace commented out debug code with snd-printd{,d}Rene Herman2007-10-162-26/+23
| | | | | | | | | While I'm at it another 'while I'm there' -- replace commented out debug code with snd-printd{,d}. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848: replace HZ calculus with msecs_to_jiffies()Rene Herman2007-10-161-2/+2
| | | | | | | | | If I'm not mistaken, any (new) use of HZ these days is considered a bug so while I'm there... Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1838/cs4231 - fix MCE timeout upon initial loadRene Herman2007-10-162-17/+14
| | | | | | | | | | | | | | | | | | When the ad1848/cs2431 is first being initialized, auto-calibration may not be set causing a timeout waiting for it in snd_ad1848/cs4231_mce_down(). This has no dire consequences other than an alarming printk, but since what we need to wait for is for the calibration to _finish_, let's just check for that instead. The early chips need a slight delay (as commented -- 5 sample periods) to be sure that _if_ calibration is going to happen, it has started when we check While the CS4231A datasheet implies it'll happen immediately on downing MCE, some testing is showing that there's a window there as well, so just do the delay everywhere. Thanks to Krysztof Helt for pinpointing this problem. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] cs4231-lib: replace common delay loop by functionKrzysztof Helt2007-10-161-30/+20
| | | | | | | | | | This patch replaces a common delay loop by a function. It also uses ARRAY_SIZE macro for the rates table. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1848_lib: replace common delay loop by functionKrzysztof Helt2007-10-161-22/+24
| | | | | | | | | | This patch replaces a common delay loop by a function. It also uses ARRAY_SIZE macro for the rates table. Acked-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Allow shared IRQ for CS5530 deviceTakashi Iwai2007-10-161-1/+3
| | | | | | | | | CS5530 is a PCI device and often shares the IRQ although the SB common routine tries to allocate it exclusively. This patch allows shared IRQ for CS5530. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] wavefront - Use standard firmware loaderTakashi Iwai2007-10-162-81/+48
| | | | | | | | | | | | | Use the standard firmware loader for loading ICS2115 OS firmware file. This is the last old bad guy that is still using sys_open() and sys_read() calls, and now all should be gone. The patch also adds the missing description of module options related with wavefront_synth.c. Due to this rewrite, user will have to copy or make symlink the firmware file appropriately to the standard firmware path such as /lib/firmware. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] remove incorrect usage of SNDRV_PCM_INFO_SYNC_START and ↵Clemens Ladisch2007-10-161-2/+0
| | | | | | | | | | snd_pcm_set_sync() Set the SNDRV_PCM_INFO_SYNC_START flag and the substream's sync ID (only) if the substream actually can be linked to another one. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] isa libs Makefiles cleanupKrzysztof Helt2007-10-162-18/+6
| | | | | | | | | | This patch uses the Kconfig parameters SND_AD1848_LIB and SND_CS4231_LIB instead of mentioning each driver that requires the ad1848-lib or cs4231-lib separately in the Makefiles. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] add the ESS1879 pnpbios ID to the es18xx driverRene Herman2007-10-161-0/+1
| | | | | | | | | | | As reported by Troy Heidner, the 'Gateway Solo 5150' laptop (for one) has an onboard ESS1879 that identifies itself through PNPBIOS as just that. He also confirmed that other than not knowing about it, snd-es18xx drives the chip fine, so this adds the ID to the driver. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix bugs in mode change/recalibration for opl3sa2 driverPaul Vojta2007-10-162-0/+3
| | | | | | | | | The mode change / recalibration doesn't work always with opl3sa2 devices, e.g. the first time it's played back. The patch fixes the problem. Signed-off-by: Paul Vojta <vojta@math.berkeley.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai2007-10-164-48/+6
| | | | | | | Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] fix SND_CS5530=y, ISA=n compilationAdrian Bunk2007-07-201-3/+3
| | | | | | | | | | | | | | | | | | | | | This patch fixes the following compile error with CONFIG_SND_CS5530=y, CONFIG_ISA=n: <-- snip --> ... LD .tmp_vmlinux1 sound/built-in.o: In function 'snd_sb16_capture_trigger': sb16_main.c:(.text+0x212ad): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212cc): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x212f7): undefined reference to 'snd_sbdsp_command' sound/built-in.o: In function 'snd_sb16_playback_trigger': sb16_main.c:(.text+0x2136d): undefined reference to 'snd_sbdsp_command' sb16_main.c:(.text+0x2138c): undefined reference to 'snd_sbdsp_command' ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] opl3sa2 - Add Neomagic MagicWave 3D ISA PnP IDPaul Vojta2007-07-201-0/+2
| | | | | | | | | Add Neomagic MagicWave 3D to list of supported devices for opl3sa2 driver. Signed-off-by: Paul Vojta <vojta@math.berkeley.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix invalid schedule_timeout_interruptible()Takashi Iwai2007-07-203-5/+5
| | | | | | | | | Fixed the invalid use of schedule_timeout_interruptible() without checking pending signals. Simply replaced with schedule_timeout(). Suggestions thanks to Jeff Garzik. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix SB-module dependency with PCI driversTakashi Iwai2007-07-202-14/+27
| | | | | | | | | A few PCI drivers like ALS4000 and CS5530 require the SB16-codes. This patch fixes / improves the dependency between SB modules and PCI drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add support for Cyrix/NatSemi Geode CS5530 (VSA1)Takashi Iwai2007-07-203-1/+17
| | | | | | | | | Add support for Cyrix/NatSemi Geode SC5530 (VSA1). The driver is snd-cs5530. Signed-off-by Ash Willis <ashwillis@programmer.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Fix unfreed pnp driver in opti9xx ISA driverTakashi Iwai2007-07-201-0/+3
| | | | | | | | | | | | | | | | | | - Added the missing pnp_unregister_card_driver() in the case ISA PnP isn't found, which caused an error at kobject_add with -EEXIST Jun 11 09:07:31 rain kernel: kobject_add failed for opti9xx with -EEXIST, don't try to register things with the same name in the same directory. Jun 11 09:07:31 rain kernel: [<c01c18fa>] kobject_shadow_add+0x12a/0x1c0 Jun 11 09:07:31 rain kernel: [<c01c1a81>] kobject_register+0x21/0x50 Jun 11 09:07:31 rain kernel: [<c01f09a2>] bus_add_driver+0x72/0x1b0 Jun 11 09:07:31 rain kernel: [<c01d3dff>] pnp_register_card_driver+0x4f/0xc0 Jun 11 09:07:31 rain kernel: [<c89bc00a>] alsa_card_opti9xx_init+0xa/0x25 [snd_opti92x_ad1848] Jun 11 09:07:31 rain kernel: [<c0136947>] sys_init_module+0x157/0x1610 Jun 11 09:07:31 rain kernel: [<c01029b4>] syscall_call+0x7/0xb - Fixed the probe behavior when no PnP is set up. Now it behaves like the former version. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* ALSA: use __devexit_pRandy Dunlap2007-06-281-1/+1
| | | | | | | | | | | Change __devexit to __devexit_p: sound/isa/opl3sa2.c:956: error: expected expression before '__attribute__' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ALSA] Fix probe of non-PnP ISA devicesRene Herman2007-05-168-47/+94
| | | | | | | | | isa_register_driver() returns an error if no device is found and it's no fatal error for the drivers with pnp support. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] wavefront: only declare isapnp on CONFIG_PNPDavid Rientjes2007-05-111-0/+2
| | | | | | | | | | | | From: David Rientjes <rientjes@google.com> isapnp[] is only used for CONFIG_PNP. If this configuration option is not set, do not declare the array. Cc: Adam Belay <ambx1@neo.rr.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] add MODULE_FIRMWARE entriesClemens Ladisch2007-05-112-0/+11
| | | | | | | Add MODULE_FIRMWARE() entries, where appropriate. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] do not depend on FW_LOADER when internal firmware images are usedClemens Ladisch2007-05-111-2/+2
| | | | | | | | | Since request_firmware() is no longer used when the internal firmware images are used, it is no longer necessary to depend on FW_LOADER in this case. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Don't use request_firmware if internal firmwares are definedTakashi Iwai2007-05-112-16/+16
| | | | | | | | | Don't use request_firmware() if the internal firmwares are defined via Kconfig. Otherwise it results in a significant delay at loading time (minutes). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] isa_bus device/driver namingRene Herman2007-05-1112-30/+30
| | | | | | | | isa_bus: delete snd_ prefix from the (sysfs visible) device/driver names. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] ad1816a: Fix modprobe snd_mpu401 && modprobe snd_ad1816aRask Ingemann Lambertsen2007-05-111-2/+6
| | | | | | | | | | | | The ad1816a driver fails if the mpu401 driver has been loaded first. This patch against linux 2.6.20 fixes it by just ignoring the MPU-401 device in that case, so that the rest of the sound card can be used. The ad1816a driver already handles the MPU-401 device being unavailable due to lack of resources in the same way. Signed-off-by: Rask Ingemann Lambertsen <rask@sygehus.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Kconfig: clarify help text for external firmware entriesClemens Ladisch2007-05-111-4/+4
| | | | | | | | The external firmware files are not in the alsa-plugins but in the alsa-firmware package. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Kconfig: fix FW_LOADER dependenciesClemens Ladisch2007-05-111-2/+2
| | | | | | | | | Move the FW_LOADER dependencies out of the *_FIRMWARE_IN_KERNEL entries because these drivers use the firmware loader regardless of whether there is an in-kernel firmware image. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Enable Kconfig options for external firmwaresTakashi Iwai2007-05-113-11/+25
| | | | | | | | Some drivers are already ifdefs for enabling external firmwares but not defined in Kconfig. Now they appear as the kernel configs. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Add snd_pcm_group_for_each_entry() for code cleanupTakashi Iwai2007-05-112-6/+2
| | | | | | | | | Added a new macro snd_pcm_group_for_each_entry() just for code cleanup. Old macros, snd_pcm_group_for_each() and snd_pcm_group_substream_entry(), are removed. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Port the rest of ALSA ISA drivers to isa_driverTakashi Iwai2007-05-1113-837/+483
| | | | | | | | Port the rest of ALSA ISA drivers to use isa_driver framework instead of platform_driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] gusextreme: set codec_flagRene Herman2007-05-111-0/+1
| | | | | | | | | | The gusextreme driver neglects to set the gus->codec_flag meaning snd_gf1_pcm_new() allocates a second 'PCM Playback Volume' control, which makes the driver fail to load. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
generated by cgit v1.1 at 2024-12-27 06:35:09 +0000