aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci
Commit message (Collapse)AuthorAgeFilesLines
...
| | * | | | ALSA: hda - factorize an automute_mic realtek quirk functionAnisse Astier2010-12-161-28/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Multiple quirk functions were using the exact same code to verify if the Mic jack was plugged and mute the Mic accordingly Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | ALSA: hda - Mute speakers when line-out jack is plugged with Conexant auto modeTakashi Iwai2010-12-131-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mute speakers when a line-out jack is plugged as well as headphone jacks with the new Conexant codec parser in the auto mode. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | ALSA: hda: Add fixup for mario systemTodd Broch2010-12-091-1/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | create fixup function for the mario model and override amp capabilities for NID 0x2 Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | ALSA: hda: Add modelname lookup and fixup for realtek codecsTodd Broch2010-12-091-12/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Facilitate fixup for realtek codecs via modelname lookup of fixup data. Fallback to quirk based lookup in absence of model definition. Signed-off-by: Todd Broch <tbroch@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | ALSA: HDA: Remove unconnected PCM devices for Intel HDMIDavid Henningsson2010-12-081-9/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some newer chips have more than one HDMI output, but usually not all of them are exposed as physical jacks. Removing the unused PCM devices (as indicated by BIOS in the pin config default) will reduce user confusion as they currently have to choose between several HDMI devices, some of them not working anyway. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-12-084-15/+12
| | |\ \ \ \
| | * | | | | ALSA: hda - use generic hdmi parser for ATI R6xx codecAnssi Hannula2010-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to the generic hdmi parser for codec id 1002:aa01 (ATI R6xx HDMI), as the codec appears to work fine with it. Note that the codec is still limited to stereo output only, despite it reportedly being multichannel capable. Some as of yet unknown quirks will be needed to get that working. Testing was done on 2.6.36 by John Ettedgui. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: John Ettedgui <john.ettedgui@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: hda - Fix beep-tone on IDT 92HD87/88 codecsTakashi Iwai2010-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It sounds like a non-linear beep tone on my test machines... Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: hda - Enable beep for IDT92HD87 / 88 codecsTakashi Iwai2010-12-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These codecs have the digital beep widget in NID 0x21. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | ALSA: hda - Clean up cxt5066 port-D handling & coTakashi Iwai2010-12-031-14/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of hard-coded magic numbers, properly define and use macros for improve the readability. Also, dell_automute is handled samely as thinkpad, since it also sets port_d_mode, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-12-033-15/+19
| | |\ \ \ \ \
| | * | | | | | ALSA: hda - Remove dead md2 quirk codeTakashi Iwai2010-11-291-40/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | Merge branch 'fix/hda' into topic/hdaTakashi Iwai2010-11-293-18/+64
| | |\ \ \ \ \ \
| | * | | | | | | ALSA: hda - Add a generic fixup callback for Realtek codecsTakashi Iwai2010-11-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a generic callback function for fixup elements. This can be used to do some unusual things like overriding the AMP cache, etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
| * | | | | | | | Merge branch 'topic/misc' into for-linusTakashi Iwai2011-01-1330-991/+2556
| |\ \ \ \ \ \ \ \ | | |_|_|_|_|_|/ / | |/| | | | | | |
| | * | | | | | | ALSA: oxygen: fix Xonar DG inputClemens Ladisch2011-01-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently, this card uses the other I2S input. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: add S/PDIF source selection for Claro cardsClemens Ladisch2011-01-111-4/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a mixer control to switch between the optical and coaxial S/PDIF inputs on the HT-Omega Claro and Claro halo cards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: fix CD/MIDI for X-Meridian (2G)Clemens Ladisch2011-01-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the X-Meridian's CD input and the X-Meridian 2G's potential MIDI ports. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: include delay.h for msleep in Xonar DG supportStephen Rothwell2011-01-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: add some card namesClemens Ladisch2011-01-101-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of the generic Oxygen, use the actual card name, if known. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: do not show chip revision in card longnameClemens Ladisch2011-01-102-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently, the revision is 2 on all sold sound cards, so this information is not actually useful. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: X-Meridian: add S/PDIF source selectionClemens Ladisch2011-01-101-2/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a mixer control to select between the on-board and extension board S/PDIF inputs for the X-Meridian (2G). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: add digital input validity check switchClemens Ladisch2011-01-101-10/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a mixer control to prevent capturing S/PDIF samples that are not marked as valid (non-audio or corrupted samples). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: ymfpci: use enum control info helperClemens Ladisch2011-01-101-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the info callback by using the snd_ctl_enum_info() helper function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: cmipci: use enum control info helperClemens Ladisch2011-01-101-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify info callbacks by using the snd_ctl_enum_info() helper function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: bt87x: use enum control info helperClemens Ladisch2011-01-101-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Simplify the info callback by using the snd_ctl_enum_info() helper function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: core, oxygen, virtuoso: add an enum control info helperClemens Ladisch2011-01-106-102/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the helper function snd_ctl_enum_info() to fill out the elem_info fields for an enumerated control. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: add Xonar HDAV1.3 Slim supportClemens Ladisch2011-01-104-16/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add experimental support for the Asus Xonar HDAV1.3 Slim sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: add Xonar DG supportClemens Ladisch2011-01-107-5/+733
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add experimental support for the Asus Xonar DG sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: add X-Meridian 2G supportClemens Ladisch2011-01-102-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the AuzenTech X-Meridian 7.1 2G sound card. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: add more PCI IDsClemens Ladisch2011-01-101-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add PCI IDs for some unknown models. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: reduce MCLK in double rate modesClemens Ladisch2011-01-103-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the CSxxxx and AKxxxx DAC/ADC chips, the MCLK factor in double rate modes (64-96 kHz) can be reduced to 128x without reducing sound quality. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: simplify model-specific MCLK handlingClemens Ladisch2011-01-108-95/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the get_i2s_mclk callback with tables of MCLK values. This simplifies the MCLK-handling code in both the framework and the model- specific drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: use headphone gain setting only on front DACClemens Ladisch2011-01-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Do not apply the headphone gain offset to any but the front DAC. These DACs would not be used in headphone mode, so this saves a few register writes. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: handle DAC oversampling automaticallyClemens Ladisch2011-01-101-79/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the DAC Oversampling mixer control because this setting does not make much sense. For cards with the H6 daughterboard, 128x oversampling was disabled anyway because these high MCLK frequency would not be compatible with the connector cable. For cards without the H6 daughterboard, 128x gives a slightly higher output quality; there is no reason to reduce it to 64x except for saving power, but then these cards have not been designed to be power efficient anyway (the D2's blinkenlights cannot be disabled). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: use lower master clock with H6 daughterboardClemens Ladisch2011-01-101-13/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of the unshielded connector cable, it is important to use as low a master clock frequency as possible with the H6. For double rate modes (64-96 kHz), the MCLK rate is unconditionally lowered from 512x to 256x because the higher rate would not improve anything. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: configure correct master clock frequency on the CS2000Clemens Ladisch2011-01-101-13/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock output of the CS2000, which is used as master clock for the DACs, was using half the actual master clock frequency for some reason. Using the theoretically correct frequency seems also to work in practice. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: remove non-working controls on Essence ST DeluxeClemens Ladisch2011-01-101-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the Xonar Essence ST Deluxe, remove all mixer controls that would require I2C communication with the third DAC, which does not work because of an addressing conflict with the CS2000 chip. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: change PCM1796 format to I2SClemens Ladisch2011-01-101-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the PCM format used for the PCM1796 from left-justified to I2S to ensure that the correct format is used even for the Essence ST Deluxe's center/LFE DAC, where I2C does not work because of an address conflict with the CS2000 chip. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: wait for PCM1796 clock to become stableClemens Ladisch2011-01-101-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCM1796 needs the master clock for I2C communication to work, so add delays after clock changes to ensure that the clock is stable when we try to write the DACs' registers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: virtuoso: do not use fast I2C speedClemens Ladisch2011-01-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To make the I2C communication reliable when using the H6 daughterboard, reduce the I2C clock frequency. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: fix SPI clocks slower than 6.25 MHzClemens Ladisch2011-01-102-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix wrong register bits for SPI clock cycle times longer than 160 ns, and adjust the polling loop timeout for these speeds. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: remove oxygen_model::private_data fieldClemens Ladisch2011-01-102-5/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The number of DACs can now be deduced from the dac_channels_mixer field, so the private_data field is no longer needed. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: oxygen: allow different number of PCM and mixer channelsClemens Ladisch2011-01-107-15/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For cards like the Xonar HDAV1.3, differentiate between the number of PCM channels that can be played and the number of channels whose volume can be adjusted. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: azt3328: improve snd_azf3328_codec_setdmaa()Andreas Mohr2011-01-021-15/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - add some WARN_ONCE - add multi-I/O helper (and use helper struct) - fix off-by-1 DMA length bug - better variable naming Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: azt3328: use proper private_data hookup for codec identificationAndreas Mohr2011-01-021-144/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - much improved implementation due to clean codec hierarchy - preparation for potential per-codec spinlock change NOTE: additionally removes a chip->pcm[codec_type] NULL ptr check (due to it requiring access to external chip struct), however I believe this to be ok since this condition should not occur and most drivers don't check against that either. Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: azt3328: use a helper variable to remove one indirection in hotpathAndreas Mohr2011-01-021-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: azt3328: cosmetics: use a helper variable for codec setupAndreas Mohr2011-01-021-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: azt3328: _setfmt() updateAndreas Mohr2011-01-021-16/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - use a separate variable for the frequency part, don't always "or" it - use a "clever"(?) macro to shorten the code Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
| | * | | | | | | ALSA: azt3328: cosmetics, minor updatesAndreas Mohr2011-01-021-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - correct samples to be POSIX shell compatible - add logging of jiffies value in _pointer() - several comments - cleanup Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.1 at 2025-01-28 02:39:06 +0000