From 22de4e1fe446794acaebdf19dcaff4256d659972 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Fri, 19 Nov 2010 07:23:17 +0000 Subject: ARM: mach-shmobile: ap4evb: FSI clock use proper process for ak4642 Current AP4 FSI didn't use set_rate for ak4642, and used dummy rate when init. And FSI driver was modified to always call set_rate. The user which are using FSI set_rate is only AP4 now. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 96 ++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 61c1068..e084b42 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -575,7 +575,7 @@ static int __fsi_set_rate(struct clk *clk, long rate, int enable) return ret; if (enable) { - ret = clk_set_rate(clk, clk_round_rate(clk, rate)); + ret = clk_set_rate(clk, rate); if (0 == ret) ret = clk_enable(clk); } else { @@ -585,7 +585,56 @@ static int __fsi_set_rate(struct clk *clk, long rate, int enable) return ret; } -static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +static int __fsi_set_round_rate(struct clk *clk, long rate, int enable) +{ + return __fsi_set_rate(clk, clk_round_rate(clk, rate), enable); +} + +static int fsi_ak4642_set_rate(struct device *dev, int rate, int enable) +{ + struct clk *fsia_ick; + struct clk *fsiack; + int ret = -EIO; + + fsia_ick = clk_get(dev, "icka"); + if (IS_ERR(fsia_ick)) + return PTR_ERR(fsia_ick); + + /* + * FSIACK is connected to AK4642, + * and use external clock pin from it. + * it is parent of fsia_ick now. + */ + fsiack = clk_get_parent(fsia_ick); + if (!fsiack) + goto fsia_ick_out; + + /* + * we get 1/1 divided clock by setting same rate to fsiack and fsia_ick + * + ** FIXME ** + * Because the freq_table of external clk (fsiack) are all 0, + * the return value of clk_round_rate became 0. + * So, it use __fsi_set_rate here. + */ + ret = __fsi_set_rate(fsiack, rate, enable); + if (ret < 0) + goto fsiack_out; + + ret = __fsi_set_round_rate(fsia_ick, rate, enable); + if ((ret < 0) && enable) + __fsi_set_round_rate(fsiack, rate, 0); /* disable FSI ACK */ + +fsiack_out: + clk_put(fsiack); + +fsia_ick_out: + clk_put(fsia_ick); + + return 0; +} + +static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable) { struct clk *fsib_clk; struct clk *fdiv_clk = &sh7372_fsidivb_clk; @@ -594,10 +643,6 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) int ackmd_bpfmd; int ret; - /* set_rate is not needed if port A */ - if (is_porta) - return 0; - switch (rate) { case 44100: fsib_rate = rate * 256; @@ -618,23 +663,35 @@ static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) if (IS_ERR(fsib_clk)) return -EIO; - ret = __fsi_set_rate(fsib_clk, fsib_rate, enable); + ret = __fsi_set_round_rate(fsib_clk, fsib_rate, enable); clk_put(fsib_clk); if (ret < 0) return ret; /* FSI DIV setting */ - ret = __fsi_set_rate(fdiv_clk, fdiv_rate, enable); + ret = __fsi_set_round_rate(fdiv_clk, fdiv_rate, enable); if (ret < 0) { /* disable FSI B */ if (enable) - __fsi_set_rate(fsib_clk, fsib_rate, 0); + __fsi_set_round_rate(fsib_clk, fsib_rate, 0); return ret; } return ackmd_bpfmd; } +static int fsi_set_rate(struct device *dev, int is_porta, int rate, int enable) +{ + int ret; + + if (is_porta) + ret = fsi_ak4642_set_rate(dev, rate, enable); + else + ret = fsi_hdmi_set_rate(dev, rate, enable); + + return ret; +} + static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | @@ -928,23 +985,11 @@ out: device_initcall(hdmi_init_pm_clock); -#define FSIACK_DUMMY_RATE 48000 static int __init fsi_init_pm_clock(void) { struct clk *fsia_ick; int ret; - /* - * FSIACK is connected to AK4642, - * and the rate is depend on playing sound rate. - * So, set dummy rate (= 48k) here - */ - ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); - if (ret < 0) { - pr_err("Cannot set FSIACK dummy rate: %d\n", ret); - return ret; - } - fsia_ick = clk_get(&fsi_device.dev, "icka"); if (IS_ERR(fsia_ick)) { ret = PTR_ERR(fsia_ick); @@ -953,16 +998,9 @@ static int __init fsi_init_pm_clock(void) } ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); - if (ret < 0) { - pr_err("Cannot set FSI-A parent: %d\n", ret); - goto out; - } - - ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); if (ret < 0) - pr_err("Cannot set FSI-A rate: %d\n", ret); + pr_err("Cannot set FSI-A parent: %d\n", ret); -out: clk_put(fsia_ick); return ret; -- cgit v1.1