From efba2e313ea1b1bd69a7c4659263becf43bb1adc Mon Sep 17 00:00:00 2001 From: Antony Pavlov Date: Fri, 11 Feb 2011 13:00:37 +0300 Subject: mtd: jedec_probe: Change variable name from cfi_p to cfi In the following commit, we'll need to use the CMD() macro in order to fix the initialisation of the sector_erase_cmd field. That requires the local variable to be called 'cfi', so change it first in a simple patch. Signed-off-by: Antony Pavlov Acked-by: Guillaume LECERF Signed-off-by: David Woodhouse CC: stable@kernel.org --- drivers/mtd/chips/jedec_probe.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers/mtd') diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c index d72a5fb..7bedbb9 100644 --- a/drivers/mtd/chips/jedec_probe.c +++ b/drivers/mtd/chips/jedec_probe.c @@ -1935,14 +1935,14 @@ static void jedec_reset(u32 base, struct map_info *map, struct cfi_private *cfi) } -static int cfi_jedec_setup(struct cfi_private *p_cfi, int index) +static int cfi_jedec_setup(struct cfi_private *cfi, int index) { int i,num_erase_regions; uint8_t uaddr; - if (! (jedec_table[index].devtypes & p_cfi->device_type)) { + if (!(jedec_table[index].devtypes & cfi->device_type)) { DEBUG(MTD_DEBUG_LEVEL1, "Rejecting potential %s with incompatible %d-bit device type\n", - jedec_table[index].name, 4 * (1<device_type)); + jedec_table[index].name, 4 * (1<device_type)); return 0; } @@ -1950,27 +1950,27 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index) num_erase_regions = jedec_table[index].nr_regions; - p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); - if (!p_cfi->cfiq) { + cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL); + if (!cfi->cfiq) { //xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name); return 0; } - memset(p_cfi->cfiq,0,sizeof(struct cfi_ident)); + memset(cfi->cfiq, 0, sizeof(struct cfi_ident)); - p_cfi->cfiq->P_ID = jedec_table[index].cmd_set; - p_cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions; - p_cfi->cfiq->DevSize = jedec_table[index].dev_size; - p_cfi->cfi_mode = CFI_MODE_JEDEC; + cfi->cfiq->P_ID = jedec_table[index].cmd_set; + cfi->cfiq->NumEraseRegions = jedec_table[index].nr_regions; + cfi->cfiq->DevSize = jedec_table[index].dev_size; + cfi->cfi_mode = CFI_MODE_JEDEC; for (i=0; icfiq->EraseRegionInfo[i] = jedec_table[index].regions[i]; + cfi->cfiq->EraseRegionInfo[i] = jedec_table[index].regions[i]; } - p_cfi->cmdset_priv = NULL; + cfi->cmdset_priv = NULL; /* This may be redundant for some cases, but it doesn't hurt */ - p_cfi->mfr = jedec_table[index].mfr_id; - p_cfi->id = jedec_table[index].dev_id; + cfi->mfr = jedec_table[index].mfr_id; + cfi->id = jedec_table[index].dev_id; uaddr = jedec_table[index].uaddr; @@ -1978,8 +1978,8 @@ static int cfi_jedec_setup(struct cfi_private *p_cfi, int index) our brains explode when we see the datasheets talking about address lines numbered from A-1 to A18. The CFI table has unlock addresses in device-words according to the mode the device is connected in */ - p_cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / p_cfi->device_type; - p_cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / p_cfi->device_type; + cfi->addr_unlock1 = unlock_addrs[uaddr].addr1 / cfi->device_type; + cfi->addr_unlock2 = unlock_addrs[uaddr].addr2 / cfi->device_type; return 1; /* ok */ } -- cgit v1.1