From 0330dba36127768a2e2df2eabb902b5530102871 Mon Sep 17 00:00:00 2001 From: jack wang Date: Mon, 7 Dec 2009 17:46:22 +0800 Subject: [SCSI] pm8001: set SSC down-spreading only to get less errors on some 6G device. Signed-off-by: Jack Wang Signed-off-by: James Bottomley --- drivers/scsi/pm8001/pm8001_hwi.c | 65 +++++++++++++--------------------------- 1 file changed, 21 insertions(+), 44 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c index b4426b5..6e1bdd8 100644 --- a/drivers/scsi/pm8001/pm8001_hwi.c +++ b/drivers/scsi/pm8001/pm8001_hwi.c @@ -373,10 +373,7 @@ static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue) static void __devinit mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) { - u32 offset; - u32 value; - u32 i, j; - u32 bit_cnt; + u32 value, offset, i; #define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000 #define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000 @@ -392,55 +389,35 @@ mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit) */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR)) return; - /* set SSC bit of PHY 0 - 3 */ + for (i = 0; i < 4; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i; - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } - /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */ if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR)) return; - - /* set SSC bit of PHY 4 - 7 */ for (i = 4; i < 8; i++) { offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4); - value = pm8001_cr32(pm8001_ha, 2, offset); - if (SSCbit) { - value |= 0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT); - } else { - value |= 0x00000001 << PHY_G3_WITHOUT_SSC_BIT_SHIFT; - value &= ~(0x00000001 << PHY_G3_WITH_SSC_BIT_SHIFT); - } - bit_cnt = 0; - for (j = 0; j < 31; j++) - if ((value >> j) & 0x00000001) - bit_cnt++; - if (bit_cnt % 2) - value &= ~(0x00000001 << SNW3_PHY_CAPABILITIES_PARITY); - else - value |= 0x00000001 << SNW3_PHY_CAPABILITIES_PARITY; - - pm8001_cw32(pm8001_ha, 2, offset, value); + pm8001_cw32(pm8001_ha, 2, offset, 0x80001501); } + /************************************************************* + Change the SSC upspreading value to 0x0 so that upspreading is disabled. + Device MABC SMOD0 Controls + Address: (via MEMBASE-III): + Using shifted destination address 0x0_0000: with Offset 0xD8 + + 31:28 R/W Reserved Do not change + 27:24 R/W SAS_SMOD_SPRDUP 0000 + 23:20 R/W SAS_SMOD_SPRDDN 0000 + 19:0 R/W Reserved Do not change + Upon power-up this register will read as 0x8990c016, + and I would like you to change the SAS_SMOD_SPRDUP bits to 0b0000 + so that the written value will be 0x8090c016. + This will ensure only down-spreading SSC is enabled on the SPC. + *************************************************************/ + value = pm8001_cr32(pm8001_ha, 2, 0xd8); + pm8001_cw32(pm8001_ha, 2, 0xd8, 0x8000C016); /*set the shifted destination address to 0x0 to avoid error operation */ bar4_shift(pm8001_ha, 0x0); -- cgit v1.1