From 84f57fbc724e3b56dc87c37dddac89f82cf75ef6 Mon Sep 17 00:00:00 2001 From: Narendra Sankar Date: Thu, 18 Aug 2005 22:30:35 +0200 Subject: [PATCH] serverworks: add support for new southbridge IDE BCM5785 (HT1000) is a Opteron Southbridge from Serverworks/Broadcom that incorporates a single channel ATA100 IDE controller that is functionally identical to the Serverworks CSB6 IDE controller. This patch adds support for the new PCI device ID and also the support for this controller. Signed-off-by: Narendra Sankar Acked-by: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/serverworks.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index c6f5fa4..ff2e217 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -21,6 +21,9 @@ * * CSB6: `Champion South Bridge' IDE Interface (optional: third channel) * + * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE + * controller same as the CSB6. Single channel ATA100 only. + * * Documentation: * Available under NDA only. Errata info very hard to get. * @@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive) if (!svwks_revision) pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision); + if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) + return 2; if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { u32 reg = 0; if (isa_dev) @@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev) case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE: case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE: case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2: + case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE: return 1; default: break; @@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2; pci_write_config_byte(dev, 0x5A, btr); } + /* Setup HT1000 SouthBridge Controller - Single Channel Only */ + else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { + pci_read_config_byte(dev, 0x5A, &btr); + btr &= ~0x40; + btr |= 0x3; + pci_write_config_byte(dev, 0x5A, btr); + } return (dev->irq) ? dev->irq : 0; } @@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = { .channels = 1, /* 2 */ .autodma = AUTODMA, .bootable = ON_BOARD, + },{ /* 4 */ + .name = "SvrWks HT1000", + .init_setup = init_setup_svwks, + .init_chipset = init_chipset_svwks, + .init_hwif = init_hwif_svwks, + .init_dma = init_dma_svwks, + .channels = 1, /* 2 */ + .autodma = AUTODMA, + .bootable = ON_BOARD, } }; @@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = { { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { 0, }, }; MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); -- cgit v1.1