From 0f1312b260499b34bb92fc9bd8ca1560dda2c4da Mon Sep 17 00:00:00 2001
From: Maurus Cuelenaere <mcuelenaere@gmail.com>
Date: Fri, 13 Aug 2010 21:29:30 +0200
Subject: USB: s3c-hsotg: Remove DEBUG define
DEBUG is defined unconditionally, remove it as this clutters the message log.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/s3c-hsotg.c | 2 --
1 file changed, 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index 521ebed..a229744 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -12,8 +12,6 @@
* published by the Free Software Foundation.
*/
-#define DEBUG
-
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
--
cgit v1.1
From 08a3b3b1c2e622e378d9086aee9e2e42ce37591d Mon Sep 17 00:00:00 2001
From: Dan Carpenter <error27@gmail.com>
Date: Sat, 14 Aug 2010 11:06:19 +0200
Subject: USB: ehci-ppc-of: problems in unwind
The iounmap(ehci->ohci_hcctrl_reg); should be the first thing we do
because the ioremap() was the last thing we did. Also if we hit any of
the goto statements in the original code then it would have led to a
NULL dereference of "ehci". This bug was introduced in: 796bcae7361c
"USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]"
I modified the few lines in front a little so that my code didn't
obscure the return success code path.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/host/ehci-ppc-of.c | 12 +++++++-----
1 file changed, 7 insertions(+), 5 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index 335ee69..ba52be4 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -192,17 +192,19 @@ ehci_hcd_ppc_of_probe(struct platform_device *op, const struct of_device_id *mat
}
rv = usb_add_hcd(hcd, irq, 0);
- if (rv == 0)
- return 0;
+ if (rv)
+ goto err_ehci;
+
+ return 0;
+err_ehci:
+ if (ehci->has_amcc_usb23)
+ iounmap(ehci->ohci_hcctrl_reg);
iounmap(hcd->regs);
err_ioremap:
irq_dispose_mapping(irq);
err_irq:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-
- if (ehci->has_amcc_usb23)
- iounmap(ehci->ohci_hcctrl_reg);
err_rmr:
usb_put_hcd(hcd);
--
cgit v1.1
From 793f03aa7bda8f492e12ada3de711b4ad7f4d8d0 Mon Sep 17 00:00:00 2001
From: Henrik Kretzschmar <henne@nachtwindheim.de>
Date: Fri, 20 Aug 2010 19:57:50 +0200
Subject: USB: rndis: section mismatch fix
This patch removes the following section mismatch warning,
by moving the function rndis_init() from .init.text to .text.
WARNING: vmlinux.o(.text+0x1aeca5a): Section mismatch in reference from the function rndis_bind_config() to the function .init.text:rndis_init()
The function rndis_bind_config() references
the function __init rndis_init().
This is often because rndis_bind_config lacks a __init
annotation or the annotation of rndis_init is wrong.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/rndis.c | 2 +-
drivers/usb/gadget/rndis.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 020fa5a..ee337f7 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -1148,7 +1148,7 @@ static struct proc_dir_entry *rndis_connect_state [RNDIS_MAX_CONFIGS];
#endif /* CONFIG_USB_GADGET_DEBUG_FILES */
-int __init rndis_init (void)
+int rndis_init(void)
{
u8 i;
diff --git a/drivers/usb/gadget/rndis.h b/drivers/usb/gadget/rndis.h
index c236aaa..907c330 100644
--- a/drivers/usb/gadget/rndis.h
+++ b/drivers/usb/gadget/rndis.h
@@ -262,7 +262,7 @@ int rndis_signal_disconnect (int configNr);
int rndis_state (int configNr);
extern void rndis_set_host_mac (int configNr, const u8 *addr);
-int __devinit rndis_init (void);
+int rndis_init(void);
void rndis_exit (void);
#endif /* _LINUX_RNDIS_H */
--
cgit v1.1
From 037d3656adbd7e8cb848f01cf5dec423ed76bbe7 Mon Sep 17 00:00:00 2001
From: Maxim Osipov <maxim.osipov@gmail.com>
Date: Sat, 21 Aug 2010 14:54:06 +0400
Subject: USB: Fix kernel oops with g_ether and Windows
Please find attached patch for
https://bugzilla.kernel.org/show_bug.cgi?id=16023 problem.
Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/gadget/rndis.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index ee337f7..972d5dd 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -293,9 +293,13 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
/* mandatory */
case OID_GEN_VENDOR_DESCRIPTION:
pr_debug("%s: OID_GEN_VENDOR_DESCRIPTION\n", __func__);
- length = strlen (rndis_per_dev_params [configNr].vendorDescr);
- memcpy (outbuf,
- rndis_per_dev_params [configNr].vendorDescr, length);
+ if ( rndis_per_dev_params [configNr].vendorDescr ) {
+ length = strlen (rndis_per_dev_params [configNr].vendorDescr);
+ memcpy (outbuf,
+ rndis_per_dev_params [configNr].vendorDescr, length);
+ } else {
+ outbuf[0] = 0;
+ }
retval = 0;
break;
--
cgit v1.1
From c7aa8f44b4d1dc73591894a2dd6909213612d299 Mon Sep 17 00:00:00 2001
From: Dirk De Schepper <ddeschepper@nvtl.com>
Date: Tue, 24 Aug 2010 20:38:35 +0100
Subject: USB: option: fix incorrect novatel entries
Unfortunately some of the hardware PID belonging to auto-install CDROM
(AICD) of Novatel modems found their way into the option module. This
causes the AICD to be treated as a modem in stead of a disk. Since the
modem ports do not appear until after the AICD is ejected, this
essentially disables the modem. After a couple of minutes the AICD
should auto-eject, but it is just too long a wait. The frequency of the
failure seems to depend on both the hardware and the linux distribution.
Here is a patch that fixes this up, and also adds a couple of new PID,
offering some explanations and removing some incomplete and unnecessary
comments.
Signed-off-by: Dirk De Schepper <ddeschepper@nvtl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/option.c | 119 ++++++++++++++++++++++++++++----------------
1 file changed, 75 insertions(+), 44 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index adcbdb9..c46911a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -164,6 +164,14 @@ static void option_instat_callback(struct urb *urb);
#define YISO_VENDOR_ID 0x0EAB
#define YISO_PRODUCT_U893 0xC893
+/*
+ * NOVATEL WIRELESS PRODUCTS
+ *
+ * Note from Novatel Wireless:
+ * If your Novatel modem does not work on linux, don't
+ * change the option module, but check our website. If
+ * that does not help, contact ddeschepper@nvtl.com
+*/
/* MERLIN EVDO PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_V640 0x1100
#define NOVATELWIRELESS_PRODUCT_V620 0x1110
@@ -185,24 +193,39 @@ static void option_instat_callback(struct urb *urb);
#define NOVATELWIRELESS_PRODUCT_EU730 0x2400
#define NOVATELWIRELESS_PRODUCT_EU740 0x2410
#define NOVATELWIRELESS_PRODUCT_EU870D 0x2420
-
/* OVATION PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
-#define NOVATELWIRELESS_PRODUCT_U727 0x5010
-#define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100
-#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
+/*
+ * Note from Novatel Wireless:
+ * All PID in the 5xxx range are currently reserved for
+ * auto-install CDROMs, and should not be added to this
+ * module.
+ *
+ * #define NOVATELWIRELESS_PRODUCT_U727 0x5010
+ * #define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100
+*/
#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002
-
-/* FUTURE NOVATEL PRODUCTS */
-#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
-#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0X7000
-#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0X7001
-#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED 0X8000
-#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0X8001
-#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0X9000
-#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0X9001
-#define NOVATELWIRELESS_PRODUCT_GLOBAL 0XA001
+#define NOVATELWIRELESS_PRODUCT_MC780 0x6010
+#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0x6000
+#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0x6001
+#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0x7000
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0x7001
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3 0x7003
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4 0x7004
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5 0x7005
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED6 0x7006
+#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED7 0x7007
+#define NOVATELWIRELESS_PRODUCT_MC996D 0x7030
+#define NOVATELWIRELESS_PRODUCT_MF3470 0x7041
+#define NOVATELWIRELESS_PRODUCT_MC547 0x7042
+#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED 0x8000
+#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0x8001
+#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0x9000
+#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0x9001
+#define NOVATELWIRELESS_PRODUCT_G1 0xA001
+#define NOVATELWIRELESS_PRODUCT_G1_M 0xA002
+#define NOVATELWIRELESS_PRODUCT_G2 0xA010
/* AMOI PRODUCTS */
#define AMOI_VENDOR_ID 0x1614
@@ -490,36 +513,44 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_ETS1220, 0xff, 0xff, 0xff) },
{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, /* Novatel Merlin EX720/V740/X720 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) }, /* Novatel Merlin V720/S720/PC720 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) }, /* Novatel U730/U740 (VF version) */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) }, /* Novatel U740 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) }, /* Novatel U870 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) }, /* Novatel Merlin XU870 HSDPA/3G */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) }, /* Novatel X950D */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) }, /* Novatel EV620/ES620 CDMA/EV-DO */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) }, /* Novatel ES620/ES720/U720/USB720 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) }, /* Novatel E725/E726 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) }, /* Novatel Merlin ES620 SM Bus */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) }, /* Novatel EU730 and Vodafone EU740 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) }, /* Novatel non-Vodafone EU740 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, /* Novatel EVDO product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, /* Novatel HSPA product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, /* Novatel EVDO Embedded product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, /* Novatel HSPA Embedded product */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL) }, /* Novatel Global product */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V720) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U730) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U740) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U870) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_XU870) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_X950D) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EV620) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES720) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_E725) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_ES620) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU730) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU740) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC780) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED3) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED4) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED5) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED6) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED7) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC996D) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MF3470) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC547) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G1_M) },
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_G2) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) },
--
cgit v1.1
From 541e05ec3add5ab5bcf238d60161b53480280b20 Mon Sep 17 00:00:00 2001
From: Craig Shelley <craig@microtron.org.uk>
Date: Mon, 23 Aug 2010 20:50:57 +0100
Subject: USB: CP210x Add new device ID
New device ID added for Balluff RFID reader.
Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/cp210x.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 80bf833..103f9d2 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -109,6 +109,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */
@@ -122,14 +123,14 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
- { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
- { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
- { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
- { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ USB_DEVICE(0x16DC, 0x0010) }, /* W-IE-NE-R Plein & Baus GmbH PL512 Power Supply */
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
+ { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
+ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
--
cgit v1.1
From 0bf7a81c5d447c21db434be35363c44c0a30f598 Mon Sep 17 00:00:00 2001
From: Jason Detring <jason.detring@navico.com>
Date: Thu, 26 Aug 2010 15:08:54 -0500
Subject: USB: cp210x: Add B&G H3000 link cable ID
This is the cable between an H3000 navigation unit and a multi-function display.
http://www.bandg.com/en/Products/H3000/Spares-and-Accessories/Cables/H3000-CPU-USB-Cable-Pack/
Signed-off-by: Jason Detring <jason.detring@navico.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'drivers')
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 103f9d2..8ed6ff6 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -88,6 +88,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x10C4, 0x8149) }, /* West Mountain Radio Computerized Battery Analyzer */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x818B) }, /* AVIT Research USB to TTL */
{ USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
--
cgit v1.1
From 5b22a32e76defeb573991b301a27d299472c5714 Mon Sep 17 00:00:00 2001
From: A E Lawrence <lawrence_a_e@ntlworld.com>
Date: Sun, 29 Aug 2010 21:51:52 +0100
Subject: USB: cp210x usb driver: add USB_DEVICE for Pirelli DP-L10 mobile.
The Pirelli DP-L10 mobile is sold under various brand names. One, already
supported by cp210x, is the T-COM TC300. Here is the lsusb for that version:
-------------------------------------------------------------------
Bus 001 Device 002: ID 0489:e000 Foxconn / Hon Hai T-Com TC 300
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0489 Foxconn / Hon Hai
idProduct 0xe000 T-Com TC 300
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 TC 300
iSerial 3 0001
[snip]
---------------------------------------------------------------------------
However the native Pirelli DP-L10 is not supported:
------------------------------------------------------------------
Bus 001 Device 003: ID 0489:e003 Foxconn / Hon Hai Pirelli DP-L10
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0489 Foxconn / Hon Hai
idProduct 0xe003 Pirelli DP-L10
bcdDevice 1.00
iManufacturer 1 Silicon Labs
iProduct 2 DP-L10
iSerial 3 0001
[snip]
-------------------------------------------------------------------------
All that is required is an extra USB_DEVICE entry:
{ USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM
+Mobile */
The patch adds that entry. Tested under 2.6.36-rc2 from git.
Signed-off-by: A E Lawrence <lawrence_a_e@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
(limited to 'drivers')
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 8ed6ff6..4f1744c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -56,6 +56,7 @@ static int debug;
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
{ USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x0489, 0xE003) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
{ USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
--
cgit v1.1
From 0791971ba8fbc44e4f476079f856335ed45e6324 Mon Sep 17 00:00:00 2001
From: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Date: Sat, 28 Aug 2010 03:06:29 -0300
Subject: usb: allow drivers to use allocated bandwidth until unbound
When using the remove sysfs file, the device configuration is set to -1
(unconfigured). This eventually unbind drivers with the bandwidth_mutex
held. Some drivers may call functions that hold said mutex, like
usb_reset_device. This is the case for rtl8187, for example. This will
lead to the same process holding the mutex twice, which deadlocks.
Besides, according to Alan Stern:
"The deadlock problem probably could be handled somehow, but there's a
separate issue: Until the usb_disable_device call finishes unbinding
the drivers, the drivers are free to continue using their allocated
bandwidth. We musn't change the bandwidth allocations until after the
unbinding is done. So this patch is indeed necessary."
Unbinding the driver before holding the bandwidth_mutex solves the
problem. If any operation after that fails, drivers are not bound again.
But that would be a problem anyway that the user may solve resetting the
device configuration to one that works, just like he would need to do in
most other failure cases.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/core/message.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index fd4c36e..844683e 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1724,6 +1724,15 @@ free_interfaces:
if (ret)
goto free_interfaces;
+ /* if it's already configured, clear out old state first.
+ * getting rid of old interfaces means unbinding their drivers.
+ */
+ if (dev->state != USB_STATE_ADDRESS)
+ usb_disable_device(dev, 1); /* Skip ep0 */
+
+ /* Get rid of pending async Set-Config requests for this device */
+ cancel_async_set_config(dev);
+
/* Make sure we have bandwidth (and available HCD resources) for this
* configuration. Remove endpoints from the schedule if we're dropping
* this configuration to set configuration 0. After this point, the
@@ -1733,20 +1742,11 @@ free_interfaces:
mutex_lock(&hcd->bandwidth_mutex);
ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
if (ret < 0) {
- usb_autosuspend_device(dev);
mutex_unlock(&hcd->bandwidth_mutex);
+ usb_autosuspend_device(dev);
goto free_interfaces;
}
- /* if it's already configured, clear out old state first.
- * getting rid of old interfaces means unbinding their drivers.
- */
- if (dev->state != USB_STATE_ADDRESS)
- usb_disable_device(dev, 1); /* Skip ep0 */
-
- /* Get rid of pending async Set-Config requests for this device */
- cancel_async_set_config(dev);
-
ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0, configuration, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
@@ -1761,8 +1761,8 @@ free_interfaces:
if (!cp) {
usb_set_device_state(dev, USB_STATE_ADDRESS);
usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
- usb_autosuspend_device(dev);
mutex_unlock(&hcd->bandwidth_mutex);
+ usb_autosuspend_device(dev);
goto free_interfaces;
}
mutex_unlock(&hcd->bandwidth_mutex);
--
cgit v1.1
From 3c35b002da0c749ec15cf25cfe58f06aa230ae9c Mon Sep 17 00:00:00 2001
From: Bill Pemberton <wfp5p@virginia.edu>
Date: Wed, 25 Aug 2010 18:21:23 -0400
Subject: USB: ssu100: turn off debug flag
Remove the hard coding of the debug flag to 1.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/ssu100.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 68c18fd..e986002 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -46,7 +46,7 @@
#define FULLPWRBIT 0x00000080
#define NEXT_BOARD_POWER_BIT 0x00000004
-static int debug = 1;
+static int debug;
/* Version Information */
#define DRIVER_VERSION "v0.1"
--
cgit v1.1
From caf3a636a9f809fdca5fa746e6687096457accb1 Mon Sep 17 00:00:00 2001
From: Dave Ludlow <dave.ludlow@bay.ws>
Date: Tue, 31 Aug 2010 14:26:17 -0400
Subject: usb: serial: mos7840: Add USB ID to support the B&B Electronics
USOPTL4-2P.
Add the USB ID needed to support B&B Electronic's 2-port, optically-isolated,
powered, USB to RS485 converter.
Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/mos7840.c | 3 +++
1 file changed, 3 insertions(+)
(limited to 'drivers')
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 585b7e6..9a5ea9d 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -129,6 +129,7 @@
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24
+#define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02
/* This driver also supports
* ATEN UC2324 device using Moschip MCS7840
@@ -192,6 +193,7 @@ static const struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
@@ -209,6 +211,7 @@ static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
--
cgit v1.1
From 4035e45632c2a8bb4edae83c20447051bd9a9604 Mon Sep 17 00:00:00 2001
From: Toby Gray <toby.gray@realvnc.com>
Date: Wed, 1 Sep 2010 16:01:19 +0100
Subject: USB: cdc-acm: Adding second ACM channel support for various Nokia and
one Samsung phones
S60 phones from Nokia and Samsung expose two ACM channels. The first is a modem
with a standard AT-command interface, which is picked up correctly by CDC-ACM.
The second ACM port is marked as having a vendor-specific protocol. This means
that the ACM driver will not claim the second channel by default.
This adds support for the second ACM channel for the following devices:
Nokia E63
Nokia E75
Nokia 6760 Slide
Nokia E52
Nokia E55
Nokia E72
Nokia X6
Nokia N97 Mini
Nokia 5800 Xpressmusic
Nokia E90
Samsung GTi8510 (INNOV8)
Signed-off-by: Toby Gray <toby.gray@realvnc.com>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/class/cdc-acm.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
(limited to 'drivers')
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 1833b3a..a3d6c4d 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1481,6 +1481,11 @@ static int acm_reset_resume(struct usb_interface *intf)
USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
USB_CDC_ACM_PROTO_VENDOR)
+#define SAMSUNG_PCSUITE_ACM_INFO(x) \
+ USB_DEVICE_AND_INTERFACE_INFO(0x04e7, x, \
+ USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, \
+ USB_CDC_ACM_PROTO_VENDOR)
+
/*
* USB driver structure.
*/
@@ -1591,6 +1596,17 @@ static const struct usb_device_id acm_ids[] = {
{ NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */
{ NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */
{ NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0178), }, /* Nokia E63 */
+ { NOKIA_PCSUITE_ACM_INFO(0x010e), }, /* Nokia E75 */
+ { NOKIA_PCSUITE_ACM_INFO(0x02d9), }, /* Nokia 6760 Slide */
+ { NOKIA_PCSUITE_ACM_INFO(0x01d0), }, /* Nokia E52 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0223), }, /* Nokia E72 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0275), }, /* Nokia X6 */
+ { NOKIA_PCSUITE_ACM_INFO(0x026c), }, /* Nokia N97 Mini */
+ { NOKIA_PCSUITE_ACM_INFO(0x0154), }, /* Nokia 5800 XpressMusic */
+ { NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
+ { NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
+ { SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
--
cgit v1.1
From 870408c8291015872a7a0b583673a9e56b3e73f4 Mon Sep 17 00:00:00 2001
From: Dave Ludlow <dave.ludlow@bay.ws>
Date: Wed, 1 Sep 2010 12:33:30 -0400
Subject: usb: serial: mos7840: Add USB IDs to support more B&B USB/RS485
converters.
Add the USB IDs needed to support the B&B USOPTL4-4P, USO9ML2-2P, and
USO9ML2-4P. This patch expands and corrects a typo in the patch sent
on 08-31-2010.
Signed-off-by: Dave Ludlow <dave.ludlow@bay.ws>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/mos7840.c | 35 ++++++++++++++++++++++-------------
1 file changed, 22 insertions(+), 13 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 9a5ea9d..1c9b6e9 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -119,17 +119,20 @@
* by making a change here, in moschip_port_id_table, and in
* moschip_id_table_combined
*/
-#define USB_VENDOR_ID_BANDB 0x0856
-#define BANDB_DEVICE_ID_USO9ML2_2 0xAC22
-#define BANDB_DEVICE_ID_USO9ML2_4 0xAC24
-#define BANDB_DEVICE_ID_US9ML2_2 0xAC29
-#define BANDB_DEVICE_ID_US9ML2_4 0xAC30
-#define BANDB_DEVICE_ID_USPTL4_2 0xAC31
-#define BANDB_DEVICE_ID_USPTL4_4 0xAC32
-#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
-#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24
-#define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02
+#define USB_VENDOR_ID_BANDB 0x0856
+#define BANDB_DEVICE_ID_USO9ML2_2 0xAC22
+#define BANDB_DEVICE_ID_USO9ML2_2P 0xBC00
+#define BANDB_DEVICE_ID_USO9ML2_4 0xAC24
+#define BANDB_DEVICE_ID_USO9ML2_4P 0xBC01
+#define BANDB_DEVICE_ID_US9ML2_2 0xAC29
+#define BANDB_DEVICE_ID_US9ML2_4 0xAC30
+#define BANDB_DEVICE_ID_USPTL4_2 0xAC31
+#define BANDB_DEVICE_ID_USPTL4_4 0xAC32
+#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
+#define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02
+#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
+#define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03
+#define BANDB_DEVICE_ID_USOPTL2_4 0xAC24
/* This driver also supports
* ATEN UC2324 device using Moschip MCS7840
@@ -185,15 +188,18 @@ static const struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
@@ -203,15 +209,18 @@ static const struct usb_device_id moschip_id_table_combined[] __devinitconst = {
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
+ {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
- {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4P)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
--
cgit v1.1
From 902ffc3c707c1d459ea57428a619a807cbe412f9 Mon Sep 17 00:00:00 2001
From: Simon Arlott <simon@fire.lp0.eu>
Date: Wed, 1 Sep 2010 18:37:12 +0100
Subject: USB: cxacru: Use a bulk/int URB to access the command endpoint
The command endpoint is either a bulk or interrupt endpoint, but using
the wrong type of transfer causes an error if CONFIG_USB_DEBUG is
enabled after commit f661c6f8c67bd55e93348f160d590ff9edf08904, which
checks for this mismatch.
Detect which type of endpoint it is and use a bulk/int URB as
appropriate. There are other function calls specifying a bulk pipe,
but usb_clear_halt doesn't use the pipe type (only the endpoint) and
usb_bulk_msg auto-detects interrupt transfers.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Cc: stable <stable@kernel.org> [.34 and newer]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/atm/cxacru.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
(limited to 'drivers')
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 593fc5e..5af23cc 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -1127,6 +1127,7 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
{
struct cxacru_data *instance;
struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct usb_host_endpoint *cmd_ep = usb_dev->ep_in[CXACRU_EP_CMD];
int ret;
/* instance init */
@@ -1171,15 +1172,34 @@ static int cxacru_bind(struct usbatm_data *usbatm_instance,
goto fail;
}
- usb_fill_int_urb(instance->rcv_urb,
+ if (!cmd_ep) {
+ dbg("cxacru_bind: no command endpoint");
+ ret = -ENODEV;
+ goto fail;
+ }
+
+ if ((cmd_ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+ == USB_ENDPOINT_XFER_INT) {
+ usb_fill_int_urb(instance->rcv_urb,
usb_dev, usb_rcvintpipe(usb_dev, CXACRU_EP_CMD),
instance->rcv_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->rcv_done, 1);
- usb_fill_int_urb(instance->snd_urb,
+ usb_fill_int_urb(instance->snd_urb,
usb_dev, usb_sndintpipe(usb_dev, CXACRU_EP_CMD),
instance->snd_buf, PAGE_SIZE,
cxacru_blocking_completion, &instance->snd_done, 4);
+ } else {
+ usb_fill_bulk_urb(instance->rcv_urb,
+ usb_dev, usb_rcvbulkpipe(usb_dev, CXACRU_EP_CMD),
+ instance->rcv_buf, PAGE_SIZE,
+ cxacru_blocking_completion, &instance->rcv_done);
+
+ usb_fill_bulk_urb(instance->snd_urb,
+ usb_dev, usb_sndbulkpipe(usb_dev, CXACRU_EP_CMD),
+ instance->snd_buf, PAGE_SIZE,
+ cxacru_blocking_completion, &instance->snd_done);
+ }
mutex_init(&instance->cm_serialize);
--
cgit v1.1
From 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 Mon Sep 17 00:00:00 2001
From: Philippe Corbes <philippe.corbes@gmail.com>
Date: Tue, 31 Aug 2010 19:31:32 +0200
Subject: USB: cdc-acm: Add pseudo modem without AT command capabilities
cdc-acm.c : Manage pseudo-modem without AT commands capabilities
Enable to drive electronic simple gadgets based on microcontrolers.
The Interface descriptor is like this:
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 0 None
Signed-off-by: Philippe Corbes <philippe.corbes@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/class/cdc-acm.c | 4 ++++
1 file changed, 4 insertions(+)
(limited to 'drivers')
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index a3d6c4d..597defc 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1615,6 +1615,10 @@ static const struct usb_device_id acm_ids[] = {
.driver_info = NOT_A_MODEM,
},
+ /* control interfaces without any protocol set */
+ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
+ USB_CDC_PROTO_NONE) },
+
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
USB_CDC_ACM_PROTO_AT_V25TER) },
--
cgit v1.1
From 577045c0a76e34294f902a7d5d60e90b04d094d0 Mon Sep 17 00:00:00 2001
From: Toby Gray <toby.gray@realvnc.com>
Date: Thu, 2 Sep 2010 10:46:20 +0100
Subject: USB: cdc-acm: Fixing crash when ACM probing interfaces with no
endpoint descriptors.
Certain USB devices, such as the Nokia X6 mobile phone, don't expose any
endpoint descriptors on some of their interfaces. If the ACM driver is forced
to probe all interfaces on a device the a NULL pointer dereference will occur
when the ACM driver attempts to use the endpoint of the alternative settings.
One way to get the ACM driver to probe all the interfaces is by using the
/sys/bus/usb/drivers/cdc_acm/new_id interface.
This patch checks that the endpoint pointer for the current alternate settings
is non-NULL before using it.
Signed-off-by: Toby Gray <toby.gray@realvnc.com>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/class/cdc-acm.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
(limited to 'drivers')
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 597defc..bc62fae 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -965,7 +965,8 @@ static int acm_probe(struct usb_interface *intf,
}
if (!buflen) {
- if (intf->cur_altsetting->endpoint->extralen &&
+ if (intf->cur_altsetting->endpoint &&
+ intf->cur_altsetting->endpoint->extralen &&
intf->cur_altsetting->endpoint->extra) {
dev_dbg(&intf->dev,
"Seeking extra descriptors on endpoint\n");
--
cgit v1.1
From 657373883417b2618023fd4135d251ba06a2c30a Mon Sep 17 00:00:00 2001
From: Luke Lowrey <luke@chamsys.co.uk>
Date: Thu, 2 Sep 2010 11:39:49 +0100
Subject: USB: ftdi_sio: Added custom PIDs for ChamSys products
Added the 0xDAF8 to 0xDAFF PID range for ChamSys limited USB interface/wing products
Signed-off-by: Luke Lowrey <luke@chamsys.co.uk>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
drivers/usb/serial/ftdi_sio.c | 8 ++++++++
drivers/usb/serial/ftdi_sio_ids.h | 12 ++++++++++++
2 files changed, 20 insertions(+)
(limited to 'drivers')
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c792c96..97cc87d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -753,6 +753,14 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MIDI_TIMECODE_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MINI_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MAXI_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_MEDIA_WING_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_WING_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 2e95857..15a4583 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -135,6 +135,18 @@
#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
/*
+ * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
+ */
+#define FTDI_CHAMSYS_24_MASTER_WING_PID 0xDAF8
+#define FTDI_CHAMSYS_PC_WING_PID 0xDAF9
+#define FTDI_CHAMSYS_USB_DMX_PID 0xDAFA
+#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
+#define FTDI_CHAMSYS_MINI_WING_PID 0xDAFC
+#define FTDI_CHAMSYS_MAXI_WING_PID 0xDAFD
+#define FTDI_CHAMSYS_MEDIA_WING_PID 0xDAFE
+#define FTDI_CHAMSYS_WING_PID 0xDAFF
+
+/*
* Westrex International devices submitted by Cory Lee
*/
#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
--
cgit v1.1