From 5f2aa25e0e5b221a176ab3d1c51d51da265cb4a7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 17 Jan 2010 15:49:02 +0100 Subject: cfg80211: rcu-ify rdev and wdev Future code will need to look up rdev and wdev within atomic sections, but currently we need to lock a mutex for such lookups. Change the list handling for both to be RCU-safe so that we can look them up in rcu sections instead in the future. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.c | 26 +++++++++++++++----------- net/wireless/core.h | 3 ++- 2 files changed, 17 insertions(+), 12 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/core.c b/net/wireless/core.c index 20db902..d07f57c 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -1,7 +1,7 @@ /* * This is the linux wireless configuration interface. * - * Copyright 2006-2009 Johannes Berg + * Copyright 2006-2010 Johannes Berg */ #include @@ -31,15 +31,10 @@ MODULE_AUTHOR("Johannes Berg"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("wireless configuration support"); -/* RCU might be appropriate here since we usually - * only read the list, and that can happen quite - * often because we need to do it for each command */ +/* RCU-protected (and cfg80211_mutex for writers) */ LIST_HEAD(cfg80211_rdev_list); int cfg80211_rdev_list_generation; -/* - * This is used to protect the cfg80211_rdev_list - */ DEFINE_MUTEX(cfg80211_mutex); /* for debugfs */ @@ -477,7 +472,7 @@ int wiphy_register(struct wiphy *wiphy) /* set up regulatory info */ wiphy_update_regulatory(wiphy, NL80211_REGDOM_SET_BY_CORE); - list_add(&rdev->list, &cfg80211_rdev_list); + list_add_rcu(&rdev->list, &cfg80211_rdev_list); cfg80211_rdev_list_generation++; mutex_unlock(&cfg80211_mutex); @@ -554,7 +549,8 @@ void wiphy_unregister(struct wiphy *wiphy) * it impossible to find from userspace. */ debugfs_remove_recursive(rdev->wiphy.debugfsdir); - list_del(&rdev->list); + list_del_rcu(&rdev->list); + synchronize_rcu(); /* * Try to grab rdev->mtx. If a command is still in progress, @@ -670,7 +666,7 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, INIT_LIST_HEAD(&wdev->event_list); spin_lock_init(&wdev->event_lock); mutex_lock(&rdev->devlist_mtx); - list_add(&wdev->list, &rdev->netdev_list); + list_add_rcu(&wdev->list, &rdev->netdev_list); rdev->devlist_generation++; /* can only change netns with wiphy */ dev->features |= NETIF_F_NETNS_LOCAL; @@ -782,13 +778,21 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, */ if (!list_empty(&wdev->list)) { sysfs_remove_link(&dev->dev.kobj, "phy80211"); - list_del_init(&wdev->list); + list_del_rcu(&wdev->list); rdev->devlist_generation++; #ifdef CONFIG_CFG80211_WEXT kfree(wdev->wext.keys); #endif } mutex_unlock(&rdev->devlist_mtx); + /* + * synchronise (so that we won't find this netdev + * from other code any more) and then clear the list + * head so that the above code can safely check for + * !list_empty() to avoid double-cleanup. + */ + synchronize_rcu(); + INIT_LIST_HEAD(&wdev->list); break; case NETDEV_PRE_UP: if (!(wdev->wiphy->interface_modes & BIT(wdev->iftype))) diff --git a/net/wireless/core.h b/net/wireless/core.h index 2d6a6b9..c326a66 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -1,7 +1,7 @@ /* * Wireless configuration interface internals. * - * Copyright 2006-2009 Johannes Berg + * Copyright 2006-2010 Johannes Berg */ #ifndef __NET_WIRELESS_CORE_H #define __NET_WIRELESS_CORE_H @@ -48,6 +48,7 @@ struct cfg80211_registered_device { /* associate netdev list */ struct mutex devlist_mtx; + /* protected by devlist_mtx or RCU */ struct list_head netdev_list; int devlist_generation; int opencount; /* also protected by devlist_mtx */ -- cgit v1.1 From 27e310c91c3433ab9997b925b3fd65e660634c76 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 19 Jan 2010 10:53:30 -0800 Subject: nl80211: Allow association to change channels during reassociation nl80211_associate() was rejecting (re)association attempts with EBUSY in some cases where we are currently associated with an AP that uses different channel from the destination AP. Fix this by passing the current wdev to rdev_fixed_channel() in the same way that was already done for join-IBSS and connect commands. This allows the fixedchan check to skipped for the current wdev and allows the reassociation to proceed. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'net/wireless') diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 4af7991..5b79ecf 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3571,6 +3571,7 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev; struct net_device *dev; + struct wireless_dev *wdev; struct cfg80211_crypto_settings crypto; struct ieee80211_channel *chan, *fixedchan; const u8 *bssid, *ssid, *ie = NULL, *prev_bssid = NULL; @@ -3616,7 +3617,8 @@ static int nl80211_associate(struct sk_buff *skb, struct genl_info *info) } mutex_lock(&rdev->devlist_mtx); - fixedchan = rdev_fixed_channel(rdev, NULL); + wdev = dev->ieee80211_ptr; + fixedchan = rdev_fixed_channel(rdev, wdev); if (fixedchan && chan != fixedchan) { err = -EBUSY; mutex_unlock(&rdev->devlist_mtx); -- cgit v1.1 From ef15aac6073b27fd4f70007784d2d52ed394bf43 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 20 Jan 2010 12:02:33 +0100 Subject: cfg80211: export multiple MAC addresses in sysfs If a device has multiple MAC addresses, userspace will need to know about that. Similarly, if it allows the MAC addresses to vary by a bitmask. If a driver exports multiple addresses, it is assumed that it will be able to deal with that many different addresses, which need not necessarily match the ones programmed into the device; if a mask is set then the device should deal addresses within that mask based on an arbitrary "base address". To test it all and show how it is used, add support to hwsim even though it can't actually deal with addresses different from the default. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/core.c | 12 ++++++++++++ net/wireless/sysfs.c | 20 ++++++++++++++++++++ 2 files changed, 32 insertions(+) (limited to 'net/wireless') diff --git a/net/wireless/core.c b/net/wireless/core.c index d07f57c..71b6b3a 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -413,6 +413,18 @@ int wiphy_register(struct wiphy *wiphy) int i; u16 ifmodes = wiphy->interface_modes; + if (WARN_ON(wiphy->addresses && !wiphy->n_addresses)) + return -EINVAL; + + if (WARN_ON(wiphy->addresses && + !is_zero_ether_addr(wiphy->perm_addr) && + memcmp(wiphy->perm_addr, wiphy->addresses[0].addr, + ETH_ALEN))) + return -EINVAL; + + if (wiphy->addresses) + memcpy(wiphy->perm_addr, wiphy->addresses[0].addr, ETH_ALEN); + /* sanity check ifmodes */ WARN_ON(!ifmodes); ifmodes &= ((1 << __NL80211_IFTYPE_AFTER_LAST) - 1) & ~1; diff --git a/net/wireless/sysfs.c b/net/wireless/sysfs.c index efe3c5c..9f2cef3 100644 --- a/net/wireless/sysfs.c +++ b/net/wireless/sysfs.c @@ -33,10 +33,30 @@ static ssize_t name ## _show(struct device *dev, \ SHOW_FMT(index, "%d", wiphy_idx); SHOW_FMT(macaddress, "%pM", wiphy.perm_addr); +SHOW_FMT(address_mask, "%pM", wiphy.addr_mask); + +static ssize_t addresses_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct wiphy *wiphy = &dev_to_rdev(dev)->wiphy; + char *start = buf; + int i; + + if (!wiphy->addresses) + return sprintf(buf, "%pM\n", wiphy->perm_addr); + + for (i = 0; i < wiphy->n_addresses; i++) + buf += sprintf(buf, "%pM\n", &wiphy->addresses[i].addr); + + return buf - start; +} static struct device_attribute ieee80211_dev_attrs[] = { __ATTR_RO(index), __ATTR_RO(macaddress), + __ATTR_RO(address_mask), + __ATTR_RO(addresses), {} }; -- cgit v1.1 From d0dd2de0d055f0ffb1e2ecdc21380de9d12a85e2 Mon Sep 17 00:00:00 2001 From: Andriy Tkachuk Date: Wed, 20 Jan 2010 13:55:06 +0200 Subject: mac80211: Account HT Control field in Data frame hdrlen according to 802.11n-2009 ieee80211_hdrlen() should account account new HT Control field in 802.11 data frame header introduced by IEEE 802.11n standard. According to 802.11n-2009 HT Control field is present in data frames when both of following are met: 1. It is QoS data frame. 2. Order bit is set in Frame Control field. The change might be totally compatible with legacy non-11n aware frames, because 802.11-2007 standard states that "all QoS STAs set this subfield to 0". Signed-off-by: Andriy V. Tkachuk Acked-by : Benoit Papillault Signed-off-by: John W. Linville --- net/wireless/util.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'net/wireless') diff --git a/net/wireless/util.c b/net/wireless/util.c index 23557c1..be2ab8c 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -227,8 +227,11 @@ unsigned int ieee80211_hdrlen(__le16 fc) if (ieee80211_is_data(fc)) { if (ieee80211_has_a4(fc)) hdrlen = 30; - if (ieee80211_is_data_qos(fc)) + if (ieee80211_is_data_qos(fc)) { hdrlen += IEEE80211_QOS_CTL_LEN; + if (ieee80211_has_order(fc)) + hdrlen += IEEE80211_HT_CTL_LEN; + } goto out; } -- cgit v1.1 From c21dbf9214bce129f92e1af05552553ff0e318ed Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 26 Jan 2010 14:15:46 +0100 Subject: cfg80211: export cfg80211_find_ie This new function (previously a static function called just "find_ie" can be used to find a specific IE in a buffer of IEs. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/wireless/scan.c | 38 ++++++++++++++++++++------------------ 1 file changed, 20 insertions(+), 18 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 06b0231..978cac3 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -143,9 +143,9 @@ void cfg80211_bss_expire(struct cfg80211_registered_device *dev) dev->bss_generation++; } -static u8 *find_ie(u8 num, u8 *ies, int len) +const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len) { - while (len > 2 && ies[0] != num) { + while (len > 2 && ies[0] != eid) { len -= ies[1] + 2; ies += ies[1] + 2; } @@ -155,11 +155,12 @@ static u8 *find_ie(u8 num, u8 *ies, int len) return NULL; return ies; } +EXPORT_SYMBOL(cfg80211_find_ie); static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2) { - const u8 *ie1 = find_ie(num, ies1, len1); - const u8 *ie2 = find_ie(num, ies2, len2); + const u8 *ie1 = cfg80211_find_ie(num, ies1, len1); + const u8 *ie2 = cfg80211_find_ie(num, ies2, len2); int r; if (!ie1 && !ie2) @@ -185,9 +186,9 @@ static bool is_bss(struct cfg80211_bss *a, if (!ssid) return true; - ssidie = find_ie(WLAN_EID_SSID, - a->information_elements, - a->len_information_elements); + ssidie = cfg80211_find_ie(WLAN_EID_SSID, + a->information_elements, + a->len_information_elements); if (!ssidie) return false; if (ssidie[1] != ssid_len) @@ -204,9 +205,9 @@ static bool is_mesh(struct cfg80211_bss *a, if (!is_zero_ether_addr(a->bssid)) return false; - ie = find_ie(WLAN_EID_MESH_ID, - a->information_elements, - a->len_information_elements); + ie = cfg80211_find_ie(WLAN_EID_MESH_ID, + a->information_elements, + a->len_information_elements); if (!ie) return false; if (ie[1] != meshidlen) @@ -214,9 +215,9 @@ static bool is_mesh(struct cfg80211_bss *a, if (memcmp(ie + 2, meshid, meshidlen)) return false; - ie = find_ie(WLAN_EID_MESH_CONFIG, - a->information_elements, - a->len_information_elements); + ie = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + a->information_elements, + a->len_information_elements); if (!ie) return false; if (ie[1] != sizeof(struct ieee80211_meshconf_ie)) @@ -395,11 +396,12 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, if (is_zero_ether_addr(res->pub.bssid)) { /* must be mesh, verify */ - meshid = find_ie(WLAN_EID_MESH_ID, res->pub.information_elements, - res->pub.len_information_elements); - meshcfg = find_ie(WLAN_EID_MESH_CONFIG, - res->pub.information_elements, - res->pub.len_information_elements); + meshid = cfg80211_find_ie(WLAN_EID_MESH_ID, + res->pub.information_elements, + res->pub.len_information_elements); + meshcfg = cfg80211_find_ie(WLAN_EID_MESH_CONFIG, + res->pub.information_elements, + res->pub.len_information_elements); if (!meshid || !meshcfg || meshcfg[1] != sizeof(struct ieee80211_meshconf_ie)) { /* bogus mesh */ -- cgit v1.1 From 54233261d5aa2926f080b67ac22f508c9f15e690 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 27 Jan 2010 09:44:48 -0500 Subject: cfg80211: fix wext-compat for setting rate to 'auto' Signed-off-by: John W. Linville --- net/wireless/wext-compat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/wireless') diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 966d2f0..b17eeae 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -1214,7 +1214,7 @@ int cfg80211_wext_siwrate(struct net_device *dev, memset(&mask, 0, sizeof(mask)); fixed = 0; - maxrate = 0; + maxrate = (u32)-1; if (rate->value < 0) { /* nothing */ -- cgit v1.1 From a2bff2694b02448e1d5873ac010582bc9898021c Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 29 Jan 2010 19:58:56 -0500 Subject: cfg80211: avoid flushing the global workqueue for core reg hints When cfg80211 starts it will send a core regulatory hint. This is sent to the global workqueue but we force processing of it by flushing the global workqueue. The flushing was done since cfg80211 needs last_request to always be populated. Avoid flushing the global workqueue by processing the work required immediately instead of putting it into a linked list and processing it after the flush. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 5f8071d..5dcda28 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1920,14 +1920,12 @@ static int regulatory_hint_core(const char *alpha2) request->alpha2[1] = alpha2[1]; request->initiator = NL80211_REGDOM_SET_BY_CORE; - queue_regulatory_request(request); - /* * This ensures last_request is populated once modules * come swinging in and calling regulatory hints and * wiphy_apply_custom_regulatory(). */ - flush_scheduled_work(); + reg_process_hint(request); return 0; } -- cgit v1.1 From 09d989d179d0c679043556dda77c51b41a2dae7e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 29 Jan 2010 19:58:57 -0500 Subject: cfg80211: add regulatory hint disconnect support This adds a new regulatory hint to be used when we know all devices have been disconnected and idle. This can happen when we suspend, for instance. When we disconnect we can no longer assume the same regulatory rules learned from a country IE or beacon hints are applicable so restore regulatory settings to an initial state. Since driver hints are cached on the wiphy that called the hint, those hints are not reproduced onto cfg80211 as the wiphy will respect its own wiphy->regd regardless. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- net/wireless/reg.c | 157 ++++++++++++++++++++++++++++++++++++++++++++++++++++- net/wireless/reg.h | 18 ++++++ net/wireless/sme.c | 40 ++++++++++++++ 3 files changed, 212 insertions(+), 3 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 5dcda28..ed89c59 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -134,6 +134,7 @@ static const struct ieee80211_regdomain *cfg80211_world_regdom = &world_regdom; static char *ieee80211_regdom = "00"; +static char user_alpha2[2]; module_param(ieee80211_regdom, charp, 0444); MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); @@ -252,6 +253,27 @@ static bool regdom_changes(const char *alpha2) return true; } +/* + * The NL80211_REGDOM_SET_BY_USER regdom alpha2 is cached, this lets + * you know if a valid regulatory hint with NL80211_REGDOM_SET_BY_USER + * has ever been issued. + */ +static bool is_user_regdom_saved(void) +{ + if (user_alpha2[0] == '9' && user_alpha2[1] == '7') + return false; + + /* This would indicate a mistake on the design */ + if (WARN((!is_world_regdom(user_alpha2) && + !is_an_alpha2(user_alpha2)), + "Unexpected user alpha2: %c%c\n", + user_alpha2[0], + user_alpha2[1])) + return false; + + return true; +} + /** * country_ie_integrity_changes - tells us if the country IE has changed * @checksum: checksum of country IE of fields we are interested in @@ -1646,7 +1668,7 @@ static int ignore_request(struct wiphy *wiphy, switch (pending_request->initiator) { case NL80211_REGDOM_SET_BY_CORE: - return -EINVAL; + return 0; case NL80211_REGDOM_SET_BY_COUNTRY_IE: last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); @@ -1785,6 +1807,11 @@ new_request: pending_request = NULL; + if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) { + user_alpha2[0] = last_request->alpha2[0]; + user_alpha2[1] = last_request->alpha2[1]; + } + /* When r == REG_INTERSECT we do need to call CRDA */ if (r < 0) { /* @@ -1904,12 +1931,16 @@ static void queue_regulatory_request(struct regulatory_request *request) schedule_work(®_work); } -/* Core regulatory hint -- happens once during cfg80211_init() */ +/* + * Core regulatory hint -- happens during cfg80211_init() + * and when we restore regulatory settings. + */ static int regulatory_hint_core(const char *alpha2) { struct regulatory_request *request; - BUG_ON(last_request); + kfree(last_request); + last_request = NULL; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -2107,6 +2138,123 @@ out: mutex_unlock(®_mutex); } +static void restore_alpha2(char *alpha2, bool reset_user) +{ + /* indicates there is no alpha2 to consider for restoration */ + alpha2[0] = '9'; + alpha2[1] = '7'; + + /* The user setting has precedence over the module parameter */ + if (is_user_regdom_saved()) { + /* Unless we're asked to ignore it and reset it */ + if (reset_user) { + REG_DBG_PRINT("cfg80211: Restoring regulatory settings " + "including user preference\n"); + user_alpha2[0] = '9'; + user_alpha2[1] = '7'; + + /* + * If we're ignoring user settings, we still need to + * check the module parameter to ensure we put things + * back as they were for a full restore. + */ + if (!is_world_regdom(ieee80211_regdom)) { + REG_DBG_PRINT("cfg80211: Keeping preference on " + "module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], + ieee80211_regdom[1]); + alpha2[0] = ieee80211_regdom[0]; + alpha2[1] = ieee80211_regdom[1]; + } + } else { + REG_DBG_PRINT("cfg80211: Restoring regulatory settings " + "while preserving user preference for: %c%c\n", + user_alpha2[0], + user_alpha2[1]); + alpha2[0] = user_alpha2[0]; + alpha2[1] = user_alpha2[1]; + } + } else if (!is_world_regdom(ieee80211_regdom)) { + REG_DBG_PRINT("cfg80211: Keeping preference on " + "module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], + ieee80211_regdom[1]); + alpha2[0] = ieee80211_regdom[0]; + alpha2[1] = ieee80211_regdom[1]; + } else + REG_DBG_PRINT("cfg80211: Restoring regulatory settings\n"); +} + +/* + * Restoring regulatory settings involves ingoring any + * possibly stale country IE information and user regulatory + * settings if so desired, this includes any beacon hints + * learned as we could have traveled outside to another country + * after disconnection. To restore regulatory settings we do + * exactly what we did at bootup: + * + * - send a core regulatory hint + * - send a user regulatory hint if applicable + * + * Device drivers that send a regulatory hint for a specific country + * keep their own regulatory domain on wiphy->regd so that does does + * not need to be remembered. + */ +static void restore_regulatory_settings(bool reset_user) +{ + char alpha2[2]; + struct reg_beacon *reg_beacon, *btmp; + + mutex_lock(&cfg80211_mutex); + mutex_lock(®_mutex); + + reset_regdomains(); + restore_alpha2(alpha2, reset_user); + + /* Clear beacon hints */ + spin_lock_bh(®_pending_beacons_lock); + if (!list_empty(®_pending_beacons)) { + list_for_each_entry_safe(reg_beacon, btmp, + ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); + } + } + spin_unlock_bh(®_pending_beacons_lock); + + if (!list_empty(®_beacon_list)) { + list_for_each_entry_safe(reg_beacon, btmp, + ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); + } + } + + /* First restore to the basic regulatory settings */ + cfg80211_regdomain = cfg80211_world_regdom; + + mutex_unlock(®_mutex); + mutex_unlock(&cfg80211_mutex); + + regulatory_hint_core(cfg80211_regdomain->alpha2); + + /* + * This restores the ieee80211_regdom module parameter + * preference or the last user requested regulatory + * settings, user regulatory settings takes precedence. + */ + if (is_an_alpha2(alpha2)) + regulatory_hint_user(user_alpha2); +} + + +void regulatory_hint_disconnect(void) +{ + REG_DBG_PRINT("cfg80211: All devices are disconnected, going to " + "restore regulatory settings\n"); + restore_regulatory_settings(false); +} + static bool freq_is_chan_12_13_14(u16 freq) { if (freq == ieee80211_channel_to_frequency(12) || @@ -2496,6 +2644,9 @@ int regulatory_init(void) cfg80211_regdomain = cfg80211_world_regdom; + user_alpha2[0] = '9'; + user_alpha2[1] = '7'; + /* We always try to get an update for the static regdomain */ err = regulatory_hint_core(cfg80211_regdomain->alpha2); if (err) { diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 3018508..b26224a 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -63,4 +63,22 @@ void regulatory_hint_11d(struct wiphy *wiphy, u8 *country_ie, u8 country_ie_len); +/** + * regulatory_hint_disconnect - informs all devices have been disconneted + * + * Regulotory rules can be enhanced further upon scanning and upon + * connection to an AP. These rules become stale if we disconnect + * and go to another country, whether or not we suspend and resume. + * If we suspend, go to another country and resume we'll automatically + * get disconnected shortly after resuming and things will be reset as well. + * This routine is a helper to restore regulatory settings to how they were + * prior to our first connect attempt. This includes ignoring country IE and + * beacon regulatory hints. The ieee80211_regdom module parameter will always + * be respected but if a user had set the regulatory domain that will take + * precedence. + * + * Must be called from process context. + */ +void regulatory_hint_disconnect(void); + #endif /* __NET_WIRELESS_REG_H */ diff --git a/net/wireless/sme.c b/net/wireless/sme.c index 745c37e..17fde0d 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -34,6 +34,44 @@ struct cfg80211_conn { bool auto_auth, prev_bssid_valid; }; +bool cfg80211_is_all_idle(void) +{ + struct cfg80211_registered_device *rdev; + struct wireless_dev *wdev; + bool is_all_idle = true; + + mutex_lock(&cfg80211_mutex); + + /* + * All devices must be idle as otherwise if you are actively + * scanning some new beacon hints could be learned and would + * count as new regulatory hints. + */ + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { + cfg80211_lock_rdev(rdev); + list_for_each_entry(wdev, &rdev->netdev_list, list) { + wdev_lock(wdev); + if (wdev->sme_state != CFG80211_SME_IDLE) + is_all_idle = false; + wdev_unlock(wdev); + } + cfg80211_unlock_rdev(rdev); + } + + mutex_unlock(&cfg80211_mutex); + + return is_all_idle; +} + +static void disconnect_work(struct work_struct *work) +{ + if (!cfg80211_is_all_idle()) + return; + + regulatory_hint_disconnect(); +} + +static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work); static int cfg80211_conn_scan(struct wireless_dev *wdev) { @@ -658,6 +696,8 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); wdev->wext.connect.ssid_len = 0; #endif + + schedule_work(&cfg80211_disconnect_work); } void cfg80211_disconnected(struct net_device *dev, u16 reason, -- cgit v1.1 From d0833a6a2dbc169aba3abcc0904e5aea348bb4d3 Mon Sep 17 00:00:00 2001 From: Andriy Tkachuk Date: Tue, 2 Feb 2010 15:58:53 +0200 Subject: lib80211: Cosmetics - make room for MIC/CRC near the actual calculation Signed-off-by: Andriy V. Tkachuk Signed-off-by: John W. Linville --- net/wireless/lib80211_crypt_ccmp.c | 2 +- net/wireless/lib80211_crypt_tkip.c | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/lib80211_crypt_ccmp.c b/net/wireless/lib80211_crypt_ccmp.c index 2301dc1..b7fa31d 100644 --- a/net/wireless/lib80211_crypt_ccmp.c +++ b/net/wireless/lib80211_crypt_ccmp.c @@ -237,7 +237,6 @@ static int lib80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) return -1; pos = skb->data + hdr_len + CCMP_HDR_LEN; - mic = skb_put(skb, CCMP_MIC_LEN); hdr = (struct ieee80211_hdr *)skb->data; ccmp_init_blocks(key->tfm, hdr, key->tx_pn, data_len, b0, b, s0); @@ -257,6 +256,7 @@ static int lib80211_ccmp_encrypt(struct sk_buff *skb, int hdr_len, void *priv) pos += len; } + mic = skb_put(skb, CCMP_MIC_LEN); for (i = 0; i < CCMP_MIC_LEN; i++) mic[i] = b[i] ^ s0[i]; diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c index c362873..c6a3cae 100644 --- a/net/wireless/lib80211_crypt_tkip.c +++ b/net/wireless/lib80211_crypt_tkip.c @@ -384,9 +384,8 @@ static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) if ((lib80211_tkip_hdr(skb, hdr_len, rc4key, 16, priv)) < 0) return -1; - icv = skb_put(skb, 4); - crc = ~crc32_le(~0, pos, len); + icv = skb_put(skb, 4); icv[0] = crc; icv[1] = crc >> 8; icv[2] = crc >> 16; -- cgit v1.1 From 299af9d3db0fd3a4994e5e66717ecd276bdd60da Mon Sep 17 00:00:00 2001 From: Andriy Tkachuk Date: Tue, 2 Feb 2010 16:33:53 +0200 Subject: lib80211: Introduce TKIP_HDR_LEN define for code clarity Introduce TKIP_HDR_LEN define for code clarity (in the same way as CCMP_HDR_LEN). Also odd len variable (not used) dropped from lib80211_tkip_hdr(). Signed-off-by: Andriy V. Tkachuk Signed-off-by: John W. Linville --- net/wireless/lib80211_crypt_tkip.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'net/wireless') diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c index c6a3cae..8cbdb32 100644 --- a/net/wireless/lib80211_crypt_tkip.c +++ b/net/wireless/lib80211_crypt_tkip.c @@ -36,6 +36,8 @@ MODULE_AUTHOR("Jouni Malinen"); MODULE_DESCRIPTION("lib80211 crypt: TKIP"); MODULE_LICENSE("GPL"); +#define TKIP_HDR_LEN 8 + struct lib80211_tkip_data { #define TKIP_KEY_LEN 32 u8 key[TKIP_KEY_LEN]; @@ -314,13 +316,12 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len, u8 * rc4key, int keylen, void *priv) { struct lib80211_tkip_data *tkey = priv; - int len; u8 *pos; struct ieee80211_hdr *hdr; hdr = (struct ieee80211_hdr *)skb->data; - if (skb_headroom(skb) < 8 || skb->len < hdr_len) + if (skb_headroom(skb) < TKIP_HDR_LEN || skb->len < hdr_len) return -1; if (rc4key == NULL || keylen < 16) @@ -333,9 +334,8 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len, } tkip_mixing_phase2(rc4key, tkey->key, tkey->tx_ttak, tkey->tx_iv16); - len = skb->len - hdr_len; - pos = skb_push(skb, 8); - memmove(pos, pos + 8, hdr_len); + pos = skb_push(skb, TKIP_HDR_LEN); + memmove(pos, pos + TKIP_HDR_LEN, hdr_len); pos += hdr_len; *pos++ = *rc4key; @@ -353,7 +353,7 @@ static int lib80211_tkip_hdr(struct sk_buff *skb, int hdr_len, tkey->tx_iv32++; } - return 8; + return TKIP_HDR_LEN; } static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv) @@ -433,7 +433,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv) return -1; } - if (skb->len < hdr_len + 8 + 4) + if (skb->len < hdr_len + TKIP_HDR_LEN + 4) return -1; pos = skb->data + hdr_len; @@ -461,7 +461,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv) } iv16 = (pos[0] << 8) | pos[2]; iv32 = pos[4] | (pos[5] << 8) | (pos[6] << 16) | (pos[7] << 24); - pos += 8; + pos += TKIP_HDR_LEN; if (tkip_replay_check(iv32, iv16, tkey->rx_iv32, tkey->rx_iv16)) { #ifdef CONFIG_LIB80211_DEBUG @@ -522,8 +522,8 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv) tkey->rx_iv16_new = iv16; /* Remove IV and ICV */ - memmove(skb->data + 8, skb->data, hdr_len); - skb_pull(skb, 8); + memmove(skb->data + TKIP_HDR_LEN, skb->data, hdr_len); + skb_pull(skb, TKIP_HDR_LEN); skb_trim(skb, skb->len - 4); return keyidx; -- cgit v1.1