From 84d3dc200fc8b878acf7c1840b238e6a0450e4d0 Mon Sep 17 00:00:00 2001 From: Chengu Wang Date: Thu, 30 Jul 2009 19:43:55 +0800 Subject: ALSA: hda: Correct EAPD for Dell Inspiron 1525 The commit 24918b61b55c21e09a3e07cd82e1b3a8154782dc statically changes the model from dell-bios to dell-3stack to solve the sound decreasing regression (http://lkml.org/lkml/2008/9/12/203), however it leads to another problem that the 2nd headphone jack doesn't work (https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3987). So I think the commit 249**2dc is just a workaround. I would like to give a true solution here. The datasheet for STAC9228 says, GPIO2 is the same pin as VOL DOWN, and the EAPD pin is GPIO0. This is why the sound decreases if we set EAPD as GPIO2. This patch changes EAPD to GPIO0 to solve the problem. Signed-off-by: Chengu Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'sound') diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5383d8c..456ef6a 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -2266,7 +2266,7 @@ static struct snd_pci_quirk stac927x_cfg_tbl[] = { SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x01f3, "Dell Inspiron 1420", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0227, "Dell Vostro 1400 ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022e, "Dell ", STAC_DELL_BIOS), - SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_3ST), + SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x022f, "Dell Inspiron 1525", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0242, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x0243, "Dell ", STAC_DELL_BIOS), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02ff, "Dell ", STAC_DELL_BIOS), @@ -5645,6 +5645,13 @@ static int patch_stac927x(struct hda_codec *codec) /* GPIO2 High = Enable EAPD */ spec->eapd_mask = spec->gpio_mask = spec->gpio_dir = 0x04; spec->gpio_data = 0x04; + switch (codec->subsystem_id) { + case 0x1028022f: + /* correct EAPD to be GPIO0 */ + spec->eapd_mask = spec->gpio_mask = 0x01; + spec->gpio_dir = spec->gpio_data = 0x01; + break; + }; spec->dmic_nids = stac927x_dmic_nids; spec->num_dmics = STAC927X_NUM_DMICS; -- cgit v1.1