From 8b9e74eb8af808807192d16b76565c27154ae7ed Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Sat, 21 Aug 2010 10:38:16 -0300 Subject: perf tools: Add --tui and --stdio to choose the UI Relying just on ~/.perfconfig or rebuilding the tool disabling support for the TUI is too cumbersome, so allow specifying which UI to use and make the command line switch override whatever is in ~/.perfconfig. Suggested-by: Christoph Hellwig Cc: Christoph Hellwig Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Stephane Eranian LKML-Reference: Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Documentation/perf-annotate.txt | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) (limited to 'tools/perf/Documentation/perf-annotate.txt') diff --git a/tools/perf/Documentation/perf-annotate.txt b/tools/perf/Documentation/perf-annotate.txt index 5164a65..b2c6330 100644 --- a/tools/perf/Documentation/perf-annotate.txt +++ b/tools/perf/Documentation/perf-annotate.txt @@ -8,7 +8,7 @@ perf-annotate - Read perf.data (created by perf record) and display annotated co SYNOPSIS -------- [verse] -'perf annotate' [-i | --input=file] symbol_name +'perf annotate' [-i | --input=file] [symbol_name] DESCRIPTION ----------- @@ -24,6 +24,13 @@ OPTIONS --input=:: Input file name. (default: perf.data) +--stdio:: Use the stdio interface. + +--tui:: Use the TUI interface Use of --tui requires a tty, if one is not + present, as when piping to other commands, the stdio interface is + used. This interfaces starts by centering on the line with more + samples, TAB/UNTAB cycles thru the lines with more samples. + SEE ALSO -------- -linkperf:perf-record[1] +linkperf:perf-record[1], linkperf:perf-report[1] -- cgit v1.1