/* * Copyright © 2006-2007 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt */ #include #include #include #include #include #include #include "drmP.h" #include "intel_drv.h" #include "i915_drm.h" #include "i915_drv.h" #include "i915_trace.h" #include "drm_dp_helper.h" #include "drm_crtc_helper.h" #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) bool intel_pipe_has_type (struct drm_crtc *crtc, int type); static void intel_update_watermarks(struct drm_device *dev); static void intel_increase_pllclock(struct drm_crtc *crtc); static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); typedef struct { /* given values */ int n; int m1, m2; int p1, p2; /* derived values */ int dot; int vco; int m; int p; } intel_clock_t; typedef struct { int min, max; } intel_range_t; typedef struct { int dot_limit; int p2_slow, p2_fast; } intel_p2_t; #define INTEL_P2_NUM 2 typedef struct intel_limit intel_limit_t; struct intel_limit { intel_range_t dot, vco, n, m, m1, m2, p, p1; intel_p2_t p2; bool (* find_pll)(const intel_limit_t *, struct drm_crtc *, int, int, intel_clock_t *); }; /* FDI */ #define IRONLAKE_FDI_FREQ 2700000 /* in kHz for mode->clock */ static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static bool intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock); static inline u32 /* units of 100MHz */ intel_fdi_link_freq(struct drm_device *dev) { if (IS_GEN5(dev)) { struct drm_i915_private *dev_priv = dev->dev_private; return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2; } else return 27; } static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 930000, .max = 1400000 }, .n = { .min = 3, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 2, .max = 33 }, .p2 = { .dot_limit = 165000, .p2_slow = 4, .p2_fast = 2 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 930000, .max = 1400000 }, .n = { .min = 3, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, .p = { .min = 4, .max = 128 }, .p1 = { .min = 1, .max = 6 }, .p2 = { .dot_limit = 165000, .p2_slow = 14, .p2_fast = 7 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_sdvo = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1400000, .max = 2800000 }, .n = { .min = 1, .max = 6 }, .m = { .min = 70, .max = 120 }, .m1 = { .min = 10, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1400000, .max = 2800000 }, .n = { .min = 1, .max = 6 }, .m = { .min = 70, .max = 120 }, .m1 = { .min = 10, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 7, .max = 98 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 7 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_sdvo = { .dot = { .min = 25000, .max = 270000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 4 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 10, .max = 30 }, .p1 = { .min = 1, .max = 3}, .p2 = { .dot_limit = 270000, .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { .dot = { .min = 22000, .max = 400000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 4 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 16, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8}, .p2 = { .dot_limit = 165000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .dot = { .min = 20000, .max = 115000 }, .vco = { .min = 1750000, .max = 3500000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 0, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .dot = { .min = 80000, .max = 224000 }, .vco = { .min = 1750000, .max = 3500000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 104, .max = 138 }, .m1 = { .min = 17, .max = 23 }, .m2 = { .min = 5, .max = 11 }, .p = { .min = 14, .max = 42 }, .p1 = { .min = 2, .max = 6 }, .p2 = { .dot_limit = 0, .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_display_port = { .dot = { .min = 161670, .max = 227000 }, .vco = { .min = 1750000, .max = 3500000}, .n = { .min = 1, .max = 2 }, .m = { .min = 97, .max = 108 }, .m1 = { .min = 0x10, .max = 0x12 }, .m2 = { .min = 0x05, .max = 0x06 }, .p = { .min = 10, .max = 20 }, .p1 = { .min = 1, .max = 2}, .p2 = { .dot_limit = 0, .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_find_pll_g4x_dp, }; static const intel_limit_t intel_limits_pineview_sdvo = { .dot = { .min = 20000, .max = 400000}, .vco = { .min = 1700000, .max = 3500000 }, /* Pineview's Ncounter is a ring counter */ .n = { .min = 3, .max = 6 }, .m = { .min = 2, .max = 256 }, /* Pineview only has one combined m divider, which we treat as m2. */ .m1 = { .min = 0, .max = 0 }, .m2 = { .min = 0, .max = 254 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { .dot = { .min = 20000, .max = 400000 }, .vco = { .min = 1700000, .max = 3500000 }, .n = { .min = 3, .max = 6 }, .m = { .min = 2, .max = 256 }, .m1 = { .min = 0, .max = 0 }, .m2 = { .min = 0, .max = 254 }, .p = { .min = 7, .max = 112 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_find_best_PLL, }; /* Ironlake / Sandybridge * * We calculate clock using (register_value + 2) for N/M1/M2, so here * the range value for them is (actual_value - 2). */ static const intel_limit_t intel_limits_ironlake_dac = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 5 }, .m = { .min = 79, .max = 127 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 5, .max = 80 }, .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 10, .p2_fast = 5 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_single_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 118 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 127 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 14, .max = 56 }, .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; /* LVDS 100mhz refclk limits. */ static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 2 }, .m = { .min = 79, .max = 126 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 28, .max = 112 }, .p1 = { .min = 2,.max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000 }, .n = { .min = 1, .max = 3 }, .m = { .min = 79, .max = 126 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 14, .max = 42 }, .p1 = { .min = 2,.max = 6 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_display_port = { .dot = { .min = 25000, .max = 350000 }, .vco = { .min = 1760000, .max = 3510000}, .n = { .min = 1, .max = 2 }, .m = { .min = 81, .max = 90 }, .m1 = { .min = 12, .max = 22 }, .m2 = { .min = 5, .max = 9 }, .p = { .min = 10, .max = 20 }, .p1 = { .min = 1, .max = 2}, .p2 = { .dot_limit = 0, .p2_slow = 10, .p2_fast = 10 }, .find_pll = intel_find_pll_ironlake_dp, }; static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, int refclk) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) { /* LVDS dual channel */ if (refclk == 100000) limit = &intel_limits_ironlake_dual_lvds_100m; else limit = &intel_limits_ironlake_dual_lvds; } else { if (refclk == 100000) limit = &intel_limits_ironlake_single_lvds_100m; else limit = &intel_limits_ironlake_single_lvds; } } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || HAS_eDP) limit = &intel_limits_ironlake_display_port; else limit = &intel_limits_ironlake_dac; return limit; } static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; const intel_limit_t *limit; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) /* LVDS with dual channel */ limit = &intel_limits_g4x_dual_channel_lvds; else /* LVDS with dual channel */ limit = &intel_limits_g4x_single_channel_lvds; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) || intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) { limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits_g4x_sdvo; } else if (intel_pipe_has_type (crtc, INTEL_OUTPUT_DISPLAYPORT)) { limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ limit = &intel_limits_i9xx_sdvo; return limit; } static const intel_limit_t *intel_limit(struct drm_crtc *crtc, int refclk) { struct drm_device *dev = crtc->dev; const intel_limit_t *limit; if (HAS_PCH_SPLIT(dev)) limit = intel_ironlake_limit(crtc, refclk); else if (IS_G4X(dev)) { limit = intel_g4x_limit(crtc); } else if (IS_PINEVIEW(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_pineview_lvds; else limit = &intel_limits_pineview_sdvo; } else if (!IS_GEN2(dev)) { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i9xx_lvds; else limit = &intel_limits_i9xx_sdvo; } else { if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) limit = &intel_limits_i8xx_lvds; else limit = &intel_limits_i8xx_dvo; } return limit; } /* m1 is reserved as 0 in Pineview, n is a ring counter */ static void pineview_clock(int refclk, intel_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / clock->n; clock->dot = clock->vco / clock->p; } static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock) { if (IS_PINEVIEW(dev)) { pineview_clock(refclk, clock); return; } clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; } /** * Returns whether any output on the specified pipe is of the specified type */ bool intel_pipe_has_type(struct drm_crtc *crtc, int type) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) if (encoder->base.crtc == crtc && encoder->type == type) return true; return false; } #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0) /** * Returns whether the given set of divisors are valid for a given refclk with * the given connectors. */ static bool intel_PLL_is_valid(struct drm_device *dev, const intel_limit_t *limit, const intel_clock_t *clock) { if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1) INTELPllInvalid ("p1 out of range\n"); if (clock->p < limit->p.min || limit->p.max < clock->p) INTELPllInvalid ("p out of range\n"); if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2) INTELPllInvalid ("m2 out of range\n"); if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1) INTELPllInvalid ("m1 out of range\n"); if (clock->m1 <= clock->m2 && !IS_PINEVIEW(dev)) INTELPllInvalid ("m1 <= m2\n"); if (clock->m < limit->m.min || limit->m.max < clock->m) INTELPllInvalid ("m out of range\n"); if (clock->n < limit->n.min || limit->n.max < clock->n) INTELPllInvalid ("n out of range\n"); if (clock->vco < limit->vco.min || limit->vco.max < clock->vco) INTELPllInvalid ("vco out of range\n"); /* XXX: We may need to be checking "Dot clock" depending on the multiplier, * connector, etc., rather than just a single range. */ if (clock->dot < limit->dot.min || limit->dot.max < clock->dot) INTELPllInvalid ("dot out of range\n"); return true; } static bool intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; int err = target; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && (I915_READ(LVDS)) != 0) { /* * For LVDS, if the panel is on, just rely on its current * settings for dual-channel. We haven't figured out how to * reliably set up different single/dual channel state, if we * even can. */ if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset (best_clock, 0, sizeof (*best_clock)); for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { /* m1 is always 0 in Pineview */ if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) break; for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { for (clock.p1 = limit->p1.min; clock.p1 <= limit->p1.max; clock.p1++) { int this_err; intel_clock(dev, refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err) { *best_clock = clock; err = this_err; } } } } } return (err != target); } static bool intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; intel_clock_t clock; int max_n; bool found; /* approximately equals target * 0.00585 */ int err_most = (target >> 8) + (target >> 9); found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { int lvds_reg; if (HAS_PCH_SPLIT(dev)) lvds_reg = PCH_LVDS; else lvds_reg = LVDS; if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) clock.p2 = limit->p2.p2_fast; else clock.p2 = limit->p2.p2_slow; } else { if (target < limit->p2.dot_limit) clock.p2 = limit->p2.p2_slow; else clock.p2 = limit->p2.p2_fast; } memset(best_clock, 0, sizeof(*best_clock)); max_n = limit->n.max; /* based on hardware requirement, prefer smaller n to precision */ for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) { /* based on hardware requirement, prefere larger m1,m2 */ for (clock.m1 = limit->m1.max; clock.m1 >= limit->m1.min; clock.m1--) { for (clock.m2 = limit->m2.max; clock.m2 >= limit->m2.min; clock.m2--) { for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) { int this_err; intel_clock(dev, refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; this_err = abs(clock.dot - target); if (this_err < err_most) { *best_clock = clock; err_most = this_err; max_n = clock.n; found = true; } } } } } return found; } static bool intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; intel_clock_t clock; if (target < 200000) { clock.n = 1; clock.p1 = 2; clock.p2 = 10; clock.m1 = 12; clock.m2 = 9; } else { clock.n = 2; clock.p1 = 1; clock.p2 = 10; clock.m1 = 14; clock.m2 = 8; } intel_clock(dev, refclk, &clock); memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } /* DisplayPort has only two frequencies, 162MHz and 270MHz */ static bool intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *best_clock) { intel_clock_t clock; if (target < 200000) { clock.p1 = 2; clock.p2 = 10; clock.n = 2; clock.m1 = 23; clock.m2 = 8; } else { clock.p1 = 1; clock.p2 = 10; clock.n = 1; clock.m1 = 14; clock.m2 = 2; } clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); clock.p = (clock.p1 * clock.p2); clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; clock.vco = 0; memcpy(best_clock, &clock, sizeof(intel_clock_t)); return true; } /** * intel_wait_for_vblank - wait for vblank on a given pipe * @dev: drm device * @pipe: pipe to wait for * * Wait for vblank to occur on a given pipe. Needed for various bits of * mode setting code. */ void intel_wait_for_vblank(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; int pipestat_reg = PIPESTAT(pipe); /* Clear existing vblank status. Note this will clear any other * sticky status fields as well. * * This races with i915_driver_irq_handler() with the result * that either function could miss a vblank event. Here it is not * fatal, as we will either wait upon the next vblank interrupt or * timeout. Generally speaking intel_wait_for_vblank() is only * called during modeset at which time the GPU should be idle and * should *not* be performing page flips and thus not waiting on * vblanks... * Currently, the result of us stealing a vblank from the irq * handler is that a single frame will be skipped during swapbuffers. */ I915_WRITE(pipestat_reg, I915_READ(pipestat_reg) | PIPE_VBLANK_INTERRUPT_STATUS); /* Wait for vblank interrupt bit to set */ if (wait_for(I915_READ(pipestat_reg) & PIPE_VBLANK_INTERRUPT_STATUS, 50)) DRM_DEBUG_KMS("vblank wait timed out\n"); } /* * intel_wait_for_pipe_off - wait for pipe to turn off * @dev: drm device * @pipe: pipe to wait for * * After disabling a pipe, we can't wait for vblank in the usual way, * spinning on the vblank interrupt status bit, since we won't actually * see an interrupt when the pipe is disabled. * * On Gen4 and above: * wait for the pipe register state bit to turn off * * Otherwise: * wait for the display line value to settle (it usually * ends up stopping at the start of the next frame). * */ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; if (INTEL_INFO(dev)->gen >= 4) { int reg = PIPECONF(pipe); /* Wait for the Pipe State to go off */ if (wait_for((I915_READ(reg) & I965_PIPECONF_ACTIVE) == 0, 100)) DRM_DEBUG_KMS("pipe_off wait timed out\n"); } else { u32 last_line; int reg = PIPEDSL(pipe); unsigned long timeout = jiffies + msecs_to_jiffies(100); /* Wait for the display line to settle */ do { last_line = I915_READ(reg) & DSL_LINEMASK; mdelay(5); } while (((I915_READ(reg) & DSL_LINEMASK) != last_line) && time_after(timeout, jiffies)); if (time_after(jiffies, timeout)) DRM_DEBUG_KMS("pipe_off wait timed out\n"); } } static const char *state_string(bool enabled) { return enabled ? "on" : "off"; } /* Only for pre-ILK configs */ static void assert_pll(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = DPLL(pipe); val = I915_READ(reg); cur_state = !!(val & DPLL_VCO_ENABLE); WARN(cur_state != state, "PLL state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_pll_enabled(d, p) assert_pll(d, p, true) #define assert_pll_disabled(d, p) assert_pll(d, p, false) /* For ILK+ */ static void assert_pch_pll(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = PCH_DPLL(pipe); val = I915_READ(reg); cur_state = !!(val & DPLL_VCO_ENABLE); WARN(cur_state != state, "PCH PLL state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true) #define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false) static void assert_fdi_tx(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = FDI_TX_CTL(pipe); val = I915_READ(reg); cur_state = !!(val & FDI_TX_ENABLE); WARN(cur_state != state, "FDI TX state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true) #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false) static void assert_fdi_rx(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = FDI_RX_CTL(pipe); val = I915_READ(reg); cur_state = !!(val & FDI_RX_ENABLE); WARN(cur_state != state, "FDI RX state assertion failure (expected %s, current %s)\n", state_string(state), state_string(cur_state)); } #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true) #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false) static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* ILK FDI PLL is always enabled */ if (dev_priv->info->gen == 5) return; reg = FDI_TX_CTL(pipe); val = I915_READ(reg); WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n"); } static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; reg = FDI_RX_CTL(pipe); val = I915_READ(reg); WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n"); } static void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe) { int pp_reg, lvds_reg; u32 val; enum pipe panel_pipe = PIPE_A; bool locked = locked; if (HAS_PCH_SPLIT(dev_priv->dev)) { pp_reg = PCH_PP_CONTROL; lvds_reg = PCH_LVDS; } else { pp_reg = PP_CONTROL; lvds_reg = LVDS; } val = I915_READ(pp_reg); if (!(val & PANEL_POWER_ON) || ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)) locked = false; if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT) panel_pipe = PIPE_B; WARN(panel_pipe == pipe && locked, "panel assertion failure, pipe %c regs locked\n", pipe_name(pipe)); } static void assert_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) { int reg; u32 val; bool cur_state; reg = PIPECONF(pipe); val = I915_READ(reg); cur_state = !!(val & PIPECONF_ENABLE); WARN(cur_state != state, "pipe %c assertion failure (expected %s, current %s)\n", pipe_name(pipe), state_string(state), state_string(cur_state)); } #define assert_pipe_enabled(d, p) assert_pipe(d, p, true) #define assert_pipe_disabled(d, p) assert_pipe(d, p, false) static void assert_plane_enabled(struct drm_i915_private *dev_priv, enum plane plane) { int reg; u32 val; reg = DSPCNTR(plane); val = I915_READ(reg); WARN(!(val & DISPLAY_PLANE_ENABLE), "plane %c assertion failure, should be active but is disabled\n", plane_name(plane)); } static void assert_planes_disabled(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg, i; u32 val; int cur_pipe; /* Planes are fixed to pipes on ILK+ */ if (HAS_PCH_SPLIT(dev_priv->dev)) return; /* Need to check both planes against the pipe */ for (i = 0; i < 2; i++) { reg = DSPCNTR(i); val = I915_READ(reg); cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >> DISPPLANE_SEL_PIPE_SHIFT; WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe, "plane %c assertion failure, should be off on pipe %c but is still active\n", plane_name(i), pipe_name(pipe)); } } static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) { u32 val; bool enabled; val = I915_READ(PCH_DREF_CONTROL); enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | DREF_SUPERSPREAD_SOURCE_MASK)); WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n"); } static void assert_transcoder_disabled(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; bool enabled; reg = TRANSCONF(pipe); val = I915_READ(reg); enabled = !!(val & TRANS_ENABLE); WARN(enabled, "transcoder assertion failed, should be off on pipe %c but is still active\n", pipe_name(pipe)); } static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); WARN(DP_PIPE_ENABLED(val, pipe), "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); } static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); WARN(HDMI_PIPE_ENABLED(val, pipe), "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); } static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B); assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C); assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D); reg = PCH_ADPA; val = I915_READ(reg); WARN(ADPA_PIPE_ENABLED(val, pipe), "PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); WARN(LVDS_PIPE_ENABLED(val, pipe), "PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB); assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC); assert_pch_hdmi_disabled(dev_priv, pipe, HDMID); } /** * intel_enable_pll - enable a PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to * make sure the PLL reg is writable first though, since the panel write * protect mechanism may be enabled. * * Note! This is for pre-ILK only. */ static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* No really, not for ILK+ */ BUG_ON(dev_priv->info->gen >= 5); /* PLL is protected by panel, make sure we can write it */ if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev)) assert_panel_unlocked(dev_priv, pipe); reg = DPLL(pipe); val = I915_READ(reg); val |= DPLL_VCO_ENABLE; /* We do this three times for luck */ I915_WRITE(reg, val); POSTING_READ(reg); udelay(150); /* wait for warmup */ I915_WRITE(reg, val); POSTING_READ(reg); udelay(150); /* wait for warmup */ I915_WRITE(reg, val); POSTING_READ(reg); udelay(150); /* wait for warmup */ } /** * intel_disable_pll - disable a PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to disable * * Disable the PLL for @pipe, making sure the pipe is off first. * * Note! This is for pre-ILK only. */ static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* Don't disable pipe A or pipe A PLLs if needed */ if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) return; /* Make sure the pipe isn't still relying on us */ assert_pipe_disabled(dev_priv, pipe); reg = DPLL(pipe); val = I915_READ(reg); val &= ~DPLL_VCO_ENABLE; I915_WRITE(reg, val); POSTING_READ(reg); } /** * intel_enable_pch_pll - enable PCH PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * * The PCH PLL needs to be enabled before the PCH transcoder, since it * drives the transcoder clock. */ static void intel_enable_pch_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* PCH only available on ILK+ */ BUG_ON(dev_priv->info->gen < 5); /* PCH refclock must be enabled first */ assert_pch_refclk_enabled(dev_priv); reg = PCH_DPLL(pipe); val = I915_READ(reg); val |= DPLL_VCO_ENABLE; I915_WRITE(reg, val); POSTING_READ(reg); udelay(200); } static void intel_disable_pch_pll(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* PCH only available on ILK+ */ BUG_ON(dev_priv->info->gen < 5); /* Make sure transcoder isn't still depending on us */ assert_transcoder_disabled(dev_priv, pipe); reg = PCH_DPLL(pipe); val = I915_READ(reg); val &= ~DPLL_VCO_ENABLE; I915_WRITE(reg, val); POSTING_READ(reg); udelay(200); } static void intel_enable_transcoder(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* PCH only available on ILK+ */ BUG_ON(dev_priv->info->gen < 5); /* Make sure PCH DPLL is enabled */ assert_pch_pll_enabled(dev_priv, pipe); /* FDI must be feeding us bits for PCH ports */ assert_fdi_tx_enabled(dev_priv, pipe); assert_fdi_rx_enabled(dev_priv, pipe); reg = TRANSCONF(pipe); val = I915_READ(reg); /* * make the BPC in transcoder be consistent with * that in pipeconf reg. */ val &= ~PIPE_BPC_MASK; val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; I915_WRITE(reg, val | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); } static void intel_disable_transcoder(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* FDI relies on the transcoder */ assert_fdi_tx_disabled(dev_priv, pipe); assert_fdi_rx_disabled(dev_priv, pipe); /* Ports must be off as well */ assert_pch_ports_disabled(dev_priv, pipe); reg = TRANSCONF(pipe); val = I915_READ(reg); val &= ~TRANS_ENABLE; I915_WRITE(reg, val); /* wait for PCH transcoder off, transcoder state */ if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) DRM_ERROR("failed to disable transcoder\n"); } /** * intel_enable_pipe - enable a pipe, asserting requirements * @dev_priv: i915 private structure * @pipe: pipe to enable * @pch_port: on ILK+, is this pipe driving a PCH port or not * * Enable @pipe, making sure that various hardware specific requirements * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc. * * @pipe should be %PIPE_A or %PIPE_B. * * Will wait until the pipe is actually running (i.e. first vblank) before * returning. */ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, bool pch_port) { int reg; u32 val; /* * A pipe without a PLL won't actually be able to drive bits from * a plane. On ILK+ the pipe PLLs are integrated, so we don't * need the check. */ if (!HAS_PCH_SPLIT(dev_priv->dev)) assert_pll_enabled(dev_priv, pipe); else { if (pch_port) { /* if driving the PCH, we need FDI enabled */ assert_fdi_rx_pll_enabled(dev_priv, pipe); assert_fdi_tx_pll_enabled(dev_priv, pipe); } /* FIXME: assert CPU port conditions for SNB+ */ } reg = PIPECONF(pipe); val = I915_READ(reg); if (val & PIPECONF_ENABLE) return; I915_WRITE(reg, val | PIPECONF_ENABLE); intel_wait_for_vblank(dev_priv->dev, pipe); } /** * intel_disable_pipe - disable a pipe, asserting requirements * @dev_priv: i915 private structure * @pipe: pipe to disable * * Disable @pipe, making sure that various hardware specific requirements * are met, if applicable, e.g. plane disabled, panel fitter off, etc. * * @pipe should be %PIPE_A or %PIPE_B. * * Will wait until the pipe has shut down before returning. */ static void intel_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe) { int reg; u32 val; /* * Make sure planes won't keep trying to pump pixels to us, * or we might hang the display. */ assert_planes_disabled(dev_priv, pipe); /* Don't disable pipe A or pipe A PLLs if needed */ if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) return; reg = PIPECONF(pipe); val = I915_READ(reg); if ((val & PIPECONF_ENABLE) == 0) return; I915_WRITE(reg, val & ~PIPECONF_ENABLE); intel_wait_for_pipe_off(dev_priv->dev, pipe); } /** * intel_enable_plane - enable a display plane on a given pipe * @dev_priv: i915 private structure * @plane: plane to enable * @pipe: pipe being fed * * Enable @plane on @pipe, making sure that @pipe is running first. */ static void intel_enable_plane(struct drm_i915_private *dev_priv, enum plane plane, enum pipe pipe) { int reg; u32 val; /* If the pipe isn't enabled, we can't pump pixels and may hang */ assert_pipe_enabled(dev_priv, pipe); reg = DSPCNTR(plane); val = I915_READ(reg); if (val & DISPLAY_PLANE_ENABLE) return; I915_WRITE(reg, val | DISPLAY_PLANE_ENABLE); intel_wait_for_vblank(dev_priv->dev, pipe); } /* * Plane regs are double buffered, going from enabled->disabled needs a * trigger in order to latch. The display address reg provides this. */ static void intel_flush_display_plane(struct drm_i915_private *dev_priv, enum plane plane) { u32 reg = DSPADDR(plane); I915_WRITE(reg, I915_READ(reg)); } /** * intel_disable_plane - disable a display plane * @dev_priv: i915 private structure * @plane: plane to disable * @pipe: pipe consuming the data * * Disable @plane; should be an independent operation. */ static void intel_disable_plane(struct drm_i915_private *dev_priv, enum plane plane, enum pipe pipe) { int reg; u32 val; reg = DSPCNTR(plane); val = I915_READ(reg); if ((val & DISPLAY_PLANE_ENABLE) == 0) return; I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); intel_flush_display_plane(dev_priv, plane); intel_wait_for_vblank(dev_priv->dev, pipe); } static void disable_pch_dp(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); if (DP_PIPE_ENABLED(val, pipe)) I915_WRITE(reg, val & ~DP_PORT_EN); } static void disable_pch_hdmi(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); if (HDMI_PIPE_ENABLED(val, pipe)) I915_WRITE(reg, val & ~PORT_ENABLE); } /* Disable any ports connected to this transcoder */ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, enum pipe pipe) { u32 reg, val; val = I915_READ(PCH_PP_CONTROL); I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS); disable_pch_dp(dev_priv, pipe, PCH_DP_B); disable_pch_dp(dev_priv, pipe, PCH_DP_C); disable_pch_dp(dev_priv, pipe, PCH_DP_D); reg = PCH_ADPA; val = I915_READ(reg); if (ADPA_PIPE_ENABLED(val, pipe)) I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); reg = PCH_LVDS; val = I915_READ(reg); if (LVDS_PIPE_ENABLED(val, pipe)) { I915_WRITE(reg, val & ~LVDS_PORT_EN); POSTING_READ(reg); udelay(100); } disable_pch_hdmi(dev_priv, pipe, HDMIB); disable_pch_hdmi(dev_priv, pipe, HDMIC); disable_pch_hdmi(dev_priv, pipe, HDMID); } static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane, i; u32 fbc_ctl, fbc_ctl2; if (fb->pitch == dev_priv->cfb_pitch && obj->fence_reg == dev_priv->cfb_fence && intel_crtc->plane == dev_priv->cfb_plane && I915_READ(FBC_CONTROL) & FBC_CTL_EN) return; i8xx_disable_fbc(dev); dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE; if (fb->pitch < dev_priv->cfb_pitch) dev_priv->cfb_pitch = fb->pitch; /* FBC_CTL wants 64B units */ dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB; /* Clear old tags */ for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++) I915_WRITE(FBC_TAG + (i * 4), 0); /* Set it up... */ fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane; if (obj->tiling_mode != I915_TILING_NONE) fbc_ctl2 |= FBC_CTL_CPU_FENCE; I915_WRITE(FBC_CONTROL2, fbc_ctl2); I915_WRITE(FBC_FENCE_OFF, crtc->y); /* enable it... */ fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC; if (IS_I945GM(dev)) fbc_ctl |= FBC_CTL_C3_IDLE; /* 945 needs special SR handling */ fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT; fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT; if (obj->tiling_mode != I915_TILING_NONE) fbc_ctl |= dev_priv->cfb_fence; I915_WRITE(FBC_CONTROL, fbc_ctl); DRM_DEBUG_KMS("enabled FBC, pitch %ld, yoff %d, plane %d, ", dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane); } void i8xx_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 fbc_ctl; /* Disable compression */ fbc_ctl = I915_READ(FBC_CONTROL); if ((fbc_ctl & FBC_CTL_EN) == 0) return; fbc_ctl &= ~FBC_CTL_EN; I915_WRITE(FBC_CONTROL, fbc_ctl); /* Wait for compressing bit to clear */ if (wait_for((I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING) == 0, 10)) { DRM_DEBUG_KMS("FBC idle timed out\n"); return; } DRM_DEBUG_KMS("disabled FBC\n"); } static bool i8xx_fbc_enabled(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(FBC_CONTROL) & FBC_CTL_EN; } static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB; unsigned long stall_watermark = 200; u32 dpfc_ctl; dpfc_ctl = I915_READ(DPFC_CONTROL); if (dpfc_ctl & DPFC_CTL_EN) { if (dev_priv->cfb_pitch == dev_priv->cfb_pitch / 64 - 1 && dev_priv->cfb_fence == obj->fence_reg && dev_priv->cfb_plane == intel_crtc->plane && dev_priv->cfb_y == crtc->y) return; I915_WRITE(DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN); intel_wait_for_vblank(dev, intel_crtc->pipe); } dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; dev_priv->cfb_y = crtc->y; dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X; if (obj->tiling_mode != I915_TILING_NONE) { dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence; I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY); } else { I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY); } I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT)); I915_WRITE(DPFC_FENCE_YOFF, crtc->y); /* enable it... */ I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN); DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); } void g4x_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dpfc_ctl; /* Disable compression */ dpfc_ctl = I915_READ(DPFC_CONTROL); if (dpfc_ctl & DPFC_CTL_EN) { dpfc_ctl &= ~DPFC_CTL_EN; I915_WRITE(DPFC_CONTROL, dpfc_ctl); DRM_DEBUG_KMS("disabled FBC\n"); } } static bool g4x_fbc_enabled(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN; } static void sandybridge_blit_fbc_update(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 blt_ecoskpd; /* Make sure blitter notifies FBC of writes */ gen6_gt_force_wake_get(dev_priv); blt_ecoskpd = I915_READ(GEN6_BLITTER_ECOSKPD); blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY << GEN6_BLITTER_LOCK_SHIFT; I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); blt_ecoskpd |= GEN6_BLITTER_FBC_NOTIFY; I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); blt_ecoskpd &= ~(GEN6_BLITTER_FBC_NOTIFY << GEN6_BLITTER_LOCK_SHIFT); I915_WRITE(GEN6_BLITTER_ECOSKPD, blt_ecoskpd); POSTING_READ(GEN6_BLITTER_ECOSKPD); gen6_gt_force_wake_put(dev_priv); } static void ironlake_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *fb = crtc->fb; struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int plane = intel_crtc->plane == 0 ? DPFC_CTL_PLANEA : DPFC_CTL_PLANEB; unsigned long stall_watermark = 200; u32 dpfc_ctl; dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); if (dpfc_ctl & DPFC_CTL_EN) { if (dev_priv->cfb_pitch == dev_priv->cfb_pitch / 64 - 1 && dev_priv->cfb_fence == obj->fence_reg && dev_priv->cfb_plane == intel_crtc->plane && dev_priv->cfb_offset == obj->gtt_offset && dev_priv->cfb_y == crtc->y) return; I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl & ~DPFC_CTL_EN); intel_wait_for_vblank(dev, intel_crtc->pipe); } dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1; dev_priv->cfb_fence = obj->fence_reg; dev_priv->cfb_plane = intel_crtc->plane; dev_priv->cfb_offset = obj->gtt_offset; dev_priv->cfb_y = crtc->y; dpfc_ctl &= DPFC_RESERVED; dpfc_ctl |= (plane | DPFC_CTL_LIMIT_1X); if (obj->tiling_mode != I915_TILING_NONE) { dpfc_ctl |= (DPFC_CTL_FENCE_EN | dev_priv->cfb_fence); I915_WRITE(ILK_DPFC_CHICKEN, DPFC_HT_MODIFY); } else { I915_WRITE(ILK_DPFC_CHICKEN, ~DPFC_HT_MODIFY); } I915_WRITE(ILK_DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN | (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) | (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT)); I915_WRITE(ILK_DPFC_FENCE_YOFF, crtc->y); I915_WRITE(ILK_FBC_RT_BASE, obj->gtt_offset | ILK_FBC_RT_VALID); /* enable it... */ I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl | DPFC_CTL_EN); if (IS_GEN6(dev)) { I915_WRITE(SNB_DPFC_CTL_SA, SNB_CPU_FENCE_ENABLE | dev_priv->cfb_fence); I915_WRITE(DPFC_CPU_FENCE_OFFSET, crtc->y); sandybridge_blit_fbc_update(dev); } DRM_DEBUG_KMS("enabled fbc on plane %d\n", intel_crtc->plane); } void ironlake_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dpfc_ctl; /* Disable compression */ dpfc_ctl = I915_READ(ILK_DPFC_CONTROL); if (dpfc_ctl & DPFC_CTL_EN) { dpfc_ctl &= ~DPFC_CTL_EN; I915_WRITE(ILK_DPFC_CONTROL, dpfc_ctl); DRM_DEBUG_KMS("disabled FBC\n"); } } static bool ironlake_fbc_enabled(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; return I915_READ(ILK_DPFC_CONTROL) & DPFC_CTL_EN; } bool intel_fbc_enabled(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (!dev_priv->display.fbc_enabled) return false; return dev_priv->display.fbc_enabled(dev); } void intel_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_i915_private *dev_priv = crtc->dev->dev_private; if (!dev_priv->display.enable_fbc) return; dev_priv->display.enable_fbc(crtc, interval); } void intel_disable_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (!dev_priv->display.disable_fbc) return; dev_priv->display.disable_fbc(dev); } /** * intel_update_fbc - enable/disable FBC as needed * @dev: the drm_device * * Set up the framebuffer compression hardware at mode set time. We * enable it if possible: * - plane A only (on pre-965) * - no pixel mulitply/line duplication * - no alpha buffer discard * - no dual wide * - framebuffer <= 2048 in width, 1536 in height * * We can't assume that any compression will take place (worst case), * so the compressed buffer has to be the same size as the uncompressed * one. It also must reside (along with the line length buffer) in * stolen memory. * * We need to enable/disable FBC on a global basis. */ static void intel_update_fbc(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc = NULL, *tmp_crtc; struct intel_crtc *intel_crtc; struct drm_framebuffer *fb; struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj; DRM_DEBUG_KMS("\n"); if (!i915_powersave) return; if (!I915_HAS_FBC(dev)) return; /* * If FBC is already on, we just have to verify that we can * keep it that way... * Need to disable if: * - more than one pipe is active * - changing FBC params (stride, fence, mode) * - new fb is too large to fit in compressed buffer * - going to an unsupported config (interlace, pixel multiply, etc.) */ list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) { if (tmp_crtc->enabled && tmp_crtc->fb) { if (crtc) { DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES; goto out_disable; } crtc = tmp_crtc; } } if (!crtc || crtc->fb == NULL) { DRM_DEBUG_KMS("no output, disabling\n"); dev_priv->no_fbc_reason = FBC_NO_OUTPUT; goto out_disable; } intel_crtc = to_intel_crtc(crtc); fb = crtc->fb; intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; if (!i915_enable_fbc) { DRM_DEBUG_KMS("fbc disabled per module param (default off)\n"); dev_priv->no_fbc_reason = FBC_MODULE_PARAM; goto out_disable; } if (intel_fb->obj->base.size > dev_priv->cfb_size) { DRM_DEBUG_KMS("framebuffer too large, disabling " "compression\n"); dev_priv->no_fbc_reason = FBC_STOLEN_TOO_SMALL; goto out_disable; } if ((crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) || (crtc->mode.flags & DRM_MODE_FLAG_DBLSCAN)) { DRM_DEBUG_KMS("mode incompatible with compression, " "disabling\n"); dev_priv->no_fbc_reason = FBC_UNSUPPORTED_MODE; goto out_disable; } if ((crtc->mode.hdisplay > 2048) || (crtc->mode.vdisplay > 1536)) { DRM_DEBUG_KMS("mode too large for compression, disabling\n"); dev_priv->no_fbc_reason = FBC_MODE_TOO_LARGE; goto out_disable; } if ((IS_I915GM(dev) || IS_I945GM(dev)) && intel_crtc->plane != 0) { DRM_DEBUG_KMS("plane not 0, disabling compression\n"); dev_priv->no_fbc_reason = FBC_BAD_PLANE; goto out_disable; } if (obj->tiling_mode != I915_TILING_X) { DRM_DEBUG_KMS("framebuffer not tiled, disabling compression\n"); dev_priv->no_fbc_reason = FBC_NOT_TILED; goto out_disable; } /* If the kernel debugger is active, always disable compression */ if (in_dbg_master()) goto out_disable; intel_enable_fbc(crtc, 500); return; out_disable: /* Multiple disables should be harmless */ if (intel_fbc_enabled(dev)) { DRM_DEBUG_KMS("unsupported config, disabling FBC\n"); intel_disable_fbc(dev); } } int intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_i915_gem_object *obj, struct intel_ring_buffer *pipelined) { struct drm_i915_private *dev_priv = dev->dev_private; u32 alignment; int ret; switch (obj->tiling_mode) { case I915_TILING_NONE: if (IS_BROADWATER(dev) || IS_CRESTLINE(dev)) alignment = 128 * 1024; else if (INTEL_INFO(dev)->gen >= 4) alignment = 4 * 1024; else alignment = 64 * 1024; break; case I915_TILING_X: /* pin() will align the object as required by fence */ alignment = 0; break; case I915_TILING_Y: /* FIXME: Is this true? */ DRM_ERROR("Y tiled not allowed for scan out buffers\n"); return -EINVAL; default: BUG(); } dev_priv->mm.interruptible = false; ret = i915_gem_object_pin(obj, alignment, true); if (ret) goto err_interruptible; ret = i915_gem_object_set_to_display_plane(obj, pipelined); if (ret) goto err_unpin; /* Install a fence for tiled scan-out. Pre-i965 always needs a * fence, whereas 965+ only requires a fence if using * framebuffer compression. For simplicity, we always install * a fence as the cost is not that onerous. */ if (obj->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence(obj, pipelined); if (ret) goto err_unpin; } dev_priv->mm.interruptible = true; return 0; err_unpin: i915_gem_object_unpin(obj); err_interruptible: dev_priv->mm.interruptible = true; return ret; } /* Assume fb object is pinned & idle & fenced and just update base pointers */ static int intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb, int x, int y, enum mode_set_atomic state) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_framebuffer *intel_fb; struct drm_i915_gem_object *obj; int plane = intel_crtc->plane; unsigned long Start, Offset; u32 dspcntr; u32 reg; switch (plane) { case 0: case 1: break; default: DRM_ERROR("Can't update plane %d in SAREA\n", plane); return -EINVAL; } intel_fb = to_intel_framebuffer(fb); obj = intel_fb->obj; reg = DSPCNTR(plane); dspcntr = I915_READ(reg); /* Mask out pixel format bits in case we change it */ dspcntr &= ~DISPPLANE_PIXFORMAT_MASK; switch (fb->bits_per_pixel) { case 8: dspcntr |= DISPPLANE_8BPP; break; case 16: if (fb->depth == 15) dspcntr |= DISPPLANE_15_16BPP; else dspcntr |= DISPPLANE_16BPP; break; case 24: case 32: dspcntr |= DISPPLANE_32BPP_NO_ALPHA; break; default: DRM_ERROR("Unknown color depth\n"); return -EINVAL; } if (INTEL_INFO(dev)->gen >= 4) { if (obj->tiling_mode != I915_TILING_NONE) dspcntr |= DISPPLANE_TILED; else dspcntr &= ~DISPPLANE_TILED; } if (HAS_PCH_SPLIT(dev)) /* must disable */ dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; I915_WRITE(reg, dspcntr); Start = obj->gtt_offset; Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8); DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n", Start, Offset, x, y, fb->pitch); I915_WRITE(DSPSTRIDE(plane), fb->pitch); if (INTEL_INFO(dev)->gen >= 4) { I915_WRITE(DSPSURF(plane), Start); I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); I915_WRITE(DSPADDR(plane), Offset); } else I915_WRITE(DSPADDR(plane), Start + Offset); POSTING_READ(reg); intel_update_fbc(dev); intel_increase_pllclock(crtc); return 0; } static int intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int ret; /* no fb bound */ if (!crtc->fb) { DRM_DEBUG_KMS("No FB bound\n"); return 0; } switch (intel_crtc->plane) { case 0: case 1: break; default: return -EINVAL; } mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, to_intel_framebuffer(crtc->fb)->obj, NULL); if (ret != 0) { mutex_unlock(&dev->struct_mutex); return ret; } if (old_fb) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; wait_event(dev_priv->pending_flip_queue, atomic_read(&dev_priv->mm.wedged) || atomic_read(&obj->pending_flip) == 0); /* Big Hammer, we also need to ensure that any pending * MI_WAIT_FOR_EVENT inside a user batch buffer on the * current scanout is retired before unpinning the old * framebuffer. * * This should only fail upon a hung GPU, in which case we * can safely continue. */ ret = i915_gem_object_flush_gpu(obj); (void) ret; } ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, LEAVE_ATOMIC_MODE_SET); if (ret) { i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); mutex_unlock(&dev->struct_mutex); return ret; } if (old_fb) { intel_wait_for_vblank(dev, intel_crtc->pipe); i915_gem_object_unpin(to_intel_framebuffer(old_fb)->obj); } mutex_unlock(&dev->struct_mutex); if (!dev->primary->master) return 0; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) return 0; if (intel_crtc->pipe) { master_priv->sarea_priv->pipeB_x = x; master_priv->sarea_priv->pipeB_y = y; } else { master_priv->sarea_priv->pipeA_x = x; master_priv->sarea_priv->pipeA_y = y; } return 0; } static void ironlake_set_pll_edp(struct drm_crtc *crtc, int clock) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 dpa_ctl; DRM_DEBUG_KMS("eDP PLL enable for clock %d\n", clock); dpa_ctl = I915_READ(DP_A); dpa_ctl &= ~DP_PLL_FREQ_MASK; if (clock < 200000) { u32 temp; dpa_ctl |= DP_PLL_FREQ_160MHZ; /* workaround for 160Mhz: 1) program 0x4600c bits 15:0 = 0x8124 2) program 0x46010 bit 0 = 1 3) program 0x46034 bit 24 = 1 4) program 0x64000 bit 14 = 1 */ temp = I915_READ(0x4600c); temp &= 0xffff0000; I915_WRITE(0x4600c, temp | 0x8124); temp = I915_READ(0x46010); I915_WRITE(0x46010, temp | 1); temp = I915_READ(0x46034); I915_WRITE(0x46034, temp | (1 << 24)); } else { dpa_ctl |= DP_PLL_FREQ_270MHZ; } I915_WRITE(DP_A, dpa_ctl); POSTING_READ(DP_A); udelay(500); } static void intel_fdi_normal_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* enable normal train */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); if (IS_IVYBRIDGE(dev)) { temp &= ~FDI_LINK_TRAIN_NONE_IVB; temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE; } I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_NORMAL_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_NONE; } I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE); /* wait one idle pattern time */ POSTING_READ(reg); udelay(1000); /* IVB wants error correction enabled */ if (IS_IVYBRIDGE(dev)) I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE | FDI_FE_ERRC_ENABLE); } /* The FDI link training functions for ILK/Ibexpeak. */ static void ironlake_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp, tries; /* FDI needs bits from pipe & plane first */ assert_pipe_enabled(dev_priv, pipe); assert_plane_enabled(dev_priv, plane); /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(reg, temp); I915_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp | FDI_TX_ENABLE); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp | FDI_RX_ENABLE); POSTING_READ(reg); udelay(150); /* Ironlake workaround, enable clock pointer after FDI enable*/ if (HAS_PCH_IBX(dev)) { I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR | FDI_RX_PHASE_SYNC_POINTER_EN); } reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if ((temp & FDI_RX_BIT_LOCK)) { DRM_DEBUG_KMS("FDI train 1 done.\n"); I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); break; } } if (tries == 5) DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(150); reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (tries == 5) DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done\n"); } static const int snb_b_fdi_train_param [] = { FDI_LINK_TRAIN_400MV_0DB_SNB_B, FDI_LINK_TRAIN_400MV_6DB_SNB_B, FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, FDI_LINK_TRAIN_800MV_0DB_SNB_B, }; /* The FDI link training functions for SNB/Cougarpoint. */ static void gen6_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp, i; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; I915_WRITE(reg, temp | FDI_TX_ENABLE); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } I915_WRITE(reg, temp | FDI_RX_ENABLE); POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK) { I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("FDI train 1 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; if (IS_GEN6(dev)) { temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; /* SNB-B */ temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; } I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_2; } I915_WRITE(reg, temp); POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done.\n"); } /* Manual link training for Ivy Bridge A0 parts */ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp, i; /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); temp = I915_READ(reg); temp &= ~FDI_RX_SYMBOL_LOCK; temp &= ~FDI_RX_BIT_LOCK; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(150); /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~(7 << 19); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; temp |= FDI_COMPOSITE_SYNC; I915_WRITE(reg, temp | FDI_TX_ENABLE); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_AUTO; temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; temp |= FDI_COMPOSITE_SYNC; I915_WRITE(reg, temp | FDI_RX_ENABLE); POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_BIT_LOCK || (I915_READ(reg) & FDI_RX_BIT_LOCK)) { I915_WRITE(reg, temp | FDI_RX_BIT_LOCK); DRM_DEBUG_KMS("FDI train 1 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 1 fail!\n"); /* Train 2 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE_IVB; temp |= FDI_LINK_TRAIN_PATTERN_2_IVB; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B; I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_2_CPT; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(150); for (i = 0; i < 4; i++ ) { reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; temp |= snb_b_fdi_train_param[i]; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(500); reg = FDI_RX_IIR(pipe); temp = I915_READ(reg); DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp); if (temp & FDI_RX_SYMBOL_LOCK) { I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK); DRM_DEBUG_KMS("FDI train 2 done.\n"); break; } } if (i == 4) DRM_ERROR("FDI train 2 fail!\n"); DRM_DEBUG_KMS("FDI train done.\n"); } static void ironlake_fdi_pll_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* Write the TU size bits so error detection works */ I915_WRITE(FDI_RX_TUSIZE1(pipe), I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK); /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~((0x7 << 19) | (0x7 << 16)); temp |= (intel_crtc->fdi_lanes - 1) << 19; temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); POSTING_READ(reg); udelay(200); /* Switch from Rawclk to PCDclk */ temp = I915_READ(reg); I915_WRITE(reg, temp | FDI_PCDCLK); POSTING_READ(reg); udelay(200); /* Enable CPU FDI TX PLL, always on for Ironlake */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); if ((temp & FDI_TX_PLL_ENABLE) == 0) { I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE); POSTING_READ(reg); udelay(100); } } static void ironlake_fdi_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* disable CPU FDI tx and PCH FDI rx */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_TX_ENABLE); POSTING_READ(reg); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); temp &= ~(0x7 << 16); temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; I915_WRITE(reg, temp & ~FDI_RX_ENABLE); POSTING_READ(reg); udelay(100); /* Ironlake workaround, disable clock pointer after downing FDI */ if (HAS_PCH_IBX(dev)) { I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); I915_WRITE(FDI_RX_CHICKEN(pipe), I915_READ(FDI_RX_CHICKEN(pipe) & ~FDI_RX_PHASE_SYNC_POINTER_EN)); } /* still set train pattern 1 */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); if (HAS_PCH_CPT(dev)) { temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; } else { temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; } /* BPC in FDI rx is consistent with that in PIPECONF */ temp &= ~(0x07 << 16); temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; I915_WRITE(reg, temp); POSTING_READ(reg); udelay(100); } /* * When we disable a pipe, we need to clear any pending scanline wait events * to avoid hanging the ring, which we assume we are waiting on. */ static void intel_clear_scanline_wait(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_ring_buffer *ring; u32 tmp; if (IS_GEN2(dev)) /* Can't break the hang on i8xx */ return; ring = LP_RING(dev_priv); tmp = I915_READ_CTL(ring); if (tmp & RING_WAIT) I915_WRITE_CTL(ring, tmp); } static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) { struct drm_i915_gem_object *obj; struct drm_i915_private *dev_priv; if (crtc->fb == NULL) return; obj = to_intel_framebuffer(crtc->fb)->obj; dev_priv = crtc->dev->dev_private; wait_event(dev_priv->pending_flip_queue, atomic_read(&obj->pending_flip) == 0); } static bool intel_crtc_driving_pch(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; /* * If there's a non-PCH eDP on this crtc, it must be DP_A, and that * must be driven by its own crtc; no sharing is possible. */ list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_EDP: if (!intel_encoder_is_pch_edp(&encoder->base)) return false; continue; } } return true; } /* * Enable PCH resources required for PCH ports: * - PCH PLLs * - FDI training & RX/TX * - update transcoder timings * - DP transcoding bits * - transcoder */ static void ironlake_pch_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 reg, temp; /* For PCH output, training FDI link */ dev_priv->display.fdi_link_train(crtc); intel_enable_pch_pll(dev_priv, pipe); if (HAS_PCH_CPT(dev)) { /* Be sure PCH DPLL SEL is set */ temp = I915_READ(PCH_DPLL_SEL); if (pipe == 0 && (temp & TRANSA_DPLL_ENABLE) == 0) temp |= (TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); else if (pipe == 1 && (temp & TRANSB_DPLL_ENABLE) == 0) temp |= (TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); I915_WRITE(PCH_DPLL_SEL, temp); } /* set transcoder timing, panel must allow it */ assert_panel_unlocked(dev_priv, pipe); I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); intel_fdi_normal_train(crtc); /* For PCH DP, enable TRANS_DP_CTL */ if (HAS_PCH_CPT(dev) && intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | TRANS_DP_SYNC_MASK | TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC) temp |= TRANS_DP_VSYNC_ACTIVE_HIGH; switch (intel_trans_dp_port_sel(crtc)) { case PCH_DP_B: temp |= TRANS_DP_PORT_SEL_B; break; case PCH_DP_C: temp |= TRANS_DP_PORT_SEL_C; break; case PCH_DP_D: temp |= TRANS_DP_PORT_SEL_D; break; default: DRM_DEBUG_KMS("Wrong PCH DP port return. Guess port B\n"); temp |= TRANS_DP_PORT_SEL_B; break; } I915_WRITE(reg, temp); } intel_enable_transcoder(dev_priv, pipe); } static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 temp; bool is_pch_port; if (intel_crtc->active) return; intel_crtc->active = true; intel_update_watermarks(dev); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { temp = I915_READ(PCH_LVDS); if ((temp & LVDS_PORT_EN) == 0) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } is_pch_port = intel_crtc_driving_pch(crtc); if (is_pch_port) ironlake_fdi_pll_enable(crtc); else ironlake_fdi_disable(crtc); /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) { /* Force use of hard-coded filter coefficients * as some pre-programmed values are broken, * e.g. x201. */ if (IS_IVYBRIDGE(dev)) I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 | PF_PIPE_SEL_IVB(pipe)); else I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos); I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size); } /* * On ILK+ LUT must be loaded before the pipe is running but with * clocks enabled */ intel_crtc_load_lut(crtc); intel_enable_pipe(dev_priv, pipe, is_pch_port); intel_enable_plane(dev_priv, plane, pipe); if (is_pch_port) ironlake_pch_enable(crtc); mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); mutex_unlock(&dev->struct_mutex); intel_crtc_update_cursor(crtc, true); } static void ironlake_crtc_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; if (!intel_crtc->active) return; intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); intel_crtc_update_cursor(crtc, false); intel_disable_plane(dev_priv, plane, pipe); if (dev_priv->cfb_plane == plane && dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); intel_disable_pipe(dev_priv, pipe); /* Disable PF */ I915_WRITE(PF_CTL(pipe), 0); I915_WRITE(PF_WIN_SZ(pipe), 0); ironlake_fdi_disable(crtc); /* This is a horrible layering violation; we should be doing this in * the connector/encoder ->prepare instead, but we don't always have * enough information there about the config to know whether it will * actually be necessary or just cause undesired flicker. */ intel_disable_pch_ports(dev_priv, pipe); intel_disable_transcoder(dev_priv, pipe); if (HAS_PCH_CPT(dev)) { /* disable TRANS_DP_CTL */ reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); temp |= TRANS_DP_PORT_SEL_NONE; I915_WRITE(reg, temp); /* disable DPLL_SEL */ temp = I915_READ(PCH_DPLL_SEL); switch (pipe) { case 0: temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); break; case 1: temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); break; case 2: /* FIXME: manage transcoder PLLs? */ temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL); break; default: BUG(); /* wtf */ } I915_WRITE(PCH_DPLL_SEL, temp); } /* disable PCH DPLL */ intel_disable_pch_pll(dev_priv, pipe); /* Switch from PCDclk to Rawclk */ reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_PCDCLK); /* Disable CPU FDI TX PLL */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE); POSTING_READ(reg); udelay(100); reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE); /* Wait for the clocks to turn off. */ POSTING_READ(reg); udelay(100); intel_crtc->active = false; intel_update_watermarks(dev); mutex_lock(&dev->struct_mutex); intel_update_fbc(dev); intel_clear_scanline_wait(dev); mutex_unlock(&dev->struct_mutex); } static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane); ironlake_crtc_enable(crtc); break; case DRM_MODE_DPMS_OFF: DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane); ironlake_crtc_disable(crtc); break; } } static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) { if (!enable && intel_crtc->overlay) { struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; mutex_lock(&dev->struct_mutex); dev_priv->mm.interruptible = false; (void) intel_overlay_switch_off(intel_crtc->overlay); dev_priv->mm.interruptible = true; mutex_unlock(&dev->struct_mutex); } /* Let userspace switch the overlay on again. In most cases userspace * has to recompute where to put it anyway. */ } static void i9xx_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; if (intel_crtc->active) return; intel_crtc->active = true; intel_update_watermarks(dev); intel_enable_pll(dev_priv, pipe); intel_enable_pipe(dev_priv, pipe, false); intel_enable_plane(dev_priv, plane, pipe); intel_crtc_load_lut(crtc); intel_update_fbc(dev); /* Give the overlay scaler a chance to enable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, true); intel_crtc_update_cursor(crtc, true); } static void i9xx_crtc_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 pctl; if (!intel_crtc->active) return; /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); intel_crtc_dpms_overlay(intel_crtc, false); intel_crtc_update_cursor(crtc, false); if (dev_priv->cfb_plane == plane && dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); intel_disable_plane(dev_priv, plane, pipe); intel_disable_pipe(dev_priv, pipe); /* Disable pannel fitter if it is on this pipe. */ pctl = I915_READ(PFIT_CONTROL); if ((pctl & PFIT_ENABLE) && ((pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT) == pipe) I915_WRITE(PFIT_CONTROL, 0); intel_disable_pll(dev_priv, pipe); intel_crtc->active = false; intel_update_fbc(dev); intel_update_watermarks(dev); intel_clear_scanline_wait(dev); } static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode) { /* XXX: When our outputs are all unaware of DPMS modes other than off * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC. */ switch (mode) { case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: i9xx_crtc_enable(crtc); break; case DRM_MODE_DPMS_OFF: i9xx_crtc_disable(crtc); break; } } /** * Sets the power management mode of the pipe and plane. */ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_master_private *master_priv; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool enabled; if (intel_crtc->dpms_mode == mode) return; intel_crtc->dpms_mode = mode; dev_priv->display.dpms(crtc, mode); if (!dev->primary->master) return; master_priv = dev->primary->master->driver_priv; if (!master_priv->sarea_priv) return; enabled = crtc->enabled && mode != DRM_MODE_DPMS_OFF; switch (pipe) { case 0: master_priv->sarea_priv->pipeA_w = enabled ? crtc->mode.hdisplay : 0; master_priv->sarea_priv->pipeA_h = enabled ? crtc->mode.vdisplay : 0; break; case 1: master_priv->sarea_priv->pipeB_w = enabled ? crtc->mode.hdisplay : 0; master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; break; default: DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe)); break; } } static void intel_crtc_disable(struct drm_crtc *crtc) { struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; struct drm_device *dev = crtc->dev; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF); if (crtc->fb) { mutex_lock(&dev->struct_mutex); i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); mutex_unlock(&dev->struct_mutex); } } /* Prepare for a mode set. * * Note we could be a lot smarter here. We need to figure out which outputs * will be enabled, which disabled (in short, how the config will changes) * and perform the minimum necessary steps to accomplish that, e.g. updating * watermarks, FBC configuration, making sure PLLs are programmed correctly, * panel fitting is in the proper state, etc. */ static void i9xx_crtc_prepare(struct drm_crtc *crtc) { i9xx_crtc_disable(crtc); } static void i9xx_crtc_commit(struct drm_crtc *crtc) { i9xx_crtc_enable(crtc); } static void ironlake_crtc_prepare(struct drm_crtc *crtc) { ironlake_crtc_disable(crtc); } static void ironlake_crtc_commit(struct drm_crtc *crtc) { ironlake_crtc_enable(crtc); } void intel_encoder_prepare (struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; /* lvds has its own version of prepare see intel_lvds_prepare */ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF); } void intel_encoder_commit (struct drm_encoder *encoder) { struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; /* lvds has its own version of commit see intel_lvds_commit */ encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } void intel_encoder_destroy(struct drm_encoder *encoder) { struct intel_encoder *intel_encoder = to_intel_encoder(encoder); drm_encoder_cleanup(encoder); kfree(intel_encoder); } static bool intel_crtc_mode_fixup(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { struct drm_device *dev = crtc->dev; if (HAS_PCH_SPLIT(dev)) { /* FDI link clock is fixed at 2.7G */ if (mode->clock * 3 > IRONLAKE_FDI_FREQ * 4) return false; } /* XXX some encoders set the crtcinfo, others don't. * Obviously we need some form of conflict resolution here... */ if (adjusted_mode->crtc_htotal == 0) drm_mode_set_crtcinfo(adjusted_mode, 0); return true; } static int i945_get_display_clock_speed(struct drm_device *dev) { return 400000; } static int i915_get_display_clock_speed(struct drm_device *dev) { return 333000; } static int i9xx_misc_get_display_clock_speed(struct drm_device *dev) { return 200000; } static int i915gm_get_display_clock_speed(struct drm_device *dev) { u16 gcfgc = 0; pci_read_config_word(dev->pdev, GCFGC, &gcfgc); if (gcfgc & GC_LOW_FREQUENCY_ENABLE) return 133000; else { switch (gcfgc & GC_DISPLAY_CLOCK_MASK) { case GC_DISPLAY_CLOCK_333_MHZ: return 333000; default: case GC_DISPLAY_CLOCK_190_200_MHZ: return 190000; } } } static int i865_get_display_clock_speed(struct drm_device *dev) { return 266000; } static int i855_get_display_clock_speed(struct drm_device *dev) { u16 hpllcc = 0; /* Assume that the hardware is in the high speed state. This * should be the default. */ switch (hpllcc & GC_CLOCK_CONTROL_MASK) { case GC_CLOCK_133_200: case GC_CLOCK_100_200: return 200000; case GC_CLOCK_166_250: return 250000; case GC_CLOCK_100_133: return 133000; } /* Shouldn't happen */ return 0; } static int i830_get_display_clock_speed(struct drm_device *dev) { return 133000; } struct fdi_m_n { u32 tu; u32 gmch_m; u32 gmch_n; u32 link_m; u32 link_n; }; static void fdi_reduce_ratio(u32 *num, u32 *den) { while (*num > 0xffffff || *den > 0xffffff) { *num >>= 1; *den >>= 1; } } static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { m_n->tu = 64; /* default size */ /* BUG_ON(pixel_clock > INT_MAX / 36); */ m_n->gmch_m = bits_per_pixel * pixel_clock; m_n->gmch_n = link_clock * nlanes * 8; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); m_n->link_m = pixel_clock; m_n->link_n = link_clock; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } struct intel_watermark_params { unsigned long fifo_size; unsigned long max_wm; unsigned long default_wm; unsigned long guard_size; unsigned long cacheline_size; }; /* Pineview has different values for various configs */ static const struct intel_watermark_params pineview_display_wm = { PINEVIEW_DISPLAY_FIFO, PINEVIEW_MAX_WM, PINEVIEW_DFT_WM, PINEVIEW_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; static const struct intel_watermark_params pineview_display_hplloff_wm = { PINEVIEW_DISPLAY_FIFO, PINEVIEW_MAX_WM, PINEVIEW_DFT_HPLLOFF_WM, PINEVIEW_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; static const struct intel_watermark_params pineview_cursor_wm = { PINEVIEW_CURSOR_FIFO, PINEVIEW_CURSOR_MAX_WM, PINEVIEW_CURSOR_DFT_WM, PINEVIEW_CURSOR_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE, }; static const struct intel_watermark_params pineview_cursor_hplloff_wm = { PINEVIEW_CURSOR_FIFO, PINEVIEW_CURSOR_MAX_WM, PINEVIEW_CURSOR_DFT_WM, PINEVIEW_CURSOR_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; static const struct intel_watermark_params g4x_wm_info = { G4X_FIFO_SIZE, G4X_MAX_WM, G4X_MAX_WM, 2, G4X_FIFO_LINE_SIZE, }; static const struct intel_watermark_params g4x_cursor_wm_info = { I965_CURSOR_FIFO, I965_CURSOR_MAX_WM, I965_CURSOR_DFT_WM, 2, G4X_FIFO_LINE_SIZE, }; static const struct intel_watermark_params i965_cursor_wm_info = { I965_CURSOR_FIFO, I965_CURSOR_MAX_WM, I965_CURSOR_DFT_WM, 2, I915_FIFO_LINE_SIZE, }; static const struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, 1, 2, I915_FIFO_LINE_SIZE }; static const struct intel_watermark_params i915_wm_info = { I915_FIFO_SIZE, I915_MAX_WM, 1, 2, I915_FIFO_LINE_SIZE }; static const struct intel_watermark_params i855_wm_info = { I855GM_FIFO_SIZE, I915_MAX_WM, 1, 2, I830_FIFO_LINE_SIZE }; static const struct intel_watermark_params i830_wm_info = { I830_FIFO_SIZE, I915_MAX_WM, 1, 2, I830_FIFO_LINE_SIZE }; static const struct intel_watermark_params ironlake_display_wm_info = { ILK_DISPLAY_FIFO, ILK_DISPLAY_MAXWM, ILK_DISPLAY_DFTWM, 2, ILK_FIFO_LINE_SIZE }; static const struct intel_watermark_params ironlake_cursor_wm_info = { ILK_CURSOR_FIFO, ILK_CURSOR_MAXWM, ILK_CURSOR_DFTWM, 2, ILK_FIFO_LINE_SIZE }; static const struct intel_watermark_params ironlake_display_srwm_info = { ILK_DISPLAY_SR_FIFO, ILK_DISPLAY_MAX_SRWM, ILK_DISPLAY_DFT_SRWM, 2, ILK_FIFO_LINE_SIZE }; static const struct intel_watermark_params ironlake_cursor_srwm_info = { ILK_CURSOR_SR_FIFO, ILK_CURSOR_MAX_SRWM, ILK_CURSOR_DFT_SRWM, 2, ILK_FIFO_LINE_SIZE }; static const struct intel_watermark_params sandybridge_display_wm_info = { SNB_DISPLAY_FIFO, SNB_DISPLAY_MAXWM, SNB_DISPLAY_DFTWM, 2, SNB_FIFO_LINE_SIZE }; static const struct intel_watermark_params sandybridge_cursor_wm_info = { SNB_CURSOR_FIFO, SNB_CURSOR_MAXWM, SNB_CURSOR_DFTWM, 2, SNB_FIFO_LINE_SIZE }; static const struct intel_watermark_params sandybridge_display_srwm_info = { SNB_DISPLAY_SR_FIFO, SNB_DISPLAY_MAX_SRWM, SNB_DISPLAY_DFT_SRWM, 2, SNB_FIFO_LINE_SIZE }; static const struct intel_watermark_params sandybridge_cursor_srwm_info = { SNB_CURSOR_SR_FIFO, SNB_CURSOR_MAX_SRWM, SNB_CURSOR_DFT_SRWM, 2, SNB_FIFO_LINE_SIZE }; /** * intel_calculate_wm - calculate watermark level * @clock_in_khz: pixel clock * @wm: chip FIFO params * @pixel_size: display pixel size * @latency_ns: memory latency for the platform * * Calculate the watermark level (the level at which the display plane will * start fetching from memory again). Each chip has a different display * FIFO size and allocation, so the caller needs to figure that out and pass * in the correct intel_watermark_params structure. * * As the pixel clock runs, the FIFO will be drained at a rate that depends * on the pixel size. When it reaches the watermark level, it'll start * fetching FIFO line sized based chunks from memory until the FIFO fills * past the watermark point. If the FIFO drains completely, a FIFO underrun * will occur, and a display engine hang could result. */ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, const struct intel_watermark_params *wm, int fifo_size, int pixel_size, unsigned long latency_ns) { long entries_required, wm_size; /* * Note: we need to make sure we don't overflow for various clock & * latency values. * clocks go from a few thousand to several hundred thousand. * latency is usually a few thousand */ entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) / 1000; entries_required = DIV_ROUND_UP(entries_required, wm->cacheline_size); DRM_DEBUG_KMS("FIFO entries required for mode: %ld\n", entries_required); wm_size = fifo_size - (entries_required + wm->guard_size); DRM_DEBUG_KMS("FIFO watermark level: %ld\n", wm_size); /* Don't promote wm_size to unsigned... */ if (wm_size > (long)wm->max_wm) wm_size = wm->max_wm; if (wm_size <= 0) wm_size = wm->default_wm; return wm_size; } struct cxsr_latency { int is_desktop; int is_ddr3; unsigned long fsb_freq; unsigned long mem_freq; unsigned long display_sr; unsigned long display_hpll_disable; unsigned long cursor_sr; unsigned long cursor_hpll_disable; }; static const struct cxsr_latency cxsr_latency_table[] = { {1, 0, 800, 400, 3382, 33382, 3983, 33983}, /* DDR2-400 SC */ {1, 0, 800, 667, 3354, 33354, 3807, 33807}, /* DDR2-667 SC */ {1, 0, 800, 800, 3347, 33347, 3763, 33763}, /* DDR2-800 SC */ {1, 1, 800, 667, 6420, 36420, 6873, 36873}, /* DDR3-667 SC */ {1, 1, 800, 800, 5902, 35902, 6318, 36318}, /* DDR3-800 SC */ {1, 0, 667, 400, 3400, 33400, 4021, 34021}, /* DDR2-400 SC */ {1, 0, 667, 667, 3372, 33372, 3845, 33845}, /* DDR2-667 SC */ {1, 0, 667, 800, 3386, 33386, 3822, 33822}, /* DDR2-800 SC */ {1, 1, 667, 667, 6438, 36438, 6911, 36911}, /* DDR3-667 SC */ {1, 1, 667, 800, 5941, 35941, 6377, 36377}, /* DDR3-800 SC */ {1, 0, 400, 400, 3472, 33472, 4173, 34173}, /* DDR2-400 SC */ {1, 0, 400, 667, 3443, 33443, 3996, 33996}, /* DDR2-667 SC */ {1, 0, 400, 800, 3430, 33430, 3946, 33946}, /* DDR2-800 SC */ {1, 1, 400, 667, 6509, 36509, 7062, 37062}, /* DDR3-667 SC */ {1, 1, 400, 800, 5985, 35985, 6501, 36501}, /* DDR3-800 SC */ {0, 0, 800, 400, 3438, 33438, 4065, 34065}, /* DDR2-400 SC */ {0, 0, 800, 667, 3410, 33410, 3889, 33889}, /* DDR2-667 SC */ {0, 0, 800, 800, 3403, 33403, 3845, 33845}, /* DDR2-800 SC */ {0, 1, 800, 667, 6476, 36476, 6955, 36955}, /* DDR3-667 SC */ {0, 1, 800, 800, 5958, 35958, 6400, 36400}, /* DDR3-800 SC */ {0, 0, 667, 400, 3456, 33456, 4103, 34106}, /* DDR2-400 SC */ {0, 0, 667, 667, 3428, 33428, 3927, 33927}, /* DDR2-667 SC */ {0, 0, 667, 800, 3443, 33443, 3905, 33905}, /* DDR2-800 SC */ {0, 1, 667, 667, 6494, 36494, 6993, 36993}, /* DDR3-667 SC */ {0, 1, 667, 800, 5998, 35998, 6460, 36460}, /* DDR3-800 SC */ {0, 0, 400, 400, 3528, 33528, 4255, 34255}, /* DDR2-400 SC */ {0, 0, 400, 667, 3500, 33500, 4079, 34079}, /* DDR2-667 SC */ {0, 0, 400, 800, 3487, 33487, 4029, 34029}, /* DDR2-800 SC */ {0, 1, 400, 667, 6566, 36566, 7145, 37145}, /* DDR3-667 SC */ {0, 1, 400, 800, 6042, 36042, 6584, 36584}, /* DDR3-800 SC */ }; static const struct cxsr_latency *intel_get_cxsr_latency(int is_desktop, int is_ddr3, int fsb, int mem) { const struct cxsr_latency *latency; int i; if (fsb == 0 || mem == 0) return NULL; for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) { latency = &cxsr_latency_table[i]; if (is_desktop == latency->is_desktop && is_ddr3 == latency->is_ddr3 && fsb == latency->fsb_freq && mem == latency->mem_freq) return latency; } DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); return NULL; } static void pineview_disable_cxsr(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* deactivate cxsr */ I915_WRITE(DSPFW3, I915_READ(DSPFW3) & ~PINEVIEW_SELF_REFRESH_EN); } /* * Latency for FIFO fetches is dependent on several factors: * - memory configuration (speed, channels) * - chipset * - current MCH state * It can be fairly high in some situations, so here we assume a fairly * pessimal value. It's a tradeoff between extra memory fetches (if we * set this value too high, the FIFO will fetch frequently to stay full) * and power consumption (set it too low to save power and we might see * FIFO underruns and display "flicker"). * * A value of 5us seems to be a good balance; safe for very low end * platforms but not overly aggressive on lower latency configs. */ static const int latency_ns = 5000; static int i9xx_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; size = dsparb & 0x7f; if (plane) size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) - size; DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static int i85x_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; size = dsparb & 0x1ff; if (plane) size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) - size; size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static int i845_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; size = dsparb & 0x7f; size >>= 2; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static int i830_get_fifo_size(struct drm_device *dev, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dsparb = I915_READ(DSPARB); int size; size = dsparb & 0x7f; size >>= 1; /* Convert to cachelines */ DRM_DEBUG_KMS("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A", size); return size; } static struct drm_crtc *single_enabled_crtc(struct drm_device *dev) { struct drm_crtc *crtc, *enabled = NULL; list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (crtc->enabled && crtc->fb) { if (enabled) return NULL; enabled = crtc; } } return enabled; } static void pineview_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; const struct cxsr_latency *latency; u32 reg; unsigned long wm; latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, dev_priv->fsb_freq, dev_priv->mem_freq); if (!latency) { DRM_DEBUG_KMS("Unknown FSB/MEM found, disable CxSR\n"); pineview_disable_cxsr(dev); return; } crtc = single_enabled_crtc(dev); if (crtc) { int clock = crtc->mode.clock; int pixel_size = crtc->fb->bits_per_pixel / 8; /* Display SR */ wm = intel_calculate_wm(clock, &pineview_display_wm, pineview_display_wm.fifo_size, pixel_size, latency->display_sr); reg = I915_READ(DSPFW1); reg &= ~DSPFW_SR_MASK; reg |= wm << DSPFW_SR_SHIFT; I915_WRITE(DSPFW1, reg); DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg); /* cursor SR */ wm = intel_calculate_wm(clock, &pineview_cursor_wm, pineview_display_wm.fifo_size, pixel_size, latency->cursor_sr); reg = I915_READ(DSPFW3); reg &= ~DSPFW_CURSOR_SR_MASK; reg |= (wm & 0x3f) << DSPFW_CURSOR_SR_SHIFT; I915_WRITE(DSPFW3, reg); /* Display HPLL off SR */ wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm, pineview_display_hplloff_wm.fifo_size, pixel_size, latency->display_hpll_disable); reg = I915_READ(DSPFW3); reg &= ~DSPFW_HPLL_SR_MASK; reg |= wm & DSPFW_HPLL_SR_MASK; I915_WRITE(DSPFW3, reg); /* cursor HPLL off SR */ wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm, pineview_display_hplloff_wm.fifo_size, pixel_size, latency->cursor_hpll_disable); reg = I915_READ(DSPFW3); reg &= ~DSPFW_HPLL_CURSOR_MASK; reg |= (wm & 0x3f) << DSPFW_HPLL_CURSOR_SHIFT; I915_WRITE(DSPFW3, reg); DRM_DEBUG_KMS("DSPFW3 register is %x\n", reg); /* activate cxsr */ I915_WRITE(DSPFW3, I915_READ(DSPFW3) | PINEVIEW_SELF_REFRESH_EN); DRM_DEBUG_KMS("Self-refresh is enabled\n"); } else { pineview_disable_cxsr(dev); DRM_DEBUG_KMS("Self-refresh is disabled\n"); } } static bool g4x_compute_wm0(struct drm_device *dev, int plane, const struct intel_watermark_params *display, int display_latency_ns, const struct intel_watermark_params *cursor, int cursor_latency_ns, int *plane_wm, int *cursor_wm) { struct drm_crtc *crtc; int htotal, hdisplay, clock, pixel_size; int line_time_us, line_count; int entries, tlb_miss; crtc = intel_get_crtc_for_plane(dev, plane); if (crtc->fb == NULL || !crtc->enabled) { *cursor_wm = cursor->guard_size; *plane_wm = display->guard_size; return false; } htotal = crtc->mode.htotal; hdisplay = crtc->mode.hdisplay; clock = crtc->mode.clock; pixel_size = crtc->fb->bits_per_pixel / 8; /* Use the small buffer method to calculate plane watermark */ entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000; tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8; if (tlb_miss > 0) entries += tlb_miss; entries = DIV_ROUND_UP(entries, display->cacheline_size); *plane_wm = entries + display->guard_size; if (*plane_wm > (int)display->max_wm) *plane_wm = display->max_wm; /* Use the large buffer method to calculate cursor watermark */ line_time_us = ((htotal * 1000) / clock); line_count = (cursor_latency_ns / line_time_us + 1000) / 1000; entries = line_count * 64 * pixel_size; tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8; if (tlb_miss > 0) entries += tlb_miss; entries = DIV_ROUND_UP(entries, cursor->cacheline_size); *cursor_wm = entries + cursor->guard_size; if (*cursor_wm > (int)cursor->max_wm) *cursor_wm = (int)cursor->max_wm; return true; } /* * Check the wm result. * * If any calculated watermark values is larger than the maximum value that * can be programmed into the associated watermark register, that watermark * must be disabled. */ static bool g4x_check_srwm(struct drm_device *dev, int display_wm, int cursor_wm, const struct intel_watermark_params *display, const struct intel_watermark_params *cursor) { DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n", display_wm, cursor_wm); if (display_wm > display->max_wm) { DRM_DEBUG_KMS("display watermark is too large(%d/%ld), disabling\n", display_wm, display->max_wm); return false; } if (cursor_wm > cursor->max_wm) { DRM_DEBUG_KMS("cursor watermark is too large(%d/%ld), disabling\n", cursor_wm, cursor->max_wm); return false; } if (!(display_wm || cursor_wm)) { DRM_DEBUG_KMS("SR latency is 0, disabling\n"); return false; } return true; } static bool g4x_compute_srwm(struct drm_device *dev, int plane, int latency_ns, const struct intel_watermark_params *display, const struct intel_watermark_params *cursor, int *display_wm, int *cursor_wm) { struct drm_crtc *crtc; int hdisplay, htotal, pixel_size, clock; unsigned long line_time_us; int line_count, line_size; int small, large; int entries; if (!latency_ns) { *display_wm = *cursor_wm = 0; return false; } crtc = intel_get_crtc_for_plane(dev, plane); hdisplay = crtc->mode.hdisplay; htotal = crtc->mode.htotal; clock = crtc->mode.clock; pixel_size = crtc->fb->bits_per_pixel / 8; line_time_us = (htotal * 1000) / clock; line_count = (latency_ns / line_time_us + 1000) / 1000; line_size = hdisplay * pixel_size; /* Use the minimum of the small and large buffer method for primary */ small = ((clock * pixel_size / 1000) * latency_ns) / 1000; large = line_count * line_size; entries = DIV_ROUND_UP(min(small, large), display->cacheline_size); *display_wm = entries + display->guard_size; /* calculate the self-refresh watermark for display cursor */ entries = line_count * pixel_size * 64; entries = DIV_ROUND_UP(entries, cursor->cacheline_size); *cursor_wm = entries + cursor->guard_size; return g4x_check_srwm(dev, *display_wm, *cursor_wm, display, cursor); } #define single_plane_enabled(mask) is_power_of_2(mask) static void g4x_update_wm(struct drm_device *dev) { static const int sr_latency_ns = 12000; struct drm_i915_private *dev_priv = dev->dev_private; int planea_wm, planeb_wm, cursora_wm, cursorb_wm; int plane_sr, cursor_sr; unsigned int enabled = 0; if (g4x_compute_wm0(dev, 0, &g4x_wm_info, latency_ns, &g4x_cursor_wm_info, latency_ns, &planea_wm, &cursora_wm)) enabled |= 1; if (g4x_compute_wm0(dev, 1, &g4x_wm_info, latency_ns, &g4x_cursor_wm_info, latency_ns, &planeb_wm, &cursorb_wm)) enabled |= 2; plane_sr = cursor_sr = 0; if (single_plane_enabled(enabled) && g4x_compute_srwm(dev, ffs(enabled) - 1, sr_latency_ns, &g4x_wm_info, &g4x_cursor_wm_info, &plane_sr, &cursor_sr)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); else I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", planea_wm, cursora_wm, planeb_wm, cursorb_wm, plane_sr, cursor_sr); I915_WRITE(DSPFW1, (plane_sr << DSPFW_SR_SHIFT) | (cursorb_wm << DSPFW_CURSORB_SHIFT) | (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | (cursora_wm << DSPFW_CURSORA_SHIFT)); /* HPLL off in SR has some issues on G4x... disable it */ I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i965_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; int srwm = 1; int cursor_sr = 16; /* Calc sr entries for one plane configs */ crtc = single_enabled_crtc(dev); if (crtc) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 12000; int clock = crtc->mode.clock; int htotal = crtc->mode.htotal; int hdisplay = crtc->mode.hdisplay; int pixel_size = crtc->fb->bits_per_pixel / 8; unsigned long line_time_us; int entries; line_time_us = ((htotal * 1000) / clock); /* Use ns/us then divide to preserve precision */ entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * pixel_size * hdisplay; entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE); srwm = I965_FIFO_SIZE - entries; if (srwm < 0) srwm = 1; srwm &= 0x1ff; DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n", entries, srwm); entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * pixel_size * 64; entries = DIV_ROUND_UP(entries, i965_cursor_wm_info.cacheline_size); cursor_sr = i965_cursor_wm_info.fifo_size - (entries + i965_cursor_wm_info.guard_size); if (cursor_sr > i965_cursor_wm_info.max_wm) cursor_sr = i965_cursor_wm_info.max_wm; DRM_DEBUG_KMS("self-refresh watermark: display plane %d " "cursor %d\n", srwm, cursor_sr); if (IS_CRESTLINE(dev)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); } else { /* Turn off self refresh if both pipes are enabled */ if (IS_CRESTLINE(dev)) I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: 8, B: 8, C: 8, SR %d\n", srwm); /* 965 has limitations... */ I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | (8 << 16) | (8 << 8) | (8 << 0)); I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); /* update cursor SR watermark */ I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } static void i9xx_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; const struct intel_watermark_params *wm_info; uint32_t fwater_lo; uint32_t fwater_hi; int cwm, srwm = 1; int fifo_size; int planea_wm, planeb_wm; struct drm_crtc *crtc, *enabled = NULL; if (IS_I945GM(dev)) wm_info = &i945_wm_info; else if (!IS_GEN2(dev)) wm_info = &i915_wm_info; else wm_info = &i855_wm_info; fifo_size = dev_priv->display.get_fifo_size(dev, 0); crtc = intel_get_crtc_for_plane(dev, 0); if (crtc->enabled && crtc->fb) { planea_wm = intel_calculate_wm(crtc->mode.clock, wm_info, fifo_size, crtc->fb->bits_per_pixel / 8, latency_ns); enabled = crtc; } else planea_wm = fifo_size - wm_info->guard_size; fifo_size = dev_priv->display.get_fifo_size(dev, 1); crtc = intel_get_crtc_for_plane(dev, 1); if (crtc->enabled && crtc->fb) { planeb_wm = intel_calculate_wm(crtc->mode.clock, wm_info, fifo_size, crtc->fb->bits_per_pixel / 8, latency_ns); if (enabled == NULL) enabled = crtc; else enabled = NULL; } else planeb_wm = fifo_size - wm_info->guard_size; DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); /* * Overlay gets an aggressive default since video jitter is bad. */ cwm = 2; /* Play safe and disable self-refresh before adjusting watermarks. */ if (IS_I945G(dev) || IS_I945GM(dev)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0); else if (IS_I915GM(dev)) I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN); /* Calc sr entries for one plane configs */ if (HAS_FW_BLC(dev) && enabled) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 6000; int clock = enabled->mode.clock; int htotal = enabled->mode.htotal; int hdisplay = enabled->mode.hdisplay; int pixel_size = enabled->fb->bits_per_pixel / 8; unsigned long line_time_us; int entries; line_time_us = (htotal * 1000) / clock; /* Use ns/us then divide to preserve precision */ entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * pixel_size * hdisplay; entries = DIV_ROUND_UP(entries, wm_info->cacheline_size); DRM_DEBUG_KMS("self-refresh entries: %d\n", entries); srwm = wm_info->fifo_size - entries; if (srwm < 0) srwm = 1; if (IS_I945G(dev) || IS_I945GM(dev)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_FIFO_MASK | (srwm & 0xff)); else if (IS_I915GM(dev)) I915_WRITE(FW_BLC_SELF, srwm & 0x3f); } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", planea_wm, planeb_wm, cwm, srwm); fwater_lo = ((planeb_wm & 0x3f) << 16) | (planea_wm & 0x3f); fwater_hi = (cwm & 0x1f); /* Set request length to 8 cachelines per fetch */ fwater_lo = fwater_lo | (1 << 24) | (1 << 8); fwater_hi = fwater_hi | (1 << 8); I915_WRITE(FW_BLC, fwater_lo); I915_WRITE(FW_BLC2, fwater_hi); if (HAS_FW_BLC(dev)) { if (enabled) { if (IS_I945G(dev) || IS_I945GM(dev)) I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN); else if (IS_I915GM(dev)) I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN); DRM_DEBUG_KMS("memory self refresh enabled\n"); } else DRM_DEBUG_KMS("memory self refresh disabled\n"); } } static void i830_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; uint32_t fwater_lo; int planea_wm; crtc = single_enabled_crtc(dev); if (crtc == NULL) return; planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info, dev_priv->display.get_fifo_size(dev, 0), crtc->fb->bits_per_pixel / 8, latency_ns); fwater_lo = I915_READ(FW_BLC) & ~0xfff; fwater_lo |= (3<<8) | planea_wm; DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm); I915_WRITE(FW_BLC, fwater_lo); } #define ILK_LP0_PLANE_LATENCY 700 #define ILK_LP0_CURSOR_LATENCY 1300 /* * Check the wm result. * * If any calculated watermark values is larger than the maximum value that * can be programmed into the associated watermark register, that watermark * must be disabled. */ static bool ironlake_check_srwm(struct drm_device *dev, int level, int fbc_wm, int display_wm, int cursor_wm, const struct intel_watermark_params *display, const struct intel_watermark_params *cursor) { struct drm_i915_private *dev_priv = dev->dev_private; DRM_DEBUG_KMS("watermark %d: display plane %d, fbc lines %d," " cursor %d\n", level, display_wm, fbc_wm, cursor_wm); if (fbc_wm > SNB_FBC_MAX_SRWM) { DRM_DEBUG_KMS("fbc watermark(%d) is too large(%d), disabling wm%d+\n", fbc_wm, SNB_FBC_MAX_SRWM, level); /* fbc has it's own way to disable FBC WM */ I915_WRITE(DISP_ARB_CTL, I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS); return false; } if (display_wm > display->max_wm) { DRM_DEBUG_KMS("display watermark(%d) is too large(%d), disabling wm%d+\n", display_wm, SNB_DISPLAY_MAX_SRWM, level); return false; } if (cursor_wm > cursor->max_wm) { DRM_DEBUG_KMS("cursor watermark(%d) is too large(%d), disabling wm%d+\n", cursor_wm, SNB_CURSOR_MAX_SRWM, level); return false; } if (!(fbc_wm || display_wm || cursor_wm)) { DRM_DEBUG_KMS("latency %d is 0, disabling wm%d+\n", level, level); return false; } return true; } /* * Compute watermark values of WM[1-3], */ static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane, int latency_ns, const struct intel_watermark_params *display, const struct intel_watermark_params *cursor, int *fbc_wm, int *display_wm, int *cursor_wm) { struct drm_crtc *crtc; unsigned long line_time_us; int hdisplay, htotal, pixel_size, clock; int line_count, line_size; int small, large; int entries; if (!latency_ns) { *fbc_wm = *display_wm = *cursor_wm = 0; return false; } crtc = intel_get_crtc_for_plane(dev, plane); hdisplay = crtc->mode.hdisplay; htotal = crtc->mode.htotal; clock = crtc->mode.clock; pixel_size = crtc->fb->bits_per_pixel / 8; line_time_us = (htotal * 1000) / clock; line_count = (latency_ns / line_time_us + 1000) / 1000; line_size = hdisplay * pixel_size; /* Use the minimum of the small and large buffer method for primary */ small = ((clock * pixel_size / 1000) * latency_ns) / 1000; large = line_count * line_size; entries = DIV_ROUND_UP(min(small, large), display->cacheline_size); *display_wm = entries + display->guard_size; /* * Spec says: * FBC WM = ((Final Primary WM * 64) / number of bytes per line) + 2 */ *fbc_wm = DIV_ROUND_UP(*display_wm * 64, line_size) + 2; /* calculate the self-refresh watermark for display cursor */ entries = line_count * pixel_size * 64; entries = DIV_ROUND_UP(entries, cursor->cacheline_size); *cursor_wm = entries + cursor->guard_size; return ironlake_check_srwm(dev, level, *fbc_wm, *display_wm, *cursor_wm, display, cursor); } static void ironlake_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int fbc_wm, plane_wm, cursor_wm; unsigned int enabled; enabled = 0; if (g4x_compute_wm0(dev, 0, &ironlake_display_wm_info, ILK_LP0_PLANE_LATENCY, &ironlake_cursor_wm_info, ILK_LP0_CURSOR_LATENCY, &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEA_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); enabled |= 1; } if (g4x_compute_wm0(dev, 1, &ironlake_display_wm_info, ILK_LP0_PLANE_LATENCY, &ironlake_cursor_wm_info, ILK_LP0_CURSOR_LATENCY, &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEB_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); enabled |= 2; } /* * Calculate and update the self-refresh watermark only when one * display plane is used. */ I915_WRITE(WM3_LP_ILK, 0); I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); if (!single_plane_enabled(enabled)) return; enabled = ffs(enabled) - 1; /* WM1 */ if (!ironlake_compute_srwm(dev, 1, enabled, ILK_READ_WM1_LATENCY() * 500, &ironlake_display_srwm_info, &ironlake_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) return; I915_WRITE(WM1_LP_ILK, WM1_LP_SR_EN | (ILK_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) | (fbc_wm << WM1_LP_FBC_SHIFT) | (plane_wm << WM1_LP_SR_SHIFT) | cursor_wm); /* WM2 */ if (!ironlake_compute_srwm(dev, 2, enabled, ILK_READ_WM2_LATENCY() * 500, &ironlake_display_srwm_info, &ironlake_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) return; I915_WRITE(WM2_LP_ILK, WM2_LP_EN | (ILK_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) | (fbc_wm << WM1_LP_FBC_SHIFT) | (plane_wm << WM1_LP_SR_SHIFT) | cursor_wm); /* * WM3 is unsupported on ILK, probably because we don't have latency * data for that power state */ } static void sandybridge_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */ int fbc_wm, plane_wm, cursor_wm; unsigned int enabled; enabled = 0; if (g4x_compute_wm0(dev, 0, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEA_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); enabled |= 1; } if (g4x_compute_wm0(dev, 1, &sandybridge_display_wm_info, latency, &sandybridge_cursor_wm_info, latency, &plane_wm, &cursor_wm)) { I915_WRITE(WM0_PIPEB_ILK, (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm); DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); enabled |= 2; } /* * Calculate and update the self-refresh watermark only when one * display plane is used. * * SNB support 3 levels of watermark. * * WM1/WM2/WM2 watermarks have to be enabled in the ascending order, * and disabled in the descending order * */ I915_WRITE(WM3_LP_ILK, 0); I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); if (!single_plane_enabled(enabled)) return; enabled = ffs(enabled) - 1; /* WM1 */ if (!ironlake_compute_srwm(dev, 1, enabled, SNB_READ_WM1_LATENCY() * 500, &sandybridge_display_srwm_info, &sandybridge_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) return; I915_WRITE(WM1_LP_ILK, WM1_LP_SR_EN | (SNB_READ_WM1_LATENCY() << WM1_LP_LATENCY_SHIFT) | (fbc_wm << WM1_LP_FBC_SHIFT) | (plane_wm << WM1_LP_SR_SHIFT) | cursor_wm); /* WM2 */ if (!ironlake_compute_srwm(dev, 2, enabled, SNB_READ_WM2_LATENCY() * 500, &sandybridge_display_srwm_info, &sandybridge_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) return; I915_WRITE(WM2_LP_ILK, WM2_LP_EN | (SNB_READ_WM2_LATENCY() << WM1_LP_LATENCY_SHIFT) | (fbc_wm << WM1_LP_FBC_SHIFT) | (plane_wm << WM1_LP_SR_SHIFT) | cursor_wm); /* WM3 */ if (!ironlake_compute_srwm(dev, 3, enabled, SNB_READ_WM3_LATENCY() * 500, &sandybridge_display_srwm_info, &sandybridge_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) return; I915_WRITE(WM3_LP_ILK, WM3_LP_EN | (SNB_READ_WM3_LATENCY() << WM1_LP_LATENCY_SHIFT) | (fbc_wm << WM1_LP_FBC_SHIFT) | (plane_wm << WM1_LP_SR_SHIFT) | cursor_wm); } /** * intel_update_watermarks - update FIFO watermark values based on current modes * * Calculate watermark values for the various WM regs based on current mode * and plane configuration. * * There are several cases to deal with here: * - normal (i.e. non-self-refresh) * - self-refresh (SR) mode * - lines are large relative to FIFO size (buffer can hold up to 2) * - lines are small relative to FIFO size (buffer can hold more than 2 * lines), so need to account for TLB latency * * The normal calculation is: * watermark = dotclock * bytes per pixel * latency * where latency is platform & configuration dependent (we assume pessimal * values here). * * The SR calculation is: * watermark = (trunc(latency/line time)+1) * surface width * * bytes per pixel * where * line time = htotal / dotclock * surface width = hdisplay for normal plane and 64 for cursor * and latency is assumed to be high, as above. * * The final value programmed to the register should always be rounded up, * and include an extra 2 entries to account for clock crossings. * * We don't use the sprite, so we can ignore that. And on Crestline we have * to set the non-SR watermarks to 8. */ static void intel_update_watermarks(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (dev_priv->display.update_wm) dev_priv->display.update_wm(dev); } static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) { return dev_priv->lvds_use_ssc && i915_panel_use_ssc && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); } static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; u32 temp; u32 lvds_sync = 0; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; if (encoder->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_DVO: is_dvo = true; break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; case INTEL_OUTPUT_ANALOG: is_crt = true; break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; } num_connectors++; } if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", refclk / 1000); } else if (!IS_GEN2(dev)) { refclk = 96000; } else { refclk = 48000; } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. The returned values represent the clock equation: * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc, refclk); ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; } /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); if (is_lvds && dev_priv->lvds_downclock_avail) { has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &reduced_clock); if (has_reduced_clock && (clock.p != reduced_clock.p)) { /* * If the different P is found, it means that we can't * switch the display clock by using the FP0/FP1. * In such case we will disable the LVDS downclock * feature. */ DRM_DEBUG_KMS("Different P is found for " "LVDS clock/downclock\n"); has_reduced_clock = 0; } } /* SDVO TV has fixed PLL values depend on its clock range, this mirrors vbios setting. */ if (is_sdvo && is_tv) { if (adjusted_mode->clock >= 100000 && adjusted_mode->clock < 140500) { clock.p1 = 2; clock.p2 = 10; clock.n = 3; clock.m1 = 16; clock.m2 = 8; } else if (adjusted_mode->clock >= 140500 && adjusted_mode->clock <= 200000) { clock.p1 = 1; clock.p2 = 10; clock.n = 6; clock.m1 = 12; clock.m2 = 8; } } if (IS_PINEVIEW(dev)) { fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = (1 << reduced_clock.n) << 16 | reduced_clock.m1 << 8 | reduced_clock.m2; } else { fp = clock.n << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | reduced_clock.m2; } dpll = DPLL_VGA_MODE_DIS; if (!IS_GEN2(dev)) { if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); if (pixel_multiplier > 1) { if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dpll |= (pixel_multiplier - 1) << SDVO_MULTIPLIER_SHIFT_HIRES; } dpll |= DPLL_DVO_HIGH_SPEED; } if (is_dp) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ if (IS_PINEVIEW(dev)) dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW; else { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (IS_G4X(dev) && has_reduced_clock) dpll |= (1 << (reduced_clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; } switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (INTEL_INFO(dev)->gen >= 4) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); } else { if (is_lvds) { dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; } else { if (clock.p1 == 2) dpll |= PLL_P1_DIVIDE_BY_TWO; else dpll |= (clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT; if (clock.p2 == 4) dpll |= PLL_P2_DIVIDE_BY_4; } } if (is_sdvo && is_tv) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (is_tv) /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ pipeconf = I915_READ(PIPECONF(pipe)); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; /* Ironlake's plane is forced to pipe, bit 24 is to enable color space conversion */ if (pipe == 0) dspcntr &= ~DISPPLANE_SEL_PIPE_MASK; else dspcntr |= DISPPLANE_SEL_PIPE_B; if (pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) * core speed. * * XXX: No double-wide on 915GM pipe B. Is that the only reason for the * pipe == 0 check? */ if (mode->clock > dev_priv->display.get_display_clock_speed(dev) * 9 / 10) pipeconf |= PIPECONF_DOUBLE_WIDE; else pipeconf &= ~PIPECONF_DOUBLE_WIDE; } dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); I915_WRITE(FP0(pipe), fp); I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); POSTING_READ(DPLL(pipe)); udelay(150); /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { temp = I915_READ(LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (pipe == 1) { temp |= LVDS_PIPEB_SELECT; } else { temp &= ~LVDS_PIPEB_SELECT; } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ /* set the dithering flag on LVDS as needed */ if (INTEL_INFO(dev)->gen >= 4) { if (dev_priv->lvds_dither) temp |= LVDS_ENABLE_DITHER; else temp &= ~LVDS_ENABLE_DITHER; } if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) lvds_sync |= LVDS_HSYNC_POLARITY; if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) lvds_sync |= LVDS_VSYNC_POLARITY; if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) != lvds_sync) { char flags[2] = "-+"; DRM_INFO("Changing LVDS panel from " "(%chsync, %cvsync) to (%chsync, %cvsync)\n", flags[!(temp & LVDS_HSYNC_POLARITY)], flags[!(temp & LVDS_VSYNC_POLARITY)], flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); temp |= lvds_sync; } I915_WRITE(LVDS, temp); } if (is_dp) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } I915_WRITE(DPLL(pipe), dpll); /* Wait for the clocks to stabilize. */ POSTING_READ(DPLL(pipe)); udelay(150); if (INTEL_INFO(dev)->gen >= 4) { temp = 0; if (is_sdvo) { temp = intel_mode_get_pixel_multiplier(adjusted_mode); if (temp > 1) temp = (temp - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT; else temp = 0; } I915_WRITE(DPLL_MD(pipe), temp); } else { /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * * So write it again. */ I915_WRITE(DPLL(pipe), dpll); } intel_crtc->lowfreq_avail = false; if (is_lvds && has_reduced_clock && i915_powersave) { I915_WRITE(FP1(pipe), fp2); intel_crtc->lowfreq_avail = true; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } } else { I915_WRITE(FP1(pipe), fp); if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; } } if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vdisplay -= 1; adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_start -= 1; adjusted_mode->crtc_vblank_end -= 1; adjusted_mode->crtc_vsync_end -= 1; adjusted_mode->crtc_vsync_start -= 1; } else pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */ I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); I915_WRITE(HBLANK(pipe), (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); I915_WRITE(HSYNC(pipe), (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); I915_WRITE(VTOTAL(pipe), (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); I915_WRITE(VBLANK(pipe), (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); I915_WRITE(VSYNC(pipe), (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); /* pipesrc and dspsize control the size that is scaled from, * which should always be the user's requested size. */ I915_WRITE(DSPSIZE(plane), ((mode->vdisplay - 1) << 16) | (mode->hdisplay - 1)); I915_WRITE(DSPPOS(plane), 0); I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); intel_enable_pipe(dev_priv, pipe, false); intel_wait_for_vblank(dev, pipe); I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); intel_update_watermarks(dev); return ret; } static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf; bool ok, has_reduced_clock = false, is_sdvo = false; bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false; struct intel_encoder *has_edp_encoder = NULL; struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; struct fdi_m_n m_n = {0}; u32 temp; u32 lvds_sync = 0; int target_clock, pixel_multiplier, lane, link_bw, bpp, factor; list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { if (encoder->base.crtc != crtc) continue; switch (encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; if (encoder->needs_tv_clock) is_tv = true; break; case INTEL_OUTPUT_TVOUT: is_tv = true; break; case INTEL_OUTPUT_ANALOG: is_crt = true; break; case INTEL_OUTPUT_DISPLAYPORT: is_dp = true; break; case INTEL_OUTPUT_EDP: has_edp_encoder = encoder; break; } num_connectors++; } if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { refclk = dev_priv->lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", refclk / 1000); } else { refclk = 96000; if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) refclk = 120000; /* 120Mhz refclk */ } /* * Returns a set of divisors for the desired target clock with the given * refclk, or FALSE. The returned values represent the clock equation: * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc, refclk); ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock); if (!ok) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; } /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); if (is_lvds && dev_priv->lvds_downclock_avail) { has_reduced_clock = limit->find_pll(limit, crtc, dev_priv->lvds_downclock, refclk, &reduced_clock); if (has_reduced_clock && (clock.p != reduced_clock.p)) { /* * If the different P is found, it means that we can't * switch the display clock by using the FP0/FP1. * In such case we will disable the LVDS downclock * feature. */ DRM_DEBUG_KMS("Different P is found for " "LVDS clock/downclock\n"); has_reduced_clock = 0; } } /* SDVO TV has fixed PLL values depend on its clock range, this mirrors vbios setting. */ if (is_sdvo && is_tv) { if (adjusted_mode->clock >= 100000 && adjusted_mode->clock < 140500) { clock.p1 = 2; clock.p2 = 10; clock.n = 3; clock.m1 = 16; clock.m2 = 8; } else if (adjusted_mode->clock >= 140500 && adjusted_mode->clock <= 200000) { clock.p1 = 1; clock.p2 = 10; clock.n = 6; clock.m1 = 12; clock.m2 = 8; } } /* FDI link */ pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); lane = 0; /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { target_clock = mode->clock; intel_edp_link_config(has_edp_encoder, &lane, &link_bw); } else { /* [e]DP over FDI requires target mode clock instead of link clock */ if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) target_clock = mode->clock; else target_clock = adjusted_mode->clock; /* FDI is a binary signal running at ~2.7GHz, encoding * each output octet as 10 bits. The actual frequency * is stored as a divider into a 100MHz clock, and the * mode pixel clock is stored in units of 1KHz. * Hence the bw of each lane in terms of the mode signal * is: */ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; } /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; if (is_lvds) { /* the BPC will be 6 if it is 18-bit LVDS panel */ if ((I915_READ(PCH_LVDS) & LVDS_A3_POWER_MASK) == LVDS_A3_POWER_UP) temp |= PIPE_8BPC; else temp |= PIPE_6BPC; } else if (has_edp_encoder) { switch (dev_priv->edp.bpp/3) { case 8: temp |= PIPE_8BPC; break; case 10: temp |= PIPE_10BPC; break; case 6: temp |= PIPE_6BPC; break; case 12: temp |= PIPE_12BPC; break; } } else temp |= PIPE_8BPC; I915_WRITE(PIPECONF(pipe), temp); switch (temp & PIPE_BPC_MASK) { case PIPE_8BPC: bpp = 24; break; case PIPE_10BPC: bpp = 30; break; case PIPE_6BPC: bpp = 18; break; case PIPE_12BPC: bpp = 36; break; default: DRM_ERROR("unknown pipe bpc value\n"); bpp = 24; } if (!lane) { /* * Account for spread spectrum to avoid * oversubscribing the link. Max center spread * is 2.5%; use 5% for safety's sake. */ u32 bps = target_clock * bpp * 21 / 20; lane = bps / (link_bw * 8) + 1; } intel_crtc->fdi_lanes = lane; if (pixel_multiplier > 1) link_bw *= pixel_multiplier; ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after * PCH B stepping, previous chipset stepping should be * ignoring this setting. */ temp = I915_READ(PCH_DREF_CONTROL); /* Always enable nonspread source */ temp &= ~DREF_NONSPREAD_SOURCE_MASK; temp |= DREF_NONSPREAD_SOURCE_ENABLE; temp &= ~DREF_SSC_SOURCE_MASK; temp |= DREF_SSC_SOURCE_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); udelay(200); if (has_edp_encoder) { if (intel_panel_use_ssc(dev_priv)) { temp |= DREF_SSC1_ENABLE; I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); udelay(200); } temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK; /* Enable CPU source on CPU attached eDP */ if (!intel_encoder_is_pch_edp(&has_edp_encoder->base)) { if (intel_panel_use_ssc(dev_priv)) temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD; else temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD; } else { /* Enable SSC on PCH eDP if needed */ if (intel_panel_use_ssc(dev_priv)) { DRM_ERROR("enabling SSC on PCH\n"); temp |= DREF_SUPERSPREAD_SOURCE_ENABLE; } } I915_WRITE(PCH_DREF_CONTROL, temp); POSTING_READ(PCH_DREF_CONTROL); udelay(200); } fp = clock.n << 16 | clock.m1 << 8 | clock.m2; if (has_reduced_clock) fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | reduced_clock.m2; /* Enable autotuning of the PLL clock (if permissible) */ factor = 21; if (is_lvds) { if ((intel_panel_use_ssc(dev_priv) && dev_priv->lvds_ssc_freq == 100) || (I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP) factor = 25; } else if (is_sdvo && is_tv) factor = 20; if (clock.m < factor * clock.n) fp |= FP_CB_TUNE; dpll = 0; if (is_lvds) dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; if (is_sdvo) { int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); if (pixel_multiplier > 1) { dpll |= (pixel_multiplier - 1) << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; } dpll |= DPLL_DVO_HIGH_SPEED; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; /* also FPA1 */ dpll |= (1 << (clock.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; switch (clock.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; case 7: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7; break; case 10: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10; break; case 14: dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14; break; } if (is_sdvo && is_tv) dpll |= PLL_REF_INPUT_TVCLKINBC; else if (is_tv) /* XXX: just matching BIOS for now */ /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ dpll |= 3; else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; /* setup pipeconf */ pipeconf = I915_READ(PIPECONF(pipe)); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); /* PCH eDP needs FDI, but CPU eDP does not */ if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { I915_WRITE(PCH_FP0(pipe), fp); I915_WRITE(PCH_DPLL(pipe), dpll & ~DPLL_VCO_ENABLE); POSTING_READ(PCH_DPLL(pipe)); udelay(150); } /* enable transcoder DPLL */ if (HAS_PCH_CPT(dev)) { temp = I915_READ(PCH_DPLL_SEL); switch (pipe) { case 0: temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL; break; case 1: temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL; break; case 2: /* FIXME: manage transcoder PLLs? */ temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL; break; default: BUG(); } I915_WRITE(PCH_DPLL_SEL, temp); POSTING_READ(PCH_DPLL_SEL); udelay(150); } /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. */ if (is_lvds) { temp = I915_READ(PCH_LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; if (pipe == 1) { if (HAS_PCH_CPT(dev)) temp |= PORT_TRANS_B_SEL_CPT; else temp |= LVDS_PIPEB_SELECT; } else { if (HAS_PCH_CPT(dev)) temp &= ~PORT_TRANS_SEL_MASK; else temp &= ~LVDS_PIPEB_SELECT; } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; /* Set the B0-B3 data pairs corresponding to whether we're going to * set the DPLLs for dual-channel mode or not. */ if (clock.p2 == 7) temp |= LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP; else temp &= ~(LVDS_B0B3_POWER_UP | LVDS_CLKB_POWER_UP); /* It would be nice to set 24 vs 18-bit mode (LVDS_A3_POWER_UP) * appropriately here, but we need to look more thoroughly into how * panels behave in the two modes. */ if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) lvds_sync |= LVDS_HSYNC_POLARITY; if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) lvds_sync |= LVDS_VSYNC_POLARITY; if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) != lvds_sync) { char flags[2] = "-+"; DRM_INFO("Changing LVDS panel from " "(%chsync, %cvsync) to (%chsync, %cvsync)\n", flags[!(temp & LVDS_HSYNC_POLARITY)], flags[!(temp & LVDS_VSYNC_POLARITY)], flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); temp |= lvds_sync; } I915_WRITE(PCH_LVDS, temp); } /* set the dithering flag and clear for anything other than a panel. */ pipeconf &= ~PIPECONF_DITHER_EN; pipeconf &= ~PIPECONF_DITHER_TYPE_MASK; if (dev_priv->lvds_dither && (is_lvds || has_edp_encoder)) { pipeconf |= PIPECONF_DITHER_EN; pipeconf |= PIPECONF_DITHER_TYPE_ST1; } if (is_dp || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { intel_dp_set_m_n(crtc, mode, adjusted_mode); } else { /* For non-DP output, clear any trans DP clock recovery setting.*/ I915_WRITE(TRANSDATA_M1(pipe), 0); I915_WRITE(TRANSDATA_N1(pipe), 0); I915_WRITE(TRANSDPLINK_M1(pipe), 0); I915_WRITE(TRANSDPLINK_N1(pipe), 0); } if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { I915_WRITE(PCH_DPLL(pipe), dpll); /* Wait for the clocks to stabilize. */ POSTING_READ(PCH_DPLL(pipe)); udelay(150); /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * * So write it again. */ I915_WRITE(PCH_DPLL(pipe), dpll); } intel_crtc->lowfreq_avail = false; if (is_lvds && has_reduced_clock && i915_powersave) { I915_WRITE(PCH_FP1(pipe), fp2); intel_crtc->lowfreq_avail = true; if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("enabling CxSR downclocking\n"); pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } } else { I915_WRITE(PCH_FP1(pipe), fp); if (HAS_PIPE_CXSR(dev)) { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; } } if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; /* the chip adds 2 halflines automatically */ adjusted_mode->crtc_vdisplay -= 1; adjusted_mode->crtc_vtotal -= 1; adjusted_mode->crtc_vblank_start -= 1; adjusted_mode->crtc_vblank_end -= 1; adjusted_mode->crtc_vsync_end -= 1; adjusted_mode->crtc_vsync_start -= 1; } else pipeconf &= ~PIPECONF_INTERLACE_W_FIELD_INDICATION; /* progressive */ I915_WRITE(HTOTAL(pipe), (adjusted_mode->crtc_hdisplay - 1) | ((adjusted_mode->crtc_htotal - 1) << 16)); I915_WRITE(HBLANK(pipe), (adjusted_mode->crtc_hblank_start - 1) | ((adjusted_mode->crtc_hblank_end - 1) << 16)); I915_WRITE(HSYNC(pipe), (adjusted_mode->crtc_hsync_start - 1) | ((adjusted_mode->crtc_hsync_end - 1) << 16)); I915_WRITE(VTOTAL(pipe), (adjusted_mode->crtc_vdisplay - 1) | ((adjusted_mode->crtc_vtotal - 1) << 16)); I915_WRITE(VBLANK(pipe), (adjusted_mode->crtc_vblank_start - 1) | ((adjusted_mode->crtc_vblank_end - 1) << 16)); I915_WRITE(VSYNC(pipe), (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); /* pipesrc controls the size that is scaled from, which should * always be the user's requested size. */ I915_WRITE(PIPESRC(pipe), ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); I915_WRITE(PIPE_DATA_M1(pipe), TU_SIZE(m_n.tu) | m_n.gmch_m); I915_WRITE(PIPE_DATA_N1(pipe), m_n.gmch_n); I915_WRITE(PIPE_LINK_M1(pipe), m_n.link_m); I915_WRITE(PIPE_LINK_N1(pipe), m_n.link_n); if (has_edp_encoder && !intel_encoder_is_pch_edp(&has_edp_encoder->base)) { ironlake_set_pll_edp(crtc, adjusted_mode->clock); } I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); intel_wait_for_vblank(dev, pipe); if (IS_GEN5(dev)) { /* enable address swizzle for tiling buffer */ temp = I915_READ(DISP_ARB_CTL); I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING); } I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); ret = intel_pipe_set_base(crtc, x, y, old_fb); intel_update_watermarks(dev); return ret; } static int intel_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode, int x, int y, struct drm_framebuffer *old_fb) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int ret; drm_vblank_pre_modeset(dev, pipe); ret = dev_priv->display.crtc_mode_set(crtc, mode, adjusted_mode, x, y, old_fb); drm_vblank_post_modeset(dev, pipe); return ret; } /** Loads the palette/gamma unit for the CRTC with the prepared values */ void intel_crtc_load_lut(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int palreg = PALETTE(intel_crtc->pipe); int i; /* The clocks have to be on to load the palette. */ if (!crtc->enabled || !intel_crtc->active) return; /* use legacy palette for Ironlake */ if (HAS_PCH_SPLIT(dev)) palreg = LGC_PALETTE(intel_crtc->pipe); for (i = 0; i < 256; i++) { I915_WRITE(palreg + 4 * i, (intel_crtc->lut_r[i] << 16) | (intel_crtc->lut_g[i] << 8) | intel_crtc->lut_b[i]); } } static void i845_update_cursor(struct drm_crtc *crtc, u32 base) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); bool visible = base != 0; u32 cntl; if (intel_crtc->cursor_visible == visible) return; cntl = I915_READ(_CURACNTR); if (visible) { /* On these chipsets we can only modify the base whilst * the cursor is disabled. */ I915_WRITE(_CURABASE, base); cntl &= ~(CURSOR_FORMAT_MASK); /* XXX width must be 64, stride 256 => 0x00 << 28 */ cntl |= CURSOR_ENABLE | CURSOR_GAMMA_ENABLE | CURSOR_FORMAT_ARGB; } else cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); I915_WRITE(_CURACNTR, cntl); intel_crtc->cursor_visible = visible; } static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool visible = base != 0; if (intel_crtc->cursor_visible != visible) { uint32_t cntl = I915_READ(CURCNTR(pipe)); if (base) { cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; cntl |= pipe << 28; /* Connect to correct pipe */ } else { cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); cntl |= CURSOR_MODE_DISABLE; } I915_WRITE(CURCNTR(pipe), cntl); intel_crtc->cursor_visible = visible; } /* and commit changes on next vblank */ I915_WRITE(CURBASE(pipe), base); } static void ivb_update_cursor(struct drm_crtc *crtc, u32 base) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; bool visible = base != 0; if (intel_crtc->cursor_visible != visible) { uint32_t cntl = I915_READ(CURCNTR_IVB(pipe)); if (base) { cntl &= ~CURSOR_MODE; cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; } else { cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); cntl |= CURSOR_MODE_DISABLE; } I915_WRITE(CURCNTR_IVB(pipe), cntl); intel_crtc->cursor_visible = visible; } /* and commit changes on next vblank */ I915_WRITE(CURBASE_IVB(pipe), base); } /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int x = intel_crtc->cursor_x; int y = intel_crtc->cursor_y; u32 base, pos; bool visible; pos = 0; if (on && crtc->enabled && crtc->fb) { base = intel_crtc->cursor_addr; if (x > (int) crtc->fb->width) base = 0; if (y > (int) crtc->fb->height) base = 0; } else base = 0; if (x < 0) { if (x + intel_crtc->cursor_width < 0) base = 0; pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT; x = -x; } pos |= x << CURSOR_X_SHIFT; if (y < 0) { if (y + intel_crtc->cursor_height < 0) base = 0; pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT; y = -y; } pos |= y << CURSOR_Y_SHIFT; visible = base != 0; if (!visible && !intel_crtc->cursor_visible) return; if (IS_IVYBRIDGE(dev)) { I915_WRITE(CURPOS_IVB(pipe), pos); ivb_update_cursor(crtc, base); } else { I915_WRITE(CURPOS(pipe), pos); if (IS_845G(dev) || IS_I865G(dev)) i845_update_cursor(crtc, base); else i9xx_update_cursor(crtc, base); } if (visible) intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj); } static int intel_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file, uint32_t handle, uint32_t width, uint32_t height) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_i915_gem_object *obj; uint32_t addr; int ret; DRM_DEBUG_KMS("\n"); /* if we want to turn off the cursor ignore width and height */ if (!handle) { DRM_DEBUG_KMS("cursor off\n"); addr = 0; obj = NULL; mutex_lock(&dev->struct_mutex); goto finish; } /* Currently we only support 64x64 cursors */ if (width != 64 || height != 64) { DRM_ERROR("we currently only support 64x64 cursors\n"); return -EINVAL; } obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle)); if (&obj->base == NULL) return -ENOENT; if (obj->base.size < width * height * 4) { DRM_ERROR("buffer is to small\n"); ret = -ENOMEM; goto fail; } /* we only need to pin inside GTT if cursor is non-phy */ mutex_lock(&dev->struct_mutex); if (!dev_priv->info->cursor_needs_physical) { if (obj->tiling_mode) { DRM_ERROR("cursor cannot be tiled\n"); ret = -EINVAL; goto fail_locked; } ret = i915_gem_object_pin(obj, PAGE_SIZE, true); if (ret) { DRM_ERROR("failed to pin cursor bo\n"); goto fail_locked; } ret = i915_gem_object_set_to_gtt_domain(obj, 0); if (ret) { DRM_ERROR("failed to move cursor bo into the GTT\n"); goto fail_unpin; } ret = i915_gem_object_put_fence(obj); if (ret) { DRM_ERROR("failed to move cursor bo into the GTT\n"); goto fail_unpin; } addr = obj->gtt_offset; } else { int align = IS_I830(dev) ? 16 * 1024 : 256; ret = i915_gem_attach_phys_object(dev, obj, (intel_crtc->pipe == 0) ? I915_GEM_PHYS_CURSOR_0 : I915_GEM_PHYS_CURSOR_1, align); if (ret) { DRM_ERROR("failed to attach phys object\n"); goto fail_locked; } addr = obj->phys_obj->handle->busaddr; } if (IS_GEN2(dev)) I915_WRITE(CURSIZE, (height << 12) | width); finish: if (intel_crtc->cursor_bo) { if (dev_priv->info->cursor_needs_physical) { if (intel_crtc->cursor_bo != obj) i915_gem_detach_phys_object(dev, intel_crtc->cursor_bo); } else i915_gem_object_unpin(intel_crtc->cursor_bo); drm_gem_object_unreference(&intel_crtc->cursor_bo->base); } mutex_unlock(&dev->struct_mutex); intel_crtc->cursor_addr = addr; intel_crtc->cursor_bo = obj; intel_crtc->cursor_width = width; intel_crtc->cursor_height = height; intel_crtc_update_cursor(crtc, true); return 0; fail_unpin: i915_gem_object_unpin(obj); fail_locked: mutex_unlock(&dev->struct_mutex); fail: drm_gem_object_unreference_unlocked(&obj->base); return ret; } static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); intel_crtc->cursor_x = x; intel_crtc->cursor_y = y; intel_crtc_update_cursor(crtc, true); return 0; } /** Sets the color ramps on behalf of RandR */ void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green, u16 blue, int regno) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); intel_crtc->lut_r[regno] = red >> 8; intel_crtc->lut_g[regno] = green >> 8; intel_crtc->lut_b[regno] = blue >> 8; } void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, int regno) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); *red = intel_crtc->lut_r[regno] << 8; *green = intel_crtc->lut_g[regno] << 8; *blue = intel_crtc->lut_b[regno] << 8; } static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue, uint32_t start, uint32_t size) { int end = (start + size > 256) ? 256 : start + size, i; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); for (i = start; i < end; i++) { intel_crtc->lut_r[i] = red[i] >> 8; intel_crtc->lut_g[i] = green[i] >> 8; intel_crtc->lut_b[i] = blue[i] >> 8; } intel_crtc_load_lut(crtc); } /** * Get a pipe with a simple mode set on it for doing load-based monitor * detection. * * It will be up to the load-detect code to adjust the pipe as appropriate for * its requirements. The pipe will be connected to no other encoders. * * Currently this code will only succeed if there is a pipe with no encoders * configured for it. In the future, it could choose to temporarily disable * some outputs to free up a pipe for its use. * * \return crtc, or NULL if no pipes are available. */ /* VESA 640x480x72Hz mode to set on the pipe */ static struct drm_display_mode load_detect_mode = { DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664, 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC), }; static struct drm_framebuffer * intel_framebuffer_create(struct drm_device *dev, struct drm_mode_fb_cmd *mode_cmd, struct drm_i915_gem_object *obj) { struct intel_framebuffer *intel_fb; int ret; intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); if (!intel_fb) { drm_gem_object_unreference_unlocked(&obj->base); return ERR_PTR(-ENOMEM); } ret = intel_framebuffer_init(dev, intel_fb, mode_cmd, obj); if (ret) { drm_gem_object_unreference_unlocked(&obj->base); kfree(intel_fb); return ERR_PTR(ret); } return &intel_fb->base; } static u32 intel_framebuffer_pitch_for_width(int width, int bpp) { u32 pitch = DIV_ROUND_UP(width * bpp, 8); return ALIGN(pitch, 64); } static u32 intel_framebuffer_size_for_mode(struct drm_display_mode *mode, int bpp) { u32 pitch = intel_framebuffer_pitch_for_width(mode->hdisplay, bpp); return ALIGN(pitch * mode->vdisplay, PAGE_SIZE); } static struct drm_framebuffer * intel_framebuffer_create_for_mode(struct drm_device *dev, struct drm_display_mode *mode, int depth, int bpp) { struct drm_i915_gem_object *obj; struct drm_mode_fb_cmd mode_cmd; obj = i915_gem_alloc_object(dev, intel_framebuffer_size_for_mode(mode, bpp)); if (obj == NULL) return ERR_PTR(-ENOMEM); mode_cmd.width = mode->hdisplay; mode_cmd.height = mode->vdisplay; mode_cmd.depth = depth; mode_cmd.bpp = bpp; mode_cmd.pitch = intel_framebuffer_pitch_for_width(mode_cmd.width, bpp); return intel_framebuffer_create(dev, &mode_cmd, obj); } static struct drm_framebuffer * mode_fits_in_fbdev(struct drm_device *dev, struct drm_display_mode *mode) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; struct drm_framebuffer *fb; if (dev_priv->fbdev == NULL) return NULL; obj = dev_priv->fbdev->ifb.obj; if (obj == NULL) return NULL; fb = &dev_priv->fbdev->ifb.base; if (fb->pitch < intel_framebuffer_pitch_for_width(mode->hdisplay, fb->bits_per_pixel)) return NULL; if (obj->base.size < mode->vdisplay * fb->pitch) return NULL; return fb; } bool intel_get_load_detect_pipe(struct intel_encoder *intel_encoder, struct drm_connector *connector, struct drm_display_mode *mode, struct intel_load_detect_pipe *old) { struct intel_crtc *intel_crtc; struct drm_crtc *possible_crtc; struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = NULL; struct drm_device *dev = encoder->dev; struct drm_framebuffer *old_fb; int i = -1; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), encoder->base.id, drm_get_encoder_name(encoder)); /* * Algorithm gets a little messy: * * - if the connector already has an assigned crtc, use it (but make * sure it's on first) * * - try to find the first unused crtc that can drive this connector, * and use that if we find one */ /* See if we already have a CRTC for this connector */ if (encoder->crtc) { crtc = encoder->crtc; intel_crtc = to_intel_crtc(crtc); old->dpms_mode = intel_crtc->dpms_mode; old->load_detect_temp = false; /* Make sure the crtc and connector are running */ if (intel_crtc->dpms_mode != DRM_MODE_DPMS_ON) { struct drm_encoder_helper_funcs *encoder_funcs; struct drm_crtc_helper_funcs *crtc_funcs; crtc_funcs = crtc->helper_private; crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON); encoder_funcs = encoder->helper_private; encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON); } return true; } /* Find an unused one (if possible) */ list_for_each_entry(possible_crtc, &dev->mode_config.crtc_list, head) { i++; if (!(encoder->possible_crtcs & (1 << i))) continue; if (!possible_crtc->enabled) { crtc = possible_crtc; break; } } /* * If we didn't find an unused CRTC, don't use any. */ if (!crtc) { DRM_DEBUG_KMS("no pipe available for load-detect\n"); return false; } encoder->crtc = crtc; connector->encoder = encoder; intel_crtc = to_intel_crtc(crtc); old->dpms_mode = intel_crtc->dpms_mode; old->load_detect_temp = true; old->release_fb = NULL; if (!mode) mode = &load_detect_mode; old_fb = crtc->fb; /* We need a framebuffer large enough to accommodate all accesses * that the plane may generate whilst we perform load detection. * We can not rely on the fbcon either being present (we get called * during its initialisation to detect all boot displays, or it may * not even exist) or that it is large enough to satisfy the * requested mode. */ crtc->fb = mode_fits_in_fbdev(dev, mode); if (crtc->fb == NULL) { DRM_DEBUG_KMS("creating tmp fb for load-detection\n"); crtc->fb = intel_framebuffer_create_for_mode(dev, mode, 24, 32); old->release_fb = crtc->fb; } else DRM_DEBUG_KMS("reusing fbdev for load-detection framebuffer\n"); if (IS_ERR(crtc->fb)) { DRM_DEBUG_KMS("failed to allocate framebuffer for load-detection\n"); crtc->fb = old_fb; return false; } if (!drm_crtc_helper_set_mode(crtc, mode, 0, 0, old_fb)) { DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n"); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); crtc->fb = old_fb; return false; } /* let the connector get through one full cycle before testing */ intel_wait_for_vblank(dev, intel_crtc->pipe); return true; } void intel_release_load_detect_pipe(struct intel_encoder *intel_encoder, struct drm_connector *connector, struct intel_load_detect_pipe *old) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_device *dev = encoder->dev; struct drm_crtc *crtc = encoder->crtc; struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private; struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private; DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n", connector->base.id, drm_get_connector_name(connector), encoder->base.id, drm_get_encoder_name(encoder)); if (old->load_detect_temp) { connector->encoder = NULL; drm_helper_disable_unused_functions(dev); if (old->release_fb) old->release_fb->funcs->destroy(old->release_fb); return; } /* Switch crtc and encoder back off if necessary */ if (old->dpms_mode != DRM_MODE_DPMS_ON) { encoder_funcs->dpms(encoder, old->dpms_mode); crtc_funcs->dpms(crtc, old->dpms_mode); } } /* Returns the clock of the currently programmed mode of the given pipe. */ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; u32 dpll = I915_READ(DPLL(pipe)); u32 fp; intel_clock_t clock; if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) fp = I915_READ(FP0(pipe)); else fp = I915_READ(FP1(pipe)); clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; if (IS_PINEVIEW(dev)) { clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1; clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT; } else { clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT; clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT; } if (!IS_GEN2(dev)) { if (IS_PINEVIEW(dev)) clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >> DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW); else clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >> DPLL_FPA01_P1_POST_DIV_SHIFT); switch (dpll & DPLL_MODE_MASK) { case DPLLB_MODE_DAC_SERIAL: clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ? 5 : 10; break; case DPLLB_MODE_LVDS: clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ? 7 : 14; break; default: DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed " "mode\n", (int)(dpll & DPLL_MODE_MASK)); return 0; } /* XXX: Handle the 100Mhz refclk */ intel_clock(dev, 96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); if (is_lvds) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); clock.p2 = 14; if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ intel_clock(dev, 66000, &clock); } else intel_clock(dev, 48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; else { clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >> DPLL_FPA01_P1_POST_DIV_SHIFT) + 2; } if (dpll & PLL_P2_DIVIDE_BY_4) clock.p2 = 4; else clock.p2 = 2; intel_clock(dev, 48000, &clock); } } /* XXX: It would be nice to validate the clocks, but we can't reuse * i830PllIsValid() because it relies on the xf86_config connector * configuration being accurate, which it isn't necessarily. */ return clock.dot; } /** Returns the currently programmed mode of the given pipe. */ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; struct drm_display_mode *mode; int htot = I915_READ(HTOTAL(pipe)); int hsync = I915_READ(HSYNC(pipe)); int vtot = I915_READ(VTOTAL(pipe)); int vsync = I915_READ(VSYNC(pipe)); mode = kzalloc(sizeof(*mode), GFP_KERNEL); if (!mode) return NULL; mode->clock = intel_crtc_clock_get(dev, crtc); mode->hdisplay = (htot & 0xffff) + 1; mode->htotal = ((htot & 0xffff0000) >> 16) + 1; mode->hsync_start = (hsync & 0xffff) + 1; mode->hsync_end = ((hsync & 0xffff0000) >> 16) + 1; mode->vdisplay = (vtot & 0xffff) + 1; mode->vtotal = ((vtot & 0xffff0000) >> 16) + 1; mode->vsync_start = (vsync & 0xffff) + 1; mode->vsync_end = ((vsync & 0xffff0000) >> 16) + 1; drm_mode_set_name(mode); drm_mode_set_crtcinfo(mode, 0); return mode; } #define GPU_IDLE_TIMEOUT 500 /* ms */ /* When this timer fires, we've been idle for awhile */ static void intel_gpu_idle_timer(unsigned long arg) { struct drm_device *dev = (struct drm_device *)arg; drm_i915_private_t *dev_priv = dev->dev_private; if (!list_empty(&dev_priv->mm.active_list)) { /* Still processing requests, so just re-arm the timer. */ mod_timer(&dev_priv->idle_timer, jiffies + msecs_to_jiffies(GPU_IDLE_TIMEOUT)); return; } dev_priv->busy = false; queue_work(dev_priv->wq, &dev_priv->idle_work); } #define CRTC_IDLE_TIMEOUT 1000 /* ms */ static void intel_crtc_idle_timer(unsigned long arg) { struct intel_crtc *intel_crtc = (struct intel_crtc *)arg; struct drm_crtc *crtc = &intel_crtc->base; drm_i915_private_t *dev_priv = crtc->dev->dev_private; struct intel_framebuffer *intel_fb; intel_fb = to_intel_framebuffer(crtc->fb); if (intel_fb && intel_fb->obj->active) { /* The framebuffer is still being accessed by the GPU. */ mod_timer(&intel_crtc->idle_timer, jiffies + msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); return; } intel_crtc->busy = false; queue_work(dev_priv->wq, &dev_priv->idle_work); } static void intel_increase_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int dpll_reg = DPLL(pipe); int dpll; if (HAS_PCH_SPLIT(dev)) return; if (!dev_priv->lvds_downclock_avail) return; dpll = I915_READ(dpll_reg); if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) { DRM_DEBUG_DRIVER("upclocking LVDS\n"); /* Unlock panel regs */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS); dpll &= ~DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); intel_wait_for_vblank(dev, pipe); dpll = I915_READ(dpll_reg); if (dpll & DISPLAY_RATE_SELECT_FPA1) DRM_DEBUG_DRIVER("failed to upclock LVDS!\n"); /* ...and lock them again */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3); } /* Schedule downclock */ mod_timer(&intel_crtc->idle_timer, jiffies + msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); } static void intel_decrease_pllclock(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int dpll_reg = DPLL(pipe); int dpll = I915_READ(dpll_reg); if (HAS_PCH_SPLIT(dev)) return; if (!dev_priv->lvds_downclock_avail) return; /* * Since this is called by a timer, we should never get here in * the manual case. */ if (!HAS_PIPE_CXSR(dev) && intel_crtc->lowfreq_avail) { DRM_DEBUG_DRIVER("downclocking LVDS\n"); /* Unlock panel regs */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS); dpll |= DISPLAY_RATE_SELECT_FPA1; I915_WRITE(dpll_reg, dpll); intel_wait_for_vblank(dev, pipe); dpll = I915_READ(dpll_reg); if (!(dpll & DISPLAY_RATE_SELECT_FPA1)) DRM_DEBUG_DRIVER("failed to downclock LVDS!\n"); /* ...and lock them again */ I915_WRITE(PP_CONTROL, I915_READ(PP_CONTROL) & 0x3); } } /** * intel_idle_update - adjust clocks for idleness * @work: work struct * * Either the GPU or display (or both) went idle. Check the busy status * here and adjust the CRTC and GPU clocks as necessary. */ static void intel_idle_update(struct work_struct *work) { drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, idle_work); struct drm_device *dev = dev_priv->dev; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; if (!i915_powersave) return; mutex_lock(&dev->struct_mutex); i915_update_gfx_val(dev_priv); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); if (!intel_crtc->busy) intel_decrease_pllclock(crtc); } mutex_unlock(&dev->struct_mutex); } /** * intel_mark_busy - mark the GPU and possibly the display busy * @dev: drm device * @obj: object we're operating on * * Callers can use this function to indicate that the GPU is busy processing * commands. If @obj matches one of the CRTC objects (i.e. it's a scanout * buffer), we'll also mark the display as busy, so we know to increase its * clock frequency. */ void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = NULL; struct intel_framebuffer *intel_fb; struct intel_crtc *intel_crtc; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return; if (!dev_priv->busy) dev_priv->busy = true; else mod_timer(&dev_priv->idle_timer, jiffies + msecs_to_jiffies(GPU_IDLE_TIMEOUT)); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); intel_fb = to_intel_framebuffer(crtc->fb); if (intel_fb->obj == obj) { if (!intel_crtc->busy) { /* Non-busy -> busy, upclock */ intel_increase_pllclock(crtc); intel_crtc->busy = true; } else { /* Busy -> busy, put off timer */ mod_timer(&intel_crtc->idle_timer, jiffies + msecs_to_jiffies(CRTC_IDLE_TIMEOUT)); } } } } static void intel_crtc_destroy(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_device *dev = crtc->dev; struct intel_unpin_work *work; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); work = intel_crtc->unpin_work; intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); if (work) { cancel_work_sync(&work->work); kfree(work); } drm_crtc_cleanup(crtc); kfree(intel_crtc); } static void intel_unpin_work_fn(struct work_struct *__work) { struct intel_unpin_work *work = container_of(__work, struct intel_unpin_work, work); mutex_lock(&work->dev->struct_mutex); i915_gem_object_unpin(work->old_fb_obj); drm_gem_object_unreference(&work->pending_flip_obj->base); drm_gem_object_unreference(&work->old_fb_obj->base); mutex_unlock(&work->dev->struct_mutex); kfree(work); } static void do_intel_finish_page_flip(struct drm_device *dev, struct drm_crtc *crtc) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; struct drm_i915_gem_object *obj; struct drm_pending_vblank_event *e; struct timeval tnow, tvbl; unsigned long flags; /* Ignore early vblank irqs */ if (intel_crtc == NULL) return; do_gettimeofday(&tnow); spin_lock_irqsave(&dev->event_lock, flags); work = intel_crtc->unpin_work; if (work == NULL || !work->pending) { spin_unlock_irqrestore(&dev->event_lock, flags); return; } intel_crtc->unpin_work = NULL; if (work->event) { e = work->event; e->event.sequence = drm_vblank_count_and_time(dev, intel_crtc->pipe, &tvbl); /* Called before vblank count and timestamps have * been updated for the vblank interval of flip * completion? Need to increment vblank count and * add one videorefresh duration to returned timestamp * to account for this. We assume this happened if we * get called over 0.9 frame durations after the last * timestamped vblank. * * This calculation can not be used with vrefresh rates * below 5Hz (10Hz to be on the safe side) without * promoting to 64 integers. */ if (10 * (timeval_to_ns(&tnow) - timeval_to_ns(&tvbl)) > 9 * crtc->framedur_ns) { e->event.sequence++; tvbl = ns_to_timeval(timeval_to_ns(&tvbl) + crtc->framedur_ns); } e->event.tv_sec = tvbl.tv_sec; e->event.tv_usec = tvbl.tv_usec; list_add_tail(&e->base.link, &e->base.file_priv->event_list); wake_up_interruptible(&e->base.file_priv->event_wait); } drm_vblank_put(dev, intel_crtc->pipe); spin_unlock_irqrestore(&dev->event_lock, flags); obj = work->old_fb_obj; atomic_clear_mask(1 << intel_crtc->plane, &obj->pending_flip.counter); if (atomic_read(&obj->pending_flip) == 0) wake_up(&dev_priv->pending_flip_queue); schedule_work(&work->work); trace_i915_flip_complete(intel_crtc->plane, work->pending_flip_obj); } void intel_finish_page_flip(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; do_intel_finish_page_flip(dev, crtc); } void intel_finish_page_flip_plane(struct drm_device *dev, int plane) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_crtc *crtc = dev_priv->plane_to_crtc_mapping[plane]; do_intel_finish_page_flip(dev, crtc); } void intel_prepare_page_flip(struct drm_device *dev, int plane) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(dev_priv->plane_to_crtc_mapping[plane]); unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { if ((++intel_crtc->unpin_work->pending) > 1) DRM_ERROR("Prepared flip multiple times\n"); } else { DRM_DEBUG_DRIVER("preparing flip with no unpin work?\n"); } spin_unlock_irqrestore(&dev->event_lock, flags); } static int intel_gen2_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); unsigned long offset; u32 flip_mask; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; /* Offset into the new buffer for cases of shared fbs between CRTCs */ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; ret = BEGIN_LP_RING(6); if (ret) goto out; /* Can't queue multiple flips, so wait for the previous * one to finish before executing the next. */ if (intel_crtc->plane) flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; else flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); OUT_RING(MI_NOOP); OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); OUT_RING(obj->gtt_offset + offset); OUT_RING(MI_NOOP); ADVANCE_LP_RING(); out: return ret; } static int intel_gen3_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); unsigned long offset; u32 flip_mask; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; /* Offset into the new buffer for cases of shared fbs between CRTCs */ offset = crtc->y * fb->pitch + crtc->x * fb->bits_per_pixel/8; ret = BEGIN_LP_RING(6); if (ret) goto out; if (intel_crtc->plane) flip_mask = MI_WAIT_FOR_PLANE_B_FLIP; else flip_mask = MI_WAIT_FOR_PLANE_A_FLIP; OUT_RING(MI_WAIT_FOR_EVENT | flip_mask); OUT_RING(MI_NOOP); OUT_RING(MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); OUT_RING(obj->gtt_offset + offset); OUT_RING(MI_NOOP); ADVANCE_LP_RING(); out: return ret; } static int intel_gen4_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; ret = BEGIN_LP_RING(4); if (ret) goto out; /* i965+ uses the linear or tiled offsets from the * Display Registers (which do not change across a page-flip) * so we need only reprogram the base address. */ OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch); OUT_RING(obj->gtt_offset | obj->tiling_mode); /* XXX Enabling the panel-fitter across page-flip is so far * untested on non-native modes, so ignore it for now. * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; */ pf = 0; pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); ADVANCE_LP_RING(); out: return ret; } static int intel_gen6_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t pf, pipesrc; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, LP_RING(dev_priv)); if (ret) goto out; ret = BEGIN_LP_RING(4); if (ret) goto out; OUT_RING(MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane)); OUT_RING(fb->pitch | obj->tiling_mode); OUT_RING(obj->gtt_offset); pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE; pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); ADVANCE_LP_RING(); out: return ret; } /* * On gen7 we currently use the blit ring because (in early silicon at least) * the render ring doesn't give us interrpts for page flip completion, which * means clients will hang after the first flip is queued. Fortunately the * blit ring generates interrupts properly, so use it instead. */ static int intel_gen7_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_ring_buffer *ring = &dev_priv->ring[BCS]; int ret; ret = intel_pin_and_fence_fb_obj(dev, obj, ring); if (ret) goto out; ret = intel_ring_begin(ring, 4); if (ret) goto out; intel_ring_emit(ring, MI_DISPLAY_FLIP_I915 | (intel_crtc->plane << 19)); intel_ring_emit(ring, (fb->pitch | obj->tiling_mode)); intel_ring_emit(ring, (obj->gtt_offset)); intel_ring_emit(ring, (MI_NOOP)); intel_ring_advance(ring); out: return ret; } static int intel_default_queue_flip(struct drm_device *dev, struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_i915_gem_object *obj) { return -ENODEV; } static int intel_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_framebuffer *old_fb = crtc->fb; struct drm_i915_gem_object *obj = to_intel_framebuffer(fb)->obj; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_unpin_work *work; unsigned long flags; int ret; work = kzalloc(sizeof *work, GFP_KERNEL); if (work == NULL) return -ENOMEM; work->event = event; work->dev = crtc->dev; work->old_fb_obj = to_intel_framebuffer(old_fb)->obj; INIT_WORK(&work->work, intel_unpin_work_fn); ret = drm_vblank_get(dev, intel_crtc->pipe); if (ret) goto free_work; /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); drm_vblank_put(dev, intel_crtc->pipe); DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); return -EBUSY; } intel_crtc->unpin_work = work; spin_unlock_irqrestore(&dev->event_lock, flags); mutex_lock(&dev->struct_mutex); /* Reference the objects for the scheduled work. */ drm_gem_object_reference(&work->old_fb_obj->base); drm_gem_object_reference(&obj->base); crtc->fb = fb; work->pending_flip_obj = obj; work->enable_stall_check = true; /* Block clients from rendering to the new back buffer until * the flip occurs and the object is no longer visible. */ atomic_add(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); ret = dev_priv->display.queue_flip(dev, crtc, fb, obj); if (ret) goto cleanup_pending; mutex_unlock(&dev->struct_mutex); trace_i915_flip_request(intel_crtc->plane, obj); return 0; cleanup_pending: atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); crtc->fb = old_fb; drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); spin_lock_irqsave(&dev->event_lock, flags); intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); drm_vblank_put(dev, intel_crtc->pipe); free_work: kfree(work); return ret; } static void intel_sanitize_modesetting(struct drm_device *dev, int pipe, int plane) { struct drm_i915_private *dev_priv = dev->dev_private; u32 reg, val; int i; /* Clear any frame start delays used for debugging left by the BIOS */ for_each_pipe(i) { reg = PIPECONF(i); I915_WRITE(reg, I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK); } if (HAS_PCH_SPLIT(dev)) return; /* Who knows what state these registers were left in by the BIOS or * grub? * * If we leave the registers in a conflicting state (e.g. with the * display plane reading from the other pipe than the one we intend * to use) then when we attempt to teardown the active mode, we will * not disable the pipes and planes in the correct order -- leaving * a plane reading from a disabled pipe and possibly leading to * undefined behaviour. */ reg = DSPCNTR(plane); val = I915_READ(reg); if ((val & DISPLAY_PLANE_ENABLE) == 0) return; if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) return; /* This display plane is active and attached to the other CPU pipe. */ pipe = !pipe; /* Disable the plane and wait for it to stop reading from the pipe. */ intel_disable_plane(dev_priv, plane, pipe); intel_disable_pipe(dev_priv, pipe); } static void intel_crtc_reset(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); /* Reset flags back to the 'unknown' status so that they * will be correctly set on the initial modeset. */ intel_crtc->dpms_mode = -1; /* We need to fix up any BIOS configuration that conflicts with * our expectations. */ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } static struct drm_crtc_helper_funcs intel_helper_funcs = { .dpms = intel_crtc_dpms, .mode_fixup = intel_crtc_mode_fixup, .mode_set = intel_crtc_mode_set, .mode_set_base = intel_pipe_set_base, .mode_set_base_atomic = intel_pipe_set_base_atomic, .load_lut = intel_crtc_load_lut, .disable = intel_crtc_disable, }; static const struct drm_crtc_funcs intel_crtc_funcs = { .reset = intel_crtc_reset, .cursor_set = intel_crtc_cursor_set, .cursor_move = intel_crtc_cursor_move, .gamma_set = intel_crtc_gamma_set, .set_config = drm_crtc_helper_set_config, .destroy = intel_crtc_destroy, .page_flip = intel_crtc_page_flip, }; static void intel_crtc_init(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc; int i; intel_crtc = kzalloc(sizeof(struct intel_crtc) + (INTELFB_CONN_LIMIT * sizeof(struct drm_connector *)), GFP_KERNEL); if (intel_crtc == NULL) return; drm_crtc_init(dev, &intel_crtc->base, &intel_crtc_funcs); drm_mode_crtc_set_gamma_size(&intel_crtc->base, 256); for (i = 0; i < 256; i++) { intel_crtc->lut_r[i] = i; intel_crtc->lut_g[i] = i; intel_crtc->lut_b[i] = i; } /* Swap pipes & planes for FBC on pre-965 */ intel_crtc->pipe = pipe; intel_crtc->plane = pipe; if (IS_MOBILE(dev) && IS_GEN3(dev)) { DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); intel_crtc->plane = !pipe; } BUG_ON(pipe >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) || dev_priv->plane_to_crtc_mapping[intel_crtc->plane] != NULL); dev_priv->plane_to_crtc_mapping[intel_crtc->plane] = &intel_crtc->base; dev_priv->pipe_to_crtc_mapping[intel_crtc->pipe] = &intel_crtc->base; intel_crtc_reset(&intel_crtc->base); intel_crtc->active = true; /* force the pipe off on setup_init_config */ if (HAS_PCH_SPLIT(dev)) { intel_helper_funcs.prepare = ironlake_crtc_prepare; intel_helper_funcs.commit = ironlake_crtc_commit; } else { intel_helper_funcs.prepare = i9xx_crtc_prepare; intel_helper_funcs.commit = i9xx_crtc_commit; } drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs); intel_crtc->busy = false; setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, struct drm_file *file) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data; struct drm_mode_object *drmmode_obj; struct intel_crtc *crtc; if (!dev_priv) { DRM_ERROR("called with no initialization\n"); return -EINVAL; } drmmode_obj = drm_mode_object_find(dev, pipe_from_crtc_id->crtc_id, DRM_MODE_OBJECT_CRTC); if (!drmmode_obj) { DRM_ERROR("no such CRTC id\n"); return -EINVAL; } crtc = to_intel_crtc(obj_to_crtc(drmmode_obj)); pipe_from_crtc_id->pipe = crtc->pipe; return 0; } static int intel_encoder_clones(struct drm_device *dev, int type_mask) { struct intel_encoder *encoder; int index_mask = 0; int entry = 0; list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { if (type_mask & encoder->clone_mask) index_mask |= (1 << entry); entry++; } return index_mask; } static bool has_edp_a(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (!IS_MOBILE(dev)) return false; if ((I915_READ(DP_A) & DP_DETECTED) == 0) return false; if (IS_GEN5(dev) && (I915_READ(ILK_DISPLAY_CHICKEN_FUSES) & ILK_eDP_A_DISABLE)) return false; return true; } static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; bool dpd_is_edp = false; bool has_lvds = false; if (IS_MOBILE(dev) && !IS_I830(dev)) has_lvds = intel_lvds_init(dev); if (!has_lvds && !HAS_PCH_SPLIT(dev)) { /* disable the panel fitter on everything but LVDS */ I915_WRITE(PFIT_CONTROL, 0); } if (HAS_PCH_SPLIT(dev)) { dpd_is_edp = intel_dpd_is_edp(dev); if (has_edp_a(dev)) intel_dp_init(dev, DP_A); if (dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_D); } intel_crt_init(dev); if (HAS_PCH_SPLIT(dev)) { int found; if (I915_READ(HDMIB) & PORT_DETECTED) { /* PCH SDVOB multiplex with HDMIB */ found = intel_sdvo_init(dev, PCH_SDVOB); if (!found) intel_hdmi_init(dev, HDMIB); if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_B); } if (I915_READ(HDMIC) & PORT_DETECTED) intel_hdmi_init(dev, HDMIC); if (I915_READ(HDMID) & PORT_DETECTED) intel_hdmi_init(dev, HDMID); if (I915_READ(PCH_DP_C) & DP_DETECTED) intel_dp_init(dev, PCH_DP_C); if (!dpd_is_edp && (I915_READ(PCH_DP_D) & DP_DETECTED)) intel_dp_init(dev, PCH_DP_D); } else if (SUPPORTS_DIGITAL_OUTPUTS(dev)) { bool found = false; if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOB\n"); found = intel_sdvo_init(dev, SDVOB); if (!found && SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOB\n"); intel_hdmi_init(dev, SDVOB); } if (!found && SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_B\n"); intel_dp_init(dev, DP_B); } } /* Before G4X SDVOC doesn't have its own detect register */ if (I915_READ(SDVOB) & SDVO_DETECTED) { DRM_DEBUG_KMS("probing SDVOC\n"); found = intel_sdvo_init(dev, SDVOC); } if (!found && (I915_READ(SDVOC) & SDVO_DETECTED)) { if (SUPPORTS_INTEGRATED_HDMI(dev)) { DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, SDVOC); } if (SUPPORTS_INTEGRATED_DP(dev)) { DRM_DEBUG_KMS("probing DP_C\n"); intel_dp_init(dev, DP_C); } } if (SUPPORTS_INTEGRATED_DP(dev) && (I915_READ(DP_D) & DP_DETECTED)) { DRM_DEBUG_KMS("probing DP_D\n"); intel_dp_init(dev, DP_D); } } else if (IS_GEN2(dev)) intel_dvo_init(dev); if (SUPPORTS_TV(dev)) intel_tv_init(dev); list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { encoder->base.possible_crtcs = encoder->crtc_mask; encoder->base.possible_clones = intel_encoder_clones(dev, encoder->clone_mask); } intel_panel_setup_backlight(dev); /* disable all the possible outputs/crtcs before entering KMS mode */ drm_helper_disable_unused_functions(dev); } static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb) { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); drm_framebuffer_cleanup(fb); drm_gem_object_unreference_unlocked(&intel_fb->obj->base); kfree(intel_fb); } static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, struct drm_file *file, unsigned int *handle) { struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; return drm_gem_handle_create(file, &obj->base, handle); } static const struct drm_framebuffer_funcs intel_fb_funcs = { .destroy = intel_user_framebuffer_destroy, .create_handle = intel_user_framebuffer_create_handle, }; int intel_framebuffer_init(struct drm_device *dev, struct intel_framebuffer *intel_fb, struct drm_mode_fb_cmd *mode_cmd, struct drm_i915_gem_object *obj) { int ret; if (obj->tiling_mode == I915_TILING_Y) return -EINVAL; if (mode_cmd->pitch & 63) return -EINVAL; switch (mode_cmd->bpp) { case 8: case 16: case 24: case 32: break; default: return -EINVAL; } ret = drm_framebuffer_init(dev, &intel_fb->base, &intel_fb_funcs); if (ret) { DRM_ERROR("framebuffer init failed %d\n", ret); return ret; } drm_helper_mode_fill_fb_struct(&intel_fb->base, mode_cmd); intel_fb->obj = obj; return 0; } static struct drm_framebuffer * intel_user_framebuffer_create(struct drm_device *dev, struct drm_file *filp, struct drm_mode_fb_cmd *mode_cmd) { struct drm_i915_gem_object *obj; obj = to_intel_bo(drm_gem_object_lookup(dev, filp, mode_cmd->handle)); if (&obj->base == NULL) return ERR_PTR(-ENOENT); return intel_framebuffer_create(dev, mode_cmd, obj); } static const struct drm_mode_config_funcs intel_mode_funcs = { .fb_create = intel_user_framebuffer_create, .output_poll_changed = intel_fb_output_poll_changed, }; static struct drm_i915_gem_object * intel_alloc_context_page(struct drm_device *dev) { struct drm_i915_gem_object *ctx; int ret; WARN_ON(!mutex_is_locked(&dev->struct_mutex)); ctx = i915_gem_alloc_object(dev, 4096); if (!ctx) { DRM_DEBUG("failed to alloc power context, RC6 disabled\n"); return NULL; } ret = i915_gem_object_pin(ctx, 4096, true); if (ret) { DRM_ERROR("failed to pin power context: %d\n", ret); goto err_unref; } ret = i915_gem_object_set_to_gtt_domain(ctx, 1); if (ret) { DRM_ERROR("failed to set-domain on power context: %d\n", ret); goto err_unpin; } return ctx; err_unpin: i915_gem_object_unpin(ctx); err_unref: drm_gem_object_unreference(&ctx->base); mutex_unlock(&dev->struct_mutex); return NULL; } bool ironlake_set_drps(struct drm_device *dev, u8 val) { struct drm_i915_private *dev_priv = dev->dev_private; u16 rgvswctl; rgvswctl = I915_READ16(MEMSWCTL); if (rgvswctl & MEMCTL_CMD_STS) { DRM_DEBUG("gpu busy, RCS change rejected\n"); return false; /* still busy with another command */ } rgvswctl = (MEMCTL_CMD_CHFREQ << MEMCTL_CMD_SHIFT) | (val << MEMCTL_FREQ_SHIFT) | MEMCTL_SFCAVM; I915_WRITE16(MEMSWCTL, rgvswctl); POSTING_READ16(MEMSWCTL); rgvswctl |= MEMCTL_CMD_STS; I915_WRITE16(MEMSWCTL, rgvswctl); return true; } void ironlake_enable_drps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 rgvmodectl = I915_READ(MEMMODECTL); u8 fmax, fmin, fstart, vstart; /* Enable temp reporting */ I915_WRITE16(PMMISC, I915_READ(PMMISC) | MCPPCE_EN); I915_WRITE16(TSC1, I915_READ(TSC1) | TSE); /* 100ms RC evaluation intervals */ I915_WRITE(RCUPEI, 100000); I915_WRITE(RCDNEI, 100000); /* Set max/min thresholds to 90ms and 80ms respectively */ I915_WRITE(RCBMAXAVG, 90000); I915_WRITE(RCBMINAVG, 80000); I915_WRITE(MEMIHYST, 1); /* Set up min, max, and cur for interrupt handling */ fmax = (rgvmodectl & MEMMODE_FMAX_MASK) >> MEMMODE_FMAX_SHIFT; fmin = (rgvmodectl & MEMMODE_FMIN_MASK); fstart = (rgvmodectl & MEMMODE_FSTART_MASK) >> MEMMODE_FSTART_SHIFT; vstart = (I915_READ(PXVFREQ_BASE + (fstart * 4)) & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT; dev_priv->fmax = fmax; /* IPS callback will increase this */ dev_priv->fstart = fstart; dev_priv->max_delay = fstart; dev_priv->min_delay = fmin; dev_priv->cur_delay = fstart; DRM_DEBUG_DRIVER("fmax: %d, fmin: %d, fstart: %d\n", fmax, fmin, fstart); I915_WRITE(MEMINTREN, MEMINT_CX_SUPR_EN | MEMINT_EVAL_CHG_EN); /* * Interrupts will be enabled in ironlake_irq_postinstall */ I915_WRITE(VIDSTART, vstart); POSTING_READ(VIDSTART); rgvmodectl |= MEMMODE_SWMODE_EN; I915_WRITE(MEMMODECTL, rgvmodectl); if (wait_for((I915_READ(MEMSWCTL) & MEMCTL_CMD_STS) == 0, 10)) DRM_ERROR("stuck trying to change perf mode\n"); msleep(1); ironlake_set_drps(dev, fstart); dev_priv->last_count1 = I915_READ(0x112e4) + I915_READ(0x112e8) + I915_READ(0x112e0); dev_priv->last_time1 = jiffies_to_msecs(jiffies); dev_priv->last_count2 = I915_READ(0x112f4); getrawmonotonic(&dev_priv->last_time2); } void ironlake_disable_drps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u16 rgvswctl = I915_READ16(MEMSWCTL); /* Ack interrupts, disable EFC interrupt */ I915_WRITE(MEMINTREN, I915_READ(MEMINTREN) & ~MEMINT_EVAL_CHG_EN); I915_WRITE(MEMINTRSTS, MEMINT_EVAL_CHG); I915_WRITE(DEIER, I915_READ(DEIER) & ~DE_PCU_EVENT); I915_WRITE(DEIIR, DE_PCU_EVENT); I915_WRITE(DEIMR, I915_READ(DEIMR) | DE_PCU_EVENT); /* Go back to the starting frequency */ ironlake_set_drps(dev, dev_priv->fstart); msleep(1); rgvswctl |= MEMCTL_CMD_STS; I915_WRITE(MEMSWCTL, rgvswctl); msleep(1); } void gen6_set_rps(struct drm_device *dev, u8 val) { struct drm_i915_private *dev_priv = dev->dev_private; u32 swreq; swreq = (val & 0x3ff) << 25; I915_WRITE(GEN6_RPNSWREQ, swreq); } void gen6_disable_rps(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(GEN6_RPNSWREQ, 1 << 31); I915_WRITE(GEN6_PMINTRMSK, 0xffffffff); I915_WRITE(GEN6_PMIER, 0); spin_lock_irq(&dev_priv->rps_lock); dev_priv->pm_iir = 0; spin_unlock_irq(&dev_priv->rps_lock); I915_WRITE(GEN6_PMIIR, I915_READ(GEN6_PMIIR)); } static unsigned long intel_pxfreq(u32 vidfreq) { unsigned long freq; int div = (vidfreq & 0x3f0000) >> 16; int post = (vidfreq & 0x3000) >> 12; int pre = (vidfreq & 0x7); if (!pre) return 0; freq = ((div * 133333) / ((1<dev_private; u32 lcfuse; u8 pxw[16]; int i; /* Disable to program */ I915_WRITE(ECR, 0); POSTING_READ(ECR); /* Program energy weights for various events */ I915_WRITE(SDEW, 0x15040d00); I915_WRITE(CSIEW0, 0x007f0000); I915_WRITE(CSIEW1, 0x1e220004); I915_WRITE(CSIEW2, 0x04000004); for (i = 0; i < 5; i++) I915_WRITE(PEW + (i * 4), 0); for (i = 0; i < 3; i++) I915_WRITE(DEW + (i * 4), 0); /* Program P-state weights to account for frequency power adjustment */ for (i = 0; i < 16; i++) { u32 pxvidfreq = I915_READ(PXVFREQ_BASE + (i * 4)); unsigned long freq = intel_pxfreq(pxvidfreq); unsigned long vid = (pxvidfreq & PXVFREQ_PX_MASK) >> PXVFREQ_PX_SHIFT; unsigned long val; val = vid * vid; val *= (freq / 1000); val *= 255; val /= (127*127*900); if (val > 0xff) DRM_ERROR("bad pxval: %ld\n", val); pxw[i] = val; } /* Render standby states get 0 weight */ pxw[14] = 0; pxw[15] = 0; for (i = 0; i < 4; i++) { u32 val = (pxw[i*4] << 24) | (pxw[(i*4)+1] << 16) | (pxw[(i*4)+2] << 8) | (pxw[(i*4)+3]); I915_WRITE(PXW + (i * 4), val); } /* Adjust magic regs to magic values (more experimental results) */ I915_WRITE(OGW0, 0); I915_WRITE(OGW1, 0); I915_WRITE(EG0, 0x00007f00); I915_WRITE(EG1, 0x0000000e); I915_WRITE(EG2, 0x000e0000); I915_WRITE(EG3, 0x68000300); I915_WRITE(EG4, 0x42000000); I915_WRITE(EG5, 0x00140031); I915_WRITE(EG6, 0); I915_WRITE(EG7, 0); for (i = 0; i < 8; i++) I915_WRITE(PXWL + (i * 4), 0); /* Enable PMON + select events */ I915_WRITE(ECR, 0x80000019); lcfuse = I915_READ(LCFUSE02); dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } void gen6_enable_rps(struct drm_i915_private *dev_priv) { u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS); u32 pcu_mbox, rc6_mask = 0; int cur_freq, min_freq, max_freq; int i; /* Here begins a magic sequence of register writes to enable * auto-downclocking. * * Perhaps there might be some value in exposing these to * userspace... */ I915_WRITE(GEN6_RC_STATE, 0); mutex_lock(&dev_priv->dev->struct_mutex); gen6_gt_force_wake_get(dev_priv); /* disable the counters and set deterministic thresholds */ I915_WRITE(GEN6_RC_CONTROL, 0); I915_WRITE(GEN6_RC1_WAKE_RATE_LIMIT, 1000 << 16); I915_WRITE(GEN6_RC6_WAKE_RATE_LIMIT, 40 << 16 | 30); I915_WRITE(GEN6_RC6pp_WAKE_RATE_LIMIT, 30); I915_WRITE(GEN6_RC_EVALUATION_INTERVAL, 125000); I915_WRITE(GEN6_RC_IDLE_HYSTERSIS, 25); for (i = 0; i < I915_NUM_RINGS; i++) I915_WRITE(RING_MAX_IDLE(dev_priv->ring[i].mmio_base), 10); I915_WRITE(GEN6_RC_SLEEP, 0); I915_WRITE(GEN6_RC1e_THRESHOLD, 1000); I915_WRITE(GEN6_RC6_THRESHOLD, 50000); I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ if (i915_enable_rc6) rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | GEN6_RC_CTL_RC6_ENABLE; I915_WRITE(GEN6_RC_CONTROL, rc6_mask | GEN6_RC_CTL_EI_MODE(1) | GEN6_RC_CTL_HW_ENABLE); I915_WRITE(GEN6_RPNSWREQ, GEN6_FREQUENCY(10) | GEN6_OFFSET(0) | GEN6_AGGRESSIVE_TURBO); I915_WRITE(GEN6_RC_VIDEO_FREQ, GEN6_FREQUENCY(12)); I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000); I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, 18 << 24 | 6 << 16); I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000); I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000); I915_WRITE(GEN6_RP_UP_EI, 100000); I915_WRITE(GEN6_RP_DOWN_EI, 5000000); I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); I915_WRITE(GEN6_RP_CONTROL, GEN6_RP_MEDIA_TURBO | GEN6_RP_USE_NORMAL_FREQ | GEN6_RP_MEDIA_IS_GFX | GEN6_RP_ENABLE | GEN6_RP_UP_BUSY_AVG | GEN6_RP_DOWN_IDLE_CONT); if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, 500)) DRM_ERROR("timeout waiting for pcode mailbox to become idle\n"); I915_WRITE(GEN6_PCODE_DATA, 0); I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | GEN6_PCODE_WRITE_MIN_FREQ_TABLE); if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, 500)) DRM_ERROR("timeout waiting for pcode mailbox to finish\n"); min_freq = (rp_state_cap & 0xff0000) >> 16; max_freq = rp_state_cap & 0xff; cur_freq = (gt_perf_status & 0xff00) >> 8; /* Check for overclock support */ if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, 500)) DRM_ERROR("timeout waiting for pcode mailbox to become idle\n"); I915_WRITE(GEN6_PCODE_MAILBOX, GEN6_READ_OC_PARAMS); pcu_mbox = I915_READ(GEN6_PCODE_DATA); if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, 500)) DRM_ERROR("timeout waiting for pcode mailbox to finish\n"); if (pcu_mbox & (1<<31)) { /* OC supported */ max_freq = pcu_mbox & 0xff; DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50); } /* In units of 100MHz */ dev_priv->max_delay = max_freq; dev_priv->min_delay = min_freq; dev_priv->cur_delay = cur_freq; /* requires MSI enabled */ I915_WRITE(GEN6_PMIER, GEN6_PM_MBOX_EVENT | GEN6_PM_THERMAL_EVENT | GEN6_PM_RP_DOWN_TIMEOUT | GEN6_PM_RP_UP_THRESHOLD | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_DOWN_EI_EXPIRED); spin_lock_irq(&dev_priv->rps_lock); WARN_ON(dev_priv->pm_iir != 0); I915_WRITE(GEN6_PMIMR, 0); spin_unlock_irq(&dev_priv->rps_lock); /* enable all PM interrupts */ I915_WRITE(GEN6_PMINTRMSK, 0); gen6_gt_force_wake_put(dev_priv); mutex_unlock(&dev_priv->dev->struct_mutex); } static void ironlake_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; /* Required for FBC */ dspclk_gate |= DPFCUNIT_CLOCK_GATE_DISABLE | DPFCRUNIT_CLOCK_GATE_DISABLE | DPFDUNIT_CLOCK_GATE_DISABLE; /* Required for CxSR */ dspclk_gate |= DPARBUNIT_CLOCK_GATE_DISABLE; I915_WRITE(PCH_3DCGDIS0, MARIUNIT_CLOCK_GATE_DISABLE | SVSMUNIT_CLOCK_GATE_DISABLE); I915_WRITE(PCH_3DCGDIS1, VFMUNIT_CLOCK_GATE_DISABLE); I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); /* * According to the spec the following bits should be set in * order to enable memory self-refresh * The bit 22/21 of 0x42004 * The bit 5 of 0x42020 * The bit 15 of 0x45000 */ I915_WRITE(ILK_DISPLAY_CHICKEN2, (I915_READ(ILK_DISPLAY_CHICKEN2) | ILK_DPARB_GATE | ILK_VSDPFD_FULL)); I915_WRITE(ILK_DSPCLK_GATE, (I915_READ(ILK_DSPCLK_GATE) | ILK_DPARB_CLK_GATE)); I915_WRITE(DISP_ARB_CTL, (I915_READ(DISP_ARB_CTL) | DISP_FBC_WM_DIS)); I915_WRITE(WM3_LP_ILK, 0); I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); /* * Based on the document from hardware guys the following bits * should be set unconditionally in order to enable FBC. * The bit 22 of 0x42000 * The bit 22 of 0x42004 * The bit 7,8,9 of 0x42020. */ if (IS_IRONLAKE_M(dev)) { I915_WRITE(ILK_DISPLAY_CHICKEN1, I915_READ(ILK_DISPLAY_CHICKEN1) | ILK_FBCQ_DIS); I915_WRITE(ILK_DISPLAY_CHICKEN2, I915_READ(ILK_DISPLAY_CHICKEN2) | ILK_DPARB_GATE); I915_WRITE(ILK_DSPCLK_GATE, I915_READ(ILK_DSPCLK_GATE) | ILK_DPFC_DIS1 | ILK_DPFC_DIS2 | ILK_CLK_FBC); } I915_WRITE(ILK_DISPLAY_CHICKEN2, I915_READ(ILK_DISPLAY_CHICKEN2) | ILK_ELPIN_409_SELECT); I915_WRITE(_3D_CHICKEN2, _3D_CHICKEN2_WM_READ_PIPELINED << 16 | _3D_CHICKEN2_WM_READ_PIPELINED); } static void gen6_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int pipe; uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); I915_WRITE(ILK_DISPLAY_CHICKEN2, I915_READ(ILK_DISPLAY_CHICKEN2) | ILK_ELPIN_409_SELECT); /* WaDisableHiZPlanesWhenMSAAEnabled */ I915_WRITE(_3D_CHICKEN, _MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB)); I915_WRITE(WM3_LP_ILK, 0); I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); /* According to the BSpec vol1g, bit 12 (RCPBUNIT) clock * gating disable must be set. Failure to set it results in * flickering pixels due to Z write ordering failures after * some amount of runtime in the Mesa "fire" demo, and Unigine * Sanctuary and Tropics, and apparently anything else with * alpha test or pixel discard. * * According to the spec, bit 11 (RCCUNIT) must also be set, * but we didn't debug actual testcases to find it out. */ I915_WRITE(GEN6_UCGCTL2, GEN6_RCPBUNIT_CLOCK_GATE_DISABLE | GEN6_RCCUNIT_CLOCK_GATE_DISABLE); /* * According to the spec the following bits should be * set in order to enable memory self-refresh and fbc: * The bit21 and bit22 of 0x42000 * The bit21 and bit22 of 0x42004 * The bit5 and bit7 of 0x42020 * The bit14 of 0x70180 * The bit14 of 0x71180 */ I915_WRITE(ILK_DISPLAY_CHICKEN1, I915_READ(ILK_DISPLAY_CHICKEN1) | ILK_FBCQ_DIS | ILK_PABSTRETCH_DIS); I915_WRITE(ILK_DISPLAY_CHICKEN2, I915_READ(ILK_DISPLAY_CHICKEN2) | ILK_DPARB_GATE | ILK_VSDPFD_FULL); I915_WRITE(ILK_DSPCLK_GATE, I915_READ(ILK_DSPCLK_GATE) | ILK_DPARB_CLK_GATE | ILK_DPFD_CLK_GATE); for_each_pipe(pipe) I915_WRITE(DSPCNTR(pipe), I915_READ(DSPCNTR(pipe)) | DISPPLANE_TRICKLE_FEED_DISABLE); } static void gen7_setup_fixed_func_scheduler(struct drm_i915_private *dev_priv) { uint32_t reg = I915_READ(GEN7_FF_THREAD_MODE); reg &= ~GEN7_FF_SCHED_MASK; reg |= GEN7_FF_TS_SCHED_HW; reg |= GEN7_FF_VS_SCHED_HW; reg |= GEN7_FF_DS_SCHED_HW; I915_WRITE(GEN7_FF_THREAD_MODE, reg); } static void ivybridge_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int pipe; uint32_t dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE; I915_WRITE(PCH_DSPCLK_GATE_D, dspclk_gate); I915_WRITE(WM3_LP_ILK, 0); I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); /* According to the spec, bit 13 (RCZUNIT) must be set on IVB. * This implements the WaDisableRCZUnitClockGating workaround. */ I915_WRITE(GEN6_UCGCTL2, GEN6_RCZUNIT_CLOCK_GATE_DISABLE); I915_WRITE(ILK_DSPCLK_GATE, IVB_VRHUNIT_CLK_GATE); /* Apply the WaDisableRHWOOptimizationForRenderHang workaround. */ I915_WRITE(GEN7_COMMON_SLICE_CHICKEN1, GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC); /* WaApplyL3ControlAndL3ChickenMode requires those two on Ivy Bridge */ I915_WRITE(GEN7_L3CNTLREG1, GEN7_WA_FOR_GEN7_L3_CONTROL); I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); /* This is required by WaCatErrorRejectionIssue */ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB); for_each_pipe(pipe) I915_WRITE(DSPCNTR(pipe), I915_READ(DSPCNTR(pipe)) | DISPPLANE_TRICKLE_FEED_DISABLE); } static void g4x_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; uint32_t dspclk_gate; I915_WRITE(RENCLK_GATE_D1, 0); I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE | GS_UNIT_CLOCK_GATE_DISABLE | CL_UNIT_CLOCK_GATE_DISABLE); I915_WRITE(RAMCLK_GATE_D, 0); dspclk_gate = VRHUNIT_CLOCK_GATE_DISABLE | OVRUNIT_CLOCK_GATE_DISABLE | OVCUNIT_CLOCK_GATE_DISABLE; if (IS_GM45(dev)) dspclk_gate |= DSSUNIT_CLOCK_GATE_DISABLE; I915_WRITE(DSPCLK_GATE_D, dspclk_gate); } static void crestline_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(RENCLK_GATE_D1, I965_RCC_CLOCK_GATE_DISABLE); I915_WRITE(RENCLK_GATE_D2, 0); I915_WRITE(DSPCLK_GATE_D, 0); I915_WRITE(RAMCLK_GATE_D, 0); I915_WRITE16(DEUC, 0); } static void broadwater_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(RENCLK_GATE_D1, I965_RCZ_CLOCK_GATE_DISABLE | I965_RCC_CLOCK_GATE_DISABLE | I965_RCPB_CLOCK_GATE_DISABLE | I965_ISC_CLOCK_GATE_DISABLE | I965_FBC_CLOCK_GATE_DISABLE); I915_WRITE(RENCLK_GATE_D2, 0); } static void gen3_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 dstate = I915_READ(D_STATE); dstate |= DSTATE_PLL_D3_OFF | DSTATE_GFX_CLOCK_GATING | DSTATE_DOT_CLOCK_GATING; I915_WRITE(D_STATE, dstate); } static void i85x_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(RENCLK_GATE_D1, SV_CLOCK_GATE_DISABLE); } static void i830_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; I915_WRITE(DSPCLK_GATE_D, OVRUNIT_CLOCK_GATE_DISABLE); } static void ibx_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* * On Ibex Peak and Cougar Point, we need to disable clock * gating for the panel power sequencer or it will fail to * start up when no ports are active. */ I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); } static void cpt_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int pipe; /* * On Ibex Peak and Cougar Point, we need to disable clock * gating for the panel power sequencer or it will fail to * start up when no ports are active. */ I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) | DPLS_EDP_PPS_FIX_DIS); /* Without this, mode sets may fail silently on FDI */ for_each_pipe(pipe) I915_WRITE(TRANS_CHICKEN2(pipe), TRANS_AUTOTRAIN_GEN_STALL_DIS); } static void ironlake_teardown_rc6(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (dev_priv->renderctx) { i915_gem_object_unpin(dev_priv->renderctx); drm_gem_object_unreference(&dev_priv->renderctx->base); dev_priv->renderctx = NULL; } if (dev_priv->pwrctx) { i915_gem_object_unpin(dev_priv->pwrctx); drm_gem_object_unreference(&dev_priv->pwrctx->base); dev_priv->pwrctx = NULL; } gen7_setup_fixed_func_scheduler(dev_priv); } static void ironlake_disable_rc6(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (I915_READ(PWRCTXA)) { /* Wake the GPU, prevent RC6, then restore RSTDBYCTL */ I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) | RCX_SW_EXIT); wait_for(((I915_READ(RSTDBYCTL) & RSX_STATUS_MASK) == RSX_STATUS_ON), 50); I915_WRITE(PWRCTXA, 0); POSTING_READ(PWRCTXA); I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT); POSTING_READ(RSTDBYCTL); } ironlake_teardown_rc6(dev); } static int ironlake_setup_rc6(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (dev_priv->renderctx == NULL) dev_priv->renderctx = intel_alloc_context_page(dev); if (!dev_priv->renderctx) return -ENOMEM; if (dev_priv->pwrctx == NULL) dev_priv->pwrctx = intel_alloc_context_page(dev); if (!dev_priv->pwrctx) { ironlake_teardown_rc6(dev); return -ENOMEM; } return 0; } void ironlake_enable_rc6(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int ret; /* rc6 disabled by default due to repeated reports of hanging during * boot and resume. */ if (!i915_enable_rc6) return; mutex_lock(&dev->struct_mutex); ret = ironlake_setup_rc6(dev); if (ret) { mutex_unlock(&dev->struct_mutex); return; } /* * GPU can automatically power down the render unit if given a page * to save state. */ ret = BEGIN_LP_RING(6); if (ret) { ironlake_teardown_rc6(dev); mutex_unlock(&dev->struct_mutex); return; } OUT_RING(MI_SUSPEND_FLUSH | MI_SUSPEND_FLUSH_EN); OUT_RING(MI_SET_CONTEXT); OUT_RING(dev_priv->renderctx->gtt_offset | MI_MM_SPACE_GTT | MI_SAVE_EXT_STATE_EN | MI_RESTORE_EXT_STATE_EN | MI_RESTORE_INHIBIT); OUT_RING(MI_SUSPEND_FLUSH); OUT_RING(MI_NOOP); OUT_RING(MI_FLUSH); ADVANCE_LP_RING(); /* * Wait for the command parser to advance past MI_SET_CONTEXT. The HW * does an implicit flush, combined with MI_FLUSH above, it should be * safe to assume that renderctx is valid */ ret = intel_wait_ring_idle(LP_RING(dev_priv)); if (ret) { DRM_ERROR("failed to enable ironlake power power savings\n"); ironlake_teardown_rc6(dev); mutex_unlock(&dev->struct_mutex); return; } I915_WRITE(PWRCTXA, dev_priv->pwrctx->gtt_offset | PWRCTX_EN); I915_WRITE(RSTDBYCTL, I915_READ(RSTDBYCTL) & ~RCX_SW_EXIT); mutex_unlock(&dev->struct_mutex); } void intel_init_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->display.init_clock_gating(dev); if (dev_priv->display.init_pch_clock_gating) dev_priv->display.init_pch_clock_gating(dev); } /* Set up chip specific display functions */ static void intel_init_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* We always want a DPMS function */ if (HAS_PCH_SPLIT(dev)) { dev_priv->display.dpms = ironlake_crtc_dpms; dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set; } else { dev_priv->display.dpms = i9xx_crtc_dpms; dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; } if (I915_HAS_FBC(dev)) { if (HAS_PCH_SPLIT(dev)) { dev_priv->display.fbc_enabled = ironlake_fbc_enabled; dev_priv->display.enable_fbc = ironlake_enable_fbc; dev_priv->display.disable_fbc = ironlake_disable_fbc; } else if (IS_GM45(dev)) { dev_priv->display.fbc_enabled = g4x_fbc_enabled; dev_priv->display.enable_fbc = g4x_enable_fbc; dev_priv->display.disable_fbc = g4x_disable_fbc; } else if (IS_CRESTLINE(dev)) { dev_priv->display.fbc_enabled = i8xx_fbc_enabled; dev_priv->display.enable_fbc = i8xx_enable_fbc; dev_priv->display.disable_fbc = i8xx_disable_fbc; } /* 855GM needs testing */ } /* Returns the core display clock speed */ if (IS_I945G(dev) || (IS_G33(dev) && ! IS_PINEVIEW_M(dev))) dev_priv->display.get_display_clock_speed = i945_get_display_clock_speed; else if (IS_I915G(dev)) dev_priv->display.get_display_clock_speed = i915_get_display_clock_speed; else if (IS_I945GM(dev) || IS_845G(dev) || IS_PINEVIEW_M(dev)) dev_priv->display.get_display_clock_speed = i9xx_misc_get_display_clock_speed; else if (IS_I915GM(dev)) dev_priv->display.get_display_clock_speed = i915gm_get_display_clock_speed; else if (IS_I865G(dev)) dev_priv->display.get_display_clock_speed = i865_get_display_clock_speed; else if (IS_I85X(dev)) dev_priv->display.get_display_clock_speed = i855_get_display_clock_speed; else /* 852, 830 */ dev_priv->display.get_display_clock_speed = i830_get_display_clock_speed; /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { if (HAS_PCH_IBX(dev)) dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating; else if (HAS_PCH_CPT(dev)) dev_priv->display.init_pch_clock_gating = cpt_init_clock_gating; if (IS_GEN5(dev)) { if (I915_READ(MLTR_ILK) & ILK_SRLT_MASK) dev_priv->display.update_wm = ironlake_update_wm; else { DRM_DEBUG_KMS("Failed to get proper latency. " "Disable CxSR\n"); dev_priv->display.update_wm = NULL; } dev_priv->display.fdi_link_train = ironlake_fdi_link_train; dev_priv->display.init_clock_gating = ironlake_init_clock_gating; } else if (IS_GEN6(dev)) { if (SNB_READ_WM0_LATENCY()) { dev_priv->display.update_wm = sandybridge_update_wm; } else { DRM_DEBUG_KMS("Failed to read display plane latency. " "Disable CxSR\n"); dev_priv->display.update_wm = NULL; } dev_priv->display.fdi_link_train = gen6_fdi_link_train; dev_priv->display.init_clock_gating = gen6_init_clock_gating; } else if (IS_IVYBRIDGE(dev)) { /* FIXME: detect B0+ stepping and use auto training */ dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; if (SNB_READ_WM0_LATENCY()) { dev_priv->display.update_wm = sandybridge_update_wm; } else { DRM_DEBUG_KMS("Failed to read display plane latency. " "Disable CxSR\n"); dev_priv->display.update_wm = NULL; } dev_priv->display.init_clock_gating = ivybridge_init_clock_gating; } else dev_priv->display.update_wm = NULL; } else if (IS_PINEVIEW(dev)) { if (!intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, dev_priv->fsb_freq, dev_priv->mem_freq)) { DRM_INFO("failed to find known CxSR latency " "(found ddr%s fsb freq %d, mem freq %d), " "disabling CxSR\n", (dev_priv->is_ddr3 == 1) ? "3": "2", dev_priv->fsb_freq, dev_priv->mem_freq); /* Disable CxSR and never update its watermark again */ pineview_disable_cxsr(dev); dev_priv->display.update_wm = NULL; } else dev_priv->display.update_wm = pineview_update_wm; dev_priv->display.init_clock_gating = gen3_init_clock_gating; } else if (IS_G4X(dev)) { dev_priv->display.update_wm = g4x_update_wm; dev_priv->display.init_clock_gating = g4x_init_clock_gating; } else if (IS_GEN4(dev)) { dev_priv->display.update_wm = i965_update_wm; if (IS_CRESTLINE(dev)) dev_priv->display.init_clock_gating = crestline_init_clock_gating; else if (IS_BROADWATER(dev)) dev_priv->display.init_clock_gating = broadwater_init_clock_gating; } else if (IS_GEN3(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i9xx_get_fifo_size; dev_priv->display.init_clock_gating = gen3_init_clock_gating; } else if (IS_I865G(dev)) { dev_priv->display.update_wm = i830_update_wm; dev_priv->display.init_clock_gating = i85x_init_clock_gating; dev_priv->display.get_fifo_size = i830_get_fifo_size; } else if (IS_I85X(dev)) { dev_priv->display.update_wm = i9xx_update_wm; dev_priv->display.get_fifo_size = i85x_get_fifo_size; dev_priv->display.init_clock_gating = i85x_init_clock_gating; } else { dev_priv->display.update_wm = i830_update_wm; dev_priv->display.init_clock_gating = i830_init_clock_gating; if (IS_845G(dev)) dev_priv->display.get_fifo_size = i845_get_fifo_size; else dev_priv->display.get_fifo_size = i830_get_fifo_size; } /* Default just returns -ENODEV to indicate unsupported */ dev_priv->display.queue_flip = intel_default_queue_flip; switch (INTEL_INFO(dev)->gen) { case 2: dev_priv->display.queue_flip = intel_gen2_queue_flip; break; case 3: dev_priv->display.queue_flip = intel_gen3_queue_flip; break; case 4: case 5: dev_priv->display.queue_flip = intel_gen4_queue_flip; break; case 6: dev_priv->display.queue_flip = intel_gen6_queue_flip; break; case 7: dev_priv->display.queue_flip = intel_gen7_queue_flip; break; } } /* * Some BIOSes insist on assuming the GPU's pipe A is enabled at suspend, * resume, or other times. This quirk makes sure that's the case for * affected systems. */ static void quirk_pipea_force (struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_PIPEA_FORCE; DRM_DEBUG_DRIVER("applying pipe a force quirk\n"); } /* * Some machines (Lenovo U160) do not work with SSC on LVDS for some reason */ static void quirk_ssc_force_disable(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->quirks |= QUIRK_LVDS_SSC_DISABLE; } struct intel_quirk { int device; int subsystem_vendor; int subsystem_device; void (*hook)(struct drm_device *dev); }; struct intel_quirk intel_quirks[] = { /* HP Compaq 2730p needs pipe A force quirk (LP: #291555) */ { 0x2a42, 0x103c, 0x30eb, quirk_pipea_force }, /* HP Mini needs pipe A force quirk (LP: #322104) */ { 0x27ae,0x103c, 0x361a, quirk_pipea_force }, /* Thinkpad R31 needs pipe A force quirk */ { 0x3577, 0x1014, 0x0505, quirk_pipea_force }, /* Toshiba Protege R-205, S-209 needs pipe A force quirk */ { 0x2592, 0x1179, 0x0001, quirk_pipea_force }, /* ThinkPad X30 needs pipe A force quirk (LP: #304614) */ { 0x3577, 0x1014, 0x0513, quirk_pipea_force }, /* ThinkPad X40 needs pipe A force quirk */ /* ThinkPad T60 needs pipe A force quirk (bug #16494) */ { 0x2782, 0x17aa, 0x201a, quirk_pipea_force }, /* 855 & before need to leave pipe A & dpll A up */ { 0x3582, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, { 0x2562, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force }, /* Lenovo U160 cannot use SSC on LVDS */ { 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable }, }; static void intel_init_quirks(struct drm_device *dev) { struct pci_dev *d = dev->pdev; int i; for (i = 0; i < ARRAY_SIZE(intel_quirks); i++) { struct intel_quirk *q = &intel_quirks[i]; if (d->device == q->device && (d->subsystem_vendor == q->subsystem_vendor || q->subsystem_vendor == PCI_ANY_ID) && (d->subsystem_device == q->subsystem_device || q->subsystem_device == PCI_ANY_ID)) q->hook(dev); } } /* Disable the VGA plane that we never use */ static void i915_disable_vga(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u8 sr1; u32 vga_reg; if (HAS_PCH_SPLIT(dev)) vga_reg = CPU_VGACNTRL; else vga_reg = VGACNTRL; vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); outb(1, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); I915_WRITE(vga_reg, VGA_DISP_DISABLE); POSTING_READ(vga_reg); } void intel_modeset_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int i; drm_mode_config_init(dev); dev->mode_config.min_width = 0; dev->mode_config.min_height = 0; dev->mode_config.funcs = (void *)&intel_mode_funcs; intel_init_quirks(dev); intel_init_display(dev); if (IS_GEN2(dev)) { dev->mode_config.max_width = 2048; dev->mode_config.max_height = 2048; } else if (IS_GEN3(dev)) { dev->mode_config.max_width = 4096; dev->mode_config.max_height = 4096; } else { dev->mode_config.max_width = 8192; dev->mode_config.max_height = 8192; } dev->mode_config.fb_base = dev->agp->base; DRM_DEBUG_KMS("%d display pipe%s available.\n", dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : ""); for (i = 0; i < dev_priv->num_pipe; i++) { intel_crtc_init(dev, i); } /* Just disable it once at startup */ i915_disable_vga(dev); intel_setup_outputs(dev); intel_init_clock_gating(dev); if (IS_IRONLAKE_M(dev)) { ironlake_enable_drps(dev); intel_init_emon(dev); } if (IS_GEN6(dev) || IS_GEN7(dev)) gen6_enable_rps(dev_priv); INIT_WORK(&dev_priv->idle_work, intel_idle_update); setup_timer(&dev_priv->idle_timer, intel_gpu_idle_timer, (unsigned long)dev); } void intel_modeset_gem_init(struct drm_device *dev) { if (IS_IRONLAKE_M(dev)) ironlake_enable_rc6(dev); intel_setup_overlay(dev); } void intel_modeset_cleanup(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; drm_kms_helper_poll_fini(dev); mutex_lock(&dev->struct_mutex); intel_unregister_dsm_handler(); list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) continue; intel_crtc = to_intel_crtc(crtc); intel_increase_pllclock(crtc); } if (dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); if (IS_IRONLAKE_M(dev)) ironlake_disable_drps(dev); if (IS_GEN6(dev) || IS_GEN7(dev)) gen6_disable_rps(dev); if (IS_IRONLAKE_M(dev)) ironlake_disable_rc6(dev); mutex_unlock(&dev->struct_mutex); /* Disable the irq before mode object teardown, for the irq might * enqueue unpin/hotplug work. */ drm_irq_uninstall(dev); cancel_work_sync(&dev_priv->hotplug_work); /* Shut off idle work before the crtcs get freed. */ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { intel_crtc = to_intel_crtc(crtc); del_timer_sync(&intel_crtc->idle_timer); } del_timer_sync(&dev_priv->idle_timer); cancel_work_sync(&dev_priv->idle_work); drm_mode_config_cleanup(dev); } /* * Return which encoder is currently attached for connector. */ struct drm_encoder *intel_best_encoder(struct drm_connector *connector) { return &intel_attached_encoder(connector)->base; } void intel_connector_attach_encoder(struct intel_connector *connector, struct intel_encoder *encoder) { connector->encoder = encoder; drm_mode_connector_attach_encoder(&connector->base, &encoder->base); } /* * set vga decode state - true == enable VGA decode */ int intel_modeset_vga_set_state(struct drm_device *dev, bool state) { struct drm_i915_private *dev_priv = dev->dev_private; u16 gmch_ctrl; pci_read_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, &gmch_ctrl); if (state) gmch_ctrl &= ~INTEL_GMCH_VGA_DISABLE; else gmch_ctrl |= INTEL_GMCH_VGA_DISABLE; pci_write_config_word(dev_priv->bridge_dev, INTEL_GMCH_CTRL, gmch_ctrl); return 0; } #ifdef CONFIG_DEBUG_FS #include struct intel_display_error_state { struct intel_cursor_error_state { u32 control; u32 position; u32 base; u32 size; } cursor[2]; struct intel_pipe_error_state { u32 conf; u32 source; u32 htotal; u32 hblank; u32 hsync; u32 vtotal; u32 vblank; u32 vsync; } pipe[2]; struct intel_plane_error_state { u32 control; u32 stride; u32 size; u32 pos; u32 addr; u32 surface; u32 tile_offset; } plane[2]; }; struct intel_display_error_state * intel_display_capture_error_state(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_display_error_state *error; int i; error = kmalloc(sizeof(*error), GFP_ATOMIC); if (error == NULL) return NULL; for (i = 0; i < 2; i++) { error->cursor[i].control = I915_READ(CURCNTR(i)); error->cursor[i].position = I915_READ(CURPOS(i)); error->cursor[i].base = I915_READ(CURBASE(i)); error->plane[i].control = I915_READ(DSPCNTR(i)); error->plane[i].stride = I915_READ(DSPSTRIDE(i)); error->plane[i].size = I915_READ(DSPSIZE(i)); error->plane[i].pos= I915_READ(DSPPOS(i)); error->plane[i].addr = I915_READ(DSPADDR(i)); if (INTEL_INFO(dev)->gen >= 4) { error->plane[i].surface = I915_READ(DSPSURF(i)); error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i)); } error->pipe[i].conf = I915_READ(PIPECONF(i)); error->pipe[i].source = I915_READ(PIPESRC(i)); error->pipe[i].htotal = I915_READ(HTOTAL(i)); error->pipe[i].hblank = I915_READ(HBLANK(i)); error->pipe[i].hsync = I915_READ(HSYNC(i)); error->pipe[i].vtotal = I915_READ(VTOTAL(i)); error->pipe[i].vblank = I915_READ(VBLANK(i)); error->pipe[i].vsync = I915_READ(VSYNC(i)); } return error; } void intel_display_print_error_state(struct seq_file *m, struct drm_device *dev, struct intel_display_error_state *error) { int i; for (i = 0; i < 2; i++) { seq_printf(m, "Pipe [%d]:\n", i); seq_printf(m, " CONF: %08x\n", error->pipe[i].conf); seq_printf(m, " SRC: %08x\n", error->pipe[i].source); seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); seq_printf(m, "Plane [%d]:\n", i); seq_printf(m, " CNTR: %08x\n", error->plane[i].control); seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride); seq_printf(m, " SIZE: %08x\n", error->plane[i].size); seq_printf(m, " POS: %08x\n", error->plane[i].pos); seq_printf(m, " ADDR: %08x\n", error->plane[i].addr); if (INTEL_INFO(dev)->gen >= 4) { seq_printf(m, " SURF: %08x\n", error->plane[i].surface); seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset); } seq_printf(m, "Cursor [%d]:\n", i); seq_printf(m, " CNTR: %08x\n", error->cursor[i].control); seq_printf(m, " POS: %08x\n", error->cursor[i].position); seq_printf(m, " BASE: %08x\n", error->cursor[i].base); } } #endif