path: root/luni/src/main/java/java/util/zip/Deflater.java

/*
 * Licensed to the Apache Software Foundation (ASF) under one or more
 * contributor license agreements.  See the NOTICE file distributed with
 * this work for additional information regarding copyright ownership.
 * The ASF licenses this file to You under the Apache License, Version 2.0
 * (the "License"); you may not use this file except in compliance with
 * the License.  You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package java.util.zip;

import dalvik.system.CloseGuard;
import java.util.Arrays;
import libcore.util.EmptyArray;

/**
 * This class compresses data using the <i>DEFLATE</i> algorithm (see <a
 * href="http://www.gzip.org/algorithm.txt">specification</a>).
 *
 * <p>It is usually more convenient to use {@link DeflaterOutputStream}.
 *
 * <p>To compress an in-memory {@code byte[]} to another in-memory {@code byte[]} manually:
 * <pre>
 *     byte[] originalBytes = ...
 *
 *     Deflater deflater = new Deflater();
 *     deflater.setInput(originalBytes);
 *     deflater.finish();
 *
 *     ByteArrayOutputStream baos = new ByteArrayOutputStream();
 *     byte[] buf = new byte[8192];
 *     while (!deflater.finished()) {
 *         int byteCount = deflater.deflate(buf);
 *         baos.write(buf, 0, byteCount);
 *     }
 *     deflater.end();
 *
 *     byte[] compressedBytes = baos.toByteArray();
 * </pre>
 * <p>In situations where you don't have all the input in one array (or have so much
 * input that you want to feed it to the deflater in chunks), it's possible to call
 * {@link #setInput setInput} repeatedly, but you're much better off using
 * {@link DeflaterOutputStream} to handle all this for you. {@link DeflaterOutputStream} also helps
 * minimize memory requirements&nbsp;&mdash; the sample code above is very expensive.
 */
public class Deflater {

    /**
     * Upper bound for the compression level range.
     */
    public static final int BEST_COMPRESSION = 9;

    /**
     * Lower bound for compression level range.
     */
    public static final int BEST_SPEED = 1;

    /**
     * The default compression level.
     */
    public static final int DEFAULT_COMPRESSION = -1;

    /**
     * The default compression strategy.
     */
    public static final int DEFAULT_STRATEGY = 0;

    /**
     * The default compression method.
     */
    public static final int DEFLATED = 8;

    /**
     * A compression strategy.
     */
    public static final int FILTERED = 1;

    /**
     * A compression strategy.
     */
    public static final int HUFFMAN_ONLY = 2;

    /**
     * A compression level.
     */
    public static final int NO_COMPRESSION = 0;

    /**
     * Use buffering for best compression.
     *
     * @hide
     * @since 1.7
     */
    public static final int NO_FLUSH = 0;

    /**
     * Flush buffers so recipients can immediately decode the data sent thus
     * far. This mode may degrade compression.
     *
     * @hide
     * @since 1.7
     */
    public static final int SYNC_FLUSH = 2;

    /**
     * Flush buffers so recipients can immediately decode the data sent thus
     * far. The compression state is also reset to permit random access and
     * recovery for clients who have discarded or damaged their own copy. This
     * mode may degrade compression.
     *
     * @hide
     * @since 1.7
     */
    public static final int FULL_FLUSH = 3;

    /**
     * Flush buffers and mark the end of the data stream.
     */
    private static final int FINISH = 4;

    /**
     * The ugly name flushParm is for RI compatibility, should code need to access this
     * field via reflection if it's not able to use public API to choose what
     * kind of flushing it gets.
     */
    private int flushParm = NO_FLUSH;

    private boolean finished;

    private int compressLevel = DEFAULT_COMPRESSION;

    private int strategy = DEFAULT_STRATEGY;

    private long streamHandle = -1;

    private byte[] inputBuffer;

    private int inRead;

    private int inLength;

    private final CloseGuard guard = CloseGuard.get();

    /**
     * Constructs a new {@code Deflater} instance using the default compression
     * level. The strategy can be specified with {@link #setStrategy}. A
     * header is added to the output by default; use {@link
     * #Deflater(int, boolean)} if you need to omit the header.
     */
    public Deflater() {
        this(DEFAULT_COMPRESSION, false);
    }

    /**
     * Constructs a new {@code Deflater} instance using compression
     * level {@code level}. The strategy can be specified with {@link #setStrategy}.
     * A header is added to the output by default; use
     * {@link #Deflater(int, boolean)} if you need to omit the header.
     *
     * @param level
     *            the compression level in the range between 0 and 9.
     */
    public Deflater(int level) {
        this(level, false);
    }

    /**
     * Constructs a new {@code Deflater} instance with a specific compression
     * level. If {@code noHeader} is true, no ZLIB header is added to the
     * output. In a ZIP archive every entry (compressed file) comes with such a
     * header. The strategy can be specified using {@link #setStrategy}.
     *
     * @param level
     *            the compression level in the range between 0 and 9.
     * @param noHeader
     *            {@code true} indicates that no ZLIB header should be written.
     */
    public Deflater(int level, boolean noHeader) {
        if (level < DEFAULT_COMPRESSION || level > BEST_COMPRESSION) {
            throw new IllegalArgumentException();
        }
        compressLevel = level;
        streamHandle = createStream(compressLevel, strategy, noHeader);
        guard.open("end");
    }

    /**
     * Deflates the data (previously passed to {@link #setInput setInput}) into the
     * supplied buffer.
     *
     * @return number of bytes of compressed data written to {@code buf}.
     */
    public int deflate(byte[] buf) {
        return deflate(buf, 0, buf.length);
    }

    /**
     * Deflates data (previously passed to {@link #setInput setInput}) into a specific
     * region within the supplied buffer.
     *
     * @return the number of bytes of compressed data written to {@code buf}.
     */
    public synchronized int deflate(byte[] buf, int offset, int byteCount) {
        return deflateImpl(buf, offset, byteCount, flushParm);
    }

    /**
     * Deflates data (previously passed to {@link #setInput setInput}) into a specific
     * region within the supplied buffer, optionally flushing the input buffer.
     *
     * @param flush one of {@link #NO_FLUSH}, {@link #SYNC_FLUSH} or {@link #FULL_FLUSH}.
     * @return the number of compressed bytes written to {@code buf}. If this
     *      equals {@code byteCount}, the number of bytes of input to be flushed
     *      may have exceeded the output buffer's capacity. In this case,
     *      finishing a flush will require the output buffer to be drained
     *      and additional calls to {@link #deflate} to be made.
     * @hide
     * @since 1.7
     */
    public synchronized int deflate(byte[] buf, int offset, int byteCount, int flush) {
        if (flush != NO_FLUSH && flush != SYNC_FLUSH && flush != FULL_FLUSH) {
            throw new IllegalArgumentException("Bad flush value: " + flush);
        }
        return deflateImpl(buf, offset, byteCount, flush);
    }

    private synchronized int deflateImpl(byte[] buf, int offset, int byteCount, int flush) {
        checkOpen();
        Arrays.checkOffsetAndCount(buf.length, offset, byteCount);
        if (inputBuffer == null) {
            setInput(EmptyArray.BYTE);
        }
        return deflateImpl(buf, offset, byteCount, streamHandle, flush);
    }

    private native int deflateImpl(byte[] buf, int offset, int byteCount, long handle, int flushParm);

    /**
     * Frees all resources held onto by this deflating algorithm. Any unused
     * input or output is discarded. This method should be called explicitly in
     * order to free native resources as soon as possible. After {@code end()} is
     * called, other methods will typically throw {@code IllegalStateException}.
     */
    public synchronized void end() {
        guard.close();
        endImpl();
    }

    private void endImpl() {
        if (streamHandle != -1) {
            endImpl(streamHandle);
            inputBuffer = null;
            streamHandle = -1;
        }
    }

    private native void endImpl(long handle);

    @Override protected void finalize() {
        try {
            if (guard != null) {
                guard.warnIfOpen();
            }
            synchronized (this) {
                end(); // to allow overriding classes to clean up
                endImpl(); // in case those classes don't call super.end()
            }
        } finally {
            try {
                super.finalize();
            } catch (Throwable t) {
                throw new AssertionError(t);
            }
        }
    }

    /**
     * Indicates to the {@code Deflater} that all uncompressed input has been provided
     * to it.
     *
     * @see #finished
     */
    public synchronized void finish() {
        flushParm = FINISH;
    }

    /**
     * Returns true if {@link #finish finish} has been called and all
     * data provided by {@link #setInput setInput} has been
     * successfully compressed and consumed by {@link #deflate deflate}.
     */
    public synchronized boolean finished() {
        return finished;
    }

    /**
     * Returns the {@link Adler32} checksum of the uncompressed data read so far.
     */
    public synchronized int getAdler() {
        checkOpen();
        return getAdlerImpl(streamHandle);
    }

    private native int getAdlerImpl(long handle);

    /**
     * Returns the total number of bytes of input read by this {@code Deflater}. This
     * method is limited to 32 bits; use {@link #getBytesRead} instead.
     */
    public synchronized int getTotalIn() {
        checkOpen();
        return (int) getTotalInImpl(streamHandle);
    }

    private native long getTotalInImpl(long handle);

    /**
     * Returns the total number of bytes written to the output buffer by this {@code
     * Deflater}. The method is limited to 32 bits; use {@link #getBytesWritten} instead.
     */
    public synchronized int getTotalOut() {
        checkOpen();
        return (int) getTotalOutImpl(streamHandle);
    }

    private native long getTotalOutImpl(long handle);

    /**
     * Returns true if {@link #setInput setInput} must be called before deflation can continue.
     * If all uncompressed data has been provided to the {@code Deflater},
     * {@link #finish} must be called to ensure the compressed data is output.
     */
    public synchronized boolean needsInput() {
        if (inputBuffer == null) {
            return true;
        }
        return inRead == inLength;
    }

    /**
     * Resets the {@code Deflater} to accept new input without affecting any
     * previously made settings for the compression strategy or level. This
     * operation <i>must</i> be called after {@link #finished} returns
     * true if the {@code Deflater} is to be reused.
     */
    public synchronized void reset() {
        checkOpen();
        flushParm = NO_FLUSH;
        finished = false;
        resetImpl(streamHandle);
        inputBuffer = null;
    }

    private native void resetImpl(long handle);

    /**
     * Sets the dictionary to be used for compression by this {@code Deflater}.
     * This method can only be called if this {@code Deflater} supports the writing
     * of ZLIB headers. This is the default, but can be overridden
     * using {@link #Deflater(int, boolean)}.
     */
    public void setDictionary(byte[] dictionary) {
        setDictionary(dictionary, 0, dictionary.length);
    }

    /**
     * Sets the dictionary to be used for compression by this {@code Deflater}.
     * This method can only be called if this {@code Deflater} supports the writing
     * of ZLIB headers. This is the default, but can be overridden
     * using {@link #Deflater(int, boolean)}.
     */
    public synchronized void setDictionary(byte[] buf, int offset, int byteCount) {
        checkOpen();
        Arrays.checkOffsetAndCount(buf.length, offset, byteCount);
        setDictionaryImpl(buf, offset, byteCount, streamHandle);
    }

    private native void setDictionaryImpl(byte[] buf, int offset, int byteCount, long handle);

    /**
     * Sets the input buffer the {@code Deflater} will use to extract uncompressed bytes
     * for later compression.
     */
    public void setInput(byte[] buf) {
        setInput(buf, 0, buf.length);
    }

    /**
     * Sets the input buffer the {@code Deflater} will use to extract uncompressed bytes
     * for later compression.
     */
    public synchronized void setInput(byte[] buf, int offset, int byteCount) {
        checkOpen();
        Arrays.checkOffsetAndCount(buf.length, offset, byteCount);
        inLength = byteCount;
        inRead = 0;
        if (inputBuffer == null) {
            setLevelsImpl(compressLevel, strategy, streamHandle);
        }
        inputBuffer = buf;
        setInputImpl(buf, offset, byteCount, streamHandle);
    }

    private native void setLevelsImpl(int level, int strategy, long handle);

    private native void setInputImpl(byte[] buf, int offset, int byteCount, long handle);

    /**
     * Sets the compression level to be used when compressing data. The
     * compression level must be a value between 0 and 9. This value must be set
     * prior to calling {@link #setInput setInput}.
     * @exception IllegalArgumentException
     *                If the compression level is invalid.
     */
    public synchronized void setLevel(int level) {
        if (level < DEFAULT_COMPRESSION || level > BEST_COMPRESSION) {
            throw new IllegalArgumentException("Bad level: " + level);
        }
        if (inputBuffer != null) {
            throw new IllegalStateException("setLevel cannot be called after setInput");
        }
        compressLevel = level;
    }

    /**
     * Sets the compression strategy to be used. The strategy must be one of
     * FILTERED, HUFFMAN_ONLY or DEFAULT_STRATEGY. This value must be set prior
     * to calling {@link #setInput setInput}.
     *
     * @exception IllegalArgumentException
     *                If the strategy specified is not one of FILTERED,
     *                HUFFMAN_ONLY or DEFAULT_STRATEGY.
     */
    public synchronized void setStrategy(int strategy) {
        if (strategy < DEFAULT_STRATEGY || strategy > HUFFMAN_ONLY) {
            throw new IllegalArgumentException("Bad strategy: " + strategy);
        }
        if (inputBuffer != null) {
            throw new IllegalStateException("setStrategy cannot be called after setInput");
        }
        this.strategy = strategy;
    }

    /**
     * Returns the total number of bytes read by the {@code Deflater}. This
     * method is the same as {@link #getTotalIn} except that it returns a
     * {@code long} value instead of an integer.
     */
    public synchronized long getBytesRead() {
        checkOpen();
        return getTotalInImpl(streamHandle);
    }

    /**
     * Returns a the total number of bytes written by this {@code Deflater}. This
     * method is the same as {@code getTotalOut} except it returns a
     * {@code long} value instead of an integer.
     */
    public synchronized long getBytesWritten() {
        checkOpen();
        return getTotalOutImpl(streamHandle);
    }

    private native long createStream(int level, int strategy1, boolean noHeader1);

    private void checkOpen() {
        if (streamHandle == -1) {
            throw new IllegalStateException("attempt to use Deflater after calling end");
        }
    }
}