"Yes"
"No"
Unknown
WIRELESS & NETWORKS
DEVICE
PERSONAL
SYSTEM
Turn on radio
Turn off radio
Turn on IMS registration required
Turn off IMS registration required
View SIM address book
View Fixed Dialing Numbers
View Service Dialing Numbers
Get PDP list
In service
Out of service
Emergency calls only
Radio off
Roaming
Not roaming
Idle
Ringing
Call in progress
Disconnected
Connecting
Connected
Suspended
unknown
pkts
bytes
dBm
asu
LAC
CID
Unmount USB storage
Unmount SD card
Erase USB storage
Erase SD card
Small
Medium
Large
Servez à ce monsieur une bière et des kiwis.
OK
USB storage
SD card
Battery status:
Power plug:
Battery scale:
Battery level:
Battery health:
Battery technology:
Battery voltage:
mV
Battery temperature:
\u00B0 C
Time since boot:
Awake time on battery:
Awake time when charging:
Screen ON time:
Unknown
Charging
(AC)
(USB)
Discharging
Not charging
Full
Unplugged
AC
USB
AC+USB
Unknown
Unknown
Good
Overheat
Dead
Over voltage
Unknown error
Cold
Bluetooth
Discoverable
Visible to all nearby Bluetooth devices (%1$s)
Visible to all nearby Bluetooth devices
Not visible to other Bluetooth devices
Only visible to paired devices
Make device discoverable
Visibility timeout
Set how long device will be discoverable
Lock voice dialing
Prevent use of the bluetooth dialer when the screen is locked
Bluetooth devices
Device name
No name set, using account name
Scan for devices
Rename tablet
Rename phone
Rename
Disconnect?
This will end your connection with:<br><b>%1$s</b>
Disable profile?
This will disable:<br><b>%1$s</b><br><br>From:<br><b>%2$s</b>
Connected
Connected (no phone)
Connected (no media)
Connected (no phone or media)
Disconnected
Disconnecting\u2026
Connecting\u2026
Pairing\u2026
Unnamed Bluetooth device
Searching
Tap to pair
No Bluetooth devices were found nearby.
Bluetooth pairing request
Pairing request
Select to pair with %1$s
Show received files
Bluetooth device picker
"Bluetooth permission request"
"An application is requesting permission to turn on Bluetooth. Do you want to do this?"
"An application on your tablet is requesting permission to make your tablet discoverable by other Bluetooth devices for %1$d seconds. Do you want to do this?"
"An application on your phone is requesting permission to make your phone discoverable by other Bluetooth devices for %1$d seconds. Do you want to do this?"
"An application on your tablet is requesting permission to make your tablet \u201calways discoverable\u201d by other Bluetooth devices. Do you want to do this?"
"An application on your phone is requesting permission to make your phone \u201calways discoverable\u201d by other Bluetooth devices. Do you want to do this?"
"An application on your tablet is requesting permission to turn on Bluetooth and to make your tablet discoverable by other devices for %1$d seconds. Do you want to do this?"
"An application on your phone is requesting permission to turn on Bluetooth and to make your phone discoverable by other devices for %1$d seconds. Do you want to do this?"
"An application on your tablet is requesting permission to turn on Bluetooth and to make your tablet discoverable by other devices. Do you want to do this?"
"An application on your phone is requesting permission to turn on Bluetooth and to make your phone discoverable by other devices. Do you want to do this?"
"Turning Bluetooth on\u2026"
"Turning Bluetooth off\u2026"
Auto connect
"Bluetooth connection request"
"Touch to connect to \u0022%1$s\u0022"
"Do you want to connect to \u0022%1$s\u0022?"
"Phone book request"
%1$s would like to access your contacts and call history. Give access to %2$s?
Don\'t ask again
Date & time settings
1:00 pm
13:00
Select time zone
MM/dd/yyyy
Regional (%s)
Preview:
Font size:
Data:
Send broadcast
Action:
Start activity
Resource:
Account:
Proxy settings
Clear
Proxy port
8080
Bypass proxy for
example.com,mycomp.test.com,localhost
Restore defaults
Done
Proxy hostname
proxy.example.com
Attention
OK
The hostname you typed is not valid.
The exclusion list you typed is not properly formatted. Please enter a comma-separated list of excluded domains.
You must complete the port field.
The port field must be empty if the host field is empty.
The port you typed is not valid.
The HTTP proxy is used by the browser but may not be used by the other applications
Location:
Neighboring CID:
Data attempts:
GPRS service:
Roaming:
IMEI:
Call redirect:
Number of PPP reset since boot:
GSM disconnects:
Current network:
Data successes:
PPP received:
GSM service:
Signal strength:
Call status:
PPP sent:
Radio resets:
Message waiting:
Phone number:
Select radio band
Network type:
Set preferred network type:
Ping IpAddr:
Ping Hostname(www.google.com):
HTTP Client test:
Run ping test
SMSC:
Update
Refresh
Toggle DNS check
OEM-specific Info/Settings
Set GSM/UMTS band
Loading band list\u2026
Set
Unsuccessful
Successful
Changes take effect when USB cable is reconnected
Enable USB mass storage
Total bytes:
USB storage not mounted
No SD card
Available bytes:
USB storage is being used as a mass storage device
SD card is being used as a mass storage device
It is now safe to remove the USB storage
It is now safe to remove the SD card
USB storage was removed while still in use!
SD card was removed while still in use!
Used bytes:
Scanning USB storage for media\u2026
Scanning SD card for media\u2026
USB storage mounted read-only
SD card mounted read-only
Skip
Next
Language
Select activity
Debug intent sender
Device info
Battery info
Screen
Tablet info
Phone info
USB storage
SD card
Proxy settings
Cancel
Settings
Settings
Settings shortcut
Airplane mode
More\u2026
Wireless & networks
Manage Wi-Fi, Bluetooth, airplane mode, mobile networks, & VPNs
Data roaming
Connect to data services when roaming
Connect to data services when roaming
You have lost data connectivity because you left your home network with data roaming turned off.
Turn it on
Allow data roaming? You may incur significant roaming charges!
Attention
Operator selection
Select a network operator
Date & time
Set date and time
Set date, time, time zone & formats
Automatic date & time
Use network-provided time
Use network-provided time
Automatic time zone
Use network-provided time zone
Use network-provided time zone
Use 24-hour format
Set time
Select time zone
Set date
Select date format
Sort alphabetically
Sort by time zone
Date
Time
Automatically lock
%1$s after sleep
Show owner info on lock screen
Owner info
Enter text to display on the lock screen
Location services
Security
Set My Location, screen unlock, SIM card lock, credential storage lock
Set My Location, screen unlock, credential storage lock
Passwords
Encryption
Encrypt tablet
Encrypt phone
Require a numeric PIN or password to decrypt your tablet each time you
power it on
Require a numeric PIN or password to decrypt your phone each time you
power it on
Encrypted
You can encrypt your accounts, settings, downloaded applications and their data,
media, and other files. Once you encrypt your tablet, you must enter a numeric PIN
or password to decrypt it each time you power it on: you can\'t unencrypt your tablet
except by performing a factory data reset, erasing all your data.\n\nEncryption takes
an hour or more. You must start with a charged battery and keep your tablet plugged in
until encryption is complete. If you interrupt the encryption process, you will lose
some or all of your data.
You can encrypt your accounts, settings, downloaded applications and their data,
media, and other files. Once you encrypt your phone, you must enter a numeric PIN or
password to decrypt it each time you power it on: you can\'t unencrypt your phone
except by performing a factory data reset, erasing all your data.\n\nEncryption takes
an hour or more. You must start with a charged battery and keep your phone plugged in
until encryption is complete. If you interrupt the encryption process, you will lose
some or all of your data.
Encrypt tablet
Encrypt phone
Please charge your battery and try again.
Please plug in your charger and try again.
No lock screen PIN or password
You must set a lock screen PIN or
password before you can start encryption.
Confirm encryption
Encrypt tablet? This operation is irreversible and if you interrupt it, you will lose data.
Encryption takes an hour or more, during which the tablet will restart several times.
Encrypt phone? This operation is irreversible and if you interrupt it, you will lose data.
Encryption takes an hour or more, during which the phone will restart several times.
Encrypting
Please wait while your tablet
is being encrypted. ^1% complete.
Please wait while your phone
is being encrypted. ^1% complete.
Try again in ^1 seconds.
Enter your password
Encryption unsuccessful
Encryption was interrupted and can\'t complete. As a result, the data on
your tablet is no longer accessible.
\n\n
To resume using your tablet, you must perform a factory reset.
When you set up your tablet after the reset, you\'ll have an opportunity
to restore any data that was backed up to your Google Account.
Encryption was interrupted and can\'t complete. As a result, the data on
your phone is no longer accessible.
\n\nTo resume using your phone, you must perform a factory reset.
When you set up your phone after the reset, you\'ll have an opportunity
to restore any data that was backed up to your Google Account.
Screen lock
Choose backup lock
Screen lock
Change lock screen
Change or disable pattern, PIN, or password security
Choose a method to lock the screen
When conditions for FaceLock aren\'t ideal, how do you want to unlock?
None
Slide
No security
FacePass
Low security, experimental
Pattern
Medium security
PIN
Medium to high security
Password
High security
Disabled by administrator, encryption policy, or credential storage
None
Slide
FacePass
Secured with pattern
Secured with PIN
Secured with password
Turn off screen lock
Remove unlock pattern
Remove unlock PIN
Remove unlock password
Change unlock pattern
Change unlock PIN
Change unlock password
Password must be at least %d characters
PIN must be at least %d characters
Touch Continue when done
Continue
Password must be fewer than %d characters
PIN must be fewer than %d digits
PIN must contain only digits 0-9
Device administrator disallows using a recent PIN
Password contains an illegal character
Password must contain at least one letter
Password must contain at least one digit
Password must contain at least one symbol
- Password must contain at least 1 letter
- Password must contain at least %d letters
- Password must contain at least 1 lowercase letter
- Password must contain at least %d lowercase letters
- Password must contain at least 1 uppercase letter
- Password must contain at least %d uppercase letters
- Password must contain at least 1 numerical digit
- Password must contain at least %d numerical digits
- Password must contain at least 1 special symbol
- Password must contain at least %d special symbols
- Password must contain at least 1 non-letter character
- Password must contain at least %d non-letter characters
Device administrator disallows using a recent password
OK
Cancel
Cancel
Next
Device administration
Device administrators
View or deactivate device administrators
Bluetooth
Turn on Bluetooth
Bluetooth
Bluetooth
Manage connections, set device name & discoverability
Bluetooth pairing request
To pair with:<br><b>%1$s</b><br><br>Enter the device\'s required PIN:
To pair with:<br><b>%1$s</b><br><br>Enter the device\'s required passkey:
PIN contains letters or symbols
Usually 0000 or 1234
You may also need to enter this PIN on the other device.
You may also need to enter this passkey on the other device.
To pair with:<br><b>%1$s</b><br><br>Make sure it is showing this passkey:<br><b>%2$s</b>
From:<br><b>%1$s</b><br><br>Pair with this device?
To pair with:<br><b>%1$s</b><br><br>Type on it:<br><b>%2$s</b>, then Return or Enter.
Pair
Cancel
Attention
There was a problem pairing with %1$s.
There was a problem pairing with %1$s because the PIN or Passkey is incorrect.
Cannot establish communication with %1$s.
Pairing rejected by %1$s.
There was a problem connecting to %1$s.
Scan for devices
Search for devices
Searching\u2026
Device settings
Paired devices
Available devices
Connect
Disconnect
Pair & connect
Unpair
Disconnect & unpair
Options\u2026
Advanced
Advanced Bluetooth
To see devices, turn Bluetooth on.
Connect to\u2026
Media audio
Phone audio
File transfer
Input device
Internet access
Internet connection sharing
%1$s will be disconnected from media audio.
%1$s will be disconnected from handsfree audio.
%1$s will be disconnected from input device.
Internet access via %1$s will be disconnected.
%1$s will be disconnected from sharing this tablet\'s Internet connection.
%1$s will be disconnected from sharing this phone\'s Internet connection.
Paired Bluetooth device
Connect
Connect to Bluetooth device
Profiles
Rename
Allow incoming file transfers
Connected to media audio
Connected to phone audio
Connected to file transfer server
Not connected to file transfer server
Connected to input device
Connected to device for Internet access
Sharing local Internet connection with device
Use for media audio
Use for phone audio
Use for file transfer
Use for input
Use for Internet access
Dock Settings
Use dock for audio
As speaker phone
For music and media
Remember settings
NFC
Allow devices separated by a few centimeters to exchange information
Android Beam
On
Off
Unavailable because NFC is turned off
Android Beam
When this feature is turned on, you can beam app content to another NFC-capable device by holding the devices close together. For example, you can beam Browser pages, YouTube videos, People contacts, and more.\n\nJust bring the devices together (typically back to back) and then touch your screen. The app determines what gets beamed.
Wi-Fi
Turn on Wi-Fi
Wi-Fi
Wi-Fi settings
Wi-Fi
Set up & manage wireless access points
Turning Wi-Fi on\u2026
Turning off Wi-Fi\u2026
Error
In airplane mode
Unable to scan for networks
Network notification
Notify me when an open network is available
Avoid poor connections
Don\'t use a Wi-Fi network unless it has a decent internet connection
Keep Wi-Fi during sleep
There was a problem changing the setting
Add network
Wi-Fi networks
Scan
Advanced
Connect to network
Forget network
Modify network
To see available networks, turn Wi-Fi on.
Show advanced options
WPS
Enter pin from access point
WPS Setup
Enter the pin %1$s on the access point
WPS is already in progress and can take tens of seconds to complete
Couldn\'t start WPS, try again.
Network SSID
Security
Signal strength
Status
Link speed
IP address
192.168.1.128
EAP method
Phase 2 authentication
CA certificate
User certificate
Identity
Anonymous identity
Password
Show password
IP settings
(unchanged)
(unspecified)
Saved
Disabled
Avoided poor internet connection
Details
Network avoided due to poor connection. You can turn off this behavior of avoiding a network with poor connection in advanced menu of Wi-Fi settings.
Authentication problem
Not in range
WPS available
\u0020(WPS available)
Secured with %1$s
, secured with %1$s
WEP
WPA
WPA2
WPA/WPA2
@string/wifi_security_short_wpa_wpa2
802.1x
None
WEP
WPA PSK
WPA2 PSK
WPA/WPA2 PSK
@string/wifi_security_wpa_wpa2
802.1x EAP
Connect
Forget
Save
Cancel
Another WPS session detected, please retry in a few minutes
Advanced Wi-Fi
Wi-Fi frequency band
Specify the frequency range of operation
There was a problem setting the frequency band.
MAC address
IP address
IP settings
Save
Cancel
Please type a valid IP address.
Please type a valid gateway address.
Please type a valid dns address.
Please type a network prefix length between 0 and 32.
DNS 1
8.8.8.8
DNS 2
4.4.4.4
Gateway
192.168.1.1
Network prefix length
24
Wi-Fi Direct
Setup peer-to-peer connectivity
Device Information
Wi-Fi Protected Setup
Enter pin
Remember this connection
Search
Create group
Remove group
Advanced
Available Devices
Portable Wi-Fi hotspot
Portable hotspot %1$s active
Portable Wi-Fi hotspot error
Configure Wi-Fi hotspot
%1$s %2$s portable Wi-Fi hotspot
AndroidHotspot
Wifi information
disableNetwork
enableNetwork
disconnect
getConfiguredNetworks
getConnectionInfo
Wi-Fi API
Wi-Fi Status
Refresh Stats
Wi-Fi State :
Network State :
Supplicant State :
RSSI :
BSSID :
SSID :
Hidden SSID :
IPaddr :
MAC addr :
Network ID :
Link Speed :
Scan results :
Disabling
Disabled
Enabling
Enabled
Unknown
Wi-Fi Config
Configured Networks
Display
Sound
Silent mode
Phone ringtone
""
Volumes
Music Effects
Ringer volume
Vibrate when silent
Vibrate
Default notification
Pulse notification light
Ringtone
Notification
Use incoming call volume for notifications
Select notification ringtone
Media
Set volume for music and videos
Alarm
Audio settings for the attached dock
Dial pad touch tones
Touch sounds
Screen lock sound
Vibrate on touch
Noise cancellation
Music, video, games & other media
Ringtone & notifications
Notifications
Alarms
Dock
Dock settings
Audio
Settings for the attached desktop dock
Settings for the attached car dock
Tablet not docked
Phone not docked
Settings for the attached dock
Dock not found
The tablet must be docked to configure dock audio
The phone must be docked to configure dock audio
Dock insertion sound
Play sound when inserting or removing tablet from dock
Play sound when inserting or removing phone from dock
Don\'t play sound when inserting or removing tablet from dock
Don\'t play sound when inserting or removing phone from dock
Accounts & sync
Search
Manage search settings and history
Display
Auto-rotate screen
Switch orientation automatically when rotating tablet
Switch orientation automatically when rotating phone
Switch orientation automatically when rotating tablet
Switch orientation automatically when rotating phone
Brightness
Adjust the brightness of the screen
Sleep
After %1$s of inactivity
Wallpaper
Select wallpaper from
Android Dreams
Screen savers and other idle diversions
Selected dream
When to activate
After %1$s spent idle
Never
Try it!
Automatic brightness
Font size
%1$s
Font size
SIM card lock settings
Set up SIM card lock
SIM card lock
Lock SIM card
Require PIN to use tablet
Require PIN to use phone
Require PIN to use tablet
Require PIN to use phone
Change SIM PIN
SIM PIN
Lock SIM card
Unlock SIM card
Old SIM PIN
New SIM PIN
Re-type new PIN
SIM PIN
Incorrect PIN!
PINs don\'t match!
Unable to change PIN.\nPossibly incorrect PIN.
SIM PIN changed successfully
Unable to change SIM card lock state.\nPossibly incorrect PIN.
OK
Cancel
Tablet status
Phone status
System updates
""
Android version
Model number
Baseband version
Kernel version
Build number
Not available
Status
Status
Status of the battery, network, and other information
Phone number, signal, etc.
Storage
Storage settings
Unmount USB storage, view available storage
Unmount SD card, view available storage
IMEI
IMEI SV
MDN
My phone number
MIN
MSID
PRL Version
MEID
ICCID
Mobile network type
Mobile network state
Service state
Signal strength
Roaming
Network
Wi-Fi MAC address
Bluetooth address
Serial number
Unavailable
Up time
Awake time
Internal storage
USB storage
SD card
Available
Total space
Calculating…
Applications
Media
Downloads
Pictures, Videos
Audio (music, ringtones, podcasts etc)
Misc.
Unmount shared storage
Unmount SD card
Unmount the internal USB storage
Unmount the SD card so you can safely remove it
Insert USB storage for mounting
Insert an SD card for mounting
Mount USB storage
Mount SD card
Erase USB storage
Erase SD card
Erases all data on the internal USB storage, such as music and photos
Erases all data on the SD card, such as music and photos
\u0020(Read-only)
Unmount USB storage
Unmount SD card
If you unmount the USB storage, some applications you are using will stop and may be unavailable until you remount the USB storage.
If you unmount the SD card, some applications you are using will stop and may be unavailable until you remount the SD card.
Couldn\'t unmount USB storage
Couldn\'t unmount SD card
Cannot unmount USB storage. Try again later.
Cannot unmount SD card. Try again later.
USB storage will be unmounted.
SD card will be unmounted.
Unmounting
Unmount in progress
USB computer connection
USB computer connection
Connect as
Media device (MTP)
Lets you transfer media files on Windows, or using Android File Transfer on Mac (see www.android.com/filetransfer)
Camera (PTP)
Lets you transfer photos using camera software, and transfer any files on computers that don\'t support MTP
"Install file-transfer tools"
Battery status
Battery level
APNs
Edit access point
<Not set>
Name
APN
Proxy
Port
Username
Password
Server
MMSC
MMS proxy
MMS port
MCC
MNC
Authentication type
None
PAP
CHAP
PAP or CHAP
APN type
APN protocol
APN Enable/Disable
APN Enabled
APN Disabled
Bearer
Delete APN
New APN
Save
Discard
Attention
The Name field cannot be empty.
The APN cannot be empty.
MCC field must be 3 digits.
MNC field must be 2 or 3 digits.
Restoring default APN settings
Reset to default
Reset default APN settings completed
Factory data reset
Erases all data on tablet
Erases all data on phone
"This will erase all data from your tablet\'s internal storage, including:\n\nYour Google Account\nSystem and application data and settings\nDownloaded applications"
"This will erase all data from your phone\'s internal storage, including:\n\nYour Google Account\nSystem and application data and settings\nDownloaded applications"
"\n\nYou are currently signed into the following accounts:\n"
"Music\nPhotos\nOther user data"
"\n\nTo also clear music, pictures, and other user data, the USB storage needs to be erased."
"\n\nTo also clear music, pictures, and other user data, the SD card needs to be erased."
Erase USB storage
Erase SD card
Erase all the data on the internal USB storage, such as music or photos.
Erase all the data on the SD card, such as music or photos.
Reset tablet
Reset phone
Erase all of your personal information and any downloaded applications? It is impossible to reverse this action!
Erase everything
Draw your unlock pattern
You must draw your unlock pattern to confirm a factory data reset.
No reset was performed because the System Clear service is not available.
Confirm reset
Erase USB storage
Erase SD card
Erases all data in USB storage
Erases all data on the SD card
This action will erase the USB storage. You will lose all data stored there!
This action will erase the SD card. You will lose all data on the card!
Erase USB storage
Erase SD card
Erase USB storage, deleting all files stored there? Action cannot be reversed!
Erase SD card, deleting all files stored there? Action cannot be reversed!
Erase everything
Draw your unlock pattern
You must draw your unlock pattern to confirm that you want to erase the USB storage.
You must draw your unlock pattern to confirm that you want to erase the SD card.
Call settings
Set up voicemail, call forwarding, call waiting, caller ID
USB tethering
Portable hotspot
Bluetooth tethering
Tethering
Tethering & portable hotspot
USB
USB tethering
USB connected, check to tether
Tethered
Can\'t tether when USB storage in use
USB not connected
USB tethering error
Bluetooth tethering
Sharing this tablet\'s Internet connection
Sharing this phone\'s Internet connection
Sharing this tablet\'s Internet connection to 1 device
Sharing this phone\'s Internet connection to 1 device
Sharing this tablet\'s Internet connection to %1$d devices
Sharing this phone\'s Internet connection to %1$d devices
Not sharing this tablet\'s Internet connection
Not sharing this phone\'s Internet connection
Bluetooth tethering error
Cannot tether to more than %1$d devices
%1$s will be untethered.
Help
Mobile networks
My Location
Google\'s location service
Let apps use data from sources such as Wi-Fi and mobile networks to determine your approximate location
Location determined by Wi-Fi
GPS satellites
Let apps use GPS to pinpoint your location
Use assisted GPS
Use server to assist GPS (uncheck to reduce network usage)
Use server to assist GPS (uncheck to improve GPS performance)
Location & Google search
Let Google use your location to improve search results and other services
About tablet
About phone
View legal info, status, software version
Legal information
Contributors
Copyright
License
Terms and conditions
System tutorial
Learn how to use your tablet
Learn how to use your phone
Open source licenses
There is a problem loading the licenses.
Loading\u2026
Safety information
Safety information
You do not have a data connection. To view this information now, go to %s from any computer connected to the Internet.
Loading\u2026
Choose your password
Choose your pattern
Choose your PIN
Confirm your password
Confirm your pattern
Confirm your PIN
Passwords don\'t match
PINs don\'t match
Unlock selection
Password has been set
PIN has been set
Pattern has been set
Screen security
Change unlock pattern
Change unlock PIN
Confirm saved pattern
Sorry, try again:
Draw an unlock pattern
Press Menu for help.
Release finger when done.
Connect at least %d dots. Try again:
Pattern recorded!
Draw pattern again to confirm:
Your new unlock pattern:
Confirm
Redraw
Retry
Continue
Unlock pattern
Require pattern
Must draw pattern to unlock screen
Make pattern visible
Vibrate on touch
Set unlock pattern
Change unlock pattern
How to draw an unlock pattern
Too many incorrect attempts!
Try again in %d seconds.
Cancel
Next
Securing your tablet
Securing your phone
Protect your tablet from unauthorized use by creating a personal screen unlock pattern. Use your finger to connect the dots in any order on the next screen. You must connect at least four dots.
\n\nReady to start? Touch \u201CNext\u201D.
Protect your phone from unauthorized use by creating a personal screen unlock pattern. Use your finger to connect at least four dots in any order on the next screen.
\n\nReady to start? Touch \u201CNext\u201D.
Manage applications
Manage and remove installed applications
Applications
Manage applications, set up quick launch shortcuts
Application settings
Unknown sources
Allow installation of non-Market applications
Your tablet and personal data are more vulnerable to attack by applications
from unknown sources. You agree that you are solely responsible for any
damage to your tablet or loss of data that may result from using
these applications.
Your phone and personal data are more vulnerable to attack by applications
from unknown sources. You agree that you are solely responsible for any
damage to your phone or loss of data that may result from using
these applications.
Advanced settings
Enable more settings options.
Application info
Storage
Launch by default
Screen compatibility
Permissions
Cache
Clear cache
Cache
Controls
Force stop
Total
Application
USB storage app
Data
USB storage data
SD card
Uninstall
Disable
Enable
Clear data
Uninstall updates
You have selected to launch this application by default for some actions.
No defaults set.
Clear defaults
This application may not be designed for your screen; you can control how it
adjusts to your screen here.
Ask when launched
Scale application
Unknown
Sort by name
Sort by size
Show running services
Show cached processes
Manage space
Filter
Select filter options
All
Downloaded
Running
USB storage
On SD card
Disabled
No applications.
Internal storage
USB storage
SD card storage
Recomputing size\u2026
Delete
All of this application\'s data will be deleted permanently. This includes all files, settings, accounts, databases and so on.
OK
Cancel
Application not found
The application was not
found in the list of installed applications.
Unable to clear application data.
Uninstall updates
Do you want to uninstall all updates to this Android system application?
Clear data
Couldn\'t clear data for application.
This application can access the following on your tablet:
This application can access the following on your phone:
Computing\u2026
Unable to compute package size
You do not have any third-party applications installed.
version %1$s
Move
Move to tablet
Move to phone
Move to USB storage
Move to SD card
Moving
There is not enough storage left.
The application does not exist.
The application is copy-protected.
The specified install location is not valid.
System updates cannot be installed on external media.
Force stop
Force stopping an application can cause it to misbehave. Are you sure?
Move application
Couldn\'t move application. %1$s
Preferred install location
Change the preferred installation location for new applications.
Disable built-in app
Disabling a built-in application may cause other applications
to misbehave. Are you sure?
Storage use
View storage used by applications
Running services
View and control currently running services
Restarting
Cached background process
Nothing running.
Started by application.
%1$s
%1$s free
%1$s used
RAM
%1$s
%1$d
process and %2$d service
%1$d
process and %2$d services
%1$d
processes and %2$d service
%1$d
processes and %2$d services
Running application
Not active
Services
Processes
Stop
Settings
This service was started by its
application. Stopping it may cause the application to fail.
This application can not safely
be stopped. Doing so may lose some of your current work.
This is an old application
process that is being kept for better speed in case it is needed again.
There is usually no reason to stop it.
%1$s:
currently in use. Touch Settings to control it.
Main process that is in use.
Service %1$s
is in use.
Provider %1$s
is in use.
Stop system service?
Are you sure you want to stop this system service? If you do, some
features of your tablet may stop working correctly until you power it off
and then on again.
Are you sure you want to stop this system service? If you do, some
features of your phone may stop working correctly until you power it off
and then on again.
Language & input
Language & input
Language settings
Keyboard & input methods
Language
""
Auto-replace
Correct mistyped words
Auto-capitalization
Capitalize first letter in sentences
Auto-punctuate
Physical keyboard settings
Press Space key twice to insert \u0022.\u0022
Make passwords visible
This input method may be able to collect
all the text you type, including personal data like passwords and credit
card numbers. It comes from the application
%1$s.
Use this input method?
Mouse/trackpad
Pointer speed
User dictionary
Personal dictionary
Personal dictionaries
""
Add
Add to dictionary
Edit word
Edit
Delete
You do not have any words in the user dictionary. You can add a word by touching the Add ( + ) button.
All languages
Testing
Tablet information
Phone information
Battery information
SIM toolkit
Quick launch
Set keyboard shortcuts to launch applications
Assign application
No shortcut
Search + %1$s
Clear
Your shortcut for %1$s (%2$s) will be cleared.
OK
Cancel
Applications
Shortcuts
Text input
Input method
Default
Input method selector
Automatic
Always show
Always hide
Configure input methods
Settings
Settings
Active input methods
Use system language
%1$s settings
Select active input methods
Onscreen keyboard settings
Physical keyboard
Physical keyboard settings
Developer options
Set options for application development
USB debugging
Debug mode when USB is connected
Stay awake
Screen will never sleep while charging
Allow mock locations
Allow mock locations
Allow USB debugging?
USB debugging is intended for development purposes only. It can be used to copy data between your computer and your device, install applications on your device without notification, and read log data.
Choose gadget
Choose widget
%1$dd %2$dh %3$dm %4$ds
%1$dh %2$dm %3$ds
%1$dm %2$ds
%1$ds
Usage statistics
Usage statistics
Sort by:
Application
Count
Usage time
Accessibility
Accessibility settings
Services
System
Large text
Power button ends call
Explore by touch
When Explore by Touch is turned on,
you can hear or see descriptions of what\'s under your finger.\n\n This feature is for low-vision users.
Touch & hold delay
Install accessibility scripts
Settings
Tutorial
On
Off
Allowed
Not allowed
Allow
Don\'t Allow
Use
%1$s?
%1$s can
collect all of the text you type, except passwords. This includes personal data such as credit card
numbers. It can also collect data about your interactions with the tablet.
%1$s can
collect all of the text you type, except passwords. This includes personal data such as credit card
numbers. It can also collect data about your interactions with the phone.
Stop
%1$s?
Touching OK will
stop %1$s.
No services installed
Need a screen reader?
TalkBack provides spoken feedback to
help blind and low-vision users. Do you want to install it for free from Android
Market?
Install accessibility scripts?
Do you want applications to install
scripts from Google that will make their content more accessible?
This feature changes the
way your device responds to touch. Turn on?
No description provided.
Settings
Battery
What has been using the battery
Battery usage data not available
%1$s - %2$s
Battery use since unplugged
Battery use since reset
%1$s on battery
%1$s since unplugged
Charging
Screen on
GPS on
Wi-Fi
Awake
Mobile network signal
@string/menu_stats_last_unplugged
Device awake time
Wi-Fi on time
Wi-Fi on time
%1$s" - "
%2$s%%
History details
Use details
Use details
Adjust power use
Included packages
Screen
Wi-Fi
Bluetooth
Cell standby
Voice calls
Tablet idle
Phone idle
CPU total
CPU foreground
Keep awake
GPS
Wi-Fi running
Tablet
Phone
Data sent
Data received
Audio
Video
Time on
Time without a signal
Force stop
Application info
Application settings
Screen settings
Wi-Fi settings
Bluetooth settings
Battery used by voice calls
Battery used when tablet is idle
Battery used when phone is idle
Battery used by cell radio
Switch to airplane mode to save power in areas with no cell coverage
Battery used by the display and backlight
Reduce the screen brightness and/or screen timeout
Battery used by Wi-Fi
Turn off Wi-Fi when not using it or where it is not available
Battery used by bluetooth
Turn off bluetooth when you aren\'t using it
Try connecting to a different bluetooth device
Battery used by application
Stop or uninstall the application
"Manually control GPS to prevent application from using it"
The application may offer settings to reduce battery use
%1$s since unplugged
While last unplugged for %1$s
Usage totals
Refresh
Android OS
Mediaserver
Voice input & output
Voice input & output settings
Voice search
Android keyboard
Speech
Voice recognizer
Voice Search
Settings for \'%s\'
Text-to-speech settings
Text-to-speech output
Always use my settings
Default settings below override application settings
Default settings
Default Engine
Sets the speech synthesis engine to be used for spoken text
Speech rate
Speed at which the text is spoken
Pitch
Affects the tone of the spoken text
Language
Sets the language-specific voice for the spoken text
Listen to an example
Play a short demonstration of speech synthesis
Install voice data
Install the voice data required for speech synthesis
Voices required for speech synthesis already properly installed
Your settings have changed. This is an example of how they sound.
The engine you selected is unable to run
Configure
Select another engine
This speech synthesis engine may be able to collect
all the text that will be spoken, including personal data like passwords and credit
card numbers. It comes from the %s engine.
Enable the use of this speech synthesis engine?
Engines
%s settings
%s is enabled
%s is disabled
Engine settings
Settings for %s
Languages and voices
Installed
Not installed
Female
Male
Speech synthesis engine installed
Enable new engine before use
Launch engine settings
Preferred engine
General
Power Control
Updating Wi-Fi setting
Updating Bluetooth setting
VPN
Credential storage
Install from storage
Install from SD card
Install certificates from storage
Install certificates from SD card
Clear credentials
Remove all certificates
Trusted credentials
Display trusted CA certificates
Enter password
Enter the password for credential storage.
Current password:
All the contents will be removed. Are you sure about that?
The password must have at least 8 characters.
Incorrect password.
Incorrect password. You have one more chance before credential storage is erased.
Incorrect password. You have %1$d more chances before credential storage is erased.
Credential storage is erased.
Credential storage could not be erased.
Credential storage is enabled.
You must set a lock screen PIN or password before you can use credential storage. Would you like to do that now?
Emergency tone
Set behavior when an emergency call is placed
Backup & reset
Backup & reset
Backup and restore
Personal data
Back up my data
Back up application data, Wi-Fi passwords, and other settings to Google servers
Backup account
No account is currently storing backed up data
Automatic restore
If I reinstall an application, restore backed up settings or other data
Desktop backup password
Desktop full backups are not currently protected.
Select to change or remove the password for desktop full backups
Backup
Are you sure you want to stop backing up your Wi-Fi passwords, bookmarks, and other settings and application data and erase all copies on Google servers?
Device administration settings
Device administrator
Deactivate
Device administrators
No available device administrators
Activate device administrator?
Activate
Device administrator
Activating this administrator will allow
the application %1$s to perform the
following operations:
This administrator is active and allows
the application %1$s to perform the
following operations:
Untitled
General
Ringtone & notifications
Notifications
System
Wi-Fi setup
Connect to Wi-Fi network %s
Connecting to Wi-Fi network %s...
Connected to Wi-Fi network %s
Add a network
Not connected
Add network
Refresh list
Skip
Next
Back
Network details
Connect
Forget
Save
Cancel
Scanning networks...
Touch a network to connect to it
Connect to existing network
Connect to unsecured network
Enter network configuration
Connect to new network
Connecting...
Proceed to the next step
EAP not supported
You can\u0027t configure an EAP Wi-Fi connection during setup. After setup, you can do that in Settings, under Wireless & networks.
Connecting can take a few minutes...
Touch Next to continue with setup.\n\nTouch Back to connect to a different Wi-Fi network.
Select Time Zone
Sync enabled
Sync disabled
Sync error.
Sync settings
Sync is currently experiencing problems. It will be back shortly.
Add account
Background data
Applications can sync, send, and receive data at any time
Attention
Disabling background data extends battery life and lowers data use. Some applications may still use the background data connection.
Auto-sync app data
Sync is ON
Sync is OFF
Sync error
Back up settings
Back up my settings
Sync now
Cancel sync
Touch to sync now\n%1$s
Gmail
Calendar
Contacts
Welcome to Google sync!
\nA Google approach to synchronizing data to allow access to your contacts, appointments, and more from wherever you are.
Application sync settings
Data & synchronization
Change password
Account settings
Remove account
Add an account
Finish
Remove account
Do you really want to remove this account? Removing it will also delete all of its messages, contacts, and other data from the tablet.
\nProceed?
Do you really want to remove this account? Removing it will also delete all of its messages, contacts, and other data from the phone.
\nProceed?
This account is required by some applications. You can only remove it by resetting the tablet to factory defaults (which deletes all your personal data). You do that in the Settings application, under Privacy.
This account is required by some applications. You can only remove it by resetting the phone to factory defaults (which deletes all your personal data). You do that in the Settings application, under Privacy.
Push subscriptions
Sync %s
Cannot manually sync
Sync for this item is currently disabled. To change your preference, temporarily turn on background data and automatic sync.
Enter password to decrypt storage
Sorry, try again
Service busy, try again
Delete
Misc Files
selected %1$d out of %2$d
%1$s out of %2$s
Select All
HDCP checking
Set HDCP checking behavior
User interface
Strict mode enabled
Flash screen when apps do long operations
on main thread
Pointer location
Screen overlay showing current touch data
Show touches
Show visual feedback for touches
Show screen updates
Flash areas of screen when they update
Show CPU usage
Screen overlay showing current CPU usage
Window animation scale
Transition animation scale
Applications
Don\'t keep activities
Destroy every activity as soon as
the user leaves it
Background process limit
Show all ANRs
Show Application Not Responding dialog
for background apps
Data usage
Data usage cycle
Data roaming
Restrict background data
Separate 4G usage
Show Wi-Fi usage
Show Ethernet usage
Change cycle\u2026
Day of month to reset data usage cycle:
No applications used data during this period.
Foreground
Background
Disable mobile data?
Set mobile data limit
Set 4G data limit
Set 2G-3G data limit
Set Wi-Fi data limit
Wi-Fi
Ethernet
Mobile
4G
2G-3G
mobile
none
Mobile data
2G-3G data
4G data
View application settings
Restrict background data
Disable background data on mobile data network only. Wi-Fi will be used if available.
To restrict background data for this app, first set a mobile data limit.
Restrict background data?
This feature may cause an app that depends on background data to stop working when Wi-Fi isn\'t available.\n\nMore appropriate data usage controls may be found in the settings available from within the app.
Restricting background data is possible only when you\'ve set a mobile data limit.
Usage cycle reset date
Date of each month:
Set
Set data usage warning
Set data usage limit
Limiting data usage
Your %1$s data connection will be disabled when the specified limit is reached.\n\nTo avoid overage charges, consider using a reduced limit, as device and carrier accounting methods may vary.
Restrict background data?
If you restrict background mobile data, some apps and services won\'t work unless Wi-Fi is available.
^1 ^2\nwarning
^1 ^2\nlimit
Removed apps
%1$s received, %2$s sent
%2$s: %1$s used
Emergency call
Return to call
Name
Type
Server address
PPP encryption (MPPE)
L2TP secret
IPSec identifier
IPSec pre-shared key
IPSec user certificate
IPSec CA certificate
Show advanced options
DNS search domains
DNS servers (e.g. 8.8.8.8)
Forwarding routes (e.g. 10.0.0.0/8)
Username
Password
Save account information
(not used)
(do not verify server)
Cancel
Save
Connect
Edit VPN network
Connect to %s
VPN
Add VPN network
Edit network
Delete network
System
User
Disable
Enable
Remove
Enable the system CA certificate?
Disable the system CA certificate?
Permanently remove the user CA certificate?
Accessibility tutorial
Next
Back
Finish
Skip tutorial
Lesson 1: Exploring the screen
After you turn on \"Explore by touch,\" you can touch the screen to learn what’s under your finger. For example, the current screen contains application icons. Find one of them by touching the screen and sliding your finger around.
Good. Keep sliding your finger around the screen until you find at least one more icon.
To activate something that you’re touching, tap it. Slide your finger until you find the icon for the %s. Then tap the icon once to activate it.
Your finger is touching the %s icon. Tap once to activate the icon.
Your finger moved over the %s icon, and then moved away. Slowly slide your finger around the screen until you find the Browser icon again.
Good. To move to the next lesson, find and activate the "%s button," located near the bottom-right corner of the screen.
Lesson 2: Scrolling using two fingers
To scroll through a list, you can slide two fingers along the screen. For example, the current screen contains a list of application names that can scroll up or down. First, try to identify a few items in the list by sliding one finger around.
Good. Keep sliding your finger around to find at least one more item.
Now place two fingers on an item in the list and slide both fingers up. If you reach the top of the screen, lift your fingers, place them lower on the list, and continue sliding up.
Good. Keep sliding your fingers up to scroll some more.
You have completed the tutorial. To exit, find and tap the %s button.
Spelling correction
Enter your current full backup password here
Enter a new password for full backups here
Please re-enter your new full backup password here
Set backup password
Cancel
%d%%