"Yes" "No" "Create" "Unknown" "You are now %1$d steps away from being a developer." "You are now a developer!" "No need, you are already a developer." "WIRELESS & NETWORKS" "DEVICE" "PERSONAL" "SYSTEM" "Turn on radio" "Turn off radio" "Turn on SMS over IMS" "Turn off SMS over IMS" "Turn on IMS registration required" "Turn off IMS registration required" "Turn on lte ram dump" "Turn off lte ram dump" "View SIM address book" "View Fixed Dialling Numbers" "View Service Dialling Numbers" "Get PDP list" "In service" "Out of service" "Emergency calls only" "Radio off" "Roaming" "Not roaming" "Idle" "Ringing" "Call in progress" "Disconnected" "Connecting" "Connected" "Suspended" "unknown" "pkts" "bytes" "dBm" "asu" "LAC" "CID" "Unmount USB storage" "Unmount SD card" "Erase USB storage" "Erase SD card" "Small" "Medium" "Large" "OK" "USB storage" "SD card" "Battery status:" "Power plug:" "Battery scale:" "Battery level:" "Battery health:" "Battery technology:" "Battery voltage:" "mV" "Battery temperature:" "° C" "Time since boot:" "Awake time on battery:" "Awake time when charging:" "Screen ON time:" "Unknown" "Charging" "(AC)" "(USB)" "(wireless)" "Not charging" "Not charging" "Full" "Unplugged" "AC" "USB" "wireless" "AC+USB" "Unknown" "Unknown" "Good" "Overheat" "Dead" "Over voltage" "Unknown error" "Cold" "Bluetooth" "Discoverable" "Visible to all Bluetooth devices nearby (%1$s)" "Visible to all Bluetooth devices nearby" "Not visible to other Bluetooth devices" "Only visible to paired devices" "Make device discoverable" "Visibility timeout" "Set how long device will be discoverable" "Lock voice dialling" "Prevent use of the Bluetooth dialler when the screen is locked" "Bluetooth devices" "Device name" "Device settings" "Profile settings" "No name set, using account name" "Scan for devices" "Rename tablet" "Rename phone" "Rename" "Disconnect?" "This will end your connection with:<br><b>%1$s</b>" "Disable profile?" "This will disable:<br><b>%1$s</b><br><br>From:<br><b>%2$s</b>" "Connected" "Connected (no phone)" "Connected (no media)" "Connected (no phone or media)" "Disconnected" "Disconnecting…" "Connecting…" "Pairing…" "Unnamed Bluetooth device" "Searching" "No nearby Bluetooth devices were found." "Bluetooth pairing request" "Pairing request" "Touch to pair with %1$s." "Show files received" "Bluetooth device chooser" "Bluetooth permission request" "An app wants to turn on Bluetooth. Allow?" "An app on your tablet wants to make your tablet discoverable by other Bluetooth devices for %1$d seconds. Allow?" "An app on your phone wants to make your phone discoverable by other Bluetooth devices for %1$d seconds. Allow?" "An app on your tablet wants to make your tablet “always discoverable” by other Bluetooth devices. Allow?" "An app on your phone wants to make your phone “always discoverable” by other Bluetooth devices. Allow?" "An app on your tablet wants to turn on Bluetooth and make your tablet discoverable by other devices for %1$d seconds. Allow?" "An app on your phone wants to turn on Bluetooth and make your phone discoverable by other devices for %1$d seconds. Allow?" "An app on your tablet wants to turn on Bluetooth and make your tablet discoverable by other devices. Allow?" "An app on your phone wants to turn on Bluetooth and make your phone discoverable by other devices. Allow?" "Turning on Bluetooth…" "Turning Bluetooth off…" "Auto-connect" "Bluetooth connection request" "Touch to connect to \"%1$s\"." "Do you want to connect to \"%1$s\"?" "Phone book request" "%1$s wants to access your contacts and call history. Give access to %2$s?" "Don\'t ask again" "Date & time settings" "Choose time zone" "Regional (%s)" "Preview:" "Font size:" "Send broadcast" "Action:" "Start activity" "Resource:" "Account:" "Proxy settings" "Clear" "Proxy port" "Bypass proxy for" "example.com,mycomp.test.com,localhost" "Restore defaults" "Done" "Proxy hostname" "proxy.example.com" "Attention" "OK" "The hostname that you typed isn\'t valid." "The exclusion list that you\'ve typed isn\'t properly formatted. Type a comma-separated list of excluded domains." "You need to complete the port field." "The port field must be empty if the host field is empty." "The port that you typed is not valid." "The HTTP proxy is used by the browser but may not be used by the other apps." "Location:" "Neighbouring CID:" "CellInfo:" "Data attempts:" "GPRS service:" "Roaming:" "IMEI:" "Call redirect:" "Number of PPP reset since boot:" "GSM disconnects:" "Current network:" "Data successes:" "PPP received:" "GSM service:" "Signal strength:" "Call status:" "PPP sent:" "Radio resets:" "Message waiting:" "Phone number:" "Select radio band" "Network type:" "Set preferred network type:" "Ping IpAddr:" "Ping Host Name (www.google.co.uk):" "HTTP Client test:" "Run ping test" "SMSC:" "Update" "Refresh" "Toggle DNS check" "OEM-specific Info/Settings" "Set GSM/UMTS band" "Loading band list…" "Set" "Unsuccessful" "Successful" "Changes take effect when the USB cable is reconnected." "Enable USB mass storage" "Total bytes:" "USB storage not mounted." "No SD card." "Available bytes:" "USB storage is being used as a mass storage device." "SD card is being used as a mass storage device." "It is now safe to remove the USB storage." "It is now safe to remove the SD card." "USB storage was removed while still in use!" "SD card was removed while still in use!" "Used bytes:" "Scanning USB storage for media…" "Scanning SD card for media…" "USB storage mounted read-only." "SD card mounted read-only." "Skip" "Next" "Language" "Choose activity" "Device info" "Battery info" "Screen" "Tablet info" "Phone info" "USB storage" "SD card" "Proxy settings" "Cancel" "Settings" "Settings" "Settings shortcut" "Aeroplane mode" "More…" "Wireless & networks" "Manage Wi-Fi, Bluetooth, aeroplane mode, mobile networks & VPNs" "Data roaming" "Connect to data services when roaming" "Connect to data services when roaming" "You have lost data connectivity because you left your home network with data roaming turned off." "Turn it on" "When you allow data roaming, you may incur significant roaming charges!" "When you allow data roaming, you may incur significant roaming charges!"\n\n"This setting affects all users on this tablet." "When you allow data roaming, you may incur significant roaming charges!"\n\n"This setting affects all users on this phone." "Allow data roaming?" "Operator selection" "Choose a network operator" "Date & time" "Set date and time" "Set date, time, time zone, & formats" "Automatic date & time" "Use network-provided time" "Use network-provided time" "Automatic time zone" "Use network-provided time zone" "Use network-provided time zone" "Use 24-hour format" "Set time" "Select time zone" "Set date" "Choose date format" "Sort alphabetically" "Sort by time zone" "Date" "Time" "Improve face matching" "Liveness check" "Require eye blink while unlocking" "Automatically lock" "%1$s after sleep" "Show owner info on lock screen" "Owner info" "Type text to display on the lock screen" "Show user info on lock screen" "User info" "Location access" "Security" "Set My Location, screen unlock, SIM card lock, credential storage lock" "Set My Location, screen unlock, credential storage lock" "Passwords" "Encryption" "Encrypt tablet" "Encrypt phone" "Require a numerical PIN or password to decrypt your tablet each time that you turn it on" "Require a numerical PIN or password to decrypt your phone each time that you turn it on" "Encrypted" "You can encrypt your accounts, settings, downloaded apps and their data, media and other files. Once you encrypt your tablet, you need to type a numeric PIN or password to decrypt it each time you switch it on. You can only decrypt your tablet by performing a factory data reset, erasing all your data."\n\n"Encryption takes an hour or more. You must start with a charged battery and keep your tablet plugged in until encryption is complete. If you interrupt the encryption process, you will lose some or all of your data." "You can encrypt your accounts, settings, downloaded apps and their data, media and other files. Once you encrypt your phone, you need to type a numeric PIN or password to decrypt it each time you switch it on. You can\'t decrypt your phone except by performing a factory data reset, erasing all your data."\n\n"Encryption takes an hour or more. You must start with a charged battery and keep your phone plugged in until encryption is complete. If you interrupt the encryption process, you will lose some or all of your data." "Encrypt tablet" "Encrypt phone" "Please charge your battery and try again." "Please plug in your charger and try again." "No lock-screen PIN or password" "You need to set a lock screen PIN or password before you can start encryption." "Encrypt?" "The encryption operation is irreversible and if you interrupt it, you\'ll lose data. Encryption takes an hour or more, during which the tablet will restart several times." "The encryption operation is irreversible and if you interrupt it, you\'ll lose data. Encryption takes an hour or more, during which the phone will restart several times." "Encrypting" "Wait while your tablet is being encrypted. ^1% complete." "Wait while your phone is being encrypted. ^1% complete." "Try again in ^1 seconds." "Type your password" "Encryption unsuccessful" "Encryption was interrupted and can\'t be completed. As a result, the data on your tablet is no longer accessible. "\n\n" To resume using your tablet, you need to perform a factory reset. When you set up your tablet after the reset, you\'ll have an opportunity to restore any data that was backed up to your Google Account." "Encryption was interrupted and can\'t be completed. As a result, the data on your phone is no longer accessible. "\n\n"To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you\'ll have an opportunity to restore any data that was backed up to your Google Account." "Switch input method" "Choose screen lock" "Choose backup lock" "Screen lock" "Status widget" "Other widget" "None" "Clock" "Change lock screen" "Change or disable pattern, PIN or password security" "Choose a method to lock the screen" "When Face Unlock can\'t see you, how do you want to unlock?" "None" "Slide" "No security" "Face Unlock" "Low security, experimental" "Pattern" "Medium security" "PIN" "Medium to high security" "Password" "High security" "Disabled by administrator, encryption policy or credential storage" "None" "Slide" "Face Unlock" "Pattern" "PIN" "Password" "Turn off screen lock" "Remove unlock pattern" "Remove unlock PIN" "Remove unlock password" "Change unlock pattern" "Change unlock PIN" "Change unlock password" "Password must be at least %d characters" "PIN must be at least %d characters" "Touch Continue when finished" "Continue" "Password must be fewer than %d characters." "PIN must be fewer than %d digits." "PIN must contain only digits 0-9." "The device administrator doesn\'t allow using a recent PIN." "Password contains an illegal character." "Password must contain at least one letter." "Password must contain at least one digit." "Password must contain at least one symbol." "Password must contain at least 1 letter." "Password must contain at least %d letters." "Password must contain at least 1 lower-case letter." "Password must contain at least %d lower-case letters." "Password must contain at least 1 upper-case letter." "Password must contain at least %d upper-case letters." "Password must contain at least 1 numerical digit." "Password must contain at least %d numerical digits." "Password must contain at least 1 special symbol." "Password must contain at least %d special symbols." "Password must contain at least 1 non-letter character." "Password must contain at least %d non-letter characters." "The device administrator doesn\'t allow using a recent password." "OK" "Cancel" "Cancel" "Next" "Set up is complete." "Device administration" "Device administrators" "View or deactivate device administrators" "Bluetooth" "Turn on Bluetooth" "Bluetooth" "Bluetooth" "Manage connections, set device name & discoverability" "Bluetooth pairing request" "To pair with:<br><b>%1$s</b><br><br>Type the device\'s required PIN:" "To pair with:<br><b>%1$s</b><br><br>Type the device\'s required passkey:" "PIN contains letters or symbols" "Usually 0000 or 1234" "You may also need to type this PIN on the other device." "You may also need to type this passkey on the other device." "To pair with:<br><b>%1$s</b><br><br>Make sure that it is showing this passkey:<br><b>%2$s</b>" "From:<br><b>%1$s</b><br><br>Pair with this device?" "To pair with:<br><b>%1$s</b><br><br>Type on it:<br><b>%2$s</b>, then press Return or Enter." "Pair" "Cancel" "Couldn\'t pair with %1$s." "Couldn\'t pair with %1$s because of an incorrect PIN or passkey." "Can\'t communicate with %1$s." "Pairing rejected by %1$s." "Couldn\'t connect to %1$s." "Scan for devices" "Search for devices" "Searching…" "Device settings" "Paired devices" "Available devices" "Connect" "Disconnect" "Pair & connect" "Unpair" "Disconnect & unpair" "Options…" "Advanced" "Advanced Bluetooth" "To see devices, turn Bluetooth on." "Connect to…" "Media audio" "Phone audio" "File transfer" "Input device" "Internet access" "Internet connection sharing" "%1$s will be disconnected from media audio." "%1$s will be disconnected from hands-free audio." "%1$s will be disconnected from input device." "Internet access via %1$s will be disconnected." "%1$s will be disconnected from sharing this tablet\'s Internet connection." "%1$s will be disconnected from sharing this phone\'s Internet connection." "Paired Bluetooth device" "Connect" "Connect to Bluetooth device" "Profiles" "Rename" "Allow incoming file transfers" "Connected to media audio" "Connected to phone audio" "Connected to file-transfer server" "Not connected to file-transfer server" "Connected to input device" "Connected to device for Internet access" "Sharing local Internet connection with device" "Use for media audio" "Use for phone audio" "Use for file transfer" "Use for input" "Use for Internet access" "Dock Settings" "Use dock for audio" "As speaker phone" "For music and media" "Remember settings" "Wireless display" "To see devices, turn wireless display on." "Wireless display is disabled because Wi-FI is off." "Search for displays" "Searching…" "No nearby wireless displays were found." "Paired displays" "Available devices" "Connecting" "Connected" "Available" "Display settings" "Disconnect?" "This will end your connection with:<br><b>%1$s</b>" "Wireless display options" "Forget" "Finished" "Name" "On" "Off" "Disabled" "NFC" "Allow data exchange when the tablet touches another device" "Allow data exchange when the phone touches another device" "Android Beam" "Ready to transmit app content via NFC" "Off" "Unavailable because NFC is turned off" "Android Beam" "When this feature is turned on, you can beam app content to another NFC-capable device by holding the devices close together. For example, you can beam Browser pages, YouTube videos, People contacts and more."\n\n"Just bring the devices together (typically back to back) and then touch your screen. The app determines what gets beamed." "Network service discovery" "Allow apps on other devices to discover apps on this device" "WiFi" "Turn on Wi-Fi" "Wi-Fi" "Wi-Fi settings" "Wi-Fi" "Set up & manage wireless access points" "Select Wi-Fi" "Turning on Wi-Fi…" "Turning off Wi-Fi…" "Error" "In aeroplane mode" "Can\'t scan for networks" "Network notification" "Notify me when an open network is available" "Avoid poor connections" "Don\'t use a WiFi network unless it has a good Internet connection" "Keep Wi-Fi on during sleep" "There was a problem while changing the setting" "Wi-FI optimisation" "Minimise battery usage when Wi-FI is on" "Add network" "Wi-Fi networks" "WPS Push Button" "More options" "WPS Pin Entry" "Wi-Fi Direct" "Scan" "Advanced" "Connect to network" "Forget network" "Modify network" "To see networks available, turn Wi-Fi on." "Searching for WiFi networks..." "Other network…" "More" "Automatic setup (WPS)" "Show advanced options" "Wi-Fi Protected Setup" "Starting WPS…" "Press the WiFi Protected Setup button on your router. It may be called \"WPS\" or contain this symbol:" "Enter pin %1$s on your Wi-Fi router. The setup may take up to two minutes to complete." "WPS succeeded. Connecting to the network…" "Connected to the Wi-Fi network %s" "WPS is already in progress and can take up to two minutes to complete" "Request failed. Please try again in a few minutes." "The wireless router security setting (WEP) is not supported" "The wireless router security setting (TKIP) is not supported" "Authentication failure. Please try again." "Another WPS session was detected. Please try again in a few minutes." "Network SSID" "Security" "Signal strength" "Status" "Link speed" "IP address" "EAP method" "Phase-2 authentication" "CA certificate" "User certificate" "Identity" "Anonymous identity" "Password" "Show password" "IP settings" "(unchanged)" "(unspecified)" "Saved" "Disabled" "Avoided poor Internet connection" "Authentication problem" "Not in range" "WPS available" " (WPS available)" "Secured with %1$s" ", secured with %1$s" "None" "Connect" "Failed to connect to network" "Forget" "Failed to forget network" "Save" "Failed to save network" "Cancel" "Skip anyway" "Don\'t skip" "WARNING: You may incur extra carrier data charges."\n\n"Tablet setup can require significant network activity." "WARNING: You may incur extra carrier data charges."\n\n"Phone setup can require significant network activity." "WARNING: The tablet won\'t be able to verify that your software is up to date." "WARNING: The phone won\'t be able to verify that your software is up to date." "The tablet was unable to connect to this Wi-Fi network." "The phone was unable to connect to this Wi-Fi network." "Advanced Wi-Fi" "Wi-Fi frequency band" "Specify the frequency range of operation" "There was a problem while setting the frequency band." "MAC address" "IP address" "IP settings" "Save" "Cancel" "Please type a valid IP address." "Please type a valid gateway address." "Type a valid DNS address." "Type a network prefix length between 0 and 32." "DNS 1" "DNS 2" "Gateway" "Network prefix length" "Wi-Fi Direct" "Device information" "Remember this connection" "Search for devices" "Searching…" "Rename device" "Peer devices" "Remembered groups" "Could not connect." "Failed to rename device." "Disconnect?" "If you disconnect, your connection with %1$s will end." "If you disconnect, your connection with %1$s and %2$s other devices will end." "Cancel invitation" "Do you want to cancel invitation to connect with %1$s?" "Forget this group?" "Portable Wi-Fi hotspot" "Turning hotspot on…" "Turning off hotspot…" "Portable hotspot %1$s active" "Portable Wi-Fi hotspot error" "Set up Wi-Fi hotspot" "%1$s %2$s portable Wi-Fi hotspot" "Android Hotspot" "Display" "Sound" "Phone ringtone" "Volumes" "Music effects" "Ringer volume" "Vibrate when silent" "Default notification" "Pulse notification light" "Ringtone" "Notification" "Use incoming call volume for notifications" "Choose notification ringtone" "Media" "Set volume for music and videos" "Alarm" "Audio settings for the attached dock" "Dial-pad touch tones" "Touch sounds" "Screen lock sounds" "Vibrate on touch" "Noise cancellation" "Music, video, games & other media" "Ringtone & notifications" "Notifications" "Alarms" "Mute ringtone & notifications" "Mute music & other media" "Mute notifications" "Mute alarms" "Vibrate when ringing" "Dock" "Dock settings" "Audio" "Settings for the attached desktop dock" "Settings for the attached car dock" "Tablet not docked" "Phone not docked" "Settings for the attached dock" "Dock not found" "You need to dock the tablet before setting up dock audio." "You need to dock the phone before setting up dock audio." "Dock insertion sound" "Play sound when inserting or removing tablet from dock" "Play sound when inserting or removing phone from dock" "Don\'t play sound when inserting or removing tablet from dock" "Don\'t play sound when inserting or removing phone from dock" "Accounts" "Search" "Manage search settings and history" "Display" "Auto-rotate screen" "Switch orientation automatically when rotating tablet" "Switch orientation automatically when rotating phone" "Switch orientation automatically when rotating tablet" "Switch orientation automatically when rotating phone" "Brightness" "Adjust the brightness of the screen" "Sleep" "After %1$s of inactivity" "Wallpaper" "Choose wallpaper from" "Sleep Mode" "When docked or asleep and charging" "Either" "While charging" "While docked" "Off" "To control what happens when the phone is docked and/or sleeping, turn Sleep Mode on." "When to sleep" "Sleep now" "Settings" "Automatic brightness" "Font size" "Font size" "SIM card lock settings" "Set up SIM card lock" "SIM card lock" "Lock SIM card" "Require PIN to use tablet" "Require PIN to use phone" "Require PIN to use tablet" "Require PIN to use phone" "Change SIM PIN" "SIM PIN" "Lock SIM card" "Unlock SIM card" "Old SIM PIN" "New SIM PIN" "Retype new PIN" "SIM PIN" "Incorrect PIN" "PINs don\'t match" "Can\'t change PIN."\n"Possibly incorrect PIN." "SIM PIN changed successfully" "Can\'t change SIM card lock state."\n"Possibly incorrect PIN." "OK" "Cancel" "Tablet status" "Phone status" "System updates" "Android version" "Model number" "Equipment ID" "Baseband version" "Kernel version" "Build number" "SELinux status" "Not available" "Status" "Status" "Status of the battery, network and other information" "Phone number, signal, etc." "Storage" "Storage settings" "Unmount USB storage, view available storage" "Unmount SD card, view available storage" "MDN" "My phone number" "MIN" "MSID" "PRL version" "MEID" "ICCID" "Mobile network type" "Mobile network state" "Service status" "Signal strength" "Roaming" "Network" "Wi-Fi MAC address" "Bluetooth address" "Serial number" "Unavailable" "Uptime" "Awake time" "Internal storage" "USB storage" "SD card" "Available" "Available (read-only)" "Total space" "Calculating..." "Apps (app data & media content)" "Media" "Downloads" "Pictures, videos" "Audio (music, ringtones, podcasts, etc.)" "Misc." "Cached data" "Unmount shared storage" "Unmount SD card" "Unmount the internal USB storage" "Unmount the SD card so that you can remove it safely" "Insert USB storage for mounting" "Insert an SD card for mounting" "Mount USB storage" "Mount SD card" "Erase USB storage" "Erase SD card" "Erases all data on the internal USB storage, such as music and photos" "Erases all data on the SD card, such as music and photos" "Clear cached data?" "This will clear cached data for all apps." "MTP or PTP function is active" "Unmount USB storage" "Unmount SD card?" "If you unmount the USB storage, some apps that you are using will stop and may be unavailable until you remount the USB storage." "If you unmount the SD card, some apps that you are using will stop and may be unavailable until you remount the SD card." "Cannot unmount USB storage. Try again later." "Couldn\'t unmount SD card. Try again later." "USB storage will be unmounted." "SD card will be unmounted." "Unmounting" "Unmount in progress" "Storage space is running out" "Some system functions, such as syncing, may not work correctly. Try to free space by deleting or unpinning items, such as apps or media content." "USB computer connection" "USB computer connection" "Connect as" "Media device (MTP)" "Lets you transfer media files on Windows or using Android File Transfer on Mac (see www.android.com/filetransfer)" "Camera (PTP)" "Lets you transfer photos using camera software and transfer any files on computers that don\'t support MTP" "Install file-transfer tools" "Other users" "Battery status" "Battery level" "APNs" "Edit access point" "Not set" "Name" "APN" "Proxy" "Port" "Username" "Password" "Server" "MMSC" "MMS proxy" "MMS port" "MCC" "MNC" "Authentication type" "None" "PAP" "CHAP" "PAP or CHAP" "APN type" "APN protocol" "APN roaming protocol" "APN enable/disable" "APN enabled" "APN disabled" "Bearer" "Delete APN" "New APN" "Save" "Discard" "The Name field can\'t be empty." "The APN cannot be empty." "MCC field must be 3 digits." "MNC field must be 2 or 3 digits." "Restoring default APN settings." "Reset to default" "Reset default APN settings completed" "Factory data reset" "Erases all data on tablet" "Erases all data on phone" "This will erase all data from your tablet\'s ""internal storage"", including:"\n\n
  • "Your Google account"
  • \n
  • "System and app data and settings"
  • \n
  • "Downloaded apps"
  • "This will erase all data from your phone\'s ""internal storage"", including:"\n\n
  • "Your Google account"
  • \n
  • "System and app data and settings"
  • \n
  • "Downloaded apps"
  • \n\n"You are currently signed in to the following accounts:"\n
  • "Music"
  • \n
  • "Photos"
  • \n
  • "Other user data"
  • \n\n"To clear music, pictures and other user data, the ""USB storage"" needs to be erased." \n\n"To clear music, pictures and other user data, the ""SD card"" needs to be erased." "Erase USB storage" "Erase SD card" "Erase all the data on the internal USB storage, such as music or photos" "Erase all the data on the SD card, such as music or photos" "Reset tablet" "Reset phone" "Erase all your personal information and downloaded apps? You cannot reverse this action!" "Erase everything" "Draw your unlock pattern" "You need to draw your unlock pattern to confirm a factory data reset." "No reset was performed because the System Clear service isn\'t available." "Reset?" "Erase USB storage" "Erase SD card" "Erases all data in USB storage" "Erases all data on the SD card" "Erase all USB storage? You will lose ""all"" stored data!" "Erase the SD card? You will lose ""all"" data on the card!" "Erase USB storage" "Erase SD card" "Erase the USB storage, deleting all files stored there? You cannot reverse this action!" "Erase the SD card, deleting all files stored there? You cannot reverse this action!" "Erase everything" "Draw your unlock pattern" "You need to draw your unlock pattern to confirm that you want to erase the USB storage." "You need to draw your unlock pattern to confirm that you want to erase the SD card." "Call settings" "Set up voicemail, call forwarding, call waiting, caller ID" "USB tethering" "Portable hotspot" "Bluetooth tethering" "Tethering" "Tethering & portable hotspot" "USB" "USB tethering" "USB connected, tick to tether" "Tethered" "Can\'t tether when USB storage is in use" "USB not connected" "USB tethering error" "Bluetooth tethering" "Sharing this tablet\'s Internet connection" "Sharing this phone\'s Internet connection" "Sharing this tablet\'s Internet connection to 1 device" "Sharing this phone\'s Internet connection to 1 device" "Sharing this tablet\'s Internet connection to %1$d devices" "Sharing this phone\'s Internet connection to %1$d devices" "Not sharing this tablet\'s Internet connection" "Not sharing this phone\'s Internet connection" "Not tethered" "Can\'t tether to more than %1$d devices." "%1$s will be untethered." "Help" "Mobile networks" "My Location" "Wi-Fi & mobile network location" "Let apps use Google\'s location service to estimate your location faster. Anonymous location data will be collected and sent to Google." "Location determined by Wi-Fi" "GPS satellites" "Let apps use GPS on your tablet to pinpoint your location" "Let apps use GPS on your phone to pinpoint your location" "Use assisted GPS" "Use server to assist GPS (un-tick to reduce network usage)" "Use server to assist GPS (un-tick to improve GPS performance)" "Location & Google search" "Let Google use your location to improve search results and other services" "Access to my location" "Let apps that have asked your permission use your location information" "Location sources" "About tablet" "About phone" "View legal info, status, software version" "Legal information" "Contributors" "Regulatory information" "Copyright" "Licence" "Terms and conditions" "Open-source licences" "There is a problem loading the licences." "Loading…" "Safety information" "Safety information" "You don\'t have a data connection. To view this information now, go to %s from any computer connected to the Internet." "Loading…" "Choose your password" "Choose your pattern" "Choose your PIN" "Confirm your password" "Confirm your pattern" "Confirm your PIN" "Passwords don\'t match" "PINs don\'t match" "Unlock selection" "password has been set" "PIN has been set" "Pattern has been set" "Screen security" "Change unlock pattern" "Change unlock PIN" "Confirm saved pattern" "Try again:" "Draw an unlock pattern" "Press Menu for help." "Release finger when done." "Connect at least %d dots. Try again:" "Pattern recorded." "Draw pattern again to confirm:" "Your new unlock pattern:" "Confirm" "Redraw" "Retry" "Continue" "Unlock pattern" "Require pattern" "Must draw pattern to unlock screen" "Make pattern visible" "Vibrate on touch" "Power button instantly locks" "Set unlock pattern" "Change unlock pattern" "How to draw an unlock pattern" "Too many incorrect attempts!" "Try again in %d seconds." "Application is not installed on your phone." "Cancel" "Next" "Securing your tablet" "Securing your phone" "Protect your tablet from unauthorised use by creating a personal screen unlock pattern. Slide your finger to connect the dots in any order on the next screen. You need to connect at least four dots. "\n\n"Ready to start? Touch Next." "Protect your phone from unauthorised use by creating a personal screen unlock pattern. Slide your finger to connect at least four dots in any order on the next screen. "\n\n"Ready to start? Touch Next." "Manage apps" "Manage and remove installed apps" "Apps" "Manage apps, set up quick-launch shortcuts" "App settings" "Unknown sources" "Allow installation of apps from unknown sources" "Your tablet and personal data are more vulnerable to attack by apps from unknown sources. You agree that you are solely responsible for any damage to your tablet or loss of data that may result from using these apps." "Your phone and personal data are more vulnerable to attack by apps from unknown sources. You agree that you are solely responsible for any damage to your phone or loss of data that may result from using these apps." "Verify apps" "Disallow or warn before installation of apps that may cause harm" "Advanced settings" "Enable more settings options" "App info" "Storage" "Launch by default" "Defaults" "Screen compatibility" "Permissions" "Cache" "Clear cache" "Cache" "Controls" "Force stop" "Total" "App" "USB storage app" "Data" "USB storage data" "SD card" "Uninstall" "Uninstall for all users" "Install" "Disable" "Enable" "Clear data" "Uninstall updates" "You\'ve chosen to launch this app by default for some actions." "You\'ve chosen to allow this app to create widgets and access their data." "No defaults set." "Clear defaults" "This app may not be designed for your screen. You can control how it adjusts to your screen here." "Ask when launched" "Scale app" "Unknown" "Sort by name" "Sort by size" "Show running services" "Show cached processes" "Reset app preferences" "Reset app preferences?" "This will reset all preferences for:"\n\n" "
  • "Disabled apps"
  • \n" "
  • "Disabled app notifications"
  • \n" "
  • "Default applications for actions"
  • \n" "
  • "Background data restrictions for apps"
  • \n\n" You will not lose any app data."
    "Reset apps" "Manage space" "Filter" "Choose filter options" "All" "Downloaded" "Running" "USB storage" "On SD card" "Disabled" "Not installed" "No apps." "Internal storage" "USB storage" "SD card storage" "Recomputing size…" "Delete app data?" "All this app\'s data will be deleted permanently. This includes all files, settings, accounts, databases, etc." "OK" "Cancel" "The app wasn\'t found in the list of installed apps." "Couldn\'t clear app data." "Uninstall updates" "All updates to this Android system app will be uninstalled." "Clear data" "Couldn\'t clear data for app." "This app can access the following on your tablet:" "This app can access the following on your phone:" "This app can access the following on your tablet. In order to improve performance and reduce memory usage, some of these permissions are available to %1$s because it runs in the same process as %2$s:" "This app can access the following on your phone. In order to improve performance and reduce memory usage, some of these permissions are available to %1$s because it runs in the same process as %2$s:" "%1$s and %2$s" "%1$s and %2$s" "%1$s, %2$s" "%1$s, %2$s" "This app may charge you money:" "Send premium SMS" "Computing…" "Couldn\'t compute the package size." "You don\'t have any third-party apps installed." "Version %1$s" "Move" "Move to tablet" "Move to phone" "Move to USB storage" "Move to SD card" "Moving" "Not enough storage space." "App doesn\'t exist." "App is copy-protected." "Install location isn\'t valid." "System updates cannot be installed on external media." "Force stop?" "If you force stop an app, it may misbehave." "Couldn\'t move app. %1$s" "Preferred install location" "Change the preferred installation location for new applications." "Disable built-in app?" "If you disable a built-in app, other apps may misbehave." "Delete data and disable app?" "If you disable a built-in app, other apps may misbehave. Your data will also be deleted." "Turn off notifications" "If you turn off notifications for this app, you may miss important alerts and updates." "Storage use" "View storage used by apps" "Running services" "View and control currently running services" "Restarting" "Cached background process" "Nothing running." "Started by app." "%1$s free" "%1$s used" "RAM" "User: %1$s" "Removed user" "%1$d process and %2$d service" "%1$d process and %2$d services" "%1$d processes and %2$d service" "%1$d processes and %2$d services" "Running app" "Not active" "Services" "Processes" "Stop" "Settings" "This service was started by its app. Stopping it may cause the app to fail." "This app can\'t be stopped safely. If you stop it, you may lose some of your current work." "This is an old app process that is still running in case it\'s needed again. There is usually no reason to stop it." "%1$s: currently in use. Touch Settings to control it." "Main process in use." "Service %1$s is in use." "Provider %1$s is in use." "Stop system service?" "If you stop this service, some features of your tablet may stop working correctly until you turn it off and then on again." "If you stop this service, some features of your phone may stop working correctly until you turn it off and then on again." "Language & input" "Language & input" "Language settings" "Keyboard & input methods" "Language" "Auto-replace" "Correct mistyped words" "Auto-capitalisation" "Capitalise first letter in sentences" "Auto-punctuate" "Physical keyboard settings" "Press Space key twice to insert \".\"" "Make passwords visible" "This input method may be able to collect all the text that you type, including personal data like passwords and credit card numbers. It comes from the app %1$s. Use this input method?" "This spell checker may be able to collect all the text that you type, including personal data like passwords and credit card numbers. It comes from the app %1$s. Use this spell checker?" "Settings" "Language" "Failed to open settings for %1$s" "Mouse/track pad" "Pointer speed" "Game Controller" "Use vibrator" "Redirect vibrator to game controller when connected." "Choose keyboard layout" "Set up keyboard layouts" "To switch, press Control-Spacebar" "Default" "Keyboard layouts" "User dictionary" "Personal dictionary" "Personal dictionaries" "Add" "Add to dictionary" "Phrase" "More options" "Fewer options" "OK" "Word:" "Shortcut:" "Language:" "Edit word" "Edit" "Delete" "You do not have any words in the user dictionary. You can add a word by touching the Add ( + ) button." "For all languages" "More languages…" "Testing" "Tablet information" "Phone information" "Battery information" "Quick launch" "Set keyboard shortcuts to launch apps" "Assign app" "No shortcut" "Search + %1$s" "Clear" "Your shortcut for %1$s (%2$s) will be cleared." "OK" "Cancel" "Apps" "Short cuts" "Text input" "Input method" "Default" "Input method selector" "Automatic" "Always show" "Always hide" "Set up input methods" "Settings" "Settings" "Active input methods" "Use system language" "%1$s Settings" "Choose active input methods" "On-screen keyboard settings" "Physical keyboard" "Physical keyboard settings" "Developer options" "Set options for app development" "USB debugging" "Debug mode when USB is connected" "Power menu bug reports" "Include option in power menu for taking a bug report" "Stay awake" "Screen will never sleep while charging" "Allow mock locations" "Allow mock locations" "Allow USB debugging?" "USB debugging is intended for development purposes only. Use it to copy data between your computer and your device, install apps on your device without notification and read log data." "Allow development settings?" "These settings are intended for development use only. They can cause your device and the applications on it to break or misbehave." "Verify apps over USB" "Check apps installed via ADB/ADT for harmful behaviour." "Protect USB storage" "Apps must request permission to read USB storage" "Protect USB storage?" "When USB storage is protected, apps must request permission to read data from external storage."\n\n"Some apps may not work until updated by their developers." "Protect SD card" "Apps must request permission to read SD card" "Protect SD card?" "When SD card is protected, apps must request permission to read data from external storage."\n\n"Some apps may not work until updated by their developers." "Choose gadget" "Choose widget" "Create widget and allow access?" "After you create the widget, %1$s can access all the data that it displays." "Always allow %1$s to create widgets and access their data" "%1$dd %2$dh %3$dm %4$ds" "%1$dh %2$dm %3$ds" "%1$dm %2$ds" "%1$ds" "Usage statistics" "Usage statistics" "Sort by:" "App" "Count" "Usage time" "Accessibility" "Accessibility settings" "Services" "System" "Magnification gestures" "When this feature is turned on, you can zoom in and out by triple-tapping the screen."\n\n"While zoomed in, you can:"\n
    • "Pan: Drag two or more fingers across the screen."
    • \n
    • "Adjust zoom level: Pinch two or more fingers together or spread them apart."
    \n\n"You can also temporarily magnify what\'s under your finger by triple-tapping and holding. In this magnified state, you can drag your finger to explore different parts of the screen. Lift your finger to return to your previous state."\n\n"Note: Triple-tap for magnification works everywhere except the keyboard and navigation bar."
    "Accessibility shortcut" "On" "Off" "When this feature is turned on, you can quickly enable accessibility features in two steps:"\n\n"Step 1: Press and hold the power button until you hear a sound or feel a vibration."\n\n"Step 2: Touch and hold two fingers until you hear audio confirmation."\n\n"If the device has multiple users, using this shortcut on the lock screen temporarily enables accessibility until the device is unlocked." "Large text" "Screen magnification" "Auto update screen magnification" "Update screen magnification on app transitions" "Power button ends call" "Speak passwords" "Touch & hold delay" "Enhance web accessibility" "Settings" "On" "Off" "Allowed" "Not allowed" "Allow" "Don\'t allow" "Use %1$s?" "%1$s can collect all of the text that you type, except passwords. This includes personal data, such as credit card numbers. It can also collect data about your interactions with the tablet." "%1$s can collect all of the text that you type, except passwords. This includes personal data, such as credit card numbers. It can also collect data about your interactions with the phone." "Stop %1$s?" "Touching OK will stop %1$s." "No services installed" "Need a screen reader?" "TalkBack provides spoken feedback to help blind and low-vision users. Do you want to install it for free from Android Market?" "Do you want apps to install scripts from Google that make their web content more accessible?" "No description provided." "Settings" "Battery" "What has been using the battery" "Battery usage data isn\'t available." "%1$s - %2$s" "Battery use since unplugged" "Battery use since reset" "%1$s on battery" "%1$s since unplugged" "Charging" "Screen ON" "GPS on" "Wi-Fi" "Awake" "Mobile network signal" "Device awake time" "Wi-Fi-on time" "Wi-Fi-on time" "%1$s - %2$s%%" "History details" "Use details" "Use details" "Adjust power use" "Included packages" "Screen" "WiFi" "Bluetooth" "Mobile standby" "Voice calls" "Tablet idle" "Phone idle" "CPU total" "CPU foreground" "Keep awake" "GPS" "Wi-Fi running" "Tablet" "Phone" "Data sent" "Data received" "Audio" "Video" "Time on" "Time without a signal" "Force stop" "App info" "App settings" "Screen settings" "Wi-Fi settings" "Bluetooth settings" "Battery used by voice calls" "Battery used when tablet is idle" "Battery used when phone is idle" "Battery used by mobile radio" "Switch to aeroplane mode to save power in areas with no mobile coverage" "Battery used by the display and backlight" "Reduce the screen brightness and/or screen timeout" "Battery used by WiFi" "Turn off Wi-Fi when not using it or when it isn\'t available" "Battery used by Bluetooth" "Turn off Bluetooth when you aren\'t using it" "Try connecting to a different Bluetooth device" "Battery used by app" "Stop or uninstall the app" "Manually control GPS to prevent app from using it" "The application may offer settings to reduce battery use" "Battery used by user" "%1$s since unplugged" "While last for unplugged for %1$s" "Usage totals" "Refresh" "Android OS" "Media server" "Voice input & output" "Voice input & output settings" "Voice search" "Android keyboard" "Speech" "Voice recogniser" "Voice Search" "Settings for \'%s\'" "Text-to-speech settings" "Text-to-speech output" "Always use my settings" "Default settings below override app settings" "default settings" "Default engine" "Sets the speech synthesis engine to be used for spoken text" "Speech rate" "Speed at which the text is spoken" "Pitch" "Affects the tone of the spoken text" "Language" "Sets the language-specific voice for the spoken text" "Listen to an example" "Play a short demonstration of speech synthesis" "Install voice data" "Install the voice data required for speech synthesis" "Voices required for speech synthesis already properly installed" "Your settings have changed. This is an example of how they sound." "The engine you have chosen can\'t run." "Configure" "Choose another engine" "This speech synthesis engine may be able to collect all the text that will be spoken, including personal data like passwords and credit card numbers. It comes from the %s engine. Enable the use of this speech synthesis engine?" "Engines" "%s Settings" "%s is enabled" "%s is disabled" "Engine settings" "Settings for %s" "Languages and voices" "Installed" "Not installed" "Female" "Male" "Speech synthesis engine installed" "Enable a new engine before use." "Launch engine settings" "Preferred engine" "General" "Power control" "Updating WiFi setting" "Updating Bluetooth setting" "%1$s %2$s" "on" "off" "turning on" "turning off" "Wi-Fi" "Bluetooth" "GPS" "Sync" "Brightness %1$s" "auto" "full" "half" "off" "VPN" "Credential storage" "Install from storage" "Install from SD card" "Install certificates from storage" "Install certificates from SD card" "Clear credentials" "Remove all certificates" "Trusted credentials" "Display trusted CA certificates" "Draw your unlock pattern" "You need to draw your unlock pattern to confirm credential installation." "Type the password for credential storage." "Current password:" "Remove all the contents?" "The password must contain at least 8 characters." "Incorrect password." "Incorrect password. You have one more chance before credential storage is erased." "Incorrect password. You have %1$d more chances before credential storage is erased." "Credential storage has been erased." "Credential storage couldn\'t be erased." "Credential storage is enabled." "You need to set a lock screen PIN or password before you can use credential storage." "Emergency tone" "Set behaviour when an emergency call is placed" "Backup & reset" "Backup & reset" "Backup & restore" "personal data" "Back up my data" "Back up application data, Wi-Fi passwords and other settings to Google servers" "Backup account" "No account is currently storing backed up data" "Automatic restore" "When reinstalling an app, restore backed up settings and data" "Desktop backup password" "Desktop full backups aren\'t currently protected" "Touch to change or remove the password for desktop full backups" "New backup password set" "New password and confirmation don\'t match" "Failure setting backup password" "Stop backing up your Wi-Fi passwords, bookmarks, other settings and app data, plus erase all copies on Google servers?" "Device administration settings" "Device administrator" "Deactivate" "Device administrators" "No available device administrators" "Activate device administrator?" "Activate" "Device administrator" "Activating this administrator will allow the app %1$s to perform the following operations:" "This administrator is active and allows the app %1$s to perform the following operations:" "Untitled" "General" "Notifications" "Call ringtone & vibrate" "System" "Wi-Fi setup" "Connect to Wi-Fi network %s" "Connecting to Wi-Fi network %s…" "Connected to Wi-Fi network %s" "Add a network" "Not connected" "Add network" "Refresh list" "Skip" "Next" "Back" "Network details" "Connect" "Forget" "Save" "Cancel" "Scanning networks..." "Touch a network to connect to it" "Connect to existing network" "Connect to unsecured network" "Type network configuration" "Connect to new network" "Connecting…" "Go to the next step" "EAP isn\'t supported." "You can\'t configure an EAP Wi-Fi connection during setup. After setup, you can do that in Settings > Wireless & networks." "Connecting can take a few minutes..." "Touch ""Next"" to continue with setup."\n\n"Touch ""Back"" to connect to a different Wi-Fi network." "Sync enabled" "Sync disabled" "Sync error..." "Sync failed" "Sync active" "Sync" "Sync is currently experiencing problems. It will be back shortly." "Add account" "Background data" "Apps can sync, send and receive data at any time" "Disable background data?" "Disabling background data extends battery life and lowers data use. Some apps may still use the background data connection." "Auto-sync app data" "Sync is ON" "Sync is OFF" "Sync error" "Last synced %1$s" "Syncing now…" "Back up settings" "Back up my settings" "Sync now" "Cancel sync" "Touch to sync now %1$s" "Gmail" "Calendar" "Contacts" "Welcome to Google sync!"" "\n"A Google approach to syncing data to allow access to your contacts, appointments and more from wherever you are." "App sync settings" "Data & synchronisation" "Change password" "Account settings" "Remove account" "Add an account" "Finish" "Remove account?" "Removing this account will delete all of its messages, contacts and other data from the tablet!" "Removing this account will delete all of its messages, contacts and other data from the phone!" "This account is required by some apps. You can only remove it by resetting the tablet to factory defaults (which deletes all your personal data) in Settings > Backup & reset." "This account is required by some apps. You can only remove it by resetting the phone to factory defaults (which deletes all of your personal data) in Settings > Backup & reset." "Push subscriptions" "Cannot sync manually" "Sync for this item is currently disabled. To change your preference, temporarily turn on background data and automatic sync." "4G settings" "Set up & manage 4G network and modem" "4G MAC address" "Type password to decrypt storage" "Try again." "Delete" "Misc. files" "selected %1$d out of %2$d" "%1$s out of %2$s" "Select all" "HDCP checking" "Set HDCP checking behaviour" "Debugging" "Select debug app" "No debug application set" "Debugging application: %1$s" "Select application" "Nothing" "Wait for debugger" "Debugged application waits for debugger to attach before executing" "Input" "Drawing" "Monitoring" "Strict mode enabled" "Flash screen when apps do long operations on main thread" "Pointer location" "Screen overlay showing current touch data" "Show touches" "Show visual feedback for touches" "Show surface updates" "Flash entire window surfaces when they update" "Show GPU view updates" "Flash views inside windows when drawn with the GPU" "Show hardware layers updates" "Flash hardware layers green when they update" "Show GPU overdraw" "From best to worst: blue, green, light red, red" "Disable HW overlays" "Always use GPU for screen compositing" "Enable tracing" "Select enabled traces" "No traces currently enabled" "%1$d traces currently enabled" "All traces currently enabled" "Enable OpenGL traces" "Show layout bounds" "Show clip bounds, margins, etc." "Show CPU usage" "Screen overlay showing current CPU usage" "Force GPU rendering" "Force use of GPU for 2d drawing" "Force 4x MSAA" "Enable 4x MSAA in OpenGL ES 2.0 apps" "Profile GPU rendering" "Measure rendering time in adb shell dumpsys gfxinfo" "Window animation scale" "Transition animation scale" "Animator duration scale" "Simulate secondary displays" "Apps" "Don\'t keep activities" "Destroy every activity as soon as the user leaves it" "Background process limit" "Show all ANRs" "Show App Not Responding dialogue for background apps" "Data usage" "Data usage cycle" "Data roaming" "Restrict background data" "Separate 4G usage" "Show Wi-Fi usage" "Show Ethernet usage" "Mobile hotspots" "Auto-sync data" "Change cycle…" "Day of month to reset data usage cycle:" "No apps used data during this period." "Foreground" "Background" "restricted" "Disable mobile data?" "Set mobile data limit" "Set 4G data limit" "Set 2G-3G data limit" "Set Wi-Fi data limit" "Wi-Fi" "Ethernet" "Mobile" "4G" "2G-3G" "Mobile" "None" "Mobile data" "2G-3G data" "4G data" "View app settings" "Restrict background data" "Disable background data on mobile networks. Non-mobile networks will be used if available." "To restrict background data for this app, first set a mobile data limit." "Restrict background data?" "This feature may cause an app that depends on background data to stop working when only mobile networks are available."\n\n"You can find more appropriate data usage controls in the settings available within the app." "Restricting background data is possible only when you\'ve set a mobile data limit." "Turn auto-sync data on?" "Any changes you make to your accounts on the web will be automatically copied to your tablet."\n\n"Some accounts may also automatically copy any changes you make on the tablet to the web. A Google Account works this way."\n\n"To choose which kinds of information to sync within each account, go to Settings > Accounts." "Any changes you make to your accounts on the web will be automatically copied to your phone."\n\n"Some accounts may also automatically copy any changes you make on the phone to the web. A Google Account works this way."\n\n"To choose which kinds of information to sync within each account, go to Settings > Accounts." "Turn auto-sync data off?" "This will conserve data and battery usage, but you\'ll need to sync each account manually to collect recent information. And you won\'t receive notifications when updates occur." "Usage cycle reset date" "Date of each month:" "Set" "Set data usage warning" "Set data usage limit" "Limiting data usage" "Your mobile data connection will be disabled when the specified limit is reached."\n\n"Since data usage is measured by your tablet, and your carrier may account for usage differently, consider using a conservative limit." "Your mobile data connection will be disabled when the specified limit is reached."\n\n"Since data usage is measured by your phone, and your carrier may account for usage differently, consider using a conservative limit." "Restrict background data?" "If you restrict background mobile data, some apps and services won\'t work unless you\'re connected to a Wi-Fi network." "If you restrict background mobile data, some apps and services won\'t work unless you\'re connected to a Wi-Fi network."\n\n"This setting affects all users on this tablet." "If you restrict background mobile data, some apps and services won\'t work unless you\'re connected to a Wi-Fi network."\n\n"This setting affects all users on this phone." "^1"" ""^2"\n"warning" "^1"" ""^2"\n"limit" "Removed apps" "Removed apps and users" "%1$s received, %2$s sent" "%2$s: about %1$s used." "%2$s: about %1$s used, as measured by your tablet. Your carrier\'s data usage accounting may differ." "%2$s: about %1$s used, as measured by your phone. Your carrier\'s data usage accounting may differ." "Mobile hotspots" "Select the WiFi networks which are mobile hotspots. Apps can be restricted from using these networks when in the background. Apps may also warn before using these networks for large downloads." "Mobile networks" "WiFi networks" "To select mobile hotspots, turn WiFi on." "Emergency call" "Return to call" "Name" "Type" "Server address" "PPP encryption (MPPE)" "L2TP secret" "IPSec identifier" "IPSec preshared key" "IPSec user certificate" "IPSec CA certificate" "IPSec server certificate" "Show advanced options" "DNS search domains" "DNS servers (e.g. 8.8.8.8)" "Forwarding routes (e.g. 10.0.0.0/8)" "Username" "Password" "Save account information" "(not used)" "(don\'t verify server)" "(received from server)" "Cancel" "Save" "Connect" "Edit VPN profile" "Connect to %s" "VPN" "Add VPN profile" "Edit profile" "Delete profile" "Always-on VPN" "Select a VPN profile to always remain connected to. Network traffic will only be allowed when connected to this VPN." "None" "Always-on VPN requires an IP address for both server and DNS." "There is no network connection. Please try again later." "A certificate is missing. Please edit the profile." "System" "User" "Disable" "Enable" "Remove" "Enable the system CA certificate?" "Disable the system CA certificate?" "Permanently remove the user CA certificate?" "Spell checker" "Type your current full backup password here" "Type a new password for full backups here" "Retype your new full backup password here" "Set backup password" "Cancel" "%d%%" "Additional system updates" "Disabled" "Permissive" "Enforcing" "Users" "You" "Other users" "Add user" "Active" "Not active" "Not set up" "Owner" "Nickname" "Add new user" "You can share this device with other people by creating additional users. Each user has their own space, which they can customise with their own apps, wallpaper and so on. Users can also adjust tablet settings like Wi-Fi that affect everyone."\n\n"After you create a new user, that person needs to go through a setup process."\n\n"Any user can accept updated app permissions on behalf of all other users." "After you create a new user, that person needs to go through a setup process."\n\n"Any user can accept updated app permissions on behalf of all other users." "Set up user now?" "Make sure the person is available to take the tablet and set up their space" "Set up now" "Not now" "Only the tablet\'s owner can manage users." "Only the phone\'s owner can manage users." "Delete %1$s from this device" "New user" "Delete yourself?" "Remove user?" "You will lose your space and data on this tablet. You can\'t undo this action." "You will lose your space and data on this phone. You can\'t undo this action." "This user\'s space and data will disappear from this tablet. You can\'t undo this action." "This user\'s space and data will disappear from this phone. You can\'t undo this action." "Adding new user…" "Delete user" "Delete" "This setting affects all users on this tablet." "This setting affects all users on this phone." "Change language" "Change font size" "Show notifications" "Help" "Account for content" "Photo ID" "Mobile broadcasts" "Select the types of emergency alerts to display."