diff options
author | Jing Yu <jingyu@google.com> | 2011-01-30 22:09:54 -0800 |
---|---|---|
committer | Jing Yu <jingyu@google.com> | 2011-01-30 22:09:54 -0800 |
commit | a9a8b9e7e4aee6a3846ba62703283d10849bc0a6 (patch) | |
tree | bfd550c5e600ab0c227d3615fb5183127604870d /binutils-2.20.1/gas/config/tc-microblaze.c | |
parent | 8a5a8339de3149b7f99caf08e9cb72467d60cd01 (diff) | |
download | toolchain_binutils-a9a8b9e7e4aee6a3846ba62703283d10849bc0a6.zip toolchain_binutils-a9a8b9e7e4aee6a3846ba62703283d10849bc0a6.tar.gz toolchain_binutils-a9a8b9e7e4aee6a3846ba62703283d10849bc0a6.tar.bz2 |
Upgrade binutils and gold.
upgrade binutils-2.19 to binutils-2.20.1
upgrade gold to a relatively new version binutils-20100303
Before, both binutils and gold were built from binutils-2.19.
Now binutils will be built from binutils-2.20.1 and gold will
be built from binutils-20100303.
Change-Id: Ibd0130756723337d2b4783d5b1d5e5b02a1adc83
Diffstat (limited to 'binutils-2.20.1/gas/config/tc-microblaze.c')
-rw-r--r-- | binutils-2.20.1/gas/config/tc-microblaze.c | 2370 |
1 files changed, 2370 insertions, 0 deletions
diff --git a/binutils-2.20.1/gas/config/tc-microblaze.c b/binutils-2.20.1/gas/config/tc-microblaze.c new file mode 100644 index 0000000..72c2246 --- /dev/null +++ b/binutils-2.20.1/gas/config/tc-microblaze.c @@ -0,0 +1,2370 @@ +/* tc-microblaze.c -- Assemble code for Xilinx MicroBlaze + + Copyright 2009 Free Software Foundation. + + This file is part of GAS, the GNU Assembler. + + GAS is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3, or (at your option) + any later version. + + GAS is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with GAS; see the file COPYING. If not, write to the Free + Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA + 02110-1301, USA. */ + +#include <stdio.h> +#include "as.h" +#include "bfd.h" +#include "subsegs.h" +#define DEFINE_TABLE +#include "../opcodes/microblaze-opc.h" +#include "../opcodes/microblaze-opcm.h" +#include "safe-ctype.h" +#include <string.h> +#include <dwarf2dbg.h> +#include "aout/stab_gnu.h" + +#ifndef streq +#define streq(a,b) (strcmp (a, b) == 0) +#endif + +void microblaze_generate_symbol (char *sym); +static bfd_boolean check_spl_reg (unsigned *); + +/* Several places in this file insert raw instructions into the + object. They should generate the instruction + and then use these four macros to crack the instruction value into + the appropriate byte values. */ +#define INST_BYTE0(x) (target_big_endian ? (((x) >> 24) & 0xFF) : ((x) & 0xFF)) +#define INST_BYTE1(x) (target_big_endian ? (((x) >> 16) & 0xFF) : (((x) >> 8) & 0xFF)) +#define INST_BYTE2(x) (target_big_endian ? (((x) >> 8) & 0xFF) : (((x) >> 16) & 0xFF)) +#define INST_BYTE3(x) (target_big_endian ? ((x) & 0xFF) : (((x) >> 24) & 0xFF)) + +/* This array holds the chars that always start a comment. If the + pre-processor is disabled, these aren't very useful. */ +const char comment_chars[] = "#"; + +const char line_separator_chars[] = ";"; + +/* This array holds the chars that only start a comment at the beginning of + a line. */ +const char line_comment_chars[] = "#"; + +const int md_reloc_size = 8; /* Size of relocation record. */ + +/* Chars that can be used to separate mant + from exp in floating point numbers. */ +const char EXP_CHARS[] = "eE"; + +/* Chars that mean this number is a floating point constant + As in 0f12.456 + or 0d1.2345e12. */ +const char FLT_CHARS[] = "rRsSfFdDxXpP"; + +/* INST_PC_OFFSET and INST_NO_OFFSET are 0 and 1. */ +#define UNDEFINED_PC_OFFSET 2 +#define DEFINED_ABS_SEGMENT 3 +#define DEFINED_PC_OFFSET 4 +#define DEFINED_RO_SEGMENT 5 +#define DEFINED_RW_SEGMENT 6 +#define LARGE_DEFINED_PC_OFFSET 7 +#define GOT_OFFSET 8 +#define PLT_OFFSET 9 +#define GOTOFF_OFFSET 10 + + +/* Initialize the relax table. */ +const relax_typeS md_relax_table[] = +{ + { 1, 1, 0, 0 }, /* 0: Unused. */ + { 1, 1, 0, 0 }, /* 1: Unused. */ + { 1, 1, 0, 0 }, /* 2: Unused. */ + { 1, 1, 0, 0 }, /* 3: Unused. */ + { 32767, -32768, INST_WORD_SIZE, LARGE_DEFINED_PC_OFFSET }, /* 4: DEFINED_PC_OFFSET. */ + { 1, 1, 0, 0 }, /* 5: Unused. */ + { 1, 1, 0, 0 }, /* 6: Unused. */ + { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 7: LARGE_DEFINED_PC_OFFSET. */ + { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 8: GOT_OFFSET. */ + { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 9: PLT_OFFSET. */ + { 0x7fffffff, 0x80000000, INST_WORD_SIZE*2, 0 }, /* 10: GOTOFF_OFFSET. */ +}; + +static struct hash_control * opcode_hash_control; /* Opcode mnemonics. */ + +static segT sbss_segment = 0; /* Small bss section. */ +static segT sbss2_segment = 0; /* Section not used. */ +static segT sdata_segment = 0; /* Small data section. */ +static segT sdata2_segment = 0; /* Small read-only section. */ +static segT rodata_segment = 0; /* read-only section. */ + +/* Generate a symbol for stabs information. */ + +void +microblaze_generate_symbol (char *sym) +{ +#define MICROBLAZE_FAKE_LABEL_NAME "XL0\001" + static int microblaze_label_count; + sprintf (sym, "%sL%d", MICROBLAZE_FAKE_LABEL_NAME, microblaze_label_count); + ++microblaze_label_count; +} + +/* Handle the section changing pseudo-ops. */ + +static void +microblaze_s_text (int ignore ATTRIBUTE_UNUSED) +{ +#ifdef OBJ_ELF + obj_elf_text (ignore); +#else + s_text (ignore); +#endif +} + +static void +microblaze_s_data (int ignore ATTRIBUTE_UNUSED) +{ +#ifdef OBJ_ELF + obj_elf_change_section (".data", SHT_PROGBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0); +#else + s_data (ignore); +#endif +} + +/* Things in the .sdata segment are always considered to be in the small data section. */ + +static void +microblaze_s_sdata (int ignore ATTRIBUTE_UNUSED) +{ +#ifdef OBJ_ELF + obj_elf_change_section (".sdata", SHT_PROGBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0); +#else + s_data (ignore); +#endif +} + +/* Pseudo op to make file scope bss items. */ + +static void +microblaze_s_lcomm (int xxx ATTRIBUTE_UNUSED) +{ + char *name; + char c; + char *p; + offsetT size; + symbolS *symbolP; + offsetT align; + segT old_sec; + int old_subsec; + char *pfrag; + int align2; + segT current_seg = now_seg; + subsegT current_subseg = now_subseg; + + name = input_line_pointer; + c = get_symbol_end (); + + /* Just after name is now '\0'. */ + p = input_line_pointer; + *p = c; + SKIP_WHITESPACE (); + if (*input_line_pointer != ',') + { + as_bad (_("Expected comma after symbol-name: rest of line ignored.")); + ignore_rest_of_line (); + return; + } + + input_line_pointer++; /* skip ',' */ + if ((size = get_absolute_expression ()) < 0) + { + as_warn (_(".COMMon length (%ld.) <0! Ignored."), (long) size); + ignore_rest_of_line (); + return; + } + + /* The third argument to .lcomm is the alignment. */ + if (*input_line_pointer != ',') + align = 8; + else + { + ++input_line_pointer; + align = get_absolute_expression (); + if (align <= 0) + { + as_warn (_("ignoring bad alignment")); + align = 8; + } + } + + *p = 0; + symbolP = symbol_find_or_make (name); + *p = c; + + if (S_IS_DEFINED (symbolP) && ! S_IS_COMMON (symbolP)) + { + as_bad (_("Ignoring attempt to re-define symbol `%s'."), + S_GET_NAME (symbolP)); + ignore_rest_of_line (); + return; + } + + if (S_GET_VALUE (symbolP) && S_GET_VALUE (symbolP) != (valueT) size) + { + as_bad (_("Length of .lcomm \"%s\" is already %ld. Not changed to %ld."), + S_GET_NAME (symbolP), + (long) S_GET_VALUE (symbolP), + (long) size); + + ignore_rest_of_line (); + return; + } + + /* Allocate_bss. */ + old_sec = now_seg; + old_subsec = now_subseg; + if (align) + { + /* Convert to a power of 2 alignment. */ + for (align2 = 0; (align & 1) == 0; align >>= 1, ++align2); + if (align != 1) + { + as_bad (_("Common alignment not a power of 2")); + ignore_rest_of_line (); + return; + } + } + else + align2 = 0; + + record_alignment (current_seg, align2); + subseg_set (current_seg, current_subseg); + if (align2) + frag_align (align2, 0, 0); + if (S_GET_SEGMENT (symbolP) == current_seg) + symbol_get_frag (symbolP)->fr_symbol = 0; + symbol_set_frag (symbolP, frag_now); + pfrag = frag_var (rs_org, 1, 1, (relax_substateT) 0, symbolP, size, + (char *) 0); + *pfrag = 0; + S_SET_SIZE (symbolP, size); + S_SET_SEGMENT (symbolP, current_seg); + subseg_set (current_seg, current_subseg); + demand_empty_rest_of_line (); +} + +static void +microblaze_s_rdata (int localvar) +{ +#ifdef OBJ_ELF + if (localvar == 0) + { + /* rodata. */ + obj_elf_change_section (".rodata", SHT_PROGBITS, SHF_ALLOC, 0, 0, 0, 0); + if (rodata_segment == 0) + rodata_segment = subseg_new (".rodata", 0); + } + else + { + /* 1 .sdata2. */ + obj_elf_change_section (".sdata2", SHT_PROGBITS, SHF_ALLOC, 0, 0, 0, 0); + } +#else + s_data (ignore); +#endif +} + +static void +microblaze_s_bss (int localvar) +{ +#ifdef OBJ_ELF + if (localvar == 0) /* bss. */ + obj_elf_change_section (".bss", SHT_NOBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0); + else if (localvar == 1) + { + /* sbss. */ + obj_elf_change_section (".sbss", SHT_NOBITS, SHF_ALLOC+SHF_WRITE, 0, 0, 0, 0); + if (sbss_segment == 0) + sbss_segment = subseg_new (".sbss", 0); + } +#else + s_data (ignore); +#endif +} + +/* endp_p is always 1 as this func is called only for .end <funcname> + This func consumes the <funcname> and calls regular processing + s_func(1) with arg 1 (1 for end). */ + +static void +microblaze_s_func (int end_p ATTRIBUTE_UNUSED) +{ + *input_line_pointer = get_symbol_end (); + s_func (1); +} + +/* Handle the .weakext pseudo-op as defined in Kane and Heinrich. */ + +static void +microblaze_s_weakext (int ignore ATTRIBUTE_UNUSED) +{ + char *name; + int c; + symbolS *symbolP; + expressionS exp; + + name = input_line_pointer; + c = get_symbol_end (); + symbolP = symbol_find_or_make (name); + S_SET_WEAK (symbolP); + *input_line_pointer = c; + + SKIP_WHITESPACE (); + + if (!is_end_of_line[(unsigned char) *input_line_pointer]) + { + if (S_IS_DEFINED (symbolP)) + { + as_bad ("Ignoring attempt to redefine symbol `%s'.", + S_GET_NAME (symbolP)); + ignore_rest_of_line (); + return; + } + + if (*input_line_pointer == ',') + { + ++input_line_pointer; + SKIP_WHITESPACE (); + } + + expression (&exp); + if (exp.X_op != O_symbol) + { + as_bad ("bad .weakext directive"); + ignore_rest_of_line (); + return; + } + symbol_set_value_expression (symbolP, &exp); + } + + demand_empty_rest_of_line (); +} + +/* This table describes all the machine specific pseudo-ops the assembler + has to support. The fields are: + Pseudo-op name without dot + Function to call to execute this pseudo-op + Integer arg to pass to the function. */ +/* If the pseudo-op is not found in this table, it searches in the obj-elf.c, + and then in the read.c table. */ +const pseudo_typeS md_pseudo_table[] = +{ + {"lcomm", microblaze_s_lcomm, 1}, + {"data", microblaze_s_data, 0}, + {"data8", cons, 1}, /* Same as byte. */ + {"data16", cons, 2}, /* Same as hword. */ + {"data32", cons, 4}, /* Same as word. */ + {"ent", s_func, 0}, /* Treat ent as function entry point. */ + {"end", microblaze_s_func, 1}, /* Treat end as function end point. */ + {"gpword", s_rva, 4}, /* gpword label => store resolved label address in data section. */ + {"weakext", microblaze_s_weakext, 0}, + {"rodata", microblaze_s_rdata, 0}, + {"sdata2", microblaze_s_rdata, 1}, + {"sdata", microblaze_s_sdata, 0}, + {"bss", microblaze_s_bss, 0}, + {"sbss", microblaze_s_bss, 1}, + {"text", microblaze_s_text, 0}, + {"word", cons, 4}, + {"frame", s_ignore, 0}, + {"mask", s_ignore, 0}, /* Emitted by gcc. */ + {NULL, NULL, 0} +}; + +/* This function is called once, at assembler startup time. This should + set up all the tables, etc that the MD part of the assembler needs. */ + +void +md_begin (void) +{ + struct op_code_struct * opcode; + + opcode_hash_control = hash_new (); + + /* Insert unique names into hash table. */ + for (opcode = opcodes; opcode->name; opcode ++) + hash_insert (opcode_hash_control, opcode->name, (char *) opcode); +} + +/* Try to parse a reg name. */ + +static char * +parse_reg (char * s, unsigned * reg) +{ + unsigned tmpreg = 0; + + /* Strip leading whitespace. */ + while (ISSPACE (* s)) + ++ s; + + if (strncasecmp (s, "rpc", 3) == 0) + { + *reg = REG_PC; + return s + 3; + } + else if (strncasecmp (s, "rmsr", 4) == 0) + { + *reg = REG_MSR; + return s + 4; + } + else if (strncasecmp (s, "rear", 4) == 0) + { + *reg = REG_EAR; + return s + 4; + } + else if (strncasecmp (s, "resr", 4) == 0) + { + *reg = REG_ESR; + return s + 4; + } + else if (strncasecmp (s, "rfsr", 4) == 0) + { + *reg = REG_FSR; + return s + 4; + } + else if (strncasecmp (s, "rbtr", 4) == 0) + { + *reg = REG_BTR; + return s + 4; + } + else if (strncasecmp (s, "redr", 4) == 0) + { + *reg = REG_EDR; + return s + 4; + } + /* MMU registers start. */ + else if (strncasecmp (s, "rpid", 4) == 0) + { + *reg = REG_PID; + return s + 4; + } + else if (strncasecmp (s, "rzpr", 4) == 0) + { + *reg = REG_ZPR; + return s + 4; + } + else if (strncasecmp (s, "rtlbx", 5) == 0) + { + *reg = REG_TLBX; + return s + 5; + } + else if (strncasecmp (s, "rtlblo", 6) == 0) + { + *reg = REG_TLBLO; + return s + 6; + } + else if (strncasecmp (s, "rtlbhi", 6) == 0) + { + *reg = REG_TLBHI; + return s + 6; + } + else if (strncasecmp (s, "rtlbsx", 6) == 0) + { + *reg = REG_TLBSX; + return s + 6; + } + /* MMU registers end. */ + else if (strncasecmp (s, "rpvr", 4) == 0) + { + if (ISDIGIT (s[4]) && ISDIGIT (s[5])) + { + tmpreg = (s[4]-'0')*10 + s[5] - '0'; + s += 6; + } + + else if (ISDIGIT (s[4])) + { + tmpreg = s[4] - '0'; + s += 5; + } + else + as_bad (_("register expected, but saw '%.6s'"), s); + if ((int) tmpreg >= MIN_PVR_REGNUM && tmpreg <= MAX_PVR_REGNUM) + *reg = REG_PVR + tmpreg; + else + { + as_bad (_("Invalid register number at '%.6s'"), s); + *reg = REG_PVR; + } + return s; + } + else if (strncasecmp (s, "rsp", 3) == 0) + { + *reg = REG_SP; + return s + 3; + } + else if (strncasecmp (s, "rfsl", 4) == 0) + { + if (ISDIGIT (s[4]) && ISDIGIT (s[5])) + { + tmpreg = (s[4] - '0') * 10 + s[5] - '0'; + s += 6; + } + else if (ISDIGIT (s[4])) + { + tmpreg = s[4] - '0'; + s += 5; + } + else + as_bad (_("register expected, but saw '%.6s'"), s); + + if ((int) tmpreg >= MIN_REGNUM && tmpreg <= MAX_REGNUM) + *reg = tmpreg; + else + { + as_bad (_("Invalid register number at '%.6s'"), s); + *reg = 0; + } + return s; + } + else + { + if (TOLOWER (s[0]) == 'r') + { + if (ISDIGIT (s[1]) && ISDIGIT (s[2])) + { + tmpreg = (s[1] - '0') * 10 + s[2] - '0'; + s += 3; + } + else if (ISDIGIT (s[1])) + { + tmpreg = s[1] - '0'; + s += 2; + } + else + as_bad (_("register expected, but saw '%.6s'"), s); + + if ((int)tmpreg >= MIN_REGNUM && tmpreg <= MAX_REGNUM) + *reg = tmpreg; + else + { + as_bad (_("Invalid register number at '%.6s'"), s); + *reg = 0; + } + return s; + } + } + as_bad (_("register expected, but saw '%.6s'"), s); + *reg = 0; + return s; +} + +static char * +parse_exp (char *s, expressionS *e) +{ + char *save; + char *new_pointer; + + /* Skip whitespace. */ + while (ISSPACE (* s)) + ++ s; + + save = input_line_pointer; + input_line_pointer = s; + + expression (e); + + if (e->X_op == O_absent) + as_fatal (_("missing operand")); + + new_pointer = input_line_pointer; + input_line_pointer = save; + + return new_pointer; +} + +/* Symbol modifiers (@GOT, @PLT, @GOTOFF). */ +#define IMM_GOT 1 +#define IMM_PLT 2 +#define IMM_GOTOFF 3 + +static symbolS * GOT_symbol; + +#define GOT_SYMBOL_NAME "_GLOBAL_OFFSET_TABLE_" + +static char * +parse_imm (char * s, expressionS * e, int min, int max) +{ + char *new_pointer; + char *atp; + + /* Find the start of "@GOT" or "@PLT" suffix (if any) */ + for (atp = s; *atp != '@'; atp++) + if (is_end_of_line[(unsigned char) *atp]) + break; + + if (*atp == '@') + { + if (strncmp (atp + 1, "GOTOFF", 5) == 0) + { + *atp = 0; + e->X_md = IMM_GOTOFF; + } + else if (strncmp (atp + 1, "GOT", 3) == 0) + { + *atp = 0; + e->X_md = IMM_GOT; + } + else if (strncmp (atp + 1, "PLT", 3) == 0) + { + *atp = 0; + e->X_md = IMM_PLT; + } + else + { + atp = NULL; + e->X_md = 0; + } + *atp = 0; + } + else + { + atp = NULL; + e->X_md = 0; + } + + if (atp && !GOT_symbol) + { + GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME); + } + + new_pointer = parse_exp (s, e); + + if (e->X_op == O_absent) + ; /* An error message has already been emitted. */ + else if ((e->X_op != O_constant && e->X_op != O_symbol) ) + as_fatal (_("operand must be a constant or a label")); + else if ((e->X_op == O_constant) && ((int) e->X_add_number < min + || (int) e->X_add_number > max)) + { + as_fatal (_("operand must be absolute in range %d..%d, not %d"), + min, max, (int) e->X_add_number); + } + + if (atp) + { + *atp = '@'; /* restore back (needed?) */ + if (new_pointer >= atp) + new_pointer += (e->X_md == IMM_GOTOFF)?7:4; + /* sizeof("@GOTOFF", "@GOT" or "@PLT") */ + + } + return new_pointer; +} + +static char * +check_got (int * got_type, int * got_len) +{ + char *new_pointer; + char *atp; + char *past_got; + int first, second; + char *tmpbuf; + + /* Find the start of "@GOT" or "@PLT" suffix (if any). */ + for (atp = input_line_pointer; *atp != '@'; atp++) + if (is_end_of_line[(unsigned char) *atp]) + return NULL; + + if (strncmp (atp + 1, "GOTOFF", 5) == 0) + { + *got_len = 6; + *got_type = IMM_GOTOFF; + } + else if (strncmp (atp + 1, "GOT", 3) == 0) + { + *got_len = 3; + *got_type = IMM_GOT; + } + else if (strncmp (atp + 1, "PLT", 3) == 0) + { + *got_len = 3; + *got_type = IMM_PLT; + } + else + return NULL; + + if (!GOT_symbol) + GOT_symbol = symbol_find_or_make (GOT_SYMBOL_NAME); + + first = atp - input_line_pointer; + + past_got = atp + *got_len + 1; + for (new_pointer = past_got; !is_end_of_line[(unsigned char) *new_pointer++];) + ; + second = new_pointer - past_got; + tmpbuf = xmalloc (first + second + 2); /* One extra byte for ' ' and one for NUL. */ + memcpy (tmpbuf, input_line_pointer, first); + tmpbuf[first] = ' '; /* @GOTOFF is replaced with a single space. */ + memcpy (tmpbuf + first + 1, past_got, second); + tmpbuf[first + second + 1] = '\0'; + + return tmpbuf; +} + +extern void +parse_cons_expression_microblaze (expressionS *exp, int size) +{ + if (size == 4) + { + /* Handle @GOTOFF et.al. */ + char *save, *gotfree_copy; + int got_len, got_type; + + save = input_line_pointer; + gotfree_copy = check_got (& got_type, & got_len); + if (gotfree_copy) + input_line_pointer = gotfree_copy; + + expression (exp); + + if (gotfree_copy) + { + exp->X_md = got_type; + input_line_pointer = save + (input_line_pointer - gotfree_copy) + + got_len; + free (gotfree_copy); + } + } + else + expression (exp); +} + +/* This is the guts of the machine-dependent assembler. STR points to a + machine dependent instruction. This function is supposed to emit + the frags/bytes it assembles to. */ + +static char * str_microblaze_ro_anchor = "RO"; +static char * str_microblaze_rw_anchor = "RW"; + +static bfd_boolean +check_spl_reg (unsigned * reg) +{ + if ((*reg == REG_MSR) || (*reg == REG_PC) + || (*reg == REG_EAR) || (*reg == REG_ESR) + || (*reg == REG_FSR) || (*reg == REG_BTR) || (*reg == REG_EDR) + || (*reg == REG_PID) || (*reg == REG_ZPR) + || (*reg == REG_TLBX) || (*reg == REG_TLBLO) + || (*reg == REG_TLBHI) || (*reg == REG_TLBSX) + || (*reg >= REG_PVR+MIN_PVR_REGNUM && *reg <= REG_PVR+MAX_PVR_REGNUM)) + return TRUE; + + return FALSE; +} + +/* Here we decide which fixups can be adjusted to make them relative to + the beginning of the section instead of the symbol. Basically we need + to make sure that the dynamic relocations are done correctly, so in + some cases we force the original symbol to be used. */ + +int +tc_microblaze_fix_adjustable (struct fix *fixP) +{ + if (GOT_symbol && fixP->fx_subsy == GOT_symbol) + return 0; + + if (fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GOTOFF + || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_32_GOTOFF + || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_GOT + || fixP->fx_r_type == BFD_RELOC_MICROBLAZE_64_PLT) + return 0; + + return 1; +} + +void +md_assemble (char * str) +{ + char * op_start; + char * op_end; + struct op_code_struct * opcode, *opcode1; + char * output = NULL; + int nlen = 0; + int i; + unsigned long inst, inst1; + unsigned reg1; + unsigned reg2; + unsigned reg3; + unsigned isize; + unsigned int imm, temp; + expressionS exp; + char name[20]; + + /* Drop leading whitespace. */ + while (ISSPACE (* str)) + str ++; + + /* Find the op code end. */ + for (op_start = op_end = str; + * op_end && nlen < 20 && !is_end_of_line [(int)*op_end] && *op_end != ' '; + op_end++) + { + name[nlen] = op_start[nlen]; + nlen++; + } + + name [nlen] = 0; + + if (nlen == 0) + { + as_bad (_("can't find opcode ")); + return; + } + + opcode = (struct op_code_struct *) hash_find (opcode_hash_control, name); + if (opcode == NULL) + { + as_bad (_("unknown opcode \"%s\""), name); + return; + } + + inst = opcode->bit_sequence; + isize = 4; + + switch (opcode->inst_type) + { + case INST_TYPE_RD_R1_R2: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®3); /* Get r2. */ + else + { + as_fatal (_("Error in statement syntax")); + reg3 = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (& reg1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (& reg2)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (& reg3)) + as_fatal (_("Cannot use special register with this instruction")); + + if (streq (name, "sub")) + { + /* sub rd, r1, r2 becomes rsub rd, r2, r1. */ + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg3 << RA_LOW) & RA_MASK; + inst |= (reg2 << RB_LOW) & RB_MASK; + } + else + { + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RA_LOW) & RA_MASK; + inst |= (reg3 << RB_LOW) & RB_MASK; + } + output = frag_more (isize); + break; + + case INST_TYPE_RD_R1_IMM: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); + else + as_fatal (_("Error in statement syntax")); + + /* Check for spl registers. */ + if (check_spl_reg (& reg1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (& reg2)) + as_fatal (_("Cannot use special register with this instruction")); + + if (exp.X_op != O_constant) + { + char *opc; + relax_substateT subtype; + + if (streq (name, "lmi")) + as_fatal (_("lmi pseudo instruction should not use a label in imm field")); + else if (streq (name, "smi")) + as_fatal (_("smi pseudo instruction should not use a label in imm field")); + + if (reg2 == REG_ROSDP) + opc = str_microblaze_ro_anchor; + else if (reg2 == REG_RWSDP) + opc = str_microblaze_rw_anchor; + else + opc = NULL; + if (exp.X_md == IMM_GOT) + subtype = GOT_OFFSET; + else if (exp.X_md == IMM_PLT) + subtype = PLT_OFFSET; + else if (exp.X_md == IMM_GOTOFF) + subtype = GOTOFF_OFFSET; + else + subtype = opcode->inst_offset_type; + + output = frag_var (rs_machine_dependent, + isize * 2, /* maxm of 2 words. */ + isize, /* minm of 1 word. */ + subtype, /* PC-relative or not. */ + exp.X_add_symbol, + exp.X_add_number, + opc); + imm = 0; + } + else + { + output = frag_more (isize); + imm = exp.X_add_number; + } + + if (streq (name, "lmi") || streq (name, "smi")) + { + /* Load/store 32-d consecutive registers. Used on exit/entry + to subroutines to save and restore registers to stack. + Generate 32-d insts. */ + int count; + + count = 32 - reg1; + if (streq (name, "lmi")) + opcode = (struct op_code_struct *) hash_find (opcode_hash_control, "lwi"); + else + opcode = (struct op_code_struct *) hash_find (opcode_hash_control, "swi"); + if (opcode == NULL) + { + as_bad (_("unknown opcode \"%s\""), "lwi"); + return; + } + inst = opcode->bit_sequence; + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + + for (i = 0; i < count - 1; i++) + { + output[0] = INST_BYTE0 (inst); + output[1] = INST_BYTE1 (inst); + output[2] = INST_BYTE2 (inst); + output[3] = INST_BYTE3 (inst); + output = frag_more (isize); + imm = imm + 4; + reg1++; + inst = opcode->bit_sequence; + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + } + } + else + { + temp = imm & 0xFFFF8000; + if ((temp != 0) && (temp != 0xFFFF8000)) + { + /* Needs an immediate inst. */ + opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); + if (opcode1 == NULL) + { + as_bad (_("unknown opcode \"%s\""), "imm"); + return; + } + + inst1 = opcode1->bit_sequence; + inst1 |= ((imm & 0xFFFF0000) >> 16) & IMM_MASK; + output[0] = INST_BYTE0 (inst1); + output[1] = INST_BYTE1 (inst1); + output[2] = INST_BYTE2 (inst1); + output[3] = INST_BYTE3 (inst1); + output = frag_more (isize); + } + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + } + break; + + case INST_TYPE_RD_R1_IMM5: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); + else + as_fatal (_("Error in statement syntax")); + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (®2)) + as_fatal (_("Cannot use special register with this instruction")); + + if (exp.X_op != O_constant) + as_warn (_("Symbol used as immediate for shift instruction")); + else + { + output = frag_more (isize); + imm = exp.X_add_number; + } + + if (imm != (imm % 32)) + { + as_warn (_("Shift value > 32. using <value %% 32>")); + imm = imm % 32; + } + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & IMM5_MASK; + break; + + case INST_TYPE_R1_R2: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r2. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (& reg1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (& reg2)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RA_LOW) & RA_MASK; + inst |= (reg2 << RB_LOW) & RB_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_RD_R1: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 =0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (®2)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RA_LOW) & RA_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_RD_RFSL: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, &imm); /* Get rfslN. */ + else + { + as_fatal (_("Error in statement syntax")); + imm = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (imm << IMM_LOW) & RFSL_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_RD_IMM15: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + + if (strcmp (op_end, "")) + op_end = parse_imm (op_end + 1, & exp, MIN_IMM15, MAX_IMM15); + else + as_fatal (_("Error in statement syntax")); + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + if (exp.X_op != O_constant) + as_fatal (_("Symbol used as immediate value for msrset/msrclr instructions")); + else + { + output = frag_more (isize); + imm = exp.X_add_number; + } + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (imm << IMM_LOW) & IMM15_MASK; + break; + + case INST_TYPE_R1_RFSL: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, &imm); /* Get rfslN. */ + else + { + as_fatal (_("Error in statement syntax")); + imm = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & RFSL_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_RFSL: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, &imm); /* Get rfslN. */ + else + { + as_fatal (_("Error in statement syntax")); + imm = 0; + } + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + inst |= (imm << IMM_LOW) & RFSL_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_R1: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RA_LOW) & RA_MASK; + output = frag_more (isize); + break; + + /* For tuqula insn...:) */ + case INST_TYPE_RD: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RD_LOW) & RD_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_RD_SPECIAL: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + + if (reg2 == REG_MSR) + imm = opcode->immval_mask | REG_MSR_MASK; + else if (reg2 == REG_PC) + imm = opcode->immval_mask | REG_PC_MASK; + else if (reg2 == REG_EAR) + imm = opcode->immval_mask | REG_EAR_MASK; + else if (reg2 == REG_ESR) + imm = opcode->immval_mask | REG_ESR_MASK; + else if (reg2 == REG_FSR) + imm = opcode->immval_mask | REG_FSR_MASK; + else if (reg2 == REG_BTR) + imm = opcode->immval_mask | REG_BTR_MASK; + else if (reg2 == REG_EDR) + imm = opcode->immval_mask | REG_EDR_MASK; + else if (reg2 == REG_PID) + imm = opcode->immval_mask | REG_PID_MASK; + else if (reg2 == REG_ZPR) + imm = opcode->immval_mask | REG_ZPR_MASK; + else if (reg2 == REG_TLBX) + imm = opcode->immval_mask | REG_TLBX_MASK; + else if (reg2 == REG_TLBLO) + imm = opcode->immval_mask | REG_TLBLO_MASK; + else if (reg2 == REG_TLBHI) + imm = opcode->immval_mask | REG_TLBHI_MASK; + else if (reg2 >= (REG_PVR+MIN_PVR_REGNUM) && reg2 <= (REG_PVR+MAX_PVR_REGNUM)) + imm = opcode->immval_mask | REG_PVR_MASK | reg2; + else + as_fatal (_("invalid value for special purpose register")); + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_SPECIAL_R1: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + + if (reg1 == REG_MSR) + imm = opcode->immval_mask | REG_MSR_MASK; + else if (reg1 == REG_PC) + imm = opcode->immval_mask | REG_PC_MASK; + else if (reg1 == REG_EAR) + imm = opcode->immval_mask | REG_EAR_MASK; + else if (reg1 == REG_ESR) + imm = opcode->immval_mask | REG_ESR_MASK; + else if (reg1 == REG_FSR) + imm = opcode->immval_mask | REG_FSR_MASK; + else if (reg1 == REG_BTR) + imm = opcode->immval_mask | REG_BTR_MASK; + else if (reg1 == REG_EDR) + imm = opcode->immval_mask | REG_EDR_MASK; + else if (reg1 == REG_PID) + imm = opcode->immval_mask | REG_PID_MASK; + else if (reg1 == REG_ZPR) + imm = opcode->immval_mask | REG_ZPR_MASK; + else if (reg1 == REG_TLBX) + imm = opcode->immval_mask | REG_TLBX_MASK; + else if (reg1 == REG_TLBLO) + imm = opcode->immval_mask | REG_TLBLO_MASK; + else if (reg1 == REG_TLBHI) + imm = opcode->immval_mask | REG_TLBHI_MASK; + else if (reg1 == REG_TLBSX) + imm = opcode->immval_mask | REG_TLBSX_MASK; + else + as_fatal (_("invalid value for special purpose register")); + inst |= (reg2 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_RD_R1_SPECIAL: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 =0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (®2)) + as_fatal (_("Cannot use special register with this instruction")); + + /* insn wic ra, rb => wic ra, ra, rb. */ + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg1 << RA_LOW) & RA_MASK; + inst |= (reg2 << RB_LOW) & RB_MASK; + + output = frag_more (isize); + break; + + case INST_TYPE_RD_R2: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r2. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + if (check_spl_reg (®2)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (reg2 << RB_LOW) & RB_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_R1_IMM: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get r1. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); + else + as_fatal (_("Error in statement syntax")); + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + if (exp.X_op != O_constant) + { + char *opc = NULL; + relax_substateT subtype; + + if (exp.X_md == IMM_GOT) + subtype = GOT_OFFSET; + else if (exp.X_md == IMM_PLT) + subtype = PLT_OFFSET; + else + subtype = opcode->inst_offset_type; + output = frag_var (rs_machine_dependent, + isize * 2, /* maxm of 2 words. */ + isize, /* minm of 1 word. */ + subtype, /* PC-relative or not. */ + exp.X_add_symbol, + exp.X_add_number, + opc); + imm = 0; + } + else + { + output = frag_more (isize); + imm = exp.X_add_number; + } + + temp = imm & 0xFFFF8000; + if ((temp != 0) && (temp != 0xFFFF8000)) + { + /* Needs an immediate inst. */ + opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); + if (opcode1 == NULL) + { + as_bad (_("unknown opcode \"%s\""), "imm"); + return; + } + + inst1 = opcode1->bit_sequence; + inst1 |= ((imm & 0xFFFF0000) >> 16) & IMM_MASK; + output[0] = INST_BYTE0 (inst1); + output[1] = INST_BYTE1 (inst1); + output[2] = INST_BYTE2 (inst1); + output[3] = INST_BYTE3 (inst1); + output = frag_more (isize); + } + + inst |= (reg1 << RA_LOW) & RA_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + break; + + case INST_TYPE_RD_IMM: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®1); /* Get rd. */ + else + { + as_fatal (_("Error in statement syntax")); + reg1 = 0; + } + if (strcmp (op_end, "")) + op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); + else + as_fatal (_("Error in statement syntax")); + + /* Check for spl registers. */ + if (check_spl_reg (®1)) + as_fatal (_("Cannot use special register with this instruction")); + + if (exp.X_op != O_constant) + { + char *opc = NULL; + relax_substateT subtype; + + if (exp.X_md == IMM_GOT) + subtype = GOT_OFFSET; + else if (exp.X_md == IMM_PLT) + subtype = PLT_OFFSET; + else + subtype = opcode->inst_offset_type; + output = frag_var (rs_machine_dependent, + isize * 2, /* maxm of 2 words. */ + isize, /* minm of 1 word. */ + subtype, /* PC-relative or not. */ + exp.X_add_symbol, + exp.X_add_number, + opc); + imm = 0; + } + else + { + output = frag_more (isize); + imm = exp.X_add_number; + } + + temp = imm & 0xFFFF8000; + if ((temp != 0) && (temp != 0xFFFF8000)) + { + /* Needs an immediate inst. */ + opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); + if (opcode1 == NULL) + { + as_bad (_("unknown opcode \"%s\""), "imm"); + return; + } + + inst1 = opcode1->bit_sequence; + inst1 |= ((imm & 0xFFFF0000) >> 16) & IMM_MASK; + output[0] = INST_BYTE0 (inst1); + output[1] = INST_BYTE1 (inst1); + output[2] = INST_BYTE2 (inst1); + output[3] = INST_BYTE3 (inst1); + output = frag_more (isize); + } + + inst |= (reg1 << RD_LOW) & RD_MASK; + inst |= (imm << IMM_LOW) & IMM_MASK; + break; + + case INST_TYPE_R2: + if (strcmp (op_end, "")) + op_end = parse_reg (op_end + 1, ®2); /* Get r2. */ + else + { + as_fatal (_("Error in statement syntax")); + reg2 = 0; + } + + /* Check for spl registers. */ + if (check_spl_reg (®2)) + as_fatal (_("Cannot use special register with this instruction")); + + inst |= (reg2 << RB_LOW) & RB_MASK; + output = frag_more (isize); + break; + + case INST_TYPE_IMM: + if (streq (name, "imm")) + as_fatal (_("An IMM instruction should not be present in the .s file")); + + op_end = parse_imm (op_end + 1, & exp, MIN_IMM, MAX_IMM); + + if (exp.X_op != O_constant) + { + char *opc = NULL; + relax_substateT subtype; + + if (exp.X_md == IMM_GOT) + subtype = GOT_OFFSET; + else if (exp.X_md == IMM_PLT) + subtype = PLT_OFFSET; + else + subtype = opcode->inst_offset_type; + output = frag_var (rs_machine_dependent, + isize * 2, /* maxm of 2 words. */ + isize, /* minm of 1 word. */ + subtype, /* PC-relative or not. */ + exp.X_add_symbol, + exp.X_add_number, + opc); + imm = 0; + } + else + { + output = frag_more (isize); + imm = exp.X_add_number; + } + + + temp = imm & 0xFFFF8000; + if ((temp != 0) && (temp != 0xFFFF8000)) + { + /* Needs an immediate inst. */ + opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); + if (opcode1 == NULL) + { + as_bad (_("unknown opcode \"%s\""), "imm"); + return; + } + + inst1 = opcode1->bit_sequence; + inst1 |= ((imm & 0xFFFF0000) >> 16) & IMM_MASK; + output[0] = INST_BYTE0 (inst1); + output[1] = INST_BYTE1 (inst1); + output[2] = INST_BYTE2 (inst1); + output[3] = INST_BYTE3 (inst1); + output = frag_more (isize); + } + inst |= (imm << IMM_LOW) & IMM_MASK; + break; + + case INST_TYPE_NONE: + output = frag_more (isize); + break; + + default: + as_fatal (_("unimplemented opcode \"%s\""), name); + } + + /* Drop whitespace after all the operands have been parsed. */ + while (ISSPACE (* op_end)) + op_end ++; + + /* Give warning message if the insn has more operands than required. */ + if (strcmp (op_end, opcode->name) && strcmp (op_end, "")) + as_warn (_("ignoring operands: %s "), op_end); + + output[0] = INST_BYTE0 (inst); + output[1] = INST_BYTE1 (inst); + output[2] = INST_BYTE2 (inst); + output[3] = INST_BYTE3 (inst); + +#ifdef OBJ_ELF + dwarf2_emit_insn (4); +#endif +} + +symbolS * +md_undefined_symbol (char * name ATTRIBUTE_UNUSED) +{ + return NULL; +} + +/* Various routines to kill one day. */ +/* Equal to MAX_PRECISION in atof-ieee.c */ +#define MAX_LITTLENUMS 6 + +/* Turn a string in input_line_pointer into a floating point constant of type + type, and store the appropriate bytes in *litP. The number of LITTLENUMS + emitted is stored in *sizeP. An error message is returned, or NULL on OK.*/ +char * +md_atof (int type, char * litP, int * sizeP) +{ + int prec; + LITTLENUM_TYPE words[MAX_LITTLENUMS]; + int i; + char * t; + + switch (type) + { + case 'f': + case 'F': + case 's': + case 'S': + prec = 2; + break; + + case 'd': + case 'D': + case 'r': + case 'R': + prec = 4; + break; + + case 'x': + case 'X': + prec = 6; + break; + + case 'p': + case 'P': + prec = 6; + break; + + default: + *sizeP = 0; + return _("Bad call to MD_NTOF()"); + } + + t = atof_ieee (input_line_pointer, type, words); + + if (t) + input_line_pointer = t; + + *sizeP = prec * sizeof (LITTLENUM_TYPE); + + if (! target_big_endian) + { + for (i = prec - 1; i >= 0; i--) + { + md_number_to_chars (litP, (valueT) words[i], + sizeof (LITTLENUM_TYPE)); + litP += sizeof (LITTLENUM_TYPE); + } + } + else + for (i = 0; i < prec; i++) + { + md_number_to_chars (litP, (valueT) words[i], + sizeof (LITTLENUM_TYPE)); + litP += sizeof (LITTLENUM_TYPE); + } + + return NULL; +} + +const char * md_shortopts = ""; + +struct option md_longopts[] = +{ + { NULL, no_argument, NULL, 0} +}; + +size_t md_longopts_size = sizeof (md_longopts); + +int md_short_jump_size; + +void +md_create_short_jump (char * ptr ATTRIBUTE_UNUSED, + addressT from_Nddr ATTRIBUTE_UNUSED, + addressT to_Nddr ATTRIBUTE_UNUSED, + fragS * frag ATTRIBUTE_UNUSED, + symbolS * to_symbol ATTRIBUTE_UNUSED) +{ + as_fatal (_("failed sanity check: short_jump")); +} + +void +md_create_long_jump (char * ptr ATTRIBUTE_UNUSED, + addressT from_Nddr ATTRIBUTE_UNUSED, + addressT to_Nddr ATTRIBUTE_UNUSED, + fragS * frag ATTRIBUTE_UNUSED, + symbolS * to_symbol ATTRIBUTE_UNUSED) +{ + as_fatal (_("failed sanity check: long_jump")); +} + +/* Called after relaxing, change the frags so they know how big they are. */ + +void +md_convert_frag (bfd * abfd ATTRIBUTE_UNUSED, + segT sec ATTRIBUTE_UNUSED, + fragS * fragP) +{ + fixS *fixP; + + switch (fragP->fr_subtype) + { + case UNDEFINED_PC_OFFSET: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, TRUE, BFD_RELOC_64_PCREL); + fragP->fr_fix += INST_WORD_SIZE * 2; + fragP->fr_var = 0; + break; + case DEFINED_ABS_SEGMENT: + if (fragP->fr_symbol == GOT_symbol) + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_GOTPC); + else + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, FALSE, BFD_RELOC_64); + fragP->fr_fix += INST_WORD_SIZE * 2; + fragP->fr_var = 0; + break; + case DEFINED_RO_SEGMENT: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, + fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_32_ROSDA); + fragP->fr_fix += INST_WORD_SIZE; + fragP->fr_var = 0; + break; + case DEFINED_RW_SEGMENT: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, + fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_32_RWSDA); + fragP->fr_fix += INST_WORD_SIZE; + fragP->fr_var = 0; + break; + case DEFINED_PC_OFFSET: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE, fragP->fr_symbol, + fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_32_LO_PCREL); + fragP->fr_fix += INST_WORD_SIZE; + fragP->fr_var = 0; + break; + case LARGE_DEFINED_PC_OFFSET: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, TRUE, BFD_RELOC_64_PCREL); + fragP->fr_fix += INST_WORD_SIZE * 2; + fragP->fr_var = 0; + break; + case GOT_OFFSET: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_GOT); + fragP->fr_fix += INST_WORD_SIZE * 2; + fragP->fr_var = 0; + break; + case PLT_OFFSET: + fixP = fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, TRUE, BFD_RELOC_MICROBLAZE_64_PLT); + /* fixP->fx_plt = 1; */ + fragP->fr_fix += INST_WORD_SIZE * 2; + fragP->fr_var = 0; + break; + case GOTOFF_OFFSET: + fix_new (fragP, fragP->fr_fix, INST_WORD_SIZE * 2, fragP->fr_symbol, + fragP->fr_offset, FALSE, BFD_RELOC_MICROBLAZE_64_GOTOFF); + fragP->fr_fix += INST_WORD_SIZE * 2; + fragP->fr_var = 0; + break; + + default: + abort (); + } +} + +/* Applies the desired value to the specified location. + Also sets up addends for 'rela' type relocations. */ +void +md_apply_fix (fixS * fixP, + valueT * valp, + segT segment) +{ + char * buf = fixP->fx_where + fixP->fx_frag->fr_literal; + char * file = fixP->fx_file ? fixP->fx_file : _("unknown"); + const char * symname; + /* Note: use offsetT because it is signed, valueT is unsigned. */ + offsetT val = (offsetT) * valp; + int i; + struct op_code_struct * opcode1; + unsigned long inst1; + + symname = fixP->fx_addsy ? S_GET_NAME (fixP->fx_addsy) : _("<unknown>"); + + /* fixP->fx_offset is supposed to be set up correctly for all + symbol relocations. */ + if (fixP->fx_addsy == NULL) + { + if (!fixP->fx_pcrel) + fixP->fx_offset = val; /* Absolute relocation. */ + else + fprintf (stderr, "NULL symbol PC-relative relocation? offset = %08x, val = %08x\n", + (unsigned int) fixP->fx_offset, (unsigned int) val); + } + + /* If we aren't adjusting this fixup to be against the section + symbol, we need to adjust the value. */ + if (fixP->fx_addsy != NULL) + { + if (S_IS_WEAK (fixP->fx_addsy) + || (symbol_used_in_reloc_p (fixP->fx_addsy) + && (((bfd_get_section_flags (stdoutput, + S_GET_SEGMENT (fixP->fx_addsy)) + & SEC_LINK_ONCE) != 0) + || !strncmp (segment_name (S_GET_SEGMENT (fixP->fx_addsy)), + ".gnu.linkonce", + sizeof (".gnu.linkonce") - 1)))) + { + val -= S_GET_VALUE (fixP->fx_addsy); + if (val != 0 && ! fixP->fx_pcrel) + { + /* In this case, the bfd_install_relocation routine will + incorrectly add the symbol value back in. We just want + the addend to appear in the object file. + FIXME: If this makes VALUE zero, we're toast. */ + val -= S_GET_VALUE (fixP->fx_addsy); + } + } + } + + /* If the fix is relative to a symbol which is not defined, or not + in the same segment as the fix, we cannot resolve it here. */ + /* fixP->fx_addsy is NULL if valp contains the entire relocation. */ + if (fixP->fx_addsy != NULL + && (!S_IS_DEFINED (fixP->fx_addsy) + || (S_GET_SEGMENT (fixP->fx_addsy) != segment))) + { + fixP->fx_done = 0; +#ifdef OBJ_ELF + /* For ELF we can just return and let the reloc that will be generated + take care of everything. For COFF we still have to insert 'val' + into the insn since the addend field will be ignored. */ + /* return; */ +#endif + } + /* All fixups in the text section must be handled in the linker. */ + else if (segment->flags & SEC_CODE) + fixP->fx_done = 0; + else if (!fixP->fx_pcrel && fixP->fx_addsy != NULL) + fixP->fx_done = 0; + else + fixP->fx_done = 1; + + switch (fixP->fx_r_type) + { + case BFD_RELOC_MICROBLAZE_32_LO: + case BFD_RELOC_MICROBLAZE_32_LO_PCREL: + if (target_big_endian) + { + buf[2] |= ((val >> 8) & 0xff); + buf[3] |= (val & 0xff); + } + else + { + buf[1] |= ((val >> 8) & 0xff); + buf[0] |= (val & 0xff); + } + break; + case BFD_RELOC_MICROBLAZE_32_ROSDA: + case BFD_RELOC_MICROBLAZE_32_RWSDA: + /* Don't do anything if the symbol is not defined. */ + if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) + { + if (((val & 0xFFFF8000) != 0) && ((val & 0xFFFF8000) != 0xFFFF8000)) + as_bad_where (file, fixP->fx_line, + _("pcrel for branch to %s too far (0x%x)"), + symname, (int) val); + if (target_big_endian) + { + buf[2] |= ((val >> 8) & 0xff); + buf[3] |= (val & 0xff); + } + else + { + buf[1] |= ((val >> 8) & 0xff); + buf[0] |= (val & 0xff); + } + } + break; + case BFD_RELOC_32: + case BFD_RELOC_RVA: + case BFD_RELOC_32_PCREL: + case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM: + /* Don't do anything if the symbol is not defined. */ + if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) + { + if (target_big_endian) + { + buf[0] |= ((val >> 24) & 0xff); + buf[1] |= ((val >> 16) & 0xff); + buf[2] |= ((val >> 8) & 0xff); + buf[3] |= (val & 0xff); + } + else + { + buf[3] |= ((val >> 24) & 0xff); + buf[2] |= ((val >> 16) & 0xff); + buf[1] |= ((val >> 8) & 0xff); + buf[0] |= (val & 0xff); + } + } + break; + case BFD_RELOC_64_PCREL: + case BFD_RELOC_64: + /* Add an imm instruction. First save the current instruction. */ + for (i = 0; i < INST_WORD_SIZE; i++) + buf[i + INST_WORD_SIZE] = buf[i]; + + /* Generate the imm instruction. */ + opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); + if (opcode1 == NULL) + { + as_bad (_("unknown opcode \"%s\""), "imm"); + return; + } + + inst1 = opcode1->bit_sequence; + if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) + inst1 |= ((val & 0xFFFF0000) >> 16) & IMM_MASK; + + buf[0] = INST_BYTE0 (inst1); + buf[1] = INST_BYTE1 (inst1); + buf[2] = INST_BYTE2 (inst1); + buf[3] = INST_BYTE3 (inst1); + + /* Add the value only if the symbol is defined. */ + if (fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) + { + if (target_big_endian) + { + buf[6] |= ((val >> 8) & 0xff); + buf[7] |= (val & 0xff); + } + else + { + buf[5] |= ((val >> 8) & 0xff); + buf[4] |= (val & 0xff); + } + } + break; + + case BFD_RELOC_MICROBLAZE_64_GOTPC: + case BFD_RELOC_MICROBLAZE_64_GOT: + case BFD_RELOC_MICROBLAZE_64_PLT: + case BFD_RELOC_MICROBLAZE_64_GOTOFF: + /* Add an imm instruction. First save the current instruction. */ + for (i = 0; i < INST_WORD_SIZE; i++) + buf[i + INST_WORD_SIZE] = buf[i]; + + /* Generate the imm instruction. */ + opcode1 = (struct op_code_struct *) hash_find (opcode_hash_control, "imm"); + if (opcode1 == NULL) + { + as_bad (_("unknown opcode \"%s\""), "imm"); + return; + } + + inst1 = opcode1->bit_sequence; + + /* We can fixup call to a defined non-global address + within the same section only. */ + buf[0] = INST_BYTE0 (inst1); + buf[1] = INST_BYTE1 (inst1); + buf[2] = INST_BYTE2 (inst1); + buf[3] = INST_BYTE3 (inst1); + return; + + default: + break; + } + + if (fixP->fx_addsy == NULL) + { + /* This fixup has been resolved. Create a reloc in case the linker + moves code around due to relaxing. */ + if (fixP->fx_r_type == BFD_RELOC_64_PCREL) + fixP->fx_r_type = BFD_RELOC_MICROBLAZE_64_NONE; + else + fixP->fx_r_type = BFD_RELOC_NONE; + fixP->fx_addsy = section_symbol (absolute_section); + } + return; +} + +void +md_operand (expressionS * expressionP) +{ + /* Ignore leading hash symbol, if present. */ + if (*input_line_pointer == '#') + { + input_line_pointer ++; + expression (expressionP); + } +} + +/* Called just before address relaxation, return the length + by which a fragment must grow to reach it's destination. */ + +int +md_estimate_size_before_relax (fragS * fragP, + segT segment_type) +{ + sbss_segment = bfd_get_section_by_name (stdoutput, ".sbss"); + sbss2_segment = bfd_get_section_by_name (stdoutput, ".sbss2"); + sdata_segment = bfd_get_section_by_name (stdoutput, ".sdata"); + sdata2_segment = bfd_get_section_by_name (stdoutput, ".sdata2"); + + switch (fragP->fr_subtype) + { + case INST_PC_OFFSET: + /* Used to be a PC-relative branch. */ + if (!fragP->fr_symbol) + { + /* We know the abs value: Should never happen. */ + as_bad (_("Absolute PC-relative value in relaxation code. Assembler error.....")); + abort (); + } + else if ((S_GET_SEGMENT (fragP->fr_symbol) == segment_type)) + { + fragP->fr_subtype = DEFINED_PC_OFFSET; + /* Don't know now whether we need an imm instruction. */ + fragP->fr_var = INST_WORD_SIZE; + } + else if (S_IS_DEFINED (fragP->fr_symbol) + && (((S_GET_SEGMENT (fragP->fr_symbol))->flags & SEC_CODE) == 0)) + { + /* Cannot have a PC-relative branch to a diff segment. */ + as_bad (_("PC relative branch to label %s which is not in the instruction space"), + S_GET_NAME (fragP->fr_symbol)); + fragP->fr_subtype = UNDEFINED_PC_OFFSET; + fragP->fr_var = INST_WORD_SIZE*2; + } + else + { + fragP->fr_subtype = UNDEFINED_PC_OFFSET; + fragP->fr_var = INST_WORD_SIZE*2; + } + break; + + case INST_NO_OFFSET: + /* Used to be a reference to somewhere which was unknown. */ + if (fragP->fr_symbol) + { + if (fragP->fr_opcode == NULL) + { + /* Used as an absolute value. */ + fragP->fr_subtype = DEFINED_ABS_SEGMENT; + /* Variable part does not change. */ + fragP->fr_var = INST_WORD_SIZE*2; + } + else if (streq (fragP->fr_opcode, str_microblaze_ro_anchor)) + { + /* It is accessed using the small data read only anchor. */ + if ((S_GET_SEGMENT (fragP->fr_symbol) == &bfd_com_section) + || (S_GET_SEGMENT (fragP->fr_symbol) == sdata2_segment) + || (S_GET_SEGMENT (fragP->fr_symbol) == sbss2_segment) + || (! S_IS_DEFINED (fragP->fr_symbol))) + { + fragP->fr_subtype = DEFINED_RO_SEGMENT; + fragP->fr_var = INST_WORD_SIZE; + } + else + { + /* Variable not in small data read only segment accessed + using small data read only anchor. */ + char *file = fragP->fr_file ? fragP->fr_file : _("unknown"); + + as_bad_where (file, fragP->fr_line, + _("Variable is accessed using small data read " + "only anchor, but it is not in the small data " + "read only section")); + fragP->fr_subtype = DEFINED_RO_SEGMENT; + fragP->fr_var = INST_WORD_SIZE; + } + } + else if (streq (fragP->fr_opcode, str_microblaze_rw_anchor)) + { + if ((S_GET_SEGMENT (fragP->fr_symbol) == &bfd_com_section) + || (S_GET_SEGMENT (fragP->fr_symbol) == sdata_segment) + || (S_GET_SEGMENT (fragP->fr_symbol) == sbss_segment) + || (!S_IS_DEFINED (fragP->fr_symbol))) + { + /* It is accessed using the small data read write anchor. */ + fragP->fr_subtype = DEFINED_RW_SEGMENT; + fragP->fr_var = INST_WORD_SIZE; + } + else + { + char *file = fragP->fr_file ? fragP->fr_file : _("unknown"); + + as_bad_where (file, fragP->fr_line, + _("Variable is accessed using small data read " + "write anchor, but it is not in the small data " + "read write section")); + fragP->fr_subtype = DEFINED_RW_SEGMENT; + fragP->fr_var = INST_WORD_SIZE; + } + } + else + { + as_bad (_("Incorrect fr_opcode value in frag. Internal error.....")); + abort (); + } + } + else + { + /* We know the abs value: Should never happen. */ + as_bad (_("Absolute value in relaxation code. Assembler error.....")); + abort (); + } + break; + + case UNDEFINED_PC_OFFSET: + case LARGE_DEFINED_PC_OFFSET: + case DEFINED_ABS_SEGMENT: + case GOT_OFFSET: + case PLT_OFFSET: + case GOTOFF_OFFSET: + fragP->fr_var = INST_WORD_SIZE*2; + break; + case DEFINED_RO_SEGMENT: + case DEFINED_RW_SEGMENT: + case DEFINED_PC_OFFSET: + fragP->fr_var = INST_WORD_SIZE; + break; + default: + abort (); + } + + return fragP->fr_var; +} + +/* Put number into target byte order. */ + +void +md_number_to_chars (char * ptr, valueT use, int nbytes) +{ + if (target_big_endian) + number_to_chars_bigendian (ptr, use, nbytes); + else + number_to_chars_littleendian (ptr, use, nbytes); +} + +/* Round up a section size to the appropriate boundary. */ + +valueT +md_section_align (segT segment ATTRIBUTE_UNUSED, valueT size) +{ + return size; /* Byte alignment is fine. */ +} + + +/* The location from which a PC relative jump should be calculated, + given a PC relative reloc. */ + +long +md_pcrel_from_section (fixS * fixp, segT sec ATTRIBUTE_UNUSED) +{ +#ifdef OBJ_ELF + /* If the symbol is undefined or defined in another section + we leave the add number alone for the linker to fix it later. + Only account for the PC pre-bump (No PC-pre-bump on the Microblaze). */ + + if (fixp->fx_addsy != (symbolS *) NULL + && (!S_IS_DEFINED (fixp->fx_addsy) + || (S_GET_SEGMENT (fixp->fx_addsy) != sec))) + return 0; + else + { + /* The case where we are going to resolve things... */ + if (fixp->fx_r_type == BFD_RELOC_64_PCREL) + return fixp->fx_where + fixp->fx_frag->fr_address + INST_WORD_SIZE; + else + return fixp->fx_where + fixp->fx_frag->fr_address; + } +#endif +} + + +#define F(SZ,PCREL) (((SZ) << 1) + (PCREL)) +#define MAP(SZ,PCREL,TYPE) case F (SZ, PCREL): code = (TYPE); break + +arelent * +tc_gen_reloc (asection * section ATTRIBUTE_UNUSED, fixS * fixp) +{ + arelent * rel; + bfd_reloc_code_real_type code; + + switch (fixp->fx_r_type) + { + case BFD_RELOC_NONE: + case BFD_RELOC_MICROBLAZE_64_NONE: + case BFD_RELOC_32: + case BFD_RELOC_MICROBLAZE_32_LO: + case BFD_RELOC_MICROBLAZE_32_LO_PCREL: + case BFD_RELOC_RVA: + case BFD_RELOC_64: + case BFD_RELOC_64_PCREL: + case BFD_RELOC_MICROBLAZE_32_ROSDA: + case BFD_RELOC_MICROBLAZE_32_RWSDA: + case BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM: + case BFD_RELOC_MICROBLAZE_64_GOTPC: + case BFD_RELOC_MICROBLAZE_64_GOT: + case BFD_RELOC_MICROBLAZE_64_PLT: + case BFD_RELOC_MICROBLAZE_64_GOTOFF: + case BFD_RELOC_MICROBLAZE_32_GOTOFF: + code = fixp->fx_r_type; + break; + + default: + switch (F (fixp->fx_size, fixp->fx_pcrel)) + { + MAP (1, 0, BFD_RELOC_8); + MAP (2, 0, BFD_RELOC_16); + MAP (4, 0, BFD_RELOC_32); + MAP (1, 1, BFD_RELOC_8_PCREL); + MAP (2, 1, BFD_RELOC_16_PCREL); + MAP (4, 1, BFD_RELOC_32_PCREL); + default: + code = fixp->fx_r_type; + as_bad (_("Can not do %d byte %srelocation"), + fixp->fx_size, + fixp->fx_pcrel ? _("pc-relative") : ""); + } + break; + } + + rel = (arelent *) xmalloc (sizeof (arelent)); + rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); + + if (code == BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM) + *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy); + else + *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); + + rel->address = fixp->fx_frag->fr_address + fixp->fx_where; + /* Always pass the addend along! */ + rel->addend = fixp->fx_offset; + rel->howto = bfd_reloc_type_lookup (stdoutput, code); + + if (rel->howto == NULL) + { + as_bad_where (fixp->fx_file, fixp->fx_line, + _("Cannot represent relocation type %s"), + bfd_get_reloc_code_name (code)); + + /* Set howto to a garbage value so that we can keep going. */ + rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); + gas_assert (rel->howto != NULL); + } + return rel; +} + +int +md_parse_option (int c, char * arg ATTRIBUTE_UNUSED) +{ + switch (c) + { + default: + return 0; + } + return 1; +} + +void +md_show_usage (FILE * stream ATTRIBUTE_UNUSED) +{ + /* fprintf(stream, _("\ + MicroBlaze options:\n\ + -noSmall Data in the comm and data sections do not go into the small data section\n")); */ +} + + +/* Create a fixup for a cons expression. If parse_cons_expression_microblaze + found a machine specific op in an expression, + then we create relocs accordingly. */ + +void +cons_fix_new_microblaze (fragS * frag, + int where, + int size, + expressionS *exp) +{ + + bfd_reloc_code_real_type r; + + if ((exp->X_op == O_subtract) && (exp->X_add_symbol) && + (exp->X_op_symbol) && (now_seg != absolute_section) && (size == 4) + && (!S_IS_LOCAL (exp->X_op_symbol))) + r = BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM; + else if (exp->X_md == IMM_GOTOFF && exp->X_op == O_symbol_rva) + { + exp->X_op = O_symbol; + r = BFD_RELOC_MICROBLAZE_32_GOTOFF; + } + else + { + switch (size) + { + case 1: + r = BFD_RELOC_8; + break; + case 2: + r = BFD_RELOC_16; + break; + case 4: + r = BFD_RELOC_32; + break; + case 8: + r = BFD_RELOC_64; + break; + default: + as_bad (_("unsupported BFD relocation size %u"), size); + r = BFD_RELOC_32; + break; + } + } + fix_new_exp (frag, where, size, exp, 0, r); +} |