diff options
Diffstat (limited to 'binutils-2.20.1/gas/doc/c-cris.texi')
-rw-r--r-- | binutils-2.20.1/gas/doc/c-cris.texi | 410 |
1 files changed, 410 insertions, 0 deletions
diff --git a/binutils-2.20.1/gas/doc/c-cris.texi b/binutils-2.20.1/gas/doc/c-cris.texi new file mode 100644 index 0000000..0ef16b9 --- /dev/null +++ b/binutils-2.20.1/gas/doc/c-cris.texi @@ -0,0 +1,410 @@ +@c Copyright 2002, 2004 Free Software Foundation, Inc. +@c This is part of the GAS manual. +@c For copying conditions, see the file as.texinfo. +@c CRIS description contributed by Axis Communications. +@ifset GENERIC +@page +@node CRIS-Dependent +@chapter CRIS Dependent Features +@end ifset +@ifclear GENERIC +@node Machine Dependencies +@chapter CRIS Dependent Features +@end ifclear + +@cindex CRIS support +@menu +* CRIS-Opts:: Command-line Options +* CRIS-Expand:: Instruction expansion +* CRIS-Symbols:: Symbols +* CRIS-Syntax:: Syntax +@end menu + +@node CRIS-Opts +@section Command-line Options + +@cindex options, CRIS +@cindex CRIS options +The CRIS version of @code{@value{AS}} has these +machine-dependent command-line options. + +@cindex @option{--emulation=criself} command line option, CRIS +@cindex @option{--emulation=crisaout} command line option, CRIS +@cindex CRIS @option{--emulation=criself} command line option +@cindex CRIS @option{--emulation=crisaout} command line option + +The format of the generated object files can be either ELF or +a.out, specified by the command-line options +@option{--emulation=crisaout} and @option{--emulation=criself}. +The default is ELF (criself), unless @code{@value{AS}} has been +configured specifically for a.out by using the configuration +name @code{cris-axis-aout}. + +@cindex @option{--underscore} command line option, CRIS +@cindex @option{--no-underscore} command line option, CRIS +@cindex CRIS @option{--underscore} command line option +@cindex CRIS @option{--no-underscore} command line option +There are two different link-incompatible ELF object file +variants for CRIS, for use in environments where symbols are +expected to be prefixed by a leading @samp{_} character and for +environments without such a symbol prefix. The variant used for +GNU/Linux port has no symbol prefix. Which variant to produce +is specified by either of the options @option{--underscore} and +@option{--no-underscore}. The default is @option{--underscore}. +Since symbols in CRIS a.out objects are expected to have a +@samp{_} prefix, specifying @option{--no-underscore} when +generating a.out objects is an error. Besides the object format +difference, the effect of this option is to parse register names +differently (@pxref{crisnous}). The @option{--no-underscore} +option makes a @samp{$} register prefix mandatory. + +@cindex @option{--pic} command line option, CRIS +@cindex CRIS @option{--pic} command line option +@cindex Position-independent code, CRIS +@cindex CRIS position-independent code +The option @option{--pic} must be passed to @code{@value{AS}} in +order to recognize the symbol syntax used for ELF (SVR4 PIC) +position-independent-code (@pxref{crispic}). This will also +affect expansion of instructions. The expansion with +@option{--pic} will use PC-relative rather than (slightly +faster) absolute addresses in those expansions. + +@cindex @option{--march=@var{architecture}} command line option, CRIS +@cindex CRIS @option{--march=@var{architecture}} command line option +@cindex Architecture variant option, CRIS +@cindex CRIS architecture variant option +The option @option{--march=@var{architecture}} +@anchor{march-option}specifies the recognized instruction set +and recognized register names. It also controls the +architecture type of the object file. Valid values for +@var{architecture} are: +@table @code + +@item v0_v10 +All instructions and register names for any architecture variant +in the set v0@dots{}v10 are recognized. This is the +default if the target is configured as cris-*. + +@item v10 +Only instructions and register names for CRIS v10 (as found in +ETRAX 100 LX) are recognized. This is the default if the target +is configured as crisv10-*. + +@item v32 +Only instructions and register names for CRIS v32 (code name +Guinness) are recognized. This is the default if the target is +configured as crisv32-*. This value implies +@option{--no-mul-bug-abort}. (A subsequent +@option{--mul-bug-abort} will turn it back on.) + +@item common_v10_v32 +Only instructions with register names and addressing modes with +opcodes common to the v10 and v32 are recognized. +@end table + +@cindex @option{-N} command line option, CRIS +@cindex CRIS @option{-N} command line option +When @option{-N} is specified, @code{@value{AS}} will emit a +warning when a 16-bit branch instruction is expanded into a +32-bit multiple-instruction construct (@pxref{CRIS-Expand}). + +@cindex @option{--no-mul-bug-abort} command line option, CRIS +@cindex @option{--mul-bug-abort} command line option, CRIS +@cindex CRIS @option{--no-mul-bug-abort} command line option +@cindex CRIS @option{--mul-bug-abort} command line option + +Some versions of the CRIS v10, for example in the Etrax 100 LX, +contain a bug that causes destabilizing memory accesses when a +multiply instruction is executed with certain values in the +first operand just before a cache-miss. When the +@option{--mul-bug-abort} command line option is active (the +default value), @code{@value{AS}} will refuse to assemble a file +containing a multiply instruction at a dangerous offset, one +that could be the last on a cache-line, or is in a section with +insufficient alignment. This placement checking does not catch +any case where the multiply instruction is dangerously placed +because it is located in a delay-slot. The +@option{--mul-bug-abort} command line option turns off the +checking. + +@node CRIS-Expand +@section Instruction expansion + +@cindex instruction expansion, CRIS +@cindex CRIS instruction expansion +@code{@value{AS}} will silently choose an instruction that fits +the operand size for @samp{[register+constant]} operands. For +example, the offset @code{127} in @code{move.d [r3+127],r4} fits +in an instruction using a signed-byte offset. Similarly, +@code{move.d [r2+32767],r1} will generate an instruction using a +16-bit offset. For symbolic expressions and constants that do +not fit in 16 bits including the sign bit, a 32-bit offset is +generated. + +For branches, @code{@value{AS}} will expand from a 16-bit branch +instruction into a sequence of instructions that can reach a +full 32-bit address. Since this does not correspond to a single +instruction, such expansions can optionally be warned about. +@xref{CRIS-Opts}. + +If the operand is found to fit the range, a @code{lapc} mnemonic +will translate to a @code{lapcq} instruction. Use @code{lapc.d} +to force the 32-bit @code{lapc} instruction. + +Similarly, the @code{addo} mnemonic will translate to the +shortest fitting instruction of @code{addoq}, @code{addo.w} and +@code{addo.d}, when used with a operand that is a constant known +at assembly time. + +@node CRIS-Symbols +@section Symbols +@cindex Symbols, built-in, CRIS +@cindex Symbols, CRIS, built-in +@cindex CRIS built-in symbols +@cindex Built-in symbols, CRIS + +Some symbols are defined by the assembler. They're intended to +be used in conditional assembly, for example: +@smallexample + .if ..asm.arch.cris.v32 + @var{code for CRIS v32} + .elseif ..asm.arch.cris.common_v10_v32 + @var{code common to CRIS v32 and CRIS v10} + .elseif ..asm.arch.cris.v10 | ..asm.arch.cris.any_v0_v10 + @var{code for v10} + .else + .error "Code needs to be added here." + .endif +@end smallexample + +These symbols are defined in the assembler, reflecting +command-line options, either when specified or the default. +They are always defined, to 0 or 1. +@table @code + +@item ..asm.arch.cris.any_v0_v10 +This symbol is non-zero when @option{--march=v0_v10} is specified +or the default. + +@item ..asm.arch.cris.common_v10_v32 +Set according to the option @option{--march=common_v10_v32}. + +@item ..asm.arch.cris.v10 +Reflects the option @option{--march=v10}. + +@item ..asm.arch.cris.v32 +Corresponds to @option{--march=v10}. +@end table + +Speaking of symbols, when a symbol is used in code, it can have +a suffix modifying its value for use in position-independent +code. @xref{CRIS-Pic}. + +@node CRIS-Syntax +@section Syntax + +There are different aspects of the CRIS assembly syntax. + +@menu +* CRIS-Chars:: Special Characters +* CRIS-Pic:: Position-Independent Code Symbols +* CRIS-Regs:: Register Names +* CRIS-Pseudos:: Assembler Directives +@end menu + +@node CRIS-Chars +@subsection Special Characters +@cindex line comment characters, CRIS +@cindex CRIS line comment characters + +The character @samp{#} is a line comment character. It starts a +comment if and only if it is placed at the beginning of a line. + +A @samp{;} character starts a comment anywhere on the line, +causing all characters up to the end of the line to be ignored. + +A @samp{@@} character is handled as a line separator equivalent +to a logical new-line character (except in a comment), so +separate instructions can be specified on a single line. + +@node CRIS-Pic +@subsection Symbols in position-independent code +@cindex Symbols in position-independent code, CRIS +@cindex CRIS symbols in position-independent code +@cindex Position-independent code, symbols in, CRIS + +When generating @anchor{crispic}position-independent code (SVR4 +PIC) for use in cris-axis-linux-gnu or crisv32-axis-linux-gnu +shared libraries, symbol +suffixes are used to specify what kind of run-time symbol lookup +will be used, expressed in the object as different +@emph{relocation types}. Usually, all absolute symbol values +must be located in a table, the @emph{global offset table}, +leaving the code position-independent; independent of values of +global symbols and independent of the address of the code. The +suffix modifies the value of the symbol, into for example an +index into the global offset table where the real symbol value +is entered, or a PC-relative value, or a value relative to the +start of the global offset table. All symbol suffixes start +with the character @samp{:} (omitted in the list below). Every +symbol use in code or a read-only section must therefore have a +PIC suffix to enable a useful shared library to be created. +Usually, these constructs must not be used with an additive +constant offset as is usually allowed, i.e.@: no 4 as in +@code{symbol + 4} is allowed. This restriction is checked at +link-time, not at assembly-time. + +@table @code +@item GOT + +Attaching this suffix to a symbol in an instruction causes the +symbol to be entered into the global offset table. The value is +a 32-bit index for that symbol into the global offset table. +The name of the corresponding relocation is +@samp{R_CRIS_32_GOT}. Example: @code{move.d +[$r0+extsym:GOT],$r9} + +@item GOT16 + +Same as for @samp{GOT}, but the value is a 16-bit index into the +global offset table. The corresponding relocation is +@samp{R_CRIS_16_GOT}. Example: @code{move.d +[$r0+asymbol:GOT16],$r10} + +@item PLT + +This suffix is used for function symbols. It causes a +@emph{procedure linkage table}, an array of code stubs, to be +created at the time the shared object is created or linked +against, together with a global offset table entry. The value +is a pc-relative offset to the corresponding stub code in the +procedure linkage table. This arrangement causes the run-time +symbol resolver to be called to look up and set the value of the +symbol the first time the function is called (at latest; +depending environment variables). It is only safe to leave the +symbol unresolved this way if all references are function calls. +The name of the relocation is @samp{R_CRIS_32_PLT_PCREL}. +Example: @code{add.d fnname:PLT,$pc} + +@item PLTG + +Like PLT, but the value is relative to the beginning of the +global offset table. The relocation is +@samp{R_CRIS_32_PLT_GOTREL}. Example: @code{move.d +fnname:PLTG,$r3} + +@item GOTPLT + +Similar to @samp{PLT}, but the value of the symbol is a 32-bit +index into the global offset table. This is somewhat of a mix +between the effect of the @samp{GOT} and the @samp{PLT} suffix; +the difference to @samp{GOT} is that there will be a procedure +linkage table entry created, and that the symbol is assumed to +be a function entry and will be resolved by the run-time +resolver as with @samp{PLT}. The relocation is +@samp{R_CRIS_32_GOTPLT}. Example: @code{jsr +[$r0+fnname:GOTPLT]} + +@item GOTPLT16 + +A variant of @samp{GOTPLT} giving a 16-bit value. Its +relocation name is @samp{R_CRIS_16_GOTPLT}. Example: @code{jsr +[$r0+fnname:GOTPLT16]} + +@item GOTOFF + +This suffix must only be attached to a local symbol, but may be +used in an expression adding an offset. The value is the +address of the symbol relative to the start of the global offset +table. The relocation name is @samp{R_CRIS_32_GOTREL}. +Example: @code{move.d [$r0+localsym:GOTOFF],r3} +@end table + +@node CRIS-Regs +@subsection Register names +@cindex register names, CRIS +@cindex CRIS register names + +A @samp{$} character may always prefix a general or special +register name in an instruction operand but is mandatory when +the option @option{--no-underscore} is specified or when the +@code{.syntax register_prefix} directive is in effect +(@pxref{crisnous}). Register names are case-insensitive. + +@node CRIS-Pseudos +@subsection Assembler Directives +@cindex assembler directives, CRIS +@cindex pseudo-ops, CRIS +@cindex CRIS assembler directives +@cindex CRIS pseudo-ops + +There are a few CRIS-specific pseudo-directives in addition to +the generic ones. @xref{Pseudo Ops}. Constants emitted by +pseudo-directives are in little-endian order for CRIS. There is +no support for floating-point-specific directives for CRIS. + +@table @code +@item .dword EXPRESSIONS +@cindex assembler directive .dword, CRIS +@cindex pseudo-op .dword, CRIS +@cindex CRIS assembler directive .dword +@cindex CRIS pseudo-op .dword + +The @code{.dword} directive is a synonym for @code{.int}, +expecting zero or more EXPRESSIONS, separated by commas. For +each expression, a 32-bit little-endian constant is emitted. + +@item .syntax ARGUMENT +@cindex assembler directive .syntax, CRIS +@cindex pseudo-op .syntax, CRIS +@cindex CRIS assembler directive .syntax +@cindex CRIS pseudo-op .syntax +The @code{.syntax} directive takes as @var{ARGUMENT} one of the +following case-sensitive choices. + +@table @code +@item no_register_prefix + +The @code{.syntax no_register_prefix} @anchor{crisnous}directive +makes a @samp{$} character prefix on all registers optional. It +overrides a previous setting, including the corresponding effect +of the option @option{--no-underscore}. If this directive is +used when ordinary symbols do not have a @samp{_} character +prefix, care must be taken to avoid ambiguities whether an +operand is a register or a symbol; using symbols with names the +same as general or special registers then invoke undefined +behavior. + +@item register_prefix + +This directive makes a @samp{$} character prefix on all +registers mandatory. It overrides a previous setting, including +the corresponding effect of the option @option{--underscore}. + +@item leading_underscore + +This is an assertion directive, emitting an error if the +@option{--no-underscore} option is in effect. + +@item no_leading_underscore + +This is the opposite of the @code{.syntax leading_underscore} +directive and emits an error if the option @option{--underscore} +is in effect. +@end table + +@item .arch ARGUMENT +@cindex assembler directive .arch, CRIS +@cindex pseudo-op .arch, CRIS +@cindex CRIS assembler directive .arch +@cindex CRIS pseudo-op .arch +This is an assertion directive, giving an error if the specified +@var{ARGUMENT} is not the same as the specified or default value +for the @option{--march=@var{architecture}} option +(@pxref{march-option}). + +@c If you compare with md_pseudo_table, you see that we don't +@c document ".file" and ".loc" here. This is because we're just +@c wrapping the corresponding ELF function and emitting an error for +@c a.out. +@end table |