diff options
author | wdenk <wdenk> | 2003-05-18 11:30:09 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-05-18 11:30:09 +0000 |
commit | 66fd3d1ce732d9168d6a056986231ada8dfa500e (patch) | |
tree | 4b0d3f9094ef6525c631baf01268d21317496e81 | |
parent | 45219c46605f9b933ab454738ee4ce543d5b70d6 (diff) | |
download | bootable_bootloader_goldelico_gta04-66fd3d1ce732d9168d6a056986231ada8dfa500e.zip bootable_bootloader_goldelico_gta04-66fd3d1ce732d9168d6a056986231ada8dfa500e.tar.gz bootable_bootloader_goldelico_gta04-66fd3d1ce732d9168d6a056986231ada8dfa500e.tar.bz2 |
Add support for CompactFlash on ATC board
(includes support for Intel 82365 and compatible PC Card controllers,
and Yenta-compatible PCI-to-CardBus controllers)
-rw-r--r-- | CHANGELOG | 4 | ||||
-rw-r--r-- | board/atc/atc.c | 12 | ||||
-rw-r--r-- | common/cmd_pcmcia.c | 55 | ||||
-rw-r--r-- | cpu/mpc8260/pci.c | 4 | ||||
-rw-r--r-- | drivers/Makefile | 4 | ||||
-rw-r--r-- | drivers/i82365.c | 590 | ||||
-rw-r--r-- | drivers/pci_indirect.c | 2 | ||||
-rw-r--r-- | include/configs/TQM860L.h | 1 | ||||
-rw-r--r-- | include/configs/atc.h | 49 | ||||
-rw-r--r-- | include/pci_ids.h | 1 | ||||
-rw-r--r-- | include/pcmcia.h | 2 | ||||
-rw-r--r-- | include/pcmcia/i82365.h | 154 | ||||
-rw-r--r-- | include/pcmcia/ss.h | 133 | ||||
-rw-r--r-- | include/pcmcia/ti113x.h | 234 | ||||
-rw-r--r-- | include/pcmcia/yenta.h | 156 |
15 files changed, 1391 insertions, 10 deletions
@@ -2,6 +2,10 @@ Changes since U-Boot 0.3.1: ====================================================================== +* Add support for CompactFlash on ATC board + (includes support for Intel 82365 and compatible PC Card controllers, + and Yenta-compatible PCI-to-CardBus controllers) + * Patch by Mathijs Haarman, 08 May 2003: Add lan91c96 driver (tested on Lubbock and custom PXA250 board only) diff --git a/board/atc/atc.c b/board/atc/atc.c index 3547f41..21ed2b0 100644 --- a/board/atc/atc.c +++ b/board/atc/atc.c @@ -24,6 +24,7 @@ #include <common.h> #include <ioports.h> #include <mpc8260.h> +#include <pci.h> /* * I/O Port configuration table @@ -364,3 +365,14 @@ void doc_init (void) doc_probe (CFG_DOC_BASE); } #endif + +#ifdef CONFIG_PCI +struct pci_controller hose; + +extern void pci_mpc8250_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc8250_init(&hose); +} +#endif diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index c009156..cb7600c 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -72,16 +72,20 @@ int pcmcia_on (void); #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) static int pcmcia_off (void); +#endif + +#ifdef CONFIG_I82365 + +extern int i82365_init (void); +extern void i82365_exit (void); + +#else /* ! CONFIG_I82365 */ + +#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) static int hardware_disable(int slot); #endif static int hardware_enable (int slot); static int voltage_set(int slot, int vcc, int vpp); -#ifdef CONFIG_IDE_8xx_PCCARD -static void print_funcid (int func); -static void print_fixed (volatile uchar *p); -static int identify (volatile uchar *p); -static int check_ide_device (int slot); -#endif /* CONFIG_IDE_8xx_PCCARD */ static u_int m8xx_get_graycode(u_int size); #if 0 @@ -99,6 +103,15 @@ static u_int *pcmcia_pgcrx[2] = { #define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot]) +#endif /* CONFIG_I82365 */ + +#ifdef CONFIG_IDE_8xx_PCCARD +static void print_funcid (int func); +static void print_fixed (volatile uchar *p); +static int identify (volatile uchar *p); +static int check_ide_device (int slot); +#endif /* CONFIG_IDE_8xx_PCCARD */ + const char *indent = "\t "; /* -------------------------------------------------------------------- */ @@ -128,6 +141,24 @@ int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* -------------------------------------------------------------------- */ +#ifdef CONFIG_I82365 +int pcmcia_on (void) +{ + u_int rc; + + debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n"); + + rc = i82365_init(); + + if (rc == 0) + { + rc = check_ide_device(0); + } + + return (rc); +} +#else + #if defined(CONFIG_LWMON) # define CFG_PCMCIA_TIMING (PCMCIA_SHT(9) | PCMCIA_SST(3) | PCMCIA_SL(12)) #else @@ -222,11 +253,22 @@ int pcmcia_on (void) } return (rc); } +#endif /* CONFIG_I82365 */ /* -------------------------------------------------------------------- */ #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) +#ifdef CONFIG_I82365 +static int pcmcia_off (void) +{ + printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n"); + + i82365_exit(); + + return 0; +} +#else static int pcmcia_off (void) { int i; @@ -258,6 +300,7 @@ static int pcmcia_off (void) hardware_disable(_slot_); return 0; } +#endif /* CONFIG_I82365 */ #endif /* CFG_CMD_PCMCIA */ diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c index f9f1e27..b7a04d5 100644 --- a/cpu/mpc8260/pci.c +++ b/cpu/mpc8260/pci.c @@ -95,7 +95,11 @@ */ #define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */ +#ifdef CONFIG_ATC +#define PCI_MSTR_IO_BUS 0x00000000 /* PCI base */ +#else #define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */ +#endif #define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL #define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */ #define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO) diff --git a/drivers/Makefile b/drivers/Makefile index 2101a27..c28ed9f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -30,8 +30,8 @@ LIB = libdrivers.a OBJS = 3c589.o 5701rls.o at91rm9200_ether.o \ bcm570x.o bcm570x_autoneg.o \ cfb_console.o cs8900.o ct69000.o dc2114x.o \ - eepro100.o i8042.o inca-ip_sw.o lan91c96.o\ - natsemi.o ns16550.o ns8382x.o ns87308.o \ + eepro100.o i8042.o i82365.o inca-ip_sw.o \ + lan91c96.o natsemi.o ns16550.o ns8382x.o ns87308.o \ pci.o pci_auto.o pci_indirect.o \ pcnet.o plb2800_eth.o \ s3c24x0_i2c.o sed13806.o serial.o \ diff --git a/drivers/i82365.c b/drivers/i82365.c new file mode 100644 index 0000000..81736b9 --- /dev/null +++ b/drivers/i82365.c @@ -0,0 +1,590 @@ +/* + * (C) Copyright 2003 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + ******************************************************************** + * + * Lots of code copied from: + * + * i82365.c 1.352 - Linux driver for Intel 82365 and compatible + * PC Card controllers, and Yenta-compatible PCI-to-CardBus controllers. + * (C) 1999 David A. Hinds <dahinds@users.sourceforge.net> + */ + +#include <common.h> + +#ifdef CONFIG_I82365 + +#include <command.h> +#include <pci.h> +#include <pcmcia.h> +#include <cmd_pcmcia.h> +#include <asm/io.h> + +#include <pcmcia/ss.h> +#include <pcmcia/i82365.h> +#include <pcmcia/ti113x.h> +#include <pcmcia/yenta.h> + +/* #define DEBUG */ + +static struct pci_device_id supported[] = { + {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510}, + {0, 0} +}; + +#define CYCLE_TIME 120 + +#ifdef DEBUG +static void i82365_dump_regions (pci_dev_t dev); +#endif + +typedef struct socket_info_t { + pci_dev_t dev; + u_short bcr; + u_char pci_lat, cb_lat, sub_bus, cache; + u_int cb_phys; + + socket_cap_t cap; + ti113x_state_t state; +} socket_info_t; + +static socket_info_t socket; +static socket_state_t state; +static struct pccard_mem_map mem; +static struct pccard_io_map io; + +/*====================================================================*/ + +/* Some PCI shortcuts */ + +static int pci_readb (socket_info_t * s, int r, u_char * v) +{ + return pci_read_config_byte (s->dev, r, v); +} +static int pci_writeb (socket_info_t * s, int r, u_char v) +{ + return pci_write_config_byte (s->dev, r, v); +} +static int pci_readw (socket_info_t * s, int r, u_short * v) +{ + return pci_read_config_word (s->dev, r, v); +} +static int pci_writew (socket_info_t * s, int r, u_short v) +{ + return pci_write_config_word (s->dev, r, v); +} +static int pci_readl (socket_info_t * s, int r, u_int * v) +{ + return pci_read_config_dword (s->dev, r, v); +} +static int pci_writel (socket_info_t * s, int r, u_int v) +{ + return pci_write_config_dword (s->dev, r, v); +} + +#define cb_readb(s, r) readb((s)->cb_phys + (r)) +#define cb_readl(s, r) readl((s)->cb_phys + (r)) +#define cb_writeb(s, r, v) writeb(v, (s)->cb_phys + (r)) +#define cb_writel(s, r, v) writel(v, (s)->cb_phys + (r)) + +/*====================================================================*/ + +static u_char i365_get (socket_info_t * s, u_short reg) +{ + return cb_readb (s, 0x0800 + reg); +} + +static void i365_set (socket_info_t * s, u_short reg, u_char data) +{ + cb_writeb (s, 0x0800 + reg, data); +} + +static void i365_bset (socket_info_t * s, u_short reg, u_char mask) +{ + i365_set (s, reg, i365_get (s, reg) | mask); +} + +static void i365_bclr (socket_info_t * s, u_short reg, u_char mask) +{ + i365_set (s, reg, i365_get (s, reg) & ~mask); +} + +#if 0 /* not used */ +static void i365_bflip (socket_info_t * s, u_short reg, u_char mask, int b) +{ + u_char d = i365_get (s, reg); + + i365_set (s, reg, (b) ? (d | mask) : (d & ~mask)); +} + +static u_short i365_get_pair (socket_info_t * s, u_short reg) +{ + return (i365_get (s, reg) + (i365_get (s, reg + 1) << 8)); +} +#endif /* not used */ + +static void i365_set_pair (socket_info_t * s, u_short reg, u_short data) +{ + i365_set (s, reg, data & 0xff); + i365_set (s, reg + 1, data >> 8); +} + +/*====================================================================== + + Code to save and restore global state information for TI 1130 and + TI 1131 controllers, and to set and report global configuration + options. + +======================================================================*/ + +static void ti113x_get_state (socket_info_t * s) +{ + ti113x_state_t *p = &s->state; + + pci_readl (s, TI113X_SYSTEM_CONTROL, &p->sysctl); + pci_readb (s, TI113X_CARD_CONTROL, &p->cardctl); + pci_readb (s, TI113X_DEVICE_CONTROL, &p->devctl); + pci_readb (s, TI1250_DIAGNOSTIC, &p->diag); + pci_readl (s, TI12XX_IRQMUX, &p->irqmux); +} + +static void ti113x_set_state (socket_info_t * s) +{ + ti113x_state_t *p = &s->state; + + pci_writel (s, TI113X_SYSTEM_CONTROL, p->sysctl); + pci_writeb (s, TI113X_CARD_CONTROL, p->cardctl); + pci_writeb (s, TI113X_DEVICE_CONTROL, p->devctl); + pci_writeb (s, TI1250_MULTIMEDIA_CTL, 0); + pci_writeb (s, TI1250_DIAGNOSTIC, p->diag); + pci_writel (s, TI12XX_IRQMUX, p->irqmux); + i365_set_pair (s, TI113X_IO_OFFSET (0), 0); + i365_set_pair (s, TI113X_IO_OFFSET (1), 0); +} + +static u_int ti113x_set_opts (socket_info_t * s) +{ + ti113x_state_t *p = &s->state; + u_int mask = 0xffff; + + p->cardctl &= ~TI113X_CCR_ZVENABLE; + p->cardctl |= TI113X_CCR_SPKROUTEN; + + return mask; +} + +/*====================================================================== + + Routines to handle common CardBus options + +======================================================================*/ + +/* Default settings for PCI command configuration register */ +#define CMD_DFLT (PCI_COMMAND_IO|PCI_COMMAND_MEMORY| \ + PCI_COMMAND_MASTER|PCI_COMMAND_WAIT) + +static void cb_get_state (socket_info_t * s) +{ + pci_readb (s, PCI_CACHE_LINE_SIZE, &s->cache); + pci_readb (s, PCI_LATENCY_TIMER, &s->pci_lat); + pci_readb (s, CB_LATENCY_TIMER, &s->cb_lat); + pci_readb (s, CB_CARDBUS_BUS, &s->cap.cardbus); + pci_readb (s, CB_SUBORD_BUS, &s->sub_bus); + pci_readw (s, CB_BRIDGE_CONTROL, &s->bcr); +} + +static void cb_set_state (socket_info_t * s) +{ + pci_writel (s, CB_LEGACY_MODE_BASE, 0); + pci_writel (s, PCI_BASE_ADDRESS_0, s->cb_phys); + pci_writew (s, PCI_COMMAND, CMD_DFLT); + pci_writeb (s, PCI_CACHE_LINE_SIZE, s->cache); + pci_writeb (s, PCI_LATENCY_TIMER, s->pci_lat); + pci_writeb (s, CB_LATENCY_TIMER, s->cb_lat); + pci_writeb (s, CB_CARDBUS_BUS, s->cap.cardbus); + pci_writeb (s, CB_SUBORD_BUS, s->sub_bus); + pci_writew (s, CB_BRIDGE_CONTROL, s->bcr); +} + +static void cb_set_opts (socket_info_t * s) +{ + if (s->cache == 0) + s->cache = 8; + if (s->pci_lat == 0) + s->pci_lat = 0xa8; + if (s->cb_lat == 0) + s->cb_lat = 0xb0; +} + +/*====================================================================== + + Power control for Cardbus controllers: used both for 16-bit and + Cardbus cards. + +======================================================================*/ + +static int cb_set_power (socket_info_t * s, socket_state_t * state) +{ + u_int reg = 0; + + /* restart card voltage detection if it seems appropriate */ + if ((state->Vcc == 0) && (state->Vpp == 0) && + !(cb_readl (s, CB_SOCKET_STATE) & CB_SS_VSENSE)) + cb_writel (s, CB_SOCKET_FORCE, CB_SF_CVSTEST); + switch (state->Vcc) { + case 0: + reg = 0; + break; + case 33: + reg = CB_SC_VCC_3V; + break; + case 50: + reg = CB_SC_VCC_5V; + break; + default: + return -1; + } + switch (state->Vpp) { + case 0: + break; + case 33: + reg |= CB_SC_VPP_3V; + break; + case 50: + reg |= CB_SC_VPP_5V; + break; + case 120: + reg |= CB_SC_VPP_12V; + break; + default: + return -1; + } + if (reg != cb_readl (s, CB_SOCKET_CONTROL)) + cb_writel (s, CB_SOCKET_CONTROL, reg); + return 0; +} + +/*====================================================================== + + Generic routines to get and set controller options + +======================================================================*/ + +static void get_bridge_state (socket_info_t * s) +{ + ti113x_get_state (s); + cb_get_state (s); +} + +static void set_bridge_state (socket_info_t * s) +{ + cb_set_state (s); + i365_set (s, I365_GBLCTL, 0x00); + i365_set (s, I365_GENCTL, 0x00); + ti113x_set_state (s); +} + +static void set_bridge_opts (socket_info_t * s) +{ + ti113x_set_opts (s); + cb_set_opts (s); +} + +/*====================================================================*/ + +static int i365_get_status (socket_info_t * s, u_int * value) +{ + u_int status; + + status = i365_get (s, I365_STATUS); + *value = ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0; + if (i365_get (s, I365_INTCTL) & I365_PC_IOCARD) { + *value |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG; + } else { + *value |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD; + *value |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN; + } + *value |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0; + *value |= (status & I365_CS_READY) ? SS_READY : 0; + *value |= (status & I365_CS_POWERON) ? SS_POWERON : 0; + + status = cb_readl (s, CB_SOCKET_STATE); + *value |= (status & CB_SS_32BIT) ? SS_CARDBUS : 0; + *value |= (status & CB_SS_3VCARD) ? SS_3VCARD : 0; + *value |= (status & CB_SS_XVCARD) ? SS_XVCARD : 0; + *value |= (status & CB_SS_VSENSE) ? 0 : SS_PENDING; + /* For now, ignore cards with unsupported voltage keys */ + if (*value & SS_XVCARD) + *value &= ~(SS_DETECT | SS_3VCARD | SS_XVCARD); + + return 0; +} /* i365_get_status */ + +static int i365_set_socket (socket_info_t * s, socket_state_t * state) +{ + u_char reg; + + set_bridge_state (s); + + /* IO card, RESET flag */ + reg = 0; + reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET; + reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0; + i365_set (s, I365_INTCTL, reg); + + reg = I365_PWR_NORESET; + if (state->flags & SS_PWR_AUTO) + reg |= I365_PWR_AUTO; + if (state->flags & SS_OUTPUT_ENA) + reg |= I365_PWR_OUT; + + cb_set_power (s, state); + reg |= i365_get (s, I365_POWER) & (I365_VCC_MASK | I365_VPP1_MASK); + + if (reg != i365_get (s, I365_POWER)) + i365_set (s, I365_POWER, reg); + + return 0; +} /* i365_set_socket */ + +/*====================================================================*/ + +static int i365_set_mem_map (socket_info_t * s, struct pccard_mem_map *mem) +{ + u_short base, i; + u_char map; + + map = mem->map; + if ((map > 4) || + (mem->card_start > 0x3ffffff) || + (mem->sys_start > mem->sys_stop) || + (mem->speed > 1000)) { + return -1; + } + + /* Turn off the window before changing anything */ + if (i365_get (s, I365_ADDRWIN) & I365_ENA_MEM (map)) + i365_bclr (s, I365_ADDRWIN, I365_ENA_MEM (map)); + + /* Take care of high byte, for PCI controllers */ + i365_set (s, CB_MEM_PAGE (map), mem->sys_start >> 24); + + base = I365_MEM (map); + i = (mem->sys_start >> 12) & 0x0fff; + if (mem->flags & MAP_16BIT) + i |= I365_MEM_16BIT; + if (mem->flags & MAP_0WS) + i |= I365_MEM_0WS; + i365_set_pair (s, base + I365_W_START, i); + + i = (mem->sys_stop >> 12) & 0x0fff; + switch (mem->speed / CYCLE_TIME) { + case 0: + break; + case 1: + i |= I365_MEM_WS0; + break; + case 2: + i |= I365_MEM_WS1; + break; + default: + i |= I365_MEM_WS1 | I365_MEM_WS0; + break; + } + i365_set_pair (s, base + I365_W_STOP, i); + + i = ((mem->card_start - mem->sys_start) >> 12) & 0x3fff; + if (mem->flags & MAP_WRPROT) + i |= I365_MEM_WRPROT; + if (mem->flags & MAP_ATTRIB) + i |= I365_MEM_REG; + i365_set_pair (s, base + I365_W_OFF, i); + + /* Turn on the window if necessary */ + if (mem->flags & MAP_ACTIVE) + i365_bset (s, I365_ADDRWIN, I365_ENA_MEM (map)); + return 0; +} /* i365_set_mem_map */ + +static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io) +{ + u_char map, ioctl; + + map = io->map; + if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) || + (io->stop < io->start)) + return -1; + /* Turn off the window before changing anything */ + if (i365_get (s, I365_ADDRWIN) & I365_ENA_IO (map)) + i365_bclr (s, I365_ADDRWIN, I365_ENA_IO (map)); + i365_set_pair (s, I365_IO (map) + I365_W_START, io->start); + i365_set_pair (s, I365_IO (map) + I365_W_STOP, io->stop); + ioctl = i365_get (s, I365_IOCTL) & ~I365_IOCTL_MASK (map); + if (io->speed) + ioctl |= I365_IOCTL_WAIT (map); + if (io->flags & MAP_0WS) + ioctl |= I365_IOCTL_0WS (map); + if (io->flags & MAP_16BIT) + ioctl |= I365_IOCTL_16BIT (map); + if (io->flags & MAP_AUTOSZ) + ioctl |= I365_IOCTL_IOCS16 (map); + i365_set (s, I365_IOCTL, ioctl); + /* Turn on the window if necessary */ + if (io->flags & MAP_ACTIVE) + i365_bset (s, I365_ADDRWIN, I365_ENA_IO (map)); + return 0; +} /* i365_set_io_map */ + +/*====================================================================*/ + +int i82365_init (void) +{ + u_int val; + int i; + + if ((socket.dev = pci_find_devices (supported, 0)) < 0) { + /* Controller not found */ + return 1; + } + + pci_read_config_dword (socket.dev, PCI_BASE_ADDRESS_0, &socket.cb_phys); + socket.cb_phys &= ~0xf; + + get_bridge_state (&socket); + set_bridge_opts (&socket); + + i365_get_status (&socket, &val); + + if (val & SS_DETECT) { + if (val & SS_3VCARD) { + state.Vcc = state.Vpp = 33; + puts (" 3.3V card found: "); + } else if (!(val & SS_XVCARD)) { + state.Vcc = state.Vpp = 50; + puts (" 5.0V card found: "); + } else { + printf ("i82365: unsupported voltage key\n"); + state.Vcc = state.Vpp = 0; + } + } else { + /* No card inserted */ + return 1; + } + + state.flags = SS_IOCARD | SS_OUTPUT_ENA; + state.csc_mask = 0; + state.io_irq = 0; + + i365_set_socket (&socket, &state); + + for (i = 500; i; i--) { + if ((i365_get (&socket, I365_STATUS) & I365_CS_READY)) + break; + udelay (1000); + } + + if (i == 0) { + /* PC Card not ready for data transfer */ + return 1; + } + + mem.map = 0; + mem.flags = MAP_ATTRIB | MAP_ACTIVE; + mem.speed = 300; + mem.sys_start = CFG_PCMCIA_MEM_ADDR; + mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1; + mem.card_start = 0; + + i365_set_mem_map (&socket, &mem); + + io.map = 0; + io.flags = MAP_AUTOSZ | MAP_ACTIVE; + io.speed = 0; + io.start = 0x0100; + io.stop = 0x010F; + + i365_set_io_map (&socket, &io); + +#ifdef DEBUG + i82365_dump_regions (socket.dev); +#endif + + return 0; +} + +void i82365_exit (void) +{ + io.map = 0; + io.flags = 0; + io.speed = 0; + io.start = 0; + io.stop = 0x1; + + i365_set_io_map (&socket, &io); + + mem.map = 0; + mem.flags = 0; + mem.speed = 0; + mem.sys_start = 0; + mem.sys_stop = 0x1000; + mem.card_start = 0; + + i365_set_mem_map (&socket, &mem); + + socket.state.sysctl &= 0xFFFF00FF; + + state.Vcc = state.Vpp = 0; + + i365_set_socket (&socket, &state); +} + +/*====================================================================== + + Debug stuff + +======================================================================*/ + +#ifdef DEBUG +static void i82365_dump_regions (pci_dev_t dev) +{ + u_int tmp[2]; + u_int *mem = (void *) sock.cb_phys; + u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR; + u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET); + + pci_read_config_dword (dev, 0x00, tmp + 0); + pci_read_config_dword (dev, 0x80, tmp + 1); + + printf ("PCI CONF: %08X ... %08X\n", tmp[0], tmp[1]); + printf ("PCI MEM: ... %08X ... %08X\n", mem[0x8 / 4], mem[0x800 / 4]); + printf ("CIS: ...%c%c%c%c%c%c%c%c...\n", + cis[0x38], cis[0x3a], cis[0x3c], cis[0x3e], + cis[0x40], cis[0x42], cis[0x44], cis[0x48]); + printf ("CIS CONF: %02X %02X %02X ...\n", + cis[0x200], cis[0x202], cis[0x204]); + printf ("IDE: %02X %02X %02X %02X %02X %02X %02X %02X\n", + ide[0], ide[1], ide[2], ide[3], + ide[4], ide[5], ide[6], ide[7]); +} +#endif /* DEBUG */ + +#endif /* CONFIG_I82365 */ diff --git a/drivers/pci_indirect.c b/drivers/pci_indirect.c index f7b4422..fdf4d13 100644 --- a/drivers/pci_indirect.c +++ b/drivers/pci_indirect.c @@ -21,7 +21,7 @@ #define cfg_read(val, addr, type, op) *val = op((type)(addr)) #define cfg_write(val, addr, type, op) op((type *)(addr), (val)) -#ifdef CONFIG_PM826 +#if defined(CONFIG_PM826) || defined(CONFIG_ATC) #define INDIRECT_PCI_OP(rw, size, type, op, mask) \ static int \ indirect_##rw##_config_##size(struct pci_controller *hose, \ diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h index 0d0b8c3..a9d1aff 100644 --- a/include/configs/TQM860L.h +++ b/include/configs/TQM860L.h @@ -92,6 +92,7 @@ #define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \ CFG_CMD_ASKENV | \ CFG_CMD_DHCP | \ + CFG_CMD_ELF | \ CFG_CMD_IDE | \ CFG_CMD_DATE ) diff --git a/include/configs/atc.h b/include/configs/atc.h index 0651ede..4f30847 100644 --- a/include/configs/atc.h +++ b/include/configs/atc.h @@ -125,7 +125,12 @@ #define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE) -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_EEPROM) +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_EEPROM | \ + CFG_CMD_PCI | \ + CFG_CMD_PCMCIA | \ + CFG_CMD_IDE) +#define CONFIG_DOS_PARTITION /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -149,6 +154,8 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_PIO_MODE 0 /* IDE interface in PIO Mode 0 */ + #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -239,6 +246,9 @@ # define CFG_RAMBOOT #endif +#define CONFIG_PCI +#define CONFIG_PCI_PNP + #if 1 /* environment is in Flash */ #define CFG_ENV_IS_IN_FLASH 1 @@ -441,4 +451,41 @@ #define CFG_PSDMR CFG_PSDMR_8COL #endif /* CFG_RAMBOOT */ +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CONFIG_I82365 + +#define CFG_PCMCIA_MEM_ADDR 0x81000000 +#define CFG_PCMCIA_MEM_SIZE 0x1000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR 0xa0000000 + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET 0x100 + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET 0x100 + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET 0x108 + #endif /* __CONFIG_H */ diff --git a/include/pci_ids.h b/include/pci_ids.h index 87de6a9..f4fc52f 100644 --- a/include/pci_ids.h +++ b/include/pci_ids.h @@ -439,6 +439,7 @@ #define PCI_DEVICE_ID_TI_1211 0xac1e #define PCI_DEVICE_ID_TI_1251B 0xac1f #define PCI_DEVICE_ID_TI_1420 0xac51 +#define PCI_DEVICE_ID_TI_1510 0xac56 #define PCI_VENDOR_ID_SONY 0x104d #define PCI_DEVICE_ID_SONY_CXD3222 0x8039 diff --git a/include/pcmcia.h b/include/pcmcia.h index 16653f3..1609632 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -62,6 +62,8 @@ # define CONFIG_PCMCIA_SLOT_B #elif defined(CONFIG_R360MPI) /* The R360MPI use SLOT_B */ # define CONFIG_PCMCIA_SLOT_B +#elif defined(CONFIG_ATC) /* The ATC use SLOT_A */ +# define CONFIG_PCMCIA_SLOT_A #else # error "PCMCIA Slot not configured" #endif diff --git a/include/pcmcia/i82365.h b/include/pcmcia/i82365.h new file mode 100644 index 0000000..27ee583 --- /dev/null +++ b/include/pcmcia/i82365.h @@ -0,0 +1,154 @@ +/* + * i82365.h 1.21 2001/08/24 12:15:33 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_I82365_H +#define _LINUX_I82365_H + +/* register definitions for the Intel 82365SL PCMCIA controller */ + +/* Offsets for PCIC registers */ +#define I365_IDENT 0x00 /* Identification and revision */ +#define I365_STATUS 0x01 /* Interface status */ +#define I365_POWER 0x02 /* Power and RESETDRV control */ +#define I365_INTCTL 0x03 /* Interrupt and general control */ +#define I365_CSC 0x04 /* Card status change */ +#define I365_CSCINT 0x05 /* Card status change interrupt control */ +#define I365_ADDRWIN 0x06 /* Address window enable */ +#define I365_IOCTL 0x07 /* I/O control */ +#define I365_GENCTL 0x16 /* Card detect and general control */ +#define I365_GBLCTL 0x1E /* Global control register */ + +/* Offsets for I/O and memory window registers */ +#define I365_IO(map) (0x08+((map)<<2)) +#define I365_MEM(map) (0x10+((map)<<3)) +#define I365_W_START 0 +#define I365_W_STOP 2 +#define I365_W_OFF 4 + +/* Flags for I365_STATUS */ +#define I365_CS_BVD1 0x01 +#define I365_CS_STSCHG 0x01 +#define I365_CS_BVD2 0x02 +#define I365_CS_SPKR 0x02 +#define I365_CS_DETECT 0x0C +#define I365_CS_WRPROT 0x10 +#define I365_CS_READY 0x20 /* Inverted */ +#define I365_CS_POWERON 0x40 +#define I365_CS_GPI 0x80 + +/* Flags for I365_POWER */ +#define I365_PWR_OFF 0x00 /* Turn off the socket */ +#define I365_PWR_OUT 0x80 /* Output enable */ +#define I365_PWR_NORESET 0x40 /* Disable RESETDRV on resume */ +#define I365_PWR_AUTO 0x20 /* Auto pwr switch enable */ +#define I365_VCC_MASK 0x18 /* Mask for turning off Vcc */ +/* There are different layouts for B-step and DF-step chips: the B + step has independent Vpp1/Vpp2 control, and the DF step has only + Vpp1 control, plus 3V control */ +#define I365_VCC_5V 0x10 /* Vcc = 5.0v */ +#define I365_VCC_3V 0x18 /* Vcc = 3.3v */ +#define I365_VPP2_MASK 0x0c /* Mask for turning off Vpp2 */ +#define I365_VPP2_5V 0x04 /* Vpp2 = 5.0v */ +#define I365_VPP2_12V 0x08 /* Vpp2 = 12.0v */ +#define I365_VPP1_MASK 0x03 /* Mask for turning off Vpp1 */ +#define I365_VPP1_5V 0x01 /* Vpp2 = 5.0v */ +#define I365_VPP1_12V 0x02 /* Vpp2 = 12.0v */ + +/* Flags for I365_INTCTL */ +#define I365_RING_ENA 0x80 +#define I365_PC_RESET 0x40 +#define I365_PC_IOCARD 0x20 +#define I365_INTR_ENA 0x10 +#define I365_IRQ_MASK 0x0F + +/* Flags for I365_CSC and I365_CSCINT*/ +#define I365_CSC_BVD1 0x01 +#define I365_CSC_STSCHG 0x01 +#define I365_CSC_BVD2 0x02 +#define I365_CSC_READY 0x04 +#define I365_CSC_DETECT 0x08 +#define I365_CSC_ANY 0x0F +#define I365_CSC_GPI 0x10 + +/* Flags for I365_ADDRWIN */ +#define I365_ADDR_MEMCS16 0x20 +#define I365_ENA_IO(map) (0x40 << (map)) +#define I365_ENA_MEM(map) (0x01 << (map)) + +/* Flags for I365_IOCTL */ +#define I365_IOCTL_MASK(map) (0x0F << (map<<2)) +#define I365_IOCTL_WAIT(map) (0x08 << (map<<2)) +#define I365_IOCTL_0WS(map) (0x04 << (map<<2)) +#define I365_IOCTL_IOCS16(map) (0x02 << (map<<2)) +#define I365_IOCTL_16BIT(map) (0x01 << (map<<2)) + +/* Flags for I365_GENCTL */ +#define I365_CTL_16DELAY 0x01 +#define I365_CTL_RESET 0x02 +#define I365_CTL_GPI_ENA 0x04 +#define I365_CTL_GPI_CTL 0x08 +#define I365_CTL_RESUME 0x10 +#define I365_CTL_SW_IRQ 0x20 + +/* Flags for I365_GBLCTL */ +#define I365_GBL_PWRDOWN 0x01 +#define I365_GBL_CSC_LEV 0x02 +#define I365_GBL_WRBACK 0x04 +#define I365_GBL_IRQ_0_LEV 0x08 +#define I365_GBL_IRQ_1_LEV 0x10 + +/* Flags for memory window registers */ +#define I365_MEM_16BIT 0x8000 /* In memory start high byte */ +#define I365_MEM_0WS 0x4000 +#define I365_MEM_WS1 0x8000 /* In memory stop high byte */ +#define I365_MEM_WS0 0x4000 +#define I365_MEM_WRPROT 0x8000 /* In offset high byte */ +#define I365_MEM_REG 0x4000 + +#define I365_REG(slot, reg) (((slot) << 6) | (reg)) + +/* Default ISA interrupt mask */ +#define I365_ISA_IRQ_MASK 0xdeb8 /* irq's 3-5,7,9-12,14,15 */ + +/* Device ID's for PCI-to-PCMCIA bridges */ + +#ifndef PCI_VENDOR_ID_INTEL +#define PCI_VENDOR_ID_INTEL 0x8086 +#endif +#ifndef PCI_DEVICE_ID_INTEL_82092AA_0 +#define PCI_DEVICE_ID_INTEL_82092AA_0 0x1221 +#endif +#ifndef PCI_VENDOR_ID_OMEGA +#define PCI_VENDOR_ID_OMEGA 0x119b +#endif +#ifndef PCI_DEVICE_ID_OMEGA_82C092G +#define PCI_DEVICE_ID_OMEGA_82C092G 0x1221 +#endif + +#endif /* _LINUX_I82365_H */ diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h new file mode 100644 index 0000000..d197e42 --- /dev/null +++ b/include/pcmcia/ss.h @@ -0,0 +1,133 @@ +/* + * ss.h 1.31 2001/08/24 12:16:13 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_SS_H +#define _LINUX_SS_H + +/* For RegisterCallback */ +typedef struct ss_callback_t { + void (*handler)(void *info, u_int events); + void *info; +} ss_callback_t; + +/* Definitions for card status flags for GetStatus */ +#define SS_WRPROT 0x0001 +#define SS_CARDLOCK 0x0002 +#define SS_EJECTION 0x0004 +#define SS_INSERTION 0x0008 +#define SS_BATDEAD 0x0010 +#define SS_BATWARN 0x0020 +#define SS_READY 0x0040 +#define SS_DETECT 0x0080 +#define SS_POWERON 0x0100 +#define SS_GPI 0x0200 +#define SS_STSCHG 0x0400 +#define SS_CARDBUS 0x0800 +#define SS_3VCARD 0x1000 +#define SS_XVCARD 0x2000 +#define SS_PENDING 0x4000 + +/* for InquireSocket */ +typedef struct socket_cap_t { + u_int features; + u_int irq_mask; + u_int map_size; + u_char pci_irq; + u_char cardbus; + struct pci_bus *cb_bus; + struct bus_operations *bus; +} socket_cap_t; + +/* InquireSocket capabilities */ +#define SS_CAP_PAGE_REGS 0x0001 +#define SS_CAP_VIRTUAL_BUS 0x0002 +#define SS_CAP_MEM_ALIGN 0x0004 +#define SS_CAP_STATIC_MAP 0x0008 +#define SS_CAP_PCCARD 0x4000 +#define SS_CAP_CARDBUS 0x8000 + +/* for GetSocket, SetSocket */ +typedef struct socket_state_t { + u_int flags; + u_int csc_mask; + u_char Vcc, Vpp; + u_char io_irq; +} socket_state_t; + +/* Socket configuration flags */ +#define SS_PWR_AUTO 0x0010 +#define SS_IOCARD 0x0020 +#define SS_RESET 0x0040 +#define SS_DMA_MODE 0x0080 +#define SS_SPKR_ENA 0x0100 +#define SS_OUTPUT_ENA 0x0200 +#define SS_ZVCARD 0x0400 + +/* Flags for I/O port and memory windows */ +#define MAP_ACTIVE 0x01 +#define MAP_16BIT 0x02 +#define MAP_AUTOSZ 0x04 +#define MAP_0WS 0x08 +#define MAP_WRPROT 0x10 +#define MAP_ATTRIB 0x20 +#define MAP_USE_WAIT 0x40 +#define MAP_PREFETCH 0x80 + +/* Use this just for bridge windows */ +#define MAP_IOSPACE 0x20 + +typedef struct pccard_io_map { + u_char map; + u_char flags; + u_short speed; + u_short start, stop; +} pccard_io_map; + +typedef struct pccard_mem_map { + u_char map; + u_char flags; + u_short speed; + u_long sys_start, sys_stop; + u_int card_start; +} pccard_mem_map; + +typedef struct cb_bridge_map { + u_char map; + u_char flags; + u_int start, stop; +} cb_bridge_map; + +enum ss_service { + SS_RegisterCallback, SS_InquireSocket, + SS_GetStatus, SS_GetSocket, SS_SetSocket, + SS_GetIOMap, SS_SetIOMap, SS_GetMemMap, SS_SetMemMap, + SS_GetBridge, SS_SetBridge, SS_ProcSetup +}; + +#endif /* _LINUX_SS_H */ diff --git a/include/pcmcia/ti113x.h b/include/pcmcia/ti113x.h new file mode 100644 index 0000000..26c5764 --- /dev/null +++ b/include/pcmcia/ti113x.h @@ -0,0 +1,234 @@ +/* + * ti113x.h 1.31 2002/05/12 18:19:47 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_TI113X_H +#define _LINUX_TI113X_H + +#ifndef PCI_VENDOR_ID_TI +#define PCI_VENDOR_ID_TI 0x104c +#endif + +#ifndef PCI_DEVICE_ID_TI_1130 +#define PCI_DEVICE_ID_TI_1130 0xac12 +#endif +#ifndef PCI_DEVICE_ID_TI_1031 +#define PCI_DEVICE_ID_TI_1031 0xac13 +#endif +#ifndef PCI_DEVICE_ID_TI_1131 +#define PCI_DEVICE_ID_TI_1131 0xac15 +#endif +#ifndef PCI_DEVICE_ID_TI_1210 +#define PCI_DEVICE_ID_TI_1210 0xac1a +#endif +#ifndef PCI_DEVICE_ID_TI_1211 +#define PCI_DEVICE_ID_TI_1211 0xac1e +#endif +#ifndef PCI_DEVICE_ID_TI_1220 +#define PCI_DEVICE_ID_TI_1220 0xac17 +#endif +#ifndef PCI_DEVICE_ID_TI_1221 +#define PCI_DEVICE_ID_TI_1221 0xac19 +#endif +#ifndef PCI_DEVICE_ID_TI_1250A +#define PCI_DEVICE_ID_TI_1250A 0xac16 +#endif +#ifndef PCI_DEVICE_ID_TI_1225 +#define PCI_DEVICE_ID_TI_1225 0xac1c +#endif +#ifndef PCI_DEVICE_ID_TI_1251A +#define PCI_DEVICE_ID_TI_1251A 0xac1d +#endif +#ifndef PCI_DEVICE_ID_TI_1251B +#define PCI_DEVICE_ID_TI_1251B 0xac1f +#endif +#ifndef PCI_DEVICE_ID_TI_1410 +#define PCI_DEVICE_ID_TI_1410 0xac50 +#endif +#ifndef PCI_DEVICE_ID_TI_1420 +#define PCI_DEVICE_ID_TI_1420 0xac51 +#endif +#ifndef PCI_DEVICE_ID_TI_1450 +#define PCI_DEVICE_ID_TI_1450 0xac1b +#endif +#ifndef PCI_DEVICE_ID_TI_1451 +#define PCI_DEVICE_ID_TI_1451 0xac52 +#endif +#ifndef PCI_DEVICE_ID_TI_1510 +#define PCI_DEVICE_ID_TI_1510 0xac56 +#endif +#ifndef PCI_DEVICE_ID_TI_4410 +#define PCI_DEVICE_ID_TI_4410 0xac41 +#endif +#ifndef PCI_DEVICE_ID_TI_4450 +#define PCI_DEVICE_ID_TI_4450 0xac40 +#endif +#ifndef PCI_DEVICE_ID_TI_4451 +#define PCI_DEVICE_ID_TI_4451 0xac42 +#endif + +/* Register definitions for TI 113X PCI-to-CardBus bridges */ + +/* System Control Register */ +#define TI113X_SYSTEM_CONTROL 0x80 /* 32 bit */ +#define TI113X_SCR_SMIROUTE 0x04000000 +#define TI113X_SCR_SMISTATUS 0x02000000 +#define TI113X_SCR_SMIENB 0x01000000 +#define TI113X_SCR_VCCPROT 0x00200000 +#define TI113X_SCR_REDUCEZV 0x00100000 +#define TI113X_SCR_CDREQEN 0x00080000 +#define TI113X_SCR_CDMACHAN 0x00070000 +#define TI113X_SCR_SOCACTIVE 0x00002000 +#define TI113X_SCR_PWRSTREAM 0x00000800 +#define TI113X_SCR_DELAYUP 0x00000400 +#define TI113X_SCR_DELAYDOWN 0x00000200 +#define TI113X_SCR_INTERROGATE 0x00000100 +#define TI113X_SCR_CLKRUN_SEL 0x00000080 +#define TI113X_SCR_PWRSAVINGS 0x00000040 +#define TI113X_SCR_SUBSYSRW 0x00000020 +#define TI113X_SCR_CB_DPAR 0x00000010 +#define TI113X_SCR_CDMA_EN 0x00000008 +#define TI113X_SCR_ASYNC_IRQ 0x00000004 +#define TI113X_SCR_KEEPCLK 0x00000002 +#define TI113X_SCR_CLKRUN_ENA 0x00000001 + +#define TI122X_SCR_SER_STEP 0xc0000000 +#define TI122X_SCR_INTRTIE 0x20000000 +#define TI122X_SCR_P2CCLK 0x08000000 +#define TI122X_SCR_CBRSVD 0x00400000 +#define TI122X_SCR_MRBURSTDN 0x00008000 +#define TI122X_SCR_MRBURSTUP 0x00004000 +#define TI122X_SCR_RIMUX 0x00000001 + +/* Multimedia Control Register */ +#define TI1250_MULTIMEDIA_CTL 0x84 /* 8 bit */ +#define TI1250_MMC_ZVOUTEN 0x80 +#define TI1250_MMC_PORTSEL 0x40 +#define TI1250_MMC_ZVEN1 0x02 +#define TI1250_MMC_ZVEN0 0x01 + +#define TI1250_GENERAL_STATUS 0x85 /* 8 bit */ +#define TI1250_GPIO0_CONTROL 0x88 /* 8 bit */ +#define TI1250_GPIO1_CONTROL 0x89 /* 8 bit */ +#define TI1250_GPIO2_CONTROL 0x8a /* 8 bit */ +#define TI1250_GPIO3_CONTROL 0x8b /* 8 bit */ +#define TI12XX_IRQMUX 0x8c /* 32 bit */ + +/* Retry Status Register */ +#define TI113X_RETRY_STATUS 0x90 /* 8 bit */ +#define TI113X_RSR_PCIRETRY 0x80 +#define TI113X_RSR_CBRETRY 0x40 +#define TI113X_RSR_TEXP_CBB 0x20 +#define TI113X_RSR_MEXP_CBB 0x10 +#define TI113X_RSR_TEXP_CBA 0x08 +#define TI113X_RSR_MEXP_CBA 0x04 +#define TI113X_RSR_TEXP_PCI 0x02 +#define TI113X_RSR_MEXP_PCI 0x01 + +/* Card Control Register */ +#define TI113X_CARD_CONTROL 0x91 /* 8 bit */ +#define TI113X_CCR_RIENB 0x80 +#define TI113X_CCR_ZVENABLE 0x40 +#define TI113X_CCR_PCI_IRQ_ENA 0x20 +#define TI113X_CCR_PCI_IREQ 0x10 +#define TI113X_CCR_PCI_CSC 0x08 +#define TI113X_CCR_SPKROUTEN 0x02 +#define TI113X_CCR_IFG 0x01 + +#define TI1220_CCR_PORT_SEL 0x20 +#define TI122X_CCR_AUD2MUX 0x04 + +/* Device Control Register */ +#define TI113X_DEVICE_CONTROL 0x92 /* 8 bit */ +#define TI113X_DCR_5V_FORCE 0x40 +#define TI113X_DCR_3V_FORCE 0x20 +#define TI113X_DCR_IMODE_MASK 0x06 +#define TI113X_DCR_IMODE_ISA 0x02 +#define TI113X_DCR_IMODE_SERIAL 0x04 + +#define TI12XX_DCR_IMODE_PCI_ONLY 0x00 +#define TI12XX_DCR_IMODE_ALL_SERIAL 0x06 + +/* Buffer Control Register */ +#define TI113X_BUFFER_CONTROL 0x93 /* 8 bit */ +#define TI113X_BCR_CB_READ_DEPTH 0x08 +#define TI113X_BCR_CB_WRITE_DEPTH 0x04 +#define TI113X_BCR_PCI_READ_DEPTH 0x02 +#define TI113X_BCR_PCI_WRITE_DEPTH 0x01 + +/* Diagnostic Register */ +#define TI1250_DIAGNOSTIC 0x93 /* 8 bit */ +#define TI1250_DIAG_TRUE_VALUE 0x80 +#define TI1250_DIAG_PCI_IREQ 0x40 +#define TI1250_DIAG_PCI_CSC 0x20 +#define TI1250_DIAG_ASYNC_CSC 0x01 + +/* DMA Registers */ +#define TI113X_DMA_0 0x94 /* 32 bit */ +#define TI113X_DMA_1 0x98 /* 32 bit */ + +/* ExCA IO offset registers */ +#define TI113X_IO_OFFSET(map) (0x36+((map)<<1)) + +/* Data structure for tracking vendor-specific state */ +typedef struct ti113x_state_t { + u32 sysctl; /* TI113X_SYSTEM_CONTROL */ + u8 cardctl; /* TI113X_CARD_CONTROL */ + u8 devctl; /* TI113X_DEVICE_CONTROL */ + u8 diag; /* TI1250_DIAGNOSTIC */ + u32 irqmux; /* TI12XX_IRQMUX */ +} ti113x_state_t; + +#define TI_PCIC_ID \ + IS_TI1130, IS_TI1131, IS_TI1031, IS_TI1210, IS_TI1211, \ + IS_TI1220, IS_TI1221, IS_TI1225, IS_TI1250A, IS_TI1251A, \ + IS_TI1251B, IS_TI1410, IS_TI1420, IS_TI1450, IS_TI1451, \ + IS_TI1510, IS_TI4410, IS_TI4450, IS_TI4451 + +#define TI_PCIC_INFO \ + { "TI 1130", IS_TI|IS_CARDBUS, ID(TI, 1130) }, \ + { "TI 1131", IS_TI|IS_CARDBUS, ID(TI, 1131) }, \ + { "TI 1031", IS_TI|IS_CARDBUS, ID(TI, 1031) }, \ + { "TI 1210", IS_TI|IS_CARDBUS, ID(TI, 1210) }, \ + { "TI 1211", IS_TI|IS_CARDBUS, ID(TI, 1211) }, \ + { "TI 1220", IS_TI|IS_CARDBUS, ID(TI, 1220) }, \ + { "TI 1221", IS_TI|IS_CARDBUS, ID(TI, 1221) }, \ + { "TI 1225", IS_TI|IS_CARDBUS, ID(TI, 1225) }, \ + { "TI 1250A", IS_TI|IS_CARDBUS, ID(TI, 1250A) }, \ + { "TI 1251A", IS_TI|IS_CARDBUS, ID(TI, 1251A) }, \ + { "TI 1251B", IS_TI|IS_CARDBUS, ID(TI, 1251B) }, \ + { "TI 1410", IS_TI|IS_CARDBUS, ID(TI, 1410) }, \ + { "TI 1420", IS_TI|IS_CARDBUS, ID(TI, 1420) }, \ + { "TI 1450", IS_TI|IS_CARDBUS, ID(TI, 1450) }, \ + { "TI 1451", IS_TI|IS_CARDBUS, ID(TI, 1451) }, \ + { "TI 1510", IS_TI|IS_CARDBUS, ID(TI, 1510) }, \ + { "TI 4410", IS_TI|IS_CARDBUS, ID(TI, 4410) }, \ + { "TI 4450", IS_TI|IS_CARDBUS, ID(TI, 4450) }, \ + { "TI 4451", IS_TI|IS_CARDBUS, ID(TI, 4451) } + +#endif /* _LINUX_TI113X_H */ diff --git a/include/pcmcia/yenta.h b/include/pcmcia/yenta.h new file mode 100644 index 0000000..525d8ec --- /dev/null +++ b/include/pcmcia/yenta.h @@ -0,0 +1,156 @@ +/* + * yenta.h 1.20 2001/08/24 12:15:34 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_YENTA_H +#define _LINUX_YENTA_H + +/* PCI Configuration Registers */ + +#define PCI_STATUS_CAPLIST 0x10 +#define PCI_CB_CAPABILITY_POINTER 0x14 /* 8 bit */ +#define PCI_CAPABILITY_ID 0x00 /* 8 bit */ +#define PCI_CAPABILITY_PM 0x01 +#define PCI_NEXT_CAPABILITY 0x01 /* 8 bit */ +#define PCI_PM_CAPABILITIES 0x02 /* 16 bit */ +#define PCI_PMCAP_PME_D3COLD 0x8000 +#define PCI_PMCAP_PME_D3HOT 0x4000 +#define PCI_PMCAP_PME_D2 0x2000 +#define PCI_PMCAP_PME_D1 0x1000 +#define PCI_PMCAP_PME_D0 0x0800 +#define PCI_PMCAP_D2_CAP 0x0400 +#define PCI_PMCAP_D1_CAP 0x0200 +#define PCI_PMCAP_DYN_DATA 0x0100 +#define PCI_PMCAP_DSI 0x0020 +#define PCI_PMCAP_AUX_PWR 0x0010 +#define PCI_PMCAP_PMECLK 0x0008 +#define PCI_PMCAP_VERSION_MASK 0x0007 +#define PCI_PM_CONTROL_STATUS 0x04 /* 16 bit */ +#define PCI_PMCS_PME_STATUS 0x8000 +#define PCI_PMCS_DATASCALE_MASK 0x6000 +#define PCI_PMCS_DATASCALE_SHIFT 13 +#define PCI_PMCS_DATASEL_MASK 0x1e00 +#define PCI_PMCS_DATASEL_SHIFT 9 +#define PCI_PMCS_PME_ENABLE 0x0100 +#define PCI_PMCS_PWR_STATE_MASK 0x0003 +#define PCI_PMCS_PWR_STATE_D0 0x0000 +#define PCI_PMCS_PWR_STATE_D1 0x0001 +#define PCI_PMCS_PWR_STATE_D2 0x0002 +#define PCI_PMCS_PWR_STATE_D3 0x0003 +#define PCI_PM_BRIDGE_EXT 0x06 /* 8 bit */ +#define PCI_PM_DATA 0x07 /* 8 bit */ + +#define CB_PRIMARY_BUS 0x18 /* 8 bit */ +#define CB_CARDBUS_BUS 0x19 /* 8 bit */ +#define CB_SUBORD_BUS 0x1a /* 8 bit */ +#define CB_LATENCY_TIMER 0x1b /* 8 bit */ + +#define CB_MEM_BASE(m) (0x1c + 8*(m)) +#define CB_MEM_LIMIT(m) (0x20 + 8*(m)) +#define CB_IO_BASE(m) (0x2c + 8*(m)) +#define CB_IO_LIMIT(m) (0x30 + 8*(m)) + +#define CB_BRIDGE_CONTROL 0x3e /* 16 bit */ +#define CB_BCR_PARITY_ENA 0x0001 +#define CB_BCR_SERR_ENA 0x0002 +#define CB_BCR_ISA_ENA 0x0004 +#define CB_BCR_VGA_ENA 0x0008 +#define CB_BCR_MABORT 0x0020 +#define CB_BCR_CB_RESET 0x0040 +#define CB_BCR_ISA_IRQ 0x0080 +#define CB_BCR_PREFETCH(m) (0x0100 << (m)) +#define CB_BCR_WRITE_POST 0x0400 + +#define CB_LEGACY_MODE_BASE 0x44 + +/* Memory mapped registers */ + +#define CB_SOCKET_EVENT 0x0000 +#define CB_SE_CSTSCHG 0x00000001 +#define CB_SE_CCD 0x00000006 +#define CB_SE_CCD1 0x00000002 +#define CB_SE_CCD2 0x00000004 +#define CB_SE_PWRCYCLE 0x00000008 + +#define CB_SOCKET_MASK 0x0004 +#define CB_SM_CSTSCHG 0x00000001 +#define CB_SM_CCD 0x00000006 +#define CB_SM_PWRCYCLE 0x00000008 + +#define CB_SOCKET_STATE 0x0008 +#define CB_SS_CSTSCHG 0x00000001 +#define CB_SS_CCD 0x00000006 +#define CB_SS_CCD1 0x00000002 +#define CB_SS_CCD2 0x00000004 +#define CB_SS_PWRCYCLE 0x00000008 +#define CB_SS_16BIT 0x00000010 +#define CB_SS_32BIT 0x00000020 +#define CB_SS_CINT 0x00000040 +#define CB_SS_BADCARD 0x00000080 +#define CB_SS_DATALOST 0x00000100 +#define CB_SS_BADVCC 0x00000200 +#define CB_SS_5VCARD 0x00000400 +#define CB_SS_3VCARD 0x00000800 +#define CB_SS_XVCARD 0x00001000 +#define CB_SS_YVCARD 0x00002000 +#define CB_SS_VSENSE 0x00003c86 +#define CB_SS_5VSOCKET 0x10000000 +#define CB_SS_3VSOCKET 0x20000000 +#define CB_SS_XVSOCKET 0x40000000 +#define CB_SS_YVSOCKET 0x80000000 + +#define CB_SOCKET_FORCE 0x000c +#define CB_SF_CVSTEST 0x00004000 + +#define CB_SOCKET_CONTROL 0x0010 +#define CB_SC_VPP_MASK 0x00000007 +#define CB_SC_VPP_OFF 0x00000000 +#define CB_SC_VPP_12V 0x00000001 +#define CB_SC_VPP_5V 0x00000002 +#define CB_SC_VPP_3V 0x00000003 +#define CB_SC_VPP_XV 0x00000004 +#define CB_SC_VPP_YV 0x00000005 +#define CB_SC_VCC_MASK 0x00000070 +#define CB_SC_VCC_OFF 0x00000000 +#define CB_SC_VCC_5V 0x00000020 +#define CB_SC_VCC_3V 0x00000030 +#define CB_SC_VCC_XV 0x00000040 +#define CB_SC_VCC_YV 0x00000050 +#define CB_SC_CCLK_STOP 0x00000080 + +#define CB_SOCKET_POWER 0x0020 +#define CB_SP_CLK_CTRL 0x00000001 +#define CB_SP_CLK_CTRL_ENA 0x00010000 +#define CB_SP_CLK_MODE 0x01000000 +#define CB_SP_ACCESS 0x02000000 + +/* Address bits 31..24 for memory windows for 16-bit cards, + accessable only by memory mapping the 16-bit register set */ +#define CB_MEM_PAGE(map) (0x40 + (map)) + +#endif /* _LINUX_YENTA_H */ |