sbc8548: delete unused MPC8548CDS info carried over from port

There are a couple defines and PCI bridge quirks related to the PCI
backplane of the MPC8548CDS that have no meaning in the context of
the port to the sbc8548 board, so delete them.

Also, the form factor of the sbc8548 is a standalone board with a
single PCI-X and a single PCI-e slot.  That pretty much guarantees
that it will never be a PCI agent itself, so the host/agent and root
complex/end node distinctions have been removed.

Similarly, since there is no physical connector mapping to PCI2, so
all references of PCI2 in the board support files have been removed
as well.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 6 insertions, 66 deletions

diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c
index fc78a7c..fff7dab 100644
--- a/board/sbc8548/sbc8548.c
+++ b/board/sbc8548/sbc8548.c
@@ -314,35 +314,9 @@ long int fixed_sdram (void)
 }
 #endif
 
-#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
-/* For some reason the Tundra PCI bridge shows up on itself as a
- * different device.  Work around that by refusing to configure it.
- */
-void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
-
-static struct pci_config_table pci_sbc8548_config_table[] = {
-	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
-		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
-		mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
-		mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
-		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
-		mpc85xx_config_via_ac97, {0,0,0}},
-	{},
-};
-
-static struct pci_controller pci1_hose = {
-	config_table: pci_sbc8548_config_table};
-#endif	/* CONFIG_PCI */
-
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif	/* CONFIG_PCI2 */
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif	/* CONFIG_PCI1 */
 
 #ifdef CONFIG_PCIE1
 static struct pci_controller pcie1_hose;
@@ -359,24 +333,20 @@ pci_init_board(void)
 {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
 	struct pci_controller *hose = &pci1_hose;
-	struct pci_config_table *table;
 	struct pci_region *r = hose->regions;
 
 	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
 	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
 	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
 
-	uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
-
 	uint pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
 
 	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
-		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
+		printf ("    PCI host: %d bit, %s MHz, %s, %s\n",
 			(pci_32) ? 32 : 64,
 			(pci_speed == 33333000) ? "33" :
 			(pci_speed == 66666000) ? "66" : "unknown",
 			pci_clk_sel ? "sync" : "async",
-			pci_agent ? "agent" : "host",
 			pci_arb ? "arbiter" : "external-arbiter"
 			);
 
@@ -395,12 +365,6 @@ pci_init_board(void)
 			       PCI_REGION_IO);
 		hose->region_count = r - hose->regions;
 
-		/* relocate config table pointers */
-		hose->config_table = \
-			(struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
-		for (table = hose->config_table; table && table->vendor; table++)
-			table->config_device += gd->reloc_off;
-
 		hose->first_busno=first_free_busno;
 
 		fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
@@ -425,33 +389,18 @@ pci_init_board(void)
 	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
 #endif
 
-#ifdef CONFIG_PCI2
-{
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-}
-#else
-	gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
-#endif /* CONFIG_PCI2 */
+	gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable PCI2 */
 
 #ifdef CONFIG_PCIE1
 {
 	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
 	struct pci_controller *hose = &pcie1_hose;
-	int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
 	struct pci_region *r = hose->regions;
 
 	int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
 
 	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
-		printf ("\n    PCIE connected to slot as %s (base address %x)",
-			pcie_ep ? "End Point" : "Root Complex",
+		printf ("\n    PCIE at base address %x",
 			(uint)pci);
 
 		if (pci->pme_msg_det) {
diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h
index 838b4db..3d05afb 100644
--- a/include/configs/sbc8548.h
+++ b/include/configs/sbc8548.h
@@ -42,7 +42,6 @@
 #undef CONFIG_PCI1		/* PCI controller 1 */
 #undef CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
 #undef CONFIG_RIO
-#undef CONFIG_PCI2
 #undef CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 
 #define CONFIG_TSEC_ENET		/* tsec ethernet support */
@@ -343,14 +342,6 @@
 #define CONFIG_SYS_RIO_MEM_SIZE	0x20000000	/* 512M */
 #endif
 
-#ifdef CONFIG_LEGACY
-#define BRIDGE_ID 17
-#define VIA_ID 2
-#else
-#define BRIDGE_ID 28
-#define VIA_ID 4
-#endif
-
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI