summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-10-11 10:00:34 +0200
committerWolfgang Denk <wd@denx.de>2010-10-11 10:00:34 +0200
commitbfc7bea6adc46e1db2f5a5e3464d7652ed67c864 (patch)
tree4399dca93e4c42a3f652dd5b0b6143ab4aef50f4
parent29840de6b6d322e9cca3d22d254a1d066afbef02 (diff)
parentc868af3e57610b41c6ed4fd8d8744d8cc0a21b29 (diff)
downloadbootable_bootloader_goldelico_gta04-bfc7bea6adc46e1db2f5a5e3464d7652ed67c864.zip
bootable_bootloader_goldelico_gta04-bfc7bea6adc46e1db2f5a5e3464d7652ed67c864.tar.gz
bootable_bootloader_goldelico_gta04-bfc7bea6adc46e1db2f5a5e3464d7652ed67c864.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-x86
-rw-r--r--arch/i386/config.mk11
-rw-r--r--arch/i386/cpu/cpu.c57
-rw-r--r--arch/i386/cpu/interrupts.c28
-rw-r--r--arch/i386/cpu/sc520/sc520.c54
-rw-r--r--arch/i386/cpu/sc520/sc520_asm.S668
-rw-r--r--arch/i386/cpu/start.S225
-rw-r--r--arch/i386/cpu/start16.S18
-rw-r--r--arch/i386/include/asm/config.h2
-rw-r--r--arch/i386/include/asm/global_data.h27
-rw-r--r--arch/i386/include/asm/interrupt.h4
-rw-r--r--arch/i386/include/asm/ptrace.h24
-rw-r--r--arch/i386/lib/bios_setup.c14
-rw-r--r--arch/i386/lib/board.c119
-rw-r--r--arch/i386/lib/realmode.c14
-rw-r--r--arch/i386/lib/zimage.c18
-rw-r--r--board/eNET/eNET_start.S14
-rw-r--r--board/eNET/eNET_start16.S3
-rw-r--r--board/eNET/u-boot.lds67
-rw-r--r--common/cmd_bdinfo.c1
-rw-r--r--include/configs/eNET.h2
20 files changed, 668 insertions, 702 deletions
diff --git a/arch/i386/config.mk b/arch/i386/config.mk
index 4b990e0..8743f1a 100644
--- a/arch/i386/config.mk
+++ b/arch/i386/config.mk
@@ -25,4 +25,15 @@ CROSS_COMPILE ?= i386-linux-
STANDALONE_LOAD_ADDR = 0x40000
+PLATFORM_CPPFLAGS += -fno-strict-aliasing
+PLATFORM_CPPFLAGS += -Wstrict-prototypes
+PLATFORM_CPPFLAGS += -mregparm=3
+PLATFORM_CPPFLAGS += -fomit-frame-pointer
+PLATFORM_CPPFLAGS += $(call cc-option, -ffreestanding)
+PLATFORM_CPPFLAGS += $(call cc-option, -fno-toplevel-reorder, $(call cc-option, -fno-unit-at-a-time))
+PLATFORM_CPPFLAGS += $(call cc-option, -fno-stack-protector)
+PLATFORM_CPPFLAGS += $(call cc-option, -mpreferred-stack-boundary=2)
PLATFORM_CPPFLAGS += -DCONFIG_I386 -D__I386__
+
+LDFLAGS += --cref --gc-sections
+PLATFORM_RELFLAGS += -ffunction-sections
diff --git a/arch/i386/cpu/cpu.c b/arch/i386/cpu/cpu.c
index bd6aced..ae40384 100644
--- a/arch/i386/cpu/cpu.c
+++ b/arch/i386/cpu/cpu.c
@@ -37,6 +37,61 @@
#include <command.h>
#include <asm/interrupt.h>
+/* Constructor for a conventional segment GDT (or LDT) entry */
+/* This is a macro so it can be used in initializers */
+#define GDT_ENTRY(flags, base, limit) \
+ ((((base) & 0xff000000ULL) << (56-24)) | \
+ (((flags) & 0x0000f0ffULL) << 40) | \
+ (((limit) & 0x000f0000ULL) << (48-16)) | \
+ (((base) & 0x00ffffffULL) << 16) | \
+ (((limit) & 0x0000ffffULL)))
+
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_32BIT_CS 2
+#define GDT_ENTRY_32BIT_DS (GDT_ENTRY_32BIT_CS + 1)
+#define GDT_ENTRY_16BIT_CS (GDT_ENTRY_32BIT_DS + 1)
+#define GDT_ENTRY_16BIT_DS (GDT_ENTRY_16BIT_CS + 1)
+
+/*
+ * Set up the GDT
+ */
+
+struct gdt_ptr {
+ u16 len;
+ u32 ptr;
+} __attribute__((packed));
+
+static void reload_gdt(void)
+{
+ /* There are machines which are known to not boot with the GDT
+ being 8-byte unaligned. Intel recommends 16 byte alignment. */
+ static const u64 boot_gdt[] __attribute__((aligned(16))) = {
+ /* CS: code, read/execute, 4 GB, base 0 */
+ [GDT_ENTRY_32BIT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
+ /* DS: data, read/write, 4 GB, base 0 */
+ [GDT_ENTRY_32BIT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+ /* 16-bit CS: code, read/execute, 64 kB, base 0 */
+ [GDT_ENTRY_16BIT_CS] = GDT_ENTRY(0x109b, 0, 0x0ffff),
+ /* 16-bit DS: data, read/write, 64 kB, base 0 */
+ [GDT_ENTRY_16BIT_DS] = GDT_ENTRY(0x1093, 0, 0x0ffff),
+ };
+ static struct gdt_ptr gdt;
+
+ gdt.len = sizeof(boot_gdt)-1;
+ gdt.ptr = (u32)&boot_gdt;
+
+ asm volatile("lgdtl %0\n" \
+ "movl $((2+1)*8), %%ecx\n" \
+ "movl %%ecx, %%ds\n" \
+ "movl %%ecx, %%es\n" \
+ "movl %%ecx, %%fs\n" \
+ "movl %%ecx, %%gs\n" \
+ "movl %%ecx, %%ss" \
+ : : "m" (gdt) : "ecx");
+}
+
+
int cpu_init_f(void)
{
/* initialize FPU, reset EM, set MP and NE */
@@ -51,6 +106,8 @@ int cpu_init_f(void)
int cpu_init_r(void)
{
+ reload_gdt();
+
/* Initialize core interrupt and exception functionality of CPU */
cpu_init_interrupts ();
return 0;
diff --git a/arch/i386/cpu/interrupts.c b/arch/i386/cpu/interrupts.c
index 51023f3..e4d0868 100644
--- a/arch/i386/cpu/interrupts.c
+++ b/arch/i386/cpu/interrupts.c
@@ -104,7 +104,7 @@ static inline unsigned long get_debugreg(int regno)
return val;
}
-void dump_regs(struct pt_regs *regs)
+void dump_regs(struct irq_regs *regs)
{
unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L;
unsigned long d0, d1, d2, d3, d6, d7;
@@ -225,7 +225,7 @@ int disable_interrupts(void)
}
/* IRQ Low-Level Service Routine */
-__isr__ irq_llsr(struct pt_regs *regs)
+void irq_llsr(struct irq_regs *regs)
{
/*
* For detailed description of each exception, refer to:
@@ -234,7 +234,7 @@ __isr__ irq_llsr(struct pt_regs *regs)
* Order Number: 253665-029US, November 2008
* Table 6-1. Exceptions and Interrupts
*/
- switch (regs->orig_eax) {
+ switch (regs->irq_id) {
case 0x00:
printf("Divide Error (Division by zero)\n");
dump_regs(regs);
@@ -340,7 +340,7 @@ __isr__ irq_llsr(struct pt_regs *regs)
default:
/* Hardware or User IRQ */
- do_irq(regs->orig_eax);
+ do_irq(regs->irq_id);
}
}
@@ -352,17 +352,30 @@ __isr__ irq_llsr(struct pt_regs *regs)
* Interrupt entries are now very small (a push and a jump) but they are
* now slower (all registers pushed on stack which provides complete
* crash dumps in the low level handlers
+ *
+ * Interrupt Entry Point:
+ * - Interrupt has caused eflags, CS and EIP to be pushed
+ * - Interrupt Vector Handler has pushed orig_eax
+ * - pt_regs.esp needs to be adjusted by 40 bytes:
+ * 12 bytes pushed by CPU (EFLAGSF, CS, EIP)
+ * 4 bytes pushed by vector handler (irq_id)
+ * 24 bytes pushed before SP (SS, GS, FS, ES, DS, EAX)
+ * NOTE: Only longs are pushed on/popped off the stack!
*/
asm(".globl irq_common_entry\n" \
".hidden irq_common_entry\n" \
".type irq_common_entry, @function\n" \
"irq_common_entry:\n" \
"cld\n" \
+ "pushl %ss\n" \
"pushl %gs\n" \
"pushl %fs\n" \
"pushl %es\n" \
"pushl %ds\n" \
"pushl %eax\n" \
+ "movl %esp, %eax\n" \
+ "addl $40, %eax\n" \
+ "pushl %eax\n" \
"pushl %ebp\n" \
"pushl %edi\n" \
"pushl %esi\n" \
@@ -370,12 +383,7 @@ asm(".globl irq_common_entry\n" \
"pushl %ecx\n" \
"pushl %ebx\n" \
"mov %esp, %eax\n" \
- "pushl %ebp\n" \
- "movl %esp,%ebp\n" \
- "pushl %eax\n" \
"call irq_llsr\n" \
- "popl %eax\n" \
- "leave\n"\
"popl %ebx\n" \
"popl %ecx\n" \
"popl %edx\n" \
@@ -383,10 +391,12 @@ asm(".globl irq_common_entry\n" \
"popl %edi\n" \
"popl %ebp\n" \
"popl %eax\n" \
+ "popl %eax\n" \
"popl %ds\n" \
"popl %es\n" \
"popl %fs\n" \
"popl %gs\n" \
+ "popl %ss\n" \
"add $4, %esp\n" \
"iret\n" \
DECLARE_INTERRUPT(0) \
diff --git a/arch/i386/cpu/sc520/sc520.c b/arch/i386/cpu/sc520/sc520.c
index 519bfd8..7acd471 100644
--- a/arch/i386/cpu/sc520/sc520.c
+++ b/arch/i386/cpu/sc520/sc520.c
@@ -41,7 +41,8 @@ volatile sc520_mmcr_t *sc520_mmcr = (sc520_mmcr_t *)0xfffef000;
void init_sc520(void)
{
- /* Set the UARTxCTL register at it's slower,
+ /*
+ * Set the UARTxCTL register at it's slower,
* baud clock giving us a 1.8432 MHz reference
*/
writeb(0x07, &sc520_mmcr->uart1ctl);
@@ -50,25 +51,30 @@ void init_sc520(void)
/* first set the timer pin mapping */
writeb(0x72, &sc520_mmcr->clksel); /* no clock frequency selected, use 1.1892MHz */
- /* enable PCI bus arbitrer */
- writeb(0x02, &sc520_mmcr->sysarbctl); /* enable concurrent mode */
+ /* enable PCI bus arbiter (concurrent mode) */
+ writeb(0x02, &sc520_mmcr->sysarbctl);
- writeb(0x1f, &sc520_mmcr->sysarbmenb); /* enable external grants */
- writeb(0x04, &sc520_mmcr->hbctl); /* enable posted-writes */
+ /* enable external grants */
+ writeb(0x1f, &sc520_mmcr->sysarbmenb);
+
+ /* enable posted-writes */
+ writeb(0x04, &sc520_mmcr->hbctl);
if (CONFIG_SYS_SC520_HIGH_SPEED) {
- writeb(0x02, &sc520_mmcr->cpuctl); /* set it to 133 MHz and write back */
+ /* set it to 133 MHz and write back */
+ writeb(0x02, &sc520_mmcr->cpuctl);
gd->cpu_clk = 133000000;
printf("## CPU Speed set to 133MHz\n");
} else {
- writeb(0x01, &sc520_mmcr->cpuctl); /* set it to 100 MHz and write back */
+ /* set it to 100 MHz and write back */
+ writeb(0x01, &sc520_mmcr->cpuctl);
printf("## CPU Speed set to 100MHz\n");
gd->cpu_clk = 100000000;
}
/* wait at least one millisecond */
- asm("movl $0x2000,%%ecx\n"
+ asm("movl $0x2000, %%ecx\n"
"0: pushl %%ecx\n"
"popl %%ecx\n"
"loop 0b\n": : : "ecx");
@@ -107,15 +113,15 @@ unsigned long init_sc520_dram(void)
/* set SDRAM speed here */
- refresh_rate/=78;
- if (refresh_rate<=1) {
- val = 0; /* 7.8us */
- } else if (refresh_rate==2) {
- val = 1; /* 15.6us */
- } else if (refresh_rate==3 || refresh_rate==4) {
- val = 2; /* 31.2us */
+ refresh_rate /= 78;
+ if (refresh_rate <= 1) {
+ val = 0; /* 7.8us */
+ } else if (refresh_rate == 2) {
+ val = 1; /* 15.6us */
+ } else if (refresh_rate == 3 || refresh_rate == 4) {
+ val = 2; /* 31.2us */
} else {
- val = 3; /* 62.4us */
+ val = 3; /* 62.4us */
}
tmp = (readb(&sc520_mmcr->drcctl) & 0xcf) | (val<<4);
@@ -124,9 +130,9 @@ unsigned long init_sc520_dram(void)
val = readb(&sc520_mmcr->drctmctl) & 0xf0;
if (cas_precharge_delay==3) {
- val |= 0x04; /* 3T */
+ val |= 0x04; /* 3T */
} else if (cas_precharge_delay==4) {
- val |= 0x08; /* 4T */
+ val |= 0x08; /* 4T */
} else if (cas_precharge_delay>4) {
val |= 0x0c;
}
@@ -139,8 +145,10 @@ unsigned long init_sc520_dram(void)
writeb(val, &c520_mmcr->drctmctl);
#endif
- /* We read-back the configuration of the dram
- * controller that the assembly code wrote */
+ /*
+ * We read-back the configuration of the dram
+ * controller that the assembly code wrote
+ */
dram_ctrl = readl(&sc520_mmcr->drcbendadr);
bd->bi_dram[0].start = 0;
@@ -148,7 +156,6 @@ unsigned long init_sc520_dram(void)
/* bank 0 enabled */
dram_present = bd->bi_dram[1].start = (dram_ctrl & 0x7f) << 22;
bd->bi_dram[0].size = bd->bi_dram[1].start;
-
} else {
bd->bi_dram[0].size = 0;
bd->bi_dram[1].start = bd->bi_dram[0].start;
@@ -179,11 +186,6 @@ unsigned long init_sc520_dram(void)
} else {
bd->bi_dram[3].size = 0;
}
-
-
-#if 0
- printf("Configured %d bytes of dram\n", dram_present);
-#endif
gd->ram_size = dram_present;
return dram_present;
diff --git a/arch/i386/cpu/sc520/sc520_asm.S b/arch/i386/cpu/sc520/sc520_asm.S
index fff56c0..63c14b7 100644
--- a/arch/i386/cpu/sc520/sc520_asm.S
+++ b/arch/i386/cpu/sc520/sc520_asm.S
@@ -172,396 +172,373 @@
.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */
.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */
-
- /*
- * initialize dram controller registers
- */
.globl mem_init
mem_init:
- xorw %ax,%ax
- movl $DBCTL, %edi
- movb %al, (%edi) /* disable write buffer */
+ /* Preserve Boot Flags */
+ movl %ebx, %ebp
- movl $ECCCTL, %edi
- movb %al, (%edi) /* disable ECC */
+ /* initialize dram controller registers */
+ xorw %ax, %ax
+ movl $DBCTL, %edi
+ movb %al, (%edi) /* disable write buffer */
- movl $DRCTMCTL, %edi
- movb $0x1E,%al /* Set SDRAM timing for slowest */
- movb %al, (%edi)
+ movl $ECCCTL, %edi
+ movb %al, (%edi) /* disable ECC */
- /*
- * setup loop to do 4 external banks starting with bank 3
- */
- movl $0xff000000,%eax /* enable last bank and setup */
- movl $DRCBENDADR, %edi /* ending address register */
- movl %eax, (%edi)
+ movl $DRCTMCTL, %edi
+ movb $0x1e, %al /* Set SDRAM timing for slowest */
+ movb %al, (%edi)
- movl $DRCCFG, %edi /* setup */
- movw $0xbbbb,%ax /* dram config register for */
- movw %ax, (%edi)
+ /* setup loop to do 4 external banks starting with bank 3 */
+ movl $0xff000000, %eax /* enable last bank and setup */
+ movl $DRCBENDADR, %edi /* ending address register */
+ movl %eax, (%edi)
- /*
- * issue a NOP to all DRAMs
- */
- movl $DRCCTL, %edi /* setup DRAM control register with */
- movb $0x1,%al /* Disable refresh,disable write buffer */
- movb %al, (%edi)
- movl $CACHELINESZ, %esi /* just a dummy address to write for */
- movw %ax, (%esi)
- /*
- * delay for 100 usec? 200?
- * ******this is a cludge for now *************
- */
- movw $100,%cx
-sizdelay:
- loop sizdelay /* we need 100 usec here */
- /***********************************************/
+ movl $DRCCFG, %edi /* setup */
+ movw $0xbbbb, %ax /* dram config register for */
+ movw %ax, (%edi)
- /*
- * issue all banks precharge
- */
- movb $0x2,%al /* All banks precharge */
- movb %al, (%edi)
- movw %ax, (%esi)
+ /* issue a NOP to all DRAMs */
+ movl $DRCCTL, %edi /* setup DRAM control register with */
+ movb $0x01, %al /* Disable refresh,disable write buffer */
+ movb %al, (%edi)
+ movl $CACHELINESZ, %esi /* just a dummy address to write for */
+ movw %ax, (%esi)
- /*
- * issue 2 auto refreshes to all banks
- */
- movb $0x4,%al /* Auto refresh cmd */
- movb %al, (%edi)
- movw $2,%cx
-refresh1:
- movw %ax, (%esi)
- loop refresh1
+ /* delay for 100 usec? */
+ movw $100, %cx
+sizdelay:
+ loop sizdelay
- /*
- * issue LOAD MODE REGISTER command
- */
- movb $0x3,%al /* Load mode register cmd */
- movb %al, (%edi)
- movw %ax, (%esi)
+ /* issue all banks precharge */
+ movb $0x02, %al
+ movb %al, (%edi)
+ movw %ax, (%esi)
- /*
- * issue 8 more auto refreshes to all banks
- */
- movb $0x4,%al /* Auto refresh cmd */
- movb %al, (%edi)
- movw $8,%cx
+ /* issue 2 auto refreshes to all banks */
+ movb $0x04, %al /* Auto refresh cmd */
+ movb %al, (%edi)
+ movw $0x02, %cx
+refresh1:
+ movw %ax, (%esi)
+ loop refresh1
+
+ /* issue LOAD MODE REGISTER command */
+ movb $0x03, %al /* Load mode register cmd */
+ movb %al, (%edi)
+ movw %ax, (%esi)
+
+ /* issue 8 more auto refreshes to all banks */
+ movb $0x04, %al /* Auto refresh cmd */
+ movb %al, (%edi)
+ movw $0x0008, %cx
refresh2:
- movw %ax, (%esi)
- loop refresh2
+ movw %ax, (%esi)
+ loop refresh2
- /*
- * set control register to NORMAL mode
- */
- movb $0x0,%al /* Normal mode value */
- movb %al, (%edi)
+ /* set control register to NORMAL mode */
+ movb $0x00, %al /* Normal mode value */
+ movb %al, (%edi)
- /*
- * size dram starting with external bank 3 moving to external bank 0
- */
- movl $0x3,%ecx /* start with external bank 3 */
+ /*
+ * size dram starting with external bank 3
+ * moving to external bank 0
+ */
+ movl $0x3, %ecx /* start with external bank 3 */
nextbank:
- /*
- * write col 11 wrap adr
- */
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
- movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
- movl %eax, (%esi) /* write max col pattern at max col adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write col 10 wrap adr
- */
+ /* write col 11 wrap adr */
+ movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
+ movl $COL11_DATA, %eax /* pattern for max supported columns(11) */
+ movl %eax, (%esi) /* write max col pattern at max col adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write col 10 wrap adr */
+ movl $COL10_ADR, %esi /* set address to 10 col wrap address */
+ movl $COL10_DATA, %eax /* pattern for 10 col wrap */
+ movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write col 9 wrap adr */
+ movl $COL09_ADR, %esi /* set address to 9 col wrap address */
+ movl $COL09_DATA, %eax /* pattern for 9 col wrap */
+ movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write col 8 wrap adr */
+ movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
+ movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
+ movl %eax, (%esi) /* write min col pattern @ min col adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write row 14 wrap adr */
+ movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
+ movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
+ movl %eax, (%esi) /* write max row pattern at max row adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write row 13 wrap adr */
+ movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
+ movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
+ movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write row 12 wrap adr */
+ movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
+ movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
+ movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */
+ movl (%esi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /* write row 11 wrap adr */
+ movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
+ movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
+ movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */
+ movl (%edi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
- movl $COL10_ADR, %esi /* set address to 10 col wrap address */
- movl $COL10_DATA, %eax /* pattern for 10 col wrap */
- movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write col 9 wrap adr
- */
- movl $COL09_ADR, %esi /* set address to 9 col wrap address */
- movl $COL09_DATA, %eax /* pattern for 9 col wrap */
- movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write col 8 wrap adr
- */
- movl $COL08_ADR, %esi /* set address to min(8) col wrap address */
- movl $COL08_DATA, %eax /* pattern for min (8) col wrap */
- movl %eax, (%esi) /* write min col pattern @ min col adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 14 wrap adr
- */
- movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */
- movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */
- movl %eax, (%esi) /* write max row pattern at max row adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 13 wrap adr
- */
- movl $ROW13_ADR, %esi /* set address to 13 row wrap address */
- movl $ROW13_DATA, %eax /* pattern for 13 row wrap */
- movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 12 wrap adr
- */
- movl $ROW12_ADR, %esi /* set address to 12 row wrap address */
- movl $ROW12_DATA, %eax /* pattern for 12 row wrap */
- movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */
- movl (%esi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 11 wrap adr
- */
- movl $ROW11_ADR, %edi /* set address to 11 row wrap address */
- movl $ROW11_DATA, %eax /* pattern for 11 row wrap */
- movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */
- movl (%edi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * write row 10 wrap adr --- this write is really to determine number of banks
- */
- movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
- movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
- movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */
- movl (%edi), %ebx /* optional read */
- cmpl %ebx,%eax /* to verify write */
- jnz bad_ram /* this ram is bad */
- /*
- * read data @ row 12 wrap adr to determine * banks,
- * and read data @ row 14 wrap adr to determine * rows.
- * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
- * if data @ row 12 wrap == 11 or 12, we have 4 banks,
- */
- xorw %di,%di /* value for 2 banks in DI */
- movl (%esi), %ebx /* read from 12 row wrap to check banks
- * (esi is setup from the write to row 12 wrap) */
- cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */
- jz only2 /* if pattern == AA, we only have 2 banks */
+ /*
+ * write row 10 wrap adr --- this write is really to determine
+ * number of banks
+ */
+ movl $ROW10_ADR, %edi /* set address to 10 row wrap address */
+ movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */
+ movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */
+ movl (%edi), %ebx /* optional read */
+ cmpl %ebx, %eax /* to verify write */
+ jnz bad_ram /* this ram is bad */
+
+ /*
+ * read data @ row 12 wrap adr to determine * banks,
+ * and read data @ row 14 wrap adr to determine * rows.
+ * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
+ * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
+ * if data @ row 12 wrap == 11 or 12, we have 4 banks,
+ */
+ xorw %di, %di /* value for 2 banks in DI */
+ movl (%esi), %ebx /* read from 12 row wrap to check banks */
+ /* (esi is setup from the write to row 12 wrap) */
+ cmpl %ebx, %eax /* check for AA pattern (eax holds the aa pattern) */
+ jz only2 /* if pattern == AA, we only have 2 banks */
/* 4 banks */
- movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */
- cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
- jz only2
- cmpl $ROW12_DATA, %ebx /* and 12 */
- jnz bad_ram /* its bad if not 11 or 12! */
+ movw $0x008, %di /* value for 4 banks in DI (BNK_CNT bit) */
+ cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */
+ jz only2
+ cmpl $ROW12_DATA, %ebx /* and 12 */
+ jnz bad_ram /* its bad if not 11 or 12! */
/* fall through */
only2:
/*
* validate row mask
*/
- movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
- movl (%esi), %eax /* read actual number of rows @ row14 adr */
+ movl $ROW14_ADR, %esi /* set address back to max row wrap addr */
+ movl (%esi), %eax /* read actual number of rows @ row14 adr */
- cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
- jb bad_ram
+ cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */
+ jb bad_ram
- cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
- ja bad_ram
+ cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */
+ ja bad_ram
+
+ cmpb %ah, %al /* verify all 4 bytes of dword same */
+ jnz bad_ram
+ movl %eax, %ebx
+ shrl $16, %ebx
+ cmpw %bx, %ax
+ jnz bad_ram
+
+ /*
+ * read col 11 wrap adr for real column data value
+ */
+ movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
+ movl (%esi), %eax /* read real col number at max col adr */
+
+ /*
+ * validate column data
+ */
+ cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
+ jb bad_ram
+
+ cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
+ ja bad_ram
+
+ subl $COL08_DATA, %eax /* normalize column data to zero */
+ jc bad_ram
+ cmpb %ah, %al /* verify all 4 bytes of dword equal */
+ jnz bad_ram
+ movl %eax, %edx
+ shrl $16, %edx
+ cmpw %dx, %ax
+ jnz bad_ram
+
+ /*
+ * merge bank and col data together
+ */
+ addw %di, %dx /* merge of bank and col info in dl */
+
+ /*
+ * fix ending addr mask based upon col info
+ */
+ movb $0x03, %al
+ subb %dh, %al /* dh contains the overflow from the bank/col merge */
+ movb %bl, %dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
+ xchgw %cx, %ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
+ shrb %cl, %dh
+ incb %dh /* ending addr is 1 greater than real end */
+ xchgw %cx, %ax /* cx is bank number again */
- cmpb %ah,%al /* verify all 4 bytes of dword same */
- jnz bad_ram
- movl %eax,%ebx
- shrl $16,%ebx
- cmpw %bx,%ax
- jnz bad_ram
- /*
- * read col 11 wrap adr for real column data value
- */
- movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */
- movl (%esi), %eax /* read real col number at max col adr */
- /*
- * validate column data
- */
- cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */
- jb bad_ram
-
- cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */
- ja bad_ram
-
- subl $COL08_DATA, %eax /* normalize column data to zero */
- jc bad_ram
- cmpb %ah,%al /* verify all 4 bytes of dword equal */
- jnz bad_ram
- movl %eax,%edx
- shrl $16,%edx
- cmpw %dx,%ax
- jnz bad_ram
- /*
- * merge bank and col data together
- */
- addw %di,%dx /* merge of bank and col info in dl */
- /*
- * fix ending addr mask based upon col info
- */
- movb $3,%al
- subb %dh,%al /* dh contains the overflow from the bank/col merge */
- movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */
- xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */
- shrb %cl,%dh /* */
- incb %dh /* ending addr is 1 greater than real end */
- xchgw %cx,%ax /* cx is bank number again */
- /*
- * issue all banks precharge
- */
bad_reint:
- movl $DRCCTL, %esi /* setup DRAM control register with */
- movb $0x2,%al /* All banks precharge */
- movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
- movw %ax, (%esi)
+ /*
+ * issue all banks precharge
+ */
+ movl $DRCCTL, %esi /* setup DRAM control register with */
+ movb $0x02, %al /* All banks precharge */
+ movb %al, (%esi)
+ movl $CACHELINESZ, %esi /* address to init read buffer */
+ movw %ax, (%esi)
- /*
- * update ENDING ADDRESS REGISTER
- */
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movl %ecx,%ebx
+ /*
+ * update ENDING ADDRESS REGISTER
+ */
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movl %ecx, %ebx
addl %ebx, %edi
- movb %dh, (%edi)
- /*
- * update CONFIG REGISTER
- */
- xorb %dh,%dh
- movw $0x00f,%bx
- movw %cx,%ax
- shlw $2,%ax
- xchgw %cx,%ax
- shlw %cl,%dx
- shlw %cl,%bx
- notw %bx
- xchgw %cx,%ax
- movl $DRCCFG, %edi
- mov (%edi), %ax
- andw %bx,%ax
- orw %dx,%ax
- movw %ax, (%edi)
- jcxz cleanup
-
- decw %cx
- movl %ecx,%ebx
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movb $0xff,%al
+ movb %dh, (%edi)
+
+ /*
+ * update CONFIG REGISTER
+ */
+ xorb %dh, %dh
+ movw $0x000f, %bx
+ movw %cx, %ax
+ shlw $2, %ax
+ xchgw %cx, %ax
+ shlw %cl, %dx
+ shlw %cl, %bx
+ notw %bx
+ xchgw %cx, %ax
+ movl $DRCCFG, %edi
+ movw (%edi), %ax
+ andw %bx, %ax
+ orw %dx, %ax
+ movw %ax, (%edi)
+ jcxz cleanup
+
+ decw %cx
+ movl %ecx, %ebx
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movb $0xff, %al
addl %ebx, %edi
- movb %al, (%edi)
- /*
- * set control register to NORMAL mode
- */
- movl $DRCCTL, %esi /* setup DRAM control register with */
- movb $0x0,%al /* Normal mode value */
- movb %al, (%esi)
- movl $CACHELINESZ, %esi /* address to init read buffer */
- movw %ax, (%esi)
- jmp nextbank
+ movb %al, (%edi)
+
+ /*
+ * set control register to NORMAL mode
+ */
+ movl $DRCCTL, %esi /* setup DRAM control register with */
+ movb $0x00, %al /* Normal mode value */
+ movb %al, (%esi)
+ movl $CACHELINESZ, %esi /* address to init read buffer */
+ movw %ax, (%esi)
+ jmp nextbank
cleanup:
- movl $DRCBENDADR, %edi /* DRAM ending address register */
- movw $4,%cx
- xorw %ax,%ax
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movw $0x04, %cx
+ xorw %ax, %ax
cleanuplp:
- movb (%edi), %al
- orb %al,%al
- jz emptybank
+ movb (%edi), %al
+ orb %al, %al
+ jz emptybank
- addb %ah,%al
- jns nottoomuch
+ addb %ah, %al
+ jns nottoomuch
- movb $0x7f,%al
+ movb $0x7f, %al
nottoomuch:
- movb %al,%ah
- orb $0x80,%al
- movb %al, (%edi)
+ movb %al, %ah
+ orb $0x80, %al
+ movb %al, (%edi)
emptybank:
- incl %edi
- loop cleanuplp
+ incl %edi
+ loop cleanuplp
#if defined CONFIG_SYS_SDRAM_DRCTMCTL
/* just have your hardware desinger _GIVE_ you what you need here! */
- movl $DRCTMCTL, %edi
- movb $CONFIG_SYS_SDRAM_DRCTMCTL,%al
- movb %al, (%edi)
+ movl $DRCTMCTL, %edi
+ movb $CONFIG_SYS_SDRAM_DRCTMCTL, %al
+ movb %al, (%edi)
#else
#if defined(CONFIG_SYS_SDRAM_CAS_LATENCY_2T) || defined(CONFIG_SYS_SDRAM_CAS_LATENCY_3T)
- /* set the CAS latency now since it is hard to do
- * when we run from the RAM */
- movl $DRCTMCTL, %edi /* DRAM timing register */
- movb (%edi), %al
+ /*
+ * Set the CAS latency now since it is hard to do
+ * when we run from the RAM
+ */
+ movl $DRCTMCTL, %edi /* DRAM timing register */
+ movb (%edi), %al
#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_2T
- andb $0xef, %al
+ andb $0xef, %al
#endif
#ifdef CONFIG_SYS_SDRAM_CAS_LATENCY_3T
- orb $0x10, %al
+ orb $0x10, %al
#endif
- movb %al, (%edi)
+ movb %al, (%edi)
#endif
#endif
- movl $DRCCTL, %edi /* DRAM Control register */
- movb $0x3,%al /* Load mode register cmd */
- movb %al, (%edi)
- movw %ax, (%esi)
+ movl $DRCCTL, %edi /* DRAM Control register */
+ movb $0x03, %al /* Load mode register cmd */
+ movb %al, (%edi)
+ movw %ax, (%esi)
- movl $DRCCTL, %edi /* DRAM Control register */
- movb $0x18,%al /* Enable refresh and NORMAL mode */
- movb %al, (%edi)
+ movl $DRCCTL, %edi /* DRAM Control register */
+ movb $0x18, %al /* Enable refresh and NORMAL mode */
+ movb %al, (%edi)
- jmp dram_done
+ jmp dram_done
bad_ram:
- xorl %edx,%edx
- xorl %edi,%edi
- jmp bad_reint
+ xorl %edx, %edx
+ xorl %edi, %edi
+ jmp bad_reint
dram_done:
+ /* Restore Boot Flags */
+ movl %ebx, %ebp
+ jmp mem_init_ret
#if CONFIG_SYS_SDRAM_ECC_ENABLE
- /*
- * We are in the middle of an existing 'call' - Need to store the
- * existing return address before making another 'call'
- */
- movl %ebp, %ebx
-
- /* Get the memory size */
- movl $init_ecc, %ebp
- jmpl get_mem_size
-
+.globl init_ecc
init_ecc:
- /* Restore the orignal return address */
- movl %ebx, %ebp
-
/* A nominal memory test: just a byte at each address line */
- movl %eax, %ecx
- shrl $0x1, %ecx
+ movl %eax, %ecx
+ shrl $0x1, %ecx
movl $0x1, %edi
memtest0:
movb $0xa5, (%edi)
- cmpb $0xa5, (%edi)
+ cmpb $0xa5, (%edi)
jne out
- shrl $1, %ecx
- andl %ecx,%ecx
+ shrl $0x1, %ecx
+ andl %ecx, %ecx
jz set_ecc
- shll $1, %edi
+ shll $0x1, %edi
jmp memtest0
set_ecc:
@@ -570,25 +547,28 @@ set_ecc:
xorl %esi, %esi
xorl %edi, %edi
xorl %eax, %eax
- shrl $2, %ecx
+ shrl $0x2, %ecx
cld
rep stosl
- /* enable read, write buffers */
- movb $0x11, %al
- movl $DBCTL, %edi
- movb %al, (%edi)
- /* enable NMI mapping for ECC */
- movl $ECCINT, %edi
- mov $0x10, %al
- movb %al, (%edi)
- /* Turn on ECC */
- movl $ECCCTL, %edi
- mov $0x05, %al
- movb %al, (%edi)
-#endif
+
+ /* enable read, write buffers */
+ movb $0x11, %al
+ movl $DBCTL, %edi
+ movb %al, (%edi)
+
+ /* enable NMI mapping for ECC */
+ movl $ECCINT, %edi
+ movb $0x10, %al
+ movb %al, (%edi)
+
+ /* Turn on ECC */
+ movl $ECCCTL, %edi
+ movb $0x05, %al
+ movb %al,(%edi)
out:
- jmp *%ebp
+ jmp init_ecc_ret
+#endif
/*
* Read and decode the sc520 DRCBENDADR MMCR and return the number of
@@ -596,7 +576,7 @@ out:
*/
.globl get_mem_size
get_mem_size:
- movl $DRCBENDADR, %edi /* DRAM ending address register */
+ movl $DRCBENDADR, %edi /* DRAM ending address register */
bank0: movl (%edi), %eax
movl %eax, %ecx
@@ -604,7 +584,7 @@ bank0: movl (%edi), %eax
jz bank1
andl $0x0000007f, %eax
shll $22, %eax
- movl %eax, %ebx
+ movl %eax, %edx
bank1: movl (%edi), %eax
movl %eax, %ecx
@@ -612,7 +592,7 @@ bank1: movl (%edi), %eax
jz bank2
andl $0x00007f00, %eax
shll $14, %eax
- movl %eax, %ebx
+ movl %eax, %edx
bank2: movl (%edi), %eax
movl %eax, %ecx
@@ -620,7 +600,7 @@ bank2: movl (%edi), %eax
jz bank3
andl $0x007f0000, %eax
shll $6, %eax
- movl %eax, %ebx
+ movl %eax, %edx
bank3: movl (%edi), %eax
movl %eax, %ecx
@@ -628,8 +608,8 @@ bank3: movl (%edi), %eax
jz done
andl $0x7f000000, %eax
shrl $2, %eax
- movl %eax, %ebx
+ movl %eax, %edx
done:
- movl %ebx, %eax
- jmp *%ebp
+ movl %edx, %eax
+ jmp get_mem_size_ret
diff --git a/arch/i386/cpu/start.S b/arch/i386/cpu/start.S
index 7def8de..829468f 100644
--- a/arch/i386/cpu/start.S
+++ b/arch/i386/cpu/start.S
@@ -1,7 +1,7 @@
/*
* U-boot - i386 Startup Code
*
- * Copyright (c) 2002 Omicron Ceti AB, Daniel Engström <denaiel@omicron.se>
+ * Copyright (c) 2002 Omicron Ceti AB, Daniel Engstr�m <denaiel@omicron.se>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -25,6 +25,7 @@
#include <config.h>
#include <version.h>
+#include <asm/global_data.h>
.section .text
@@ -45,175 +46,98 @@ _i386boot_start:
/* Turn of cache (this might require a 486-class CPU) */
movl %cr0, %eax
- orl $0x60000000,%eax
+ orl $0x60000000, %eax
movl %eax, %cr0
wbinvd
/* Tell 32-bit code it is being entered from an in-RAM copy */
- movw $0x0000, %bx
+ movw $GD_FLG_WARM_BOOT, %bx
_start:
/* This is the 32-bit cold-reset entry point */
- movl $0x18,%eax /* Load our segement registes, the
+ movl $0x18, %eax /* Load our segement registes, the
* gdt have already been loaded by start16.S */
- movw %ax,%fs
- movw %ax,%ds
- movw %ax,%gs
- movw %ax,%es
- movw %ax,%ss
+ movw %ax, %fs
+ movw %ax, %ds
+ movw %ax, %gs
+ movw %ax, %es
+ movw %ax, %ss
/* Clear the interupt vectors */
lidt blank_idt_ptr
- /*
- * Skip low-level board and memory initialization if not starting
- * from cold-reset. This allows us to do a fail safe boot-strap
- * into a new build of U-Boot from a known-good boot flash
- */
- movw $0x0001, %ax
- cmpw %ax, %bx
- jne mem_init_ret
-
- /* We call a few functions in the board support package
- * since we have no stack yet we'll have to use %ebp
- * to store the return address */
+ /* Skip low-level initialization if not starting from cold-reset */
+ movl %ebx, %ecx
+ andl $GD_FLG_COLD_BOOT, %ecx
+ jz skip_mem_init
/* Early platform init (setup gpio, etc ) */
- mov $early_board_init_ret, %ebp
jmp early_board_init
+.globl early_board_init_ret
early_board_init_ret:
- /* The __port80 entry-point should be usabe by now */
- /* so we try to indicate progress */
- movw $0x01, %ax
- movl $.progress0, %ebp
- jmp show_boot_progress_asm
-.progress0:
-
/* size memory */
- mov $mem_init_ret, %ebp
- jmp mem_init
+ jmp mem_init
+.globl mem_init_ret
mem_init_ret:
+skip_mem_init:
/* fetch memory size (into %eax) */
- mov $get_mem_size_ret, %ebp
- jmp get_mem_size
+ jmp get_mem_size
+.globl get_mem_size_ret
get_mem_size_ret:
- /*
- * We are now in 'Flat Protected Mode' and we know how much memory
- * the board has. The (temporary) Global Descriptor Table is not
- * in a 'Safe' place (it is either in Flash which can be erased or
- * reprogrammed or in a fail-safe boot-strap image which could be
- * over-written).
- *
- * Move the final gdt to a safe place (top of RAM) and load it.
- * This is not a trivial excercise - the lgdt instruction does not
- * have a register operand (memory only) and we may well be
- * running from Flash, so self modifying code will not work here.
- * To overcome this, we copy a stub into upper memory along with
- * the GDT.
- */
+#if CONFIG_SYS_SDRAM_ECC_ENABLE
+ /* Skip ECC initialization if not starting from cold-reset */
+ movl %ebx, %ecx
+ andl $GD_FLG_COLD_BOOT, %ecx
+ jz init_ecc_ret
+ jmp init_ecc
- /* Reduce upper memory limit by (Stub + GDT Pointer + GDT) */
- subl $(end_gdt_setup - start_gdt_setup), %eax
-
- /* Copy the GDT and Stub */
- movl $start_gdt_setup, %esi
- movl %eax, %edi
- movl $(end_gdt_setup - start_gdt_setup), %ecx
- shrl $2, %ecx
- cld
- rep movsl
+.globl init_ecc_ret
+init_ecc_ret:
+#endif
- /* write the lgdt 'parameter' */
- subl $(jmp_instr - start_gdt_setup - 4), %ebp
- addl %eax, %ebp
- movl $(gdt_ptr - start_gdt_setup), %ebx
- addl %eax, %ebx
- movl %ebx, (%ebp)
-
- /* write the gdt address into the pointer */
- movl $(gdt_addr - start_gdt_setup), %ebp
- addl %eax, %ebp
- movl $(gdt - start_gdt_setup), %ebx
- addl %eax, %ebx
- movl %ebx, (%ebp)
-
- /* Save the return address */
- movl $load_gdt_ret, %ebp
-
- /* Load the new (safe) Global Descriptor Table */
- jmp *%eax
-
-load_gdt_ret:
/* Check we have enough memory for stack */
movl $CONFIG_SYS_STACK_SIZE, %ecx
cmpl %ecx, %eax
- jae mem_ok
-
- /* indicate (lack of) progress */
- movw $0x81, %ax
- movl $.progress0a, %ebp
- jmp show_boot_progress_asm
-.progress0a:
- jmp die
+ jb die
mem_ok:
/* Set stack pointer to upper memory limit*/
- movl %eax, %esp
-
- /* indicate progress */
- movw $0x02, %ax
- movl $.progress1, %ebp
- jmp show_boot_progress_asm
-.progress1:
+ movl %eax, %esp
/* Test the stack */
pushl $0
- popl %eax
- cmpl $0, %eax
- jne no_stack
+ popl %ecx
+ cmpl $0, %ecx
+ jne die
push $0x55aa55aa
- popl %ebx
- cmpl $0x55aa55aa, %ebx
- je stack_ok
-
-no_stack:
- /* indicate (lack of) progress */
- movw $0x82, %ax
- movl $.progress1a, %ebp
- jmp show_boot_progress_asm
-.progress1a:
- jmp die
+ popl %ecx
+ cmpl $0x55aa55aa, %ecx
+ jne die
+ wbinvd
-stack_ok:
- /* indicate progress */
- movw $0x03, %ax
- movl $.progress2, %ebp
- jmp show_boot_progress_asm
-.progress2:
+ /* Determine our load offset */
+ call 1f
+1: popl %ecx
+ subl $1b, %ecx
- wbinvd
+ /* Set the upper memory limit parameter */
+ subl $CONFIG_SYS_STACK_SIZE, %eax
- /* Get upper memory limit */
- movl %esp, %ecx
- subl $CONFIG_SYS_STACK_SIZE, %ecx
+ /* Reserve space for global data */
+ subl $(GD_SIZE * 4), %eax
- /* Create a Stack Frame */
- pushl %ebp
- movl %esp, %ebp
+ /* %eax points to the global data structure */
+ movl %esp, (GD_RAM_SIZE * 4)(%eax)
+ movl %ebx, (GD_FLAGS * 4)(%eax)
+ movl %ecx, (GD_LOAD_OFF * 4)(%eax)
- /* stack_limit parameter */
- pushl %ecx
call board_init_f /* Enter, U-boot! */
/* indicate (lack of) progress */
movw $0x85, %ax
- movl $.progress4a, %ebp
- jmp show_boot_progress_asm
-.progress4a:
-
die: hlt
jmp die
hlt
@@ -221,52 +145,3 @@ die: hlt
blank_idt_ptr:
.word 0 /* limit */
.long 0 /* base */
-
-.align 4
-start_gdt_setup:
- lgdt gdt_ptr
-jmp_instr:
- jmp *%ebp
-
-.align 4
-gdt_ptr:
- .word 0x30 /* limit (48 bytes = 6 GDT entries) */
-gdt_addr:
- .long gdt /* base */
-
- /* The GDT table ...
- *
- * Selector Type
- * 0x00 NULL
- * 0x08 Unused
- * 0x10 32bit code
- * 0x18 32bit data/stack
- * 0x20 16bit code
- * 0x28 16bit data/stack
- */
-
-.align 4
-gdt:
- .word 0, 0, 0, 0 /* NULL */
- .word 0, 0, 0, 0 /* unused */
-
- .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
- .word 0 /* base address = 0 */
- .word 0x9B00 /* code read/exec */
- .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
-
- .word 0xFFFF /* 4Gb - (0x100000*0x1000 = 4Gb) */
- .word 0x0 /* base address = 0 */
- .word 0x9300 /* data read/write */
- .word 0x00CF /* granularity = 4096, 386 (+5th nibble of limit) */
-
- .word 0xFFFF /* 64kb */
- .word 0 /* base address = 0 */
- .word 0x9b00 /* data read/write */
- .word 0x0010 /* granularity = 1 (+5th nibble of limit) */
-
- .word 0xFFFF /* 64kb */
- .word 0 /* base address = 0 */
- .word 0x9300 /* data read/write */
- .word 0x0010 /* granularity = 1 (+5th nibble of limit) */
-end_gdt_setup:
diff --git a/arch/i386/cpu/start16.S b/arch/i386/cpu/start16.S
index ebe5835..0a5823d 100644
--- a/arch/i386/cpu/start16.S
+++ b/arch/i386/cpu/start16.S
@@ -22,6 +22,7 @@
* MA 02111-1307 USA
*/
+#include <asm/global_data.h>
#define BOOT_SEG 0xffff0000 /* linear segment of boot code */
#define a32 .byte 0x67;
@@ -31,16 +32,20 @@
.code16
.globl start16
start16:
- /* First we let the BSP do some early initialization
+ /* Set the Cold Boot / Hard Reset flag */
+ movl $GD_FLG_COLD_BOOT, %ebx
+
+ /*
+ * First we let the BSP do some early initialization
* this code have to map the flash to its final position
*/
- mov $board_init16_ret, %bp
jmp board_init16
+.globl board_init16_ret
board_init16_ret:
/* Turn of cache (this might require a 486-class CPU) */
movl %cr0, %eax
- orl $0x60000000,%eax
+ orl $0x60000000, %eax
movl %eax, %cr0
wbinvd
@@ -50,18 +55,15 @@ o32 cs lgdt gdt_ptr
/* Now, we enter protected mode */
movl %cr0, %eax
- orl $1,%eax
+ orl $1, %eax
movl %eax, %cr0
/* Flush the prefetch queue */
jmp ff
ff:
- /* Tell 32-bit code it is being entered from hard-reset */
- movw $0x0001, %bx
-
/* Finally jump to the 32bit initialization code */
movw $code32start, %ax
- movw %ax,%bp
+ movw %ax, %bp
o32 cs ljmp *(%bp)
/* 48-bit far pointer */
diff --git a/arch/i386/include/asm/config.h b/arch/i386/include/asm/config.h
index 049c44e..1952de7 100644
--- a/arch/i386/include/asm/config.h
+++ b/arch/i386/include/asm/config.h
@@ -21,4 +21,6 @@
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
+#define CONFIG_RELOC_FIXUP_WORKS
+
#endif
diff --git a/arch/i386/include/asm/global_data.h b/arch/i386/include/asm/global_data.h
index 3a9adc9..5971123 100644
--- a/arch/i386/include/asm/global_data.h
+++ b/arch/i386/include/asm/global_data.h
@@ -33,12 +33,15 @@
* Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
*/
+#ifndef __ASSEMBLY__
+
typedef struct {
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
unsigned long have_console; /* serial_init() was called */
unsigned long reloc_off; /* Relocation Offset */
+ unsigned long load_off; /* Load Offset */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long cpu_clk; /* CPU clock in Hz! */
@@ -49,6 +52,27 @@ typedef struct {
char env_buf[32]; /* buffer for getenv() before reloc. */
} gd_t;
+extern gd_t *gd;
+
+#endif
+
+/* Word Offsets into Global Data - MUST match struct gd_t */
+#define GD_BD 0
+#define GD_FLAGS 1
+#define GD_BAUDRATE 2
+#define GD_HAVE_CONSOLE 3
+#define GD_RELOC_OFF 4
+#define GD_LOAD_OFF 5
+#define GD_ENV_ADDR 6
+#define GD_ENV_VALID 7
+#define GD_CPU_CLK 8
+#define GD_BUS_CLK 9
+#define GD_RAM_SIZE 10
+#define GD_RESET_STATUS 11
+#define GD_JT 12
+
+#define GD_SIZE 13
+
/*
* Global Data Flags
*/
@@ -60,8 +84,9 @@ typedef struct {
#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
+#define GD_FLG_COLD_BOOT 0x00100 /* Cold Boot */
+#define GD_FLG_WARM_BOOT 0x00200 /* Warm Boot */
-extern gd_t *gd;
#define DECLARE_GLOBAL_DATA_PTR
diff --git a/arch/i386/include/asm/interrupt.h b/arch/i386/include/asm/interrupt.h
index 07426fe..d32ef8b 100644
--- a/arch/i386/include/asm/interrupt.h
+++ b/arch/i386/include/asm/interrupt.h
@@ -27,6 +27,8 @@
#ifndef __ASM_INTERRUPT_H_
#define __ASM_INTERRUPT_H_ 1
+#include <asm/types.h>
+
/* arch/i386/cpu/interrupts.c */
void set_vector(u8 intnum, void *routine);
@@ -41,6 +43,4 @@ void specific_eoi(int irq);
extern char exception_stack[];
-#define __isr__ void __attribute__ ((regparm(0)))
-
#endif
diff --git a/arch/i386/include/asm/ptrace.h b/arch/i386/include/asm/ptrace.h
index 750e40d..a727dbf 100644
--- a/arch/i386/include/asm/ptrace.h
+++ b/arch/i386/include/asm/ptrace.h
@@ -1,6 +1,8 @@
#ifndef _I386_PTRACE_H
#define _I386_PTRACE_H
+#include <asm/types.h>
+
#define EBX 0
#define ECX 1
#define EDX 2
@@ -43,6 +45,28 @@ struct pt_regs {
int xss;
} __attribute__ ((packed));
+struct irq_regs {
+ /* Pushed by irq_common_entry */
+ long ebx;
+ long ecx;
+ long edx;
+ long esi;
+ long edi;
+ long ebp;
+ long esp;
+ long eax;
+ long xds;
+ long xes;
+ long xfs;
+ long xgs;
+ long xss;
+ /* Pushed by vector handler (irq_<num>) */
+ long irq_id;
+ /* Pushed by cpu in response to interrupt */
+ long eip;
+ long xcs;
+ long eflags;
+} __attribute__ ((packed));
/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
#define PTRACE_GETREGS 12
diff --git a/arch/i386/lib/bios_setup.c b/arch/i386/lib/bios_setup.c
index a92b77e..75407c1 100644
--- a/arch/i386/lib/bios_setup.c
+++ b/arch/i386/lib/bios_setup.c
@@ -45,8 +45,8 @@ DECLARE_GLOBAL_DATA_PTR;
#define BIOS_BASE ((char*)0xf0000)
#define BIOS_CS 0xf000
-extern ulong _i386boot_bios;
-extern ulong _i386boot_bios_size;
+extern ulong __bios_start;
+extern ulong __bios_size;
/* these are defined in a 16bit segment and needs
* to be accessed with the RELOC_16_xxxx() macros below
@@ -141,8 +141,8 @@ static void setvector(int vector, u16 segment, void *handler)
int bios_setup(void)
{
- ulong i386boot_bios = (ulong)&_i386boot_bios + gd->reloc_off;
- ulong i386boot_bios_size = (ulong)&_i386boot_bios_size;
+ ulong bios_start = (ulong)&__bios_start + gd->reloc_off;
+ ulong bios_size = (ulong)&__bios_size;
static int done=0;
int vector;
@@ -154,13 +154,13 @@ int bios_setup(void)
}
done = 1;
- if (i386boot_bios_size > 65536) {
+ if (bios_size > 65536) {
printf("BIOS too large (%ld bytes, max is 65536)\n",
- i386boot_bios_size);
+ bios_size);
return -1;
}
- memcpy(BIOS_BASE, (void*)i386boot_bios, i386boot_bios_size);
+ memcpy(BIOS_BASE, (void*)bios_start, bios_size);
/* clear bda */
memset(BIOS_DATA, 0, BIOS_DATA_SIZE);
diff --git a/arch/i386/lib/board.c b/arch/i386/lib/board.c
index 5002203..1129918 100644
--- a/arch/i386/lib/board.c
+++ b/arch/i386/lib/board.c
@@ -48,13 +48,12 @@
DECLARE_GLOBAL_DATA_PTR;
/* Exports from the Linker Script */
-extern ulong _i386boot_text_start;
-extern ulong _i386boot_rel_dyn_start;
-extern ulong _i386boot_rel_dyn_end;
-extern ulong _i386boot_bss_start;
-extern ulong _i386boot_bss_size;
-
-void ram_bootstrap (void *, ulong);
+extern ulong __text_start;
+extern ulong __data_end;
+extern ulong __rel_dyn_start;
+extern ulong __rel_dyn_end;
+extern ulong __bss_start;
+extern ulong __bss_end;
const char version_string[] =
U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")";
@@ -164,85 +163,77 @@ init_fnc_t *init_sequence[] = {
NULL,
};
-static gd_t gd_data;
gd_t *gd;
/*
* Load U-Boot into RAM, initialize BSS, perform relocation adjustments
*/
-void board_init_f (ulong stack_limit)
+void board_init_f (ulong gdp)
{
- void *text_start = &_i386boot_text_start;
- void *u_boot_cmd_end = &__u_boot_cmd_end;
- Elf32_Rel *rel_dyn_start = (Elf32_Rel *)&_i386boot_rel_dyn_start;
- Elf32_Rel *rel_dyn_end = (Elf32_Rel *)&_i386boot_rel_dyn_end;
- void *bss_start = &_i386boot_bss_start;
- ulong bss_size = (ulong)&_i386boot_bss_size;
-
- ulong uboot_size;
+ void *text_start = &__text_start;
+ void *data_end = &__data_end;
+ void *rel_dyn_start = &__rel_dyn_start;
+ void *rel_dyn_end = &__rel_dyn_end;
+ void *bss_start = &__bss_start;
+ void *bss_end = &__bss_end;
+
+ ulong *dst_addr;
+ ulong *src_addr;
+ ulong *end_addr;
+
void *dest_addr;
ulong rel_offset;
- Elf32_Rel *re;
+ Elf32_Rel *re_src;
+ Elf32_Rel *re_end;
- void (*start_func)(void *, ulong);
-
- uboot_size = (ulong)u_boot_cmd_end - (ulong)text_start;
- dest_addr = (void *)stack_limit - (uboot_size + (ulong)bss_size);
+ /* Calculate destination RAM Address and relocation offset */
+ dest_addr = (void *)gdp - (bss_end - text_start);
rel_offset = text_start - dest_addr;
- start_func = ram_bootstrap - rel_offset;
- /* First stage CPU initialization */
- if (cpu_init_f() != 0)
- hang();
+ /* Perform low-level initialization only when cold booted */
+ if (((gd_t *)gdp)->flags & GD_FLG_COLD_BOOT) {
+ /* First stage CPU initialization */
+ if (cpu_init_f() != 0)
+ hang();
- /* First stage Board initialization */
- if (board_early_init_f() != 0)
- hang();
+ /* First stage Board initialization */
+ if (board_early_init_f() != 0)
+ hang();
+ }
/* Copy U-Boot into RAM */
- memcpy(dest_addr, text_start, uboot_size);
+ dst_addr = (ulong *)dest_addr;
+ src_addr = (ulong *)(text_start + ((gd_t *)gdp)->load_off);
+ end_addr = (ulong *)(data_end + ((gd_t *)gdp)->load_off);
+
+ while (src_addr < end_addr)
+ *dst_addr++ = *src_addr++;
/* Clear BSS */
- memset(bss_start - rel_offset, 0, bss_size);
+ dst_addr = (ulong *)(bss_start - rel_offset);
+ end_addr = (ulong *)(bss_end - rel_offset);
+
+ while (dst_addr < end_addr)
+ *dst_addr++ = 0x00000000;
/* Perform relocation adjustments */
- for (re = rel_dyn_start; re < rel_dyn_end; re++)
- {
- if (re->r_offset >= TEXT_BASE)
- if (*(ulong *)re->r_offset >= TEXT_BASE)
- *(ulong *)(re->r_offset - rel_offset) -= (Elf32_Addr)rel_offset;
- }
+ re_src = (Elf32_Rel *)(rel_dyn_start + ((gd_t *)gdp)->load_off);
+ re_end = (Elf32_Rel *)(rel_dyn_end + ((gd_t *)gdp)->load_off);
- /* Enter the relocated U-Boot! */
- start_func(dest_addr, rel_offset);
- /* NOTREACHED - board_init_f() does not return */
- while(1);
-}
+ do {
+ if (re_src->r_offset >= TEXT_BASE)
+ if (*(Elf32_Addr *)(re_src->r_offset - rel_offset) >= TEXT_BASE)
+ *(Elf32_Addr *)(re_src->r_offset - rel_offset) -= rel_offset;
+ } while (re_src++ < re_end);
-/*
- * We cannot initialize gd_data in board_init_f() because we would be
- * attempting to write to flash (I have even tried using manual relocation
- * adjustments on pointers but it just won't work) and board_init_r() does
- * not have enough arguments to allow us to pass the relocation offset
- * straight up. This bootstrap function (which runs in RAM) is used to
- * setup gd_data in order to pass the relocation offset to the rest of
- * U-Boot.
- *
- * TODO: The compiler optimization barrier is intended to stop GCC from
- * optimizing this function into board_init_f(). It seems to work without
- * it, but I've left it in to be sure. I think also that the barrier in
- * board_init_r() is no longer needed, but left it in 'just in case'
- */
-void ram_bootstrap (void *dest_addr, ulong rel_offset)
-{
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("": : :"memory");
+ ((gd_t *)gdp)->reloc_off = rel_offset;
+ ((gd_t *)gdp)->flags |= GD_FLG_RELOC;
- /* tell others: relocation done */
- gd_data.reloc_off = rel_offset;
- gd_data.flags |= GD_FLG_RELOC;
+ /* Enter the relocated U-Boot! */
+ (board_init_r - rel_offset)((gd_t *)gdp, (ulong)dest_addr);
- board_init_r(&gd_data, (ulong)dest_addr);
+ /* NOTREACHED - board_init_f() does not return */
+ while(1);
}
void board_init_r(gd_t *id, ulong dest_addr)
diff --git a/arch/i386/lib/realmode.c b/arch/i386/lib/realmode.c
index b3f5123..60fe181 100644
--- a/arch/i386/lib/realmode.c
+++ b/arch/i386/lib/realmode.c
@@ -31,23 +31,23 @@
#define REALMODE_MAILBOX ((char*)0xe00)
-extern ulong _i386boot_realmode;
-extern ulong _i386boot_realmode_size;
+extern ulong __realmode_start;
+extern ulong __realmode_size;
extern char realmode_enter;
int realmode_setup(void)
{
- ulong i386boot_realmode = (ulong)&_i386boot_realmode + gd->reloc_off;
- ulong i386boot_realmode_size = (ulong)&_i386boot_realmode_size;
+ ulong realmode_start = (ulong)&__realmode_start + gd->reloc_off;
+ ulong realmode_size = (ulong)&__realmode_size;
/* copy the realmode switch code */
- if (i386boot_realmode_size > (REALMODE_MAILBOX-REALMODE_BASE)) {
+ if (realmode_size > (REALMODE_MAILBOX-REALMODE_BASE)) {
printf("realmode switch too large (%ld bytes, max is %d)\n",
- i386boot_realmode_size, (REALMODE_MAILBOX-REALMODE_BASE));
+ realmode_size, (REALMODE_MAILBOX-REALMODE_BASE));
return -1;
}
- memcpy(REALMODE_BASE, (void*)i386boot_realmode, i386boot_realmode_size);
+ memcpy(REALMODE_BASE, (void*)realmode_start, realmode_size);
asm("wbinvd\n");
return 0;
diff --git a/arch/i386/lib/zimage.c b/arch/i386/lib/zimage.c
index 89fe015..0c42072 100644
--- a/arch/i386/lib/zimage.c
+++ b/arch/i386/lib/zimage.c
@@ -248,7 +248,8 @@ void boot_zimage(void *setup_base)
int do_zboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
void *base_ptr;
- void *bzImage_addr;
+ void *bzImage_addr = NULL;
+ char *s;
ulong bzImage_size = 0;
disable_interrupts();
@@ -256,10 +257,17 @@ int do_zboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
/* Setup board for maximum PC/AT Compatibility */
setup_pcat_compatibility();
- /* argv[1] holds the address of the bzImage */
- bzImage_addr = (void *)simple_strtoul(argv[1], NULL, 16);
+ if (argc >= 2)
+ /* argv[1] holds the address of the bzImage */
+ s = argv[1];
+ else
+ s = getenv("fileaddr");
+
+ if (s)
+ bzImage_addr = (void *)simple_strtoul(s, NULL, 16);
- if (argc == 3)
+ if (argc >= 3)
+ /* argv[2] holds the size of the bzImage */
bzImage_size = simple_strtoul(argv[2], NULL, 16);
/* Lets look for*/
@@ -282,7 +290,7 @@ int do_zboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
U_BOOT_CMD(
- zboot, 3, 0, do_zboot,
+ zboot, 2, 0, do_zboot,
"Boot bzImage",
""
);
diff --git a/board/eNET/eNET_start.S b/board/eNET/eNET_start.S
index 1b07d62..137fe41 100644
--- a/board/eNET/eNET_start.S
+++ b/board/eNET/eNET_start.S
@@ -27,19 +27,7 @@
.globl early_board_init
early_board_init:
/* No 32-bit board specific initialisation */
- jmp *%ebp /* return to caller */
-
-.globl show_boot_progress_asm
-show_boot_progress_asm:
-
- movb %al, %dl /* Create Working Copy */
- andb $0x80, %dl /* Mask in only Error bit */
- shrb $0x02, %dl /* Shift Error bit to Error LED */
- andb $0x0f, %al /* Mask out 'Error' bit */
- orb %dl, %al /* Mask in ERR LED */
- movw $LED_LATCH_ADDRESS, %dx
- outb %al, %dx
- jmp *%ebp /* return to caller */
+ jmp early_board_init_ret
.globl cpu_halt_asm
cpu_halt_asm:
diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S
index af2c132..06cfd55 100644
--- a/board/eNET/eNET_start16.S
+++ b/board/eNET/eNET_start16.S
@@ -65,8 +65,7 @@ board_init16:
movl $0x000000cb, %eax
outl %eax, %dx
- /* the return address is stored in bp */
- jmp *%bp
+ jmp board_init16_ret
.section .bios, "ax"
.code16
diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds
index 7b0ffaa..b414079 100644
--- a/board/eNET/u-boot.lds
+++ b/board/eNET/u-boot.lds
@@ -27,66 +27,62 @@ ENTRY(_start)
SECTIONS
{
- . = 0x06000000; /* Location of bootcode in flash */
- _i386boot_text_start = .;
- .text : { *(.text); }
+ . = TEXT_BASE; /* Location of bootcode in flash */
+ __text_start = .;
+ .text : { *(.text*); }
. = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- _i386boot_text_size = SIZEOF(.text) + SIZEOF(.rodata);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
. = ALIGN(4);
+ __u_boot_cmd_end = .;
- .data : { *(.data) }
. = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
- .interp : { *(.interp) }
. = ALIGN(4);
+ .data : { *(.data*) }
- .dynsym : { *(.dynsym) }
. = ALIGN(4);
+ .dynsym : { *(.dynsym*) }
- .dynstr : { *(.dynstr) }
. = ALIGN(4);
+ .hash : { *(.hash*) }
- .hash : { *(.hash) }
. = ALIGN(4);
+ .got : { *(.got*) }
- .got : { *(.got) }
. = ALIGN(4);
+ __data_end = .;
- .got.plt : { *(.got.plt) }
. = ALIGN(4);
-
- .dynamic (NOLOAD) : { *(.dynamic) }
+ __bss_start = ABSOLUTE(.);
+ .bss (NOLOAD) : { *(.bss) }
. = ALIGN(4);
+ __bss_end = ABSOLUTE(.);
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
. = ALIGN(4);
- __u_boot_cmd_end = .;
- _i386boot_cmd_start = LOADADDR(.u_boot_cmd);
-
- _i386boot_rel_dyn_start = .;
+ __rel_dyn_start = .;
.rel.dyn : { *(.rel.dyn) }
- _i386boot_rel_dyn_end = .;
+ __rel_dyn_end = .;
- . = ALIGN(4);
- _i386boot_bss_start = ABSOLUTE(.);
- .bss (NOLOAD) : { *(.bss) }
- _i386boot_bss_size = SIZEOF(.bss);
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
/* 16bit realmode trampoline code */
- .realmode 0x7c0 : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { *(.realmode) }
+ .realmode 0x7c0 : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { KEEP(*(.realmode)) }
- _i386boot_realmode = LOADADDR(.realmode);
- _i386boot_realmode_size = SIZEOF(.realmode);
+ __realmode_start = LOADADDR(.realmode);
+ __realmode_size = SIZEOF(.realmode);
/* 16bit BIOS emulation code (just enough to boot Linux) */
- .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { *(.bios) }
+ .bios 0 : AT ( LOADADDR(.realmode) + SIZEOF(.realmode) ) { KEEP(*(.bios)) }
- _i386boot_bios = LOADADDR(.bios);
- _i386boot_bios_size = SIZEOF(.bios);
+ __bios_start = LOADADDR(.bios);
+ __bios_size = SIZEOF(.bios);
/* The load addresses below assumes that the flash
* will be mapped so that 0x387f0000 == 0xffff0000
@@ -98,12 +94,11 @@ SECTIONS
* The fff0 offset of resetvec is important, however.
*/
. = 0xfffffe00;
- .start32 : AT (0x0603fe00) { *(.start32); }
+ .start32 : AT (TEXT_BASE + 0x3fe00) { KEEP(*(.start32)); }
. = 0xf800;
- .start16 : AT (0x0603f800) { *(.start16); }
+ .start16 : AT (TEXT_BASE + 0x3f800) { KEEP(*(.start16)); }
. = 0xfff0;
- .resetvec : AT (0x0603fff0) { *(.resetvec); }
- _i386boot_end = (LOADADDR(.resetvec) + SIZEOF(.resetvec) );
+ .resetvec : AT (TEXT_BASE + 0x3fff0) { KEEP(*(.resetvec)); }
}
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 6b611b1..1326c8f 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -385,7 +385,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
bd_t *bd = gd->bd;
char buf[32];
- print_num ("env_t", (ulong)bd->bi_env);
print_num ("boot_params", (ulong)bd->bi_boot_params);
print_num ("bi_memstart", bd->bi_memstart);
print_num ("bi_memsize", bd->bi_memsize);
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index da2a97d..fc7c1c6 100644
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -29,8 +29,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_RELOC_FIXUP_WORKS
-
/*
* Stuff still to be dealt with -
*/