diff options
author | Stefan Roese <sr@denx.de> | 2008-11-12 13:30:10 +0100 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-12-10 00:28:47 +0100 |
commit | c034075a713b60e654c64e88e87da29440f31bb4 (patch) | |
tree | 8d14c43aeef4920f1caf0618e9e9be91f5058ac3 | |
parent | 142a80ffc3b537a9c45acd2444a42a77f147c602 (diff) | |
download | bootable_bootloader_goldelico_gta04-c034075a713b60e654c64e88e87da29440f31bb4.zip bootable_bootloader_goldelico_gta04-c034075a713b60e654c64e88e87da29440f31bb4.tar.gz bootable_bootloader_goldelico_gta04-c034075a713b60e654c64e88e87da29440f31bb4.tar.bz2 |
serial: Add vcth UART driver
This patch adds the UART driver for the upcoming VCTH board support.
Signed-off-by: Stefan Roese <sr@denx.de>
-rw-r--r-- | drivers/serial/Makefile | 1 | ||||
-rwxr-xr-x | drivers/serial/vcth.c | 121 |
2 files changed, 122 insertions, 0 deletions
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index eafe543..17235ff 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -38,6 +38,7 @@ COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o COBJS-$(CONFIG_USB_TTY) += usbtty.o +COBJS-$(CONFIG_VCTH_SERIAL) += vcth.o COBJS := $(sort $(COBJS-y)) SRCS := $(COBJS:.o=.c) diff --git a/drivers/serial/vcth.c b/drivers/serial/vcth.c new file mode 100755 index 0000000..2c847d0 --- /dev/null +++ b/drivers/serial/vcth.c @@ -0,0 +1,121 @@ +/* + * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> + +#define UART_1_BASE 0xBF89C000 + +#define UART_RBR_OFF 0x00 /* receiver buffer reg */ +#define UART_THR_OFF 0x00 /* transmit holding reg */ +#define UART_DLL_OFF 0x00 /* divisor latch low reg */ +#define UART_IER_OFF 0x04 /* interrupt enable reg */ +#define UART_DLH_OFF 0x04 /* receiver buffer reg */ +#define UART_FCR_OFF 0x08 /* fifo control register */ +#define UART_LCR_OFF 0x0c /* line control register */ +#define UART_MCR_OFF 0x10 /* modem control register */ +#define UART_LSR_OFF 0x14 /* line status register */ +#define UART_MSR_OFF 0x18 /* modem status register */ +#define UART_SCR_OFF 0x1c /* scratch pad register */ + +#define UART_RCV_DATA_RDY 0x01 /* Data Received */ +#define UART_XMT_HOLD_EMPTY 0x20 +#define UART_TRANSMIT_EMPTY 0x40 + +/* 7 bit on line control reg. enalbing rw to dll and dlh */ +#define UART_LCR_DLAB 0x0080 + +#define UART___9600_BDR 0x84 +#define UART__19200_BDR 0x42 +#define UART_115200_BDR 0x08 + +#define UART_DIS_ALL_INTER 0x00 /* disable all interrupts */ + +#define UART_5DATA_BITS 0x0000 /* 5 [bits] 1.5 bits 2 */ +#define UART_6DATA_BITS 0x0001 /* 6 [bits] 1 bits 2 */ +#define UART_7DATA_BITS 0x0002 /* 7 [bits] 1 bits 2 */ +#define UART_8DATA_BITS 0x0003 /* 8 [bits] 1 bits 2 */ + +static void vcth_uart_set_baud_rate(u32 address, u32 dh, u32 dl) +{ + u32 val = __raw_readl(UART_1_BASE + UART_LCR_OFF); + + /* set 7 bit on 1 */ + val |= UART_LCR_DLAB; + __raw_writel(val, UART_1_BASE + UART_LCR_OFF); + + __raw_writel(dl, UART_1_BASE + UART_DLL_OFF); + __raw_writel(dh, UART_1_BASE + UART_DLH_OFF); + + /* set 7 bit on 0 */ + val &= ~UART_LCR_DLAB; + __raw_writel(val, UART_1_BASE + UART_LCR_OFF); + + return; +} + +int serial_init(void) +{ + __raw_writel(UART_DIS_ALL_INTER, UART_1_BASE + UART_IER_OFF); + vcth_uart_set_baud_rate(UART_1_BASE, 0, UART_115200_BDR); + __raw_writel(UART_8DATA_BITS, UART_1_BASE + UART_LCR_OFF); + + return 0; +} + +void serial_setbrg(void) +{ + /* + * Baudrate change not supported currently, fixed to 115200 baud + */ +} + +void serial_putc(const char c) +{ + if (c == '\n') + serial_putc('\r'); + + while (!(UART_XMT_HOLD_EMPTY & __raw_readl(UART_1_BASE + UART_LSR_OFF))) + ; + + __raw_writel(c, UART_1_BASE + UART_THR_OFF); +} + +void serial_puts(const char *s) +{ + while (*s) + serial_putc(*s++); +} + +int serial_getc(void) +{ + while (!(UART_RCV_DATA_RDY & __raw_readl(UART_1_BASE + UART_LSR_OFF))) + ; + + return __raw_readl(UART_1_BASE + UART_RBR_OFF) & 0xff; +} + +int serial_tstc(void) +{ + if (!(UART_RCV_DATA_RDY & __raw_readl(UART_1_BASE + UART_LSR_OFF))) + return 0; + + return 1; +} |