ppc4xx: Big lwmon5 board support rework/update

This patch brings the lwmon5 board support up-to-date. Here a
summary of the changes:

lwmon5 board port related:
- GPIO's changed to control the LSB transmitter
- Reset USB PHY's upon power-up
- Enable CAN upon power-up
- USB init error workaround (errata CHIP_6)
- EBC: Enable burstmode and modify the timings for the GDC memory
- EBC: Speed up NOR flash timings

lwmon5 board POST related:
- Add FPGA memory test
- Add GDC memory test
- DSP POST reworked
- SYSMON POST: Fix handling of negative temperatures
- Add output for sysmon1 POST
- HW-watchdog min. time test reworked

Additionally some coding-style changes were done.

Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
Signed-off-by: Stefan Roese <sr@denx.de>

9 files changed, 1090 insertions, 359 deletions

diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c
index 0e26b89..5231c7a 100644
--- a/board/lwmon5/kbd.c
+++ b/board/lwmon5/kbd.c
@@ -45,6 +45,10 @@ static int compare_magic (uchar *kbd_data, uchar *str);
 /*--------------------- Local macros and constants --------------------*/
 #define	_NOT_USED_	0xFFFFFFFF
 
+/*------------------------- dspic io expander -----------------------*/
+#define DSPIC_PON_STATUS_REG	0x80A
+#define DSPIC_PON_INV_STATUS_REG 0x80C
+#define DSPIC_PON_KEY_REG	0x810
 /*------------------------- Keyboard controller -----------------------*/
 /* command codes */
 #define	KEYBD_CMD_READ_KEYS	0x01
@@ -75,6 +79,7 @@ static int compare_magic (uchar *kbd_data, uchar *str);
 /* maximum number of "magic" key codes that can be assigned */
 
 static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
+static uchar dspic_addr = CONFIG_SYS_I2C_DSPIC_IO_ADDR;
 
 static uchar *key_match (uchar *);
 
@@ -167,6 +172,23 @@ static void kbd_init (void)
 	}
 }
 
+
+/* Read a register from the dsPIC. */
+int _dspic_read(ushort reg, ushort *data)
+{
+	uchar buf[sizeof(*data)];
+	int rval;
+
+	if (i2c_read(dspic_addr, reg, 2, buf, 2))
+		return -1;
+
+	rval = i2c_read(dspic_addr, reg, sizeof(reg), buf, sizeof(*data));
+	*data = (buf[0] << 8) | buf[1];
+
+	return rval;
+}
+
+
 /***********************************************************************
 F* Function:     int misc_init_r (void) P*A*Z*
  *
@@ -197,6 +219,7 @@ int misc_init_r_kbd (void)
 	uchar kbd_init_status = gd->kbd_status >> 8;
 	uchar kbd_status = gd->kbd_status;
 	uchar val;
+	ushort data, inv_data;
 	char *str;
 	int i;
 
@@ -231,9 +254,31 @@ int misc_init_r_kbd (void)
 	i2c_write (kbd_addr, 0, 0, &val, 1);
 	i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
 
+	/* read out start key from bse01 received via can */
+	_dspic_read(DSPIC_PON_STATUS_REG, &data);
+	/* check highbyte from status register */
+	if (data > 0xFF) {
+		_dspic_read(DSPIC_PON_INV_STATUS_REG, &inv_data);
+
+		/* check inverse data */
+		if ((data+inv_data) == 0xFFFF) {
+			/* don't overwrite local key */
+			if (kbd_data[1] == 0) {
+				/* read key value */
+				_dspic_read(DSPIC_PON_KEY_REG, &data);
+				str = (char *)&data;
+				/* swap bytes */
+				kbd_data[1] = str[1];
+				kbd_data[2] = str[0];
+				printf("CAN received startkey: 0x%X\n", data);
+			}
+		}
+	}
+
 	for (i = 0; i < KEYBD_DATALEN; ++i) {
 		sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
 	}
+
 	setenv ("keybd", keybd_env);
 
 	str = strdup ((char *)key_match (kbd_data));	/* decode keys */
diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c
index 9622b70..dd275bf 100644
--- a/board/lwmon5/lwmon5.c
+++ b/board/lwmon5/lwmon5.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2010
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
@@ -24,10 +24,13 @@
 #include <asm/processor.h>
 #include <asm/ppc4xx-gpio.h>
 #include <asm/io.h>
+#include <post.h>
+#include <flash.h>
+#include <mtd/cfi_flash.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST;
 
 ulong flash_get_size(ulong base, int banknum);
 int misc_init_r_kbd(void);
@@ -97,16 +100,18 @@ int board_early_init_f(void)
 	gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
 
 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
-	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 1);
+	/* enable the LSB transmitter */
+	gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
+	/* enable the CAN transmitter */
+	gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1);
 
 	reg = 0; /* reuse as counter */
 	out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
 		in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
 			& ~CONFIG_SYS_DSPIC_TEST_MASK);
-	while (!gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
+	while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
 		udelay(1000);
 	}
-	gpio_write_bit(CONFIG_SYS_GPIO_HIGHSIDE, 0);
 	if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
 		/* set "boot error" flag */
 		out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
@@ -135,9 +140,61 @@ int board_early_init_f(void)
 	return 0;
 }
 
-/*---------------------------------------------------------------------------+
-  | misc_init_r.
-  +---------------------------------------------------------------------------*/
+/*
+ * Override weak default with board specific version
+ */
+phys_addr_t cfi_flash_bank_addr(int bank)
+{
+	return lwmon5_cfi_flash_bank_addr[bank];
+}
+
+/*
+ * Override the weak default mapping function with a board specific one
+ */
+u32 flash_get_bank_size(int cs, int idx)
+{
+	return flash_info[idx].size;
+}
+
+int board_early_init_r(void)
+{
+	u32 val0, val1;
+
+	/*
+	 * lwmon5 is manufactured in 2 different board versions:
+	 * The lwmon5a board has 64MiB NOR flash instead of the
+	 * 128MiB of the original lwmon5. Unfortunately the CFI driver
+	 * will report 2 banks of 64MiB even for the smaller flash
+	 * chip, since the bank is mirrored. To fix this, we bring
+	 * one bank into CFI query mode and read its response. This
+	 * enables us to detect the real number of flash devices/
+	 * banks which will be used later on by the common CFI driver.
+	 */
+
+	/* Put bank 0 into CFI command mode and read */
+	out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098);
+	val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP);
+	val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP);
+
+	/* Reset flash again out of query mode */
+	out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0);
+
+	/* When not identical, we have 2 different flash devices/banks */
+	if (val0 != val1)
+		return 0;
+
+	/*
+	 * Now we're sure that we're running on a LWMON5a board with
+	 * only 64MiB NOR flash in one bank:
+	 *
+	 * Set flash base address and bank count for CFI driver probing.
+	 */
+	cfi_flash_num_flash_banks = 1;
+	lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0;
+
+	return 0;
+}
+
 int misc_init_r(void)
 {
 	u32 pbcr;
@@ -145,7 +202,7 @@ int misc_init_r(void)
 	u32 reg;
 	unsigned long usb2d0cr = 0;
 	unsigned long usb2phy0cr, usb2h0cr = 0;
-	unsigned long sdr0_pfc1;
+	unsigned long sdr0_pfc1, sdr0_srst;
 
 	/*
 	 * FLASH stuff...
@@ -158,32 +215,7 @@ int misc_init_r(void)
 	gd->bd->bi_flashoffset = 0;
 
 	mfebc(PB0CR, pbcr);
-	switch (gd->bd->bi_flashsize) {
-	case 1 << 20:
-		size_val = 0;
-		break;
-	case 2 << 20:
-		size_val = 1;
-		break;
-	case 4 << 20:
-		size_val = 2;
-		break;
-	case 8 << 20:
-		size_val = 3;
-		break;
-	case 16 << 20:
-		size_val = 4;
-		break;
-	case 32 << 20:
-		size_val = 5;
-		break;
-	case 64 << 20:
-		size_val = 6;
-		break;
-	case 128 << 20:
-		size_val = 7;
-		break;
-	}
+	size_val = ffs(gd->bd->bi_flashsize) - 21;
 	pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 	mtebc(PB0CR, pbcr);
 
@@ -193,53 +225,92 @@ int misc_init_r(void)
 	flash_get_size(gd->bd->bi_flashstart, 0);
 
 	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CONFIG_SYS_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[1]);
+	flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff,
+		      &flash_info[cfi_flash_num_flash_banks - 1]);
 
 	/* Env protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    CONFIG_ENV_ADDR_REDUND,
-			    CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
-			    &flash_info[1]);
+	flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
+		      CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
+		      &flash_info[cfi_flash_num_flash_banks - 1]);
 
 	/*
 	 * USB suff...
 	 */
+
+	/* Reset USB */
+	/* Reset of USB2PHY0 must be active at least 10 us  */
+	mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D);
+	udelay(2000);
+
+	mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI |
+	      SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 |
+	      SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40);
+	udelay(2000);
+
+	/* Errata CHIP_6 */
+
+	/* 1. Set internal PHY configuration */
 	/* SDR Setting */
 	mfsdr(SDR0_PFC1, sdr0_pfc1);
 	mfsdr(SDR0_USB0, usb2d0cr);
 	mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 	mfsdr(SDR0_USB2H0CR, usb2h0cr);
 
-	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
-	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
-	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
-	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
-	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
-	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;		/*0*/
-	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
-	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
-	usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
-	usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
-
-	/* An 8-bit/60MHz interface is the only possible alternative
-	   when connecting the Device to the PHY */
-	usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
-	usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
+	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
+	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_XOCLK_EXTERNAL;	/*0*/
+	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
+	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;	/*1*/
+	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
+	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_DVBUS_PUREN;		/*1*/
+	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
+	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_DWNSTR_HOST;		/*1*/
+	usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
+	usb2phy0cr = usb2phy0cr |  SDR0_USB2PHY0CR_UTMICN_HOST;		/*1*/
+
+	/*
+	 * An 8-bit/60MHz interface is the only possible alternative
+	 * when connecting the Device to the PHY
+	 */
+	usb2h0cr   = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
+	usb2h0cr   = usb2h0cr |  SDR0_USB2H0CR_WDINT_16BIT_30MHZ;	/*1*/
 
 	mtsdr(SDR0_PFC1, sdr0_pfc1);
 	mtsdr(SDR0_USB0, usb2d0cr);
 	mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 	mtsdr(SDR0_USB2H0CR, usb2h0cr);
 
+	/* 2. De-assert internal PHY reset */
+	mfsdr(SDR0_SRST1, sdr0_srst);
+	sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY;
+	mtsdr(SDR0_SRST1, sdr0_srst);
+
+	/* 3. Wait for more than 1 ms */
+	udelay(2000);
+
+	/* 4. De-assert USB 2.0 Host main reset */
+	mfsdr(SDR0_SRST0, sdr0_srst);
+	sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H;
+	mtsdr(SDR0_SRST0, sdr0_srst);
+	udelay(1000);
+
+	/* 5. De-assert reset of OPB2 cores */
+	mfsdr(SDR0_SRST1, sdr0_srst);
+	sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1;
+	sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40;
+	sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2;
+	mtsdr(SDR0_SRST1, sdr0_srst);
+	udelay(1000);
+
+	/* 6. Set EHCI Configure FLAG */
+
+	/* 7. Reassert internal PHY reset: */
+	mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
+	udelay(1000);
+
 	/*
 	 * Clear resets
 	 */
-	udelay (1000);
 	mtsdr(SDR0_SRST1, 0x00000000);
-	udelay (1000);
 	mtsdr(SDR0_SRST0, 0x00000000);
 
 	printf("USB:   Host(int phy) Device(ext phy)\n");
@@ -264,7 +335,7 @@ int checkboard(void)
 {
 	char *s = getenv("serial#");
 
-	printf("Board: lwmon5");
+	puts("Board: lwmon5");
 
 	if (s != NULL) {
 		puts(", serial# ");
@@ -331,34 +402,33 @@ U_BOOT_CMD(
 
 extern GraphicDevice mb862xx;
 
-static const gdc_regs init_regs [] =
-{
-	{0x0100, 0x00000f00},
-	{0x0020, 0x801401df},
-	{0x0024, 0x00000000},
-	{0x0028, 0x00000000},
-	{0x002c, 0x00000000},
-	{0x0110, 0x00000000},
-	{0x0114, 0x00000000},
-	{0x0118, 0x01df0280},
-	{0x0004, 0x031f0000},
-	{0x0008, 0x027f027f},
-	{0x000c, 0x015f028f},
-	{0x0010, 0x020c0000},
-	{0x0014, 0x01df01ea},
-	{0x0018, 0x00000000},
-	{0x001c, 0x01e00280},
-	{0x0100, 0x80010f00},
-	{0x0, 0x0}
+static const gdc_regs init_regs [] = {
+	{ 0x0100, 0x00000f00 },
+	{ 0x0020, 0x801401df },
+	{ 0x0024, 0x00000000 },
+	{ 0x0028, 0x00000000 },
+	{ 0x002c, 0x00000000 },
+	{ 0x0110, 0x00000000 },
+	{ 0x0114, 0x00000000 },
+	{ 0x0118, 0x01df0280 },
+	{ 0x0004, 0x031f0000 },
+	{ 0x0008, 0x027f027f },
+	{ 0x000c, 0x015f028f },
+	{ 0x0010, 0x020c0000 },
+	{ 0x0014, 0x01df01ea },
+	{ 0x0018, 0x00000000 },
+	{ 0x001c, 0x01e00280 },
+	{ 0x0100, 0x80010f00 },
+	{ 0x0, 0x0 }
 };
 
-const gdc_regs *board_get_regs (void)
+const gdc_regs *board_get_regs(void)
 {
 	return init_regs;
 }
 
 /* Returns Lime base address */
-unsigned int board_video_init (void)
+unsigned int board_video_init(void)
 {
 	/*
 	 * Reset Lime controller
@@ -375,7 +445,7 @@ unsigned int board_video_init (void)
 	return CONFIG_SYS_LIME_BASE_0;
 }
 
-#define DEFAULT_BRIGHTNESS 0x64
+#define DEFAULT_BRIGHTNESS	0x64
 
 static void board_backlight_brightness(int brightness)
 {
@@ -390,7 +460,7 @@ static void board_backlight_brightness(int brightness)
 	}
 }
 
-void board_backlight_switch (int flag)
+void board_backlight_switch(int flag)
 {
 	char * param;
 	int rc;
@@ -410,15 +480,14 @@ void board_backlight_switch (int flag)
 /*
  * Return text to be printed besides the logo.
  */
-void video_get_info_str (int line_number, char *info)
+void video_get_info_str(int line_number, char *info)
 {
-	if (line_number == 1) {
-		strcpy (info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
-	} else {
+	if (line_number == 1)
+		strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
+	else
 		info [0] = '\0';
-	}
 }
-#endif
+#endif /* CONFIG_CONSOLE_EXTRA_INFO */
 #endif /* CONFIG_VIDEO */
 
 void board_reset(void)
diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 72e02f8..2349583 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007-2008
+ * (C) Copyright 2007-2010
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * This program is free software; you can redistribute it and/or
@@ -18,58 +18,63 @@
  * MA 02111-1307 USA
  */
 
-/************************************************************************
+/*
  * lwmon5.h - configuration for lwmon5 board
- ***********************************************************************/
+ */
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/*-----------------------------------------------------------------------
+/*
+ * Liebherr extra version info
+ */
+#define CONFIG_IDENT_STRING	" - v2.0"
+
+/*
  * High Level Configuration Options
- *----------------------------------------------------------------------*/
+ */
 #define CONFIG_LWMON5		1		/* Board is lwmon5	*/
 #define CONFIG_440EPX		1		/* Specific PPC440EPx	*/
 #define CONFIG_440		1		/* ... PPC440 family	*/
 #define CONFIG_4xx		1		/* ... PPC4xx family	*/
 #define CONFIG_SYS_CLK_FREQ	33300000	/* external freq to pll	*/
 
-#define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
-#define CONFIG_BOARD_POSTCLK_INIT 1	/* Call board_postclk_init	*/
-#define CONFIG_MISC_INIT_R	1	/* Call misc_init_r		*/
-#define CONFIG_BOARD_RESET	1	/* Call board_reset		*/
+#define CONFIG_BOARD_EARLY_INIT_F	/* Call board_early_init_f	*/
+#define CONFIG_BOARD_EARLY_INIT_R	/* Call board_early_init_r	*/
+#define CONFIG_BOARD_POSTCLK_INIT	/* Call board_postclk_init	*/
+#define CONFIG_MISC_INIT_R		/* Call misc_init_r		*/
+#define CONFIG_BOARD_RESET		/* Call board_reset		*/
 
-/*-----------------------------------------------------------------------
+/*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)	/* Reserve 512 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserve 512 kB for malloc()	*/
+ */
+#define CONFIG_SYS_MONITOR_BASE		TEXT_BASE	/* Start of U-Boot	*/
+#define CONFIG_SYS_MONITOR_LEN		(0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
+#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* Reserved for malloc	*/
 
 #define CONFIG_SYS_BOOT_BASE_ADDR	0xf0000000
 #define CONFIG_SYS_SDRAM_BASE		0x00000000	/* _must_ be 0		*/
 #define CONFIG_SYS_FLASH_BASE		0xf8000000	/* start of FLASH	*/
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
-#define CONFIG_SYS_LIME_BASE_0         0xc0000000
-#define CONFIG_SYS_LIME_BASE_1         0xc1000000
-#define CONFIG_SYS_LIME_BASE_2         0xc2000000
-#define CONFIG_SYS_LIME_BASE_3         0xc3000000
-#define CONFIG_SYS_FPGA_BASE_0         0xc4000000
-#define CONFIG_SYS_FPGA_BASE_1         0xc4200000
+#define CONFIG_SYS_LIME_BASE_0		0xc0000000
+#define CONFIG_SYS_LIME_BASE_1		0xc1000000
+#define CONFIG_SYS_LIME_BASE_2		0xc2000000
+#define CONFIG_SYS_LIME_BASE_3		0xc3000000
+#define CONFIG_SYS_FPGA_BASE_0		0xc4000000
+#define CONFIG_SYS_FPGA_BASE_1		0xc4200000
 #define CONFIG_SYS_OCM_BASE		0xe0010000      /* ocm			*/
 #define CONFIG_SYS_PCI_BASE		0xe0000000      /* Internal PCI regs	*/
 #define CONFIG_SYS_PCI_MEMBASE		0x80000000	/* mapped pci memory	*/
-#define CONFIG_SYS_PCI_MEMBASE1	CONFIG_SYS_PCI_MEMBASE  + 0x10000000
-#define CONFIG_SYS_PCI_MEMBASE2	CONFIG_SYS_PCI_MEMBASE1 + 0x10000000
-#define CONFIG_SYS_PCI_MEMBASE3	CONFIG_SYS_PCI_MEMBASE2 + 0x10000000
+#define CONFIG_SYS_PCI_MEMBASE1		(CONFIG_SYS_PCI_MEMBASE  + 0x10000000)
+#define CONFIG_SYS_PCI_MEMBASE2		(CONFIG_SYS_PCI_MEMBASE1 + 0x10000000)
+#define CONFIG_SYS_PCI_MEMBASE3		(CONFIG_SYS_PCI_MEMBASE2 + 0x10000000)
 
 #define CONFIG_SYS_USB2D0_BASE		0xe0000100
 #define CONFIG_SYS_USB_DEVICE		0xe0000000
 #define CONFIG_SYS_USB_HOST		0xe0000400
 
-/*-----------------------------------------------------------------------
- * Initial RAM & stack pointer
- *----------------------------------------------------------------------*/
 /*
+ * Initial RAM & stack pointer
+ *
  * On LWMON5 we use D-cache as init-ram and stack pointer. We also move
  * the POST_WORD from OCM to a 440EPx register that preserves it's
  * content during reset (GPT0_COMP6). This way we reserve the OCM (16k)
@@ -77,18 +82,18 @@
  */
 #define CONFIG_SYS_INIT_RAM_DCACHE	1		/* d-cache as init ram	*/
 #define CONFIG_SYS_INIT_RAM_ADDR	0x70000000		/* DCache       */
-#define CONFIG_SYS_INIT_RAM_END	(4 << 10)
+#define CONFIG_SYS_INIT_RAM_END		(4 << 10)
 #define CONFIG_SYS_GBL_DATA_SIZE	256		/* num bytes initial data*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
+					 CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+/* unused GPT0 COMP reg	*/
 #define CONFIG_SYS_POST_WORD_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
-						/* unused GPT0 COMP reg	*/
-#define CONFIG_SYS_MEM_TOP_HIDE	(4 << 10) /* don't use last 4kbytes	*/
-					/* 440EPx errata CHIP 11	*/
 #define CONFIG_SYS_OCM_SIZE		(16 << 10)
+/* 440EPx errata CHIP 11: don't use last 4kbytes */
+#define CONFIG_SYS_MEM_TOP_HIDE		(4 << 10)
 
 /* Additional registers for watchdog timer post test */
-
 #define CONFIG_SYS_WATCHDOG_TIME_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK2)
 #define CONFIG_SYS_WATCHDOG_FLAGS_ADDR	(CONFIG_SYS_PERIPHERAL_BASE + GPT0_MASK1)
 #define CONFIG_SYS_DSPIC_TEST_ADDR	CONFIG_SYS_WATCHDOG_FLAGS_ADDR
@@ -100,9 +105,9 @@
 #define CONFIG_SYS_OCM_STATUS_FAIL	0x0000A300
 #define CONFIG_SYS_OCM_STATUS_MASK	0x0000FF00
 
-/*-----------------------------------------------------------------------
+/*
  * Serial Port
- *----------------------------------------------------------------------*/
+ */
 #define CONFIG_CONS_INDEX	2	/* Use UART1			*/
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
@@ -110,77 +115,79 @@
 #define CONFIG_SYS_NS16550_CLK		get_serial_clock()
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK		/* no external clock provided	*/
 #define CONFIG_BAUDRATE		115200
-#define CONFIG_SERIAL_MULTI     1
+#define CONFIG_SERIAL_MULTI
 
 #define CONFIG_SYS_BAUDRATE_TABLE						\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
-/*-----------------------------------------------------------------------
+/*
  * Environment
- *----------------------------------------------------------------------*/
-#define CONFIG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+ */
+#define CONFIG_ENV_IS_IN_FLASH		/* use FLASH for environment vars	*/
 
-/*-----------------------------------------------------------------------
+/*
  * FLASH related
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_FLASH_CFI				/* The flash is CFI compatible	*/
+ */
+#define CONFIG_SYS_FLASH_CFI			/* The flash is CFI compatible	*/
 #define CONFIG_FLASH_CFI_DRIVER			/* Use common CFI driver	*/
 
 #define CONFIG_SYS_FLASH0		0xFC000000
 #define CONFIG_SYS_FLASH1		0xF8000000
 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH1, CONFIG_SYS_FLASH0 }
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 2	/* max number of memory banks		*/
 #define CONFIG_SYS_MAX_FLASH_SECT	512	/* max number of sectors on one chip	*/
 
 #define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buffered writes (20x faster)	*/
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protection	*/
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 	/* use buffered writes (20x faster)	*/
+#define CONFIG_SYS_FLASH_PROTECTION		/* use hardware flash protection	*/
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_QUIET_TEST	1	/* don't warn upon unknown flash	*/
+#define CONFIG_SYS_FLASH_QUIET_TEST		/* don't warn upon unknown flash	*/
 
 #define CONFIG_ENV_SECT_SIZE	0x40000	/* size of one complete sector		*/
-#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		((-CONFIG_SYS_MONITOR_LEN) - CONFIG_ENV_SECT_SIZE)
 #define	CONFIG_ENV_SIZE		0x2000	/* Total Size of Environment Sector	*/
 
 /* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
 
-/*-----------------------------------------------------------------------
+/*
  * DDR SDRAM
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MBYTES_SDRAM	(256)		/* 256MB			*/
+ */
+#define CONFIG_SYS_MBYTES_SDRAM		256
 #define CONFIG_SYS_DDR_CACHED_ADDR	0x40000000	/* setup 2nd TLB cached here	*/
-#define CONFIG_DDR_DATA_EYE	1		/* use DDR2 optimization	*/
-#define CONFIG_DDR_ECC		1		/* enable ECC			*/
-#define CONFIG_SYS_POST_ECC_ON		CONFIG_SYS_POST_ECC
+#define CONFIG_DDR_DATA_EYE			/* use DDR2 optimization	*/
+#define CONFIG_DDR_ECC				/* enable ECC			*/
 
 /* POST support */
-#define CONFIG_POST		(CONFIG_SYS_POST_CACHE    | \
-				 CONFIG_SYS_POST_CPU	   | \
-				 CONFIG_SYS_POST_ECC_ON   | \
-				 CONFIG_SYS_POST_ETHER	   | \
-				 CONFIG_SYS_POST_FPU	   | \
-				 CONFIG_SYS_POST_I2C	   | \
-				 CONFIG_SYS_POST_MEMORY   | \
-				 CONFIG_SYS_POST_OCM      | \
-				 CONFIG_SYS_POST_RTC      | \
-				 CONFIG_SYS_POST_SPR      | \
-				 CONFIG_SYS_POST_UART     | \
-				 CONFIG_SYS_POST_SYSMON   | \
-				 CONFIG_SYS_POST_WATCHDOG | \
-				 CONFIG_SYS_POST_DSP      | \
-				 CONFIG_SYS_POST_BSPEC1   | \
-				 CONFIG_SYS_POST_BSPEC2   | \
-				 CONFIG_SYS_POST_BSPEC3   | \
-				 CONFIG_SYS_POST_BSPEC4   | \
+#define CONFIG_POST		(CONFIG_SYS_POST_CACHE		| \
+				 CONFIG_SYS_POST_CPU		| \
+				 CONFIG_SYS_POST_ECC		| \
+				 CONFIG_SYS_POST_ETHER		| \
+				 CONFIG_SYS_POST_FPU		| \
+				 CONFIG_SYS_POST_I2C		| \
+				 CONFIG_SYS_POST_MEMORY		| \
+				 CONFIG_SYS_POST_OCM		| \
+				 CONFIG_SYS_POST_RTC		| \
+				 CONFIG_SYS_POST_SPR		| \
+				 CONFIG_SYS_POST_UART		| \
+				 CONFIG_SYS_POST_SYSMON		| \
+				 CONFIG_SYS_POST_WATCHDOG	| \
+				 CONFIG_SYS_POST_DSP		| \
+				 CONFIG_SYS_POST_BSPEC1		| \
+				 CONFIG_SYS_POST_BSPEC2		| \
+				 CONFIG_SYS_POST_BSPEC3		| \
+				 CONFIG_SYS_POST_BSPEC4		| \
 				 CONFIG_SYS_POST_BSPEC5)
 
-#define CONFIG_POST_WATCHDOG  {\
+/* Define here the base-addresses of the UARTs to test in POST */
+#define CONFIG_SYS_POST_UART_TABLE	{ UART0_BASE, UART1_BASE }
+
+#define CONFIG_POST_WATCHDOG  {				\
 	"Watchdog timer test",				\
 	"watchdog",					\
 	"This test checks the watchdog timer.",		\
@@ -188,10 +195,10 @@
 	&lwmon5_watchdog_post_test,			\
 	NULL,						\
 	NULL,						\
-	CONFIG_SYS_POST_WATCHDOG				\
+	CONFIG_SYS_POST_WATCHDOG			\
 	}
 
-#define CONFIG_POST_BSPEC1    {\
+#define CONFIG_POST_BSPEC1    {				\
 	"dsPIC init test",				\
 	"dspic_init",					\
 	"This test returns result of dsPIC READY test run earlier.",	\
@@ -199,10 +206,10 @@
 	&dspic_init_post_test,				\
 	NULL,						\
 	NULL,						\
-	CONFIG_SYS_POST_BSPEC1					\
+	CONFIG_SYS_POST_BSPEC1				\
 	}
 
-#define CONFIG_POST_BSPEC2    {\
+#define CONFIG_POST_BSPEC2    {				\
 	"dsPIC test",					\
 	"dspic",					\
 	"This test gets result of dsPIC POST and dsPIC version.",	\
@@ -210,32 +217,32 @@
 	&dspic_post_test,				\
 	NULL,						\
 	NULL,						\
-	CONFIG_SYS_POST_BSPEC2					\
+	CONFIG_SYS_POST_BSPEC2				\
 	}
 
-#define CONFIG_POST_BSPEC3    {\
+#define CONFIG_POST_BSPEC3    {				\
 	"FPGA test",					\
 	"fpga",						\
 	"This test checks FPGA registers and memory.",	\
-	POST_RAM | POST_ALWAYS,				\
+	POST_RAM | POST_ALWAYS | POST_MANUAL,		\
 	&fpga_post_test,				\
 	NULL,						\
 	NULL,						\
-	CONFIG_SYS_POST_BSPEC3					\
+	CONFIG_SYS_POST_BSPEC3				\
 	}
 
-#define CONFIG_POST_BSPEC4    {\
+#define CONFIG_POST_BSPEC4    {				\
 	"GDC test",					\
 	"gdc",						\
 	"This test checks GDC registers and memory.",	\
-	POST_RAM | POST_ALWAYS,				\
+	POST_RAM | POST_ALWAYS | POST_MANUAL,\
 	&gdc_post_test,					\
 	NULL,						\
 	NULL,						\
-	CONFIG_SYS_POST_BSPEC4					\
+	CONFIG_SYS_POST_BSPEC4				\
 	}
 
-#define CONFIG_POST_BSPEC5    {\
+#define CONFIG_POST_BSPEC5    {				\
 	"SYSMON1 test",					\
 	"sysmon1",					\
 	"This test checks GPIO_62_EPX pin indicating power failure.",	\
@@ -243,7 +250,7 @@
 	&sysmon1_post_test,				\
 	NULL,						\
 	NULL,						\
-	CONFIG_SYS_POST_BSPEC5					\
+	CONFIG_SYS_POST_BSPEC5				\
 	}
 
 #define CONFIG_SYS_POST_CACHE_ADDR	0x7fff0000 /* free virtual address	*/
@@ -253,34 +260,53 @@
 #define CONFIG_ALT_LB_ADDR	(CONFIG_SYS_OCM_BASE)
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 
-/*-----------------------------------------------------------------------
+/*
  * I2C
- *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C		1		/* I2C with hardware support	*/
+ */
+#define CONFIG_HARD_I2C				/* I2C with hardware support	*/
 #undef	CONFIG_SOFT_I2C				/* I2C bit-banged		*/
 #define CONFIG_PPC4XX_I2C		/* use PPC4xx driver		*/
 #define CONFIG_SYS_I2C_SPEED		100000		/* I2C speed and slave address	*/
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x53	/* EEPROM AT24C128		*/
+#define CONFIG_SYS_I2C_RTC_ADDR	0x51	/* RTC				*/
+#define CONFIG_SYS_I2C_EEPROM_CPU_ADDR	0x52	/* EEPROM          (CPU Modul)	*/
+#define CONFIG_SYS_I2C_EEPROM_MB_ADDR	0x53	/* EEPROM AT24C128 (MainBoard)	*/
+#define CONFIG_SYS_I2C_DSPIC_ADDR	0x54	/* dsPIC   			*/
+#define CONFIG_SYS_I2C_DSPIC_2_ADDR	0x55	/* dsPIC			*/
+#define CONFIG_SYS_I2C_DSPIC_KEYB_ADDR	0x56	/* dsPIC			*/
+#define CONFIG_SYS_I2C_DSPIC_IO_ADDR	0x57	/* dsPIC			*/
+
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2	/* Bytes of address		*/
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6	/* The Atmel AT24C128 has	*/
 					/* 64 byte page write mode using*/
 					/* last 6 bits of the address	*/
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10   /* and takes up to 10 msec */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
+
+#define CONFIG_RTC_PCF8563			/* enable Philips PCF8563 RTC	*/
+#define CONFIG_SYS_I2C_RTC_ADDR		0x51	/* Philips PCF8563 RTC address	*/
+#define CONFIG_SYS_I2C_KEYBD_ADDR	0x56	/* PIC LWE keyboard		*/
+#define CONFIG_SYS_I2C_DSPIC_IO_ADDR	0x57	/* PIC I/O addr               */
+
+#define I2C_ADDR_LIST	{						\
+			CONFIG_SYS_I2C_RTC_ADDR,			\
+			CONFIG_SYS_I2C_EEPROM_CPU_ADDR,			\
+			CONFIG_SYS_I2C_EEPROM_MB_ADDR,			\
+			CONFIG_SYS_I2C_DSPIC_ADDR,			\
+			CONFIG_SYS_I2C_DSPIC_2_ADDR,			\
+			CONFIG_SYS_I2C_DSPIC_KEYB_ADDR,			\
+			CONFIG_SYS_I2C_DSPIC_IO_ADDR }
 
-#define CONFIG_RTC_PCF8563	1		/* enable Philips PCF8563 RTC	*/
-#define CONFIG_SYS_I2C_RTC_ADDR	0x51		/* Philips PCF8563 RTC address	*/
-#define CONFIG_SYS_I2C_KEYBD_ADDR	0x56		/* PIC LWE keyboard		*/
-#define CONFIG_SYS_I2C_DSPIC_IO_ADDR	0x57		/* PIC I/O addr               */
+/*
+ * Pass open firmware flat tree
+ */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+/* Update size in "reg" property of NOR FLASH device tree nodes */
+#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
 
 #define	CONFIG_POST_KEY_MAGIC	"3C+3E"	/* press F3 + F5 keys to force POST */
-#if 0
-#define	CONFIG_AUTOBOOT_KEYED		/* Enable "password" protection	*/
-#define CONFIG_AUTOBOOT_PROMPT	\
-	"\nEnter password - autoboot in %d sec...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"  "	/* "password"	*/
-#endif
 
 #define	CONFIG_PREBOOT		"setenv bootdelay 15"
 
@@ -314,15 +340,11 @@
 		"cp.b 200000 FFF80000 80000\0"			        \
 	"upd=run load update\0"						\
 	"lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;"	\
-		"source 200000\0"					\
+		"autoscr 200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -410,9 +432,9 @@
 #define CONFIG_CMD_USB
 #endif
 
-/*-----------------------------------------------------------------------
+/*
  * Miscellaneous configurable options
- *----------------------------------------------------------------------*/
+ */
 #define CONFIG_SUPPORT_VFAT
 
 #define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
@@ -445,9 +467,9 @@
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
 
-/*-----------------------------------------------------------------------
+/*
  * PCI stuff
- *----------------------------------------------------------------------*/
+ */
 /* General PCI */
 #define CONFIG_PCI			/* include pci support	        */
 #undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
@@ -461,29 +483,32 @@
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
 #define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
+#ifndef DEBUG
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
+#endif
 #define CONFIG_WD_PERIOD	40000	/* in usec */
 #define CONFIG_WD_MAX_RATE	66600	/* in ticks */
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
+ * have to be in the first 16 MB of memory, since this is
+ * the maximum mapped by the 40x Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ		(16 << 20) /* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTM_LEN		(16 << 20) /* Increase max gunzip size */
 
-/*-----------------------------------------------------------------------
+/*
  * External Bus Controller (EBC) Setup
- *----------------------------------------------------------------------*/
+ */
 #define CONFIG_SYS_FLASH		CONFIG_SYS_FLASH_BASE
 
 /* Memory Bank 0 (NOR-FLASH) initialization					*/
-#define CONFIG_SYS_EBC_PB0AP		0x03050200
+#define CONFIG_SYS_EBC_PB0AP		0x03000280
 #define CONFIG_SYS_EBC_PB0CR		(CONFIG_SYS_FLASH | 0xfc000)
 
 /* Memory Bank 1 (Lime) initialization						*/
 #define CONFIG_SYS_EBC_PB1AP		0x01004380
-#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_LIME_BASE_0 | 0xdc000)
+#define CONFIG_SYS_EBC_PB1CR		(CONFIG_SYS_LIME_BASE_0 | 0xbc000)
 
 /* Memory Bank 2 (FPGA) initialization						*/
 #define CONFIG_SYS_EBC_PB2AP		0x01004400
@@ -495,19 +520,27 @@
 
 #define CONFIG_SYS_EBC_CFG		0xb8400000
 
-/*-----------------------------------------------------------------------
+/*
  * Graphics (Fujitsu Lime)
- *----------------------------------------------------------------------*/
+ */
+/* SDRAM Clock frequency adjustment register */
+#define CONFIG_SYS_LIME_SDRAM_CLOCK	0xC1FC0038
+#if 1 /* 133MHz is not tested enough, use 100MHz for now */
 /* Lime Clock frequency is to set 100MHz */
 #define CONFIG_SYS_LIME_CLOCK_100MHZ	0x00000
-#if 0
+#else
 /* Lime Clock frequency for 133MHz */
 #define CONFIG_SYS_LIME_CLOCK_133MHZ	0x10000
 #endif
 
-/* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
-   and pixel flare on display when 133MHz was configured. According to
-   SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
+/* SDRAM Parameter register */
+#define CONFIG_SYS_LIME_MMR		0xC1FCFFFC
+/*
+ * SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
+ * and pixel flare on display when 133MHz was configured. According to
+ * SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed
+ * Grade
+ */
 #ifdef CONFIG_SYS_LIME_CLOCK_133MHZ
 #define CONFIG_SYS_MB862xx_MMR	0x414FB7F3
 #define CONFIG_SYS_MB862xx_CCF	CONFIG_SYS_LIME_CLOCK_133MHZ
@@ -516,13 +549,15 @@
 #define CONFIG_SYS_MB862xx_CCF	CONFIG_SYS_LIME_CLOCK_100MHZ
 #endif
 
-/*-----------------------------------------------------------------------
+/*
  * GPIO Setup
- *----------------------------------------------------------------------*/
+ */
 #define CONFIG_SYS_GPIO_PHY1_RST	12
 #define CONFIG_SYS_GPIO_FLASH_WP	14
 #define CONFIG_SYS_GPIO_PHY0_RST	22
 #define CONFIG_SYS_GPIO_DSPIC_READY	51
+#define CONFIG_SYS_GPIO_CAN_ENABLE	53
+#define CONFIG_SYS_GPIO_LSB_ENABLE	54
 #define CONFIG_SYS_GPIO_EEPROM_EXT_WP	55
 #define CONFIG_SYS_GPIO_HIGHSIDE	56
 #define CONFIG_SYS_GPIO_EEPROM_INT_WP	57
@@ -532,7 +567,7 @@
 #define CONFIG_SYS_GPIO_SYSMON_STATUS	62
 #define CONFIG_SYS_GPIO_WATCHDOG	63
 
-/*-----------------------------------------------------------------------
+/*
  * PPC440 GPIO Configuration
  */
 #define CONFIG_SYS_4xx_GPIO_TABLE { /*	  Out		  GPIO	Alternate1	Alternate2	Alternate3 */ \
diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c
index 0e6d908..913cd97 100644
--- a/post/board/lwmon5/dsp.c
+++ b/post/board/lwmon5/dsp.c
@@ -33,20 +33,37 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define DSP_STATUS_REG 0xC4000008
+#define DSP_STATUS_REG		0xC4000008
+#define FPGA_STATUS_REG		0xC400000C
 
 int dsp_post_test(int flags)
 {
+	uint   old_value;
 	uint   read_value;
 	int    ret;
 
+	/* momorize fpga status */
+	old_value = in_be32((void *)FPGA_STATUS_REG);
+	/* enable outputs */
+	out_be32((void *)FPGA_STATUS_REG, 0x30);
+
+	/* generate sync signal */
+	out_be32((void *)DSP_STATUS_REG, 0x300);
+	udelay(5);
+	out_be32((void *)DSP_STATUS_REG, 0);
+	udelay(500);
+
+	/* read status */
 	ret = 0;
 	read_value = in_be32((void *)DSP_STATUS_REG) & 0x3;
-	if (read_value != 0x3) {
+	if (read_value != 0x03) {
 		post_log("\nDSP status read %08X\n", read_value);
 		ret = 1;
 	}
 
+	/* restore fpga status */
+	out_be32((void *)FPGA_STATUS_REG, old_value);
+
 	return ret;
 }
 
diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c
index ff2ed05..8616739 100644
--- a/post/board/lwmon5/dspic.c
+++ b/post/board/lwmon5/dspic.c
@@ -38,14 +38,16 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define DSPIC_POST_ERROR_REG	0x800
 #define DSPIC_SYS_ERROR_REG	0x802
-#define DSPIC_VERSION_REG	0x804
+#define DSPIC_SYS_VERSION_REG	0x804
+#define DSPIC_FW_VERSION_REG	0x808
 
 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
 
 /* Verify that dsPIC ready test done early at hw init passed ok */
 int dspic_init_post_test(int flags)
 {
-	if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) & CONFIG_SYS_DSPIC_TEST_MASK) {
+	if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) &
+	    CONFIG_SYS_DSPIC_TEST_MASK) {
 		post_log("dsPIC init test failed\n");
 		return 1;
 	}
@@ -57,46 +59,60 @@ int dspic_init_post_test(int flags)
 
 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
 /* Read a register from the dsPIC. */
-int dspic_read(ushort reg)
+int dspic_read(ushort reg, ushort *data)
 {
-	uchar buf[2];
+	uchar buf[sizeof(*data)];
+	int rval;
 
 	if (i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2))
 		return -1;
+	rval = i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, sizeof(reg),
+			buf, sizeof(*data));
+	*data = (buf[0] << 8) | buf[1];
 
-	return (uint)((buf[0] << 8) | buf[1]);
+	return rval;
 }
 
 /* Verify error codes regs, display version */
 int dspic_post_test(int flags)
 {
-	int data;
+	ushort data;
 	int ret = 0;
 
 	post_log("\n");
-	data = dspic_read(DSPIC_VERSION_REG);
-	if (data == -1) {
-		post_log("dsPIC : failed read version\n");
+
+	/* read dspic FW-Version */
+	if (dspic_read(DSPIC_FW_VERSION_REG, &data)) {
+		post_log("dsPIC: failed read FW-Version\n");
+		ret = 1;
+	} else {
+		post_log("dsPIC FW-Version:  %u.%u\n",
+			 (data >> 8) & 0xFF, data & 0xFF);
+	}
+
+	/* read dspic SYS-Version */
+	if (dspic_read(DSPIC_SYS_VERSION_REG, &data)) {
+		post_log("dsPIC: failed read version\n");
 		ret = 1;
 	} else {
-		post_log("dsPIC version: %u.%u\n",
-			(data >> 8) & 0xFF, data & 0xFF);
+		post_log("dsPIC SYS-Version: %u.%u\n",
+			 (data >> 8) & 0xFF, data & 0xFF);
 	}
 
-	data = dspic_read(DSPIC_POST_ERROR_REG);
-	if (data != 0) ret = 1;
-	if (data == -1) {
-		post_log("dsPIC : failed read POST code\n");
+	/* read dspic POST error code */
+	if (dspic_read(DSPIC_POST_ERROR_REG, &data)) {
+		post_log("dsPIC: failed read POST code\n");
+		ret = 1;
 	} else {
-		post_log("dsPIC POST code 0x%04X\n", data);
+		post_log("dsPIC POST-ERROR   code:  0x%04X\n", data);
 	}
 
-	data = dspic_read(DSPIC_SYS_ERROR_REG);
-	if (data == -1) {
-		post_log("dsPIC : failed read system error\n");
+	/* read dspic SYS error code */
+	if ((data = dspic_read(DSPIC_SYS_ERROR_REG, &data))) {
+		post_log("dsPIC: failed read system error\n");
 		ret = 1;
 	} else {
-		post_log("dsPIC SYS-ERROR code: 0x%04X\n", data);
+		post_log("dsPIC SYS-ERROR    code:  0x%04X\n", data);
 	}
 
 	return ret;
diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c
index 2b84290..3067548 100644
--- a/post/board/lwmon5/fpga.c
+++ b/post/board/lwmon5/fpga.c
@@ -28,7 +28,7 @@
  */
 
 #include <post.h>
-
+#include <watchdog.h>
 #include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -38,18 +38,28 @@ DECLARE_GLOBAL_DATA_PTR;
 #define FPGA_RAM_START		0xC4200000
 #define FPGA_RAM_END		0xC4203FFF
 #define FPGA_STAT		0xC400000C
+#define FPGA_BUFFER		0x00800000
+#define FPGA_RAM_SIZE		(FPGA_RAM_END - FPGA_RAM_START + 1)
 
 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC3
 
-/* Testpattern for fpga memorytest */
-static uint pattern[] = {
+const static unsigned long pattern[] = {
+	0xffffffff,
+	0xaaaaaaaa,
+	0xcccccccc,
+	0xf0f0f0f0,
+	0xff00ff00,
+	0xffff0000,
+	0x0000ffff,
+	0x00ff00ff,
+	0x0f0f0f0f,
+	0x33333333,
 	0x55555555,
-	0xAAAAAAAA,
-	0xAA5555AA,
-	0x55AAAA55,
-	0x0
+	0x00000000,
 };
 
+const static unsigned long otherpattern = 0x01234567;
+
 static int one_scratch_test(uint value)
 {
 	uint read_value;
@@ -62,51 +72,226 @@ static int one_scratch_test(uint value)
 	read_value = in_be32((void *)FPGA_SCRATCH_REG);
 	if (read_value != value) {
 		post_log("FPGA SCRATCH test failed write %08X, read %08X\n",
-			value, read_value);
-		ret = 1;
+			 value, read_value);
+		ret = -1;
+	}
+
+	return ret;
+}
+
+static int fpga_post_test1(ulong *start, ulong size, ulong val)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = val;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != val) {
+			post_log("FPGA Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, val, readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+	return ret;
+}
+
+static int fpga_post_test2(ulong *start, ulong size)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = 1 << (i % 32);
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != 1 << (i % 32)) {
+			post_log("FPGA Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, 1 << (i % 32), readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	return ret;
+}
+
+static int fpga_post_test3(ulong *start, ulong size)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = i;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != i) {
+			post_log("FPGA Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, i, readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	return ret;
+}
+
+static int fpga_post_test4(ulong *start, ulong size)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = ~i;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != ~i) {
+			post_log("FPGA Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, ~i, readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
 	}
 
 	return ret;
 }
 
 /* FPGA Memory-pattern-test */
-static int fpga_mem_test(void * address)
+static int fpga_mem_test(void)
 {
-	int ret = 1;
-	uint read_value;
-	uint old_value;
-	uint i = 0;
-	/* save content */
-	old_value = in_be32(address);
-
-	while (pattern[i] != 0) {
-		out_be32(address, pattern[i]);
-		/* read other location (protect against data lines capacity) */
-		ret = in_be16((void *)FPGA_VERSION_REG);
-		/* verify test pattern */
-		read_value = in_be32(address);
-
-		if (read_value != pattern[i]) {
-			post_log("FPGA Memory test failed.");
-			post_log(" write %08X, read %08X at address %08X\n",
-				pattern[i], read_value, address);
+	int ret = 0;
+	ulong* start = (ulong *)FPGA_RAM_START;
+	ulong  size  = FPGA_RAM_SIZE;
+
+	if (ret == 0)
+		ret = fpga_post_test1(start, size, 0x00000000);
+
+	if (ret == 0)
+		ret = fpga_post_test1(start, size, 0xffffffff);
+
+	if (ret == 0)
+		ret = fpga_post_test1(start, size, 0x55555555);
+
+	if (ret == 0)
+		ret = fpga_post_test1(start, size, 0xaaaaaaaa);
+
+	WATCHDOG_RESET();
+
+	if (ret == 0)
+		ret = fpga_post_test2(start, size);
+
+	if (ret == 0)
+		ret = fpga_post_test3(start, size);
+
+	if (ret == 0)
+		ret = fpga_post_test4(start, size);
+
+	return ret;
+}
+
+
+
+/* Verify FPGA addresslines */
+static int fpga_post_addrline(ulong *address, ulong *base, ulong size)
+{
+	unsigned long *target;
+	unsigned long *end;
+	unsigned long readback;
+	unsigned long xor;
+	int ret = 0;
+
+	end = (ulong *)((ulong)base + size);
+	xor = 0;
+
+	for (xor = sizeof(ulong); xor > 0; xor <<= 1) {
+		target = (ulong*)((ulong)address ^ xor);
+		if ((target >= base) && (target < end)) {
+			*address = ~*target;
+			readback = *target;
+
+			if (readback == *address) {
+				post_log("Memory (address line) error at %08x"
+					 "XOR value %08x !\n",
+					 address, target, xor);
+				ret = -1;
+				break;
+			}
+		}
+	}
+
+	return ret;
+}
+
+/* Verify FPGA addresslines */
+static int fpga_post_dataline(ulong *address)
+{
+	unsigned long temp32 = 0;
+	int i = 0;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(pattern); i++) {
+		*address = pattern[i];
+		/*
+		 * Put a different pattern on the data lines: otherwise they
+		 * may float long enough to read back what we wrote.
+		 */
+		*(address + 1) = otherpattern;
+		temp32 = *address;
+
+		if (temp32 != pattern[i]){
+			post_log("Memory (date line) error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 address, pattern[i], temp32);
 			ret = 1;
-			goto out;
 		}
-		i++;
 	}
 
-	ret = 0;
-out:
-	out_be32(address, old_value);
 	return ret;
 }
+
 /* Verify FPGA, get version & memory size */
 int fpga_post_test(int flags)
 {
-	uint   address;
 	uint   old_value;
-	ushort version;
+	uint   version;
 	uint   read_value;
 	int    ret = 0;
 
@@ -120,24 +305,57 @@ int fpga_post_test(int flags)
 
 	out_be32((void *)FPGA_SCRATCH_REG, old_value);
 
-	version = in_be16((void *)FPGA_VERSION_REG);
-	post_log("FPGA : version %u.%u\n",
-		(version >> 8) & 0xFF, version & 0xFF);
+	version = in_be32((void *)FPGA_VERSION_REG);
+	post_log("FPGA version %u.%u\n",
+		 (version >> 8) & 0xFF, version & 0xFF);
 
 	/* Enable write to FPGA RAM */
 	out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000);
 
-	read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, 0x4000);
-	post_log("FPGA RAM size: %d bytes\n", read_value);
+	/* get RAM size */
+	read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, FPGA_RAM_SIZE);
+	post_log("FPGA RAM size %d bytes\n", read_value);
+	WATCHDOG_RESET();
 
-	for (address = 0; address < 0x1000; address++) {
-		if (fpga_mem_test((void *)(FPGA_RAM_START + 4*address)) == 1) {
-			ret = 1;
-			goto out;
-		}
+	/* copy fpga memory to DDR2 RAM*/
+	memcpy((void *)FPGA_BUFFER,(void *)FPGA_RAM_START, FPGA_RAM_SIZE);
+	WATCHDOG_RESET();
+
+	/* Test datalines */
+	if (fpga_post_dataline((ulong *)FPGA_RAM_START)) {
+		ret = 1;
+		goto out;
+	}
+	WATCHDOG_RESET();
+
+	/* Test addresslines */
+	if (fpga_post_addrline((ulong *)FPGA_RAM_START,
+			       (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) {
+		ret = 1;
+		goto out;
 	}
+	WATCHDOG_RESET();
+	if (fpga_post_addrline((ulong *)FPGA_RAM_END - sizeof(long),
+			       (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) {
+		ret = 1;
+		goto out;
+	}
+	WATCHDOG_RESET();
+
+	/* Memory Pattern Test */
+	if (fpga_mem_test()) {
+		ret = 1;
+		goto out;
+	}
+	WATCHDOG_RESET();
+
+	/* restore memory */
+	memcpy((void *)FPGA_RAM_START,(void *)FPGA_BUFFER, FPGA_RAM_SIZE);
+	WATCHDOG_RESET();
 
 out:
+	/* Disable write to RAM */
+	out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) & 0xEFFF);
 	return ret;
 }
 
diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c
index eb16e36..719194b 100644
--- a/post/board/lwmon5/gdc.c
+++ b/post/board/lwmon5/gdc.c
@@ -28,18 +28,39 @@
  */
 
 #include <post.h>
-
+#include <watchdog.h>
 #include <asm/io.h>
+#include <video.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define GDC_SCRATCH_REG 0xC1FF8044
-#define GDC_VERSION_REG 0xC1FF8084
-#define GDC_RAM_START   0xC0000000
-#define GDC_RAM_END     0xC2000000
+#define GDC_SCRATCH_REG	0xC1FF8044
+#define GDC_VERSION_REG	0xC1FF8084
+#define GDC_HOST_BASE	0xC1FC0000
+#define GDC_RAM_START	0xC0000000
+#define GDC_RAM_END	(GDC_HOST_BASE - 1)
+#define GDC_RAM_SIZE	(GDC_RAM_END - GDC_RAM_START)
 
 #if CONFIG_POST & CONFIG_SYS_POST_BSPEC4
 
+const static unsigned long pattern[] = {
+	0xffffffff,
+	0xaaaaaaaa,
+	0xcccccccc,
+	0xf0f0f0f0,
+	0xff00ff00,
+	0xffff0000,
+	0x0000ffff,
+	0x00ff00ff,
+	0x0f0f0f0f,
+	0x33333333,
+	0x55555555,
+	0x00000000
+};
+
+const static unsigned long otherpattern = 0x01234567;
+
+/* test write/read og a given LIME Register */
 static int gdc_test_reg_one(uint value)
 {
 	int ret;
@@ -53,17 +74,229 @@ static int gdc_test_reg_one(uint value)
 	read_value = in_be32((void *)GDC_SCRATCH_REG);
 	if (read_value != value) {
 		post_log("GDC SCRATCH test failed write %08X, read %08X\n",
-			value, read_value);
+			 value, read_value);
 	}
 
 	return (read_value != value);
 }
 
-/* Verify GDC, get memory size */
+/* test with a given static 32 bit pattern in a given memory addressrange */
+static int gdc_post_test1(ulong *start, ulong size, ulong val)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = val;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != val) {
+			post_log("GDC Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, val, readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	return ret;
+}
+
+/* test with dynamic 32 bit pattern in a given memory addressrange */
+static int gdc_post_test2(ulong *start, ulong size)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = 1 << (i % 32);
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != 1 << (i % 32)) {
+			post_log("GDC Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, 1 << (i % 32), readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	return ret;
+}
+
+/* test with dynamic 32 bit pattern in a given memory addressrange */
+static int gdc_post_test3(ulong *start, ulong size)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = i;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != i) {
+			post_log("GDC Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, i, readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	return ret;
+}
+
+/* test with dynamic 32 bit pattern in a given memory addressrange */
+static int gdc_post_test4(ulong *start, ulong size)
+{
+	int ret = 0;
+	ulong i = 0;
+	ulong *mem = start;
+	ulong readback;
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		mem[i] = ~i;
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	for (i = 0; i < size / sizeof(ulong); i++) {
+		readback = mem[i];
+		if (readback != ~i) {
+			post_log("GDC Memory error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 mem + i, ~i, readback);
+			ret = -1;
+			break;
+		}
+		if (i % 1024 == 0)
+			WATCHDOG_RESET();
+	}
+
+	return ret;
+}
+
+/* do some patterntests in a given addressrange */
+int gdc_mem_test(ulong *start, ulong size)
+{
+	int ret = 0;
+
+	/*
+	 * check addressrange and do different static and dynamic
+	 * pattern tests with it.
+	 */
+	if (((void *)start) + size <= (void *)GDC_RAM_END) {
+		if (ret == 0)
+			ret = gdc_post_test1(start, size, 0x00000000);
+
+		if (ret == 0)
+			ret = gdc_post_test1(start, size, 0xffffffff);
+
+		if (ret == 0)
+			ret = gdc_post_test1(start, size, 0x55555555);
+
+		if (ret == 0)
+			ret = gdc_post_test1(start, size, 0xaaaaaaaa);
+
+		if (ret == 0)
+			ret = gdc_post_test2(start, size);
+
+		if (ret == 0)
+			ret = gdc_post_test3(start, size);
+
+		if (ret == 0)
+			ret = gdc_post_test4(start, size);
+	}
+
+	return ret;
+}
+
+/* test function of gdc memory addresslines*/
+static int gdc_post_addrline(ulong *address, ulong *base, ulong size)
+{
+	ulong *target;
+	ulong *end;
+	ulong readback = 0;
+	ulong xor = 0;
+	int ret = 0;
+
+	end = (ulong *)((ulong)base + size);
+
+	for (xor = sizeof(long); xor > 0; xor <<= 1) {
+		target = (ulong *)((ulong)address ^ xor);
+		if ((target >= base) && (target < end)) {
+			*address = ~*target;
+			readback = *target;
+		}
+
+		if (readback == *address) {
+			post_log("GDC Memory (address line) error at %08x"
+				 "XOR value %08x !\n",
+				 address, target , xor);
+			ret = -1;
+			break;
+		}
+	}
+
+	return ret;
+}
+
+static int gdc_post_dataline(ulong *address)
+{
+	unsigned long temp32 = 0;
+	int i = 0;
+	int ret = 0;
+
+	for (i = 0; i < ARRAY_SIZE(pattern); i++) {
+		*address = pattern[i];
+		/*
+		 * Put a different pattern on the data lines: otherwise they
+		 * may float long enough to read back what we wrote.
+		 */
+		*(address + 1) = otherpattern;
+		temp32 = *address;
+
+		if (temp32 != pattern[i]){
+			post_log("GDC Memory (date line) error at %08x, "
+				 "wrote %08x, read %08x !\n",
+				 address, pattern[i], temp32);
+			ret = 1;
+		}
+	}
+
+	return ret;
+}
+
+/* Verify GDC, get memory size, verify GDC memory */
 int gdc_post_test(int flags)
 {
-	uint   old_value;
-	int    ret = 0;
+	uint   	old_value;
+	int 	i = 0;
+	int    	ret = 0;
 
 	post_log("\n");
 	old_value = in_be32((void *)GDC_SCRATCH_REG);
@@ -84,13 +317,64 @@ int gdc_post_test(int flags)
 
 	old_value = in_be32((void *)GDC_VERSION_REG);
 	post_log("GDC chip version %u.%u, year %04X\n",
-		(old_value >> 8) & 0xFF, old_value & 0xFF,
-		(old_value >> 16) & 0xFFFF);
+		 (old_value >> 8) & 0xFF, old_value & 0xFF,
+		 (old_value >> 16) & 0xFFFF);
 
 	old_value = get_ram_size((void *)GDC_RAM_START,
-				 GDC_RAM_END - GDC_RAM_START);
+				 0x02000000);
+
+	debug("GDC RAM size (ist):  %d bytes\n", old_value);
+	debug("GDC RAM size (soll): %d bytes\n", GDC_RAM_SIZE);
 	post_log("GDC RAM size: %d bytes\n", old_value);
 
+	/* Test SDRAM datalines */
+	if (gdc_post_dataline((ulong *)GDC_RAM_START)) {
+		ret = 1;
+		goto out;
+	}
+	WATCHDOG_RESET();
+
+	/* Test SDRAM adresslines */
+	if (gdc_post_addrline((ulong *)GDC_RAM_START,
+			      (ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
+		ret = 1;
+		goto out;
+	}
+	WATCHDOG_RESET();
+	if (gdc_post_addrline((ulong *)GDC_RAM_END - sizeof(long),
+			      (ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
+		ret = 1;
+		goto out;
+	}
+	WATCHDOG_RESET();
+
+	/* memory pattern test */
+	debug("GDC Memory test (flags %8x:%8x)\n", flags,
+	      POST_SLOWTEST | POST_MANUAL);
+
+	if (flags & POST_MANUAL) {
+		debug("Full memory test\n");
+		if (gdc_mem_test((ulong *)GDC_RAM_START, GDC_RAM_SIZE)) {
+			ret = 1;
+			goto out;
+		}
+		/* load splashscreen again */
+	} else {
+		debug("smart memory test\n");
+		for (i = 0; i < (GDC_RAM_SIZE >> 20) && ret == 0; i++) {
+			if (ret == 0)
+				ret = gdc_mem_test((ulong *)(GDC_RAM_START +
+							     (i << 20)),
+						   0x800);
+			if (ret == 0)
+				ret = gdc_mem_test((ulong *)(GDC_RAM_START +
+							     (i << 20) + 0xff800),
+						   0x800);
+		}
+	}
+	WATCHDOG_RESET();
+
+out:
 	return ret;
 }
 #endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */
diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c
index 9c49d0e..4a78240 100644
--- a/post/board/lwmon5/sysmon.c
+++ b/post/board/lwmon5/sysmon.c
@@ -56,7 +56,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 /* from dspic.c */
-extern int dspic_read(ushort reg);
+extern int dspic_read(ushort reg, ushort *data);
 
 #define REG_TEMPERATURE			0x12BC
 #define REG_VOLTAGE_5V			0x12CA
@@ -76,31 +76,38 @@ extern int dspic_read(ushort reg);
 typedef struct sysmon_s sysmon_t;
 typedef struct sysmon_table_s sysmon_table_t;
 
-static void sysmon_dspic_init (sysmon_t * this);
-static int sysmon_dspic_read (sysmon_t * this, uint addr);
-static void sysmon_backlight_disable (sysmon_table_t * this);
+static void sysmon_dspic_init(sysmon_t *this);
+static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val);
+static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr,  int *val);
+static void sysmon_backlight_disable(sysmon_table_t *this);
 
-struct sysmon_s
-{
+struct sysmon_s {
 	uchar	chip;
 	void	(*init)(sysmon_t *);
-	int	(*read)(sysmon_t *, uint);
+	int	(*read)(sysmon_t *, uint, int *);
 };
 
-static sysmon_t sysmon_dspic =
-	{CONFIG_SYS_I2C_DSPIC_IO_ADDR, sysmon_dspic_init, sysmon_dspic_read};
+static sysmon_t sysmon_dspic = {
+	CONFIG_SYS_I2C_DSPIC_IO_ADDR,
+	sysmon_dspic_init,
+	sysmon_dspic_read
+};
 
-static sysmon_t * sysmon_list[] =
-{
+static sysmon_t sysmon_dspic_sgn = {
+	CONFIG_SYS_I2C_DSPIC_IO_ADDR,
+	sysmon_dspic_init,
+	sysmon_dspic_read_sgn
+};
+
+static sysmon_t *sysmon_list[] = {
 	&sysmon_dspic,
 	NULL
 };
 
-struct sysmon_table_s
-{
-	char *		name;
-	char *		unit_name;
-	sysmon_t *	sysmon;
+struct sysmon_table_s {
+	char		*name;
+	char		*unit_name;
+	sysmon_t	*sysmon;
 	void		(*exec_before)(sysmon_table_t *);
 	void		(*exec_after)(sysmon_table_t *);
 
@@ -118,37 +125,43 @@ struct sysmon_table_s
 	uint		addr;
 };
 
-static sysmon_table_t sysmon_table[] =
-{
+static sysmon_table_t sysmon_table[] = {
 	{
-	"Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable,
-	1, 1, -32768, 32767, 0xFFFF,
-	0x8000 + TEMPERATURE_MIN,	  0x8000 + TEMPERATURE_MAX,	    0,
-	0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0,
-	REG_TEMPERATURE,
+		"Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable,
+		1, 1, -32768, 32767, 0xFFFF,
+		0x8000 + TEMPERATURE_MIN,	  0x8000 + TEMPERATURE_MAX,	    0,
+		0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0,
+		REG_TEMPERATURE,
 	},
 
 	{
-	"+ 5 V", "V", &sysmon_dspic, NULL, NULL,
-	100, 1000, -0x8000, 0x7FFF, 0xFFFF,
-	0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
-	0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
-	REG_VOLTAGE_5V,
+		"+ 5 V", "V", &sysmon_dspic, NULL, NULL,
+		100, 1000, -0x8000, 0x7FFF, 0xFFFF,
+		0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
+		0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0,
+		REG_VOLTAGE_5V,
 	},
 
 	{
-	"+ 5 V standby", "V", &sysmon_dspic, NULL, NULL,
-	100, 1000, -0x8000, 0x7FFF, 0xFFFF,
-	0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
-	0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
-	REG_VOLTAGE_5V_STANDBY,
+		"+ 5 V standby", "V", &sysmon_dspic, NULL, NULL,
+		100, 1000, -0x8000, 0x7FFF, 0xFFFF,
+		0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
+		0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0,
+		REG_VOLTAGE_5V_STANDBY,
+	},
+
+	{
+		"Temperature", "°C", &sysmon_dspic_sgn, NULL, sysmon_backlight_disable,
+		1, 1, -32768, 32767, 0xFFFF,
+		0x8000 + TEMPERATURE_MIN,	  0x8000 + TEMPERATURE_MAX,	    0,
+		0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0,
+		REG_TEMPERATURE,
 	},
 };
-static int sysmon_table_size = sizeof(sysmon_table) / sizeof(sysmon_table[0]);
 
-int sysmon_init_f (void)
+int sysmon_init_f(void)
 {
-	sysmon_t ** l;
+	sysmon_t **l;
 
 	for (l = sysmon_list; *l; l++)
 		(*l)->init(*l);
@@ -156,12 +169,12 @@ int sysmon_init_f (void)
 	return 0;
 }
 
-void sysmon_reloc (void)
+void sysmon_reloc(void)
 {
 	/* Do nothing for now, sysmon_reloc() is required by the sysmon post */
 }
 
-static char *sysmon_unit_value (sysmon_table_t *s, uint val)
+static char *sysmon_unit_value(sysmon_table_t *s, uint val)
 {
 	static char buf[32];
 	char *p, sign;
@@ -176,14 +189,13 @@ static char *sysmon_unit_value (sysmon_table_t *s, uint val)
 	if (unit_val < 0) {
 		sign = '-';
 		unit_val = -unit_val;
-	} else
+	} else {
 		sign = '+';
+	}
 
 	p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div);
 
-
 	frac = unit_val % s->unit_div;
-
 	frac /= (s->unit_div / s->unit_precision);
 
 	decimal = s->unit_precision;
@@ -197,58 +209,84 @@ static char *sysmon_unit_value (sysmon_table_t *s, uint val)
 	return buf;
 }
 
-static void sysmon_dspic_init (sysmon_t * this)
+static void sysmon_dspic_init(sysmon_t *this)
 {
 }
 
-static int sysmon_dspic_read (sysmon_t * this, uint addr)
+static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val)
 {
-	int res = dspic_read(addr);
+	ushort data;
+
+	if (dspic_read(addr, &data) == 0){
+		/* To fit into the table range we should add 0x8000 */
+		*val = data + 0x8000;
+		return 0;
+	}
 
-	/* To fit into the table range we should add 0x8000 */
-	return (res == -1) ? -1 : (res + 0x8000);
+	return -1;
 }
 
-static void sysmon_backlight_disable (sysmon_table_t * this)
+static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val)
+{
+	ushort data;
+
+	if (dspic_read(addr, &data) == 0){
+		/* To fit into the table range we should add 0x8000 */
+		*val = (signed short)data + 0x8000;
+		return 0;
+	}
+
+	return -1;
+}
+
+static void sysmon_backlight_disable(sysmon_table_t *this)
 {
 #if defined(CONFIG_VIDEO)
 	board_backlight_switch(this->val_valid_alt);
 #endif
 }
 
-int sysmon_post_test (int flags)
+int sysmon_post_test(int flags)
 {
 	int res = 0;
 	sysmon_table_t * t;
 	int val;
 
-	for (t = sysmon_table; t < sysmon_table + sysmon_table_size; t ++) {
+	for (t = sysmon_table; t < sysmon_table + ARRAY_SIZE(sysmon_table); t++) {
+		t->val_valid = 1;
 		if (t->exec_before)
 			t->exec_before(t);
 
-		val = t->sysmon->read(t->sysmon, t->addr);
-		if (val != -1) {
-			t->val_valid = val >= t->val_min && val <= t->val_max;
-			t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
-		} else {
+		if (t->sysmon->read(t->sysmon, t->addr, &val) != 0) {
 			t->val_valid = 0;
 			t->val_valid_alt = 0;
+			post_log(": read failed\n");
+			res = 1;
+			break;
+		}
+
+		if (t->val_valid != 0) {
+			t->val_valid = val >= t->val_min && val <= t->val_max;
+			t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt;
 		}
 
 		if (t->exec_after)
 			t->exec_after(t);
 
-		if ((!t->val_valid) || (flags & POST_MANUAL)) {
-			printf("%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
-			printf("allowed range");
-			printf(" %-8s ..", sysmon_unit_value(t, t->val_min));
-			printf(" %-8s", sysmon_unit_value(t, t->val_max));
-			printf("     %s\n", t->val_valid ? "OK" : "FAIL");
+		if ((!t->val_valid) || (flags)) {
+			post_log("\n\t%-17s = %-10s ", t->name, sysmon_unit_value(t, val));
+			post_log("allowed range");
+			post_log(" %-8s ..", sysmon_unit_value(t, t->val_min));
+			post_log(" %-8s", sysmon_unit_value(t, t->val_max));
+			post_log("     %s", t->val_valid ? "OK" : "FAIL");
 		}
 
-		if (!t->val_valid)
+		if (!t->val_valid) {
 			res = 1;
+			break;
+		}
 	}
+	post_log("\n");
 
 	return res;
 }
diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c
index f181506..4e5ed0d 100644
--- a/post/board/lwmon5/watchdog.c
+++ b/post/board/lwmon5/watchdog.c
@@ -57,8 +57,11 @@ int sysmon1_post_test(int flags)
 		 * 3.1. GPIO62 is low
 		 * Assuming system voltage failure.
 		 */
-		post_log("Abnormal voltage detected (GPIO62)\n");
+		post_log("sysmon1 Abnormal voltage detected (GPIO62)\n");
+		post_log("POST sysmon1 FAILED\n");
 		return 1;
+	} else {
+		post_log("sysmon1 PASSED\n");
 	}
 
 	return 0;
@@ -117,10 +120,16 @@ int lwmon5_watchdog_post_test(int flags)
 		ulong time;
 		/* 3.3.1. So, the test succeed, save measured time to syslog. */
 		time = in_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR);
-		post_log("hw watchdog time : %u ms, passed ", time);
-		/* 3.3.2. Set scratch register 1 to 0x0000xxxx */
-		watchdog_magic_write(0);
-		return 0;
+		if (time > 90 ) { /* ms*/
+			post_log("hw watchdog time : %u ms, passed ", time);
+			/* 3.3.2. Set scratch register 1 to 0x0000xxxx */
+			watchdog_magic_write(0);
+			return 0;
+		} else {
+			/*test minimum watchdogtime */
+			post_log("hw watchdog time : %u ms, failed ", time);
+			return 2;
+		}
 	}
 	return -1;
 }