* Patch by Denis Peter, 04 June 2003:

  add support for the MIP405T board

12 files changed, 275 insertions, 96 deletions

diff --git a/CHANGELOG b/CHANGELOG
index a7c286a..20026fa 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,9 @@
 Changes since U-Boot 0.3.1:
 ======================================================================
 
+* Patch by Denis Peter, 04 June 2003:
+  add support for the MIP405T board
+
 * Patches by Udi Finkelstein, 2 June 2003:
   - Added support for custom keyboards, initialized by defining a
     board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
diff --git a/MAKEALL b/MAKEALL
index 4506223..b6f636c 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -48,9 +48,9 @@ LIST_4xx="	\
         CANBT		CPCI405		CPCI4052 	CPCI405AB       \
         CPCI440         CPCIISER4	CRAYL1  	DASA_SIM	\
         DU405    	EBONY           ERIC  		MIP405  	\
-        ML2		OCRTC		ORSG		PCI405          \
-        PIP405		PMC405          W7OLMC		W7OLMG          \
-        WALNUT405	\
+        MIP405T		ML2		OCRTC		ORSG		\
+	PCI405		PIP405		PMC405          W7OLMC		\
+	W7OLMG          WALNUT405	\
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index 7c66a63..8ceaad1 100644
--- a/Makefile
+++ b/Makefile
@@ -449,6 +449,11 @@ ERIC_config:unconfig
 MIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
 
+MIP405T_config:unconfig
+	@echo "#define CONFIG_MIP405T" >include/config.h
+	@echo "Enable subset config for MIP405T"
+	@./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
+
 ML2_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml2
 
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 48ffbee..aa2ba6f 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -59,6 +59,7 @@ int mpl_prg(unsigned long src,unsigned long size)
 	flash_info_t *info;
 	int i,rc;
 #if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
+	char *copystr = (char *)src;
 	unsigned long *magic = (unsigned long *)src;
 #endif
 
@@ -69,8 +70,25 @@ int mpl_prg(unsigned long src,unsigned long size)
 		printf("Bad Magic number\n");
 		return -1;
 	}
-
-  	start = 0 - size;
+	/* some more checks before we delete the Flash... */
+	/* Checking the ISO_STRING prevents to program a
+	 * wrong Firmware Image into the flash.
+	 */
+	i=4; /* skip Magic number */
+	while(1) {
+		if(strncmp(&copystr[i],"MEV-",4)==0)
+			break;
+		if(i++>=0x100) {
+			printf("Firmware Image for unknown Target\n");
+			return -1;
+		}
+	}
+	/* we have the ISO STRING, check */
+	if(strncmp(&copystr[i],CONFIG_ISO_STRING,sizeof(CONFIG_ISO_STRING)-1)!=0) {
+		printf("Wrong Firmware Image: %s\n",&copystr[i]);
+		return -1;
+	}
+	start = 0 - size;
 	for(i=info->sector_count-1;i>0;i--)
 	{
 		info->protect[i] = 0; /* unprotect this sector */
diff --git a/board/mpl/common/pci_parts.h b/board/mpl/common/pci_parts.h
index 944585f..a8e3232 100644
--- a/board/mpl/common/pci_parts.h
+++ b/board/mpl/common/pci_parts.h
@@ -108,17 +108,23 @@ static struct pci_pip405_config_entry piix4_isa_bridge_f0[] = {
 /* PIIX4 IDE Controller Function 1 */
 static struct pci_pip405_config_entry piix4_ide_cntrl_f1[] = {
 	{PCI_COMMAND,		0x0001,		2}, /* enable IO access 	*/
+#if !defined(CONFIG_MIP405T)
 	{PCI_CFG_PIIX4_IDETIM,	0x80008000,	4}, /* enable Both IDE channels	*/
+#else
+	{PCI_CFG_PIIX4_IDETIM,	0x80000000,	4}, /* enable IDE channel0	*/
+#endif
 	{ }					    /* end of device table 	*/
 };
 
 /* PIIX4 USB Controller Function 2 */
 static struct pci_pip405_config_entry piix4_usb_cntrl_f2[] = {
+#if !defined(CONFIG_MIP405T)
 	{PCI_INTERRUPT_LINE,	31,		1}, /* Int vector = 31 		*/
 	{PCI_BASE_ADDRESS_4,	0x0000E001,	4}, /* Set IO Address to 0xe000 to 0xe01F */
 	{PCI_LATENCY_TIMER,	0x80,		1}, /* Latency Timer 0x80 	*/
 	{0xC0,			0x2000,		2}, /* Legacy support 		*/
 	{PCI_COMMAND,		0x0005,		2}, /* enable IO access and Master */
+#endif
 	{ }					    /* end of device table 	*/
 };
 
diff --git a/board/mpl/mip405/init.S b/board/mpl/mip405/init.S
index f0a500a..ad3f78d 100644
--- a/board/mpl/mip405/init.S
+++ b/board/mpl/mip405/init.S
@@ -50,9 +50,13 @@
 #include "mip405.h"
 
 
- 	.globl	ext_bus_cntlr_init
+  .globl ext_bus_cntlr_init
 ext_bus_cntlr_init:
-  mflr    r4                      /* save link register */
+  mflr   r4                      /* save link register */
+  mfdcr  r3,strap                /* get strapping reg */
+  andi.  r0, r3, PSR_ROM_LOC     /* mask out irrelevant bits */
+  bnelr                          /* jump back if PCI boot */
+
   bl      ..getAddr
 ..getAddr:
   mflr    r3                      /* get address of ..getAddr */
@@ -200,3 +204,45 @@ sdram_init:
 
   blr
 
+
+#if defined(CONFIG_BOOT_PCI)
+    .section .bootpg,"ax"
+    .globl _start_pci
+/*******************************************
+ */
+
+_start_pci:
+  /* first handle errata #68 / PCI_18 */
+  iccci   r0, r0          /* invalidate I-cache */
+  lis     r31, 0
+  mticcr  r31             /* ICCR = 0 (all uncachable) */
+  isync
+
+  mfccr0  r28             /* set CCR0[24] = 1 */
+  ori     r28, r28, 0x0080
+  mtccr0  r28
+
+  /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
+  lis     r28, 0xEF40
+  addi    r28, r28, 0x0004
+  stw     r31, 0x0C(r28)  /* clear PMM0PCIHA */
+  lis     r29, 0xFFF8     /* open 512 kByte */
+  addi    r29, r29, 0x0001/* and enable this region */
+  stwbrx  r29, r0, r28    /* write PMM0MA */
+
+  lis     r28, 0xEEC0     /* address of PCIC0_CFGADDR */
+  addi    r29, r28, 4     /* add 4 to r29 -> PCIC0_CFGDATA */
+
+  lis     r31, 0x8000     /* set en bit bus 0 */
+  ori     r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
+  stwbrx  r31, r0, r28    /* write it */
+
+  lwbrx   r31, r0, r29    /* load XBCS register */
+  oris    r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
+  stwbrx  r31, r0, r29    /* write back XBCS register */
+
+  nop
+  nop
+  b	_start		/* normal start */
+#endif
+
diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c
index 96e4df5..93d8679 100644
--- a/board/mpl/mip405/mip405.c
+++ b/board/mpl/mip405/mip405.c
@@ -73,7 +73,7 @@ extern block_dev_desc_t * scsi_get_dev(int dev);
 extern block_dev_desc_t * ide_get_dev(int dev);
 
 #undef SDRAM_DEBUG
-
+#define ENABLE_ECC /* for ecc boards */
 #define FALSE           0
 #define TRUE            1
 
@@ -108,7 +108,27 @@ typedef struct {
 	unsigned char sz;		/* log binary => Size = (4MByte<<sz) 5 = 128, 4 = 64, 3 = 32, 2 = 16, 1=8 */
 	unsigned char ecc;		/* if true, ecc is enabled */
 } sdram_t;
-
+#if defined(CONFIG_MIP405T)
+const sdram_t sdram_table[] = {
+	{ 0x01,	/* MIP405T Rev A, 64MByte -1 Board */
+		3,	/* Case Latenty = 3 */
+		3,	/* trp 20ns / 7.5 ns datain[27] */
+		3,	/* trcd 20ns /7.5 ns (datain[29]) */
+		6,	/* tras 44ns /7.5 ns  (datain[30]) */
+		4,	/* tcpt 44 - 20ns = 24ns */
+		3,	/* Address Mode = 3 (13x9x4) */
+		4,	/* size value (64MByte) */
+		0},	/* ECC disabled */
+	{ 0xff, /* terminator */
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff,
+	  0xff }
+};
+#else
 const sdram_t sdram_table[] = {
 	{ 0x0f,	/* Rev A, 128MByte -1 Board */
 		3,	/* Case Latenty = 3 */
@@ -155,7 +175,7 @@ const sdram_t sdram_table[] = {
 	  0xff,
 	  0xff }
 };
-
+#endif /*CONFIG_MIP405T */
 void SDRAM_err (const char *s)
 {
 #ifndef SDRAM_DEBUG
@@ -222,17 +242,54 @@ int init_sdram (void)
 			tctp_clocks;
 	unsigned char	cal_val;
 	unsigned char	bc;
-	unsigned long	pbcr, sdram_tim, sdram_bank;
-	unsigned long	*p;
+	unsigned long	sdram_tim, sdram_bank;
 
-	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);
+	/*i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);*/
 	(void) get_clocks ();
 	gd->baudrate = 9600;
 	serial_init ();
+	/* set up the pld */
+	mtdcr (ebccfga, pb7ap);
+	mtdcr (ebccfgd, PLD_AP);
+	mtdcr (ebccfga, pb7cr);
+	mtdcr (ebccfgd, PLD_CR);
+	/* THIS IS OBSOLETE */
+	/* set up the board rev reg*/
+	mtdcr (ebccfga, pb5ap);
+	mtdcr (ebccfgd, BOARD_AP);
+	mtdcr (ebccfga, pb5cr);
+	mtdcr (ebccfgd, BOARD_CR);
+#ifdef SDRAM_DEBUG
+	/* get all informations from PLD */
+	serial_puts ("\nPLD Part  0x");
+	bc = in8 (PLD_PART_REG);
+	write_hex (bc);
+	serial_puts ("\nPLD Vers  0x");
+	bc = in8 (PLD_VERS_REG);
+	write_hex (bc);
+	serial_puts ("\nBoard Rev 0x");
+	bc = in8 (PLD_BOARD_CFG_REG);
+	write_hex (bc);
+	serial_puts ("\n");
+#endif
+	/* check board */
+	bc = in8 (PLD_PART_REG);
+#if defined(CONFIG_MIP405T)
+	if((bc & 0x80)==0)
+		SDRAM_err ("U-Boot configured for a MIP405T not for a MIP405!!!\n");
+#else
+	if((bc & 0x80)==0x80)
+		SDRAM_err ("U-Boot configured for a MIP405 not for a MIP405T!!!\n");
+#endif
+#if !defined(CONFIG_MIP405T)
+	/* since the ECC initialisation needs some time,
+	 * we show that we're alive
+	 */
 	serial_puts ("\nInitializing SDRAM, Please stand by");
+	/* set-up the chipselect machine */
 	mtdcr (ebccfga, pb0cr);		/* get cs0 config reg */
-	pbcr = mfdcr (ebccfgd);
-	if ((pbcr & 0x00002000) == 0) {
+	tmp = mfdcr (ebccfgd);
+	if ((tmp & 0x00002000) == 0) {
 		/* MPS Boot, set up the flash */
 		mtdcr (ebccfga, pb1ap);
 		mtdcr (ebccfgd, FLASH_AP);
@@ -254,30 +311,8 @@ int init_sdram (void)
 	mtdcr (ebccfgd, UART1_AP);
 	mtdcr (ebccfga, pb3cr);
 	mtdcr (ebccfgd, UART1_CR);
-
-	/* set up the pld */
-	mtdcr (ebccfga, pb7ap);
-	mtdcr (ebccfgd, PLD_AP);
-	mtdcr (ebccfga, pb7cr);
-	mtdcr (ebccfgd, PLD_CR);
-	/* set up the board rev reg */
-	mtdcr (ebccfga, pb5ap);
-	mtdcr (ebccfgd, BOARD_AP);
-	mtdcr (ebccfga, pb5cr);
-	mtdcr (ebccfgd, BOARD_CR);
-
-
-#ifdef SDRAM_DEBUG
-	out8 (PER_BOARD_ADDR, 0);
-	bc = in8 (PER_BOARD_ADDR);
-	serial_puts ("\nBoard Rev: ");
-	write_hex (bc);
-	serial_puts (" (PLD=");
-	bc = in8 (PLD_BOARD_CFG_REG);
-	write_hex (bc);
-	serial_puts (")\n");
 #endif
-	bc = get_board_revcfg ();
+	bc = in8 (PLD_BOARD_CFG_REG);
 #ifdef SDRAM_DEBUG
 	serial_puts ("\nstart SDRAM Setup\n");
 	serial_puts ("\nBoard Rev: ");
@@ -367,9 +402,10 @@ int init_sdram (void)
 	mtdcr (memcfga, mem_rtr);
 	mtdcr (memcfgd, tmp);
 	/* enable ECC if used */
-#if 1
+#if defined(ENABLE_ECC) && !defined(CONFIG_BOOT_PCI)
 	if (sdram_table[i].ecc) {
 		/* disable checking for all banks */
+		unsigned long	*p;
 #ifdef SDRAM_DEBUG
 		serial_puts ("disable ECC.. ");
 #endif
@@ -398,8 +434,6 @@ int init_sdram (void)
 			*p++ = 0L;
 			if (!((unsigned long) p % 0x00800000))	/* every 8MByte */
 				serial_puts (".");
-
-
 		}
 		/* enable bank 0 */
 		serial_puts (".");
@@ -501,47 +535,69 @@ void ide_set_reset (int idereset)
 
 /* ------------------------------------------------------------------------- */
 
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
+void get_pcbrev_var(unsigned char *pcbrev, unsigned char *var)
 {
-	unsigned char s[50];
-	unsigned char bc, var, rc;
+#if !defined(CONFIG_MIP405T)
+	unsigned char bc,rc,tmp;
 	int i;
-	backup_t *b = (backup_t *) s;
 
-	puts ("Board: ");
-
-	bc = get_board_revcfg ();
-	var = ~bc;
-	var &= 0xf;
+	bc = in8 (PLD_BOARD_CFG_REG);
+	tmp = ~bc;
+	tmp &= 0xf;
 	rc = 0;
 	for (i = 0; i < 4; i++) {
 		rc <<= 1;
-		rc += (var & 0x1);
-		var >>= 1;
+		rc += (tmp & 0x1);
+		tmp >>= 1;
 	}
 	rc++;
 	if((((bc>>4) & 0xf)==0x1) /* Rev B PCB with */
 		&& (rc==0x1))     /* Population Option 1 is a -3 */
 		rc=3;
+	*pcbrev=(bc >> 4) & 0xf;
+	*var=rc;
+#else
+	unsigned char bc;
+	bc = in8 (PLD_BOARD_CFG_REG);
+	*pcbrev=(bc >> 4) & 0xf;
+	*var=bc & 0xf ;
+#endif
+}
+
+/*
+ * Check Board Identity:
+ */
+/* serial String: "MIP405_1000" OR "MIP405T_1000" */
+#if !defined(CONFIG_MIP405T)
+#define BOARD_NAME	"MIP405"
+#else
+#define BOARD_NAME	"MIP405T"
+#endif
+
+int checkboard (void)
+{
+	unsigned char s[50];
+	unsigned char bc, var;
+	int i;
+	backup_t *b = (backup_t *) s;
+
+	puts ("Board: ");
+	get_pcbrev_var(&bc,&var);
 	i = getenv_r ("serial#", s, 32);
-	if ((i == 0) || strncmp (s, "MIP405", 6)) {
+	if ((i == 0) || strncmp (s, BOARD_NAME,sizeof(BOARD_NAME))) {
 		get_backup_values (b);
 		if (strncmp (b->signature, "MPL\0", 4) != 0) {
-			puts ("### No HW ID - assuming MIP405");
-			printf ("-%d Rev %c", rc, 'A' + ((bc >> 4) & 0xf));
+			puts ("### No HW ID - assuming " BOARD_NAME);
+			printf ("-%d Rev %c", var, 'A' + bc);
 		} else {
-			b->serial_name[6] = 0;
-			printf ("%s-%d Rev %c SN: %s", b->serial_name, rc,
-					'A' + ((bc >> 4) & 0xf), &b->serial_name[7]);
+			b->serial_name[sizeof(BOARD_NAME)-1] = 0;
+			printf ("%s-%d Rev %c SN: %s", b->serial_name, var,
+					'A' + bc, &b->serial_name[sizeof(BOARD_NAME)]);
 		}
 	} else {
-		s[6] = 0;
-		printf ("%s-%d Rev %c SN: %s", s, rc, 'A' + ((bc >> 4) & 0xf),
-				&s[7]);
+		s[sizeof(BOARD_NAME)-1] = 0;
+		printf ("%s-%d Rev %c SN: %s", s, var,'A' + bc,
+				&s[sizeof(BOARD_NAME)]);
 	}
 	bc = in8 (PLD_EXT_CONF_REG);
 	printf (" Boot Config: 0x%x\n", bc);
@@ -613,30 +669,23 @@ static int test_dram (unsigned long ramsize)
 
 int misc_init_r (void)
 {
+	/* if MIP405 has booted from PCI, reset CCR0[24] as described in errata PCI_18 */
+	if (mfdcr(strap) & PSR_ROM_LOC)
+	       mtspr(ccr0, (mfspr(ccr0) & ~0x80));
+
 	return (0);
 }
 
 
 void print_mip405_rev (void)
 {
-	unsigned char part, vers, cfg, rev;
-
-	cfg = get_board_revcfg ();
-	vers = cfg;
-	vers &= 0xf;
-	rev = (((vers & 0x1) ? 0x8 : 0) |
-		   ((vers & 0x2) ? 0x4 : 0) |
-		   ((vers & 0x4) ? 0x2 : 0) |
-		   ((vers & 0x8) ? 0x1 : 0));
-
-	vers=16-rev;
-	rev=vers;
-	if((rev==1) && ((cfg >> 4)==1)) /* Rev B PCB and -1 is a -3 */
-		rev=3;
+	unsigned char part, vers, pcbrev, var;
+
+	get_pcbrev_var(&pcbrev,&var);
 	part = in8 (PLD_PART_REG);
 	vers = in8 (PLD_VERS_REG);
-	printf ("Rev:   MIP405-%d Rev %c PLD%d Vers %d\n",
-			rev, ((cfg >> 4) & 0xf) + 'A', part, vers);
+	printf ("Rev:   " BOARD_NAME "-%d Rev %c PLD %d Vers %d\n",
+			var, pcbrev + 'A', part & 0x7F, vers);
 }
 
 extern void mem_test_reloc(void);
@@ -683,24 +732,32 @@ void print_mip405_info (void)
 	com_mode = in8 (PLD_COM_MODE_REG);
 	ext = in8 (PLD_EXT_CONF_REG);
 
-	printf ("PLD Part %d version %d\n", part, vers);
+	printf ("PLD Part %d version %d\n", part & 0x7F, vers);
 	printf ("Board Revision %c\n", ((cfg >> 4) & 0xf) + 'A');
 	printf ("Population Options %d %d %d %d\n", (cfg) & 0x1,
 			(cfg >> 1) & 0x1, (cfg >> 2) & 0x1, (cfg >> 3) & 0x1);
 	printf ("User LED %s\n", (com_mode & 0x4) ? "on" : "off");
 	printf ("UART Clocks %d\n", (com_mode >> 4) & 0x3);
-	printf ("Test ist %x\n", com_mode);
+#if !defined(CONFIG_MIP405T)
 	printf ("User Config Switch %d %d %d %d %d %d %d %d\n",
 			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
 			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
 			(ext >> 6) & 0x1, (ext >> 7) & 0x1);
 	printf ("SER1 uses handshakes %s\n",
 			(ext & 0x80) ? "DTR/DSR" : "RTS/CTS");
+#else
+	printf ("User Config Switch %d %d %d %d %d %d %d %d %d\n",
+			(ext) & 0x1, (ext >> 1) & 0x1, (ext >> 2) & 0x1,
+			(ext >> 3) & 0x1, (ext >> 4) & 0x1, (ext >> 5) & 0x1,
+			(ext >> 6) & 0x1,(ext >> 7) & 0x1,(ext >> 8) & 0x1);
+#endif
 	printf ("IDE Reset %s\n", (ext & 0x01) ? "asserted" : "not asserted");
 	printf ("IRQs:\n");
 	printf ("  PIIX INTR: %s\n", (irq_reg & 0x80) ? "inactive" : "active");
+#if !defined(CONFIG_MIP405T)
 	printf ("  UART0 IRQ: %s\n", (irq_reg & 0x40) ? "inactive" : "active");
 	printf ("  UART1 IRQ: %s\n", (irq_reg & 0x20) ? "inactive" : "active");
+#endif
 	printf ("  PIIX SMI:  %s\n", (irq_reg & 0x10) ? "inactive" : "active");
 	printf ("  PIIX INIT: %s\n", (irq_reg & 0x8) ? "inactive" : "active");
 	printf ("  PIIX NMI:  %s\n", (irq_reg & 0x4) ? "inactive" : "active");
diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds
index 8ce0057..d2efd6d 100644
--- a/board/mpl/mip405/u-boot.lds
+++ b/board/mpl/mip405/u-boot.lds
@@ -31,6 +31,10 @@ SECTIONS
   {
     *(.resetvec)
   } = 0xffff
+  .bootpg 0xFFFFF000 :
+  {
+    board/mpl/mip405/init.o	(.bootpg)
+  } = 0xffff
 
   /* Read-only sections, merged into text segment: */
   . = + SIZEOF_HEADERS;
diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c
index 7289523..82142a2 100644
--- a/cpu/ppc4xx/405gp_pci.c
+++ b/cpu/ppc4xx/405gp_pci.c
@@ -177,7 +177,7 @@ void pci_405gp_init(struct pci_controller *hose)
 	 * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
 	 * Use byte reversed out routines to handle endianess.
 	 *--------------------------------------------------------------------------*/
-	out32r(PMM0MA,    pmmma[0]);          /* ensure disabled b4 setting PMM0LA */
+	out32r(PMM0MA,    (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
 	out32r(PMM0LA,    pmmla[0]);
 	out32r(PMM0PCILA, pmmpcila[0]);
 	out32r(PMM0PCIHA, pmmpciha[0]);
@@ -186,7 +186,7 @@ void pci_405gp_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * PMM1 is not used.  Initialize them to zero.
 	 *--------------------------------------------------------------------------*/
-	out32r(PMM1MA,    pmmma[1]);          /* ensure disabled b4 setting PMM2LA */
+	out32r(PMM1MA,    (pmmma[1]&~0x1));
 	out32r(PMM1LA,    pmmla[1]);
 	out32r(PMM1PCILA, pmmpcila[1]);
 	out32r(PMM1PCIHA, pmmpciha[1]);
@@ -195,7 +195,7 @@ void pci_405gp_init(struct pci_controller *hose)
 	/*--------------------------------------------------------------------------+
 	 * PMM2 is not used.  Initialize them to zero.
 	 *--------------------------------------------------------------------------*/
-	out32r(PMM2MA,    pmmma[2]);          /* ensure disabled b4 setting PMM2LA */
+	out32r(PMM2MA,    (pmmma[2]&~0x1)); 
 	out32r(PMM2LA,    pmmla[2]);
 	out32r(PMM2PCILA, pmmpcila[2]);
 	out32r(PMM2PCIHA, pmmpciha[2]);
diff --git a/cpu/ppc4xx/resetvec.S b/cpu/ppc4xx/resetvec.S
index 5350225..e058bf0 100644
--- a/cpu/ppc4xx/resetvec.S
+++ b/cpu/ppc4xx/resetvec.S
@@ -1,10 +1,13 @@
 /* Copyright MontaVista Software Incorporated, 2000 */
-
-
+#include <config.h>
 	.section .resetvec,"ax"
 #if defined(CONFIG_440)
 	b _start_440
 #else
+#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
+	b _start_pci
+#else
 	b _start
 #endif
+#endif
 
diff --git a/include/configs/MIP405.h b/include/configs/MIP405.h
index ec32a1e..b29eb8b 100644
--- a/include/configs/MIP405.h
+++ b/include/configs/MIP405.h
@@ -36,6 +36,16 @@
 #define CONFIG_4xx		1	/* ...member of PPC4xx family	*/
 #define CONFIG_MIP405		1	/* ...on a MIP405 board		*/
 /***********************************************************
+ * Note that it may also be a MIP405T board which is a subset of the
+ * MIP405
+ ***********************************************************/
+/***********************************************************
+ * WARNING:
+ * CONFIG_BOOT_PCI is only used for first boot-up and should
+ * NOT be enabled for production bootloader
+ ***********************************************************/
+/*#define        CONFIG_BOOT_PCI         1*/       
+/***********************************************************
  * Clock
  ***********************************************************/
 #define CONFIG_SYS_CLK_FREQ	33000000 /* external frequency to pll   */
@@ -43,7 +53,7 @@
 /***********************************************************
  * Command definitions
  ***********************************************************/
-#define CONFIG_COMMANDS		\
+#define MIP405_COMMON_CMDS \
 		       (CONFIG_CMD_DFL	| \
 			CFG_CMD_IDE	| \
 			CFG_CMD_DHCP	| \
@@ -56,12 +66,21 @@
 			CFG_CMD_REGINFO | \
 			CFG_CMD_DATE	| \
 			CFG_CMD_ELF	| \
-			CFG_CMD_USB	| \
 			CFG_CMD_MII	| \
-			CFG_CMD_DOC	| \
 			CFG_CMD_SAVES	| \
 			CFG_CMD_BSP	)
 
+#if defined(CONFIG_MIP405T)
+#define CONFIG_COMMANDS		\
+			MIP405_COMMON_CMDS
+#else
+#define CONFIG_COMMANDS		\
+			(MIP405_COMMON_CMDS | \
+			CFG_CMD_USB	| \
+			CFG_CMD_DOC	)
+
+#endif
+
 /* this must be included AFTER the definition of CONFIG_COMMANDS  (if any) */
 #include <cmd_confdefs.h>
 
@@ -97,9 +116,9 @@
  * Definitions for Serial Presence Detect EEPROM address
  * (to get SDRAM settings)
  ***************************************************************/
-#define SDRAM_EEPROM_WRITE_ADDRESS	0xA0
+/*#define SDRAM_EEPROM_WRITE_ADDRESS	0xA0
 #define SDRAM_EEPROM_READ_ADDRESS 	0xA1
-
+*/
 /**************************************************************
  * Environment definitions
  **************************************************************/
@@ -287,7 +306,12 @@
 /************************************************************
  * IDE/ATA stuff
  ************************************************************/
+#if defined(CONFIG_MIP405T)
+#define CFG_IDE_MAXBUS		1   /* MIP405T has only one IDE bus	*/
+#else
 #define CFG_IDE_MAXBUS		2   /* max. 2 IDE busses	*/
+#endif
+
 #define CFG_IDE_MAXDEVICE	(CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
 
 #define CFG_ATA_BASE_ADDR	CFG_ISA_IO_BASE_ADDRESS /* base address */
@@ -351,13 +375,14 @@
 /************************************************************
  * USB support EXPERIMENTAL
  ************************************************************/
+#if !defined(CONFIG_MIP405T)
 #define CONFIG_USB_UHCI
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_USB_STORAGE
 
 /* Enable needed helper functions */
 #define CFG_DEVICE_DEREGISTER		/* needs device_deregister */
-
+#endif
 /************************************************************
  * Debug support
  ************************************************************/
@@ -369,8 +394,19 @@
 /************************************************************
  * Ident
  ************************************************************/
+
 #define VERSION_TAG "released"
-#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, MEV-10072-001 " VERSION_TAG
+#if !defined(CONFIG_MIP405T)
+#define CONFIG_ISO_STRING "MEV-10072-001"
+#else
+#define CONFIG_ISO_STRING "MEV-10082-001"
+#endif
+
+#if !defined(CONFIG_BOOT_PCI)
+#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
+#else
+#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version"
+#endif
 
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 5ecb537..8fbbe30 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -368,7 +368,8 @@
  * Ident
  ************************************************************/
 #define VERSION_TAG "released"
-#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, MEV-10066-001 " VERSION_TAG
+#define CONFIG_ISO_STRING "MEV-10066-001"
+#define CONFIG_IDENT_STRING "\n(c) 2002 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
 
 
 #endif	/* __CONFIG_H */