diff options
author | Matthias Fuchs <matthias.fuchs@esd-electronics.com> | 2008-10-28 13:37:00 +0100 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2008-10-31 10:38:30 +0100 |
commit | be270798900b75ad9c47c7b79c72f70441196c56 (patch) | |
tree | 1771ed1e1752db5d02fde1763a87450f5e28c7bb /board/esd | |
parent | 75183b1a7fc04206d9779d13f16e03853d7e965d (diff) | |
download | bootable_bootloader_goldelico_gta04-be270798900b75ad9c47c7b79c72f70441196c56.zip bootable_bootloader_goldelico_gta04-be270798900b75ad9c47c7b79c72f70441196c56.tar.gz bootable_bootloader_goldelico_gta04-be270798900b75ad9c47c7b79c72f70441196c56.tar.bz2 |
ppc4xx: Update PMC440 board support
This patch brings PMC440 board support up to date:
- fix GPIO configuration
- add misc_init_f()
- use better values for usbact variable
- fix USB 2.0 phy reset sequence
- shrink BAR2 to save PCI address space
- add FDT support
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/esd')
-rw-r--r-- | board/esd/pmc440/pmc440.c | 128 |
1 files changed, 106 insertions, 22 deletions
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index 013815e..8563d7d 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2008 + * (Cg) Copyright 2007-2008 * Matthias Fuchs, esd gmbh, matthias.fuchs@esd-electronics.com. * Based on board/amcc/sequoia/sequoia.c * @@ -45,9 +45,11 @@ DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ +extern void __ft_board_setup(void *blob, bd_t *bd); ulong flash_get_size(ulong base, int banknum); int pci_is_66mhz(void); +int is_monarch(void); int bootstrap_eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); @@ -107,9 +109,9 @@ int board_early_init_f(void) */ out32(GPIO0_OR, 0x40000002); out32(GPIO0_TCR, 0x4c90011f); - out32(GPIO0_OSRL, 0x28011400); + out32(GPIO0_OSRL, 0x28051400); out32(GPIO0_OSRH, 0x55005000); - out32(GPIO0_TSRL, 0x08011400); + out32(GPIO0_TSRL, 0x08051400); out32(GPIO0_TSRH, 0x55005000); out32(GPIO0_ISR1L, 0x54000000); out32(GPIO0_ISR1H, 0x00000000); @@ -196,6 +198,23 @@ int board_early_init_f(void) return 0; } +#if defined(CONFIG_MISC_INIT_F) +int misc_init_f(void) +{ + struct pci_controller hose; + hose.first_busno = 0; + hose.last_busno = 0; + hose.region_count = 0; + + if (getenv("pciearly") && (!is_monarch())) { + printf("PCI: early target init\n"); + pci_setup_indirect(&hose, PCIX0_CFGADR, PCIX0_CFGDATA); + pci_target_init(&hose); + } + return 0; +} +#endif + /* * misc_init_r. */ @@ -207,6 +226,7 @@ int misc_init_r(void) unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; unsigned long sdr0_pfc1; + unsigned long sdr0_srst0, sdr0_srst1; char *act = getenv("usbact"); /* @@ -256,7 +276,7 @@ int misc_init_r(void) /* * USB suff... */ - if ((act == NULL || strcmp(act, "hostdev") == 0) && + if ((act == NULL || strcmp(act, "host") == 0) && !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)){ /* SDR Setting */ mfsdr(SDR0_PFC1, sdr0_pfc1); @@ -290,12 +310,46 @@ int misc_init_r(void) mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); mtsdr(SDR0_USB2H0CR, usb2h0cr); - /* clear resets */ + /* + * Take USB out of reset: + * -Initial status = all cores are in reset + * -deassert reset to OPB1, P4OPB0, OPB2, PLB42OPB1 OPB2PLB40 cores + * -wait 1 ms + * -deassert reset to PHY + * -wait 1 ms + * -deassert reset to HOST + * -wait 4 ms + * -deassert all other resets + */ + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~(SDR0_SRST1_OPBA1 | \ + SDR0_SRST1_P4OPB0 | \ + SDR0_SRST1_OPBA2 | \ + SDR0_SRST1_PLB42OPB1 | \ + SDR0_SRST1_OPB2PLB40); + mtsdr(SDR0_SRST1, sdr0_srst1); + udelay(1000); + + mfsdr(SDR0_SRST1, sdr0_srst1); + sdr0_srst1 &= ~SDR0_SRST1_USB20PHY; + mtsdr(SDR0_SRST1, sdr0_srst1); udelay(1000); + + mfsdr(SDR0_SRST0, sdr0_srst0); + sdr0_srst0 &= ~SDR0_SRST0_USB2H; + mtsdr(SDR0_SRST0, sdr0_srst0); + udelay(4000); + + /* finally all the other resets */ mtsdr(SDR0_SRST1, 0x00000000); - udelay(1000); mtsdr(SDR0_SRST0, 0x00000000); + if (!(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) { + /* enable power on USB socket */ + out_be32((void*)GPIO1_OR, + in_be32((void*)GPIO1_OR) & ~GPIO1_USB_PWR_N); + } + printf("USB: Host\n"); } else if ((strcmp(act, "dev") == 0) || @@ -547,14 +601,14 @@ void pci_target_init(struct pci_controller *hose) out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); } else { - /* BAR2: default: 16 MB FPGA + registers */ - out32r(PCIX0_PTM2MS, 0xff000001); /* Memory Size/Attribute */ + /* BAR2: default: 4MB FPGA */ + out32r(PCIX0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */ out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ } if (is_monarch()) { /* BAR2: map FPGA registers behind system memory at 1GB */ - pci_write_config_dword(0, PCI_BASE_ADDRESS_2, 0x40000008); + pci_hose_write_config_dword(hose, 0, PCI_BASE_ADDRESS_2, 0x40000008); } /* @@ -562,8 +616,8 @@ void pci_target_init(struct pci_controller *hose) */ /* Program the board's vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); + pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_VENDOR_ID, + CONFIG_SYS_PCI_SUBSYS_VENDORID); /* disabled for PMC405 backward compatibility */ /* Configure command register as bus master */ @@ -571,19 +625,19 @@ void pci_target_init(struct pci_controller *hose) /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + pci_hose_write_config_word(hose, 0, PCI_LATENCY_TIMER, 1); /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); + pci_hose_write_config_word(hose, 0, PCI_ERREN, 0); pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); if (!is_monarch()) { /* Program the board's subsystem id/classcode */ - pci_write_config_word(0, PCI_SUBSYSTEM_ID, - CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH); - pci_write_config_word(0, PCI_CLASS_SUB_CODE, - CONFIG_SYS_PCI_CLASSCODE_NONMONARCH); + pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID, + CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH); + pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE, + CONFIG_SYS_PCI_CLASSCODE_NONMONARCH); /* PCI configuration done: release ERREADY */ out_be32((void*)GPIO1_OR, @@ -592,11 +646,14 @@ void pci_target_init(struct pci_controller *hose) in_be32((void*)GPIO1_TCR) | GPIO1_PPC_EREADY); } else { /* Program the board's subsystem id/classcode */ - pci_write_config_word(0, PCI_SUBSYSTEM_ID, - CONFIG_SYS_PCI_SUBSYS_ID_MONARCH); - pci_write_config_word(0, PCI_CLASS_SUB_CODE, - CONFIG_SYS_PCI_CLASSCODE_MONARCH); + pci_hose_write_config_word(hose, 0, PCI_SUBSYSTEM_ID, + CONFIG_SYS_PCI_SUBSYS_ID_MONARCH); + pci_hose_write_config_word(hose, 0, PCI_CLASS_SUB_CODE, + CONFIG_SYS_PCI_CLASSCODE_MONARCH); } + + /* enable host configuration */ + pci_hose_write_config_dword(hose, 0, PCI_BRDGOPT2, 0x00000101); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ @@ -626,6 +683,12 @@ static void wait_for_pci_ready(void) { int i; char *s = getenv("pcidelay"); + /* + * We have our own handling of the pcidelay variable. + * Using CONFIG_PCI_BOOTDELAY enables pausing for host + * and adapter devices. For adapter devices we do not + * want this. + */ if (s) { int ms = simple_strtoul(s, NULL, 10); printf("PCI: Waiting for %d ms\n", ms); @@ -851,7 +914,7 @@ int usb_board_init(void) char *act = getenv("usbact"); int i; - if ((act == NULL || strcmp(act, "hostdev") == 0) && + if ((act == NULL || strcmp(act, "host") == 0) && !(in_be32((void*)GPIO0_IR) & GPIO0_USB_PRSNT)) /* enable power on USB socket */ out_be32((void*)GPIO1_OR, @@ -876,3 +939,24 @@ int usb_board_init_fail(void) return 0; } #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_BOARD_INIT) */ + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + int rc; + + __ft_board_setup(blob, bd); + + /* + * Disable PCI in non-monarch mode. + */ + if (!is_monarch()) { + rc = fdt_find_and_setprop(blob, "/plb/pci@1ec000000", "status", + "disabled", sizeof("disabled"), 1); + if (rc) { + printf("Unable to update property status in PCI node, err=%s\n", + fdt_strerror(rc)); + } + } +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ |