diff options
author | wdenk <wdenk> | 2003-03-06 00:02:04 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2003-03-06 00:02:04 +0000 |
commit | 43d9616cffb4a130e1620e3e33fc9bc1bcabe399 (patch) | |
tree | ed55479a108ed16258d81be3e37d0edd74520520 /board/innokom | |
parent | 6069ff265362ef6239749b5f598b137f407b821e (diff) | |
download | bootable_bootloader_goldelico_gta04-43d9616cffb4a130e1620e3e33fc9bc1bcabe399.zip bootable_bootloader_goldelico_gta04-43d9616cffb4a130e1620e3e33fc9bc1bcabe399.tar.gz bootable_bootloader_goldelico_gta04-43d9616cffb4a130e1620e3e33fc9bc1bcabe399.tar.bz2 |
* Patch by Robert Schwebel, 21 Jan 2003:
- Add support for Innokom board
- Don't complain if "install" fails
- README cleanup (remove duplicated lines)
- Update PXA header files
* Add documentation for existing POST code (doc/README.POST)
* Patch by Laudney Ren, 15 Jan 2003:
Fix handling of redundand environment in "tools/envcrc.c"
* Patch by Detlev Zundel, 28 Feb 2003:
Add bedbug support for 824x systems
* Add support for 16 MB flash configuration of TRAB board
* Patch by Erwin Rol, 27 Feb 2003:
Add support for RTEMS
* Add image information to README
* Fix dual PCMCIA slot support (when running with just one
slot populated)
* Add VFD type detection to trab board
* extend drivers/cs8900.c driver to synchronize ethaddr environment
variable with value in the EEPROM
Diffstat (limited to 'board/innokom')
-rw-r--r-- | board/innokom/Makefile | 47 | ||||
-rw-r--r-- | board/innokom/config.mk | 16 | ||||
-rw-r--r-- | board/innokom/flash.c | 377 | ||||
-rw-r--r-- | board/innokom/innokom.c | 139 | ||||
-rw-r--r-- | board/innokom/memsetup.S | 429 | ||||
-rw-r--r-- | board/innokom/u-boot.lds | 53 |
6 files changed, 1061 insertions, 0 deletions
diff --git a/board/innokom/Makefile b/board/innokom/Makefile new file mode 100644 index 0000000..7fbe76b --- /dev/null +++ b/board/innokom/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := innokom.o flash.o +SOBJS := memsetup.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/innokom/config.mk b/board/innokom/config.mk new file mode 100644 index 0000000..939ffff --- /dev/null +++ b/board/innokom/config.mk @@ -0,0 +1,16 @@ +# +# Linux-Kernel is expected to be at c000'8000, entry c000'8000 +# +# we load ourself to c170'0000, the upper 1 MB of second bank +# +# download areas is c800'0000 +# + +# This is the address where U-Boot lives in flash: +#TEXT_BASE = 0 + +# FIXME: armboot does only work correctly when being compiled +# for the addresses _after_ relocation to RAM!! Otherwhise the +# .bss segment is assumed in flash... +TEXT_BASE = 0xa1fe0000 + diff --git a/board/innokom/flash.c b/board/innokom/flash.c new file mode 100644 index 0000000..b8e97e1 --- /dev/null +++ b/board/innokom/flash.c @@ -0,0 +1,377 @@ +/* + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/pxa-regs.h> + +#define FLASH_BANK_SIZE 0x02000000 +#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */ + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + + +/** + * flash_init: - initialize data structures for flash chips + * + * @return: size of the flash + */ + +ulong flash_init(void) +{ + int i, j; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + ulong flashbase = 0; + flash_info[i].flash_id = + (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F128J3 & FLASH_TYPEMASK); + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + + switch (i) { + case 0: + flashbase = PHYS_FLASH_1; + break; + default: + panic("configured to many flash banks!\n"); + break; + } + for (j = 0; j < flash_info[i].sector_count; j++) { + flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors */ + flash_protect(FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + _armboot_end_data - _armboot_start, + &flash_info[0]); + +#ifdef CFG_ENV_IS_IN_FLASH + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); +#endif + + return size; +} + + +/** + * flash_print_info: - print information about the flash situation + * + * @param info: + */ + +void flash_print_info (flash_info_t *info) +{ + int i, j; + + for (j=0; j<CFG_MAX_FLASH_BANKS; j++) { + + switch (info->flash_id & FLASH_VENDMASK) { + + case (INTEL_MANUFACT & FLASH_VENDMASK): + printf("Intel: "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + + case (INTEL_ID_28F128J3 & FLASH_TYPEMASK): + printf("28F128J3 (128Mbit)\n"); + break; + default: + printf("Unknown Chip Type\n"); + return; + } + + printf(" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) printf ("\n "); + + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + info++; + } +} + + +/** + * flash_erase: - erase flash sectors + * + */ + +int flash_erase(flash_info_t *info, int s_first, int s_last) +{ + int flag, prot, sect; + int rc = ERR_OK; + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) { + return ERR_INVAL; + } + + if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) + return ERR_UNKNOWN_FLASH_VENDOR; + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) prot++; + } + + if (prot) return ERR_PROTECTED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { + + printf("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + + if (info->protect[sect] == 0) { /* not protected */ + u32 * volatile addr = (u32 * volatile)(info->start[sect]); + + /* erase sector: */ + /* The strata flashs are aligned side by side on */ + /* the data bus, so we have to write the commands */ + /* to both chips here: */ + + *addr = 0x00200020; /* erase setup */ + *addr = 0x00D000D0; /* erase confirm */ + + while ((*addr & 0x00800080) != 0x00800080) { + if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) { + *addr = 0x00B000B0; /* suspend erase*/ + *addr = 0x00FF00FF; /* read mode */ + rc = ERR_TIMOUT; + goto outahere; + } + } + + *addr = 0x00500050; /* clear status register cmd. */ + *addr = 0x00FF00FF; /* resest to read mode */ + + } + + printf("ok.\n"); + } + + if (ctrlc()) printf("User Interrupt!\n"); + + outahere: + + /* allow flash to settle - wait 10 ms */ + udelay_masked(10000); + + if (flag) enable_interrupts(); + + return rc; +} + + +/** + * write_word: - copy memory to flash + * + * @param info: + * @param dest: + * @param data: + * @return: + */ + +static int write_word (flash_info_t *info, ulong dest, ushort data) +{ + ushort *addr = (ushort *)dest, val; + int rc = ERR_OK; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) return ERR_NOT_ERASED; + + /* + * Disable interrupts which might cause a timeout + * here. Remember that our exception vectors are + * at address 0 in the flash, and we don't want a + * (ticker) exception to happen while the flash + * chip is in programming mode. + */ + flag = disable_interrupts(); + + /* clear status register command */ + *addr = 0x50; + + /* program set-up command */ + *addr = 0x40; + + /* latch address/data */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked(); + + /* wait while polling the status register */ + while(((val = *addr) & 0x80) != 0x80) { + if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) { + rc = ERR_TIMOUT; + *addr = 0xB0; /* suspend program command */ + goto outahere; + } + } + + if(val & 0x1A) { /* check for error */ + printf("\nFlash write error %02x at address %08lx\n", + (int)val, (unsigned long)dest); + if(val & (1<<3)) { + printf("Voltage range error.\n"); + rc = ERR_PROG_ERROR; + goto outahere; + } + if(val & (1<<1)) { + printf("Device protect error.\n"); + rc = ERR_PROTECTED; + goto outahere; + } + if(val & (1<<4)) { + printf("Programming error.\n"); + rc = ERR_PROG_ERROR; + goto outahere; + } + rc = ERR_PROG_ERROR; + goto outahere; + } + + outahere: + + *addr = 0xFF; /* read array command */ + if (flag) enable_interrupts(); + + return rc; +} + + +/** + * write_buf: - Copy memory to flash. + * + * @param info: + * @param src: source of copy transaction + * @param addr: where to copy to + * @param cnt: number of bytes to copy + * + * @return error code + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp; + ushort data; + int l; + int i, rc; + + wp = (addr & ~1); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i<l; ++i, ++cp) { + data = (data >> 8) | (*(uchar *)cp << 8); + } + for (; i<2 && cnt>0; ++i) { + data = (data >> 8) | (*src++ << 8); + --cnt; + ++cp; + } + for (; cnt==0 && i<2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *)cp << 8); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 2; + } + + /* + * handle word aligned part + */ + while (cnt >= 2) { + /* data = *((vushort*)src); */ + data = *((ushort*)src); + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + src += 2; + wp += 2; + cnt -= 2; + } + + if (cnt == 0) return ERR_OK; + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 8); + --cnt; + } + for (; i<2; ++i, ++cp) { + data = (data >> 8) | (*(uchar *)cp << 8); + } + + return write_word(info, wp, data); +} + diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c new file mode 100644 index 0000000..7d2702f --- /dev/null +++ b/board/innokom/innokom.c @@ -0,0 +1,139 @@ +/* + * (C) Copyright 2002 + * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de + * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net + * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/pxa-regs.h> + +#ifdef CONFIG_SHOW_BOOT_PROGRESS +# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) +#else +# define SHOW_BOOT_PROGRESS(arg) +#endif + +/* + * Miscelaneous platform dependent initialisations + */ + + +/** + * board_init: - setup some data structures + * + * @return: 0 in case of success + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* memory and cpu-speed are setup before relocation */ + /* so we do _nothing_ here */ + + /* arch number of Innokom board */ + gd->bd->bi_arch_number = 258; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0xa0000100; + + return 0; +} + + +/** + * dram_init: - setup dynamic RAM + * + * @return: 0 in case of success + */ + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + + +/** + * innokom_set_led: - switch LEDs on or off + * + * @param led: LED to switch (0,1,2) + * @param state: switch on (1) or off (0) + */ + +void innokom_set_led(int led, int state) +{ + switch(led) { +/* + case 0: if (state==1) { + GPCR0 |= CSB226_USER_LED0; + } else if (state==0) { + GPSR0 |= CSB226_USER_LED0; + } + break; + + case 1: if (state==1) { + GPCR0 |= CSB226_USER_LED1; + } else if (state==0) { + GPSR0 |= CSB226_USER_LED1; + } + break; + + case 2: if (state==1) { + GPCR0 |= CSB226_USER_LED2; + } else if (state==0) { + GPSR0 |= CSB226_USER_LED2; + } + break; +*/ + } + + return; +} + + +/** + * show_boot_progress: - indicate state of the boot process + * + * @param status: Status number - see README for details. + * + * The CSB226 does only have 3 LEDs, so we switch them on at the most + * important states (1, 5, 15). + */ + +void show_boot_progress (int status) +{ + switch(status) { +/* + case 1: csb226_set_led(0,1); break; + case 5: csb226_set_led(1,1); break; + case 15: csb226_set_led(2,1); break; +*/ + } + + return; +} + diff --git a/board/innokom/memsetup.S b/board/innokom/memsetup.S new file mode 100644 index 0000000..f7d5eee --- /dev/null +++ b/board/innokom/memsetup.S @@ -0,0 +1,429 @@ +/* + * Most of this taken from Redboot hal_platform_setup.h with cleanup + * + * NOTE: I haven't clean this up considerably, just enough to get it + * running. See hal_platform_setup.h for the source. See + * board/cradle/memsetup.S for another PXA250 setup that is + * much cleaner. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/pxa-regs.h> + +DRAM_SIZE: .long CFG_DRAM_SIZE + +/* wait for coprocessor write complete */ + .macro CPWAIT reg + mrc p15,0,\reg,c2,c0,0 + mov \reg,\reg + sub pc,pc,#4 + .endm + + +/* + * Memory setup + */ + +.globl memsetup +memsetup: + + mov r10, lr + + /* Set up GPIO pins first ----------------------------------------- */ + + ldr r0, =GPSR0 + ldr r1, =CFG_GPSR0_VAL + str r1, [r0] + + ldr r0, =GPSR1 + ldr r1, =CFG_GPSR1_VAL + str r1, [r0] + + ldr r0, =GPSR2 + ldr r1, =CFG_GPSR2_VAL + str r1, [r0] + + ldr r0, =GPCR0 + ldr r1, =CFG_GPCR0_VAL + str r1, [r0] + + ldr r0, =GPCR1 + ldr r1, =CFG_GPCR1_VAL + str r1, [r0] + + ldr r0, =GPCR2 + ldr r1, =CFG_GPCR2_VAL + str r1, [r0] + + ldr r0, =GPDR0 + ldr r1, =CFG_GPDR0_VAL + str r1, [r0] + + ldr r0, =GPDR1 + ldr r1, =CFG_GPDR1_VAL + str r1, [r0] + + ldr r0, =GPDR2 + ldr r1, =CFG_GPDR2_VAL + str r1, [r0] + + ldr r0, =GAFR0_L + ldr r1, =CFG_GAFR0_L_VAL + str r1, [r0] + + ldr r0, =GAFR0_U + ldr r1, =CFG_GAFR0_U_VAL + str r1, [r0] + + ldr r0, =GAFR1_L + ldr r1, =CFG_GAFR1_L_VAL + str r1, [r0] + + ldr r0, =GAFR1_U + ldr r1, =CFG_GAFR1_U_VAL + str r1, [r0] + + ldr r0, =GAFR2_L + ldr r1, =CFG_GAFR2_L_VAL + str r1, [r0] + + ldr r0, =GAFR2_U + ldr r1, =CFG_GAFR2_U_VAL + str r1, [r0] + + ldr r0, =PSSR /* enable GPIO pins */ + ldr r1, =CFG_PSSR_VAL + str r1, [r0] + +/* ldr r3, =MSC1 / low - bank 2 Lubbock Registers / SRAM */ +/* ldr r2, =CFG_MSC1_VAL / high - bank 3 Ethernet Controller */ +/* str r2, [r3] / need to set MSC1 before trying to write to the HEX LEDs */ +/* ldr r2, [r3] / need to read it back to make sure the value latches (see MSC section of manual) */ +/* */ +/* ldr r1, =LED_BLANK */ +/* mov r0, #0xFF */ +/* str r0, [r1] / turn on hex leds */ +/* */ +/*loop: */ +/* */ +/* ldr r0, =0xB0070001 */ +/* ldr r1, =_LED */ +/* str r0, [r1] / hex display */ + + + /* ---------------------------------------------------------------- */ + /* Enable memory interface */ + /* */ + /* The sequence below is based on the recommended init steps */ + /* detailed in the Intel PXA250 Operating Systems Developers Guide, */ + /* Chapter 10. */ + /* ---------------------------------------------------------------- */ + + /* ---------------------------------------------------------------- */ + /* Step 1: Wait for at least 200 microsedonds to allow internal */ + /* clocks to settle. Only necessary after hard reset... */ + /* FIXME: can be optimized later */ + /* ---------------------------------------------------------------- */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + +mem_init: + + ldr r1, =MEMC_BASE /* get memory controller base addr. */ + + /* ---------------------------------------------------------------- */ + /* Step 2a: Initialize Asynchronous static memory controller */ + /* ---------------------------------------------------------------- */ + + /* MSC registers: timing, bus width, mem type */ + + /* MSC0: nCS(0,1) */ + ldr r2, =CFG_MSC0_VAL + str r2, [r1, #MSC0_OFFSET] + ldr r2, [r1, #MSC0_OFFSET] /* read back to ensure */ + /* that data latches */ + /* MSC1: nCS(2,3) */ + ldr r2, =CFG_MSC1_VAL + str r2, [r1, #MSC1_OFFSET] + ldr r2, [r1, #MSC1_OFFSET] + + /* MSC2: nCS(4,5) */ + ldr r2, =CFG_MSC2_VAL + str r2, [r1, #MSC2_OFFSET] + ldr r2, [r1, #MSC2_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2b: Initialize Card Interface */ + /* ---------------------------------------------------------------- */ + + /* MECR: Memory Expansion Card Register */ + ldr r2, =CFG_MECR_VAL + str r2, [r1, #MECR_OFFSET] + ldr r2, [r1, #MECR_OFFSET] + + /* MCMEM0: Card Interface slot 0 timing */ + ldr r2, =CFG_MCMEM0_VAL + str r2, [r1, #MCMEM0_OFFSET] + ldr r2, [r1, #MCMEM0_OFFSET] + + /* MCMEM1: Card Interface slot 1 timing */ + ldr r2, =CFG_MCMEM1_VAL + str r2, [r1, #MCMEM1_OFFSET] + ldr r2, [r1, #MCMEM1_OFFSET] + + /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ + ldr r2, =CFG_MCATT0_VAL + str r2, [r1, #MCATT0_OFFSET] + ldr r2, [r1, #MCATT0_OFFSET] + + /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ + ldr r2, =CFG_MCATT1_VAL + str r2, [r1, #MCATT1_OFFSET] + ldr r2, [r1, #MCATT1_OFFSET] + + /* MCIO0: Card Interface I/O Space Timing, slot 0 */ + ldr r2, =CFG_MCIO0_VAL + str r2, [r1, #MCIO0_OFFSET] + ldr r2, [r1, #MCIO0_OFFSET] + + /* MCIO1: Card Interface I/O Space Timing, slot 1 */ + ldr r2, =CFG_MCIO1_VAL + str r2, [r1, #MCIO1_OFFSET] + ldr r2, [r1, #MCIO1_OFFSET] + + /* ---------------------------------------------------------------- */ + /* Step 2c: Write FLYCNFG FIXME: what's that??? */ + /* ---------------------------------------------------------------- */ + + + /* ---------------------------------------------------------------- */ + /* Step 2d: Initialize Timing for Sync Memory (SDCLK0) */ + /* ---------------------------------------------------------------- */ + + /* Before accessing MDREFR we need a valid DRI field, so we set */ + /* this to power on defaults + DIR field. */ + + ldr r4, =0x03ca4fff + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + ldr r4, =0x03ca4030 + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + /* Note: preserve the mdrefr value in r4 */ + + + /* ---------------------------------------------------------------- */ + /* Step 3: Initialize Synchronous Static Memory (Flash/Peripherals) */ + /* ---------------------------------------------------------------- */ + + /* Initialize SXCNFG register. Assert the enable bits */ + + /* Write SXMRS to cause an MRS command to all enabled banks of */ + /* synchronous static memory. Note that SXLCR need not be written */ + /* at this time. */ + + /* FIXME: we use async mode for now */ + + + /* ---------------------------------------------------------------- */ + /* Step 4: Initialize SDRAM */ + /* ---------------------------------------------------------------- */ + + /* Step 4a: assert MDREFR:K1RUN and MDREFR:K2RUN and configure */ + /* MDREFR:K1DB2 and MDREFR:K2DB2 as desired. */ + + orr r4, r4, #(MDREFR_K1RUN|MDREFR_K0RUN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4b: de-assert MDREFR:SLFRSH. */ + + bic r4, r4, #(MDREFR_SLFRSH) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4c: assert MDREFR:E1PIN and E0PIO */ + + orr r4, r4, #(MDREFR_E1PIN|MDREFR_E0PIN) + + str r4, [r1, #MDREFR_OFFSET] /* write back MDREFR */ + ldr r4, [r1, #MDREFR_OFFSET] + + + /* Step 4d: write MDCNFG with MDCNFG:DEx deasserted (set to 0), to */ + /* configure but not enable each SDRAM partition pair. */ + + ldr r4, =CFG_MDCNFG_VAL + bic r4, r4, #(MDCNFG_DE0|MDCNFG_DE1) + + str r4, [r1, #MDCNFG_OFFSET] /* write back MDCNFG */ + ldr r4, [r1, #MDCNFG_OFFSET] + + + /* Step 4e: Wait for the clock to the SDRAMs to stabilize, */ + /* 100..200 µsec. */ + + ldr r3, =OSCR /* reset the OS Timer Count to zero */ + mov r2, #0 + str r2, [r3] + ldr r4, =0x300 /* really 0x2E1 is about 200usec, */ + /* so 0x300 should be plenty */ +1: + ldr r2, [r3] + cmp r4, r2 + bgt 1b + + + /* Step 4f: Trigger a number (usually 8) refresh cycles by */ + /* attempting non-burst read or write accesses to disabled */ + /* SDRAM, as commonly specified in the power up sequence */ + /* documented in SDRAM data sheets. The address(es) used */ + /* for this purpose must not be cacheable. */ + + ldr r3, =CFG_DRAM_BASE + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + str r2, [r3] + + + /* Step 4g: Write MDCNFG with enable bits asserted */ + /* (MDCNFG:DEx set to 1). */ + + ldr r3, [r1, #MDCNFG_OFFSET] + orr r3, r3, #(MDCNFG_DE0|MDCNFG_DE1) + str r3, [r1, #MDCNFG_OFFSET] + + /* Step 4h: Write MDMRS. */ + + ldr r2, =CFG_MDMRS_VAL + str r2, [r1, #MDMRS_OFFSET] + + + /* We are finished with Intel's memory controller initialisation */ + + + /* ---------------------------------------------------------------- */ + /* Disable (mask) all interrupts at interrupt controller */ + /* ---------------------------------------------------------------- */ + +initirqs: + + mov r1, #0 /* clear int. level register (IRQ, not FIQ) */ + ldr r2, =ICLR + str r1, [r2] + + ldr r2, =ICMR /* mask all interrupts at the controller */ + str r1, [r2] + + + /* ---------------------------------------------------------------- */ + /* Clock initialisation */ + /* ---------------------------------------------------------------- */ + +initclks: + + /* Disable the peripheral clocks, and set the core clock frequency */ + /* (hard-coding at 398.12MHz for now). */ + + /* Turn Off ALL on-chip peripheral clocks for re-configuration */ + /* Note: See label 'ENABLECLKS' for the re-enabling */ + ldr r1, =CKEN + mov r2, #0 + str r2, [r1] + + + /* default value in case no valid rotary switch setting is found */ + ldr r2, =(CCCR_L27|CCCR_M2|CCCR_N10) /* DEFAULT: {200/200/100} */ + + /* ... and write the core clock config register */ + ldr r1, =CCCR + str r2, [r1] + + /* enable the 32Khz oscillator for RTC and PowerManager */ +/* + ldr r1, =OSCC + mov r2, #OSCC_OON + str r2, [r1] +*/ + /* NOTE: spin here until OSCC.OOK get set, meaning the PLL */ + /* has settled. */ +60: + ldr r2, [r1] + ands r2, r2, #1 + beq 60b + + /* ---------------------------------------------------------------- */ + /* */ + /* ---------------------------------------------------------------- */ + + /* Save SDRAM size */ + ldr r1, =DRAM_SIZE + str r8, [r1] + + /* Interrupt init: Mask all interrupts */ + ldr r0, =ICMR /* enable no sources */ + mov r1, #0 + str r1, [r0] + + /* FIXME */ + +#define NODEBUG +#ifdef NODEBUG + /*Disable software and data breakpoints */ + mov r0,#0 + mcr p15,0,r0,c14,c8,0 /* ibcr0 */ + mcr p15,0,r0,c14,c9,0 /* ibcr1 */ + mcr p15,0,r0,c14,c4,0 /* dbcon */ + + /*Enable all debug functionality */ + mov r0,#0x80000000 + mcr p14,0,r0,c10,c0,0 /* dcsr */ + +#endif + + /* ---------------------------------------------------------------- */ + /* End memsetup */ + /* ---------------------------------------------------------------- */ + +endmemsetup: + + mov pc, lr + diff --git a/board/innokom/u-boot.lds b/board/innokom/u-boot.lds new file mode 100644 index 0000000..0a89b32 --- /dev/null +++ b/board/innokom/u-boot.lds @@ -0,0 +1,53 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/xscale/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + armboot_end_data = .; + + . = ALIGN(4); + .bss : { *(.bss) } + + armboot_end = .; +} |