diff options
author | wdenk <wdenk> | 2002-11-03 00:38:21 +0000 |
---|---|---|
committer | wdenk <wdenk> | 2002-11-03 00:38:21 +0000 |
commit | fe8c2806cdba70479e351299881a395dc2be7785 (patch) | |
tree | a1e8b98a1838cba6e6f5c765d9d85339257c45f5 /board/ml2 | |
parent | f9087a3213cc245cf9b90436475b5af822bd7579 (diff) | |
download | bootable_bootloader_goldelico_gta04-fe8c2806cdba70479e351299881a395dc2be7785.zip bootable_bootloader_goldelico_gta04-fe8c2806cdba70479e351299881a395dc2be7785.tar.gz bootable_bootloader_goldelico_gta04-fe8c2806cdba70479e351299881a395dc2be7785.tar.bz2 |
Initial revision
Diffstat (limited to 'board/ml2')
-rw-r--r-- | board/ml2/flash.c | 301 | ||||
-rw-r--r-- | board/ml2/init.S | 34 | ||||
-rw-r--r-- | board/ml2/ml2.c | 67 |
3 files changed, 402 insertions, 0 deletions
diff --git a/board/ml2/flash.c b/board/ml2/flash.c new file mode 100644 index 0000000..77e0931 --- /dev/null +++ b/board/ml2/flash.c @@ -0,0 +1,301 @@ +/* + * flash.c: Support code for the flash chips on the Xilinx ML2 board + * + * Copyright 2002 Mind NV + * + * http://www.mind.be/ + * + * Author : Peter De Schrijver (p2@mind.be) + * + * This software may be used and distributed according to the terms of + * the GNU General Public License (GPL) version 2, incorporated herein by + * reference. Drivers based on or derived from this code fall under the GPL + * and must retain the authorship, copyright and this license notice. This + * file is not a complete program and may only be used when the entire program + * is licensed under the GPL. + * + */ + +#include <common.h> +#include <asm/u-boot.h> +#include <configs/ML2.h> + +#define FLASH_BANK_SIZE (64*1024*1024) + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; + +#define SECT_SIZE (512*1024) + +#define CMD_READ_ARRAY 0x00FF00FF00FF00FULL +#define CMD_IDENTIFY 0x0090009000900090ULL +#define CMD_ERASE_SETUP 0x0020002000200020ULL +#define CMD_ERASE_CONFIRM 0x00D000D000D000D0ULL +#define CMD_PROGRAM 0x0040004000400040ULL +#define CMD_RESUME 0x00D000D000D000D0ULL +#define CMD_SUSPEND 0x00B000B000B000B0ULL +#define CMD_STATUS_READ 0x0070007000700070ULL +#define CMD_STATUS_RESET 0x0050005000500050ULL + +#define BIT_BUSY 0x0080008000800080ULL +#define BIT_ERASE_SUSPEND 0x004000400400040ULL +#define BIT_ERASE_ERROR 0x0020002000200020ULL +#define BIT_PROGRAM_ERROR 0x0010001000100010ULL +#define BIT_VPP_RANGE_ERROR 0x0008000800080008ULL +#define BIT_PROGRAM_SUSPEND 0x0004000400040004ULL +#define BIT_PROTECT_ERROR 0x0002000200020002ULL +#define BIT_UNDEFINED 0x0001000100010001ULL + +#define BIT_SEQUENCE_ERROR 0x0030003000300030ULL + +#define BIT_TIMEOUT 0x80000000 + + +inline void eieio(void) { + + __asm__ __volatile__ ("eieio" : : : "memory"); + +} + +ulong flash_init(void) { + + int i, j; + ulong size = 0; + + for(i=0;i<CFG_MAX_FLASH_BANKS;i++) { + ulong flashbase = 0; + + flash_info[i].flash_id = (INTEL_MANUFACT & FLASH_VENDMASK) | + (INTEL_ID_28F128J3A & FLASH_TYPEMASK); + flash_info[i].size = FLASH_BANK_SIZE; + flash_info[i].sector_count = CFG_MAX_FLASH_SECT; + memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT); + if (i==0) + flashbase = CFG_FLASH_BASE; + else + panic("configured to many flash banks!\n"); + for (j = 0; j < flash_info[i].sector_count; j++) + flash_info[i].start[j]=flashbase + j * SECT_SIZE; + + size += flash_info[i].size; + } + + return size; +} + +void flash_print_info (flash_info_t *info) { + + int i; + + switch (info->flash_id & FLASH_VENDMASK) { + case (INTEL_MANUFACT & FLASH_VENDMASK): + printf("Intel: "); + break; + default: + printf("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case (INTEL_ID_28F128J3A & FLASH_TYPEMASK): + printf("4x 28F128J3A (128Mbit)\n"); + break; + default: + printf("Unknown Chip Type\n"); + break; + } + + printf(" Size: %ld MB in %d Sectors\n", info->size >> 20, info->sector_count); + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; i++) { + if ((i % 5) == 0) + printf("\n "); + printf (" %08lX%s", info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); +} + +int flash_error (unsigned long long code) { + + if (code & BIT_TIMEOUT) { + printf ("Timeout\n"); + return ERR_TIMOUT; + } + + if (~code & BIT_BUSY) { + printf ("Busy\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_VPP_RANGE_ERROR) { + printf ("Vpp range error\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_PROTECT_ERROR) { + printf ("Device protect error\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_SEQUENCE_ERROR) { + printf ("Command seqence error\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_ERASE_ERROR) { + printf ("Block erase error\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_PROGRAM_ERROR) { + printf ("Program error\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_ERASE_SUSPEND) { + printf ("Block erase suspended\n"); + return ERR_PROG_ERROR; + } + + if (code & BIT_PROGRAM_SUSPEND) { + printf ("Program suspended\n"); + return ERR_PROG_ERROR; + } + + return ERR_OK; + +} + +int flash_erase (flash_info_t *info, int s_first, int s_last) { + + int rc = ERR_OK; + int sect; + unsigned long long result; + + if (info->flash_id == FLASH_UNKNOWN) + return ERR_UNKNOWN_FLASH_TYPE; + + if ((s_first < 0) || (s_first > s_last)) + return ERR_INVAL; + + if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK)) + return ERR_UNKNOWN_FLASH_VENDOR; + + for (sect=s_first; sect<=s_last; ++sect) + if (info->protect[sect]) + return ERR_PROTECTED; + + for (sect = s_first; sect<=s_last && !ctrlc(); sect++) { + volatile unsigned long long *addr= + (unsigned long long *)(info->start[sect]); + + printf("Erasing sector %2d ... ", sect); + + *addr=CMD_STATUS_RESET; + eieio(); + *addr=CMD_ERASE_SETUP; + eieio(); + *addr=CMD_ERASE_CONFIRM; + eieio(); + + do { + result = *addr; + } while(~result & BIT_BUSY); + + *addr=CMD_READ_ARRAY; + + if ((rc = flash_error(result)) == ERR_OK) + printf("ok.\n"); + else + break; + } + + if (ctrlc()) + printf("User Interrupt!\n"); + + return rc; +} + +volatile static int write_word (flash_info_t *info, ulong dest, unsigned long long data) { + + volatile unsigned long long *addr=(unsigned long long *)dest; + unsigned long long result; + int rc = ERR_OK; + + result=*addr; + if ((result & data) != data) + return ERR_NOT_ERASED; + + *addr=CMD_STATUS_RESET; + eieio(); + *addr=CMD_PROGRAM; + eieio(); + *addr=data; + eieio(); + + do { + result=*addr; + } while(~result & BIT_BUSY); + + *addr=CMD_READ_ARRAY; + + rc = flash_error(result); + + return rc; + +} + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) { + + ulong cp, wp; + unsigned long long data; + int l; + int i,rc; + + wp=(addr & ~7); + + if((l=addr-wp) != 0) { + data=0; + for(i=0,cp=wp;i<l;++i,++cp) + data = (data >> 8) | (*(uchar *)cp << 24); + + for (; i<8 && cnt>0; ++i) { + data = (data >> 8) | (*src++ << 24); + --cnt; + ++cp; + } + + for (; i<8; ++i, ++cp) + data = (data >> 8) | (*(uchar *)cp << 24); + + if ((rc = write_word(info, wp, data)) != 0) + return rc; + + wp+=8; + } + + while(cnt>=8) { + data=*((unsigned long long *)src); + if ((rc = write_word(info, wp, data)) != 0) + return rc; + src+=8; + wp+=8; + cnt-=8; + } + + if(cnt == 0) + return ERR_OK; + + data = 0; + for (i=0, cp=wp; i<8 && cnt>0; ++i, ++cp) { + data = (data >> 8) | (*src++ << 24); + --cnt; + } + for (; i<8; ++i, ++cp) { + data = (data >> 8) | (*(uchar *)cp << 24); + } + + return write_word(info, wp, data); + +} + diff --git a/board/ml2/init.S b/board/ml2/init.S new file mode 100644 index 0000000..2386c2a --- /dev/null +++ b/board/ml2/init.S @@ -0,0 +1,34 @@ +/* + * init.S: Stubs for U-Boot initialization + * + * Copyright 2002 Mind NV + * + * http://www.mind.be/ + * + * Author : Peter De Schrijver (p2@mind.be) + * + * This software may be used and distributed according to the terms of + * the GNU General Public License (GPL) version 2, incorporated herein by + * reference. Drivers based on or derived from this code fall under the GPL + * and must retain the authorship, copyright and this license notice. This + * file is not a complete program and may only be used when the entire + * program is licensed under the GPL. + * + */ + +#include <ppc4xx.h> + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +#include <asm/cache.h> +#include <asm/mmu.h> + + + .globl ext_bus_cntlr_init +ext_bus_cntlr_init: + blr + + .globl sdram_init +sdram_init: + blr diff --git a/board/ml2/ml2.c b/board/ml2/ml2.c new file mode 100644 index 0000000..a89a8f9 --- /dev/null +++ b/board/ml2/ml2.c @@ -0,0 +1,67 @@ +/* + * ml2.c: U-Boot platform support for Xilinx ML2 board + * + * Copyright 2002 Mind NV + * + * http://www.mind.be/ + * + * Author : Peter De Schrijver (p2@mind.be) + * + * Derived from : Other platform support files in this tree + * + * This software may be used and distributed according to the terms of + * the GNU General Public License (GPL) version 2, incorporated herein by + * reference. Drivers based on or derived from this code fall under the GPL + * and must retain the authorship, copyright and this license notice. This + * file is not a complete program and may only be used when the entire + * program is licensed under the GPL. + * + */ + +#include <common.h> +#include <asm/processor.h> + + + +int board_pre_init (void) +{ + return 0; +} + + +int checkboard (void) +{ + unsigned char *s = getenv ("serial#"); + unsigned char *e; + + if (!s || strncmp (s, "ML2", 9)) { + printf ("### No HW ID - assuming ML2"); + } else { + for (e = s; *e; ++e) { + if (*e == ' ') + break; + } + + for (; s < e; ++s) { + putc (*s); + } + } + + + putc ('\n'); + + return (0); +} + + +long int initdram (int board_type) +{ + return 32 * 1024 * 1024; +} + +int testdram (void) +{ + printf ("test: xxx MB - ok\n"); + + return (0); +} |