diff options
author | Stefan Roese <sr@denx.de> | 2006-11-27 14:12:17 +0100 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2006-11-27 14:12:17 +0100 |
commit | 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 (patch) | |
tree | da4f0c35f18200eab6953d163866bdb11a9eb6c6 /board/prodrive | |
parent | 48c7d6dba9140869a1d644248aa8cfabe01c98a6 (diff) | |
download | bootable_bootloader_goldelico_gta04-1c2ce2262069510f31c7d3fd7efd3d58b8c0c148.zip bootable_bootloader_goldelico_gta04-1c2ce2262069510f31c7d3fd7efd3d58b8c0c148.tar.gz bootable_bootloader_goldelico_gta04-1c2ce2262069510f31c7d3fd7efd3d58b8c0c148.tar.bz2 |
[PATCH] Update Prodrive ALPR board support (440GX)
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'board/prodrive')
-rw-r--r-- | board/prodrive/alpr/Makefile | 4 | ||||
-rw-r--r-- | board/prodrive/alpr/alpr.c | 100 | ||||
-rw-r--r-- | board/prodrive/alpr/fpga.c | 79 | ||||
-rw-r--r-- | board/prodrive/alpr/init.S | 1 | ||||
-rw-r--r-- | board/prodrive/alpr/nand.c | 16 |
5 files changed, 118 insertions, 82 deletions
diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile index 1024a41..00dc180 100644 --- a/board/prodrive/alpr/Makefile +++ b/board/prodrive/alpr/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o fpga.o nand.o +COBJS = $(BOARD).o fpga.o nand.o SOBJS = init.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) crv $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index e8435bf..2389561 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -26,6 +26,7 @@ #include <asm/processor.h> #include <spd_sdram.h> #include <ppc4xx_enet.h> +#include <miiphy.h> DECLARE_GLOBAL_DATA_PTR; @@ -33,24 +34,14 @@ extern int alpr_fpga_init(void); int board_early_init_f (void) { - unsigned long mfr; - - /*-------------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------------*/ -#if 0 - mtebc(xbcfg, EBC_CFG_LE_UNLOCK | - EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | - EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | - EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | - EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); -#else + /*------------------------------------------------------------------------- + * Initialize EBC CONFIG + *-------------------------------------------------------------------------*/ mtebc(xbcfg, EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); -#endif /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -58,8 +49,8 @@ int board_early_init_f (void) mtdcr (uic0sr, 0xffffffff); /* clear all */ mtdcr (uic0er, 0x00000000); /* disable all */ mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ - mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */ - mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */ + mtdcr (uic0pr, 0xfffffe03); /* per manual */ + mtdcr (uic0tr, 0x01c00000); /* per manual */ mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ mtdcr (uic0sr, 0xffffffff); /* clear all */ @@ -85,12 +76,57 @@ int board_early_init_f (void) mtdcr (uicb0pr, 0xfc000000); /* */ mtdcr (uicb0tr, 0x00000000); /* */ mtdcr (uicb0vr, 0x00000001); /* */ - mfsdr (sdr_mfr, mfr); - mfr &= ~SDR0_MFR_ECS_MASK; + + /* Setup GPIO/IRQ multiplexing */ + mtsdr(sdr_pfc0, 0x01a03e00); return 0; } +int last_stage_init(void) +{ + unsigned short reg; + + /* + * Configure LED's of both Marvell 88E1111 PHY's + * + * This has to be done after the 4xx ethernet driver is loaded, + * so "last_stage_init()" is the right place. + */ + miiphy_read("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, ®); + reg |= 0x0001; + miiphy_write("ppc_4xx_eth2", CONFIG_PHY2_ADDR, 0x18, reg); + miiphy_read("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, ®); + reg |= 0x0001; + miiphy_write("ppc_4xx_eth3", CONFIG_PHY3_ADDR, 0x18, reg); + + return 0; +} + +static int board_rev(void) +{ + int rev; + u32 pfc0; + + /* Setup GPIO14 & 15 as GPIO */ + mfsdr(sdr_pfc0, pfc0); + pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1; + mtsdr(sdr_pfc0, pfc0); + + /* Setup as input */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); + out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); + + rev = (in32(GPIO0_IR) >> 16) & 0x3; + + /* Setup GPIO14 & 15 as non GPIO again */ + mfsdr(sdr_pfc0, pfc0); + pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1); + mtsdr(sdr_pfc0, pfc0); + + return rev; +} + int checkboard (void) { char *s = getenv ("serial#"); @@ -100,7 +136,7 @@ int checkboard (void) puts (", serial# "); puts (s); } - putc ('\n'); + printf(" (Rev. %d)\n", board_rev()); return (0); } @@ -224,10 +260,26 @@ void pci_target_init(struct pci_controller * hose ) * ************************************************************************/ #if defined(CONFIG_PCI) + +static void wait_for_pci_ready(void) +{ + /* + * Configure EREADY as input + */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CFG_GPIO_EREADY); + udelay(1000); + + for (;;) { + if (in32(GPIO0_IR) & CFG_GPIO_EREADY) + return; + } + +} + int is_pci_host(struct pci_controller *hose) { - /* The ocotea board is always configured as host. */ - return(1); + wait_for_pci_ready(); + return 1; /* return 1 for host controller */ } #endif /* defined(CONFIG_PCI) */ @@ -274,11 +326,3 @@ int post_hotkeys_pressed(void) return (ctrlc()); } #endif - -void board_reset(void) -{ - /* - * Initiate chip reset in debug control register DBCR - */ - mtspr(dbcr0, 0x20000000); -} diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c index 78307b4..e94360f 100644 --- a/board/prodrive/alpr/fpga.c +++ b/board/prodrive/alpr/fpga.c @@ -36,7 +36,7 @@ DECLARE_GLOBAL_DATA_PTR; -#if (CONFIG_FPGA) +#if defined(CONFIG_FPGA) #ifdef FPGA_DEBUG #define PRINTF(fmt,args...) printf (fmt ,##args) @@ -44,46 +44,38 @@ DECLARE_GLOBAL_DATA_PTR; #define PRINTF(fmt,args...) #endif -static unsigned long regval; +static unsigned long regval; -#define SET_GPIO_REG_0(reg, bit) {\ - regval = in32(reg);\ - regval &= ~(0x80000000 >> bit);\ - out32(reg, regval);\ - } - -#define SET_GPIO_REG_1(reg, bit) {\ - regval = in32(reg);\ - regval |= (0x80000000 >> bit);\ - out32(reg, regval);\ - } - -#define GPIO_CLK_PIN 0x00002000 -#define GPIO_CLK_PIN_I 0xffffdfff -#define GPIO_DAT_PIN 0x00001000 -#define GPIO_DAT_PIN_I 0xffffefff -#define GPIO_CLKDAT_PIN_I 0xffffcfff +#define SET_GPIO_REG_0(reg, bit) { \ + regval = in32(reg); \ + regval &= ~(0x80000000 >> bit); \ + out32(reg, regval); \ + } -#define SET_GPIO_CLK_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLK_PIN_I); -#define SET_GPIO_CLK_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_CLK_PIN); -#define SET_GPIO_DAT_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_DAT_PIN_I); -#define SET_GPIO_DAT_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_DAT_PIN); +#define SET_GPIO_REG_1(reg, bit) { \ + regval = in32(reg); \ + regval |= (0x80000000 >> bit); \ + out32(reg, regval); \ + } -#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) -#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) +#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) +#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) -#define SET_GPIO_CLK_0_Z1 out32(GPIO0_OR, (in32(GPIO0_OR) & GPIO_CLK_PIN_I) | GPIO_DAT_PIN); -#define SET_GPIO_CLK_0_Z0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLKDAT_PIN_I); +#define FPGA_PRG (0x80000000 >> CFG_GPIO_PROG_EN) +#define FPGA_CONFIG (0x80000000 >> CFG_GPIO_CONFIG) +#define FPGA_DATA (0x80000000 >> CFG_GPIO_DATA) +#define FPGA_CLK (0x80000000 >> CFG_GPIO_CLK) +#define OLD_VAL (FPGA_PRG | FPGA_CONFIG) -#define FPGA_WRITE_1 { \ - SET_GPIO_CLK_0_Z1\ - SET_GPIO_CLK_1} +#define SET_FPGA(data) out32(GPIO0_OR, data) -#define FPGA_WRITE_0 { \ - SET_GPIO_CLK_0_Z0\ - SET_GPIO_CLK_1} +#define FPGA_WRITE_1 { \ + SET_FPGA(OLD_VAL | 0 | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ -#define P_GP(reg) (reg & 0x00023f00) +#define FPGA_WRITE_0 { \ + SET_FPGA(OLD_VAL | 0 | 0 ); /* set data to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_CLK | 0 );} /* set data to 1 */ /* Plattforminitializations */ /* Here we have to set the FPGA Chain */ @@ -102,7 +94,7 @@ int fpga_pre_fn (int cookie) SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR); SET_GPIO_0((CFG_GPIO_SEL_DPR)); - /* initialize the GPIO Pins */ + /* initialize the GPIO Pins */ /* output */ SET_GPIO_0(CFG_GPIO_CLK); SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK); @@ -174,7 +166,7 @@ int fpga_done_fn (int cookie) } /* writes the complete buffer to the FPGA - writing the complete buffer in one function is very faster, + writing the complete buffer in one function is much faster, then calling it for every bit */ int fpga_write_fn (void *buf, size_t len, int flush, int cookie) { @@ -182,14 +174,10 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie) unsigned char *data = (unsigned char *) buf; unsigned char val=0; int i; + int len_40 = len / 40; while (bytecount < len) { -#ifdef CFG_FPGA_CHECK_CTRLC - if (ctrlc ()) { - return FPGA_FAIL; - } -#endif - val = data[bytecount ++ ]; + val = data[bytecount++]; i = 8; do { if (val & 0x01) { @@ -202,8 +190,13 @@ int fpga_write_fn (void *buf, size_t len, int flush, int cookie) } while (i > 0); #ifdef CFG_FPGA_PROG_FEEDBACK - if (bytecount % (len / 40) == 0) + if (bytecount % len_40 == 0) { putc ('.'); /* let them know we are alive */ +#ifdef CFG_FPGA_CHECK_CTRLC + if (ctrlc ()) + return FPGA_FAIL; +#endif + } #endif } return FPGA_SUCCESS; diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S index 1baa609..135674c 100644 --- a/board/prodrive/alpr/init.S +++ b/board/prodrive/alpr/init.S @@ -34,7 +34,6 @@ #define SZ_64K 0x00000030 #define SZ_256K 0x00000040 #define SZ_1M 0x00000050 -#define SZ_8M 0x00000060 #define SZ_16M 0x00000070 #define SZ_256M 0x00000090 diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index 20a8098..e63c921 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -32,19 +32,19 @@ #include <nand.h> struct alpr_ndfc_regs { - u16 cmd[4]; - u16 addr_wait; - u16 term; - u16 dummy; - u16 dummy2; - u16 data; + u8 cmd[4]; + u8 addr_wait; + u8 term; + u8 dummy; + u8 dummy2; + u8 data; }; static u8 hwctl; static struct alpr_ndfc_regs *alpr_ndfc = NULL; -#define readb(addr) (u8)(*(volatile u16 *)(addr)) -#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d)) +#define readb(addr) (u8)(*(volatile u8 *)(addr)) +#define writeb(d,addr) *(volatile u8 *)(addr) = ((u8)(d)) /* * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to |