added boot script files to repository

1 files changed, 0 insertions, 194 deletions

diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
deleted file mode 100644
index aaf3033..0000000
--- a/board/ti/evm/evm.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * (C) Copyright 2004-2008
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- *	Manikandan Pillai <mani.pillai@ti.com>
- *
- * Derived from Beagle Board and 3430 SDP code by
- *	Richard Woodruff <r-woodruff2@ti.com>
- *	Syed Mohammed Khasim <khasim@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <i2c.h>
-#include <asm/mach-types.h>
-#include "evm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static u32 omap3_evm_version;
-
-u32 get_omap3_evm_rev(void)
-{
-	return omap3_evm_version;
-}
-
-static void omap3_evm_get_revision(void)
-{
-#if defined(CONFIG_CMD_NET)
-	/*
-	 * Board revision can be ascertained only by identifying
-	 * the Ethernet chipset.
-	 */
-	unsigned int smsc_id;
-
-	/* Ethernet PHY ID is stored at ID_REV register */
-	smsc_id = readl(CONFIG_SMC911X_BASE + 0x50) & 0xFFFF0000;
-	printf("Read back SMSC id 0x%x\n", smsc_id);
-
-	switch (smsc_id) {
-	/* SMSC9115 chipset */
-	case 0x01150000:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
-		break;
-	/* SMSC 9220 chipset */
-	case 0x92200000:
-	default:
-		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-       }
-#else
-#if defined(CONFIG_STATIC_BOARD_REV)
-	/*
-	 * Look for static defintion of the board revision
-	 */
-	omap3_evm_version = CONFIG_STATIC_BOARD_REV;
-#else
-	/*
-	 * Fallback to the default above.
-	 */
-	omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
-#endif
-#endif	/* CONFIG_CMD_NET */
-}
-
-#ifdef CONFIG_USB_OMAP3
-/*
- * MUSB port on OMAP3EVM Rev >= E requires extvbus programming.
- */
-u8 omap3_evm_need_extvbus(void)
-{
-	u8 retval = 0;
-
-	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
-		retval = 1;
-
-	return retval;
-}
-#endif
-
-/*
- * Routine: board_init
- * Description: Early hardware init.
- */
-int board_init(void)
-{
-	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
-	/* board id for Linux */
-	gd->bd->bi_arch_number = MACH_TYPE_OMAP3EVM;
-	/* boot param addr */
-	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
-
-	return 0;
-}
-
-/*
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- */
-int misc_init_r(void)
-{
-
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
-#if defined(CONFIG_CMD_NET)
-	setup_net_chip();
-#endif
-	omap3_evm_get_revision();
-
-	dieid_num_r();
-
-	return 0;
-}
-
-/*
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers specific to the
- *		hardware. Many pins need to be moved from protect to primary
- *		mode.
- */
-void set_muxconf_regs(void)
-{
-	MUX_EVM();
-}
-
-/*
- * Routine: setup_net_chip
- * Description: Setting up the configuration GPMC registers specific to the
- *		Ethernet hardware.
- */
-static void setup_net_chip(void)
-{
-	struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
-	struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
-	/* Configure GPMC registers */
-	writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
-	writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
-	writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
-	writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
-	writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
-	writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
-	writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
-
-	/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
-	writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-	/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-	/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
-	writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
-		&ctrl_base->gpmc_nadv_ale);
-
-	/* Make GPIO 64 as output pin */
-	writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe);
-
-	/* Now send a pulse on the GPIO pin */
-	writel(GPIO0, &gpio3_base->setdataout);
-	udelay(1);
-	writel(GPIO0, &gpio3_base->cleardataout);
-	udelay(1);
-	writel(GPIO0, &gpio3_base->setdataout);
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_SMC911X
-	rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
-#endif
-	return rc;
-}