* Avoid flicker on the TRAB's VFD by synchronizing the enable with

  the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
  boards, version 153 for Rev. 200 boards).

* Patch by Vladimir Gurevich, 12 Mar 2003:
  Fix relocation problem of statically initialized string pointers
  in common/cmd_pci.c

* Patch by Kai-Uwe Blöm, 12 Mar 2003:
  Cleanup & bug fixes for JFFS2 code:
  - the memory mangement was broken. It caused havoc on malloc by
    writing beyond the block boundaries.
  - the length calculation for files was wrong, sometimes resulting
    in short file reads.
  - data copying now optionally takes fragment version numbers into
    account, to avoid copying from older data.
  See doc/README.JFFS2 for details.

8 files changed, 291 insertions, 235 deletions

diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 11cab00..a79d168 100644
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -38,10 +38,10 @@
 
 int misc_init_r(void)
 {
+#if 0	
 	uchar *str;
 	
 	/* determine if the software update key is pressed during startup */
-#if 0	
 	/* not ported yet... */
 	if (GPLR0 & 0x00000800) {
 		printf("using bootcmd_normal (sw-update button not pressed)\n");
diff --git a/board/emk/top860/config.mk b/board/emk/top860/config.mk
index 95917a1..7b940cb 100644
--- a/board/emk/top860/config.mk
+++ b/board/emk/top860/config.mk
@@ -21,4 +21,8 @@
 # MA 02111-1307 USA
 #
 
+#
+# TOP860 board
+#
+
 TEXT_BASE = 0x80000000
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
index 17f6353..0176d9c 100644
--- a/board/innokom/innokom.c
+++ b/board/innokom/innokom.c
@@ -39,7 +39,7 @@
  * The Innokom board has GPIO70 connected to SCLK which can be toggled
  * until all chips think that their current cycles are finished.
  */
-int i2c_init_board(void)
+void i2c_init_board(void)
 {
 	int i;
 
@@ -53,8 +53,6 @@ int i2c_init_board(void)
 	}
         /* set gpio pin to input */
         GPDR(70) &= ~GPIO_bit(70);
-
-	return 0;
 }
 
 
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
index a938750..dcf829b 100644
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -53,50 +53,47 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
  * Functions
  */
 static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int   write_data (flash_info_t *info, ulong dest, FPW data);
-static void  flash_get_offsets (ulong base, flash_info_t *info);
-void inline  spin_wheel(void);
+static int write_data (flash_info_t *info, ulong dest, FPW data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+void inline spin_wheel (void);
 
 /*-----------------------------------------------------------------------
  */
 
 unsigned long flash_init (void)
 {
-   int i;
-    ulong size = 0;
-
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
-    {
-        switch (i)
-        {
-           case 0:
-            flash_get_size((FPW *)PHYS_FLASH_1, &flash_info[i]);
-	         flash_get_offsets(PHYS_FLASH_1, &flash_info[i]);
-                break;
-           case 1:
-            flash_get_size((FPW *)PHYS_FLASH_2, &flash_info[i]);
-	         flash_get_offsets(PHYS_FLASH_2, &flash_info[i]);
-                break;
-           default:
-	        panic("configured to many flash banks!\n");
-                break;
-        }
-	size += flash_info[i].size;
-    }
-
-    /* Protect monitor and environment sectors
-     */
-    flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
-		  &flash_info[0]);
-
-    flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-		  &flash_info[0]);
-
-    return size;
+	int i;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		switch (i) {
+		case 0:
+			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
+			break;
+		case 1:
+			flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
+			flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
+			break;
+		default:
+			panic ("configured to many flash banks!\n");
+			break;
+		}
+		size += flash_info[i].size;
+	}
+
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_FLASH_BASE,
+			CFG_FLASH_BASE + _armboot_end_data - _armboot_start,
+			&flash_info[0] );
+
+	flash_protect ( FLAG_PROTECT_SET,
+			CFG_ENV_ADDR,
+			CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+
+	return size;
 }
 
 /*-----------------------------------------------------------------------
@@ -119,39 +116,45 @@ static void flash_get_offsets (ulong base, flash_info_t *info)
 
 /*-----------------------------------------------------------------------
  */
-void flash_print_info  (flash_info_t *info)
+void flash_print_info (flash_info_t *info)
 {
 	int i;
 
 	if (info->flash_id == FLASH_UNKNOWN) {
 		printf ("missing or unknown FLASH type\n");
 		return;
-        }
+	}
 
 	switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
-		default:		printf ("Unknown Vendor ");	break;
+	case FLASH_MAN_INTEL:
+		printf ("INTEL ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
 	}
 
 	switch (info->flash_id & FLASH_TYPEMASK) {
-   case FLASH_28F128J3A:
-				printf ("28F128J3A\n"); break;
-	default:		printf ("Unknown Chip Type\n"); break;
-        }
+	case FLASH_28F128J3A:
+		printf ("28F128J3A\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		break;
+	}
 
 	printf ("  Size: %ld MB in %d Sectors\n",
-	        info->size >> 20, info->sector_count);
+			info->size >> 20, info->sector_count);
 
 	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-	        if ((i % 5) == 0)
-	        printf ("\n   ");
+	for (i = 0; i < info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
 		printf (" %08lX%s",
 			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-        }
-        printf ("\n");
+			info->protect[i] ? " (RO)" : "     ");
+	}
+	printf ("\n");
 	return;
 }
 
@@ -163,37 +166,37 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 	volatile FPW value;
 
 	/* Write auto select command: read Manufacturer ID */
-	addr[0x5555] = (FPW)0x00AA00AA;
-	addr[0x2AAA] = (FPW)0x00550055;
-	addr[0x5555] = (FPW)0x00900090;
+	addr[0x5555] = (FPW) 0x00AA00AA;
+	addr[0x2AAA] = (FPW) 0x00550055;
+	addr[0x5555] = (FPW) 0x00900090;
 
-   mb();
+	mb ();
 	value = addr[0];
 
-   switch (value) {
+	switch (value) {
 
-   case (FPW)INTEL_MANUFACT:
-      info->flash_id = FLASH_MAN_INTEL;
-      break;
+	case (FPW) INTEL_MANUFACT:
+		info->flash_id = FLASH_MAN_INTEL;
+		break;
 
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
-		addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
-		return (0);			/* no or unknown flash	*/
+		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */
+		return (0);			/* no or unknown flash  */
 	}
 
-   mb();
-	value = addr[1];			/* device ID		*/
+	mb ();
+	value = addr[1];			/* device ID        */
 
-   switch (value) {
+	switch (value) {
 
-   case (FPW)INTEL_ID_28F128J3A:
-      info->flash_id += FLASH_28F128J3A;
-      info->sector_count = 128;
-      info->size = 0x02000000;
-      break;            /* => 16 MB     */
+	case (FPW) INTEL_ID_28F128J3A:
+		info->flash_id += FLASH_28F128J3A;
+		info->sector_count = 128;
+		info->size = 0x02000000;
+		break;				/* => 16 MB     */
 
 	default:
 		info->flash_id = FLASH_UNKNOWN;
@@ -204,9 +207,9 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 		printf ("** ERROR: sector count %d > max (%d) **\n",
 			info->sector_count, CFG_MAX_FLASH_SECT);
 		info->sector_count = CFG_MAX_FLASH_SECT;
-    }
+	}
 
-	addr[0] = (FPW)0x00FF00FF;      /* restore read mode */
+	addr[0] = (FPW) 0x00FF00FF;		/* restore read mode */
 
 	return (info->size);
 }
@@ -215,34 +218,34 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 /*-----------------------------------------------------------------------
  */
 
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t *info, int s_first, int s_last)
 {
-    int flag, prot, sect;
-	ulong type, start, now, last;
+	int flag, prot, sect;
+	ulong type, start, last;
 	int rcode = 0;
 
-    if ((s_first < 0) || (s_first > s_last)) {
+	if ((s_first < 0) || (s_first > s_last)) {
 		if (info->flash_id == FLASH_UNKNOWN) {
 			printf ("- missing\n");
 		} else {
 			printf ("- no sectors to erase\n");
 		}
 		return 1;
-    }
+	}
 
 	type = (info->flash_id & FLASH_VENDMASK);
 	if ((type != FLASH_MAN_INTEL)) {
 		printf ("Can't erase unknown flash type %08lx - aborted\n",
 			info->flash_id);
 		return 1;
-    }
+	}
 
-    prot = 0;
-    for (sect=s_first; sect<=s_last; ++sect) {
-	if (info->protect[sect]) {
-	    prot++;
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
 	}
-    }
 
 	if (prot) {
 		printf ("- Warning: %d protected sectors will not be erased!\n",
@@ -252,42 +255,42 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 	}
 
 	start = get_timer (0);
-	last  = start;
+	last = start;
 
-   /* Disable interrupts which might cause a timeout here */
-    flag = disable_interrupts();
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts ();
 
-    /* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			FPWV *addr = (FPWV *)(info->start[sect]);
+			FPWV *addr = (FPWV *) (info->start[sect]);
 			FPW status;
 
-	printf("Erasing sector %2d ... ", sect);
+			printf ("Erasing sector %2d ... ", sect);
 
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
+			/* arm simple, non interrupt dependent timer */
+			reset_timer_masked ();
 
-			*addr = (FPW)0x00500050;	/* clear status register */
-			*addr = (FPW)0x00200020;	/* erase setup */
-			*addr = (FPW)0x00D000D0;	/* erase confirm */
+			*addr = (FPW) 0x00500050;	/* clear status register */
+			*addr = (FPW) 0x00200020;	/* erase setup */
+			*addr = (FPW) 0x00D000D0;	/* erase confirm */
 
-			while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+			while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+				if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
 					printf ("Timeout\n");
-					*addr = (FPW)0x00B000B0; /* suspend erase	  */
-					*addr = (FPW)0x00FF00FF; /* reset to read mode */
+					*addr = (FPW) 0x00B000B0;	/* suspend erase     */
+					*addr = (FPW) 0x00FF00FF;	/* reset to read mode */
 					rcode = 1;
 					break;
-	}
-    }
+				}
+			}
 
-			*addr = 0x00500050; /* clear status register cmd.   */
-			*addr = 0x00FF00FF; /* resest to read mode          */
+			*addr = 0x00500050;	/* clear status register cmd.   */
+			*addr = 0x00FF00FF;	/* resest to read mode          */
 
 			printf (" done\n");
-        }
-        }
+		}
+	}
 	return rcode;
 }
 
@@ -301,7 +304,7 @@ int	flash_erase (flash_info_t *info, int s_first, int s_last)
 
 int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 {
-    ulong cp, wp;
+	ulong cp, wp;
 	FPW data;
 	int count, i, l, rc, port_width;
 
@@ -317,67 +320,66 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 	port_width = 4;
 #endif
 
-    /*
-     * handle unaligned start bytes
-     */
-    if ((l = addr - wp) != 0) {
-	data = 0;
-	for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-	}
-		for (; i<port_width && cnt>0; ++i) {
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < port_width && cnt > 0; ++i) {
 			data = (data << 8) | *src++;
-	    --cnt;
-	    ++cp;
-	}
-		for (; cnt==0 && i<port_width; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-	}
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < port_width; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
 
-		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
-	    return (rc);
-	}
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
 		wp += port_width;
-    }
+	}
 
-    /*
-     * handle word aligned part
-     */
+	/*
+	 * handle word aligned part
+	 */
 	count = 0;
 	while (cnt >= port_width) {
 		data = 0;
-		for (i=0; i<port_width; ++i) {
+		for (i = 0; i < port_width; ++i) {
 			data = (data << 8) | *src++;
 		}
-		if ((rc = write_data(info, wp, SWAP(data))) != 0) {
-	    return (rc);
-	}
-		wp  += port_width;
+		if ((rc = write_data (info, wp, SWAP (data))) != 0) {
+			return (rc);
+		}
+		wp += port_width;
 		cnt -= port_width;
-		if (count++ > 0x800)
-		{
-         spin_wheel();
+		if (count++ > 0x800) {
+			spin_wheel ();
 			count = 0;
 		}
-    }
+	}
 
-    if (cnt == 0) {
+	if (cnt == 0) {
 		return (0);
-    }
+	}
 
-    /*
-     * handle unaligned tail bytes
-     */
-    data = 0;
-	for (i=0, cp=wp; i<port_width && cnt>0; ++i, ++cp) {
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
 		data = (data << 8) | *src++;
-	--cnt;
-    }
-	for (; i<port_width; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
+		--cnt;
+	}
+	for (; i < port_width; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *) cp);
 	}
 
-	return (write_data(info, wp, SWAP(data)));
+	return (write_data (info, wp, SWAP (data)));
 }
 
 /*-----------------------------------------------------------------------
@@ -388,45 +390,42 @@ int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
  */
 static int write_data (flash_info_t *info, ulong dest, FPW data)
 {
-	FPWV *addr = (FPWV *)dest;
+	FPWV *addr = (FPWV *) dest;
 	ulong status;
-	ulong start;
 	int flag;
 
 	/* Check if Flash is (sufficiently) erased */
 	if ((*addr & data) != data) {
-		printf("not erased at %08lx (%x)\n",(ulong)addr,*addr);
+		printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
 		return (2);
 	}
 	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
+	flag = disable_interrupts ();
 
-	*addr = (FPW)0x00400040;		/* write setup */
+	*addr = (FPW) 0x00400040;	/* write setup */
 	*addr = data;
 
 	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
+	reset_timer_masked ();
 
 	/* wait while polling the status register */
-	while (((status = *addr) & (FPW)0x00800080) != (FPW)0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
-			*addr = (FPW)0x00FF00FF;	/* restore read mode */
+	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 			return (1);
 		}
-    }
+	}
 
-	*addr = (FPW)0x00FF00FF;	/* restore read mode */
+	*addr = (FPW) 0x00FF00FF;	/* restore read mode */
 
 	return (0);
 }
 
-void inline
-spin_wheel(void)
+void inline spin_wheel (void)
 {
-   static int r=0,p=0;
-   static char w[] = "\\/-";
+	static int p = 0;
+	static char w[] = "\\/-";
 
-   printf("\010%c", w[p]);
-   (++p == 3) ? (p = 0) : 0;
+	printf ("\010%c", w[p]);
+	(++p == 3) ? (p = 0) : 0;
 }
-
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 0a67090..19ead33 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -49,7 +49,9 @@ int mpl_prg(unsigned long src,unsigned long size)
 	unsigned long start;
 	flash_info_t *info;
 	int i,rc;
+#if defined(CONFIG_PIP405) || defined(CONFIG_MIP405)
 	unsigned long *magic = (unsigned long *)src;
+#endif
 
 	info = &flash_info[0];
 
diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c
index cdafc50..80bb61b 100644
--- a/board/mpl/vcma9/cmd_vcma9.c
+++ b/board/mpl/vcma9/cmd_vcma9.c
@@ -102,7 +102,7 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 				printf("\nplease defined 'ethaddr'\n");
 			}
 		} else if (strcmp(argv[2], "dump") == 0) {
-			uchar addr, endaddr, csum; ushort data;
+			uchar addr = 0, endaddr, csum; ushort data;
 
 			printf("Dump of CS8900 config device: ");
 			cs8900_e2prom_read(addr, &data);
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index 8e3552e..e452a7b 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -183,7 +183,6 @@ static uchar Get_Board_PCB(void)
 int checkboard(void)
 {
 	unsigned char s[50];
-	unsigned char bc, var, rc;
 	int i;
 	backup_t *b = (backup_t *) s;
 
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index 894e315..9b61f6e 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -59,10 +59,24 @@
 #define	FRAME_BUF_SIZE	((256*4*56)/8)
 #define frame_buf_offs 4
 
+/* defines for starting Timer3 as CPLD-Clk */
+#define START3			(1 << 16)
+#define UPDATE3			(1 << 17)
+#define INVERT3			(1 << 18)
+#define RELOAD3			(1 << 19)
+
+/* CPLD-Register for controlling vfd-blank-signal */
+#define VFD_DISABLE	(*(volatile uchar *)0x04038000=0x0000)
+#define VFD_ENABLE	(*(volatile uchar *)0x04038000=0x0001)
+
 /* Supported VFD Types */
 #define	VFD_TYPE_T119C		1	/* Noritake T119C VFD */
 #define	VFD_TYPE_MN11236	2
 
+/*#define NEW_CPLD_CLK*/
+
+int vfd_board_id;
+
 /* taken from armboot/common/vfd.c */
 unsigned long adr_vfd_table[112][18][2][4][2];
 unsigned char bit_vfd_table[112][18][2][4][2];
@@ -80,9 +94,7 @@ void init_grid_ctrl(void)
 	/*
 	 * clear frame buffer (logical clear => set to "black")
 	 */
-	memset ((void *)(gd->fb_base),
-		gd->vfd_inv_data ? 0xFF : 0,
-		FRAME_BUF_SIZE);
+	memset ((void *)(gd->fb_base), 0, FRAME_BUF_SIZE);
 
 	switch (gd->vfd_type) {
 	case VFD_TYPE_T119C:
@@ -98,10 +110,7 @@ void init_grid_ctrl(void)
 			bit_nr = bit % 8;
 			bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
 			temp=(*(volatile unsigned char*)(adr));
-			if (gd->vfd_inv_data)
-				temp &= ~(1<<bit_nr);
-			else
-				temp |=  (1<<bit_nr);
+			temp |=  (1<<bit_nr);
 			(*(volatile unsigned char*)(adr))=temp;
 
 			if(grid_cycle<55)
@@ -115,10 +124,7 @@ void init_grid_ctrl(void)
 			bit_nr = bit%8;
 			bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
 			temp=(*(volatile unsigned char*)(adr));
-			if (gd->vfd_inv_data)
-				temp &= ~(1<<bit_nr);
-			else
-				temp |=  (1<<bit_nr);
+			temp |=  (1<<bit_nr);
 			(*(volatile unsigned char*)(adr))=temp;
 		}
 	    }
@@ -136,10 +142,7 @@ void init_grid_ctrl(void)
 			bit_nr = bit % 8;
 			bit_nr = (bit_nr > 3) ? bit_nr-4 : bit_nr+4;
 			temp=(*(volatile unsigned char*)(adr));
-			if (gd->vfd_inv_data)
-				temp &= ~(1<<bit_nr);
-			else
-				temp |=  (1<<bit_nr);
+			temp |=  (1<<bit_nr);
 			(*(volatile unsigned char*)(adr))=temp;
 
 			if(grid_cycle<37)
@@ -152,10 +155,7 @@ void init_grid_ctrl(void)
 			bit_nr = bit%8;
 			bit_nr = (bit_nr>3)?bit_nr-4:bit_nr+4;
 			temp=(*(volatile unsigned char*)(adr));
-			if (gd->vfd_inv_data)
-				temp &= ~(1<<bit_nr);
-			else
-				temp |=  (1<<bit_nr);
+			temp |=  (1<<bit_nr);
 			(*(volatile unsigned char*)(adr))=temp;
 		}
 	    }
@@ -250,7 +250,7 @@ void create_vfd_table(void)
 			for(entry=0;entry<2;entry++) {
 			    unsigned long adr  = gd->fb_base;
 			    unsigned int bit_nr = 0;
-			    
+
 			    if (vfd_table[x][y][color][display][entry]) {
 
 				pixel  = vfd_table[x][y][color][display][entry] + frame_buf_offs;
@@ -295,18 +295,11 @@ void set_vfd_pixel(unsigned char x, unsigned char y,
 	bit_nr = bit_vfd_table[x][y][color][display][0];
 	temp=(*(volatile unsigned char*)(adr));
 
-	if (gd->vfd_inv_data) {
-		if (value)
-			temp &= ~(1<<bit_nr);
-		else
-			temp |=  (1<<bit_nr);
-	} else {
-		if (value)
-			temp |=  (1<<bit_nr);
-		else
-			temp &= ~(1<<bit_nr);
-	}
-	
+	if (value)
+		temp |=  (1<<bit_nr);
+	else
+		temp &= ~(1<<bit_nr);
+
 	(*(volatile unsigned char*)(adr))=temp;
 }
 
@@ -363,22 +356,59 @@ void transfer_pic(int display, unsigned char *adr, int height, int width)
  * This function initializes VFD clock that is needed for the CPLD that
  * manages the keyboard.
  */
-int vfd_init_clocks(void)
+int vfd_init_clocks (void)
 {
-	/* Port-Pins als LCD-Ausgang */
-	rPCCON =   (rPCCON & 0xFFFFFF00)| 0x000000AA;
-	/* Port-Pins als LCD-Ausgang */
-	rPDCON =   (rPDCON & 0xFFFFFF03)| 0x000000A8;
-#ifdef CFG_WITH_VFRAME
-	/* mit VFRAME zum Messen */
-	rPDCON =   (rPDCON & 0xFFFFFF00)| 0x000000AA;
-#endif
 
-	rLCDCON2 = 0x000DC000;
-	rLCDCON3 = 0x0051000A;
-	rLCDCON4 = 0x00000001;
-	rLCDCON5 = 0x00000440;
+	/* try to determine display type from the value
+	 * defined by pull-ups
+	 */
+	rPCUP = (rPCUP & 0xFFF0);	/* activate  GPC0...GPC3 pullups */
+	rPCCON = (rPCCON & 0xFFFFFF00);	/* configure GPC0...GPC3 as inputs */
+	udelay (10);				/* allow signals to settle */
+	vfd_board_id = (~rPCDAT) & 0x000F;	/* read GPC0...GPC3 port pins */
+
+	VFD_DISABLE;				/* activate blank for the vfd */
+
+#define	NEW_CPLD_CLK
+
+#ifdef NEW_CPLD_CLK
+	if (vfd_board_id) {
+		/* If new board revision, then use PWM 3 as cpld-clock */
+		/* Enable 500 Hz timer for fill level sensor to operate properly */
+		/* Configure TOUT3 as functional pin, disable pull-up */
+		rPDCON &= ~0x30000;
+		rPDCON |= 0x20000;
+		rPDUP |= (1 << 8);
+
+		/* Configure the prescaler */
+		rTCFG0 &= ~0xff00;
+		rTCFG0 |= 0x0f00;
+
+		/* Select MUX input (divider) for timer3 (1/16) */
+		rTCFG1 &= ~0xf000;
+		rTCFG1 |= 0x3000;
+
+		/* Enable autoreload and set the counter and compare
+		 * registers to values for the 500 Hz clock
+		 * (for a given  prescaler (15) and divider (16)):
+		 * counter = (66000000 / 500) >> 9;
+		 */
+		rTCNTB3 = 0x101;
+		rTCMPB3 = 0x101 / 2;
+
+		/* Start timer */
+		rTCON = (rTCON | UPDATE3 | RELOAD3) & ~INVERT3;
+		rTCON = (rTCON | START3) & ~UPDATE3;
+	}
+#endif
+	/* If old board revision, then use vm-signal as cpld-clock */
+	rLCDCON2 = 0x00FFC000;
+	rLCDCON3 = 0x0007FF00;
+	rLCDCON4 = 0x00000000;
+	rLCDCON5 = 0x00000400;
 	rLCDCON1 = 0x00000B75;
+	/* VM (GPD1) is used as clock for the CPLD */
+	rPDCON = (rPDCON & 0xFFFFFFF3) | 0x00000008;
 
 	return 0;
 }
@@ -397,7 +427,7 @@ int drv_vfd_init(void)
 	char *tmp;
 	ulong palette;
 	static int vfd_init_done = 0;
-	int vfd_id;
+	int vfd_inv_data = 0;
 
 	DECLARE_GLOBAL_DATA_PTR;
 
@@ -405,17 +435,9 @@ int drv_vfd_init(void)
 		return (0);
 	vfd_init_done = 1;
 
-	/* try to determine display type from the value
-	 * defined by pull-ups
-	 */
-	rPCUP  = (rPCUP & 0xFFF0);	/* activate  GPC0...GPC3 pullups */
-	rPCCON = (rPCCON & 0xFFFFFF00);	/* configure GPC0...GPC3 as inputs */
-	udelay(10);			/* allow signals to settle */
-
-	vfd_id = (~rPCDAT) & 0x000F;	/* read GPC0...GPC3 port pins */
-	debug("Detecting Revison of WA4-VFD: ID=0x%X\n", vfd_id);
+	debug("Detecting Revison of WA4-VFD: ID=0x%X\n", vfd_board_id);
 
-	switch (vfd_id) {
+	switch (vfd_board_id) {
 	case 0:			/* board revision < Rev.200 */
 		if ((tmp = getenv ("vfd_type")) == NULL) {
 			break;
@@ -428,19 +450,18 @@ int drv_vfd_init(void)
 			/* cannot use printf for a warning here */
 			gd->vfd_type = 0;	/* unknown */
 		}
-		gd->vfd_inv_data = 0;
 
 		break;
 	default:		/* default to MN11236, data inverted */
 		gd->vfd_type = VFD_TYPE_MN11236;
-		gd->vfd_inv_data = 1;
+		vfd_inv_data = 1;
 		setenv ("vfd_type", "MN11236");
 	}
 	debug ("VFD type: %s%s\n",
 		(gd->vfd_type == VFD_TYPE_T119C)   ? "T119C" :
 		(gd->vfd_type == VFD_TYPE_MN11236) ? "MN11236" :
 		"unknown",
-		gd->vfd_inv_data ? ", inverted data" : "");
+		vfd_inv_data ? ", inverted data" : "");
 
 	gd->fb_base = gd->fb_base;
 	create_vfd_table();
@@ -458,11 +479,33 @@ int drv_vfd_init(void)
 	 * (wrap around)
 	 * see manual S3C2400
 	 */
+	/* Stopp LCD-Controller */
+	rLCDCON1 = 0x00000000;
 	/* frame buffer startadr */
 	rLCDSADDR1 = gd->fb_base >> 1;
  	/* frame buffer endadr */
 	rLCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
 	rLCDSADDR3 = ((256/4));
+	rLCDCON2 = 0x000DC000;
+	rLCDCON3 = 0x0051000A;
+	rLCDCON4 = 0x00000001;
+	if (gd->vfd_type && vfd_inv_data)
+		rLCDCON5 = 0x000004C0;
+	else
+		rLCDCON5 = 0x00000440;
+
+	/* Port pins as LCD output */
+	rPCCON =   (rPCCON & 0xFFFFFF00)| 0x000000AA;
+	rPDCON =   (rPDCON & 0xFFFFFF03)| 0x000000A8;
+
+	/* Synchronize VFD enable with LCD controller to avoid flicker	*/
+	rLCDCON1 = 0x00000B75;			/* Start LCD-Controller	*/
+	while((rLCDCON5 & 0x180000)!=0x100000);	/* Wait for end of VSYNC */
+	while((rLCDCON5 & 0x060000)!=0x040000);	/* Wait for next HSYNC	*/
+	while((rLCDCON5 & 0x060000)==0x040000);
+	while((rLCDCON5 & 0x060000)!=0x000000);
+	if(gd->vfd_type)
+		VFD_ENABLE;
 
 	debug ("LCDSADDR1: %lX\n", rLCDSADDR1);
 	debug ("LCDSADDR2: %lX\n", rLCDSADDR2);
@@ -471,6 +514,17 @@ int drv_vfd_init(void)
 	return 0;
 }
 
+/*
+ * Disable VFD: should be run before resetting the system:
+ * disable VM, enable pull-up
+ */
+void disable_vfd (void)
+{
+	VFD_DISABLE;
+	rPDCON &= ~0xC;
+	rPDUP  &= ~0x2;
+}
+
 /************************************************************************/
 /* ** ROM capable initialization part - needed to reserve FB memory	*/
 /************************************************************************/