arm: Move cpu/$CPU to arch/arm/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

47 files changed, 0 insertions, 7473 deletions

diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile
deleted file mode 100644
index cbb13b2..0000000
--- a/cpu/arm920t/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(CPU).a
-
-START	= start.o
-
-COBJS-y	+= cpu.o
-COBJS-$(CONFIG_USE_IRQ)	+= interrupts.o
-
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS-y) $(SOBJS))
-START	:= $(addprefix $(obj),$(START))
-
-all:	$(obj).depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/a320/Makefile b/cpu/arm920t/a320/Makefile
deleted file mode 100644
index f030c53..0000000
--- a/cpu/arm920t/a320/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-SOBJS	+= reset.o
-COBJS	+= timer.o
-COBJS	+= ftsmc020.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/a320/ftsmc020.c b/cpu/arm920t/a320/ftsmc020.c
deleted file mode 100644
index 7646537..0000000
--- a/cpu/arm920t/a320/ftsmc020.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ftsmc020.h>
-
-struct ftsmc020_config {
-	unsigned int	config;
-	unsigned int	timing;
-};
-
-static struct ftsmc020_config config[] = CONFIG_SYS_FTSMC020_CONFIGS;
-
-static struct ftsmc020 *smc = (struct ftsmc020 *)CONFIG_FTSMC020_BASE;
-
-static void ftsmc020_setup_bank(unsigned int bank, struct ftsmc020_config *cfg)
-{
-	if (bank > 3) {
-		printf("bank # %u invalid\n", bank);
-		return;
-	}
-
-	writel(cfg->config, &smc->bank[bank].cr);
-	writel(cfg->timing, &smc->bank[bank].tpr);
-}
-
-void ftsmc020_init(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(config); i++)
-		ftsmc020_setup_bank(i, &config[i]);
-}
diff --git a/cpu/arm920t/a320/reset.S b/cpu/arm920t/a320/reset.S
deleted file mode 100644
index 12ca527..0000000
--- a/cpu/arm920t/a320/reset.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-.global reset_cpu
-reset_cpu:
-	b	reset_cpu
diff --git a/cpu/arm920t/a320/timer.c b/cpu/arm920t/a320/timer.c
deleted file mode 100644
index bb65593..0000000
--- a/cpu/arm920t/a320/timer.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ftpmu010.h>
-#include <asm/arch/fttmr010.h>
-
-static ulong timestamp;
-static ulong lastdec;
-
-static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE;
-
-#define TIMER_CLOCK	32768
-#define TIMER_LOAD_VAL	0xffffffff
-
-int timer_init(void)
-{
-	unsigned int oscc;
-	unsigned int cr;
-
-	debug("%s()\n", __func__);
-
-	/* disable timers */
-	writel(0, &tmr->cr);
-
-	/*
-	 * use 32768Hz oscillator for RTC, WDT, TIMER
-	 */
-
-	/* enable the 32768Hz oscillator */
-	oscc = readl(&pmu->OSCC);
-	oscc &= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI);
-	writel(oscc, &pmu->OSCC);
-
-	/* wait until ready */
-	while (!(readl(&pmu->OSCC) & FTPMU010_OSCC_OSCL_STABLE))
-		;
-
-	/* select 32768Hz oscillator */
-	oscc = readl(&pmu->OSCC);
-	oscc |= FTPMU010_OSCC_OSCL_RTCLSEL;
-	writel(oscc, &pmu->OSCC);
-
-	/* setup timer */
-	writel(TIMER_LOAD_VAL, &tmr->timer3_load);
-	writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
-	writel(0, &tmr->timer3_match1);
-	writel(0, &tmr->timer3_match2);
-
-	/* we don't want timer to issue interrupts */
-	writel(FTTMR010_TM3_MATCH1 |
-	       FTTMR010_TM3_MATCH2 |
-	       FTTMR010_TM3_OVERFLOW,
-	       &tmr->interrupt_mask);
-
-	cr = readl(&tmr->cr);
-	cr |= FTTMR010_TM3_CLOCK;	/* use external clock */
-	cr |= FTTMR010_TM3_ENABLE;
-	writel(cr, &tmr->cr);
-
-	/* init the timestamp and lastdec value */
-	reset_timer_masked();
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-/*
- * reset time
- */
-void reset_timer_masked(void)
-{
-	/* capure current decrementer value time */
-	lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-	timestamp = 0;		/* start "advancing" time stamp from 0 */
-
-	debug("%s(): lastdec = %lx\n", __func__, lastdec);
-}
-
-void reset_timer(void)
-{
-	debug("%s()\n", __func__);
-	reset_timer_masked();
-}
-
-/*
- * return timer ticks
- */
-ulong get_timer_masked(void)
-{
-	/* current tick value */
-	ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-
-	debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
-
-	if (lastdec >= now) {
-		/*
-		 * normal mode (non roll)
-		 * move stamp fordward with absoulte diff ticks
-		 */
-		timestamp += lastdec - now;
-	} else {
-		/*
-		 * we have overflow of the count down timer
-		 *
-		 * nts = ts + ld + (TLV - now)
-		 * ts=old stamp, ld=time that passed before passing through -1
-		 * (TLV-now) amount of time after passing though -1
-		 * nts = new "advancing time stamp"...it could also roll and
-		 * cause problems.
-		 */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
-	}
-
-	lastdec = now;
-
-	debug("%s() returns %lx\n", __func__, timestamp);
-
-	return timestamp;
-}
-
-/*
- * return difference between timer ticks and base
- */
-ulong get_timer(ulong base)
-{
-	debug("%s(%lx)\n", __func__, base);
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	debug("%s(%lx)\n", __func__, t);
-	timestamp = t;
-}
-
-/* delay x useconds AND perserve advance timstamp value */
-void udelay(unsigned long usec)
-{
-	long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
-	unsigned long now, last = readl(&tmr->timer3_counter);
-
-	debug("%s(%lu)\n", __func__, usec);
-	while (tmo > 0) {
-		now = readl(&tmr->timer3_counter);
-		if (now > last) /* count down timer overflow */
-			tmo -= TIMER_LOAD_VAL + last - now;
-		else
-			tmo -= last - now;
-		last = now;
-	}
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	debug("%s()\n", __func__);
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	debug("%s()\n", __func__);
-	return CONFIG_SYS_HZ;
-}
diff --git a/cpu/arm920t/at91/Makefile b/cpu/arm920t/at91/Makefile
deleted file mode 100644
index d8a4383..0000000
--- a/cpu/arm920t/at91/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-SOBJS	+= lowlevel_init.o
-COBJS	+= reset.o
-COBJS	+= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/at91/lowlevel_init.S b/cpu/arm920t/at91/lowlevel_init.S
deleted file mode 100644
index 22fc86c..0000000
--- a/cpu/arm920t/at91/lowlevel_init.S
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_mc.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-
-#define ARM920T_CONTROL	0xC0000000	/* @ set bit 31 (iA) and 30 (nF) */
-
-_MTEXT_BASE:
-#undef START_FROM_MEM
-#ifdef START_FROM_MEM
-	.word	TEXT_BASE-PHYS_FLASH_1
-#else
-	.word	TEXT_BASE
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
-	ldr     r1, =AT91_ASM_PMC_MOR
-	/* Main oscillator Enable register */
-#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
-	ldr     r0, =0x0000FF01		/* Enable main oscillator */
-#else
-	ldr     r0, =0x0000FF00		/* Disable main oscillator */
-#endif
-	str     r0, [r1] /*AT91C_CKGR_MOR] */
-	/* Add loop to compensate Main Oscillator startup time */
-	ldr     r0, =0x00000010
-LoopOsc:
-	subs    r0, r0, #1
-	bhi     LoopOsc
-
-	/* memory control configuration */
-	/* this isn't very elegant, but	 what the heck */
-	ldr	r0, =SMRDATA
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #80
-pllloop:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	pllloop
-	/* delay - this is all done by guess */
-	ldr	r0, =0x00010000
-	/* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */
-lock:
-	subs	r0, r0, #1
-	bhi	lock
-	ldr	r0, =SMRDATA1
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #176
-sdinit:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	sdinit
-
-	/* switch from FastBus to Asynchronous clock mode */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #ARM920T_CONTROL
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/* everything is fine now */
-	mov	pc, lr
-
-	.ltorg
-
-SMRDATA:
-	.word AT91_ASM_MC_EBI_CFG
-	.word CONFIG_SYS_EBI_CFGR_VAL
-	.word AT91_ASM_MC_SMC_CSR0
-	.word CONFIG_SYS_SMC_CSR0_VAL
-	.word AT91_ASM_PMC_PLLAR
-	.word CONFIG_SYS_PLLAR_VAL
-	.word AT91_ASM_PMC_PLLBR
-	.word CONFIG_SYS_PLLBR_VAL
-	.word AT91_ASM_PMC_MCKR
-	.word CONFIG_SYS_MCKR_VAL
-	/* here there's a delay */
-SMRDATA1:
-	.word AT91_ASM_PIOC_ASR
-	.word CONFIG_SYS_PIOC_ASR_VAL
-	.word AT91_ASM_PIOC_BSR
-	.word CONFIG_SYS_PIOC_BSR_VAL
-	.word AT91_ASM_PIOC_PDR
-	.word CONFIG_SYS_PIOC_PDR_VAL
-	.word AT91_ASM_MC_EBI_CSA
-	.word CONFIG_SYS_EBI_CSA_VAL
-	.word AT91_ASM_MC_SDRAMC_CR
-	.word CONFIG_SYS_SDRC_CR_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL1
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL2
-	.word CONFIG_SYS_SDRAM1
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_TR
-	.word CONFIG_SYS_SDRC_TR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91_ASM_MC_SDRAMC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL3
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/cpu/arm920t/at91/reset.c b/cpu/arm920t/at91/reset.c
deleted file mode 100644
index ce9c156..0000000
--- a/cpu/arm920t/at91/reset.c
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/at91_st.h>
-
-void board_reset(void) __attribute__((__weak__));
-
-void reset_cpu(ulong ignored)
-{
-	at91_st_t *st = (at91_st_t *) AT91_ST_BASE;
-#if defined(CONFIG_AT91RM9200_USART)
-	/*shutdown the console to avoid strange chars during reset */
-	serial_exit();
-#endif
-
-	if (board_reset)
-		board_reset();
-
-	/* Reset the cpu by setting up the watchdog timer */
-	writel(AT91_ST_WDMR_RSTEN | AT91_ST_WDMR_EXTEN | AT91_ST_WDMR_WDV(2),
-		&st->wdmr);
-	writel(AT91_ST_CR_WDRST, &st->cr);
-	/* and let it timeout */
-	while (1)
-		;
-	/* Never reached */
-}
diff --git a/cpu/arm920t/at91/timer.c b/cpu/arm920t/at91/timer.c
deleted file mode 100644
index 91377d4..0000000
--- a/cpu/arm920t/at91/timer.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_tc.h>
-#include <asm/arch/at91_pmc.h>
-
-/* the number of clocks per CONFIG_SYS_HZ */
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-
-static u32 timestamp;
-static u32 lastinc;
-
-int timer_init(void)
-{
-	at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
-	at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
-
-	/* enables TC1.0 clock */
-	writel(1 << AT91_ID_TC0, &pmc->pcer);	/* enable clock */
-
-	writel(0, &tc->bcr);
-	writel(AT91_TC_BMR_TC0XC0S_NONE | AT91_TC_BMR_TC1XC1S_NONE |
-		AT91_TC_BMR_TC2XC2S_NONE , &tc->bmr);
-
-	writel(AT91_TC_CCR_CLKDIS, &tc->tc[0].ccr);
-	/* set to MCLK/2 and restart the timer
-	when the value in TC_RC is reached */
-	writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr);
-
-	writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interupts */
-	writel(TIMER_LOAD_VAL, &tc->tc[0].rc);
-
-	writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr);
-	lastinc = 0;
-	timestamp = 0;
-
-	return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay(unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
-	lastinc = readl(&tc->tc[0].cv) & 0x0000ffff;
-	timestamp = 0;
-}
-
-ulong get_timer_raw(void)
-{
-	at91_tc_t *tc = (at91_tc_t *) AT91_TC_BASE;
-	u32 now;
-
-	now = readl(&tc->tc[0].cv) & 0x0000ffff;
-
-	if (now >= lastinc) {
-		/* normal mode */
-		timestamp += now - lastinc;
-	} else {
-		/* we have an overflow ... */
-		timestamp += now + TIMER_LOAD_VAL - lastinc;
-	}
-	lastinc = now;
-
-	return timestamp;
-}
-
-ulong get_timer_masked(void)
-{
-	return get_timer_raw()/TIMER_LOAD_VAL;
-}
-
-void udelay_masked(unsigned long usec)
-{
-	u32 tmo;
-	u32 endtime;
-	signed long diff;
-
-	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
-	tmo *= usec;
-	tmo /= 1000;
-
-	endtime = get_timer_raw() + tmo;
-
-	do {
-		u32 now = get_timer_raw();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile
deleted file mode 100644
index 114d8ad..0000000
--- a/cpu/arm920t/at91rm9200/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-SOBJS	+= lowlevel_init.o
-
-COBJS	+= bcm5221.o
-COBJS	+= dm9161.o
-COBJS	+= ether.o
-COBJS	+= i2c.o
-COBJS-$(CONFIG_KS8721_PHY)	+= ks8721.o
-COBJS	+= lxt972.o
-COBJS	+= reset.o
-COBJS	+= spi.o
-COBJS	+= timer.o
-COBJS	+= usb.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/at91rm9200/bcm5221.c b/cpu/arm920t/at91rm9200/bcm5221.c
deleted file mode 100644
index 8de3cba..0000000
--- a/cpu/arm920t/at91rm9200/bcm5221.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*
- * Broadcom BCM5221 Ethernet PHY
- *
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#ifdef CONFIG_DRIVER_ETHER
-
-#include <bcm5221.h>
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	bcm5221_IsPhyConnected
- * Description:
- *	Reads the 2 PHY ID registers
- * Arguments:
- *	p_mac - pointer to AT91S_EMAC struct
- * Return value:
- *	TRUE - if id read successfully
- *	FALSE- if error
- */
-unsigned int bcm5221_IsPhyConnected (AT91PS_EMAC p_mac)
-{
-	unsigned short Id1, Id2;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacReadPhy (p_mac, BCM5221_PHYID1, &Id1);
-	at91rm9200_EmacReadPhy (p_mac, BCM5221_PHYID2, &Id2);
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	if ((Id1 == (BCM5221_PHYID1_OUI >> 6)) &&
-		((Id2 >> 10) == (BCM5221_PHYID1_OUI & BCM5221_LSB_MASK)))
-		return TRUE;
-
-	return FALSE;
-}
-
-/*
- * Name:
- *	bcm5221_GetLinkSpeed
- * Description:
- *	Link parallel detection status of MAC is checked and set in the
- *	MAC configuration registers
- * Arguments:
- *	p_mac - pointer to MAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-unsigned char bcm5221_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
-	unsigned short stat1, stat2;
-
-	if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_BMSR, &stat1))
-		return FALSE;
-
-	if (!(stat1 & BCM5221_LINK_STATUS))	/* link status up? */
-		return FALSE;
-
-	if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_ACSR, &stat2))
-		return FALSE;
-
-	if ((stat1 & BCM5221_100BASE_TX_FD) && (stat2 & BCM5221_100) && (stat2 & BCM5221_FDX)) {
-		/*set Emac for 100BaseTX and Full Duplex  */
-		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		return TRUE;
-	}
-
-	if ((stat1 & BCM5221_10BASE_T_FD) && !(stat2 & BCM5221_100) && (stat2 & BCM5221_FDX)) {
-		/*set MII for 10BaseT and Full Duplex  */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_FD;
-		return TRUE;
-	}
-
-	if ((stat1 & BCM5221_100BASE_TX_HD) && (stat2 & BCM5221_100) && !(stat2 & BCM5221_FDX)) {
-		/*set MII for 100BaseTX and Half Duplex  */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_SPD;
-		return TRUE;
-	}
-
-	if ((stat1 & BCM5221_10BASE_T_HD) && !(stat2 & BCM5221_100) && !(stat2 & BCM5221_FDX)) {
-		/*set MII for 10BaseT and Half Duplex  */
-		p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
-		return TRUE;
-	}
-	return FALSE;
-}
-
-
-/*
- * Name:
- *	bcm5221_InitPhy
- * Description:
- *	MAC starts checking its link by using parallel detection and
- *	Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-unsigned char bcm5221_InitPhy (AT91PS_EMAC p_mac)
-{
-	unsigned char ret = TRUE;
-	unsigned short IntValue;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-
-	if (!bcm5221_GetLinkSpeed (p_mac)) {
-		/* Try another time */
-		ret = bcm5221_GetLinkSpeed (p_mac);
-	}
-
-	/* Disable PHY Interrupts */
-	at91rm9200_EmacReadPhy (p_mac, BCM5221_INTR, &IntValue);
-	/* clear FDX LED and INTR Enable */
-	IntValue &= ~(BCM5221_FDX_LED | BCM5221_INTR_ENABLE);
-	/* set FDX, SPD, Link, INTR masks */
-	IntValue |= (BCM5221_FDX_MASK  | BCM5221_SPD_MASK |
-		     BCM5221_LINK_MASK | BCM5221_INTR_MASK);
-	at91rm9200_EmacWritePhy (p_mac, BCM5221_INTR, &IntValue);
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	return (ret);
-}
-
-
-/*
- * Name:
- *	bcm5221_AutoNegotiate
- * Description:
- *	MAC Autonegotiates with the partner status of same is set in the
- *	MAC configuration registers
- * Arguments:
- *	dev - pointer to struct net_device
- * Return value:
- *	TRUE - if link status set successfully
- *	FALSE - if link status not set
- */
-unsigned char bcm5221_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
-	unsigned short value;
-	unsigned short PhyAnar;
-	unsigned short PhyAnalpar;
-
-	/* Set bcm5221 control register */
-	if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_BMCR, &value))
-		return FALSE;
-	value &= ~BCM5221_AUTONEG;	/* remove autonegotiation enable */
-	value |=  BCM5221_ISOLATE;	/* Electrically isolate PHY */
-	if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_BMCR, &value))
-		return FALSE;
-
-	/* Set the Auto_negotiation Advertisement Register */
-	/* MII advertising for 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
-	PhyAnar = BCM5221_TX_FDX | BCM5221_TX_HDX |
-		  BCM5221_10_FDX | BCM5221_10_HDX | BCM5221_AN_IEEE_802_3;
-	if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_ANAR, &PhyAnar))
-		return FALSE;
-
-	/* Read the Control Register     */
-	if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_BMCR, &value))
-		return FALSE;
-
-	value |= BCM5221_SPEED_SELECT | BCM5221_AUTONEG | BCM5221_DUPLEX_MODE;
-	if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_BMCR, &value))
-		return FALSE;
-	/* Restart Auto_negotiation  */
-	value |= BCM5221_RESTART_AUTONEG;
-	value &= ~BCM5221_ISOLATE;
-	if (!at91rm9200_EmacWritePhy (p_mac, BCM5221_BMCR, &value))
-		return FALSE;
-
-	/*check AutoNegotiate complete */
-	udelay (10000);
-	at91rm9200_EmacReadPhy (p_mac, BCM5221_BMSR, &value);
-	if (!(value & BCM5221_AUTONEG_COMP))
-		return FALSE;
-
-	/* Get the AutoNeg Link partner base page */
-	if (!at91rm9200_EmacReadPhy (p_mac, BCM5221_ANLPAR, &PhyAnalpar))
-		return FALSE;
-
-	if ((PhyAnar & BCM5221_TX_FDX) && (PhyAnalpar & BCM5221_TX_FDX)) {
-		/*set MII for 100BaseTX and Full Duplex  */
-		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		return TRUE;
-	}
-
-	if ((PhyAnar & BCM5221_10_FDX) && (PhyAnalpar & BCM5221_10_FDX)) {
-		/*set MII for 10BaseT and Full Duplex  */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_FD;
-		return TRUE;
-	}
-	return FALSE;
-}
-
-#endif
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm920t/at91rm9200/dm9161.c b/cpu/arm920t/at91rm9200/dm9161.c
deleted file mode 100644
index 6d4384f..0000000
--- a/cpu/arm920t/at91rm9200/dm9161.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#ifdef CONFIG_DRIVER_ETHER
-#include <dm9161.h>
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	dm9161_IsPhyConnected
- * Description:
- *	Reads the 2 PHY ID registers
- * Arguments:
- *	p_mac - pointer to AT91S_EMAC struct
- * Return value:
- *	TRUE - if id read successfully
- *	FALSE- if error
- */
-unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac)
-{
-	unsigned short Id1, Id2;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1);
-	at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2);
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	if ((Id1 == (DM9161_PHYID1_OUI >> 6)) &&
-		((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK)))
-		return TRUE;
-
-	return FALSE;
-}
-
-/*
- * Name:
- *	dm9161_GetLinkSpeed
- * Description:
- *	Link parallel detection status of MAC is checked and set in the
- *	MAC configuration registers
- * Arguments:
- *	p_mac - pointer to MAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
-	unsigned short stat1, stat2;
-
-	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1))
-		return FALSE;
-
-	if (!(stat1 & DM9161_LINK_STATUS))	/* link status up? */
-		return FALSE;
-
-	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2))
-		return FALSE;
-
-	if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) {
-		/*set Emac for 100BaseTX and Full Duplex  */
-		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		return TRUE;
-	}
-
-	if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) {
-		/*set MII for 10BaseT and Full Duplex  */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_FD;
-		return TRUE;
-	}
-
-	if ((stat1 & DM9161_100BASE_TX_HD) && (stat2 & DM9161_100HDX)) {
-		/*set MII for 100BaseTX and Half Duplex  */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_SPD;
-		return TRUE;
-	}
-
-	if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) {
-		/*set MII for 10BaseT and Half Duplex  */
-		p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
-		return TRUE;
-	}
-	return FALSE;
-}
-
-
-/*
- * Name:
- *	dm9161_InitPhy
- * Description:
- *	MAC starts checking its link by using parallel detection and
- *	Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
-{
-	UCHAR ret = TRUE;
-	unsigned short IntValue;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-
-	if (!dm9161_GetLinkSpeed (p_mac)) {
-		/* Try another time */
-		ret = dm9161_GetLinkSpeed (p_mac);
-	}
-
-	/* Disable PHY Interrupts */
-	at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
-	/* set FDX, SPD, Link, INTR masks */
-	IntValue |= (DM9161_FDX_MASK | DM9161_SPD_MASK |
-			DM9161_LINK_MASK | DM9161_INTR_MASK);
-	at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	return (ret);
-}
-
-
-/*
- * Name:
- *	dm9161_AutoNegotiate
- * Description:
- *	MAC Autonegotiates with the partner status of same is set in the
- *	MAC configuration registers
- * Arguments:
- *	dev - pointer to struct net_device
- * Return value:
- *	TRUE - if link status set successfully
- *	FALSE - if link status not set
- */
-UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
-	unsigned short value;
-	unsigned short PhyAnar;
-	unsigned short PhyAnalpar;
-
-	/* Set dm9161 control register */
-	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
-		return FALSE;
-	value &= ~DM9161_AUTONEG;	/* remove autonegotiation enable */
-	value |= DM9161_ISOLATE;	/* Electrically isolate PHY */
-	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
-		return FALSE;
-
-	/* Set the Auto_negotiation Advertisement Register	*/
-	/* MII advertising for Next page, 100BaseTxFD and HD,	*/
-	/* 10BaseTFD and HD, IEEE 802.3 */
-	PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
-			DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
-	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
-		return FALSE;
-
-	/* Read the Control Register     */
-	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
-		return FALSE;
-
-	value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE;
-	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
-		return FALSE;
-	/* Restart Auto_negotiation  */
-	value |= DM9161_RESTART_AUTONEG;
-	value &= ~DM9161_ISOLATE;
-	if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
-		return FALSE;
-
-	/*check AutoNegotiate complete */
-	udelay (10000);
-	at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value);
-	if (!(value & DM9161_AUTONEG_COMP))
-		return FALSE;
-
-	/* Get the AutoNeg Link partner base page */
-	if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar))
-		return FALSE;
-
-	if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) {
-		/*set MII for 100BaseTX and Full Duplex  */
-		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		return TRUE;
-	}
-
-	if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) {
-		/*set MII for 10BaseT and Full Duplex  */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_FD;
-		return TRUE;
-	}
-	return FALSE;
-}
-
-#endif
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm920t/at91rm9200/ether.c b/cpu/arm920t/at91rm9200/ether.c
deleted file mode 100644
index 91eab95..0000000
--- a/cpu/arm920t/at91rm9200/ether.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <miiphy.h>
-#include <asm/mach-types.h>
-
-/* ----- Ethernet Buffer definitions ----- */
-
-typedef struct {
-	unsigned long addr, size;
-} rbf_t;
-
-#define RBF_ADDR      0xfffffffc
-#define RBF_OWNER     (1<<0)
-#define RBF_WRAP      (1<<1)
-#define RBF_BROADCAST (1<<31)
-#define RBF_MULTICAST (1<<30)
-#define RBF_UNICAST   (1<<29)
-#define RBF_EXTERNAL  (1<<28)
-#define RBF_UNKOWN    (1<<27)
-#define RBF_SIZE      0x07ff
-#define RBF_LOCAL4    (1<<26)
-#define RBF_LOCAL3    (1<<25)
-#define RBF_LOCAL2    (1<<24)
-#define RBF_LOCAL1    (1<<23)
-
-#define RBF_FRAMEMAX 64
-#define RBF_FRAMELEN 0x600
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/* alignment as per Errata #11 (64 bytes) is insufficient! */
-rbf_t rbfdt[RBF_FRAMEMAX] __attribute__((aligned(512)));
-rbf_t *rbfp;
-
-unsigned char rbf_framebuf[RBF_FRAMEMAX][RBF_FRAMELEN]
-	__attribute__((aligned(4)));
-
-/* structure to interface the PHY */
-AT91S_PhyOps PhyOps;
-
-AT91PS_EMAC p_mac;
-
-/*********** EMAC Phy layer Management functions *************************/
-/*
- * Name:
- *	at91rm9200_EmacEnableMDIO
- * Description:
- *	Enables the MDIO bit in MAC control register
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	none
- */
-void at91rm9200_EmacEnableMDIO (AT91PS_EMAC p_mac)
-{
-	/* Mac CTRL reg set for MDIO enable */
-	p_mac->EMAC_CTL |= AT91C_EMAC_MPE;	/* Management port enable */
-}
-
-/*
- * Name:
- *	at91rm9200_EmacDisableMDIO
- * Description:
- *	Disables the MDIO bit in MAC control register
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	none
- */
-void at91rm9200_EmacDisableMDIO (AT91PS_EMAC p_mac)
-{
-	/* Mac CTRL reg set for MDIO disable */
-	p_mac->EMAC_CTL &= ~AT91C_EMAC_MPE;	/* Management port disable */
-}
-
-
-/*
- * Name:
- *	at91rm9200_EmacReadPhy
- * Description:
- *	Reads data from the PHY register
- * Arguments:
- *	dev - pointer to struct net_device
- *	RegisterAddress - unsigned char
- *	pInput - pointer to value read from register
- * Return value:
- *	TRUE - if data read successfully
- */
-UCHAR at91rm9200_EmacReadPhy (AT91PS_EMAC p_mac,
-				     unsigned char RegisterAddress,
-				     unsigned short *pInput)
-{
-	p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
-			  (AT91C_EMAC_RW_R) |
-			  (RegisterAddress << 18) |
-			  (AT91C_EMAC_CODE_802_3);
-
-	udelay (10000);
-
-	*pInput = (unsigned short) p_mac->EMAC_MAN;
-
-	return TRUE;
-}
-
-
-/*
- * Name:
- *	at91rm9200_EmacWritePhy
- * Description:
- *	Writes data to the PHY register
- * Arguments:
- *	dev - pointer to struct net_device
- *	RegisterAddress - unsigned char
- *	pOutput - pointer to value to be written in the register
- * Return value:
- *	TRUE - if data read successfully
- */
-UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
-				      unsigned char RegisterAddress,
-				      unsigned short *pOutput)
-{
-	p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
-			AT91C_EMAC_CODE_802_3 | AT91C_EMAC_RW_W |
-			(RegisterAddress << 18) | *pOutput;
-
-	udelay (10000);
-
-	return TRUE;
-}
-
-int eth_init (bd_t * bd)
-{
-	int ret;
-	int i;
-	uchar enetaddr[6];
-
-	p_mac = AT91C_BASE_EMAC;
-
-	/* PIO Disable Register */
-	*AT91C_PIOA_PDR = AT91C_PA16_EMDIO | AT91C_PA15_EMDC | AT91C_PA14_ERXER |
-			  AT91C_PA13_ERX1 | AT91C_PA12_ERX0 | AT91C_PA11_ECRS_ECRSDV |
-			  AT91C_PA10_ETX1 | AT91C_PA9_ETX0 | AT91C_PA8_ETXEN |
-			  AT91C_PA7_ETXCK_EREFCK;
-
-#ifdef CONFIG_AT91C_USE_RMII
-	*AT91C_PIOB_PDR = AT91C_PB19_ERXCK;
-	*AT91C_PIOB_BSR = AT91C_PB19_ERXCK;
-#else
-	*AT91C_PIOB_PDR = AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV |
-			  AT91C_PB16_ERX3 | AT91C_PB15_ERX2 | AT91C_PB14_ETXER |
-			  AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-
-	/* Select B Register */
-	*AT91C_PIOB_BSR = AT91C_PB19_ERXCK | AT91C_PB18_ECOL |
-			  AT91C_PB17_ERXDV | AT91C_PB16_ERX3 | AT91C_PB15_ERX2 |
-			  AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-#endif
-
-	*AT91C_PMC_PCER = 1 << AT91C_ID_EMAC;	/* Peripheral Clock Enable Register */
-
-	p_mac->EMAC_CFG |= AT91C_EMAC_CSR;	/* Clear statistics */
-
-	/* Init Ethernet buffers */
-	for (i = 0; i < RBF_FRAMEMAX; i++) {
-		rbfdt[i].addr = (unsigned long)rbf_framebuf[i];
-		rbfdt[i].size = 0;
-	}
-	rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
-	rbfp = &rbfdt[0];
-
-	eth_getenv_enetaddr("ethaddr", enetaddr);
-
-	/* The CSB337 originally used a version of the MicroMonitor bootloader
-	 * which saved Ethernet addresses in the "wrong" order.  Operating
-	 * systems (like Linux) know this, and apply a workaround.  Replicate
-	 * that MicroMonitor behavior so we avoid needing to make such OS code
-	 * care about which bootloader was used.
-	 */
-	if (machine_is_csb337()) {
-		p_mac->EMAC_SA2H = (enetaddr[0] <<  8) | (enetaddr[1]);
-		p_mac->EMAC_SA2L = (enetaddr[2] << 24) | (enetaddr[3] << 16)
-				 | (enetaddr[4] <<  8) | (enetaddr[5]);
-	} else {
-		p_mac->EMAC_SA2L = (enetaddr[3] << 24) | (enetaddr[2] << 16)
-				 | (enetaddr[1] <<  8) | (enetaddr[0]);
-		p_mac->EMAC_SA2H = (enetaddr[5] <<  8) | (enetaddr[4]);
-	}
-
-	p_mac->EMAC_RBQP = (long) (&rbfdt[0]);
-	p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
-
-	p_mac->EMAC_CFG = (p_mac->EMAC_CFG | AT91C_EMAC_CAF | AT91C_EMAC_NBC)
-			& ~AT91C_EMAC_CLK;
-
-#ifdef CONFIG_AT91C_USE_RMII
-	p_mac->EMAC_CFG |= AT91C_EMAC_RMII;
-#endif
-
-#if (AT91C_MASTER_CLOCK > 40000000)
-	/* MDIO clock must not exceed 2.5 MHz, so enable MCK divider */
-	p_mac->EMAC_CFG |= AT91C_EMAC_CLK_HCLK_64;
-#endif
-
-	p_mac->EMAC_CTL |= AT91C_EMAC_TE | AT91C_EMAC_RE;
-
-	at91rm9200_GetPhyInterface (& PhyOps);
-
-	if (!PhyOps.IsPhyConnected (p_mac))
-		printf ("PHY not connected!!\n\r");
-
-	/* MII management start from here */
-	if (!(p_mac->EMAC_SR & AT91C_EMAC_LINK)) {
-		if (!(ret = PhyOps.Init (p_mac))) {
-			printf ("MAC: error during MII initialization\n");
-			return 0;
-		}
-	} else {
-		printf ("No link\n\r");
-		return 0;
-	}
-
-	return 0;
-}
-
-int eth_send (volatile void *packet, int length)
-{
-	while (!(p_mac->EMAC_TSR & AT91C_EMAC_BNQ));
-	p_mac->EMAC_TAR = (long) packet;
-	p_mac->EMAC_TCR = length;
-	while (p_mac->EMAC_TCR & 0x7ff);
-	p_mac->EMAC_TSR |= AT91C_EMAC_COMP;
-	return 0;
-}
-
-int eth_rx (void)
-{
-	int size;
-
-	if (!(rbfp->addr & RBF_OWNER))
-		return 0;
-
-	size = rbfp->size & RBF_SIZE;
-	NetReceive ((volatile uchar *) (rbfp->addr & RBF_ADDR), size);
-
-	rbfp->addr &= ~RBF_OWNER;
-	if (rbfp->addr & RBF_WRAP)
-		rbfp = &rbfdt[0];
-	else
-		rbfp++;
-
-	p_mac->EMAC_RSR |= AT91C_EMAC_REC;
-
-	return size;
-}
-
-void eth_halt (void)
-{
-};
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-int  at91rm9200_miiphy_read(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short * value)
-{
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacReadPhy (p_mac, reg, value);
-	at91rm9200_EmacDisableMDIO (p_mac);
-	return 0;
-}
-
-int  at91rm9200_miiphy_write(char *devname, unsigned char addr,
-		unsigned char reg, unsigned short value)
-{
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacWritePhy (p_mac, reg, &value);
-	at91rm9200_EmacDisableMDIO (p_mac);
-	return 0;
-}
-
-#endif
-
-int at91rm9200_miiphy_initialize(bd_t *bis)
-{
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-	miiphy_register("at91rm9200phy", at91rm9200_miiphy_read, at91rm9200_miiphy_write);
-#endif
-	return 0;
-}
-
-#endif
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm920t/at91rm9200/i2c.c b/cpu/arm920t/at91rm9200/i2c.c
deleted file mode 100644
index 1711088..0000000
--- a/cpu/arm920t/at91rm9200/i2c.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- *  i2c Support for Atmel's AT91RM9200 Two-Wire Interface
- *
- *  (c) Rick Bronson
- *
- *  Borrowed heavily from original work by:
- *  Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com>
- *
- *  Modified to work with u-boot by (C) 2004 Gary Jennejohn garyj@denx.de
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
-*/
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-
-#include <at91rm9200_i2c.h>
-
-/* define DEBUG */
-
-/*
- * Poll the i2c status register until the specified bit is set.
- * Returns 0 if timed out (100 msec)
- */
-static short at91_poll_status(AT91PS_TWI twi, unsigned long bit) {
-	int loop_cntr = 10000;
-	do {
-		udelay(10);
-	} while (!(twi->TWI_SR & bit) && (--loop_cntr > 0));
-
-	return (loop_cntr > 0);
-}
-
-/*
- * Generic i2c master transfer entrypoint
- *
- * rw == 1 means that this is a read
- */
-static int
-at91_xfer(unsigned char chip, unsigned int addr, int alen,
-						unsigned char *buffer, int len, int rw)
-{
-	AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE;
-	int length;
-	unsigned char *buf;
-	/* Set the TWI Master Mode Register */
-	twi->TWI_MMR = (chip << 16) | (alen << 8)
-		| ((rw == 1) ? AT91C_TWI_MREAD : 0);
-
-	/* Set TWI Internal Address Register with first messages data field */
-	if (alen > 0)
-		twi->TWI_IADR = addr;
-
-	length = len;
-	buf = buffer;
-	if (length && buf) {	/* sanity check */
-		if (rw) {
-			twi->TWI_CR = AT91C_TWI_START;
-			while (length--) {
-				if (!length)
-					twi->TWI_CR = AT91C_TWI_STOP;
-				/* Wait until transfer is finished */
-				if (!at91_poll_status(twi, AT91C_TWI_RXRDY)) {
-					debug ("at91_i2c: timeout 1\n");
-					return 1;
-				}
-				*buf++ = twi->TWI_RHR;
-			}
-			if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
-				debug ("at91_i2c: timeout 2\n");
-				return 1;
-			}
-		} else {
-			twi->TWI_CR = AT91C_TWI_START;
-			while (length--) {
-				twi->TWI_THR = *buf++;
-				if (!length)
-					twi->TWI_CR = AT91C_TWI_STOP;
-				if (!at91_poll_status(twi, AT91C_TWI_TXRDY)) {
-					debug ("at91_i2c: timeout 3\n");
-					return 1;
-				}
-			}
-			/* Wait until transfer is finished */
-			if (!at91_poll_status(twi, AT91C_TWI_TXCOMP)) {
-				debug ("at91_i2c: timeout 4\n");
-				return 1;
-			}
-		}
-	}
-	return 0;
-}
-
-int
-i2c_probe(unsigned char chip)
-{
-	unsigned char buffer[1];
-
-	return at91_xfer(chip, 0, 0, buffer, 1, 1);
-}
-
-int
-i2c_read (unsigned char chip, unsigned int addr, int alen,
-	  unsigned char *buffer, int len)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-	/* we only allow one address byte */
-	if (alen > 1)
-		return 1;
-	/* XXX assume an ATMEL AT24C16 */
-	if (alen == 1) {
-#if 0 /* EEPROM code already sets this correctly */
-		chip |= (addr >> 8) & 0xff;
-#endif
-		addr = addr & 0xff;
-	}
-#endif
-	return at91_xfer(chip, addr, alen, buffer, len, 1);
-}
-
-int
-i2c_write(unsigned char chip, unsigned int addr, int alen,
-	  unsigned char *buffer, int len)
-{
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-	int i;
-	unsigned char *buf;
-
-	/* we only allow one address byte */
-	if (alen > 1)
-		return 1;
-	/* XXX assume an ATMEL AT24C16 */
-	if (alen == 1) {
-		buf = buffer;
-		/* do single byte writes */
-		for (i = 0; i < len; i++) {
-#if 0 /* EEPROM code already sets this correctly */
-			chip |= (addr >> 8) & 0xff;
-#endif
-			addr = addr & 0xff;
-			if (at91_xfer(chip, addr, alen, buf++, 1, 0))
-				return 1;
-			addr++;
-		}
-		return 0;
-	}
-#endif
-	return at91_xfer(chip, addr, alen, buffer, len, 0);
-}
-
-/*
- * Main initialization routine
- */
-void
-i2c_init(int speed, int slaveaddr)
-{
-	AT91PS_TWI twi = (AT91PS_TWI) AT91_TWI_BASE;
-
-	*AT91C_PIOA_PDR = AT91C_PA25_TWD | AT91C_PA26_TWCK;
-	*AT91C_PIOA_ASR = AT91C_PA25_TWD | AT91C_PA26_TWCK;
-	*AT91C_PIOA_MDER = AT91C_PA25_TWD | AT91C_PA26_TWCK;
-	*AT91C_PMC_PCER = 1 << AT91C_ID_TWI;		/* enable peripheral clock */
-
-	twi->TWI_IDR = 0x3ff;				/* Disable all interrupts */
-	twi->TWI_CR = AT91C_TWI_SWRST;			/* Reset peripheral */
-	twi->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS;	/* Set Master mode */
-
-	/* Here, CKDIV = 1 and CHDIV=CLDIV  ==> CLDIV = CHDIV = 1/4*((Fmclk/FTWI) -6) */
-	twi->TWI_CWGR = AT91C_TWI_CKDIV1 | AT91C_TWI_CLDIV3 | (AT91C_TWI_CLDIV3 << 8);
-
-	debug ("Found AT91 i2c\n");
-	return;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/arm920t/at91rm9200/ks8721.c b/cpu/arm920t/at91rm9200/ks8721.c
deleted file mode 100644
index 9fe3793..0000000
--- a/cpu/arm920t/at91rm9200/ks8721.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2006
- * Author : Eric Benard (Eukrea Electromatique)
- * based on dm9161.c which is :
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <ks8721.h>
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	ks8721_isphyconnected
- * Description:
- *	Reads the 2 PHY ID registers
- * Arguments:
- *	p_mac - pointer to AT91S_EMAC struct
- * Return value:
- *	1 - if id read successfully
- *	0 - if error
- */
-unsigned int ks8721_isphyconnected(AT91PS_EMAC p_mac)
-{
-	unsigned short id1, id2;
-
-	at91rm9200_EmacEnableMDIO(p_mac);
-	at91rm9200_EmacReadPhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_PHYID1, &id1);
-	at91rm9200_EmacReadPhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_PHYID2, &id2);
-	at91rm9200_EmacDisableMDIO(p_mac);
-
-	if ((id1 == (KS8721_PHYID_OUI >> 6)) &&
-		((id2 >> 10) == (KS8721_PHYID_OUI & KS8721_LSB_MASK))) {
-		if ((id2 & KS8721_MODELMASK) == KS8721BL_MODEL)
-			printf("Micrel KS8721bL PHY detected : ");
-		else
-			printf("Unknown Micrel PHY detected : ");
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Name:
- *	ks8721_getlinkspeed
- * Description:
- *	Link parallel detection status of MAC is checked and set in the
- *	MAC configuration registers
- * Arguments:
- *	p_mac - pointer to MAC
- * Return value:
- *	1 - if link status set succesfully
- *	0 - if link status not set
- */
-unsigned char ks8721_getlinkspeed(AT91PS_EMAC p_mac)
-{
-	unsigned short stat1;
-
-	if (!at91rm9200_EmacReadPhy(p_mac, KS8721_BMSR, &stat1))
-		return 0;
-
-	if (!(stat1 & KS8721_LINK_STATUS)) {
-		/* link status up? */
-		printf("Link Down !\n");
-		return 0;
-	}
-
-	if (stat1 & KS8721_100BASE_TX_FD) {
-		/* set Emac for 100BaseTX and Full Duplex */
-		printf("100BT FD\n");
-		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		return 1;
-	}
-
-	if (stat1 & KS8721_10BASE_T_FD) {
-		/* set MII for 10BaseT and Full Duplex */
-		printf("10BT FD\n");
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_FD;
-		return 1;
-	}
-
-	if (stat1 & KS8721_100BASE_T4_HD) {
-		/* set MII for 100BaseTX and Half Duplex */
-		printf("100BT HD\n");
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_SPD;
-		return 1;
-	}
-
-	if (stat1 & KS8721_10BASE_T_HD) {
-		/* set MII for 10BaseT and Half Duplex */
-		printf("10BT HD\n");
-		p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
-		return 1;
-	}
-	return 0;
-}
-
-/*
- * Name:
- *	ks8721_initphy
- * Description:
- *	MAC starts checking its link by using parallel detection and
- *	Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	1 - if link status set succesfully
- *	0 - if link status not set
- */
-unsigned char ks8721_initphy(AT91PS_EMAC p_mac)
-{
-	unsigned char ret = 1;
-	unsigned short intvalue;
-
-	at91rm9200_EmacEnableMDIO(p_mac);
-
-	/* Try another time */
-	if (!ks8721_getlinkspeed(p_mac))
-		ret = ks8721_getlinkspeed(p_mac);
-
-	/* Disable PHY Interrupts */
-	intvalue = 0;
-	at91rm9200_EmacWritePhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_MDINTR, &intvalue);
-	at91rm9200_EmacDisableMDIO(p_mac);
-
-	return ret;
-}
-
-/*
- * Name:
- *	ks8721_autonegotiate
- * Description:
- *	MAC Autonegotiates with the partner status of same is set in the
- *	MAC configuration registers
- * Arguments:
- *	dev - pointer to struct net_device
- * Return value:
- *	1 - if link status set successfully
- *	0 - if link status not set
- */
-unsigned char ks8721_autonegotiate(AT91PS_EMAC p_mac, int *status)
-{
-	unsigned short value;
-	unsigned short phyanar;
-	unsigned short phyanalpar;
-
-	/* Set ks8721 control register */
-	if (!at91rm9200_EmacReadPhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_BMCR, &value))
-		return 0;
-
-	/* remove autonegotiation enable */
-	value &= ~KS8721_AUTONEG;
-	/* Electrically isolate PHY */
-	value |= KS8721_ISOLATE;
-	if (!at91rm9200_EmacWritePhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
-		return 0;
-	}
-	/*
-	 * Set the Auto_negotiation Advertisement Register
-	 * MII advertising for Next page, 100BaseTxFD and HD,
-	 * 10BaseTFD and HD, IEEE 802.3
-	 */
-	phyanar = KS8721_NP | KS8721_TX_FDX | KS8721_TX_HDX |
-		  KS8721_10_FDX | KS8721_10_HDX | KS8721_AN_IEEE_802_3;
-	if (!at91rm9200_EmacWritePhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_ANAR, &phyanar)) {
-		return 0;
-	}
-	/* Read the Control Register */
-	if (!at91rm9200_EmacReadPhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
-		return 0;
-	}
-	value |= KS8721_SPEED_SELECT | KS8721_AUTONEG | KS8721_DUPLEX_MODE;
-	if (!at91rm9200_EmacWritePhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
-		return 0;
-	}
-	/* Restart Auto_negotiation */
-	value |= KS8721_RESTART_AUTONEG;
-	value &= ~KS8721_ISOLATE;
-	if (!at91rm9200_EmacWritePhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_BMCR, &value)) {
-		return 0;
-	}
-	/* Check AutoNegotiate complete */
-	udelay(10000);
-	at91rm9200_EmacReadPhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_BMSR, &value);
-	if (!(value & KS8721_AUTONEG_COMP))
-		return 0;
-
-	/* Get the AutoNeg Link partner base page */
-	if (!at91rm9200_EmacReadPhy(p_mac,
-		CONFIG_PHY_ADDRESS | KS8721_ANLPAR, &phyanalpar)) {
-		return 0;
-	}
-
-	if ((phyanar & KS8721_TX_FDX) && (phyanalpar & KS8721_TX_FDX)) {
-		/* Set MII for 100BaseTX and Full Duplex */
-		p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		return 1;
-	}
-
-	if ((phyanar & KS8721_10_FDX) && (phyanalpar & KS8721_10_FDX)) {
-		/* Set MII for 10BaseT and Full Duplex */
-		p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-				~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-				| AT91C_EMAC_FD;
-		return 1;
-	}
-	return 0;
-}
-
-#endif	/* CONFIG_CMD_NET */
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm920t/at91rm9200/lowlevel_init.S b/cpu/arm920t/at91rm9200/lowlevel_init.S
deleted file mode 100644
index d8bb960..0000000
--- a/cpu/arm920t/at91rm9200/lowlevel_init.S
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- *		       Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the at91rm9200dk board by
- * (C) Copyright 2004
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-/*
- * some parameters for the board
- *
- * This is based on rm9200dk.cfg for the BDI2000 from ABATRON which in
- * turn is based on the boot.bin code from ATMEL
- *
- */
-#include <asm/arch/AT91RM9200.h>
-
-_MTEXT_BASE:
-#undef START_FROM_MEM
-#ifdef START_FROM_MEM
-	.word	TEXT_BASE-PHYS_FLASH_1
-#else
-	.word	TEXT_BASE
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
-	/* Get the CKGR Base Address */
-	ldr     r1, =AT91C_BASE_CKGR
-	/* Main oscillator Enable register */
-#ifdef CONFIG_SYS_USE_MAIN_OSCILLATOR
-	ldr     r0, =0x0000FF01		/* Enable main oscillator,  OSCOUNT = 0xFF */
-#else
-	ldr     r0, =0x0000FF00		/* Disable main oscillator, OSCOUNT = 0xFF */
-#endif
-	str     r0, [r1, #AT91C_CKGR_MOR]
-	/* Add loop to compensate Main Oscillator startup time */
-	ldr     r0, =0x00000010
-LoopOsc:
-	subs    r0, r0, #1
-	bhi     LoopOsc
-
-	/* memory control configuration */
-	/* this isn't very elegant, but	 what the heck */
-	ldr	r0, =SMRDATA
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #80
-0:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	0b
-	/* delay - this is all done by guess */
-	ldr	r0, =0x00010000
-	/* (vs reading PMC_SR for LOCKA, LOCKB ... or MOSCS earlier) */
-1:
-	subs	r0, r0, #1
-	bhi	1b
-	ldr	r0, =SMRDATA1
-	ldr	r1, _MTEXT_BASE
-	sub	r0, r0, r1
-	add	r2, r0, #176
-2:
-	/* the address */
-	ldr	r1, [r0], #4
-	/* the value */
-	ldr	r3, [r0], #4
-	str	r3, [r1]
-	cmp	r2, r0
-	bne	2b
-
-	/* switch from FastBus to Asynchronous clock mode */
-	mrc	p15, 0, r0, c1, c0, 0
-	orr	r0, r0, #0xC0000000	@ set bit 31 (iA) and 30 (nF)
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/* everything is fine now */
-	mov	pc, lr
-
-	.ltorg
-
-SMRDATA:
-	.word AT91C_EBI_CFGR
-	.word CONFIG_SYS_EBI_CFGR_VAL
-	.word AT91C_SMC_CSR0
-	.word CONFIG_SYS_SMC_CSR0_VAL
-	.word AT91C_PLLAR
-	.word CONFIG_SYS_PLLAR_VAL
-	.word AT91C_PLLBR
-	.word CONFIG_SYS_PLLBR_VAL
-	.word AT91C_MCKR
-	.word CONFIG_SYS_MCKR_VAL
-	/* here there's a delay */
-SMRDATA1:
-	.word AT91C_PIOC_ASR
-	.word CONFIG_SYS_PIOC_ASR_VAL
-	.word AT91C_PIOC_BSR
-	.word CONFIG_SYS_PIOC_BSR_VAL
-	.word AT91C_PIOC_PDR
-	.word CONFIG_SYS_PIOC_PDR_VAL
-	.word AT91C_EBI_CSA
-	.word CONFIG_SYS_EBI_CSA_VAL
-	.word AT91C_SDRC_CR
-	.word CONFIG_SYS_SDRC_CR_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL1
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL2
-	.word CONFIG_SYS_SDRAM1
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_TR
-	.word CONFIG_SYS_SDRC_TR_VAL
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	.word AT91C_SDRC_MR
-	.word CONFIG_SYS_SDRC_MR_VAL3
-	.word CONFIG_SYS_SDRAM
-	.word CONFIG_SYS_SDRAM_VAL
-	/* SMRDATA1 is 176 bytes long */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/cpu/arm920t/at91rm9200/lxt972.c b/cpu/arm920t/at91rm9200/lxt972.c
deleted file mode 100644
index 260d393..0000000
--- a/cpu/arm920t/at91rm9200/lxt972.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Author : Hamid Ikdoumi (Atmel)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board: 22APR2005
- */
-
-#include <common.h>
-#include <at91rm9200_net.h>
-#include <net.h>
-#include <miiphy.h>
-#include <lxt971a.h>
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- *	lxt972_IsPhyConnected
- * Description:
- *	Reads the 2 PHY ID registers
- * Arguments:
- *	p_mac - pointer to AT91S_EMAC struct
- * Return value:
- *	TRUE - if id read successfully
- *	FALSE- if error
- */
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac)
-{
-	unsigned short Id1, Id2;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-	at91rm9200_EmacReadPhy(p_mac, PHY_PHYIDR1, &Id1);
-	at91rm9200_EmacReadPhy(p_mac, PHY_PHYIDR2, &Id2);
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	if ((Id1 == (0x0013)) && ((Id2  & 0xFFF0) == 0x78E0))
-		return TRUE;
-
-	return FALSE;
-}
-
-/*
- * Name:
- *	lxt972_GetLinkSpeed
- * Description:
- *	Link parallel detection status of MAC is checked and set in the
- *	MAC configuration registers
- * Arguments:
- *	p_mac - pointer to MAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac)
-{
-	unsigned short stat1;
-
-	if (!at91rm9200_EmacReadPhy (p_mac, PHY_LXT971_STAT2, &stat1))
-		return FALSE;
-
-	if (!(stat1 & PHY_LXT971_STAT2_LINK))	/* link status up? */
-		return FALSE;
-
-	if (stat1 & PHY_LXT971_STAT2_100BTX) {
-
-		if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-
-			/*set Emac for 100BaseTX and Full Duplex  */
-			p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-		} else {
-
-			/*set Emac for 100BaseTX and Half Duplex  */
-			p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-					~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-					| AT91C_EMAC_SPD;
-		}
-
-		return TRUE;
-
-	} else {
-
-		if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
-
-			/*set MII for 10BaseT and Full Duplex  */
-			p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
-					~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
-					| AT91C_EMAC_FD;
-		} else {
-
-			/*set MII for 10BaseT and Half Duplex  */
-			p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
-		}
-
-		return TRUE;
-	}
-
-	return FALSE;
-}
-
-
-/*
- * Name:
- *	lxt972_InitPhy
- * Description:
- *	MAC starts checking its link by using parallel detection and
- *	Autonegotiation and the same is set in the MAC configuration registers
- * Arguments:
- *	p_mac - pointer to struct AT91S_EMAC
- * Return value:
- *	TRUE - if link status set succesfully
- *	FALSE - if link status not set
- */
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac)
-{
-	UCHAR ret = TRUE;
-
-	at91rm9200_EmacEnableMDIO (p_mac);
-
-	if (!lxt972_GetLinkSpeed (p_mac)) {
-		/* Try another time */
-		ret = lxt972_GetLinkSpeed (p_mac);
-	}
-
-	/* Disable PHY Interrupts */
-	at91rm9200_EmacWritePhy (p_mac, PHY_LXT971_INT_ENABLE, 0);
-
-	at91rm9200_EmacDisableMDIO (p_mac);
-
-	return (ret);
-}
-
-
-/*
- * Name:
- *	lxt972_AutoNegotiate
- * Description:
- *	MAC Autonegotiates with the partner status of same is set in the
- *	MAC configuration registers
- * Arguments:
- *	dev - pointer to struct net_device
- * Return value:
- *	TRUE - if link status set successfully
- *	FALSE - if link status not set
- */
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
-{
-	unsigned short value;
-
-	/* Set lxt972 control register */
-	if (!at91rm9200_EmacReadPhy (p_mac, PHY_BMCR, &value))
-		return FALSE;
-
-	/* Restart Auto_negotiation  */
-	value |= PHY_BMCR_RST_NEG;
-	if (!at91rm9200_EmacWritePhy (p_mac, PHY_BMCR, &value))
-		return FALSE;
-
-	/*check AutoNegotiate complete */
-	udelay (10000);
-	at91rm9200_EmacReadPhy(p_mac, PHY_BMSR, &value);
-	if (!(value & PHY_BMSR_AUTN_COMP))
-		return FALSE;
-
-	return (lxt972_GetLinkSpeed (p_mac));
-}
-
-#endif
-
-#endif	/* CONFIG_DRIVER_ETHER */
diff --git a/cpu/arm920t/at91rm9200/reset.c b/cpu/arm920t/at91rm9200/reset.c
deleted file mode 100644
index 945ea2c..0000000
--- a/cpu/arm920t/at91rm9200/reset.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-void board_reset(void) __attribute__((__weak__));
-
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- * or toggle a GPIO pin on the AT91RM9200DK board
- */
-void reset_cpu (ulong ignored)
-{
-
-#if defined(CONFIG_AT91RM9200_USART)
-	/*shutdown the console to avoid strange chars during reset */
-	serial_exit();
-#endif
-
-	if (board_reset)
-		board_reset();
-
-	/* this is the way Linux does it */
-
-	/* FIXME:
-	 * These defines should be moved into
-	 * include/asm-arm/arch-at91rm9200/AT91RM9200.h
-	 * as soon as the whitespace fix gets applied.
-	 */
-	#define AT91C_ST_RSTEN (0x1 << 16)
-	#define AT91C_ST_EXTEN (0x1 << 17)
-	#define AT91C_ST_WDRST (0x1 <<  0)
-	#define ST_WDMR *((unsigned long *)0xfffffd08)	/* watchdog mode register */
-	#define ST_CR *((unsigned long *)0xfffffd00)	/* system clock control register */
-
-	ST_WDMR = AT91C_ST_RSTEN | AT91C_ST_EXTEN | 1 ;
-	ST_CR = AT91C_ST_WDRST;
-
-	while (1);
-	/* Never reached */
-}
diff --git a/cpu/arm920t/at91rm9200/spi.c b/cpu/arm920t/at91rm9200/spi.c
deleted file mode 100644
index f3cb5d8..0000000
--- a/cpu/arm920t/at91rm9200/spi.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/* Driver for ATMEL DataFlash support
- * Author : Hamid Ikdoumi (Atmel)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-
-#ifdef CONFIG_HAS_DATAFLASH
-#include <dataflash.h>
-
-#define AT91C_SPI_CLK	10000000	/* Max Value = 10MHz to be compliant to
-					the Continuous Array Read function */
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS	(0xC << 16)
-#define DATAFLASH_TCHS	(0x1 << 24)
-
-#define AT91C_TIMEOUT_WRDY		200000
-#define AT91C_SPI_PCS0_SERIAL_DATAFLASH	0xE	/* Chip Select 0: NPCS0%1110 */
-#define AT91C_SPI_PCS3_DATAFLASH_CARD	0x7	/* Chip Select 3: NPCS3%0111 */
-
-/*-------------------------------------------------------------------*/
-/*	SPI DataFlash Init					     */
-/*-------------------------------------------------------------------*/
-void AT91F_SpiInit(void)
-{
-	/* Configure PIOs */
-	AT91C_BASE_PIOA->PIO_ASR =
-		AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
-		AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
-		AT91C_PA2_SPCK;
-	AT91C_BASE_PIOA->PIO_PDR =
-		AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI |
-		AT91C_PA5_NPCS2 | AT91C_PA6_NPCS3 | AT91C_PA0_MISO |
-		AT91C_PA2_SPCK;
-	/* Enable CLock */
-	AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
-
-	/* Reset the SPI */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
-
-	/* Configure SPI in Master Mode with No CS selected !!! */
-	AT91C_BASE_SPI->SPI_MR =
-		AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
-
-	/* Configure CS0 and CS3 */
-	*(AT91C_SPI_CSR + 0) =
-		AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
-		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
-		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-
-	*(AT91C_SPI_CSR + 3) =
-		AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) |
-		(AT91C_SPI_DLYBCT & DATAFLASH_TCHS) |
-		((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8);
-}
-
-void AT91F_SpiEnable(int cs)
-{
-	switch(cs) {
-	case 0:	/* Configure SPI CS0 for Serial DataFlash AT45DBxx */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |=
-			((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) &
-				AT91C_SPI_PCS);
-		break;
-	case 3:	/* Configure SPI CS3 for Serial DataFlash Card */
-		/* Set up PIO SDC_TYPE to switch on DataFlash Card */
-		/* and not MMC/SDCard */
-		AT91C_BASE_PIOB->PIO_PER =
-			AT91C_PIO_PB7;	/* Set in PIO mode */
-		AT91C_BASE_PIOB->PIO_OER =
-			AT91C_PIO_PB7;	/* Configure in output */
-		/* Clear Output */
-		AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
-		/* Configure PCS */
-		AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
-		AT91C_BASE_SPI->SPI_MR |=
-			((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
-		break;
-	}
-
-	/* SPI_Enable */
-	AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; }
-
-/*---------------------------------------------------------------------------*/
-/* \fn    AT91F_SpiWrite						     */
-/* \brief Set the PDC registers for a transfert				     */
-/*---------------------------------------------------------------------------*/
-unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
-{
-	unsigned int timeout;
-
-	pDesc->state = BUSY;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-
-	/* Initialize the Transmit and Receive Pointer */
-	AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
-	AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
-
-	/* Intialize the Transmit and Receive Counters */
-	AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
-	AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
-
-	if ( pDesc->tx_data_size != 0 ) {
-		/* Initialize the Next Transmit and Next Receive Pointer */
-		AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
-		AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
-
-		/* Intialize the Next Transmit and Next Receive Counters */
-		AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
-		AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
-	}
-
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
-	timeout = 0;
-
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
-	while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) &&
-		((timeout = get_timer_masked() ) < CONFIG_SYS_SPI_WRITE_TOUT));
-	AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
-	pDesc->state = IDLE;
-
-	if (timeout >= CONFIG_SYS_SPI_WRITE_TOUT){
-		printf("Error Timeout\n\r");
-		return DATAFLASH_ERROR;
-	}
-
-	return DATAFLASH_OK;
-}
-#endif
diff --git a/cpu/arm920t/at91rm9200/timer.c b/cpu/arm920t/at91rm9200/timer.c
deleted file mode 100644
index 9c54bbe..0000000
--- a/cpu/arm920t/at91rm9200/timer.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-/*#include <asm/io.h>*/
-#include <asm/arch/hardware.h>
-/*#include <asm/proc/ptrace.h>*/
-
-/* the number of clocks per CONFIG_SYS_HZ */
-#define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK/CONFIG_SYS_HZ)
-
-/* macro to read the 16 bit timer */
-#define READ_TIMER (tmr->TC_CV & 0x0000ffff)
-AT91PS_TC tmr;
-
-static ulong timestamp;
-static ulong lastinc;
-
-int timer_init (void)
-{
-	tmr = AT91C_BASE_TC0;
-
-	/* enables TC1.0 clock */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_TC0;  /* enable clock */
-
-	*AT91C_TCB0_BCR = 0;
-	*AT91C_TCB0_BMR = AT91C_TCB_TC0XC0S_NONE | AT91C_TCB_TC1XC1S_NONE | AT91C_TCB_TC2XC2S_NONE;
-	tmr->TC_CCR = AT91C_TC_CLKDIS;
-#define AT91C_TC_CMR_CPCTRG (1 << 14)
-	/* set to MCLK/2 and restart the timer when the vlaue in TC_RC is reached */
-	tmr->TC_CMR = AT91C_TC_TIMER_DIV1_CLOCK | AT91C_TC_CMR_CPCTRG;
-
-	tmr->TC_IDR = ~0ul;
-	tmr->TC_RC = TIMER_LOAD_VAL;
-	lastinc = 0;
-	tmr->TC_CCR = AT91C_TC_SWTRG | AT91C_TC_CLKEN;
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay (unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastinc = READ_TIMER;
-	timestamp = 0;
-}
-
-ulong get_timer_raw (void)
-{
-	ulong now = READ_TIMER;
-
-	if (now >= lastinc) {
-		/* normal mode */
-		timestamp += now - lastinc;
-	} else {
-		/* we have an overflow ... */
-		timestamp += now + TIMER_LOAD_VAL - lastinc;
-	}
-	lastinc = now;
-
-	return timestamp;
-}
-
-ulong get_timer_masked (void)
-{
-	return get_timer_raw()/TIMER_LOAD_VAL;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	tmo = CONFIG_SYS_HZ_CLOCK / 1000;
-	tmo *= usec;
-	tmo /= 1000;
-
-	endtime = get_timer_raw () + tmo;
-
-	do {
-		ulong now = get_timer_raw ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-	return tbclk;
-}
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
deleted file mode 100644
index 72355dc..0000000
--- a/cpu/arm920t/at91rm9200/usb.c
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-# ifdef CONFIG_AT91RM9200
-
-#include <asm/arch/hardware.h>
-
-int usb_cpu_init(void)
-{
-	/* Enable USB host clock. */
-	*AT91C_PMC_SCER = AT91C_PMC_UHP;	/* 48MHz clock enabled for UHP */
-	*AT91C_PMC_PCER = 1 << AT91C_ID_UHP;	/* Peripheral Clock Enable Register */
-	return 0;
-}
-
-int usb_cpu_stop(void)
-{
-	/* Initialization failed */
-	*AT91C_PMC_PCDR = 1 << AT91C_ID_UHP;	/* Peripheral Clock Disable Register */
-	*AT91C_PMC_SCDR = AT91C_PMC_UHP;	/* 48MHz clock disabled for UHP */
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	return usb_cpu_stop();
-}
-
-# endif /* CONFIG_AT91RM9200 */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/config.mk b/cpu/arm920t/config.mk
deleted file mode 100644
index 8f6c1a3..0000000
--- a/cpu/arm920t/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-PLATFORM_CPPFLAGS += -march=armv4
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# =========================================================================
-PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c
deleted file mode 100644
index be82c87..0000000
--- a/cpu/arm920t/cpu.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/system.h>
-
-#ifdef CONFIG_AT91_LEGACY
-#warning Your board is using legacy AT91RM9200 SoC access. Please update!
-#endif
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-	/* flush I/D-cache */
-	cache_flush();
-
-	return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-}
diff --git a/cpu/arm920t/ep93xx/Makefile b/cpu/arm920t/ep93xx/Makefile
deleted file mode 100644
index 01a2f55..0000000
--- a/cpu/arm920t/ep93xx/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# Cirrus Logic EP93xx CPU-specific Makefile
-#
-# Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
-#
-# Copyright (C) 2004, 2005
-# Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
-#
-# Copyright (C) 2006
-# Dominic Rath <Dominic.Rath@gmx.de>
-#
-# Based on an original Makefile, which is
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 675 Mass Ave, Cambridge, MA 02139, USA.
-#
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(SOC).a
-
-COBJS   = cpu.o led.o speed.o timer.o
-SOBJS   = lowlevel_init.o
-
-SRCS    := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS    := $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:    $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/ep93xx/cpu.c b/cpu/arm920t/ep93xx/cpu.c
deleted file mode 100644
index 1abb9c6..0000000
--- a/cpu/arm920t/ep93xx/cpu.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * Cirrus Logic EP93xx CPU-specific support.
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
- *
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-/* We reset the CPU by generating a 1-->0 transition on DeviceCfg bit 31. */
-extern void reset_cpu(ulong addr)
-{
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-	uint32_t value;
-
-	/* Unlock DeviceCfg and set SWRST */
-	writel(0xAA, &syscon->sysswlock);
-	value = readl(&syscon->devicecfg);
-	value |= SYSCON_DEVICECFG_SWRST;
-	writel(value, &syscon->devicecfg);
-
-	/* Unlock DeviceCfg and clear SWRST */
-	writel(0xAA, &syscon->sysswlock);
-	value = readl(&syscon->devicecfg);
-	value &= ~SYSCON_DEVICECFG_SWRST;
-	writel(value, &syscon->devicecfg);
-
-	/* Dying... */
-	while (1)
-		; /* noop */
-}
diff --git a/cpu/arm920t/ep93xx/led.c b/cpu/arm920t/ep93xx/led.c
deleted file mode 100644
index 7e2c897..0000000
--- a/cpu/arm920t/ep93xx/led.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2010, 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/io.h>
-#include <asm/arch/ep93xx.h>
-#include <config.h>
-#include <status_led.h>
-
-static uint8_t saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-static uint32_t gpio_pin[2] = {1 << STATUS_LED_GREEN,
-			       1 << STATUS_LED_RED};
-
-inline void switch_LED_on(uint8_t led)
-{
-	register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
-
-	writel(readl(&gpio->pedr) | gpio_pin[led], &gpio->pedr);
-	saved_state[led] = STATUS_LED_ON;
-}
-
-inline void switch_LED_off(uint8_t led)
-{
-	register struct gpio_regs *gpio = (struct gpio_regs *)GPIO_BASE;
-
-	writel(readl(&gpio->pedr) & ~gpio_pin[led], &gpio->pedr);
-	saved_state[led] = STATUS_LED_OFF;
-}
-
-void red_LED_on(void)
-{
-	switch_LED_on(STATUS_LED_RED);
-}
-
-void red_LED_off(void)
-{
-	switch_LED_off(STATUS_LED_RED);
-}
-
-void green_LED_on(void)
-{
-	switch_LED_on(STATUS_LED_GREEN);
-}
-
-void green_LED_off(void)
-{
-	switch_LED_off(STATUS_LED_GREEN);
-}
-
-void __led_init(led_id_t mask, int state)
-{
-	__led_set(mask, state);
-}
-
-void __led_toggle(led_id_t mask)
-{
-	if (STATUS_LED_RED == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_RED])
-			red_LED_off();
-		else
-			red_LED_on();
-	} else if (STATUS_LED_GREEN == mask) {
-		if (STATUS_LED_ON == saved_state[STATUS_LED_GREEN])
-			green_LED_off();
-		else
-			green_LED_on();
-	}
-}
-
-void __led_set(led_id_t mask, int state)
-{
-	if (STATUS_LED_RED == mask) {
-		if (STATUS_LED_ON == state)
-			red_LED_on();
-		else
-			red_LED_off();
-	} else if (STATUS_LED_GREEN == mask) {
-		if (STATUS_LED_ON == state)
-			green_LED_on();
-		else
-			green_LED_off();
-	}
-}
diff --git a/cpu/arm920t/ep93xx/lowlevel_init.S b/cpu/arm920t/ep93xx/lowlevel_init.S
deleted file mode 100644
index a20ec89..0000000
--- a/cpu/arm920t/ep93xx/lowlevel_init.S
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Low-level initialization for EP93xx
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <version.h>
-#include <asm/arch/ep93xx.h>
-
-.globl lowlevel_init
-lowlevel_init:
-	/* backup return address */
-	ldr r1, =SYSCON_SCRATCH0
-	str lr, [r1]
-
-	/* Turn on both LEDs */
-	bl red_LED_on
-	bl green_LED_on
-
-	/* Configure flash wait states before we switch to the PLL */
-	bl flash_cfg
-
-	/* Set up PLL */
-	bl pll_cfg
-
-	/* Turn off the Green LED and leave the Red LED on */
-	bl green_LED_off
-
-	/* Setup SDRAM */
-	bl sdram_cfg
-
-	/* Turn on Green LED, Turn off the Red LED */
-	bl green_LED_on
-	bl red_LED_off
-
-	/* FIXME: we use async mode for now */
-	mrc p15, 0, r0, c1, c0, 0
-	orr r0, r0, #0xc0000000
-	mcr p15, 0, r0, c1, c0, 0
-
-	/* restore return address */
-	ldr r1, =SYSCON_SCRATCH0
-	ldr lr, [r1]
-
-	mov pc, lr
diff --git a/cpu/arm920t/ep93xx/speed.c b/cpu/arm920t/ep93xx/speed.c
deleted file mode 100644
index c83a3bb..0000000
--- a/cpu/arm920t/ep93xx/speed.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Cirrus Logic EP93xx PLL support.
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <div64.h>
-
-/*
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-
-/*
- * return the PLL output frequency
- *
- * PLL rate = CONFIG_SYS_CLK_FREQ * (X1FBD + 1) * (X2FBD + 1)
- * / (X2IPD + 1) / 2^PS
- */
-static ulong get_PLLCLK(uint32_t *pllreg)
-{
-	uint8_t i;
-	const uint32_t clkset = readl(pllreg);
-	uint64_t rate = CONFIG_SYS_CLK_FREQ;
-	rate *= ((clkset >> SYSCON_CLKSET_PLL_X1FBD1_SHIFT) & 0x1f) + 1;
-	rate *= ((clkset >> SYSCON_CLKSET_PLL_X2FBD2_SHIFT) & 0x3f) + 1;
-	do_div(rate, (clkset  & 0x1f) + 1);			/* X2IPD */
-	for (i = 0; i < ((clkset >> SYSCON_CLKSET_PLL_PS_SHIFT) & 3); i++)
-		rate >>= 1;
-
-	return (ulong)rate;
-}
-
-/* return FCLK frequency */
-ulong get_FCLK()
-{
-	const uint8_t fclk_divisors[] = { 1, 2, 4, 8, 16, 1, 1, 1 };
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
-	const uint32_t clkset1 = readl(&syscon->clkset1);
-	const uint8_t fclk_div =
-		fclk_divisors[(clkset1 >> SYSCON_CLKSET1_FCLK_DIV_SHIFT) & 7];
-	const ulong fclk_rate = get_PLLCLK(&syscon->clkset1) / fclk_div;
-
-	return fclk_rate;
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	const uint8_t hclk_divisors[] = { 1, 2, 4, 5, 6, 8, 16, 32 };
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
-	const uint32_t clkset1 = readl(&syscon->clkset1);
-	const uint8_t hclk_div =
-		hclk_divisors[(clkset1 >> SYSCON_CLKSET1_HCLK_DIV_SHIFT) & 7];
-	const ulong hclk_rate = get_PLLCLK(&syscon->clkset1) / hclk_div;
-
-	return hclk_rate;
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-	const uint8_t pclk_divisors[] = { 1, 2, 4, 8 };
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
-	const uint32_t clkset1 = readl(&syscon->clkset1);
-	const uint8_t pclk_div =
-		pclk_divisors[(clkset1 >> SYSCON_CLKSET1_PCLK_DIV_SHIFT) & 3];
-	const ulong pclk_rate = get_HCLK() / pclk_div;
-
-	return pclk_rate;
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-	struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-	ulong uclk_rate;
-
-	const uint32_t value = readl(&syscon->pwrcnt);
-	if (value & SYSCON_PWRCNT_UART_BAUD)
-		uclk_rate = CONFIG_SYS_CLK_FREQ;
-	else
-		uclk_rate = CONFIG_SYS_CLK_FREQ / 2;
-
-	return uclk_rate;
-}
diff --git a/cpu/arm920t/ep93xx/timer.c b/cpu/arm920t/ep93xx/timer.c
deleted file mode 100644
index 4a0ce4d..0000000
--- a/cpu/arm920t/ep93xx/timer.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Cirrus Logic EP93xx timer support.
- *
- * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2004, 2005
- * Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
- *
- * Based on the original intr.c Cirrus Logic EP93xx Rev D. interrupt support,
- * author unknown.
- *
- * See file CREDITS for list of people who contributed to this project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-#include <div64.h>
-
-#define TIMER_CLKSEL	(1 << 3)
-#define TIMER_ENABLE	(1 << 7)
-
-#define TIMER_FREQ			508469		/* ticks / second */
-#define TIMER_MAX_VAL			0xFFFFFFFF
-
-static struct ep93xx_timer
-{
-	unsigned long long ticks;
-	unsigned long last_read;
-} timer;
-
-static inline unsigned long long usecs_to_ticks(unsigned long usecs)
-{
-	unsigned long long ticks = (unsigned long long)usecs * TIMER_FREQ;
-	do_div(ticks, 1000 * 1000);
-
-	return ticks;
-}
-
-static inline void read_timer(void)
-{
-	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
-	const unsigned long now = TIMER_MAX_VAL - readl(&timer_regs->timer3.value);
-
-	if (now >= timer.last_read)
-		timer.ticks += now - timer.last_read;
-	else
-		/* an overflow occurred */
-		timer.ticks += TIMER_MAX_VAL - timer.last_read + now;
-
-	timer.last_read = now;
-}
-
-/*
- * Get the number of ticks (in CONFIG_SYS_HZ resolution)
- */
-unsigned long long get_ticks(void)
-{
-	unsigned long long sys_ticks;
-
-	read_timer();
-
-	sys_ticks = timer.ticks * CONFIG_SYS_HZ;
-	do_div(sys_ticks, TIMER_FREQ);
-
-	return sys_ticks;
-}
-
-unsigned long get_timer_masked(void)
-{
-	return get_ticks();
-}
-
-unsigned long get_timer(unsigned long base)
-{
-	return get_timer_masked() - base;
-}
-
-void reset_timer_masked(void)
-{
-	read_timer();
-	timer.ticks = 0;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-void __udelay(unsigned long usec)
-{
-	unsigned long long target;
-
-	read_timer();
-
-	target = timer.ticks + usecs_to_ticks(usec);
-
-	while (timer.ticks < target)
-		read_timer();
-}
-
-int timer_init(void)
-{
-	struct timer_regs *timer_regs = (struct timer_regs *)TIMER_BASE;
-
-	/* use timer 3 with 508KHz and free running, not enabled now */
-	writel(TIMER_CLKSEL, &timer_regs->timer3.control);
-
-	/* set initial timer value */
-	writel(TIMER_MAX_VAL, &timer_regs->timer3.load);
-
-	/* Enable the timer */
-	writel(TIMER_ENABLE | TIMER_CLKSEL,
-		&timer_regs->timer3.control);
-
-	reset_timer_masked();
-
-	return 0;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-unsigned long get_tbclk(void)
-{
-	return CONFIG_SYS_HZ;
-}
diff --git a/cpu/arm920t/ep93xx/u-boot.lds b/cpu/arm920t/ep93xx/u-boot.lds
deleted file mode 100644
index 737c9d8..0000000
--- a/cpu/arm920t/ep93xx/u-boot.lds
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	  cpu/arm920t/start.o	(.text)
-		/* the EP93xx expects to find the pattern 'CRUS' at 0x1000 */
-	  . = 0x1000;
-	  LONG(0x53555243)
-	  *(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(.rodata) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss : { *(.bss) }
-	_end = .;
-}
diff --git a/cpu/arm920t/imx/Makefile b/cpu/arm920t/imx/Makefile
deleted file mode 100644
index 28945e2..0000000
--- a/cpu/arm920t/imx/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-COBJS	+= generic.o
-COBJS	+= speed.o
-COBJS	+= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/imx/generic.c b/cpu/arm920t/imx/generic.c
deleted file mode 100644
index aa7c8c1..0000000
--- a/cpu/arm920t/imx/generic.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  arch/arm/mach-imx/generic.c
- *
- *  author: Sascha Hauer
- *  Created: april 20th, 2004
- *  Copyright: Synertronixx GmbH
- *
- *  Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-
-#ifdef CONFIG_IMX
-
-#include <asm/arch/imx-regs.h>
-
-void imx_gpio_mode(int gpio_mode)
-{
-	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
-	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
-	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
-	unsigned int tmp;
-
-	/* Pullup enable */
-	if(gpio_mode & GPIO_PUEN)
-		PUEN(port) |= (1<<pin);
-	else
-		PUEN(port) &= ~(1<<pin);
-
-	/* Data direction */
-	if(gpio_mode & GPIO_OUT)
-		DDIR(port) |= 1<<pin;
-	else
-		DDIR(port) &= ~(1<<pin);
-
-	/* Primary / alternate function */
-	if(gpio_mode & GPIO_AF)
-		GPR(port) |= (1<<pin);
-	else
-		GPR(port) &= ~(1<<pin);
-
-	/* use as gpio? */
-	if( ocr == 3 )
-		GIUS(port) |= (1<<pin);
-	else
-		GIUS(port) &= ~(1<<pin);
-
-	/* Output / input configuration */
-	/* FIXME: I'm not very sure about OCR and ICONF, someone
-	 * should have a look over it
-	 */
-	if(pin<16) {
-		tmp = OCR1(port);
-		tmp &= ~( 3<<(pin*2));
-		tmp |= (ocr << (pin*2));
-		OCR1(port) = tmp;
-
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA1(port) &= ~( 3<<(pin*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB1(port) &= ~( 3<<(pin*2));
-	} else {
-		tmp = OCR2(port);
-		tmp &= ~( 3<<((pin-16)*2));
-		tmp |= (ocr << ((pin-16)*2));
-		OCR2(port) = tmp;
-
-		if( gpio_mode &	GPIO_AOUT )
-			ICONFA2(port) &= ~( 3<<((pin-16)*2));
-		if( gpio_mode &	GPIO_BOUT )
-			ICONFB2(port) &= ~( 3<<((pin-16)*2));
-	}
-}
-
-#endif /* CONFIG_IMX */
diff --git a/cpu/arm920t/imx/speed.c b/cpu/arm920t/imx/speed.c
deleted file mode 100644
index 1e29698..0000000
--- a/cpu/arm920t/imx/speed.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- *
- * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#if defined (CONFIG_IMX)
-
-#include <asm/arch/imx-regs.h>
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- * SH FIXME: 16780000 in our case
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-ulong get_systemPLLCLK(void)
-{
-	/* FIXME: We assume System_SEL = 0 here */
-	u32 spctl0 = SPCTL0;
-	u32 mfi = (spctl0 >> 10) & 0xf;
-	u32 mfn = spctl0 & 0x3f;
-	u32 mfd = (spctl0 >> 16) & 0x3f;
-	u32 pd =  (spctl0 >> 26) & 0xf;
-
-	mfi = mfi<=5 ? 5 : mfi;
-
-	return (2*(CONFIG_SYSPLL_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
-}
-
-ulong get_mcuPLLCLK(void)
-{
-	/* FIXME: We assume System_SEL = 0 here */
-	u32 mpctl0 = MPCTL0;
-	u32 mfi = (mpctl0 >> 10) & 0xf;
-	u32 mfn = mpctl0 & 0x3f;
-	u32 mfd = (mpctl0 >> 16) & 0x3f;
-	u32 pd =  (mpctl0 >> 26) & 0xf;
-
-	mfi = mfi<=5 ? 5 : mfi;
-
-	return (2*(CONFIG_SYS_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
-}
-
-ulong get_FCLK(void)
-{
-	return (( CSCR>>15)&1) ? get_mcuPLLCLK()>>1 : get_mcuPLLCLK();
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	u32 bclkdiv = (( CSCR >> 10 ) & 0xf) + 1;
-	printf("bclkdiv: %d\n", bclkdiv);
-	return get_systemPLLCLK() / bclkdiv;
-}
-
-/* return BCLK frequency */
-ulong get_BCLK(void)
-{
-	return get_HCLK();
-}
-
-ulong get_PERCLK1(void)
-{
-	return get_systemPLLCLK() / (((PCDR) & 0xf)+1);
-}
-
-ulong get_PERCLK2(void)
-{
-	return get_systemPLLCLK() / (((PCDR>>4) & 0xf)+1);
-}
-
-ulong get_PERCLK3(void)
-{
-	return get_systemPLLCLK() / (((PCDR>>16) & 0x7f)+1);
-}
-
-#endif /* defined (CONFIG_IMX) */
diff --git a/cpu/arm920t/imx/timer.c b/cpu/arm920t/imx/timer.c
deleted file mode 100644
index b06b518..0000000
--- a/cpu/arm920t/imx/timer.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#if defined (CONFIG_IMX)
-
-#include <asm/arch/imx-regs.h>
-
-int timer_init (void)
-{
-	int i;
-	/* setup GP Timer 1 */
-	TCTL1 = TCTL_SWR;
-	for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
-	TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
-	TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
-
-	reset_timer_masked();
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer (ulong t)
-{
-	/* nop */
-}
-
-void reset_timer_masked (void)
-{
-	TCTL1 &= ~TCTL_TEN;
-	TCTL1 |= TCTL_TEN; /* Enable timer */
-}
-
-ulong get_timer_masked (void)
-{
-	return TCN1;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong endtime = get_timer_masked() + usec;
-	signed long diff;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-void __udelay (unsigned long usec)
-{
-	udelay_masked(usec);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = CONFIG_SYS_HZ;
-
-	return tbclk;
-}
-
-/*
- * Reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu (ulong ignored)
-{
-	/* Disable watchdog and set Time-Out field to 0 */
-	WCR = 0x00000000;
-
-	/* Write Service Sequence */
-	WSR = 0x00005555;
-	WSR = 0x0000AAAA;
-
-	/* Enable watchdog */
-	WCR = 0x00000001;
-
-	while (1);
-	/*NOTREACHED*/
-}
-
-#endif /* defined (CONFIG_IMX) */
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
deleted file mode 100644
index 561083e..0000000
--- a/cpu/arm920t/interrupts.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/proc-armv/ptrace.h>
-
-#if defined (CONFIG_ARCH_INTEGRATOR)
-void do_irq (struct pt_regs *pt_regs)
-{
-	/* ASSUMED to be a timer interrupt  */
-	/* Just clear it - count handled in */
-	/* integratorap.c                   */
-	*(volatile ulong *)(CONFIG_SYS_TIMERBASE + 0x0C) = 0;
-}
-#endif
diff --git a/cpu/arm920t/ks8695/Makefile b/cpu/arm920t/ks8695/Makefile
deleted file mode 100644
index f53fdc2..0000000
--- a/cpu/arm920t/ks8695/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-SOBJS	= lowlevel_init.o
-
-COBJS	= timer.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/ks8695/lowlevel_init.S b/cpu/arm920t/ks8695/lowlevel_init.S
deleted file mode 100644
index e9f1227..0000000
--- a/cpu/arm920t/ks8695/lowlevel_init.S
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- *  lowlevel_init.S - basic hardware initialization for the KS8695 CPU
- *
- *  Copyright (c) 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/platform.h>
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- *************************************************************************
- *
- * Handy dandy macros
- *
- *************************************************************************
- */
-
-/* Delay a bit */
-.macro DELAY_FOR cycles, reg0
-	ldr     \reg0, =\cycles
-	subs    \reg0, \reg0, #1
-	subne   pc,  pc, #0xc
-.endm
-
-/*
- *************************************************************************
- *
- * Some local storage.
- *
- *************************************************************************
- */
-
-/* Should we boot with an interactive console or not */
-.globl serial_console
-
-/*
- *************************************************************************
- *
- * Raw hardware initialization code. The important thing is to get
- * SDRAM setup and running. We do some other basic things here too,
- * like getting the PLL set for high speed, and init the LEDs.
- *
- *************************************************************************
- */
-
-.globl lowlevel_init
-lowlevel_init:
-
-#if DEBUG
-	/*
-	 * enable UART for early debug trace
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
-	mov	r2, #0xd9
-	str	r2, [r1]		/* 115200 baud */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
-	mov	r2, #0x03
-	str	r2, [r1]		/* 8 data bits, no parity, 1 stop */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
-	mov	r2, #0x41
-	str	r2, [r1]		/* write 'A' */
-#endif
-#if DEBUG
-	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
-	mov	r2, #0x42
-	str	r2, [r1]
-#endif
-
-	/*
-	 * remap the memory and flash regions. we want to end up with
-	 * ram from address 0, and flash at 32MB.
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL0)
-	ldr	r2, =0xbfc00040
-	str	r2, [r1]		/* large flash map */
-	ldr	pc, =(highflash+0x02000000-0x00f00000)	/* jump to high flash address */
-highflash:
-	ldr	r2, =0x8fe00040
-	str	r2, [r1]		/* remap flash range */
-
-	/*
-	 * remap the second select region to the 4MB immediately after
-	 * the first region. This way if you have a larger flash (say 8Mb)
-	 * then you can have it all mapped nicely. Has no effect if you
-	 * only have a 4Mb or smaller flash.
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_CTRL1)
-	ldr	r2, =0x9fe40040
-	str	r2, [r1]		/* remap flash2 region, contiguous */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
-	ldr	r2, =0x30000005
-	str	r2, [r1]		/* enable both flash selects */
-
-#ifdef CONFIG_CM41xx
-	/*
-	 * map the second flash chip, using the external IO lines.
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_IO_CTRL0)
-	ldr	r2, =0xafe80b6d
-	str	r2, [r1]		/* remap io0 region, contiguous */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_IO_CTRL1)
-	ldr	r2, =0xbfec0b6d
-	str	r2, [r1]		/* remap io1 region, contiguous */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_MEM_GENERAL)
-	ldr	r2, =0x30050005
-	str	r2, [r1]		/* enable second flash */
-#endif
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL0)
-#if (PHYS_SDRAM_1_SIZE == 0x02000000)
-	ldr	r2, =0x7fc0000e		/* 32MB */
-#else
-	ldr	r2, =0x3fc0000e		/* 16MB */
-#endif
-	str	r2, [r1]		/* configure sdram bank0 setup */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_CTRL1)
-	mov	r2, #0
-	str	r2, [r1]		/* configure sdram bank1 setup */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_GENERAL)
-	ldr	r2, =0x0000000a
-	str	r2, [r1]		/* set RAS/CAS timing */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
-	ldr	r2, =0x00030000
-	str	r2, [r1]		/* send NOP command */
-	DELAY_FOR 0x100, r0
-	ldr	r2, =0x00010000
-	str	r2, [r1]		/* send PRECHARGE-ALL */
-	DELAY_FOR 0x100, r0
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_REFRESH)
-	ldr	r2, =0x00000020
-	str	r2, [r1]		/* set for fast refresh */
-	DELAY_FOR 0x100, r0
-	ldr	r2, =0x00000190
-	str	r2, [r1]		/* set normal refresh timing */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SDRAM_BUFFER)
-	ldr	r2, =0x00020033
-	str	r2, [r1]		/* send mode command */
-	DELAY_FOR 0x100, r0
-	ldr	r2, =0x01f00000
-	str	r2, [r1]		/* enable sdram fifos */
-
-	/*
-	 * set pll to top speed
-	 */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SYSTEN_BUS_CLOCK)
-	mov	r2, #0
-	str	r2, [r1]		/* set pll clock to 166MHz */
-
-	ldr	r1, =(KS8695_IO_BASE+KS8695_SWITCH_CTRL0)
-	ldr	r2, [r1]		/* Get switch ctrl0 register       */
-	and	r2, r2, #0x0fc00000	/* Mask out LED control bits       */
-	orr	r2, r2, #0x01800000	/* Set Link/activity/speed actions */
-	str	r2, [r1]
-
-#ifdef CONFIG_CM4008
-	ldr	r1, =(KS8695_IO_BASE+KS8695_GPIO_MODE)
-	ldr	r2, =0x0000fe30
-	str	r2, [r1]		/* enable LED's as outputs	    */
-	ldr	r1, =(KS8695_IO_BASE+KS8695_GPIO_DATA)
-	ldr	r2, =0x0000fe20
-	str	r2, [r1]		/* turn on power LED		    */
-#endif
-#if defined(CONFIG_CM4008) || defined(CONFIG_CM41xx)
-	ldr	r2, [r1]		/* get current GPIO input data	    */
-	tst	r2, #0x8		/* check if "erase" depressed	    */
-	beq	nobutton
-	mov	r2, #0			/* be quiet on boot, no console	    */
-	ldr	r1, =serial_console
-	str	r2, [r1]
-nobutton:
-#endif
-
-	add	lr, lr, #0x02000000	/* flash is now mapped high */
-	add	ip, ip, #0x02000000	/* this is a hack */
-	mov	pc, lr			/* all done, return */
-
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
diff --git a/cpu/arm920t/ks8695/timer.c b/cpu/arm920t/ks8695/timer.c
deleted file mode 100644
index 886e370..0000000
--- a/cpu/arm920t/ks8695/timer.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * (C) Copyright 2004-2005, Greg Ungerer <greg.ungerer@opengear.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/platform.h>
-
-/*
- * Handy KS8695 register access functions.
- */
-#define	ks8695_read(a)    *((volatile ulong *) (KS8695_IO_BASE + (a)))
-#define	ks8695_write(a,v) *((volatile ulong *) (KS8695_IO_BASE + (a))) = (v)
-
-ulong timer_ticks;
-
-int timer_init (void)
-{
-	reset_timer();
-
-	return 0;
-}
-
-/*
- * Initial timer set constants. Nothing complicated, just set for a 1ms
- * tick.
- */
-#define	TIMER_INTERVAL	(TICKS_PER_uSEC * mSEC_1)
-#define	TIMER_COUNT	(TIMER_INTERVAL / 2)
-#define	TIMER_PULSE	TIMER_COUNT
-
-void reset_timer_masked(void)
-{
-	/* Set the hadware timer for 1ms */
-	ks8695_write(KS8695_TIMER1, TIMER_COUNT);
-	ks8695_write(KS8695_TIMER1_PCOUNT, TIMER_PULSE);
-	ks8695_write(KS8695_TIMER_CTRL, 0x2);
-	timer_ticks = 0;
-}
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer_masked(void)
-{
-	/* Check for timer wrap */
-	if (ks8695_read(KS8695_INT_STATUS) & KS8695_INTMASK_TIMERINT1) {
-		/* Clear interrupt condition */
-		ks8695_write(KS8695_INT_STATUS, KS8695_INTMASK_TIMERINT1);
-		timer_ticks++;
-	}
-	return timer_ticks;
-}
-
-ulong get_timer(ulong base)
-{
-       return (get_timer_masked() - base);
-}
-
-void set_timer(ulong t)
-{
-	timer_ticks = t;
-}
-
-void __udelay(ulong usec)
-{
-	ulong start = get_timer_masked();
-	ulong end;
-
-	/* Only 1ms resolution :-( */
-	end = usec / 1000;
-	while (get_timer(start) < end)
-		;
-}
-
-void reset_cpu (ulong ignored)
-{
-	ulong tc;
-
-	/* Set timer0 to watchdog, and let it timeout */
-	tc = ks8695_read(KS8695_TIMER_CTRL) & 0x2;
-	ks8695_write(KS8695_TIMER_CTRL, tc);
-	ks8695_write(KS8695_TIMER0, ((10 << 8) | 0xff));
-	ks8695_write(KS8695_TIMER_CTRL, (tc | 0x1));
-
-	/* Should only wait here till watchdog resets */
-	for (;;)
-		;
-}
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
deleted file mode 100644
index 7e8d6ed..0000000
--- a/cpu/arm920t/s3c24x0/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).a
-
-COBJS-$(CONFIG_USE_IRQ) += interrupts.o
-COBJS-y	+= speed.o
-COBJS-y	+= timer.o
-COBJS-y	+= usb.o
-COBJS-y	+= usb_ohci.o
-
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c
deleted file mode 100644
index 879fda6..0000000
--- a/cpu/arm920t/s3c24x0/interrupts.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/proc-armv/ptrace.h>
-
-void do_irq (struct pt_regs *pt_regs)
-{
-	struct s3c24x0_interrupt *irq = s3c24x0_get_base_interrupt();
-	u_int32_t intpnd = readl(&irq->INTPND);
-
-}
diff --git a/cpu/arm920t/s3c24x0/speed.c b/cpu/arm920t/s3c24x0/speed.c
deleted file mode 100644
index b13283a..0000000
--- a/cpu/arm920t/s3c24x0/speed.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This code should work for both the S3C2400 and the S3C2410
- * as they seem to have the same PLL and clock machinery inside.
- * The different address mapping is handled by the s3c24xx.h files below.
- */
-
-#include <common.h>
-#ifdef CONFIG_S3C24X0
-
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#define MPLL 0
-#define UPLL 1
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-static ulong get_PLLCLK(int pllreg)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	ulong r, m, p, s;
-
-	if (pllreg == MPLL)
-		r = readl(&clk_power->MPLLCON);
-	else if (pllreg == UPLL)
-		r = readl(&clk_power->UPLLCON);
-	else
-		hang();
-
-	m = ((r & 0xFF000) >> 12) + 8;
-	p = ((r & 0x003F0) >> 4) + 2;
-	s = r & 0x3;
-
-	return (CONFIG_SYS_CLK_FREQ * m) / (p << s);
-}
-
-/* return FCLK frequency */
-ulong get_FCLK(void)
-{
-	return get_PLLCLK(MPLL);
-}
-
-/* return HCLK frequency */
-ulong get_HCLK(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
-	return (readl(&clk_power->CLKDIVN) & 2) ? get_FCLK() / 2 : get_FCLK();
-}
-
-/* return PCLK frequency */
-ulong get_PCLK(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
-	return (readl(&clk_power->CLKDIVN) & 1) ? get_HCLK() / 2 : get_HCLK();
-}
-
-/* return UCLK frequency */
-ulong get_UCLK(void)
-{
-	return get_PLLCLK(UPLL);
-}
-
-#endif /* CONFIG_S3C24X0 */
diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c
deleted file mode 100644
index 7d47354..0000000
--- a/cpu/arm920t/s3c24x0/timer.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#ifdef CONFIG_S3C24X0
-
-#include <asm/io.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-int timer_load_val = 0;
-static ulong timer_clk;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
-	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
-
-	return readl(&timers->TCNTO4) & 0xffff;
-}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init(void)
-{
-	struct s3c24x0_timers *timers = s3c24x0_get_base_timers();
-	ulong tmr;
-
-	/* use PWM Timer 4 because it has no output */
-	/* prescaler for Timer 4 is 16 */
-	writel(0x0f00, &timers->TCFG0);
-	if (timer_load_val == 0) {
-		/*
-		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
-		 * (default) and prescaler = 16. Should be 10390
-		 * @33.25MHz and 15625 @ 50 MHz
-		 */
-		timer_load_val = get_PCLK() / (2 * 16 * 100);
-		timer_clk = get_PCLK() / (2 * 16);
-	}
-	/* load value for 10 ms timeout */
-	lastdec = timer_load_val;
-	writel(timer_load_val, &timers->TCNTB4);
-	/* auto load, manual update of Timer 4 */
-	tmr = (readl(&timers->TCON) & ~0x0700000) | 0x0600000;
-	writel(tmr, &timers->TCON);
-	/* auto load, start Timer 4 */
-	tmr = (tmr & ~0x0700000) | 0x0500000;
-	writel(tmr, &timers->TCON);
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer(void)
-{
-	reset_timer_masked();
-}
-
-ulong get_timer(ulong base)
-{
-	return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
-	timestamp = t;
-}
-
-void __udelay (unsigned long usec)
-{
-	ulong tmo;
-	ulong start = get_ticks();
-
-	tmo = usec / 1000;
-	tmo *= (timer_load_val * 100);
-	tmo /= 1000;
-
-	while ((ulong) (get_ticks() - start) < tmo)
-		/*NOP*/;
-}
-
-void reset_timer_masked(void)
-{
-	/* reset time */
-	lastdec = READ_TIMER();
-	timestamp = 0;
-}
-
-ulong get_timer_masked(void)
-{
-	ulong tmr = get_ticks();
-
-	return tmr / (timer_clk / CONFIG_SYS_HZ);
-}
-
-void udelay_masked(unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= (timer_load_val * 100);
-		tmo /= 1000;
-	} else {
-		tmo = usec * (timer_load_val * 100);
-		tmo /= (1000 * 1000);
-	}
-
-	endtime = get_ticks() + tmo;
-
-	do {
-		ulong now = get_ticks();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	ulong now = READ_TIMER();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
-	ulong tbclk;
-
-#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
-	tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SBC2410X) || \
-      defined(CONFIG_SMDK2410) || \
-      defined(CONFIG_VCMA9)
-	tbclk = CONFIG_SYS_HZ;
-#else
-#	error "tbclk not configured"
-#endif
-
-	return tbclk;
-}
-
-/*
- * reset the cpu by setting up the watchdog timer and let him time out
- */
-void reset_cpu(ulong ignored)
-{
-	struct s3c24x0_watchdog *watchdog;
-
-#ifdef CONFIG_TRAB
-	extern void disable_vfd(void);
-
-	disable_vfd();
-#endif
-
-	watchdog = s3c24x0_get_base_watchdog();
-
-	/* Disable watchdog */
-	writel(0x0000, &watchdog->WTCON);
-
-	/* Initialize watchdog timer count register */
-	writel(0x0001, &watchdog->WTCNT);
-
-	/* Enable watchdog timer; assert reset at timer timeout */
-	writel(0x0021, &watchdog->WTCON);
-
-	while (1)
-		/* loop forever and wait for reset to happen */;
-
-	/*NOTREACHED*/
-}
-
-#endif /* CONFIG_S3C24X0 */
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
deleted file mode 100644
index e468ed0..0000000
--- a/cpu/arm920t/s3c24x0/usb.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && \
-    defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-    defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-
-int usb_cpu_init(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
-	/*
-	 * Set the 48 MHz UPLL clocking. Values are taken from
-	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
-	 */
-	writel((40 << 12) + (1 << 4) + 2, &clk_power->UPLLCON);
-	/* 1 = use pads related USB for USB host */
-	writel(readl(&gpio->MISCCR) | 0x8, &gpio->MISCCR);
-
-	/*
-	 * Enable USB host clock.
-	 */
-	writel(readl(&clk_power->CLKCON) | (1 << 4), &clk_power->CLKCON);
-
-	return 0;
-}
-
-int usb_cpu_stop(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	/* may not want to do this */
-	writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	writel(readl(&clk_power->CLKCON) & ~(1 << 4), &clk_power->CLKCON);
-	return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI_NEW) && \
-	   defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-	   defined(CONFIG_S3C24X0) */
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c
deleted file mode 100644
index 5aa8d64..0000000
--- a/cpu/arm920t/s3c24x0/usb_ohci.c
+++ /dev/null
@@ -1,1755 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the S3C2400.
- *
- * (C) Copyright 2003
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- *     (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-/* #include <pci.h> no PCI on the S3C24X0 */
-
-#if defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#define OHCI_USE_NPS		/* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG	/* not always helpful */
-
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define	OHCI_CONTROL_INIT \
-	(OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define min_t(type, x, y) \
-	({ type __x = (x); type __y = (y); __x < __y ? __x : __y; })
-
-#undef DEBUG
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#undef SHOW_INFO
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-/* global struct ohci */
-static struct ohci gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-struct urb_priv urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect.  AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
-	u32 temp = readl (&hc->regs->roothub.register); \
-	if (hc->flags & OHCI_QUIRK_AMD756) \
-		while (temp & mask) \
-			temp = readl (&hc->regs->roothub.register); \
-	temp; })
-
-static u32 roothub_a(struct ohci *hc)
-{
-	return read_roothub(hc, a, 0xfc0fe000);
-}
-static inline u32 roothub_b(struct ohci *hc)
-{
-	return readl(&hc->regs->roothub.b);
-}
-static inline u32 roothub_status(struct ohci *hc)
-{
-	return readl(&hc->regs->roothub.status);
-}
-static u32 roothub_portstatus(struct ohci *hc, int i)
-{
-	return read_roothub(hc, portstatus[i], 0xffe0fce0);
-}
-
-/* forward declaration */
-static int hc_interrupt(void);
-static void td_submit_job(struct usb_device *dev, unsigned long pipe,
-			  void *buffer, int transfer_len,
-			  struct devrequest *setup, struct urb_priv *urb,
-			  int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv(struct urb_priv *urb)
-{
-	int i;
-	int last;
-	struct td *td;
-
-	last = urb->length - 1;
-	if (last >= 0) {
-		for (i = 0; i <= last; i++) {
-			td = urb->td[i];
-			if (td) {
-				td->usb_dev = NULL;
-				urb->td[i] = NULL;
-			}
-		}
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number(struct usb_device *dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print(struct usb_device *dev, unsigned long pipe, void *buffer,
-		      int transfer_len, struct devrequest *setup, char *str,
-		      int small)
-{
-	struct urb_priv *purb = &urb_priv;
-
-	dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
-	    str,
-	    sohci_get_current_frame_number(dev),
-	    usb_pipedevice(pipe),
-	    usb_pipeendpoint(pipe),
-	    usb_pipeout(pipe) ? 'O' : 'I',
-	    usb_pipetype(pipe) < 2 ?
-		(usb_pipeint(pipe) ? "INTR" : "ISOC") :
-		(usb_pipecontrol(pipe) ? "CTRL" : "BULK"),
-	    purb->actual_length, transfer_len, dev->status);
-#ifdef	OHCI_VERBOSE_DEBUG
-	if (!small) {
-		int i, len;
-
-		if (usb_pipecontrol(pipe)) {
-			printf(__FILE__ ": cmd(8):");
-			for (i = 0; i < 8; i++)
-				printf(" %02x", ((__u8 *) setup)[i]);
-			printf("\n");
-		}
-		if (transfer_len > 0 && buffer) {
-			printf(__FILE__ ": data(%d/%d):",
-			       purb->actual_length, transfer_len);
-			len = usb_pipeout(pipe) ?
-			    transfer_len : purb->actual_length;
-			for (i = 0; i < 16 && i < len; i++)
-				printf(" %02x", ((__u8 *) buffer)[i]);
-			printf("%s\n", i < len ? "..." : "");
-		}
-	}
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the
-   int ed tree inclusive iso eds*/
-void ep_print_int_eds(struct ohci *ohci, char *str)
-{
-	int i, j;
-	__u32 *ed_p;
-	for (i = 0; i < 32; i++) {
-		j = 5;
-		ed_p = &(ohci->hcca->int_table[i]);
-		if (*ed_p == 0)
-			continue;
-		printf(__FILE__ ": %s branch int %2d(%2x):", str, i, i);
-		while (*ed_p != 0 && j--) {
-			struct ed *ed = (struct ed *) m32_swap(ed_p);
-			printf(" ed: %4x;", ed->hwINFO);
-			ed_p = &ed->hwNextED;
-		}
-		printf("\n");
-	}
-}
-
-static void ohci_dump_intr_mask(char *label, __u32 mask)
-{
-	dbg("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
-	    label,
-	    mask,
-	    (mask & OHCI_INTR_MIE) ? " MIE" : "",
-	    (mask & OHCI_INTR_OC) ? " OC" : "",
-	    (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
-	    (mask & OHCI_INTR_FNO) ? " FNO" : "",
-	    (mask & OHCI_INTR_UE) ? " UE" : "",
-	    (mask & OHCI_INTR_RD) ? " RD" : "",
-	    (mask & OHCI_INTR_SF) ? " SF" : "",
-	    (mask & OHCI_INTR_WDH) ? " WDH" : "",
-	    (mask & OHCI_INTR_SO) ? " SO" : "");
-}
-
-static void maybe_print_eds(char *label, __u32 value)
-{
-	struct ed *edp = (struct ed *) value;
-
-	if (value) {
-		dbg("%s %08x", label, value);
-		dbg("%08x", edp->hwINFO);
-		dbg("%08x", edp->hwTailP);
-		dbg("%08x", edp->hwHeadP);
-		dbg("%08x", edp->hwNextED);
-	}
-}
-
-static char *hcfs2string(int state)
-{
-	switch (state) {
-	case OHCI_USB_RESET:
-		return "reset";
-	case OHCI_USB_RESUME:
-		return "resume";
-	case OHCI_USB_OPER:
-		return "operational";
-	case OHCI_USB_SUSPEND:
-		return "suspend";
-	}
-	return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status(struct ohci *controller)
-{
-	struct ohci_regs *regs = controller->regs;
-	__u32 temp;
-
-	temp = readl(&regs->revision) & 0xff;
-	if (temp != 0x10)
-		dbg("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
-	temp = readl(&regs->control);
-	dbg("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
-	    (temp & OHCI_CTRL_RWE) ? " RWE" : "",
-	    (temp & OHCI_CTRL_RWC) ? " RWC" : "",
-	    (temp & OHCI_CTRL_IR) ? " IR" : "",
-	    hcfs2string(temp & OHCI_CTRL_HCFS),
-	    (temp & OHCI_CTRL_BLE) ? " BLE" : "",
-	    (temp & OHCI_CTRL_CLE) ? " CLE" : "",
-	    (temp & OHCI_CTRL_IE) ? " IE" : "",
-	    (temp & OHCI_CTRL_PLE) ? " PLE" : "", temp & OHCI_CTRL_CBSR);
-
-	temp = readl(&regs->cmdstatus);
-	dbg("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
-	    (temp & OHCI_SOC) >> 16,
-	    (temp & OHCI_OCR) ? " OCR" : "",
-	    (temp & OHCI_BLF) ? " BLF" : "",
-	    (temp & OHCI_CLF) ? " CLF" : "", (temp & OHCI_HCR) ? " HCR" : "");
-
-	ohci_dump_intr_mask("intrstatus", readl(&regs->intrstatus));
-	ohci_dump_intr_mask("intrenable", readl(&regs->intrenable));
-
-	maybe_print_eds("ed_periodcurrent", readl(&regs->ed_periodcurrent));
-
-	maybe_print_eds("ed_controlhead", readl(&regs->ed_controlhead));
-	maybe_print_eds("ed_controlcurrent", readl(&regs->ed_controlcurrent));
-
-	maybe_print_eds("ed_bulkhead", readl(&regs->ed_bulkhead));
-	maybe_print_eds("ed_bulkcurrent", readl(&regs->ed_bulkcurrent));
-
-	maybe_print_eds("donehead", readl(&regs->donehead));
-}
-
-static void ohci_dump_roothub(struct ohci *controller, int verbose)
-{
-	__u32 temp, ndp, i;
-
-	temp = roothub_a(controller);
-	ndp = (temp & RH_A_NDP);
-
-	if (verbose) {
-		dbg("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
-		    ((temp & RH_A_POTPGT) >> 24) & 0xff,
-		    (temp & RH_A_NOCP) ? " NOCP" : "",
-		    (temp & RH_A_OCPM) ? " OCPM" : "",
-		    (temp & RH_A_DT) ? " DT" : "",
-		    (temp & RH_A_NPS) ? " NPS" : "",
-		    (temp & RH_A_PSM) ? " PSM" : "", ndp);
-		temp = roothub_b(controller);
-		dbg("roothub.b: %08x PPCM=%04x DR=%04x",
-		    temp, (temp & RH_B_PPCM) >> 16, (temp & RH_B_DR)
-		    );
-		temp = roothub_status(controller);
-		dbg("roothub.status: %08x%s%s%s%s%s%s",
-		    temp,
-		    (temp & RH_HS_CRWE) ? " CRWE" : "",
-		    (temp & RH_HS_OCIC) ? " OCIC" : "",
-		    (temp & RH_HS_LPSC) ? " LPSC" : "",
-		    (temp & RH_HS_DRWE) ? " DRWE" : "",
-		    (temp & RH_HS_OCI) ? " OCI" : "",
-		    (temp & RH_HS_LPS) ? " LPS" : "");
-	}
-
-	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus(controller, i);
-		dbg("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
-		    i,
-		    temp,
-		    (temp & RH_PS_PRSC) ? " PRSC" : "",
-		    (temp & RH_PS_OCIC) ? " OCIC" : "",
-		    (temp & RH_PS_PSSC) ? " PSSC" : "",
-		    (temp & RH_PS_PESC) ? " PESC" : "",
-		    (temp & RH_PS_CSC) ? " CSC" : "",
-		    (temp & RH_PS_LSDA) ? " LSDA" : "",
-		    (temp & RH_PS_PPS) ? " PPS" : "",
-		    (temp & RH_PS_PRS) ? " PRS" : "",
-		    (temp & RH_PS_POCI) ? " POCI" : "",
-		    (temp & RH_PS_PSS) ? " PSS" : "",
-		    (temp & RH_PS_PES) ? " PES" : "",
-		    (temp & RH_PS_CCS) ? " CCS" : "");
-	}
-}
-
-static void ohci_dump(struct ohci *controller, int verbose)
-{
-	dbg("OHCI controller usb-%s state", controller->slot_name);
-
-	/* dumps some of the state we know about */
-	ohci_dump_status(controller);
-	if (verbose)
-		ep_print_int_eds(controller, "hcca");
-	dbg("hcca frame #%04x", controller->hcca->frame_no);
-	ohci_dump_roothub(controller, 1);
-}
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
-		     int transfer_len, struct devrequest *setup, int interval)
-{
-	struct ohci *ohci;
-	struct ed *ed;
-	struct urb_priv *purb_priv;
-	int i, size = 0;
-
-	ohci = &gohci;
-
-	/* when controller's hung, permit only roothub cleanup attempts
-	 * such as powering down ports */
-	if (ohci->disabled) {
-		err("sohci_submit_job: EPIPE");
-		return -1;
-	}
-
-	/* if we have an unfinished URB from previous transaction let's
-	 * fail and scream as quickly as possible so as not to corrupt
-	 * further communication */
-	if (!urb_finished) {
-		err("sohci_submit_job: URB NOT FINISHED");
-		return -1;
-	}
-	/* we're about to begin a new transaction here
-	   so mark the URB unfinished */
-	urb_finished = 0;
-
-	/* every endpoint has a ed, locate and fill it */
-	ed = ep_add_ed(dev, pipe);
-	if (!ed) {
-		err("sohci_submit_job: ENOMEM");
-		return -1;
-	}
-
-	/* for the private part of the URB we need the number of TDs (size) */
-	switch (usb_pipetype(pipe)) {
-	case PIPE_BULK:
-		/* one TD for every 4096 Byte */
-		size = (transfer_len - 1) / 4096 + 1;
-		break;
-	case PIPE_CONTROL:
-		/* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
-		size = (transfer_len == 0) ? 2 : (transfer_len - 1) / 4096 + 3;
-		break;
-	}
-
-	if (size >= (N_URB_TD - 1)) {
-		err("need %d TDs, only have %d", size, N_URB_TD);
-		return -1;
-	}
-	purb_priv = &urb_priv;
-	purb_priv->pipe = pipe;
-
-	/* fill the private part of the URB */
-	purb_priv->length = size;
-	purb_priv->ed = ed;
-	purb_priv->actual_length = 0;
-
-	/* allocate the TDs */
-	/* note that td[0] was allocated in ep_add_ed */
-	for (i = 0; i < size; i++) {
-		purb_priv->td[i] = td_alloc(dev);
-		if (!purb_priv->td[i]) {
-			purb_priv->length = i;
-			urb_free_priv(purb_priv);
-			err("sohci_submit_job: ENOMEM");
-			return -1;
-		}
-	}
-
-	if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
-		urb_free_priv(purb_priv);
-		err("sohci_submit_job: EINVAL");
-		return -1;
-	}
-
-	/* link the ed into a chain if is not already */
-	if (ed->state != ED_OPER)
-		ep_link(ohci, ed);
-
-	/* fill the TDs and link it to the ed */
-	td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv,
-		      interval);
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number(struct usb_device *usb_dev)
-{
-	struct ohci *ohci = &gohci;
-
-	return m16_swap(ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link(struct ohci *ohci, struct ed *edi)
-{
-	struct ed *ed = edi;
-
-	ed->state = ED_OPER;
-
-	switch (ed->type) {
-	case PIPE_CONTROL:
-		ed->hwNextED = 0;
-		if (ohci->ed_controltail == NULL) {
-			writel((u32)ed, &ohci->regs->ed_controlhead);
-		} else {
-			ohci->ed_controltail->hwNextED = (__u32) m32_swap(ed);
-		}
-		ed->ed_prev = ohci->ed_controltail;
-		if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
-		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
-			ohci->hc_control |= OHCI_CTRL_CLE;
-			writel(ohci->hc_control, &ohci->regs->control);
-		}
-		ohci->ed_controltail = edi;
-		break;
-
-	case PIPE_BULK:
-		ed->hwNextED = 0;
-		if (ohci->ed_bulktail == NULL) {
-			writel((u32)ed, &ohci->regs->ed_bulkhead);
-		} else {
-			ohci->ed_bulktail->hwNextED = (__u32) m32_swap(ed);
-		}
-		ed->ed_prev = ohci->ed_bulktail;
-		if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
-		    !ohci->ed_rm_list[1] && !ohci->sleeping) {
-			ohci->hc_control |= OHCI_CTRL_BLE;
-			writel(ohci->hc_control, &ohci->regs->control);
-		}
-		ohci->ed_bulktail = edi;
-		break;
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink(struct ohci *ohci, struct ed *ed)
-{
-	struct ed *next;
-	ed->hwINFO |= m32_swap(OHCI_ED_SKIP);
-
-	switch (ed->type) {
-	case PIPE_CONTROL:
-		if (ed->ed_prev == NULL) {
-			if (!ed->hwNextED) {
-				ohci->hc_control &= ~OHCI_CTRL_CLE;
-				writel(ohci->hc_control, &ohci->regs->control);
-			}
-			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
-			       &ohci->regs->ed_controlhead);
-		} else {
-			ed->ed_prev->hwNextED = ed->hwNextED;
-		}
-		if (ohci->ed_controltail == ed) {
-			ohci->ed_controltail = ed->ed_prev;
-		} else {
-			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
-			next->ed_prev = ed->ed_prev;
-		}
-		break;
-
-	case PIPE_BULK:
-		if (ed->ed_prev == NULL) {
-			if (!ed->hwNextED) {
-				ohci->hc_control &= ~OHCI_CTRL_BLE;
-				writel(ohci->hc_control, &ohci->regs->control);
-			}
-			writel(m32_swap(*((__u32 *) &ed->hwNextED)),
-			       &ohci->regs->ed_bulkhead);
-		} else {
-			ed->ed_prev->hwNextED = ed->hwNextED;
-		}
-		if (ohci->ed_bulktail == ed) {
-			ohci->ed_bulktail = ed->ed_prev;
-		} else {
-			next = (struct ed *)m32_swap(*((__u32 *)&ed->hwNextED));
-			next->ed_prev = ed->ed_prev;
-		}
-		break;
-	}
-	ed->state = ED_UNLINK;
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration
- * command, but the USB stack is a little bit stateless  so we do it at every
- * transaction. If the state of the ed is ED_NEW then a dummy td is added and
- * the state is changed to ED_UNLINK. In all other cases the state is left
- * unchanged. The ed info fields are setted anyway even though most of them
- * should not change */
-
-static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe)
-{
-	struct td *td;
-	struct ed *ed_ret;
-	struct ed *ed;
-
-	ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint(pipe) << 1) |
-				   (usb_pipecontrol(pipe) ? 0 :
-				    usb_pipeout(pipe))];
-
-	if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
-		err("ep_add_ed: pending delete");
-		/* pending delete request */
-		return NULL;
-	}
-
-	if (ed->state == ED_NEW) {
-		ed->hwINFO = m32_swap(OHCI_ED_SKIP);	/* skip ed */
-		/* dummy td; end of td list for ed */
-		td = td_alloc(usb_dev);
-		ed->hwTailP = (__u32) m32_swap(td);
-		ed->hwHeadP = ed->hwTailP;
-		ed->state = ED_UNLINK;
-		ed->type = usb_pipetype(pipe);
-		ohci_dev.ed_cnt++;
-	}
-
-	ed->hwINFO = m32_swap(usb_pipedevice(pipe)
-			      | usb_pipeendpoint(pipe) << 7
-			      | (usb_pipeisoc(pipe) ? 0x8000 : 0)
-			      | (usb_pipecontrol(pipe) ? 0 :
-				 (usb_pipeout(pipe) ? 0x800 : 0x1000))
-			      | usb_pipeslow(pipe) << 13 |
-			      usb_maxpacket(usb_dev, pipe) << 16);
-
-	return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill(struct ohci *ohci, unsigned int info, void *data, int len,
-		    struct usb_device *dev, int index,
-		    struct urb_priv *urb_priv)
-{
-	struct td *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
-	int i;
-#endif
-
-	if (index > urb_priv->length) {
-		err("index > length");
-		return;
-	}
-	/* use this td as the next dummy */
-	td_pt = urb_priv->td[index];
-	td_pt->hwNextTD = 0;
-
-	/* fill the old dummy TD */
-	td = urb_priv->td[index] =
-	    (struct td *) (m32_swap(urb_priv->ed->hwTailP) & ~0xf);
-
-	td->ed = urb_priv->ed;
-	td->next_dl_td = NULL;
-	td->index = index;
-	td->data = (__u32) data;
-#ifdef OHCI_FILL_TRACE
-	if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
-		for (i = 0; i < len; i++)
-			printf("td->data[%d] %#2x ", i,
-			       ((unsigned char *)td->data)[i]);
-		printf("\n");
-	}
-#endif
-	if (!len)
-		data = 0;
-
-	td->hwINFO = (__u32) m32_swap(info);
-	td->hwCBP = (__u32) m32_swap(data);
-	if (data)
-		td->hwBE = (__u32) m32_swap(data + len - 1);
-	else
-		td->hwBE = 0;
-	td->hwNextTD = (__u32) m32_swap(td_pt);
-
-	/* append to queue */
-	td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-
-static void td_submit_job(struct usb_device *dev, unsigned long pipe,
-			  void *buffer, int transfer_len,
-			  struct devrequest *setup, struct urb_priv *urb,
-			  int interval)
-{
-	struct ohci *ohci = &gohci;
-	int data_len = transfer_len;
-	void *data;
-	int cnt = 0;
-	__u32 info = 0;
-	unsigned int toggle = 0;
-
-	/* OHCI handles the DATA-toggles itself, we just
-	   use the USB-toggle bits for reseting */
-	if (usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
-		toggle = TD_T_TOGGLE;
-	} else {
-		toggle = TD_T_DATA0;
-		usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe),
-			      1);
-	}
-	urb->td_cnt = 0;
-	if (data_len)
-		data = buffer;
-	else
-		data = 0;
-
-	switch (usb_pipetype(pipe)) {
-	case PIPE_BULK:
-		info = usb_pipeout(pipe) ? TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN;
-		while (data_len > 4096) {
-			td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
-				4096, dev, cnt, urb);
-			data += 4096;
-			data_len -= 4096;
-			cnt++;
-		}
-		info = usb_pipeout(pipe) ?
-				TD_CC | TD_DP_OUT :
-				TD_CC | TD_R | TD_DP_IN;
-		td_fill(ohci, info | (cnt ? TD_T_TOGGLE : toggle), data,
-			data_len, dev, cnt, urb);
-		cnt++;
-
-		if (!ohci->sleeping)
-			/* start bulk list */
-			writel(OHCI_BLF, &ohci->regs->cmdstatus);
-		break;
-
-	case PIPE_CONTROL:
-		info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
-		td_fill(ohci, info, setup, 8, dev, cnt++, urb);
-		if (data_len > 0) {
-			info = usb_pipeout(pipe) ?
-			    TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 :
-			    TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
-			/* NOTE:  mishandles transfers >8K, some >4K */
-			td_fill(ohci, info, data, data_len, dev, cnt++, urb);
-		}
-		info = usb_pipeout(pipe) ?
-		    TD_CC | TD_DP_IN | TD_T_DATA1 :
-		    TD_CC | TD_DP_OUT | TD_T_DATA1;
-		td_fill(ohci, info, data, 0, dev, cnt++, urb);
-		if (!ohci->sleeping)
-			/* start Control list */
-			writel(OHCI_CLF, &ohci->regs->cmdstatus);
-		break;
-	}
-	if (urb->length != cnt)
-		dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(struct td *td)
-{
-	__u32 tdINFO, tdBE, tdCBP;
-	struct urb_priv *lurb_priv = &urb_priv;
-
-	tdINFO = m32_swap(td->hwINFO);
-	tdBE = m32_swap(td->hwBE);
-	tdCBP = m32_swap(td->hwCBP);
-
-	if (!(usb_pipecontrol(lurb_priv->pipe) &&
-	      ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
-		if (tdBE != 0) {
-			if (td->hwCBP == 0)
-				lurb_priv->actual_length += tdBE - td->data + 1;
-			else
-				lurb_priv->actual_length += tdCBP - td->data;
-		}
-	}
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static struct td *dl_reverse_done_list(struct ohci *ohci)
-{
-	__u32 td_list_hc;
-	__u32 tmp;
-	struct td *td_rev = NULL;
-	struct td *td_list = NULL;
-	struct urb_priv *lurb_priv = NULL;
-
-	td_list_hc = m32_swap(ohci->hcca->done_head) & 0xfffffff0;
-	ohci->hcca->done_head = 0;
-
-	while (td_list_hc) {
-		td_list = (struct td *) td_list_hc;
-
-		if (TD_CC_GET(m32_swap(td_list->hwINFO))) {
-			lurb_priv = &urb_priv;
-			dbg(" USB-error/status: %x : %p",
-			    TD_CC_GET(m32_swap(td_list->hwINFO)), td_list);
-			if (td_list->ed->hwHeadP & m32_swap(0x1)) {
-				if (lurb_priv &&
-				    ((td_list->index+1) < lurb_priv->length)) {
-					tmp = lurb_priv->length - 1;
-					td_list->ed->hwHeadP =
-						(lurb_priv->td[tmp]->hwNextTD &
-						 m32_swap(0xfffffff0)) |
-						 (td_list->ed->hwHeadP &
-						  m32_swap(0x2));
-					lurb_priv->td_cnt += lurb_priv->length -
-							     td_list->index - 1;
-				} else
-					td_list->ed->hwHeadP &=
-					    m32_swap(0xfffffff2);
-			}
-		}
-
-		td_list->next_dl_td = td_rev;
-		td_rev = td_list;
-		td_list_hc = m32_swap(td_list->hwNextTD) & 0xfffffff0;
-	}
-
-	return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list(struct ohci *ohci, struct td *td_list)
-{
-	struct td *td_list_next = NULL;
-	struct ed *ed;
-	int cc = 0;
-	int stat = 0;
-	/* urb_t *urb; */
-	struct urb_priv *lurb_priv;
-	__u32 tdINFO, edHeadP, edTailP;
-
-	while (td_list) {
-		td_list_next = td_list->next_dl_td;
-
-		lurb_priv = &urb_priv;
-		tdINFO = m32_swap(td_list->hwINFO);
-
-		ed = td_list->ed;
-
-		dl_transfer_length(td_list);
-
-		/* error code of transfer */
-		cc = TD_CC_GET(tdINFO);
-		if (cc != 0) {
-			dbg("ConditionCode %#x", cc);
-			stat = cc_to_error[cc];
-		}
-
-		/* see if this done list makes for all TD's of current URB,
-		 * and mark the URB finished if so */
-		if (++(lurb_priv->td_cnt) == lurb_priv->length) {
-			if ((ed->state & (ED_OPER | ED_UNLINK)))
-				urb_finished = 1;
-			else
-				dbg("dl_done_list: strange.., ED state %x, "
-				    "ed->state\n");
-		} else
-			dbg("dl_done_list: processing TD %x, len %x\n",
-			    lurb_priv->td_cnt, lurb_priv->length);
-
-		if (ed->state != ED_NEW) {
-			edHeadP = m32_swap(ed->hwHeadP) & 0xfffffff0;
-			edTailP = m32_swap(ed->hwTailP);
-
-			/* unlink eds if they are not busy */
-			if ((edHeadP == edTailP) && (ed->state == ED_OPER))
-				ep_unlink(ohci, ed);
-		}
-
-		td_list = td_list_next;
-	}
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] = {
-	0x12,	/*  __u8  bLength; */
-	0x01,	/*  __u8  bDescriptorType; Device */
-	0x10,	/*  __u16 bcdUSB; v1.1 */
-	0x01,
-	0x09,	/*  __u8  bDeviceClass; HUB_CLASSCODE */
-	0x00,	/*  __u8  bDeviceSubClass; */
-	0x00,	/*  __u8  bDeviceProtocol; */
-	0x08,	/*  __u8  bMaxPacketSize0; 8 Bytes */
-	0x00,	/*  __u16 idVendor; */
-	0x00,
-	0x00,	/*  __u16 idProduct; */
-	0x00,
-	0x00,	/*  __u16 bcdDevice; */
-	0x00,
-	0x00,	/*  __u8  iManufacturer; */
-	0x01,	/*  __u8  iProduct; */
-	0x00,	/*  __u8  iSerialNumber; */
-	0x01	/*  __u8  bNumConfigurations; */
-};
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] = {
-	0x09,	/*  __u8  bLength; */
-	0x02,	/*  __u8  bDescriptorType; Configuration */
-	0x19,	/*  __u16 wTotalLength; */
-	0x00,
-	0x01,	/*  __u8  bNumInterfaces; */
-	0x01,	/*  __u8  bConfigurationValue; */
-	0x00,	/*  __u8  iConfiguration; */
-	0x40,	/*  __u8  bmAttributes;
-		   Bit 7: Bus-powered, 6: Self-powered,
-		   5 Remote-wakwup, 4..0: resvd */
-	0x00,	/*  __u8  MaxPower; */
-
-	/* interface */
-	0x09,	/*  __u8  if_bLength; */
-	0x04,	/*  __u8  if_bDescriptorType; Interface */
-	0x00,	/*  __u8  if_bInterfaceNumber; */
-	0x00,	/*  __u8  if_bAlternateSetting; */
-	0x01,	/*  __u8  if_bNumEndpoints; */
-	0x09,	/*  __u8  if_bInterfaceClass; HUB_CLASSCODE */
-	0x00,	/*  __u8  if_bInterfaceSubClass; */
-	0x00,	/*  __u8  if_bInterfaceProtocol; */
-	0x00,	/*  __u8  if_iInterface; */
-
-	/* endpoint */
-	0x07,	/*  __u8  ep_bLength; */
-	0x05,	/*  __u8  ep_bDescriptorType; Endpoint */
-	0x81,	/*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
-	0x03,	/*  __u8  ep_bmAttributes; Interrupt */
-	0x02,	/*  __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
-	0x00,
-	0xff	/*  __u8  ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] = {
-	0x04,	/*  __u8  bLength; */
-	0x03,	/*  __u8  bDescriptorType; String-descriptor */
-	0x09,	/*  __u8  lang ID */
-	0x04,	/*  __u8  lang ID */
-};
-
-static unsigned char root_hub_str_index1[] = {
-	28,	/*  __u8  bLength; */
-	0x03,	/*  __u8  bDescriptorType; String-descriptor */
-	'O',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'H',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'C',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'I',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	' ',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'R',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'o',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'o',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	't',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	' ',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'H',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'u',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-	'b',	/*  __u8  Unicode */
-	0,	/*  __u8  Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x)			len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) \
-{ \
-	info("WR:status %#8x", (x)); \
-	writel((x), &gohci.regs->roothub.status); \
-}
-#define WR_RH_PORTSTAT(x) \
-{ \
-	info("WR:portstatus[%d] %#8x", wIndex-1, (x)); \
-	writel((x), &gohci.regs->roothub.portstatus[wIndex-1]); \
-}
-#else
-#define WR_RH_STAT(x) \
-	writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x)\
-	writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT	roothub_status(&gohci)
-#define RD_RH_PORTSTAT	roothub_portstatus(&gohci, wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(struct ohci *controller)
-{
-	__u32 temp, ndp, i;
-	int res;
-
-	res = -1;
-	temp = roothub_a(controller);
-	ndp = (temp & RH_A_NDP);
-	for (i = 0; i < ndp; i++) {
-		temp = roothub_portstatus(controller, i);
-		/* check for a device disconnect */
-		if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
-		     (RH_PS_PESC | RH_PS_CSC)) && ((temp & RH_PS_CCS) == 0)) {
-			res = i;
-			break;
-		}
-	}
-	return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
-			      void *buffer, int transfer_len,
-			      struct devrequest *cmd)
-{
-	void *data = buffer;
-	int leni = transfer_len;
-	int len = 0;
-	int stat = 0;
-	__u32 datab[4];
-	__u8 *data_buf = (__u8 *) datab;
-	__u16 bmRType_bReq;
-	__u16 wValue;
-	__u16 wIndex;
-	__u16 wLength;
-
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)",
-		  usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-	if (usb_pipeint(pipe)) {
-		info("Root-Hub submit IRQ: NOT implemented");
-		return 0;
-	}
-
-	bmRType_bReq = cmd->requesttype | (cmd->request << 8);
-	wValue = m16_swap(cmd->value);
-	wIndex = m16_swap(cmd->index);
-	wLength = m16_swap(cmd->length);
-
-	info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
-	     dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
-	switch (bmRType_bReq) {
-		/* Request Destination:
-		   without flags: Device,
-		   RH_INTERFACE: interface,
-		   RH_ENDPOINT: endpoint,
-		   RH_CLASS means HUB here,
-		   RH_OTHER | RH_CLASS  almost ever means HUB_PORT here
-		 */
-
-	case RH_GET_STATUS:
-		*(__u16 *) data_buf = m16_swap(1);
-		OK(2);
-	case RH_GET_STATUS | RH_INTERFACE:
-		*(__u16 *) data_buf = m16_swap(0);
-		OK(2);
-	case RH_GET_STATUS | RH_ENDPOINT:
-		*(__u16 *) data_buf = m16_swap(0);
-		OK(2);
-	case RH_GET_STATUS | RH_CLASS:
-		*(__u32 *) data_buf =
-		    m32_swap(RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
-		OK(4);
-	case RH_GET_STATUS | RH_OTHER | RH_CLASS:
-		*(__u32 *) data_buf = m32_swap(RD_RH_PORTSTAT);
-		OK(4);
-
-	case RH_CLEAR_FEATURE | RH_ENDPOINT:
-		switch (wValue) {
-		case (RH_ENDPOINT_STALL):
-			OK(0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_CLASS:
-		switch (wValue) {
-		case RH_C_HUB_LOCAL_POWER:
-			OK(0);
-		case (RH_C_HUB_OVER_CURRENT):
-			WR_RH_STAT(RH_HS_OCIC);
-			OK(0);
-		}
-		break;
-
-	case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
-		switch (wValue) {
-		case (RH_PORT_ENABLE):
-			WR_RH_PORTSTAT(RH_PS_CCS);
-			OK(0);
-		case (RH_PORT_SUSPEND):
-			WR_RH_PORTSTAT(RH_PS_POCI);
-			OK(0);
-		case (RH_PORT_POWER):
-			WR_RH_PORTSTAT(RH_PS_LSDA);
-			OK(0);
-		case (RH_C_PORT_CONNECTION):
-			WR_RH_PORTSTAT(RH_PS_CSC);
-			OK(0);
-		case (RH_C_PORT_ENABLE):
-			WR_RH_PORTSTAT(RH_PS_PESC);
-			OK(0);
-		case (RH_C_PORT_SUSPEND):
-			WR_RH_PORTSTAT(RH_PS_PSSC);
-			OK(0);
-		case (RH_C_PORT_OVER_CURRENT):
-			WR_RH_PORTSTAT(RH_PS_OCIC);
-			OK(0);
-		case (RH_C_PORT_RESET):
-			WR_RH_PORTSTAT(RH_PS_PRSC);
-			OK(0);
-		}
-		break;
-
-	case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
-		switch (wValue) {
-		case (RH_PORT_SUSPEND):
-			WR_RH_PORTSTAT(RH_PS_PSS);
-			OK(0);
-		case (RH_PORT_RESET):	/* BUG IN HUP CODE ******** */
-			if (RD_RH_PORTSTAT & RH_PS_CCS)
-				WR_RH_PORTSTAT(RH_PS_PRS);
-			OK(0);
-		case (RH_PORT_POWER):
-			WR_RH_PORTSTAT(RH_PS_PPS);
-			OK(0);
-		case (RH_PORT_ENABLE):	/* BUG IN HUP CODE ******** */
-			if (RD_RH_PORTSTAT & RH_PS_CCS)
-				WR_RH_PORTSTAT(RH_PS_PES);
-			OK(0);
-		}
-		break;
-
-	case RH_SET_ADDRESS:
-		gohci.rh.devnum = wValue;
-		OK(0);
-
-	case RH_GET_DESCRIPTOR:
-		switch ((wValue & 0xff00) >> 8) {
-		case (0x01):	/* device descriptor */
-			len = min_t(unsigned int,
-				    leni,
-				    min_t(unsigned int,
-					  sizeof(root_hub_dev_des), wLength));
-			data_buf = root_hub_dev_des;
-			OK(len);
-		case (0x02):	/* configuration descriptor */
-			len = min_t(unsigned int,
-				    leni,
-				    min_t(unsigned int,
-					  sizeof(root_hub_config_des),
-					  wLength));
-			data_buf = root_hub_config_des;
-			OK(len);
-		case (0x03):	/* string descriptors */
-			if (wValue == 0x0300) {
-				len = min_t(unsigned int,
-					    leni,
-					    min_t(unsigned int,
-						  sizeof(root_hub_str_index0),
-						  wLength));
-				data_buf = root_hub_str_index0;
-				OK(len);
-			}
-			if (wValue == 0x0301) {
-				len = min_t(unsigned int,
-					    leni,
-					    min_t(unsigned int,
-						  sizeof(root_hub_str_index1),
-						  wLength));
-				data_buf = root_hub_str_index1;
-				OK(len);
-			}
-		default:
-			stat = USB_ST_STALLED;
-		}
-		break;
-
-	case RH_GET_DESCRIPTOR | RH_CLASS:
-		{
-			__u32 temp = roothub_a(&gohci);
-
-			data_buf[0] = 9;	/* min length; */
-			data_buf[1] = 0x29;
-			data_buf[2] = temp & RH_A_NDP;
-			data_buf[3] = 0;
-			if (temp & RH_A_PSM)
-				/* per-port power switching? */
-				data_buf[3] |= 0x1;
-			if (temp & RH_A_NOCP)
-				/* no overcurrent reporting? */
-				data_buf[3] |= 0x10;
-			else if (temp & RH_A_OCPM)
-				/* per-port overcurrent reporting? */
-				data_buf[3] |= 0x8;
-
-			/* corresponds to data_buf[4-7] */
-			datab[1] = 0;
-			data_buf[5] = (temp & RH_A_POTPGT) >> 24;
-			temp = roothub_b(&gohci);
-			data_buf[7] = temp & RH_B_DR;
-			if (data_buf[2] < 7) {
-				data_buf[8] = 0xff;
-			} else {
-				data_buf[0] += 2;
-				data_buf[8] = (temp & RH_B_DR) >> 8;
-				data_buf[10] = data_buf[9] = 0xff;
-			}
-
-			len = min_t(unsigned int, leni,
-				    min_t(unsigned int, data_buf[0], wLength));
-			OK(len);
-		}
-
-	case RH_GET_CONFIGURATION:
-		*(__u8 *) data_buf = 0x01;
-		OK(1);
-
-	case RH_SET_CONFIGURATION:
-		WR_RH_STAT(0x10000);
-		OK(0);
-
-	default:
-		dbg("unsupported root hub command");
-		stat = USB_ST_STALLED;
-	}
-
-#ifdef	DEBUG
-	ohci_dump_roothub(&gohci, 1);
-#else
-	wait_ms(1);
-#endif
-
-	len = min_t(int, len, leni);
-	if (data != data_buf)
-		memcpy(data, data_buf, len);
-	dev->act_len = len;
-	dev->status = stat;
-
-#ifdef DEBUG
-	if (transfer_len)
-		urb_priv.actual_length = transfer_len;
-	pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)",
-		  0 /*usb_pipein(pipe) */);
-#else
-	wait_ms(1);
-#endif
-
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		      int transfer_len, struct devrequest *setup, int interval)
-{
-	int stat = 0;
-	int maxsize = usb_maxpacket(dev, pipe);
-	int timeout;
-
-	/* device pulled? Shortcut the action. */
-	if (devgone == dev) {
-		dev->status = USB_ST_CRC_ERR;
-		return 0;
-	}
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
-		  usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-	if (!maxsize) {
-		err("submit_common_message: pipesize for pipe %lx is zero",
-		    pipe);
-		return -1;
-	}
-
-	if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) <
-	    0) {
-		err("sohci_submit_job failed");
-		return -1;
-	}
-
-	wait_ms(10);
-	/* ohci_dump_status(&gohci); */
-
-	/* allow more time for a BULK device to react - some are slow */
-#define BULK_TO	 5000		/* timeout in milliseconds */
-	if (usb_pipebulk(pipe))
-		timeout = BULK_TO;
-	else
-		timeout = 100;
-
-	/* wait for it to complete */
-	for (;;) {
-		/* check whether the controller is done */
-		stat = hc_interrupt();
-
-		if (stat < 0) {
-			stat = USB_ST_CRC_ERR;
-			break;
-		}
-
-		/* NOTE: since we are not interrupt driven in U-Boot and always
-		 * handle only one URB at a time, we cannot assume the
-		 * transaction finished on the first successful return from
-		 * hc_interrupt().. unless the flag for current URB is set,
-		 * meaning that all TD's to/from device got actually
-		 * transferred and processed. If the current URB is not
-		 * finished we need to re-iterate this loop so as
-		 * hc_interrupt() gets called again as there needs to be some
-		 * more TD's to process still */
-		if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
-			/* 0xff is returned for an SF-interrupt */
-			break;
-		}
-
-		if (--timeout) {
-			wait_ms(1);
-			if (!urb_finished)
-				dbg("\%");
-
-		} else {
-			err("CTL:TIMEOUT ");
-			dbg("submit_common_msg: TO status %x\n", stat);
-			stat = USB_ST_CRC_ERR;
-			urb_finished = 1;
-			break;
-		}
-	}
-
-#if 0
-	/* we got an Root Hub Status Change interrupt */
-	if (got_rhsc) {
-#ifdef DEBUG
-		ohci_dump_roothub(&gohci, 1);
-#endif
-		got_rhsc = 0;
-		/* abuse timeout */
-		timeout = rh_check_port_status(&gohci);
-		if (timeout >= 0) {
-#if 0			/* this does nothing useful, but leave it here
-			   in case that changes */
-			/* the called routine adds 1 to the passed value */
-			usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
-			/*
-			 * XXX
-			 * This is potentially dangerous because it assumes
-			 * that only one device is ever plugged in!
-			 */
-			devgone = dev;
-		}
-	}
-#endif
-
-	dev->status = stat;
-	dev->act_len = transfer_len;
-
-#ifdef DEBUG
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)",
-		  usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-
-	/* free TDs in urb_priv */
-	urb_free_priv(&urb_priv);
-	return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		    int transfer_len)
-{
-	info("submit_bulk_msg");
-	return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		       int transfer_len, struct devrequest *setup)
-{
-	int maxsize = usb_maxpacket(dev, pipe);
-
-	info("submit_control_msg");
-#ifdef DEBUG
-	urb_priv.actual_length = 0;
-	pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB",
-		  usb_pipein(pipe));
-#else
-	wait_ms(1);
-#endif
-	if (!maxsize) {
-		err("submit_control_message: pipesize for pipe %lx is zero",
-		    pipe);
-		return -1;
-	}
-	if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
-		gohci.rh.dev = dev;
-		/* root hub - redirect */
-		return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
-					  setup);
-	}
-
-	return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
-		   int transfer_len, int interval)
-{
-	info("submit_int_msg");
-	return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset(struct ohci *ohci)
-{
-	int timeout = 30;
-	int smm_timeout = 50;	/* 0,5 sec */
-
-	if (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
-		/* SMM owns the HC - request ownership */
-		writel(OHCI_OCR, &ohci->regs->cmdstatus);
-		info("USB HC TakeOver from SMM");
-		while (readl(&ohci->regs->control) & OHCI_CTRL_IR) {
-			wait_ms(10);
-			if (--smm_timeout == 0) {
-				err("USB HC TakeOver failed!");
-				return -1;
-			}
-		}
-	}
-
-	/* Disable HC interrupts */
-	writel(OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
-	dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
-	    ohci->slot_name, readl(&ohci->regs->control));
-
-	/* Reset USB (needed by some controllers) */
-	writel(0, &ohci->regs->control);
-
-	/* HC Reset requires max 10 us delay */
-	writel(OHCI_HCR, &ohci->regs->cmdstatus);
-	while ((readl(&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
-		if (--timeout == 0) {
-			err("USB HC reset timed out!");
-			return -1;
-		}
-		udelay(1);
-	}
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start(struct ohci *ohci)
-{
-	__u32 mask;
-	unsigned int fminterval;
-
-	ohci->disabled = 1;
-
-	/* Tell the controller where the control and bulk lists are
-	 * The lists are empty now. */
-
-	writel(0, &ohci->regs->ed_controlhead);
-	writel(0, &ohci->regs->ed_bulkhead);
-
-	/* a reset clears this */
-	writel((__u32) ohci->hcca, &ohci->regs->hcca);
-
-	fminterval = 0x2edf;
-	writel((fminterval * 9) / 10, &ohci->regs->periodicstart);
-	fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
-	writel(fminterval, &ohci->regs->fminterval);
-	writel(0x628, &ohci->regs->lsthresh);
-
-	/* start controller operations */
-	ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
-	ohci->disabled = 0;
-	writel(ohci->hc_control, &ohci->regs->control);
-
-	/* disable all interrupts */
-	mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
-		OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
-		OHCI_INTR_OC | OHCI_INTR_MIE);
-	writel(mask, &ohci->regs->intrdisable);
-	/* clear all interrupts */
-	mask &= ~OHCI_INTR_MIE;
-	writel(mask, &ohci->regs->intrstatus);
-	/* Choose the interrupts we care about now  - but w/o MIE */
-	mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
-	writel(mask, &ohci->regs->intrenable);
-
-#ifdef	OHCI_USE_NPS
-	/* required for AMD-756 and some Mac platforms */
-	writel((roothub_a(ohci) | RH_A_NPS) & ~RH_A_PSM,
-	       &ohci->regs->roothub.a);
-	writel(RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
-	/* POTPGT delay is bits 24-31, in 2 ms units. */
-	mdelay((roothub_a(ohci) >> 23) & 0x1fe);
-
-	/* connect the virtual root hub */
-	ohci->rh.devnum = 0;
-
-	return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int hc_interrupt(void)
-{
-	struct ohci *ohci = &gohci;
-	struct ohci_regs *regs = ohci->regs;
-	int ints;
-	int stat = -1;
-
-	if ((ohci->hcca->done_head != 0) &&
-	    !(m32_swap(ohci->hcca->done_head) & 0x01)) {
-
-		ints = OHCI_INTR_WDH;
-
-	} else {
-		ints = readl(&regs->intrstatus);
-		if (ints == ~(u32) 0) {
-			ohci->disabled++;
-			err("%s device removed!", ohci->slot_name);
-			return -1;
-		}
-		ints &= readl(&regs->intrenable);
-		if (ints == 0) {
-			dbg("hc_interrupt: returning..\n");
-			return 0xff;
-		}
-	}
-
-	/* dbg("Interrupt: %x frame: %x", ints,
-	    le16_to_cpu(ohci->hcca->frame_no)); */
-
-	if (ints & OHCI_INTR_RHSC) {
-		got_rhsc = 1;
-		stat = 0xff;
-	}
-
-	if (ints & OHCI_INTR_UE) {
-		ohci->disabled++;
-		err("OHCI Unrecoverable Error, controller usb-%s disabled",
-		    ohci->slot_name);
-		/* e.g. due to PCI Master/Target Abort */
-
-#ifdef	DEBUG
-		ohci_dump(ohci, 1);
-#else
-		wait_ms(1);
-#endif
-		/* FIXME: be optimistic, hope that bug won't repeat often. */
-		/* Make some non-interrupt context restart the controller. */
-		/* Count and limit the retries though; either hardware or */
-		/* software errors can go forever... */
-		hc_reset(ohci);
-		return -1;
-	}
-
-	if (ints & OHCI_INTR_WDH) {
-		wait_ms(1);
-
-		writel(OHCI_INTR_WDH, &regs->intrdisable);
-		stat = dl_done_list(&gohci, dl_reverse_done_list(&gohci));
-		writel(OHCI_INTR_WDH, &regs->intrenable);
-	}
-
-	if (ints & OHCI_INTR_SO) {
-		dbg("USB Schedule overrun\n");
-		writel(OHCI_INTR_SO, &regs->intrenable);
-		stat = -1;
-	}
-
-	/* FIXME:  this assumes SOF (1/ms) interrupts don't get lost... */
-	if (ints & OHCI_INTR_SF) {
-		unsigned int frame = m16_swap(ohci->hcca->frame_no) & 1;
-		wait_ms(1);
-		writel(OHCI_INTR_SF, &regs->intrdisable);
-		if (ohci->ed_rm_list[frame] != NULL)
-			writel(OHCI_INTR_SF, &regs->intrenable);
-		stat = 0xff;
-	}
-
-	writel(ints, &regs->intrstatus);
-	return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci(struct ohci *ohci)
-{
-	dbg("USB HC release ohci usb-%s", ohci->slot_name);
-
-	if (!ohci->disabled)
-		hc_reset(ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
-	/*
-	 * Set the 48 MHz UPLL clocking. Values are taken from
-	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
-	 */
-	clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
-	gpio->MISCCR |= 0x8;	/* 1 = use pads related USB for USB host */
-
-	/*
-	 * Enable USB host clock.
-	 */
-	clk_power->CLKCON |= (1 << 4);
-
-	memset(&gohci, 0, sizeof(struct ohci));
-	memset(&urb_priv, 0, sizeof(struct urb_priv));
-
-	/* align the storage */
-	if ((__u32) &ghcca[0] & 0xff) {
-		err("HCCA not aligned!!");
-		return -1;
-	}
-	phcca = &ghcca[0];
-	info("aligned ghcca %p", phcca);
-	memset(&ohci_dev, 0, sizeof(struct ohci_device));
-	if ((__u32) &ohci_dev.ed[0] & 0x7) {
-		err("EDs not aligned!!");
-		return -1;
-	}
-	memset(gtd, 0, sizeof(struct td) * (NUM_TD + 1));
-	if ((__u32) gtd & 0x7) {
-		err("TDs not aligned!!");
-		return -1;
-	}
-	ptd = gtd;
-	gohci.hcca = phcca;
-	memset(phcca, 0, sizeof(struct ohci_hcca));
-
-	gohci.disabled = 1;
-	gohci.sleeping = 0;
-	gohci.irq = -1;
-	gohci.regs = (struct ohci_regs *)S3C24X0_USB_HOST_BASE;
-
-	gohci.flags = 0;
-	gohci.slot_name = "s3c2400";
-
-	if (hc_reset(&gohci) < 0) {
-		hc_release_ohci(&gohci);
-		/* Initialization failed */
-		clk_power->CLKCON &= ~(1 << 4);
-		return -1;
-	}
-
-	/* FIXME this is a second HC reset; why?? */
-	gohci.hc_control = OHCI_USB_RESET;
-	writel(gohci.hc_control, &gohci.regs->control);
-	wait_ms(10);
-
-	if (hc_start(&gohci) < 0) {
-		err("can't start usb-%s", gohci.slot_name);
-		hc_release_ohci(&gohci);
-		/* Initialization failed */
-		clk_power->CLKCON &= ~(1 << 4);
-		return -1;
-	}
-#ifdef	DEBUG
-	ohci_dump(&gohci, 1);
-#else
-	wait_ms(1);
-#endif
-	ohci_inited = 1;
-	urb_finished = 1;
-
-	return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-
-	/* this gets called really early - before the controller has */
-	/* even been initialized! */
-	if (!ohci_inited)
-		return 0;
-	/* TODO release any interrupts, etc. */
-	/* call hc_release_ohci() here ? */
-	hc_reset(&gohci);
-	/* may not want to do this */
-	clk_power->CLKCON &= ~(1 << 4);
-	return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */
diff --git a/cpu/arm920t/s3c24x0/usb_ohci.h b/cpu/arm920t/s3c24x0/usb_ohci.h
deleted file mode 100644
index f272d78..0000000
--- a/cpu/arm920t/s3c24x0/usb_ohci.h
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
-	/* No  Error  */ 0,
-	/* CRC Error  */ USB_ST_CRC_ERR,
-	/* Bit Stuff  */ USB_ST_BIT_ERR,
-	/* Data Togg  */ USB_ST_CRC_ERR,
-	/* Stall      */ USB_ST_STALLED,
-	/* DevNotResp */ -1,
-	/* PIDCheck   */ USB_ST_BIT_ERR,
-	/* UnExpPID   */ USB_ST_BIT_ERR,
-	/* DataOver   */ USB_ST_BUF_ERR,
-	/* DataUnder  */ USB_ST_BUF_ERR,
-	/* reservd    */ -1,
-	/* reservd    */ -1,
-	/* BufferOver */ USB_ST_BUF_ERR,
-	/* BuffUnder  */ USB_ST_BUF_ERR,
-	/* Not Access */ -1,
-	/* Not Access */ -1
-};
-
-/* ED States */
-#define ED_NEW		0x00
-#define ED_UNLINK	0x01
-#define ED_OPER		0x02
-#define ED_DEL		0x04
-#define ED_URB_DEL	0x08
-
-/* usb_ohci_ed */
-struct ed {
-	__u32 hwINFO;
-	__u32 hwTailP;
-	__u32 hwHeadP;
-	__u32 hwNextED;
-
-	struct ed *ed_prev;
-	__u8 int_period;
-	__u8 int_branch;
-	__u8 int_load;
-	__u8 int_interval;
-	__u8 state;
-	__u8 type;
-	__u16 last_iso;
-	struct ed *ed_rm_list;
-
-	struct usb_device *usb_dev;
-	__u32 unused[3];
-} __attribute__ ((aligned(16)));
-
-/* TD info field */
-#define TD_CC			0xf0000000
-#define TD_CC_GET(td_p)		(((td_p) >> 28) & 0x0f)
-#define TD_CC_SET(td_p, cc) \
-	{(td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)}
-#define TD_EC			0x0C000000
-#define TD_T			0x03000000
-#define TD_T_DATA0		0x02000000
-#define TD_T_DATA1		0x03000000
-#define TD_T_TOGGLE		0x00000000
-#define TD_R			0x00040000
-#define TD_DI			0x00E00000
-#define TD_DI_SET(X)		(((X) & 0x07)<< 21)
-#define TD_DP			0x00180000
-#define TD_DP_SETUP		0x00000000
-#define TD_DP_IN		0x00100000
-#define TD_DP_OUT		0x00080000
-
-#define TD_ISO			0x00010000
-#define TD_DEL			0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR		0x00
-#define TD_CC_CRC		0x01
-#define TD_CC_BITSTUFFING	0x02
-#define TD_CC_DATATOGGLEM	0x03
-#define TD_CC_STALL		0x04
-#define TD_DEVNOTRESP		0x05
-#define TD_PIDCHECKFAIL	0x06
-#define TD_UNEXPECTEDPID	0x07
-#define TD_DATAOVERRUN		0x08
-#define TD_DATAUNDERRUN	0x09
-#define TD_BUFFEROVERRUN	0x0C
-#define TD_BUFFERUNDERRUN	0x0D
-#define TD_NOTACCESSED		0x0F
-
-
-#define MAXPSW 1
-
-struct td {
-	__u32 hwINFO;
-	__u32 hwCBP;		/* Current Buffer Pointer */
-	__u32 hwNextTD;		/* Next TD Pointer */
-	__u32 hwBE;		/* Memory Buffer End Pointer */
-
-	__u8 unused;
-	__u8 index;
-	struct ed *ed;
-	struct td *next_dl_td;
-	struct usb_device *usb_dev;
-	int transfer_len;
-	__u32 data;
-
-	__u32 unused2[2];
-} __attribute__ ((aligned(32)));
-
-#define OHCI_ED_SKIP	(1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of.  It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32		/* part of the OHCI standard */
-struct ohci_hcca {
-	__u32 int_table[NUM_INTS];	/* Interrupt ED table */
-	__u16 frame_no;		/* current frame number */
-	__u16 pad1;		/* set to 0 on each frame_no change */
-	__u32 done_head;	/* info returned for an interrupt */
-	u8 reserved_for_hc[116];
-} __attribute__ ((aligned(256)));
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS	15	/* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region.  This is Memory Mapped I/O.	You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
-	/* control and status registers */
-	__u32 revision;
-	__u32 control;
-	__u32 cmdstatus;
-	__u32 intrstatus;
-	__u32 intrenable;
-	__u32 intrdisable;
-	/* memory pointers */
-	__u32 hcca;
-	__u32 ed_periodcurrent;
-	__u32 ed_controlhead;
-	__u32 ed_controlcurrent;
-	__u32 ed_bulkhead;
-	__u32 ed_bulkcurrent;
-	__u32 donehead;
-	/* frame counters */
-	__u32 fminterval;
-	__u32 fmremaining;
-	__u32 fmnumber;
-	__u32 periodicstart;
-	__u32 lsthresh;
-	/* Root hub ports */
-	struct ohci_roothub_regs {
-		__u32 a;
-		__u32 b;
-		__u32 status;
-		__u32 portstatus[MAX_ROOT_PORTS];
-	} roothub;
-} __attribute__ ((aligned(32)));
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR	(3 << 0)	/* control/bulk service ratio */
-#define OHCI_CTRL_PLE	(1 << 2)	/* periodic list enable */
-#define OHCI_CTRL_IE	(1 << 3)	/* isochronous enable */
-#define OHCI_CTRL_CLE	(1 << 4)	/* control list enable */
-#define OHCI_CTRL_BLE	(1 << 5)	/* bulk list enable */
-#define OHCI_CTRL_HCFS	(3 << 6)	/* host controller functional state */
-#define OHCI_CTRL_IR	(1 << 8)	/* interrupt routing */
-#define OHCI_CTRL_RWC	(1 << 9)	/* remote wakeup connected */
-#define OHCI_CTRL_RWE	(1 << 10)	/* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-#	define OHCI_USB_RESET	(0 << 6)
-#	define OHCI_USB_RESUME	(1 << 6)
-#	define OHCI_USB_OPER	(2 << 6)
-#	define OHCI_USB_SUSPEND	(3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR	(1 << 0)	/* host controller reset */
-#define OHCI_CLF	(1 << 1)	/* control list filled */
-#define OHCI_BLF	(1 << 2)	/* bulk list filled */
-#define OHCI_OCR	(1 << 3)	/* ownership change request */
-#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO	(1 << 0)	/* scheduling overrun */
-#define OHCI_INTR_WDH	(1 << 1)	/* writeback of done_head */
-#define OHCI_INTR_SF	(1 << 2)	/* start frame */
-#define OHCI_INTR_RD	(1 << 3)	/* resume detect */
-#define OHCI_INTR_UE	(1 << 4)	/* unrecoverable error */
-#define OHCI_INTR_FNO	(1 << 5)	/* frame number overflow */
-#define OHCI_INTR_RHSC	(1 << 6)	/* root hub status change */
-#define OHCI_INTR_OC	(1 << 30)	/* ownership change */
-#define OHCI_INTR_MIE	(1 << 31)	/* master interrupt enable */
-
-/* Virtual Root HUB */
-struct virt_root_hub {
-	int devnum;		/* Address of Root Hub endpoint */
-	void *dev;		/* was urb */
-	void *int_addr;
-	int send;
-	int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE		0x01
-#define RH_ENDPOINT		0x02
-#define RH_OTHER		0x03
-
-#define RH_CLASS		0x20
-#define RH_VENDOR		0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS		0x0080
-#define RH_CLEAR_FEATURE	0x0100
-#define RH_SET_FEATURE		0x0300
-#define RH_SET_ADDRESS		0x0500
-#define RH_GET_DESCRIPTOR	0x0680
-#define RH_SET_DESCRIPTOR	0x0700
-#define RH_GET_CONFIGURATION	0x0880
-#define RH_SET_CONFIGURATION	0x0900
-#define RH_GET_STATE		0x0280
-#define RH_GET_INTERFACE	0x0A80
-#define RH_SET_INTERFACE	0x0B00
-#define RH_SYNC_FRAME		0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP		0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION	0x00
-#define RH_PORT_ENABLE		0x01
-#define RH_PORT_SUSPEND		0x02
-#define RH_PORT_OVER_CURRENT	0x03
-#define RH_PORT_RESET		0x04
-#define RH_PORT_POWER		0x08
-#define RH_PORT_LOW_SPEED	0x09
-
-#define RH_C_PORT_CONNECTION	0x10
-#define RH_C_PORT_ENABLE	0x11
-#define RH_C_PORT_SUSPEND	0x12
-#define RH_C_PORT_OVER_CURRENT	0x13
-#define RH_C_PORT_RESET		0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER	0x00
-#define RH_C_HUB_OVER_CURRENT	0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL	0x01
-
-#define RH_ACK			0x01
-#define RH_REQ_ERR		-1
-#define RH_NACK			0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS		0x00000001 /* current connect status */
-#define RH_PS_PES		0x00000002 /* port enable status */
-#define RH_PS_PSS		0x00000004 /* port suspend status */
-#define RH_PS_POCI		0x00000008 /* port over current indicator */
-#define RH_PS_PRS		0x00000010 /* port reset status */
-#define RH_PS_PPS		0x00000100 /* port power status */
-#define RH_PS_LSDA		0x00000200 /* low speed device attached */
-#define RH_PS_CSC		0x00010000 /* connect status change */
-#define RH_PS_PESC		0x00020000 /* port enable status change */
-#define RH_PS_PSSC		0x00040000 /* port suspend status change */
-#define RH_PS_OCIC		0x00080000 /* over current indicator change */
-#define RH_PS_PRSC		0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS		0x00000001 /* local power status */
-#define RH_HS_OCI		0x00000002 /* over current indicator */
-#define RH_HS_DRWE		0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC		0x00010000 /* local power status change */
-#define RH_HS_OCIC		0x00020000 /* over current indicator change */
-#define RH_HS_CRWE		0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR			0x0000ffff /* device removable flags */
-#define RH_B_PPCM		0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define	RH_A_NDP		(0xff << 0)  /* number of downstream ports */
-#define	RH_A_PSM		(1 << 8)     /* power switching mode */
-#define	RH_A_NPS		(1 << 9)     /* no power switching */
-#define	RH_A_DT			(1 << 10)    /* device type (mbz) */
-#define	RH_A_OCPM		(1 << 11)    /* over current protection mode */
-#define	RH_A_NOCP		(1 << 12)    /* no over current protection */
-#define	RH_A_POTPGT		(0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-struct urb_priv {
-	struct ed *ed;
-	__u16 length;		/* number of tds associated with this request */
-	__u16 td_cnt;		/* number of tds already serviced */
-	int state;
-	unsigned long pipe;
-	int actual_length;
-	struct td *td[N_URB_TD];	/* list pointer to all corresponding TDs
-					   associated with this request */
-};
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-struct ohci {
-	struct ohci_hcca *hcca;	/* hcca */
-	/*dma_addr_t hcca_dma; */
-
-	int irq;
-	int disabled;		/* e.g. got a UE, we're hung */
-	int sleeping;
-	unsigned long flags;	/* for HC bugs */
-
-	struct ohci_regs *regs;	/* OHCI controller's memory */
-
-	struct ed *ed_rm_list[2];  /* lists of all endpoints to be removed */
-	struct ed *ed_bulktail;    /* last endpoint of bulk list */
-	struct ed *ed_controltail; /* last endpoint of control list */
-	int intrstatus;
-	__u32 hc_control;	/* copy of the hc control reg */
-	struct usb_device *dev[32];
-	struct virt_root_hub rh;
-
-	const char *slot_name;
-};
-
-#define NUM_EDS 8		/* num of preallocated endpoint descriptors */
-
-struct ohci_device {
-	struct ed ed[NUM_EDS];
-	int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(struct ohci *ohci, struct ed *ed);
-static int ep_unlink(struct ohci *ohci, struct ed *ed);
-static struct ed *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-struct td gtd[NUM_TD + 1];
-
-/* pointers to aligned storage */
-struct td *ptd;
-
-/* TDs ... */
-static inline struct td *td_alloc(struct usb_device *usb_dev)
-{
-	int i;
-	struct td *td;
-
-	td = NULL;
-	for (i = 0; i < NUM_TD; i++) {
-		if (ptd[i].usb_dev == NULL) {
-			td = &ptd[i];
-			td->usb_dev = usb_dev;
-			break;
-		}
-	}
-
-	return td;
-}
-
-static inline void ed_free(struct ed *ed)
-{
-	ed->usb_dev = NULL;
-}
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
deleted file mode 100644
index 779f192..0000000
--- a/cpu/arm920t/start.S
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- *  armboot - Startup Code for ARM920 CPU-core
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:	b	start_code
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:	.word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (called from the ARM reset exception vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
-	.word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
-
-.globl _bss_end
-_bss_end:
-	.word _end
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-
-/*
- * the actual start code
- */
-
-start_code:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0, cpsr
-	bic	r0, r0, #0x1f
-	orr	r0, r0, #0xd3
-	msr	cpsr, r0
-
-	bl	coloured_LED_init
-	bl	red_LED_on
-
-#if	defined(CONFIG_AT91RM9200DK) || defined(CONFIG_AT91RM9200EK)
-	/*
-	 * relocate exception table
-	 */
-	ldr	r0, =_start
-	ldr	r1, =0x0
-	mov	r2, #16
-copyex:
-	subs	r2, r2, #1
-	ldr	r3, [r0], #4
-	str	r3, [r1], #4
-	bne	copyex
-#endif
-
-#ifdef CONFIG_S3C24X0
-	/* turn off the watchdog */
-
-# if defined(CONFIG_S3C2400)
-#  define pWTCON	0x15300000
-#  define INTMSK	0x14400008	/* Interupt-Controller base addresses */
-#  define CLKDIVN	0x14800014	/* clock divisor register */
-#else
-#  define pWTCON	0x53000000
-#  define INTMSK	0x4A000008	/* Interupt-Controller base addresses */
-#  define INTSUBMSK	0x4A00001C
-#  define CLKDIVN	0x4C000014	/* clock divisor register */
-# endif
-
-	ldr	r0, =pWTCON
-	mov	r1, #0x0
-	str	r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTMR - default
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =INTMSK
-	str	r1, [r0]
-# if defined(CONFIG_S3C2410)
-	ldr	r1, =0x3ff
-	ldr	r0, =INTSUBMSK
-	str	r1, [r0]
-# endif
-
-	/* FCLK:HCLK:PCLK = 1:2:4 */
-	/* default FCLK is 120 MHz ! */
-	ldr	r0, =CLKDIVN
-	mov	r1, #3
-	str	r1, [r0]
-#endif	/* CONFIG_S3C24X0 */
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-#ifndef CONFIG_SKIP_RELOCATE_UBOOT
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp	r0, r1			/* don't reloc during debug         */
-	beq	stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area              */
-	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                 */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	ble	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	mcr	p15, 0, r0, c1, c0, 0
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	mov	ip, lr
-
-	bl	lowlevel_init
-
-	mov	lr, ip
-	mov	pc, lr
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC	0x13
-#define I_BIT		0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE)
-	sub	r2, r2, #(CONFIG_SYS_MALLOC_LEN)
-	/* set base 2 words into abort stack */
-	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)
-	ldmia	r2, {r2 - r3}			@ get pc, cpsr
-	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add	r7, sp, #S_PC
-	stmdb	r7, {sp, lr}^			@ Calling SP, LR
-	str	lr, [r7, #0]			@ Save calling PC
-	mrs	r6, spsr
-	str	r6, [r7, #4]			@ Save CPSR
-	str	r0, [r7, #8]			@ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	/* return & move spsr_svc into cpsr */
-	subs	pc, lr, #4
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE)
-	sub	r13, r13, #(CONFIG_SYS_MALLOC_LEN)
-	/* reserve a couple spots in abort stack */
-	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8)
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str	lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
diff --git a/cpu/arm920t/u-boot.lds b/cpu/arm920t/u-boot.lds
deleted file mode 100644
index d9bfbee..0000000
--- a/cpu/arm920t/u-boot.lds
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = 0x00000000;
-
-	. = ALIGN(4);
-	.text :
-	{
-		cpu/arm920t/start.o	(.text)
-		*(.text)
-	}
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
-	. = ALIGN(4);
-	.data : { *(.data) }
-
-	. = ALIGN(4);
-	.got : { *(.got) }
-
-	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
-
-	. = ALIGN(4);
-	__bss_start = .;
-	.bss (NOLOAD) : { *(.bss) . = ALIGN(4); }
-	_end = .;
-}