diff options
author | Stefan Roese <sr@denx.de> | 2007-08-14 14:44:41 +0200 |
---|---|---|
committer | Stefan Roese <sr@denx.de> | 2007-08-14 14:44:41 +0200 |
commit | 779e975117a75e91fcebe226a63104dbfb924ab1 (patch) | |
tree | 42f48ba97342287f8e155cce29e8e0600064a16f /cpu/ppc4xx/start.S | |
parent | c5a172a5fd636c12467429e3f7910e53773979c6 (diff) | |
download | bootable_bootloader_goldelico_gta04-779e975117a75e91fcebe226a63104dbfb924ab1.zip bootable_bootloader_goldelico_gta04-779e975117a75e91fcebe226a63104dbfb924ab1.tar.gz bootable_bootloader_goldelico_gta04-779e975117a75e91fcebe226a63104dbfb924ab1.tar.bz2 |
ppc4xx: Add initial Zeus (PPC405EP) board support
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'cpu/ppc4xx/start.S')
-rw-r--r-- | cpu/ppc4xx/start.S | 48 |
1 files changed, 16 insertions, 32 deletions
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 18d3445..9626b65 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,38 +1869,7 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif -#ifdef CONFIG_TAIHU - mfdcr r4, CPC0_BOOT - andi. r5, r4, CPC0_BOOT_SEP@l - bne strap_0 /* serial eeprom present */ -#endif - -#ifndef CFG_CPC0_PCI - li r3,CPC0_PCI_HOST_CFG_EN -#ifdef CONFIG_BUBINGA - /* - !----------------------------------------------------------------------- - ! Check FPGA for PCI internal/external arbitration - ! If board is set to internal arbitration, update cpc0_pci - !----------------------------------------------------------------------- - */ - addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ - ori r5,r5,FPGA_REG1@l - lbz r5,0x0(r5) /* read to get PCI arb selection */ - andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ - beq ..pci_cfg_set /* if not set, then bypass reg write*/ -#endif - ori r3,r3,CPC0_PCI_ARBIT_EN -#ifdef CONFIG_TAIHU - ori r3,r3,CPC0_PCI_SPE -#endif -#else /* CFG_CPC0_PCI */ - li r3,CFG_CPC0_PCI -#endif /* CFG_CPC0_PCI */ -..pci_cfg_set: - mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ -strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1966,6 +1935,21 @@ strap_0: bne _pci_66mhz #endif /* CONFIG_TAIHU */ +#if defined(CONFIG_ZEUS) + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + lis r3,0x0000 + addi r3,r3,0x3030 + lis r4,0x8042 + addi r4,r4,0x223e + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 + b 1f +#endif + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ @@ -1982,9 +1966,9 @@ _pci_66mhz: strap_1: mfdcr r3, CPC0_PLLMR0 mfdcr r4, CPC0_PLLMR1 -1: #endif /* CONFIG_TAIHU */ +1: b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: |