diff options
author | H. Nikolaus Schaller <hns@goldelico.com> | 2012-03-26 20:55:28 +0200 |
---|---|---|
committer | H. Nikolaus Schaller <hns@goldelico.com> | 2012-03-26 20:55:28 +0200 |
commit | 92988a21ad4c4c9504295ccb580c9f806134471b (patch) | |
tree | 5effc9f14170112450de05c67dafbe8d5034d595 /drivers/net/mpc5xxx_fec.c | |
parent | ca2b506783b676c95762c54ea24dcfdaae1947c9 (diff) | |
download | bootable_bootloader_goldelico_gta04-92988a21ad4c4c9504295ccb580c9f806134471b.zip bootable_bootloader_goldelico_gta04-92988a21ad4c4c9504295ccb580c9f806134471b.tar.gz bootable_bootloader_goldelico_gta04-92988a21ad4c4c9504295ccb580c9f806134471b.tar.bz2 |
added boot script files to repository
Diffstat (limited to 'drivers/net/mpc5xxx_fec.c')
-rw-r--r-- | drivers/net/mpc5xxx_fec.c | 1024 |
1 files changed, 0 insertions, 1024 deletions
diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c deleted file mode 100644 index bc8c922..0000000 --- a/drivers/net/mpc5xxx_fec.c +++ /dev/null @@ -1,1024 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.c, - * (C) Copyright Motorola, Inc., 2000 - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <mpc5xxx_sdma.h> -#include <malloc.h> -#include <net.h> -#include <netdev.h> -#include <miiphy.h> -#include "mpc5xxx_fec.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* #define DEBUG 0x28 */ - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#if (DEBUG & 0x60) -static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec); -static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec); -#endif /* DEBUG */ - -typedef struct { - uint8 data[1500]; /* actual data */ - int length; /* actual length */ - int used; /* buffer in use or not */ - uint8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */ -} NBUF; - -int fec5xxx_miiphy_read(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 *retVal); -int fec5xxx_miiphy_write(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 data); - -static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis); - -/********************************************************************/ -#if (DEBUG & 0x2) -static void mpc5xxx_fec_phydump (char *devname) -{ - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { -#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ - /* regs to print: 0...7, 16...19, 21, 23, 24 */ - 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, -#else - /* regs to print: 0...8, 16...20 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -#endif - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read(devname, phyAddr, i, &phyStatus); - printf("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec) -{ - int ix; - char *data; - static int once = 0; - - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - if (!once) { - data = (char *)malloc(FEC_MAX_PKT_SIZE); - if (data == NULL) { - printf ("RBD INIT FAILED\n"); - return -1; - } - fec->rbdBase[ix].dataPointer = (uint32)data; - } - fec->rbdBase[ix].status = FEC_RBD_EMPTY; - fec->rbdBase[ix].dataLength = 0; - } - once ++; - - /* - * have the last RBD to close the ring - */ - fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - return 0; -} - -/********************************************************************/ -static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec) -{ - int ix; - - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->tbdBase[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; -} - -/********************************************************************/ -static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Now, we have an empty RxBD, restart the SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; -} - -/********************************************************************/ -static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec) -{ - volatile FEC_TBD *pUsedTbd; - -#if (DEBUG & 0x1) - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->tbdBase[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#if (DEBUG & 0x20) - printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac) -{ - uint8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; - } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); - } - - /* - * Set physical address - */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; -} - -/********************************************************************/ -static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) -{ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_init... Begin\n"); -#endif - - mpc5xxx_fec_init_phy(dev, bis); - - /* - * Call board-specific PHY fixups (if any) - */ -#ifdef CONFIG_RESET_PHY_R - reset_phy(); -#endif - - /* - * Initialize RxBD/TxBD rings - */ - mpc5xxx_fec_rbd_init(fec); - mpc5xxx_fec_tbd_init(fec); - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - /* - * Set FEC-Lite receive control register(R_CNTRL): - */ - if (fec->xcv_type == SEVENWIRE) { - /* - * Frame length=1518; 7-wire mode - */ - fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */ - } else { - /* - * Frame length=1518; MII mode; - */ - fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */ - } - - fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */ - - /* - * Set Opcode/Pause Duration Register - */ - fec->eth->op_pause = 0x00010020; /*FIXME 0xffff0020; */ - - /* - * Set Rx FIFO alarm and granularity value - */ - fec->eth->rfifo_cntrl = 0x0c000000 - | (fec->eth->rfifo_cntrl & ~0x0f000000); - fec->eth->rfifo_alarm = 0x0000030c; -#if (DEBUG & 0x22) - if (fec->eth->rfifo_status & 0x00700000 ) { - printf("mpc5xxx_fec_init() RFIFO error\n"); - } -#endif - - /* - * Set Tx FIFO granularity value - */ - fec->eth->tfifo_cntrl = 0x0c000000 - | (fec->eth->tfifo_cntrl & ~0x0f000000); -#if (DEBUG & 0x2) - printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status); - printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm); -#endif - - /* - * Set transmit fifo watermark register(X_WMRK), default = 64 - */ - fec->eth->tfifo_alarm = 0x00000080; - fec->eth->x_wmrk = 0x2; - - /* - * Set individual address filter for unicast address - * and set physical address registers. - */ - mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr); - - /* - * Set multicast address filter - */ - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; - - /* - * Turn ON cheater FSM: ???? - */ - fec->eth->xmit_fsm = 0x03000000; - - /* - * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't - * work w/ the current receive task. - */ - sdma->PtdCntrl |= 0x00000001; - - /* - * Set priority of different initiators - */ - sdma->IPR0 = 7; /* always */ - sdma->IPR3 = 6; /* Eth RX */ - sdma->IPR4 = 5; /* Eth Tx */ - - /* - * Clear SmartDMA task interrupt pending bits - */ - SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO); - - /* - * Initialize SmartDMA parameters stored in SRAM - */ - *(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase; - *(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase; - *(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase; - *(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase; - - /* - * Enable FEC-Lite controller - */ - fec->eth->ecntrl |= 0x00000006; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - /* - * Enable SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); - -#if (DEBUG & 0x1) - printf("mpc5xxx_fec_init... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) -{ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - static int initialized = 0; - - if(initialized) - return 0; - initialized = 1; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_init_phy... Begin\n"); -#endif - - /* - * Initialize GPIO pins - */ - if (fec->xcv_type == SEVENWIRE) { - /* 10MBit with 7-wire operation */ -#if defined(CONFIG_TOTAL5200) - /* 7-wire and USB2 on Ethernet */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000; -#else /* !CONFIG_TOTAL5200 */ - /* 7-wire only */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000; -#endif /* CONFIG_TOTAL5200 */ - } else { - /* 100MBit with MD operation */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000; - } - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - -/* - * In original Promess-provided code PHY initialization is disabled with the - * following comment: "Phy initialization is DISABLED for now. There was a - * problem with running 100 Mbps on PRO board". Thus we temporarily disable - * PHY initialization for the Motion-PRO board, until a proper fix is found. - */ - - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ - } - - if (fec->xcv_type != SEVENWIRE) { - /* - * Initialize PHY(LXT971A): - * - * Generally, on power up, the LXT971A reads its configuration - * pins to check for forced operation, If not cofigured for - * forced operation, it uses auto-negotiation/parallel detection - * to automatically determine line operating conditions. - * If the PHY device on the other side of the link supports - * auto-negotiation, the LXT971A auto-negotiates with it - * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not - * support auto-negotiation, the LXT971A automatically detects - * the presence of either link pulses(10Mbps PHY) or Idle - * symbols(100Mbps) and sets its operating conditions accordingly. - * - * When auto-negotiation is controlled by software, the following - * steps are recommended. - * - * Note: - * The physical address is dependent on hardware configuration. - * - */ - int timeout = 1; - uint16 phyStatus; - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x8000); - udelay(1000); - -#if defined(CONFIG_UC101) || defined(CONFIG_MUCMC52) - /* Set the LED configuration Register for the UC101 - and MUCMC52 Board */ - miiphy_write(dev->name, phyAddr, 0x14, 0x4122); -#endif - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#if (DEBUG & 0x2) - printf("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); - /* - miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100); - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay(10000); - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay(10000); - if ((timeout--) == 0) { - printf("failed. Link is down.\n"); - break; - } - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#if (DEBUG & 0x2) - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write(dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 5000; - do { - udelay(1000); - - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) { -#if (DEBUG & 0x2) - printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#if (DEBUG & 0x2) - printf("PHY auto neg complete! \n"); -#endif - } - - } - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - -#if (DEBUG & 0x1) - printf("mpc5xxx_fec_init_phy... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static void mpc5xxx_fec_halt(struct eth_device *dev) -{ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - int counter = 0xffff; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - fec->eth->imask = 0; - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - fec->eth->x_cntrl |= 0x00000001; - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; - - /* - * Disable SmartDMA tasks - */ - SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO); - SDMA_TASK_DISABLE (FEC_RECV_TASK_NO); - - /* - * Turn on COMM bus prefetch in the MPC5200 BestComm after we're - * done. It doesn't work w/ the current receive task. - */ - sdma->PtdCntrl &= ~0x00000001; - - /* - * Disable the Ethernet Controller - */ - fec->eth->ecntrl &= 0xfffffffd; - - /* - * Clear FIFO status registers - */ - fec->eth->rfifo_status &= 0x00700000; - fec->eth->tfifo_status &= 0x00700000; - - fec->eth->reset_cntrl = 0x01000000; - - /* - * Issue a reset command to the FEC chip - */ - fec->eth->ecntrl |= 0x1; - - /* - * wait at least 16 clock cycles - */ - udelay(10); - - /* don't leave the MII speed set to zero */ - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ - } - -#if (DEBUG & 0x3) - printf("Ethernet task stopped\n"); -#endif -} - -#if (DEBUG & 0x60) -/********************************************************************/ - -static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec) -{ - uint16 phyAddr = CONFIG_PHY_ADDR; - uint16 phyStatus; - - if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) - || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) { - - miiphy_read(devname, phyAddr, 0x1, &phyStatus); - printf("\nphyStatus: 0x%04x\n", phyStatus); - printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf("ievent: 0x%08x\n", fec->eth->ievent); - printf("x_status: 0x%08x\n", fec->eth->x_status); - printf("tfifo: status 0x%08x\n", fec->eth->tfifo_status); - - printf(" control 0x%08x\n", fec->eth->tfifo_cntrl); - printf(" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr); - printf(" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr); - printf(" alarm 0x%08x\n", fec->eth->tfifo_alarm); - printf(" readptr 0x%08x\n", fec->eth->tfifo_rdptr); - printf(" writptr 0x%08x\n", fec->eth->tfifo_wrptr); - } -} - -static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec) -{ - uint16 phyAddr = CONFIG_PHY_ADDR; - uint16 phyStatus; - - if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) - || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) { - - miiphy_read(devname, phyAddr, 0x1, &phyStatus); - printf("\nphyStatus: 0x%04x\n", phyStatus); - printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf("ievent: 0x%08x\n", fec->eth->ievent); - printf("x_status: 0x%08x\n", fec->eth->x_status); - printf("rfifo: status 0x%08x\n", fec->eth->rfifo_status); - - printf(" control 0x%08x\n", fec->eth->rfifo_cntrl); - printf(" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr); - printf(" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr); - printf(" alarm 0x%08x\n", fec->eth->rfifo_alarm); - printf(" readptr 0x%08x\n", fec->eth->rfifo_rdptr); - printf(" writptr 0x%08x\n", fec->eth->rfifo_wrptr); - } -} -#endif /* DEBUG */ - -/********************************************************************/ - -static int mpc5xxx_fec_send(struct eth_device *dev, volatile void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - volatile FEC_TBD *pTbd; - -#if (DEBUG & 0x20) - printf("tbd status: 0x%04x\n", fec->tbdBase[0].status); - tfifo_print(dev->name, fec); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc5xxx_fec_tbd_scrub(fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#if (DEBUG & 0x20) - printf("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->tbdBase[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - -#if (DEBUG & 0x100) - printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex); -#endif - - /* - * Kick the MII i/f - */ - if (fec->xcv_type != SEVENWIRE) { - uint16 phyStatus; - miiphy_read(dev->name, 0, 0x1, &phyStatus); - } - - /* - * Enable SmartDMA transmit task - */ - -#if (DEBUG & 0x20) - tfifo_print(dev->name, fec); -#endif - SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO); -#if (DEBUG & 0x20) - tfifo_print(dev->name, fec); -#endif -#if (DEBUG & 0x8) - printf( "+" ); -#endif - - fec->cleanTbdNum -= 1; - -#if (DEBUG & 0x129) && (DEBUG & 0x80000000) - printf ("smartDMA ethernet Tx task enabled\n"); -#endif - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay(10); -#if (DEBUG & 0x8) - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc5xxx_fec_recv(struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex]; - unsigned long ievent; - int frame_length, len = 0; - NBUF *frame; - uchar buff[FEC_MAX_PKT_SIZE]; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex); -#endif -#if (DEBUG & 0x8) - printf( "-" ); -#endif - - /* - * Check if any critical events have happened - */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc5xxx_fec_halt(dev); - mpc5xxx_fec_init(dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { - mpc5xxx_fec_halt(dev); - fec->eth->x_cntrl &= ~0x00000001; - mpc5xxx_fec_init(dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) && - ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer address and size - */ - frame = (NBUF *)pRbd->dataPointer; - frame_length = pRbd->dataLength - 4; - -#if (DEBUG & 0x20) - { - int i; - printf("recv data hdr:"); - for (i = 0; i < 14; i++) - printf("%x ", *(frame->head + i)); - printf("\n"); - } -#endif - /* - * Fill the buffer and pass it to upper layers - */ - memcpy(buff, frame->head, 14); - memcpy(buff + 14, frame->data, frame_length); - NetReceive(buff, frame_length); - len = frame_length; - } - /* - * Reset buffer descriptor as empty - */ - mpc5xxx_fec_rbd_clean(fec, pRbd); - } - SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); - return len; -} - - -/********************************************************************/ -int mpc5xxx_fec_initialize(bd_t * bis) -{ - mpc5xxx_fec_priv *fec; - struct eth_device *dev; - char *tmp, *end; - char env_enetaddr[6]; - int i; - - fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec)); - dev = (struct eth_device *)malloc(sizeof(*dev)); - memset(dev, 0, sizeof *dev); - - fec->eth = (ethernet_regs *)MPC5XXX_FEC; - fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; - fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#if defined(CONFIG_MPC5xxx_FEC_MII100) - fec->xcv_type = MII100; -#elif defined(CONFIG_MPC5xxx_FEC_MII10) - fec->xcv_type = MII10; -#elif defined(CONFIG_MPC5xxx_FEC_SEVENWIRE) - fec->xcv_type = SEVENWIRE; -#else -#error fec->xcv_type not initialized. -#endif - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); /* No MII for 7-wire mode */ - } - - dev->priv = (void *)fec; - dev->iobase = MPC5XXX_FEC; - dev->init = mpc5xxx_fec_init; - dev->halt = mpc5xxx_fec_halt; - dev->send = mpc5xxx_fec_send; - dev->recv = mpc5xxx_fec_recv; - - sprintf(dev->name, "FEC"); - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register (dev->name, - fec5xxx_miiphy_read, fec5xxx_miiphy_write); -#endif - - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv("ethaddr"); - if (tmp) { - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - mpc5xxx_fec_set_hwaddr(fec, env_enetaddr); - } - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec5xxx_miiphy_read(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 * retVal) -{ - ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - eth->ievent = 0x00800000; - - /* - * it's now safe to read the PHY's register - */ - *retVal = (uint16) eth->mii_data; - - return 0; -} - -/********************************************************************/ -int fec5xxx_miiphy_write(const char *devname, uint8 phyAddr, uint8 regAddr, uint16 data) -{ - ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - eth->ievent = 0x00800000; - - return 0; -} |