Move architecture-specific includes to arch/$ARCH/include/asm

This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

23 files changed, 0 insertions, 1940 deletions

diff --git a/include/asm-i386/bitops.h b/include/asm-i386/bitops.h
deleted file mode 100644
index c7a38f2..0000000
--- a/include/asm-i386/bitops.h
+++ /dev/null
@@ -1,384 +0,0 @@
-#ifndef _I386_BITOPS_H
-#define _I386_BITOPS_H
-
-/*
- * Copyright 1992, Linus Torvalds.
- */
-
-
-/*
- * These have to be done with inline assembly: that way the bit-setting
- * is guaranteed to be atomic. All bit operations return 0 if the bit
- * was cleared before the operation and != 0 if it was not.
- *
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX "lock ; "
-#else
-#define LOCK_PREFIX ""
-#endif
-
-#define ADDR (*(volatile long *) addr)
-
-/**
- * set_bit - Atomically set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * This function is atomic and may not be reordered.  See __set_bit()
- * if you do not require the atomic guarantees.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void set_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__( LOCK_PREFIX
-		"btsl %1,%0"
-		:"=m" (ADDR)
-		:"Ir" (nr));
-}
-
-/**
- * __set_bit - Set a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike set_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __set_bit(int nr, volatile void * addr)
-{
-	__asm__(
-		"btsl %1,%0"
-		:"=m" (ADDR)
-		:"Ir" (nr));
-}
-
-/**
- * clear_bit - Clears a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * clear_bit() is atomic and may not be reordered.  However, it does
- * not contain a memory barrier, so if it is used for locking purposes,
- * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
- * in order to ensure changes are visible on other processors.
- */
-static __inline__ void clear_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__( LOCK_PREFIX
-		"btrl %1,%0"
-		:"=m" (ADDR)
-		:"Ir" (nr));
-}
-#define smp_mb__before_clear_bit()	barrier()
-#define smp_mb__after_clear_bit()	barrier()
-
-/**
- * __change_bit - Toggle a bit in memory
- * @nr: the bit to set
- * @addr: the address to start counting from
- *
- * Unlike change_bit(), this function is non-atomic and may be reordered.
- * If it's called on the same region of memory simultaneously, the effect
- * may be that only one operation succeeds.
- */
-static __inline__ void __change_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__(
-		"btcl %1,%0"
-		:"=m" (ADDR)
-		:"Ir" (nr));
-}
-
-/**
- * change_bit - Toggle a bit in memory
- * @nr: Bit to clear
- * @addr: Address to start counting from
- *
- * change_bit() is atomic and may not be reordered.
- * Note that @nr may be almost arbitrarily large; this function is not
- * restricted to acting on a single-word quantity.
- */
-static __inline__ void change_bit(int nr, volatile void * addr)
-{
-	__asm__ __volatile__( LOCK_PREFIX
-		"btcl %1,%0"
-		:"=m" (ADDR)
-		:"Ir" (nr));
-}
-
-/**
- * test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_set_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__( LOCK_PREFIX
-		"btsl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),"=m" (ADDR)
-		:"Ir" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * __test_and_set_bit - Set a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_set_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__(
-		"btsl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),"=m" (ADDR)
-		:"Ir" (nr));
-	return oldbit;
-}
-
-/**
- * test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_clear_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__( LOCK_PREFIX
-		"btrl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),"=m" (ADDR)
-		:"Ir" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * __test_and_clear_bit - Clear a bit and return its old value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is non-atomic and can be reordered.
- * If two examples of this operation race, one can appear to succeed
- * but actually fail.  You must protect multiple accesses with a lock.
- */
-static __inline__ int __test_and_clear_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__(
-		"btrl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),"=m" (ADDR)
-		:"Ir" (nr));
-	return oldbit;
-}
-
-/* WARNING: non atomic and it can be reordered! */
-static __inline__ int __test_and_change_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__(
-		"btcl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),"=m" (ADDR)
-		:"Ir" (nr) : "memory");
-	return oldbit;
-}
-
-/**
- * test_and_change_bit - Change a bit and return its new value
- * @nr: Bit to set
- * @addr: Address to count from
- *
- * This operation is atomic and cannot be reordered.
- * It also implies a memory barrier.
- */
-static __inline__ int test_and_change_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__( LOCK_PREFIX
-		"btcl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit),"=m" (ADDR)
-		:"Ir" (nr) : "memory");
-	return oldbit;
-}
-
-#if 0 /* Fool kernel-doc since it doesn't do macros yet */
-/**
- * test_bit - Determine whether a bit is set
- * @nr: bit number to test
- * @addr: Address to start counting from
- */
-static int test_bit(int nr, const volatile void * addr);
-#endif
-
-static __inline__ int constant_test_bit(int nr, const volatile void * addr)
-{
-	return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
-}
-
-static __inline__ int variable_test_bit(int nr, volatile void * addr)
-{
-	int oldbit;
-
-	__asm__ __volatile__(
-		"btl %2,%1\n\tsbbl %0,%0"
-		:"=r" (oldbit)
-		:"m" (ADDR),"Ir" (nr));
-	return oldbit;
-}
-
-#define test_bit(nr,addr) \
-(__builtin_constant_p(nr) ? \
- constant_test_bit((nr),(addr)) : \
- variable_test_bit((nr),(addr)))
-
-/**
- * find_first_zero_bit - find the first zero bit in a memory region
- * @addr: The address to start the search at
- * @size: The maximum size to search
- *
- * Returns the bit-number of the first zero bit, not the number of the byte
- * containing a bit.
- */
-static __inline__ int find_first_zero_bit(void * addr, unsigned size)
-{
-	int d0, d1, d2;
-	int res;
-
-	if (!size)
-		return 0;
-	/* This looks at memory. Mark it volatile to tell gcc not to move it around */
-	__asm__ __volatile__(
-		"movl $-1,%%eax\n\t"
-		"xorl %%edx,%%edx\n\t"
-		"repe; scasl\n\t"
-		"je 1f\n\t"
-		"xorl -4(%%edi),%%eax\n\t"
-		"subl $4,%%edi\n\t"
-		"bsfl %%eax,%%edx\n"
-		"1:\tsubl %%ebx,%%edi\n\t"
-		"shll $3,%%edi\n\t"
-		"addl %%edi,%%edx"
-		:"=d" (res), "=&c" (d0), "=&D" (d1), "=&a" (d2)
-		:"1" ((size + 31) >> 5), "2" (addr), "b" (addr));
-	return res;
-}
-
-/**
- * find_next_zero_bit - find the first zero bit in a memory region
- * @addr: The address to base the search on
- * @offset: The bitnumber to start searching at
- * @size: The maximum size to search
- */
-static __inline__ int find_next_zero_bit (void * addr, int size, int offset)
-{
-	unsigned long * p = ((unsigned long *) addr) + (offset >> 5);
-	int set = 0, bit = offset & 31, res;
-
-	if (bit) {
-		/*
-		 * Look for zero in first byte
-		 */
-		__asm__("bsfl %1,%0\n\t"
-			"jne 1f\n\t"
-			"movl $32, %0\n"
-			"1:"
-			: "=r" (set)
-			: "r" (~(*p >> bit)));
-		if (set < (32 - bit))
-			return set + offset;
-		set = 32 - bit;
-		p++;
-	}
-	/*
-	 * No zero yet, search remaining full bytes for a zero
-	 */
-	res = find_first_zero_bit (p, size - 32 * (p - (unsigned long *) addr));
-	return (offset + set + res);
-}
-
-/**
- * ffz - find first zero in word.
- * @word: The word to search
- *
- * Undefined if no zero exists, so code should check against ~0UL first.
- */
-static __inline__ unsigned long ffz(unsigned long word)
-{
-	__asm__("bsfl %1,%0"
-		:"=r" (word)
-		:"r" (~word));
-	return word;
-}
-
-#ifdef __KERNEL__
-
-/**
- * ffs - find first bit set
- * @x: the word to search
- *
- * This is defined the same way as
- * the libc and compiler builtin ffs routines, therefore
- * differs in spirit from the above ffz (man ffs).
- */
-static __inline__ int ffs(int x)
-{
-	int r;
-
-	__asm__("bsfl %1,%0\n\t"
-		"jnz 1f\n\t"
-		"movl $-1,%0\n"
-		"1:" : "=r" (r) : "g" (x));
-	return r+1;
-}
-#define PLATFORM_FFS
-
-/**
- * hweightN - returns the hamming weight of a N-bit word
- * @x: the word to weigh
- *
- * The Hamming Weight of a number is the total number of bits set in it.
- */
-
-#define hweight32(x) generic_hweight32(x)
-#define hweight16(x) generic_hweight16(x)
-#define hweight8(x) generic_hweight8(x)
-
-#endif /* __KERNEL__ */
-
-#ifdef __KERNEL__
-
-#define ext2_set_bit                 __test_and_set_bit
-#define ext2_clear_bit               __test_and_clear_bit
-#define ext2_test_bit                test_bit
-#define ext2_find_first_zero_bit     find_first_zero_bit
-#define ext2_find_next_zero_bit      find_next_zero_bit
-
-/* Bitmap functions for the minix filesystem.  */
-#define minix_test_and_set_bit(nr,addr) __test_and_set_bit(nr,addr)
-#define minix_set_bit(nr,addr) __set_bit(nr,addr)
-#define minix_test_and_clear_bit(nr,addr) __test_and_clear_bit(nr,addr)
-#define minix_test_bit(nr,addr) test_bit(nr,addr)
-#define minix_find_first_zero_bit(addr,size) find_first_zero_bit(addr,size)
-
-#endif /* __KERNEL__ */
-
-#endif /* _I386_BITOPS_H */
diff --git a/include/asm-i386/byteorder.h b/include/asm-i386/byteorder.h
deleted file mode 100644
index 7dfeb8b..0000000
--- a/include/asm-i386/byteorder.h
+++ /dev/null
@@ -1,43 +0,0 @@
-#ifndef _I386_BYTEORDER_H
-#define _I386_BYTEORDER_H
-
-#include <asm/types.h>
-
-#ifdef __GNUC__
-
-
-static __inline__ __u32 ___arch__swab32(__u32 x)
-{
-#ifdef CONFIG_X86_BSWAP
-	__asm__("bswap %0" : "=r" (x) : "0" (x));
-#else
-	__asm__("xchgb %b0,%h0\n\t"	/* swap lower bytes	*/
-		"rorl $16,%0\n\t"	/* swap words		*/
-		"xchgb %b0,%h0"		/* swap higher bytes	*/
-		:"=q" (x)
-		: "0" (x));
-#endif
-	return x;
-}
-
-static __inline__ __u16 ___arch__swab16(__u16 x)
-{
-	__asm__("xchgb %b0,%h0"		/* swap bytes		*/ \
-		: "=q" (x) \
-		:  "0" (x)); \
-		return x;
-}
-
-#define __arch__swab32(x) ___arch__swab32(x)
-#define __arch__swab16(x) ___arch__swab16(x)
-
-#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
-#  define __BYTEORDER_HAS_U64__
-#  define __SWAB_64_THRU_32__
-#endif
-
-#endif /* __GNUC__ */
-
-#include <linux/byteorder/little_endian.h>
-
-#endif /* _I386_BYTEORDER_H */
diff --git a/include/asm-i386/config.h b/include/asm-i386/config.h
deleted file mode 100644
index 049c44e..0000000
--- a/include/asm-i386/config.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-#endif
diff --git a/include/asm-i386/errno.h b/include/asm-i386/errno.h
deleted file mode 100644
index 4c82b50..0000000
--- a/include/asm-i386/errno.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <asm-generic/errno.h>
diff --git a/include/asm-i386/global_data.h b/include/asm-i386/global_data.h
deleted file mode 100644
index 3abbf1d..0000000
--- a/include/asm-i386/global_data.h
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef	__ASM_GBL_DATA_H
-#define __ASM_GBL_DATA_H
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- *
- * Keep it *SMALL* and remember to set CONFIG_SYS_GBL_DATA_SIZE > sizeof(gd_t)
- */
-
-typedef	struct {
-	bd_t		*bd;
-	unsigned long	flags;
-	unsigned long	baudrate;
-	unsigned long	have_console;	/* serial_init() was called */
-	unsigned long	reloc_off;	/* Relocation Offset */
-	unsigned long	env_addr;	/* Address  of Environment struct */
-	unsigned long	env_valid;	/* Checksum of Environment valid? */
-	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
-	unsigned long	bus_clk;
-	phys_size_t	ram_size;	/* RAM size */
-	unsigned long	reset_status;	/* reset status register at boot */
-	void		**jt;		/* jump table */
-} gd_t;
-
-/*
- * Global Data Flags
- */
-#define	GD_FLG_RELOC	0x00001		/* Code was relocated to RAM		*/
-#define	GD_FLG_DEVINIT	0x00002		/* Devices have been initialized	*/
-#define	GD_FLG_SILENT	0x00004		/* Silent mode				*/
-#define	GD_FLG_POSTFAIL	0x00008		/* Critical POST test failed		*/
-#define	GD_FLG_POSTSTOP	0x00010		/* POST seqeunce aborted		*/
-#define	GD_FLG_LOGINIT	0x00020		/* Log Buffer has been initialized	*/
-#define GD_FLG_DISABLE_CONSOLE	0x00040		/* Disable console (in & out)	 */
-
-extern gd_t *gd;
-
-#define DECLARE_GLOBAL_DATA_PTR
-
-#endif /* __ASM_GBL_DATA_H */
diff --git a/include/asm-i386/i8254.h b/include/asm-i386/i8254.h
deleted file mode 100644
index aafdfb8..0000000
--- a/include/asm-i386/i8254.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/* i8254.h Intel 8254 PIT registers */
-
-
-#ifndef _ASMI386_I8254_H_
-#define _ASMI386_I8954_H_       1
-
-
-#define PIT_T0		0x00		/* PIT channel 0 count/status */
-#define PIT_T1		0x01		/* PIT channel 1 count/status */
-#define PIT_T2		0x02		/* PIT channel 2 count/status */
-#define PIT_COMMAND	0x03		/* PIT mode control, latch and read back */
-
-/* PIT Command Register Bit Definitions */
-
-#define PIT_CMD_CTR0	0x00		/* Select PIT counter 0 */
-#define PIT_CMD_CTR1	0x40		/* Select PIT counter 1 */
-#define PIT_CMD_CTR2	0x80		/* Select PIT counter 2 */
-
-#define PIT_CMD_LATCH	0x00		/* Counter Latch Command */
-#define PIT_CMD_LOW	0x10		/* Access counter bits 7-0 */
-#define PIT_CMD_HIGH	0x20		/* Access counter bits 15-8 */
-#define PIT_CMD_BOTH	0x30		/* Access counter bits 15-0 in two accesses */
-
-#define PIT_CMD_MODE0	0x00		/* Select mode 0 */
-#define PIT_CMD_MODE1	0x02		/* Select mode 1 */
-#define PIT_CMD_MODE2	0x04		/* Select mode 2 */
-#define PIT_CMD_MODE3	0x06		/* Select mode 3 */
-#define PIT_CMD_MODE4	0x08		/* Select mode 4 */
-#define PIT_CMD_MODE5	0x0A		/* Select mode 5 */
-
-#endif
diff --git a/include/asm-i386/i8259.h b/include/asm-i386/i8259.h
deleted file mode 100644
index 774d7a3..0000000
--- a/include/asm-i386/i8259.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* i8259.h i8259 PIC Registers */
-
-#ifndef _ASMI386_I8259_H_
-#define _ASMI386_I8959_H_       1
-
-
-/* PIC I/O mapped registers */
-
-#define IRR		0x0	/* Interrupt Request Register */
-#define ISR		0x0	/* In-Service Register */
-#define ICW1		0x0	/* Initialization Control Word 1 */
-#define OCW2		0x0	/* Operation Control Word 2 */
-#define OCW3		0x0	/* Operation Control Word 3 */
-#define ICW2		0x1	/* Initialization Control Word 2 */
-#define ICW3		0x1	/* Initialization Control Word 3 */
-#define ICW4		0x1	/* Initialization Control Word 4 */
-#define IMR		0x1	/* Interrupt Mask Register */
-
-/* bits for IRR, IMR, ISR and ICW3 */
-#define	IR7		0x80	/* IR7 */
-#define	IR6		0x40	/* IR6 */
-#define	IR5		0x20	/* IR5 */
-#define	IR4		0x10	/* IR4 */
-#define	IR3		0x08	/* IR3 */
-#define	IR2		0x04	/* IR2 */
-#define	IR1		0x02	/* IR1 */
-#define	IR0		0x01	/* IR0 */
-
-/* bits for SEOI */
-#define	SEOI_IR7	0x07	/* IR7 */
-#define	SEOI_IR6	0x06	/* IR6 */
-#define	SEOI_IR5	0x05	/* IR5 */
-#define	SEOI_IR4	0x04	/* IR4 */
-#define	SEOI_IR3	0x03	/* IR3 */
-#define	SEOI_IR2	0x02	/* IR2 */
-#define	SEOI_IR1	0x01	/* IR1 */
-#define	SEOI_IR0	0x00	/* IR0 */
-
-/* OCW2 bits */
-#define OCW2_RCLR	0x00	/* Rotate/clear */
-#define OCW2_NEOI	0x20	/* Non specific EOI */
-#define OCW2_NOP	0x40	/* NOP */
-#define OCW2_SEOI	0x60	/* Specific EOI */
-#define OCW2_RSET	0x80	/* Rotate/set */
-#define OCW2_REOI	0xA0	/* Rotate on non specific EOI */
-#define OCW2_PSET	0xC0	/* Priority Set Command */
-#define OCW2_RSEOI	0xE0	/* Rotate on specific EOI */
-
-/* ICW1 bits */
-#define ICW1_SEL	0x10	/* Select ICW1 */
-#define ICW1_LTIM	0x08	/* Level-Triggered Interrupt Mode */
-#define ICW1_ADI	0x04	/* Address Interval */
-#define ICW1_SNGL	0x02	/* Single PIC */
-#define ICW1_EICW4	0x01	/* Expect initilization ICW4 */
-
-/* ICW2 is the starting vector number */
-
-/* ICW2 is bit-mask of present slaves for a master device,
- * or the slave ID for a slave device */
-
-/* ICW4 bits */
-#define	ICW4_AEOI	0x02	/* Automatic EOI Mode */
-#define ICW4_PM		0x01	/* Microprocessor Mode */
-
-#endif
diff --git a/include/asm-i386/ibmpc.h b/include/asm-i386/ibmpc.h
deleted file mode 100644
index e35cbd8..0000000
--- a/include/asm-i386/ibmpc.h
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_IBMPC_H_
-#define __ASM_IBMPC_H_ 1
-
-/* misc ports in an ibm compatible pc */
-
-#define MASTER_PIC      0x20
-#define PIT_BASE	0x40
-#define KBDDATA         0x60
-#define SYSCTLB         0x62
-#define KBDCMD          0x64
-#define SYSCTLA         0x92
-#define SLAVE_PIC       0xa0
-
-#if 1
-#define UART0_BASE     0x3f8
-#define UART1_BASE     0x2f8
-#else
-/* FixMe: uarts swapped */
-#define UART0_BASE     0x2f8
-#define UART1_BASE     0x3f8
-#endif
-
-
-#endif
diff --git a/include/asm-i386/ic/pci.h b/include/asm-i386/ic/pci.h
deleted file mode 100644
index bcccdbe..0000000
--- a/include/asm-i386/ic/pci.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_IC_SC520_PCI_H_
-#define _ASM_IC_SC520_PCI_H_ 1
-
-/* pin number used for PCI interrupt mappings */
-#define SC520_PCI_INTA 0
-#define SC520_PCI_INTB 1
-#define SC520_PCI_INTC 2
-#define SC520_PCI_INTD 3
-#define SC520_PCI_GPIRQ0 4
-#define SC520_PCI_GPIRQ1 5
-#define SC520_PCI_GPIRQ2 6
-#define SC520_PCI_GPIRQ3 7
-#define SC520_PCI_GPIRQ4 8
-#define SC520_PCI_GPIRQ5 9
-#define SC520_PCI_GPIRQ6 10
-#define SC520_PCI_GPIRQ7 11
-#define SC520_PCI_GPIRQ8 12
-#define SC520_PCI_GPIRQ9 13
-#define SC520_PCI_GPIRQ10 14
-
-extern int sc520_pci_ints[];
-
-void pci_sc520_init(struct pci_controller *hose);
-int pci_sc520_set_irq(int pci_pin, int irq);
-
-#endif
diff --git a/include/asm-i386/ic/sc520.h b/include/asm-i386/ic/sc520.h
deleted file mode 100644
index 57c9904..0000000
--- a/include/asm-i386/ic/sc520.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_IC_SC520_H_
-#define _ASM_IC_SC520_H_ 1
-
-#ifndef __ASSEMBLY__
-
-void init_sc520(void);
-unsigned long init_sc520_dram(void);
-
-/* Memory mapped configuration registers */
-typedef struct sc520_mmcr {
-	u16 revid;	/* ElanSC520 microcontroller revision id */
-	u8  cpuctl;	/* am5x86 CPU control  */
-
-	u8  pad_0x003[0x0d];
-
-	u8  drcctl;		/* SDRAM control */
-	u8  pad_0x011[0x01];
-	u8  drctmctl;		/* SDRAM timing control */
-	u8  pad_0x013[0x01];
-	u16 drccfg;		/* SDRAM bank configuration*/
-	u8  pad_0x016[0x02];
-	u32 drcbendadr;		/* SDRAM bank 0-3 ending address*/
-	u8  pad_0x01c[0x04];
-	u8  eccctl;		/* ECC control */
-	u8  eccsta;		/* ECC status */
-	u8  eccckbpos;		/* ECC check bit position */
-	u8  ecccktest;		/* ECC Check Code Test */
-	u32 eccsbadd;		/* ECC single-bit error address */
-	u32 eccmbadd;		/* ECC multi-bit error address */
-
-	u8  pad_0x02c[0x14];
-
-	u8  dbctl;		/* SDRAM buffer control */
-
-	u8  pad_0x041[0x0f];
-
-	u16 bootcsctl;		/* /BOOTCS control */
-	u8  pad_0x052[0x02];
-	u16 romcs1ctl;		/* /ROMCS1 control */
-	u16 romcs2ctl;		/* /ROMCS2 control */
-
-	u8  pad_0x058[0x08];
-
-	u16 hbctl;		/* host bridge control */
-	u16 hbtgtirqctl;	/* host bridge target interrupt control */
-	u16 hbtgtirqsta;	/* host bridge target interrupt status */
-	u16 hbmstirqctl;	/* host bridge target interrupt control */
-	u16 hbmstirqsta;	/* host bridge master interrupt status */
-	u8  pad_0x06a[0x02];
-	u32 mstintadd;		/* host bridge master interrupt address */
-
-	u8  sysarbctl;		/* system arbiter control */
-	u8  pciarbsta;		/* PCI bus arbiter status */
-	u16 sysarbmenb;		/* system arbiter master enable */
-	u32 arbprictl;		/* arbiter priority control */
-
-	u8  pad_0x078[0x08];
-
-	u8  adddecctl;		/* address decode control */
-	u8  pad_0x081[0x01];
-	u16 wpvsta;		/* write-protect violation status */
-	u8  pad_0x084[0x04];
-	u32 par[16];		/* programmable address regions */
-
-	u8  pad_0x0c8[0x0b38];
-
-	u8  gpecho;		/* GP echo mode */
-	u8  gpcsdw;		/* GP chip select data width */
-	u16 gpcsqual;		/* GP chip select qualification */
-	u8  pad_0xc04[0x4];
-	u8  gpcsrt;		/* GP chip select recovery time */
-	u8  gpcspw;		/* GP chip select pulse width */
-	u8  gpcsoff;		/* GP chip select offset */
-	u8  gprdw;		/* GP read pulse width */
-	u8  gprdoff;		/* GP read offset */
-	u8  gpwrw;		/* GP write pulse width */
-	u8  gpwroff;		/* GP write offset */
-	u8  gpalew;		/* GP ale pulse width */
-	u8  gpaleoff;		/* GP ale offset */
-
-	u8  pad_0xc11[0x0f];
-
-	u16 piopfs15_0;		/* PIO15-PIO0 pin function select */
-	u16 piopfs31_16;	/* PIO31-PIO16 pin function select */
-	u8  cspfs;		/* chip select pin function select */
-	u8  pad_0xc25[0x01];
-	u8  clksel;		/* clock select */
-	u8  pad_0xc27[0x01];
-	u16 dsctl;		/* drive strength control */
-	u16 piodir15_0;		/* PIO15-PIO0 direction */
-	u16 piodir31_16;	/* PIO31-PIO16 direction */
-	u8  pad_0xc2e[0x02];
-	u16 piodata15_0	;	/* PIO15-PIO0 data */
-	u16 piodata31_16;	/* PIO31-PIO16 data */
-	u16 pioset15_0;		/* PIO15-PIO0 set */
-	u16 pioset31_16;	/* PIO31-PIO16 set */
-	u16 pioclr15_0;		/* PIO15-PIO0 clear */
-	u16 pioclr31_16;	/* PIO31-PIO16 clear */
-
-	u8  pad_0xc3c[0x24];
-
-	u16 swtmrmilli;		/* software timer millisecond count */
-	u16 swtmrmicro;		/* software timer microsecond count */
-	u8  swtmrcfg;		/* software timer configuration */
-
-	u8  pad_0xc65[0x0b];
-
-	u8  gptmrsta;		/* GP timers status register */
-	u8  pad_0xc71;
-	u16 gptmr0ctl;		/* GP timer 0 mode/control */
-	u16 gptmr0cnt;		/* GP timer 0 count */
-	u16 gptmr0maxcmpa;	/* GP timer 0 maxcount compare A */
-	u16 gptmr0maxcmpb;	/* GP timer 0 maxcount compare B */
-	u16 gptmr1ctl;		/* GP timer 1 mode/control */
-	u16 gptmr1cnt;		/* GP timer 1 count */
-	u16 gptmr1maxcmpa;	/* GP timer 1 maxcount compare A */
-	u16 gptmr1maxcmpb;	/* GP timer 1 maxcount compare B*/
-	u16 gptmr2ctl;		/* GP timer 2 mode/control */
-	u16 gptmr2cnt;		/* GP timer 2 count */
-	u8  pad_0xc86[0x08];
-	u16 gptmr2maxcmpa;	/* GP timer 2 maxcount compare A */
-
-	u8  pad_0xc90[0x20];
-
-	u16 wdtmrctl;		/* watchdog timer control */
-	u16 wdtmrcntl;		/* watchdog timer count low */
-	u16 wdtmrcnth;		/* watchdog timer count high */
-
-	u8  pad_0xcb6[0x0a];
-
-	u8  uart1ctl;		/* UART 1 general control */
-	u8  uart1sta;		/* UART 1 general status */
-	u8  uart1fcrshad;	/* UART 1 FIFO control shadow */
-	u8  pad_0xcc3[0x01];
-	u8  uart2ctl;		/* UART 2 general control */
-	u8  uart2sta;		/* UART 2 general status */
-	u8  uart2fcrshad;	/* UART 2 FIFO control shadow */
-
-	u8  pad_0xcc7[0x09];
-
-	u8  ssictl;		/* SSI control */
-	u8  ssixmit;		/* SSI transmit */
-	u8  ssicmd;		/* SSI command */
-	u8  ssista;		/* SSI status */
-	u8  ssircv;		/* SSI receive */
-
-	u8  pad_0xcd5[0x2b];
-
-	u8  picicr;		/* interrupt control */
-	u8  pad_0xd01[0x01];
-	u8  pic_mode[3];	/* PIC interrupt mode */
-	u8  pad_0xd05[0x03];
-	u16 swint16_1;		/* software interrupt 16-1 control */
-	u8  swint22_17;		/* software interrupt 22-17/NMI control */
-	u8  pad_0xd0b[0x05];
-	u16 intpinpol;		/* interrupt pin polarity */
-	u8  pad_0xd12[0x02];
-	u16 pcihostmap;		/* PCI host bridge interrupt mapping */
-	u8  pad_0xd16[0x02];
-	u16 eccmap;		/* ECC interrupt mapping */
-	u8  gp_tmr_int_map[3];	/* GP timer interrupt mapping */
-	u8  pad_0xd1d[0x03];
-	u8  pit_int_map[3];	/* PIT interrupt mapping */
-	u8  pad_0xd23[0x05];
-	u8  uart_int_map[2];	/* UART interrupt mapping */
-	u8  pad_0xd2a[0x06];
-	u8  pci_int_map[4];	/* PCI interrupt mapping (A through D)*/
-	u8  pad_0xd34[0x0c];
-	u8  dmabcintmap;	/* DMA buffer chaining interrupt mapping */
-	u8  ssimap;		/* SSI interrupt mapping register */
-	u8  wdtmap;		/* watchdog timer interrupt mapping */
-	u8  rtcmap;		/* RTC interrupt mapping register */
-	u8  wpvmap;		/* write-protect interrupt mapping */
-	u8  icemap;		/* AMDebug JTAG Rx/Tx interrupt mapping */
-	u8  ferrmap;		/* floating point error interrupt mapping */
-	u8  pad_0xd47[0x09];
-	u8  gp_int_map[11];	/* GP IRQ interrupt mapping */
-
-	u8  pad_0xd5b[0x15];
-
-	u8  sysinfo;		/* system board information */
-	u8  pad_0xd71[0x01];
-	u8  rescfg;		/* reset configuration */
-	u8  pad_0xd73[0x01];
-	u8  ressta;		/* reset status */
-
-	u8  pad_0xd75[0x0b];
-
-	u8  gpdmactl;		/* GP-DMA Control */
-	u8  gpdmammio;		/* GP-DMA memory-mapped I/O */
-	u16 gpdmaextchmapa;	/* GP-DMA resource channel map a */
-	u16 gpdmaextchmapb;	/* GP-DMA resource channel map b */
-	u8  gp_dma_ext_pg_0;	/* GP-DMA channel extended page 0 */
-	u8  gp_dma_ext_pg_1;	/* GP-DMA channel extended page 0 */
-	u8  gp_dma_ext_pg_2;	/* GP-DMA channel extended page 0 */
-	u8  gp_dma_ext_pg_3;	/* GP-DMA channel extended page 0 */
-	u8  gp_dma_ext_pg_5;	/* GP-DMA channel extended page 0 */
-	u8  gp_dma_ext_pg_6;	/* GP-DMA channel extended page 0 */
-	u8  gp_dma_ext_pg_7;	/* GP-DMA channel extended page 0 */
-	u8  pad_0xd8d[0x03];
-	u8  gpdmaexttc3;	/* GP-DMA channel 3 extender transfer count */
-	u8  gpdmaexttc5;	/* GP-DMA channel 5 extender transfer count */
-	u8  gpdmaexttc6;	/* GP-DMA channel 6 extender transfer count */
-	u8  gpdmaexttc7;	/* GP-DMA channel 7 extender transfer count */
-	u8  pad_0xd94[0x4];
-	u8  gpdmabcctl;		/* buffer chaining control */
-	u8  gpdmabcsta;		/* buffer chaining status */
-	u8  gpdmabsintenb;	/* buffer chaining interrupt enable */
-	u8  gpdmabcval;		/* buffer chaining valid */
-	u8  pad_0xd9c[0x04];
-	u16 gpdmanxtaddl3;	/* GP-DMA channel 3 next address low */
-	u16 gpdmanxtaddh3;	/* GP-DMA channel 3 next address high */
-	u16 gpdmanxtaddl5;	/* GP-DMA channel 5 next address low */
-	u16 gpdmanxtaddh5;	/* GP-DMA channel 5 next address high */
-	u16 gpdmanxtaddl6;	/* GP-DMA channel 6 next address low */
-	u16 gpdmanxtaddh6;	/* GP-DMA channel 6 next address high */
-	u16 gpdmanxtaddl7;	/* GP-DMA channel 7 next address low */
-	u16 gpdmanxtaddh7;	/* GP-DMA channel 7 next address high */
-	u16 gpdmanxttcl3;	/* GP-DMA channel 3 next transfer count low */
-	u16 gpdmanxttch3;	/* GP-DMA channel 3 next transfer count high */
-	u16 gpdmanxttcl5;	/* GP-DMA channel 5 next transfer count low */
-	u16 gpdmanxttch5;	/* GP-DMA channel 5 next transfer count high */
-	u16 gpdmanxttcl6;	/* GP-DMA channel 6 next transfer count low */
-	u16 gpdmanxttch6;	/* GP-DMA channel 6 next transfer count high */
-	u16 gpdmanxttcl7;	/* GP-DMA channel 7 next transfer count low */
-	u16 gpdmanxttch7;	/* GP-DMA channel 7 next transfer count high */
-
-	u8  pad_0xdc0[0x0240];
-} sc520_mmcr_t;
-
-extern volatile sc520_mmcr_t *sc520_mmcr;
-
-#endif
-
-/* MMCR Offsets (required for assembler code */
-#define SC520_DBCTL		0x0040	/* SDRAM Buffer Control Register */
-#define SC520_PAR14		0x00c0	/* Programmable Address Region 14 Register */
-#define SC520_PAR15		0x00c4	/* Programmable Address Region 15 Register */
-#define SC520_SWTMRMILLI	0x0c60  /* Software Timer Millisecond Count */
-#define SC520_SWTMRMICRO	0x0c62  /* Software Timer Microsecond Count */
-
-/* MMCR Register bits (not all of them :) ) */
-
-/* SSI Stuff */
-#define CTL_CLK_SEL_4		0x00	/* Nominal Bit Rate = 8 MHz    */
-#define CTL_CLK_SEL_8		0x10	/* Nominal Bit Rate = 4 MHz    */
-#define CTL_CLK_SEL_16		0x20	/* Nominal Bit Rate = 2 MHz    */
-#define CTL_CLK_SEL_32		0x30	/* Nominal Bit Rate = 1 MHz    */
-#define CTL_CLK_SEL_64		0x40	/* Nominal Bit Rate = 512 KHz  */
-#define CTL_CLK_SEL_128		0x50	/* Nominal Bit Rate = 256 KHz  */
-#define CTL_CLK_SEL_256		0x60	/* Nominal Bit Rate = 128 KHz  */
-#define CTL_CLK_SEL_512		0x70	/* Nominal Bit Rate = 64 KHz   */
-
-#define TC_INT_ENB		0x08	/* Transaction Complete Interrupt Enable */
-#define PHS_INV_ENB		0x04	/* SSI Inverted Phase Mode Enable */
-#define CLK_INV_ENB		0x02	/* SSI Inverted Clock Mode Enable */
-#define MSBF_ENB		0x01	/* SSI Most Significant Bit First Mode Enable */
-
-#define SSICMD_CMD_SEL_XMITRCV	0x03	/* Simultaneous Transmit / Receive Transaction */
-#define SSICMD_CMD_SEL_RCV	0x02	/* Receive Transaction */
-#define SSICMD_CMD_SEL_XMIT	0x01	/* Transmit Transaction */
-#define SSISTA_BSY		0x02	/* SSI Busy */
-#define SSISTA_TC_INT		0x01	/* SSI Transaction Complete Interrupt */
-
-/* BITS for SC520_ADDDECCTL: */
-#define WPV_INT_ENB		0x80	/* Write-Protect Violation Interrupt Enable */
-#define IO_HOLE_DEST_PCI	0x10	/* I/O Hole Access Destination */
-#define RTC_DIS			0x04	/* RTC Disable */
-#define UART2_DIS		0x02	/* UART2 Disable */
-#define UART1_DIS		0x01	/* UART1 Disable */
-
-/* bus mapping constants (used for PCI core initialization) */																																																 /* bus mapping constants */
-#define SC520_REG_ADDR		0x00000cf8
-#define SC520_REG_DATA		0x00000cfc
-
-#define SC520_ISA_MEM_PHYS	0x00000000
-#define SC520_ISA_MEM_BUS	0x00000000
-#define SC520_ISA_MEM_SIZE	0x01000000
-
-#define SC520_ISA_IO_PHYS	0x00000000
-#define SC520_ISA_IO_BUS	0x00000000
-#define SC520_ISA_IO_SIZE	0x00001000
-
-/* PCI I/O space from 0x1000 to 0xdfff
- * (make 0xe000-0xfdff available for stuff like PCCard boot) */
-#define SC520_PCI_IO_PHYS	0x00001000
-#define SC520_PCI_IO_BUS	0x00001000
-#define SC520_PCI_IO_SIZE	0x0000d000
-
-/* system memory from 0x00000000 to 0x0fffffff */
-#define	SC520_PCI_MEMORY_PHYS	0x00000000
-#define	SC520_PCI_MEMORY_BUS	0x00000000
-#define SC520_PCI_MEMORY_SIZE	0x10000000
-
-/* PCI bus memory from 0x10000000 to 0x26ffffff
- * (make 0x27000000 - 0x27ffffff available for stuff like PCCard boot) */
-#define SC520_PCI_MEM_PHYS	0x10000000
-#define SC520_PCI_MEM_BUS	0x10000000
-#define SC520_PCI_MEM_SIZE	0x17000000
-
-/* 0x28000000 - 0x3fffffff is used by the flash banks */
-
-/* 0x40000000 - 0xffffffff is not adressable by the SC520 */
-
-/* priority numbers used for interrupt channel mappings */
-#define SC520_IRQ_DISABLED 0
-#define SC520_IRQ0  1
-#define SC520_IRQ1  2
-#define SC520_IRQ2  4  /* same as IRQ9 */
-#define SC520_IRQ3  11
-#define SC520_IRQ4  12
-#define SC520_IRQ5  13
-#define SC520_IRQ6  21
-#define SC520_IRQ7  22
-#define SC520_IRQ8  3
-#define SC520_IRQ9  4
-#define SC520_IRQ10 5
-#define SC520_IRQ11 6
-#define SC520_IRQ12 7
-#define SC520_IRQ13 8
-#define SC520_IRQ14 9
-#define SC520_IRQ15 10
-
-#endif
diff --git a/include/asm-i386/ic/ssi.h b/include/asm-i386/ic/ssi.h
deleted file mode 100644
index bd48eab..0000000
--- a/include/asm-i386/ic/ssi.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2008
- * Graeme Russ <graeme.russ@gmail.com>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_IC_SSI_H_
-#define _ASM_IC_SSI_H_ 1
-
-int ssi_set_interface(int, int, int, int);
-void ssi_chip_select(int);
-u8 ssi_txrx_byte(u8);
-void ssi_tx_byte(u8);
-u8 ssi_rx_byte(void);
-
-
-#endif
diff --git a/include/asm-i386/interrupt.h b/include/asm-i386/interrupt.h
deleted file mode 100644
index 8d324d9..0000000
--- a/include/asm-i386/interrupt.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * (C) Copyright 2009
- * Graeme Russ, graeme.russ@gmail.com
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_INTERRUPT_H_
-#define __ASM_INTERRUPT_H_ 1
-
-/* cpu/i386/interrupts.c */
-void set_vector(u8 intnum, void *routine);
-
-/* arch/i386/lib/interupts.c */
-void disable_irq(int irq);
-void enable_irq(int irq);
-
-/* Architecture specific functions */
-void mask_irq(int irq);
-void unmask_irq(int irq);
-void specific_eoi(int irq);
-
-extern char exception_stack[];
-
-#define __isr__ void __attribute__ ((regparm(0)))
-
-#endif
diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h
deleted file mode 100644
index 9b757d4..0000000
--- a/include/asm-i386/io.h
+++ /dev/null
@@ -1,237 +0,0 @@
-#ifndef _ASM_IO_H
-#define _ASM_IO_H
-
-/*
- * This file contains the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl and the "string versions" of the same
- * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
- * versions of the single-IO instructions (inb_p/inw_p/..).
- *
- * This file is not meant to be obfuscating: it's just complicated
- * to (a) handle it all in a way that makes gcc able to optimize it
- * as well as possible and (b) trying to avoid writing the same thing
- * over and over again with slight variations and possibly making a
- * mistake somewhere.
- */
-
-/*
- * Thanks to James van Artsdalen for a better timing-fix than
- * the two short jumps: using outb's to a nonexistent port seems
- * to guarantee better timings even on fast machines.
- *
- * On the other hand, I'd like to be sure of a non-existent port:
- * I feel a bit unsafe about using 0x80 (should be safe, though)
- *
- *		Linus
- */
-
- /*
-  *  Bit simplified and optimized by Jan Hubicka
-  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
-  *
-  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
-  *  isa_read[wl] and isa_write[wl] fixed
-  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-  */
-
-#define IO_SPACE_LIMIT 0xffff
-
-
-#ifdef __KERNEL__
-
-
-/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the x86 architecture, we just read/write the
- * memory location directly.
- */
-
-#define readb(addr) (*(volatile unsigned char *) (addr))
-#define readw(addr) (*(volatile unsigned short *) (addr))
-#define readl(addr) (*(volatile unsigned int *) (addr))
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-
-#define writeb(b,addr) (*(volatile unsigned char *) (addr) = (b))
-#define writew(b,addr) (*(volatile unsigned short *) (addr) = (b))
-#define writel(b,addr) (*(volatile unsigned int *) (addr) = (b))
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
-
-#define memset_io(a,b,c)	memset((a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((a),(b),(c))
-
-/*
- * ISA space is 'always mapped' on a typical x86 system, no need to
- * explicitly ioremap() it. The fact that the ISA IO space is mapped
- * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
- * are physical addresses. The following constant pointer can be
- * used as the IO-area pointer (it can be iounmapped as well, so the
- * analogy with PCI is quite large):
- */
-#define isa_readb(a) readb((a))
-#define isa_readw(a) readw((a))
-#define isa_readl(a) readl((a))
-#define isa_writeb(b,a) writeb(b,(a))
-#define isa_writew(w,a) writew(w,(a))
-#define isa_writel(l,a) writel(l,(a))
-#define isa_memset_io(a,b,c)		memset_io((a),(b),(c))
-#define isa_memcpy_fromio(a,b,c)	memcpy_fromio((a),(b),(c))
-#define isa_memcpy_toio(a,b,c)		memcpy_toio((a),(b),(c))
-
-
-static inline int check_signature(unsigned long io_addr,
-	const unsigned char *signature, int length)
-{
-	int retval = 0;
-	do {
-		if (readb(io_addr) != *signature)
-			goto out;
-		io_addr++;
-		signature++;
-		length--;
-	} while (length);
-	retval = 1;
-out:
-	return retval;
-}
-
-/**
- *	isa_check_signature		-	find BIOS signatures
- *	@io_addr: mmio address to check
- *	@signature:  signature block
- *	@length: length of signature
- *
- *	Perform a signature comparison with the ISA mmio address io_addr.
- *	Returns 1 on a match.
- *
- *	This function is deprecated. New drivers should use ioremap and
- *	check_signature.
- */
-
-
-static inline int isa_check_signature(unsigned long io_addr,
-	const unsigned char *signature, int length)
-{
-	int retval = 0;
-	do {
-		if (isa_readb(io_addr) != *signature)
-			goto out;
-		io_addr++;
-		signature++;
-		length--;
-	} while (length);
-	retval = 1;
-out:
-	return retval;
-}
-
-#endif /* __KERNEL__ */
-
-#ifdef SLOW_IO_BY_JUMPING
-#define __SLOW_DOWN_IO "\njmp 1f\n1:\tjmp 1f\n1:"
-#else
-#define __SLOW_DOWN_IO "\noutb %%al,$0x80"
-#endif
-
-#ifdef REALLY_SLOW_IO
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO __SLOW_DOWN_IO
-#else
-#define __FULL_SLOW_DOWN_IO __SLOW_DOWN_IO
-#endif
-
-
-/*
- * Talk about misusing macros..
- */
-#define __OUT1(s,x) \
-static inline void out##s(unsigned x value, unsigned short port) {
-
-#define __OUT2(s,s1,s2) \
-__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
-
-
-#define __OUT(s,s1,x) \
-__OUT1(s,x) __OUT2(s,s1,"w") : : "a" (value), "Nd" (port)); } \
-__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd" (port));}
-
-#define __IN1(s) \
-static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
-
-#define __IN2(s,s1,s2) \
-__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
-
-#define __IN(s,s1,i...) \
-__IN1(s) __IN2(s,s1,"w") : "=a" (_v) : "Nd" (port) ,##i ); return _v; } \
-__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port) ,##i ); return _v; }
-
-#define __INS(s) \
-static inline void ins##s(unsigned short port, void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; ins" #s \
-: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
-
-#define __OUTS(s) \
-static inline void outs##s(unsigned short port, const void * addr, unsigned long count) \
-{ __asm__ __volatile__ ("rep ; outs" #s \
-: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
-
-#define RETURN_TYPE unsigned char
-__IN(b,"")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned short
-__IN(w,"")
-#undef RETURN_TYPE
-#define RETURN_TYPE unsigned int
-__IN(l,"")
-#undef RETURN_TYPE
-
-__OUT(b,"b",char)
-__OUT(w,"w",short)
-__OUT(l,,int)
-
-__INS(b)
-__INS(w)
-__INS(l)
-
-__OUTS(b)
-__OUTS(w)
-__OUTS(l)
-
-static inline void sync(void)
-{
-}
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-#define MAP_NOCACHE	(0)
-#define MAP_WRCOMBINE	(0)
-#define MAP_WRBACK	(0)
-#define MAP_WRTHROUGH	(0)
-
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
-	return (void *)paddr;
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
-
-}
-
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
-	return (phys_addr_t)(vaddr);
-}
-
-#endif
diff --git a/include/asm-i386/pci.h b/include/asm-i386/pci.h
deleted file mode 100644
index 050a2bb..0000000
--- a/include/asm-i386/pci.h
+++ /dev/null
@@ -1,34 +0,0 @@
-
-
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PCI_I386_H_
-#define _PCI_I386_H_	1
-
-void pci_setup_type1(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data);
-int pci_enable_legacy_video_ports(struct pci_controller* hose);
-int pci_shadow_rom(pci_dev_t dev, unsigned char *dest);
-void pci_remove_rom_window(struct pci_controller* hose, u32 addr);
-u32 pci_get_rom_window(struct pci_controller* hose, int size);
-#endif
diff --git a/include/asm-i386/posix_types.h b/include/asm-i386/posix_types.h
deleted file mode 100644
index 5529f32..0000000
--- a/include/asm-i386/posix_types.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef __ARCH_I386_POSIX_TYPES_H
-#define __ARCH_I386_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc.  Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short	__kernel_dev_t;
-typedef unsigned long	__kernel_ino_t;
-typedef unsigned short	__kernel_mode_t;
-typedef unsigned short	__kernel_nlink_t;
-typedef long		__kernel_off_t;
-typedef int		__kernel_pid_t;
-typedef unsigned short	__kernel_ipc_pid_t;
-typedef unsigned short	__kernel_uid_t;
-typedef unsigned short	__kernel_gid_t;
-typedef unsigned int	__kernel_size_t;
-typedef int		__kernel_ssize_t;
-typedef int		__kernel_ptrdiff_t;
-typedef long		__kernel_time_t;
-typedef long		__kernel_suseconds_t;
-typedef long		__kernel_clock_t;
-typedef int		__kernel_daddr_t;
-typedef char *		__kernel_caddr_t;
-typedef unsigned short	__kernel_uid16_t;
-typedef unsigned short	__kernel_gid16_t;
-typedef unsigned int	__kernel_uid32_t;
-typedef unsigned int	__kernel_gid32_t;
-
-typedef unsigned short	__kernel_old_uid_t;
-typedef unsigned short	__kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long	__kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
-	int	val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-	int	__val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef	__FD_SET
-#define __FD_SET(fd,fdsetp) \
-		__asm__ __volatile__("btsl %1,%0": \
-			"=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
-
-#undef	__FD_CLR
-#define __FD_CLR(fd,fdsetp) \
-		__asm__ __volatile__("btrl %1,%0": \
-			"=m" (*(__kernel_fd_set *) (fdsetp)):"r" ((int) (fd)))
-
-#undef	__FD_ISSET
-#define __FD_ISSET(fd,fdsetp) (__extension__ ({ \
-		unsigned char __result; \
-		__asm__ __volatile__("btl %1,%2 ; setb %0" \
-			:"=q" (__result) :"r" ((int) (fd)), \
-			"m" (*(__kernel_fd_set *) (fdsetp))); \
-		__result; }))
-
-#undef	__FD_ZERO
-#define __FD_ZERO(fdsetp) \
-do { \
-	int __d0, __d1; \
-	__asm__ __volatile__("cld ; rep ; stosl" \
-			:"=m" (*(__kernel_fd_set *) (fdsetp)), \
-			  "=&c" (__d0), "=&D" (__d1) \
-			:"a" (0), "1" (__FDSET_LONGS), \
-			"2" ((__kernel_fd_set *) (fdsetp)) : "memory"); \
-} while (0)
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif
diff --git a/include/asm-i386/processor.h b/include/asm-i386/processor.h
deleted file mode 100644
index 5dedba8..0000000
--- a/include/asm-i386/processor.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_PROCESSOR_H_
-#define __ASM_PROCESSOR_H_ 1
-/* Currently this header is unused in the i386 port
- * but some generic files #include <asm/processor.h>
- * so this file is a placeholder. */
-#endif
diff --git a/include/asm-i386/ptrace.h b/include/asm-i386/ptrace.h
deleted file mode 100644
index 750e40d..0000000
--- a/include/asm-i386/ptrace.h
+++ /dev/null
@@ -1,66 +0,0 @@
-#ifndef _I386_PTRACE_H
-#define _I386_PTRACE_H
-
-#define EBX 0
-#define ECX 1
-#define EDX 2
-#define ESI 3
-#define EDI 4
-#define EBP 5
-#define EAX 6
-#define DS 7
-#define ES 8
-#define FS 9
-#define GS 10
-#define ORIG_EAX 11
-#define EIP 12
-#define CS  13
-#define EFL 14
-#define UESP 15
-#define SS   16
-#define FRAME_SIZE 17
-
-/* this struct defines the way the registers are stored on the
-   stack during a system call. */
-
-struct pt_regs {
-	long ebx;
-	long ecx;
-	long edx;
-	long esi;
-	long edi;
-	long ebp;
-	long eax;
-	int  xds;
-	int  xes;
-	int  xfs;
-	int  xgs;
-	long orig_eax;
-	long eip;
-	int  xcs;
-	long eflags;
-	long esp;
-	int  xss;
-}  __attribute__ ((packed));
-
-
-/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-#define PTRACE_GETREGS            12
-#define PTRACE_SETREGS            13
-#define PTRACE_GETFPREGS          14
-#define PTRACE_SETFPREGS          15
-#define PTRACE_GETFPXREGS         18
-#define PTRACE_SETFPXREGS         19
-
-#define PTRACE_SETOPTIONS         21
-
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD     0x00000001
-
-#ifdef __KERNEL__
-#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (3 & (regs)->xcs))
-#define instruction_pointer(regs) ((regs)->eip)
-extern void show_regs(struct pt_regs *);
-#endif
-
-#endif
diff --git a/include/asm-i386/realmode.h b/include/asm-i386/realmode.h
deleted file mode 100644
index 9177e4e..0000000
--- a/include/asm-i386/realmode.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_REALMODE_H_
-#define __ASM_REALMODE_H_
-#include <asm/ptrace.h>
-
-int bios_setup(void);
-int enter_realmode(u16 seg, u16 off, struct pt_regs *in, struct pt_regs *out);
-int enter_realmode_int(u8 lvl, struct pt_regs *in, struct pt_regs *out);
-
-#endif
diff --git a/include/asm-i386/string.h b/include/asm-i386/string.h
deleted file mode 100644
index 3643a79..0000000
--- a/include/asm-i386/string.h
+++ /dev/null
@@ -1,32 +0,0 @@
-#ifndef __ASM_I386_STRING_H
-#define __ASM_I386_STRING_H
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-#undef __HAVE_ARCH_STRNCPY
-extern char *strncpy(char *__dest, __const__ char *__src, __kernel_size_t __n);
-
-#undef __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#undef __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#undef __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMZERO
-extern void memzero(void *ptr, __kernel_size_t n);
-
-#endif
diff --git a/include/asm-i386/types.h b/include/asm-i386/types.h
deleted file mode 100644
index 9a40e38..0000000
--- a/include/asm-i386/types.h
+++ /dev/null
@@ -1,53 +0,0 @@
-#ifndef __ASM_I386_TYPES_H
-#define __ASM_I386_TYPES_H
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide.  */
-
-typedef u32 dma_addr_t;
-
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/include/asm-i386/u-boot-i386.h b/include/asm-i386/u-boot-i386.h
deleted file mode 100644
index a08632d..0000000
--- a/include/asm-i386/u-boot-i386.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _U_BOOT_I386_H_
-#define _U_BOOT_I386_H_	1
-
-/* cpu/.../cpu.c */
-int cpu_init_r(void);
-int cpu_init_f(void);
-
-/* cpu/.../timer.c */
-void timer_isr(void *);
-typedef void (timer_fnc_t) (void);
-int register_timer_isr (timer_fnc_t *isr_func);
-
-/* Architecture specific - can be in cpu/i386/, arch/i386/lib/, or $(BOARD)/ */
-int timer_init(void);
-
-/* cpu/.../interrupts.c */
-int cpu_init_interrupts(void);
-
-/* board/.../... */
-int board_init(void);
-int dram_init(void);
-
-void isa_unmap_rom(u32 addr);
-u32 isa_map_rom(u32 bus_addr, int size);
-
-/* arch/i386/lib/... */
-int video_bios_init(void);
-int video_init(void);
-
-
-#endif	/* _U_BOOT_I386_H_ */
diff --git a/include/asm-i386/u-boot.h b/include/asm-i386/u-boot.h
deleted file mode 100644
index 9a1eec0..0000000
--- a/include/asm-i386/u-boot.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************
- * NOTE: This header file defines an interface to U-Boot. Including
- * this (unmodified) header file in another file is considered normal
- * use of U-Boot, and does *not* fall under the heading of "derived
- * work".
- ********************************************************************
- */
-
-#ifndef _U_BOOT_H_
-#define _U_BOOT_H_	1
-
-typedef struct bd_info {
-	unsigned long	bi_memstart;	/* start of DRAM memory */
-	phys_size_t	bi_memsize;	/* size	 of DRAM memory in bytes */
-	unsigned long	bi_flashstart;	/* start of FLASH memory */
-	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
-	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
-	unsigned long	bi_sramstart;	/* start of SRAM memory */
-	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
-	unsigned long	bi_ip_addr;	/* IP Address */
-	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
-	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
-	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_baudrate;	/* Console Baudrate */
-	unsigned long   bi_boot_params;	/* where this board expects params */
-	struct environment_s	       *bi_env;
-	struct				/* RAM configuration */
-	{
-		ulong start;
-		ulong size;
-	}bi_dram[CONFIG_NR_DRAM_BANKS];
-} bd_t;
-
-#define bi_env_data bi_env->data
-#define bi_env_crc  bi_env->crc
-
-#endif	/* _U_BOOT_H_ */
diff --git a/include/asm-i386/zimage.h b/include/asm-i386/zimage.h
deleted file mode 100644
index b6266e4..0000000
--- a/include/asm-i386/zimage.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, daniel@omicron.se
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_ZIMAGE_H_
-#define _ASM_ZIMAGE_H_
-
-/* linux i386 zImage/bzImage header. Offsets relative to
- * the start of the image */
-
-#define CMD_LINE_MAGIC_OFF  0x020 /* Magic 0xa33f if the offset below is valid */
-#define CMD_LINE_OFFSET_OFF 0x022 /* Offset to comandline */
-#define SETUP_SECTS_OFF     0x1F1 /* The size of the setup in sectors */
-#define ROOT_FLAGS_OFF      0x1F2 /* If set, the root is mounted readonly */
-#define VID_MODE_OFF        0x1FA /* Video mode control */
-#define ROOT_DEV_OFF        0x1FC /* Default root device number */
-#define BOOT_FLAG_OFF       0x1FE /* 0xAA55 magic number */
-#define HEADER_OFF          0x202 /* Magic signature "HdrS" */
-#define VERSION_OFF         0x206 /* Boot protocol version supported */
-#define REALMODE_SWTCH_OFF  0x208 /* Boot loader hook (see below) */
-#define START_SYS_OFF       0x20C /* Points to kernel version string */
-#define TYPE_OF_LOADER_OFF  0x210 /* Boot loader identifier */
-#define LOADFLAGS_OFF       0x211 /* Boot protocol option flags */
-#define SETUP_MOVE_SIZE_OFF 0x212 /* Move to high memory size (used with hooks) */
-#define CODE32_START_OFF    0x214 /* Boot loader hook (see below) */
-#define RAMDISK_IMAGE_OFF   0x218 /* initrd load address (set by boot loader) */
-#define RAMDISK_SIZE_OFF    0x21C /* initrd size (set by boot loader) */
-#define HEAP_END_PTR_OFF    0x224 /* Free memory after setup end */
-#define CMD_LINE_PTR_OFF    0x228 /* 32-bit pointer to the kernel command line */
-
-
-#define HEAP_FLAG           0x80
-#define BIG_KERNEL_FLAG     0x01
-
-/* magic numbers */
-#define KERNEL_MAGIC        0xaa55
-#define KERNEL_V2_MAGIC     0x53726448
-#define COMMAND_LINE_MAGIC  0xA33F
-
-/* limits */
-#define BZIMAGE_MAX_SIZE   15*1024*1024     /* 15MB */
-#define ZIMAGE_MAX_SIZE    512*1024         /* 512k */
-#define SETUP_MAX_SIZE     32768
-
-#define SETUP_START_OFFSET 0x200
-#define BZIMAGE_LOAD_ADDR  0x100000
-#define ZIMAGE_LOAD_ADDR   0x10000
-
-void *load_zimage(char *image, unsigned long kernel_size,
-		  unsigned long initrd_addr, unsigned long initrd_size,
-		  int auto_boot);
-
-void boot_zimage(void *setup_base);
-
-#endif