diff options
author | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2008-10-16 15:01:15 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-10-18 21:54:03 +0200 |
commit | 6d0f6bcf337c5261c08fabe12982178c2c489d76 (patch) | |
tree | ae13958ffa9c6b58c2ea97aac07a4ad2f04a350f /include/configs/BAB7xx.h | |
parent | 71edc271816ec82cf0550dd6980be2da3cc2ad9e (diff) | |
download | bootable_bootloader_goldelico_gta04-6d0f6bcf337c5261c08fabe12982178c2c489d76.zip bootable_bootloader_goldelico_gta04-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.gz bootable_bootloader_goldelico_gta04-6d0f6bcf337c5261c08fabe12982178c2c489d76.tar.bz2 |
rename CFG_ macros to CONFIG_SYS
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Diffstat (limited to 'include/configs/BAB7xx.h')
-rw-r--r-- | include/configs/BAB7xx.h | 312 |
1 files changed, 156 insertions, 156 deletions
diff --git a/include/configs/BAB7xx.h b/include/configs/BAB7xx.h index bfbda52..1910b34 100644 --- a/include/configs/BAB7xx.h +++ b/include/configs/BAB7xx.h @@ -63,7 +63,7 @@ "bootm" #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ -#define CFG_LOADS_BAUD_CHANGE /* allow baudrate changes */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ /* * BOOTP options @@ -93,8 +93,8 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ /* * choose between COM1 and COM2 as serial console @@ -102,105 +102,105 @@ #define CONFIG_CONS_INDEX 1 #if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0x00000000 /* memtest works on */ -#define CFG_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 64 MB in DRAM */ -#define CFG_LOAD_ADDR 0x1000000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ -#define CFG_HZ 1000 /* dec. freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* dec. freq: 1 ms ticks */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) * You should know what you are doing if you make changes here. */ -#define CFG_BOARD_ASM_INIT +#define CONFIG_SYS_BOARD_ASM_INIT #define CONFIG_MISC_INIT_R /* * Choose the address mapping scheme for the MPC106 mem controller. * Default is mapping B (CHRP), set this define to choose mapping A (PReP). */ -#define CFG_ADDRESS_MAP_A -#ifdef CFG_ADDRESS_MAP_A +#define CONFIG_SYS_ADDRESS_MAP_A +#ifdef CONFIG_SYS_ADDRESS_MAP_A -#define CFG_PCI_MEMORY_BUS 0x80000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x80000000 +#define CONFIG_SYS_PCI_MEMORY_BUS 0x80000000 +#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 -#define CFG_PCI_MEM_BUS 0x00000000 -#define CFG_PCI_MEM_PHYS 0xc0000000 -#define CFG_PCI_MEM_SIZE 0x3f000000 +#define CONFIG_SYS_PCI_MEM_BUS 0x00000000 +#define CONFIG_SYS_PCI_MEM_PHYS 0xc0000000 +#define CONFIG_SYS_PCI_MEM_SIZE 0x3f000000 -#define CFG_ISA_MEM_BUS 0 -#define CFG_ISA_MEM_PHYS 0 -#define CFG_ISA_MEM_SIZE 0 +#define CONFIG_SYS_ISA_MEM_BUS 0 +#define CONFIG_SYS_ISA_MEM_PHYS 0 +#define CONFIG_SYS_ISA_MEM_SIZE 0 -#define CFG_PCI_IO_BUS 0x1000 -#define CFG_PCI_IO_PHYS 0x81000000 -#define CFG_PCI_IO_SIZE 0x01000000-CFG_PCI_IO_BUS +#define CONFIG_SYS_PCI_IO_BUS 0x1000 +#define CONFIG_SYS_PCI_IO_PHYS 0x81000000 +#define CONFIG_SYS_PCI_IO_SIZE 0x01000000-CONFIG_SYS_PCI_IO_BUS -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0x80000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CONFIG_SYS_ISA_IO_BUS 0x00000000 +#define CONFIG_SYS_ISA_IO_PHYS 0x80000000 +#define CONFIG_SYS_ISA_IO_SIZE 0x00800000 #else -#define CFG_PCI_MEMORY_BUS 0x00000000 -#define CFG_PCI_MEMORY_PHYS 0x00000000 -#define CFG_PCI_MEMORY_SIZE 0x40000000 +#define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 +#define CONFIG_SYS_PCI_MEMORY_SIZE 0x40000000 -#define CFG_PCI_MEM_BUS 0x80000000 -#define CFG_PCI_MEM_PHYS 0x80000000 -#define CFG_PCI_MEM_SIZE 0x7d000000 +#define CONFIG_SYS_PCI_MEM_BUS 0x80000000 +#define CONFIG_SYS_PCI_MEM_PHYS 0x80000000 +#define CONFIG_SYS_PCI_MEM_SIZE 0x7d000000 -#define CFG_ISA_MEM_BUS 0x00000000 -#define CFG_ISA_MEM_PHYS 0xfd000000 -#define CFG_ISA_MEM_SIZE 0x01000000 +#define CONFIG_SYS_ISA_MEM_BUS 0x00000000 +#define CONFIG_SYS_ISA_MEM_PHYS 0xfd000000 +#define CONFIG_SYS_ISA_MEM_SIZE 0x01000000 -#define CFG_PCI_IO_BUS 0x00800000 -#define CFG_PCI_IO_PHYS 0xfe800000 -#define CFG_PCI_IO_SIZE 0x00400000 +#define CONFIG_SYS_PCI_IO_BUS 0x00800000 +#define CONFIG_SYS_PCI_IO_PHYS 0xfe800000 +#define CONFIG_SYS_PCI_IO_SIZE 0x00400000 -#define CFG_ISA_IO_BUS 0x00000000 -#define CFG_ISA_IO_PHYS 0xfe000000 -#define CFG_ISA_IO_SIZE 0x00800000 +#define CONFIG_SYS_ISA_IO_BUS 0x00000000 +#define CONFIG_SYS_ISA_IO_PHYS 0xfe000000 +#define CONFIG_SYS_ISA_IO_SIZE 0x00800000 -#endif /*CFG_ADDRESS_MAP_A */ +#endif /*CONFIG_SYS_ADDRESS_MAP_A */ -#define CFG_60X_PCI_MEM_OFFSET 0x00000000 +#define CONFIG_SYS_60X_PCI_MEM_OFFSET 0x00000000 /* driver defines FDC,IDE,... */ -#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS -#define CFG_ISA_IO CFG_ISA_IO_PHYS -#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS +#define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_PHYS +#define CONFIG_SYS_ISA_IO CONFIG_SYS_ISA_IO_PHYS +#define CONFIG_SYS_60X_PCI_IO_OFFSET CONFIG_SYS_ISA_IO_PHYS /* * Start addresses for the final memory configuration * (Set up by the startup code) - * Please note that CFG_SDRAM_BASE _must_ start at 0 + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_FLASH_BASE 0xfff00000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* * Definitions for initial stack pointer and data area */ -#define CFG_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ -#define CFG_INIT_RAM_END 0x4000 -#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ -#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) -#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET +#define CONFIG_SYS_INIT_RAM_ADDR 0x00fd0000 /* above the memtest region */ +#define CONFIG_SYS_INIT_RAM_END 0x4000 +#define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for init data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* * Flash mapping/organization on the MPC10x. @@ -208,11 +208,11 @@ #define FLASH_BASE0_PRELIM 0xff800000 #define FLASH_BASE1_PRELIM 0xffc00000 -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ -#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ /* * JFFS2 partitions @@ -234,36 +234,36 @@ #define MTDPARTS_DEFAULT "mtdparts=bab7xx-0:-(jffs2)" */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ -#define CFG_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */ -#undef CFG_MEMTEST +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN 0x20000 /* Reserve 128 kB for malloc() */ +#undef CONFIG_SYS_MEMTEST /* * Environment settings */ #define CONFIG_ENV_OVERWRITE #define CONFIG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */ -#define CFG_NVRAM_SIZE 0x1ff0 /* NVRAM size (8kB), we must protect the clock data (16 bytes) */ +#define CONFIG_SYS_NVRAM_SIZE 0x1ff0 /* NVRAM size (8kB), we must protect the clock data (16 bytes) */ #define CONFIG_ENV_SIZE 0x400 /* Size of Environment vars (1kB) */ /* * We store the environment and an image of revision eeprom in the upper part of the NVRAM. Thus, * user applications can use the remaining space for other purposes. */ -#define CONFIG_ENV_ADDR (CFG_NVRAM_SIZE +0x10 -0x800) -#define CFG_NV_SROM_COPY_ADDR (CFG_NVRAM_SIZE +0x10 -0x400) -#define CFG_NVRAM_ACCESS_ROUTINE /* This board needs a special routine to access the NVRAM */ -#define CFG_SROM_SIZE 0x100 /* shadow of revision info is in nvram */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_SIZE +0x10 -0x800) +#define CONFIG_SYS_NV_SROM_COPY_ADDR (CONFIG_SYS_NVRAM_SIZE +0x10 -0x400) +#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE /* This board needs a special routine to access the NVRAM */ +#define CONFIG_SYS_SROM_SIZE 0x100 /* shadow of revision info is in nvram */ /* * Serial devices */ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 1 -#define CFG_NS16550_CLK 1843200 -#define CFG_NS16550_COM1 (CFG_ISA_IO + CFG_NS87308_UART1_BASE) -#define CFG_NS16550_COM2 (CFG_ISA_IO + CFG_NS87308_UART2_BASE) +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK 1843200 +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE) /* * PCI stuff @@ -284,7 +284,7 @@ #define CONFIG_CONSOLE_TIME #define CONFIG_CONSOLE_EXTRA_INFO #define CONFIG_CONSOLE_CURSOR -#define CFG_CONSOLE_BLINK_COUNT 30000 /* approx. 2 HZ */ +#define CONFIG_SYS_CONSOLE_BLINK_COUNT 30000 /* approx. 2 HZ */ /* * IDE/SCSI globals @@ -302,15 +302,15 @@ extern unsigned char scsi_sym53c8xx_ccf; * ATAPI Support (experimental) */ #define CONFIG_ATAPI -#define CFG_IDE_MAXBUS 1 /* max. 2 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 2 IDE busses */ +#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */ -#define CFG_ATA_BASE_ADDR CFG_60X_PCI_IO_OFFSET /* base address */ -#define CFG_ATA_IDE0_OFFSET 0x1F0 /* default ide0 offste */ -#define CFG_ATA_IDE1_OFFSET 0x170 /* default ide1 offset */ -#define CFG_ATA_DATA_OFFSET 0 /* data reg offset */ -#define CFG_ATA_REG_OFFSET 0 /* reg offset */ -#define CFG_ATA_ALT_OFFSET 0x200 /* alternate register offset */ +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_60X_PCI_IO_OFFSET /* base address */ +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1F0 /* default ide0 offste */ +#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 /* default ide1 offset */ +#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ +#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ #define ATA_RESET_TIME (ata_reset_time) @@ -322,11 +322,11 @@ extern unsigned char scsi_sym53c8xx_ccf; */ #define CONFIG_SCSI_SYM53C8XX #define CONFIG_SCSI_DEV_ID (scsi_dev_id) /* 875 or 860 */ -#define CFG_SCSI_SYM53C8XX_CCF (scsi_sym53c8xx_ccf) /* value for none 40 mhz clocks */ -#define CFG_SCSI_MAX_LUN 8 /* number of supported LUNs */ -#define CFG_SCSI_MAX_SCSI_ID (scsi_max_scsi_id) /* max SCSI ID (0-6) */ -#define CFG_SCSI_MAX_DEVICE (15 * CFG_SCSI_MAX_LUN) /* max. Target devices */ -#define CFG_SCSI_SPIN_UP_TIME (scsi_reset_time) +#define CONFIG_SYS_SCSI_SYM53C8XX_CCF (scsi_sym53c8xx_ccf) /* value for none 40 mhz clocks */ +#define CONFIG_SYS_SCSI_MAX_LUN 8 /* number of supported LUNs */ +#define CONFIG_SYS_SCSI_MAX_SCSI_ID (scsi_max_scsi_id) /* max SCSI ID (0-6) */ +#define CONFIG_SYS_SCSI_MAX_DEVICE (15 * CONFIG_SYS_SCSI_MAX_LUN) /* max. Target devices */ +#define CONFIG_SYS_SCSI_SPIN_UP_TIME (scsi_reset_time) /* * Partion suppport @@ -339,40 +339,40 @@ extern unsigned char scsi_sym53c8xx_ccf; * Winbond Configuration */ #define CONFIG_WINBOND_83C553 1 /* has a winbond bridge */ -#define CFG_USE_WINBOND_IDE 0 /* use winbond 83c553 internal ide */ -#define CFG_WINBOND_ISA_CFG_ADDR 0x80005800 /* pci-isa bridge config addr */ -#define CFG_WINBOND_IDE_CFG_ADDR 0x80005900 /* ide config addr */ +#define CONFIG_SYS_USE_WINBOND_IDE 0 /* use winbond 83c553 internal ide */ +#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /* pci-isa bridge config addr */ +#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /* ide config addr */ /* * NS87308 Configuration */ #define CONFIG_NS87308 /* Nat Semi super-io cntr on ISA bus */ -#define CFG_NS87308_BADDR_10 1 -#define CFG_NS87308_DEVS (CFG_NS87308_UART1 | \ - CFG_NS87308_UART2 | \ - CFG_NS87308_KBC1 | \ - CFG_NS87308_MOUSE | \ - CFG_NS87308_FDC | \ - CFG_NS87308_RARP | \ - CFG_NS87308_GPIO | \ - CFG_NS87308_POWRMAN | \ - CFG_NS87308_RTC_APC ) - -#define CFG_NS87308_PS2MOD -#define CFG_NS87308_GPIO_BASE 0x0220 -#define CFG_NS87308_PWMAN_BASE 0x0460 -#define CFG_NS87308_PMC2 0x00 /* SuperI/O clock source is 24MHz via X1 */ +#define CONFIG_SYS_NS87308_BADDR_10 1 +#define CONFIG_SYS_NS87308_DEVS (CONFIG_SYS_NS87308_UART1 | \ + CONFIG_SYS_NS87308_UART2 | \ + CONFIG_SYS_NS87308_KBC1 | \ + CONFIG_SYS_NS87308_MOUSE | \ + CONFIG_SYS_NS87308_FDC | \ + CONFIG_SYS_NS87308_RARP | \ + CONFIG_SYS_NS87308_GPIO | \ + CONFIG_SYS_NS87308_POWRMAN | \ + CONFIG_SYS_NS87308_RTC_APC ) + +#define CONFIG_SYS_NS87308_PS2MOD +#define CONFIG_SYS_NS87308_GPIO_BASE 0x0220 +#define CONFIG_SYS_NS87308_PWMAN_BASE 0x0460 +#define CONFIG_SYS_NS87308_PMC2 0x00 /* SuperI/O clock source is 24MHz via X1 */ /* * set up the NVRAM access registers * NVRAM's controlled by the configurable CS line from the 87308 */ -#define CFG_NS87308_CS0_BASE 0x0076 -#define CFG_NS87308_CS0_CONF 0x40 -#define CFG_NS87308_CS1_BASE 0x0070 -#define CFG_NS87308_CS1_CONF 0x1C -#define CFG_NS87308_CS2_BASE 0x0071 -#define CFG_NS87308_CS2_CONF 0x1C +#define CONFIG_SYS_NS87308_CS0_BASE 0x0076 +#define CONFIG_SYS_NS87308_CS0_CONF 0x40 +#define CONFIG_SYS_NS87308_CS1_BASE 0x0070 +#define CONFIG_SYS_NS87308_CS1_CONF 0x1C +#define CONFIG_SYS_NS87308_CS2_BASE 0x0071 +#define CONFIG_SYS_NS87308_CS2_CONF 0x1C #define CONFIG_RTC_MK48T59 @@ -381,51 +381,51 @@ extern unsigned char scsi_sym53c8xx_ccf; */ #if 1 -#define CFG_IBAT0L 0 -#define CFG_IBAT0U 0 -#define CFG_DBAT0L CFG_IBAT1L -#define CFG_DBAT0U CFG_IBAT1U +#define CONFIG_SYS_IBAT0L 0 +#define CONFIG_SYS_IBAT0U 0 +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U -#define CFG_IBAT1L 0 -#define CFG_IBAT1U 0 -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_IBAT1L 0 +#define CONFIG_SYS_IBAT1U 0 +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U -#define CFG_IBAT2L 0 -#define CFG_IBAT2U 0 -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U +#define CONFIG_SYS_IBAT2L 0 +#define CONFIG_SYS_IBAT2U 0 +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U -#define CFG_IBAT3L 0 -#define CFG_IBAT3U 0 -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L 0 +#define CONFIG_SYS_IBAT3U 0 +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U #else /* SDRAM */ -#define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_RW) -#define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) -#define CFG_DBAT0L CFG_IBAT1L -#define CFG_DBAT0U CFG_IBAT1U +#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_RW) +#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT1U /* address range for flashes */ -#define CFG_IBAT1L (CFG_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT1U (CFG_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_DBAT1L CFG_IBAT1L -#define CFG_DBAT1U CFG_IBAT1U +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_FLASH_BASE | BATL_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT1U (CONFIG_SYS_FLASH_BASE | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L +#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U /* ISA IO space */ -#define CFG_IBAT2L (CFG_ISA_IO | BATL_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT2U (CFG_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_DBAT2L CFG_IBAT2L -#define CFG_DBAT2U CFG_IBAT2U +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_ISA_IO | BATL_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2U (CONFIG_SYS_ISA_IO | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L +#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U /* ISA memory space */ -#define CFG_IBAT3L (CFG_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT) -#define CFG_IBAT3U (CFG_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP) -#define CFG_DBAT3L CFG_IBAT3L -#define CFG_DBAT3U CFG_IBAT3U +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_ISA_MEM | BATL_RW | BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U (CONFIG_SYS_ISA_MEM | BATU_BL_16M | BATU_VS | BATU_VP) +#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L +#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U #endif @@ -436,35 +436,35 @@ extern unsigned char scsi_sym53c8xx_ccf; extern unsigned long bab7xx_get_bus_freq (void); extern unsigned long bab7xx_get_gclk_freq (void); #endif -#define CFG_BUS_HZ bab7xx_get_bus_freq() -#define CFG_BUS_CLK CFG_BUS_HZ -#define CFG_CPU_CLK bab7xx_get_gclk_freq() +#define CONFIG_SYS_BUS_HZ bab7xx_get_bus_freq() +#define CONFIG_SYS_BUS_CLK CONFIG_SYS_BUS_HZ +#define CONFIG_SYS_CPU_CLK bab7xx_get_gclk_freq() /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* * Cache Configuration */ -#define CFG_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ #if defined(CONFIG_CMD_KGDB) -#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ #endif /* * L2 Cache Configuration is board specific for BAB740/BAB750 * Init values read from revision srom. */ -#undef CFG_L2 +#undef CONFIG_SYS_L2 #define L2_INIT (L2CR_L2SIZ_HM | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) #define L2_ENABLE (L2_INIT | L2CR_L2E) -#define CFG_L2_BAB7xx +#define CONFIG_SYS_L2_BAB7xx /* * Internal Definitions |